Professional Documents
Culture Documents
Contents ISO 527-1:1993 Plastics Determination of tensile properties Part 1: General principles ISO 527-1:1993 / Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 527-1:1993 ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets ISO 527-3:1995 /Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 527-3:1995 ISO 527-3:1995 /Cor. 2:2001 Technical Corrigendum 2:2001 to ISO 527-3:1995 ISO 1513:1992 Paints and varnishes Examination and preparation of samples for testing ISO 1513:1992 /Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 1513:1992 ISO 1514:1993 Paints and varnishes Standard panels for testing ISO 1516:1981 Paints, varnishes, petroleum and related products Flash/no flash test Closed cup equilibrium method ISO 1517:1973 Paints and varnishes Surface-drying test Ballotini method ISO 1518:1992 Paints and varnishes Scratch test ISO 1519:1973 Paints and varnishes Bend test (cylindrical mandrel) ISO 1520:1999 Paints and varnishes Cupping test ISO 1522:1998 Paints and varnishes Pendulum damping test ISO 1522:1998 /Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 1522:1998 ISO 1523:1983 Paints, varnishes, petroleum and related products Determination offlashpoint Closed cup equilibrium method ISO 1524:2000 Paints, varnishes and printing inks Determination of fineness of grind ISO 2409:1992 Paints and varnishes Cross-cut test ISO 2431:1993 Paints and varnishes Determination of flow time by use of flow cups ISO 2431:1993 / Cor. 1:1994 Technical Corrigendum 1:1994 to ISO 2431:1993 Paints and varnishes, Ed. 3, Vol. 1 Page 2 of 4 ISO 2431:1993 / Cor. 2:1999 Technical Corrigendum 2:1999 to ISO 2431:1993 ISO 2808:1997 Paints and varnishes Determination of film thickness ISO 2810:1974 Paints and varnishes Notes for guidance on the conduct of natural weathering tests ISO 2811-1:1997 Paints and varnishes Determination of density Part 1: Pyknometer method ISO 2811-2:1997 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method ISO 2811-3:1997 Paints and varnishes Determination of density Part 3: Oscillation method ISO 2811-4:1997 Paints and varnishes Determination of density Part 4: Pressure cup method ISO 2812-1:1993 Paints and varnishes Determination of resistance to liquids Part 1: General methods ISO 2812-2:1993 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method ISO 2813:1994 Paints and varnishes Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees ISO 2813:1994 / Cor. 1:1997 Technical Corrigendum 1:1997 to ISO 2813:1994 ISO 2814:1973 Paints and varnishes Comparison of contrast ratio (hiding power) of paints of the same type and colour ISO 2815:1973 Paints and varnishes Buchholz indentation test ISO 2884-1:1999 Paints and varnishes Determination of viscosity using rotary viscometers Part 1: Cone-and-plate viscometer operated at a high rate of shear ISO 3231:1993 Paints and varnishes Determination of resistance to humid atmospheres containing sulfur dioxide ISO 3233:1998 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating ISO 3233:1998 /Cor. 1:1999 Technical Corrigendum 1:1999 to ISO 3233:1998 ISO 3248:1998 Paints and varnishes Determination of the effect of heat ISO 3251:1993 Paints and varnishes Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes ISO 3270:1984 Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing ISO 3668:1998 Paints and varnishes Visual comparison of the colour of paints ISO 3678:1976 Paints and varnishes Print-free test Paints and varnishes, Ed. 3, Vol. 1 Page 3 of 4 ISO 3679:1983 Paints, varnishes, petroleum and related products Determination of flashpoint Rapid equilibrium method ISO 3680:1983 Paints, varnishes, petroleum and related products Flash/no flash test Rapid equilibrium method
ISO 3856-1:1984 Paints and varnishes Determination of "soluble" metal content Part 1: Determination of lead content Flame atomic absorption spectrometric method and dithizone spectrophotometric method ISO 3856-2:1984 Paints and varnishes Determination of "soluble" metal content Part 2: Determination of antimony content Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method ISO 3856-3:1984 Paints and varnishes Determination of "soluble" metal content Part 3: Determination of barium content Flame atomic emission spectrometric method ISO 3856-4:1984 Paints and varnishes Determination of "soluble" metal content Part 4: Determination of cadmium content Flame atomic absorption spectrometric method and polarographic method ISO 3856-5:1984 Paints and varnishes Determination of "soluble" metal content Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form Diphenylcarbazide spectrophotometric method ISO 3856-6:1984 Paints and varnishes Determination of "soluble" metal content Part 6: Determination of total chromium content of the liquid portion of the paint Flame atomic absorption spectrometric method ISO 3856-7:1984 Paints and varnishes Determination of "soluble" metal content Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints Flameless atomic absorption spectrometric method ISO 4617:2000 Paints and varnishes List of equivalent terms ISO 4618-1:1998 Paints and varnishes Terms and definitions for coating materials Part 1: General terms ISO 4618-2:1999 Paints and varnishes Terms and definitions for coating materials Part 2: Special terms relating to paint characteristics and properties ISO 4618-3:1999 Paints and varnishes Terms and definitions for coating materials Part 3: Surface preparation and methods of application ISO 4622:1992 Paints and varnishes Pressure test for stackability ISO 4623-1:2000 Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates ISO 4624:1978 Paints and varnishes Pull-off test for adhesion ISO 4628-1:1982 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 1: General principles and rating schemes ISO 4628-2:1982 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 2: Designation of degree of blistering Paints and varnishes, Ed. 3, Vol. 1 Page 4 of 4 ISO 4628-3:1982 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 3: Designation of degree of rusting ISO 4628-4:1982 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 4: Designation of degree of cracking ISO 4628-5:1982 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 5: Designation of degree of flaking ISO 4628-6:1990 Paints and varnishes Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defect Part 6: Rating of degree of chalking by tape method ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation ISO 6272:1993 Paints and varnishes Falling-weight test Subject index Concordance list of ISO and ASTM standards
ISO 11998:1998 Paints and varnishes Determination of wet-scrub resistance and cleanability of coatings ISO 12137-1:1997 Paints and varnishes Determination of mar resistance Part 1: Method using a curved stylus ISO 12137-1:1997 / Cor. 1:1998 Technical Corrigendum 1:1998 to ISO 12137-1:1997 ISO 12137-2:1997 Paints and varnishes Determination of mar resistance Part 2: Method using a pointed stylus ISO 13803:2000 Paints and varnishes Determination of reflection haze on paint films at 20 degrees ISO 14680-1:2000 Paints and varnishes Determination of pigment content Part 1: Centrifuge method ISO 14680-2:2000 Paints and varnishes Determination of pigment content Part 2: Ashing method ISO 14680-3:2000 Paints and varnishes Determination of pigment content Part 3: Filtration method ISO 15181-1:2000 Paints and varnishes Determination of release rate of biocides from antifouling paints Part 1: General method for extraction of biocides ISO 15181-2:2000 Paints and varnishes Determination of release rate of biocides from antifouling paints Part 2: Determination of copperion concentration in the extract and calculation of the release rate ISO 15184:1998 Paints and varnishes Determination of film hardness by pencil test ISO 15234:1999 Paints and varnishes Testing of formaldehyde-emitting coatings and melamine foams Determination of the steady-state concentration of formaldehyde in a small test chamber ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes Sampling ISO 15880:2000 Paints, varnishes and binders Determination of MEQ value of waterbased coating materials and binders Subject index Concordance list of ISO and ASTM standards
ISO 3219:1993 Plastics Polymers/resins in the liquid state or as emulsions or dispersions Determination of viscosity using a rotational viscometer with defined shear rate ISO 3262-1:1997 Extenders for paints Specifications and methods of test Part 1: Introduction and general test methods ISO 3262-2:1998 Extenders for paints Specifications and methods of test Part 2: Barytes (natural barium sulfate) ISO 3262-3:1998 Extenders for paints Specifications and methods of test Part 3: Blanc fixe ISO 3262-4:1998 Extenders for paints Specifications and methods of test Part 4: Whiting ISO 3262-5:1998 Extenders for paints Specifications and methods of test Part 5: Natural crystalline calcium carbonate ISO 3262-6:1998 Extenders for paints Specifications and methods of test Part 6: Precipitated calcium carbonate ISO 3262-7:1998 Extenders for paints Specifications and methods of test Part 7: Dolomite ISO 3262-8:1999 Extenders for paints Specifications and methods of test Part 8: Natural clay ISO 3262-9:1997 Extenders for paints Specifications and methods of test Part 9: Calcined clay ISO 3262-10:2000 Extenders for paints Specifications and methods of test Part 10: Natural talc/chlorite in lamellar form ISO 3262-11:2000 Extenders for paints Specifications and methods of test Part 11: Natural talc, in lamellar form, containing carbonates ISO 3262-12:2001 Extenders for paints Specifications and methods of test Part 12: Muscovite-type mica ISO 3262-13:1997 Extenders for paints Specifications and methods of test Part 13: Natural quartz (ground) ISO 3262-14:2000 Extenders for paints Specifications and methods of test Part 14: Cristobalite ISO 3262-15:2000 Extenders for paints Specifications and methods of test Part 15: Vitreous silica ISO 3262-16:2000 Extenders for paints Specifications and methods of test Part 16: Aluminium hydroxides ISO 3262-17:2000 Extenders for paints Specifications and methods of test Part 17: Precipitated calcium silicate ISO 3262-18:2000 Extenders for paints Specifications and methods of test Part 18: Precipitated sodium aluminium silicate ISO 3262-19:2000 Extenders for paints Specifications and methods of test Part 19: Precipitated silica ISO 3262-20:2000 Extenders for paints Specifications and methods of test Part 20: Fumed silica ISO 3262-21:2000 Extenders for paints Specifications and methods of test Part 21: Silica sand (unground natural quartz) ISO 3549:1995 Zinc dust pigments for paints Specifications and test methods Paints and varnishes, Ed. 3, Vol. 3 Page 4 of 5 ISO 3681:1996 Binders for paints and varnishes Determination of saponification value Titrimetric method ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments Specifications and methods of test ISO 4619:1998 Driers for paints and varnishes ISO 4620:1986 Cadmium pigments Specifications and methods of test ISO 4621:1986 Chrome oxide green pigments Specifications and methods of test ISO 4625:1980 Binders for paints and varnishes Determination of softening point Ringand- ball method ISO 4626:1980 Volatile organic liquids Determination of boiling range of organic solvents used as raw materials ISO 4629:1996 Binders for paints and varnishes Determination of hydroxyl value Titrimetric method ISO 4630:1997 Binders for paints and varnishes Estimation of colour of clear liquids by the Gardner colour scale ISO 6271:1997 Clear liquids Estimation of colour by the platinum-cobalt scale ISO 6744-1:1999 Binders for paints and varnishes Alkyd resins Part 1: General methods of test ISO 6744-2:1999 Binders for paints and varnishes Alkyd resins Part 2: Determination of phthalic anhydride content ISO 6744-3:1999 Binders for paints and varnishes Alkyd resins Part 3: Determination of unsaponifiable matter content ISO 6744-4:1999 Binders for paints and varnishes Alkyd resins Part 4: Determination of fatty acid content ISO 6745:1990 Zinc phosphate pigments for paints Specifications and methods of test ISO 7142:1984 Binders for paints and varnishes Epoxy resins General methods of test ISO 7143:2000 Paints, varnishes and binders Methods of test for characterizing water-based coating materials and binders ISO 7579:1990 Dyestuffs Determination of solubility in organic solvents Gravimetric method ISO 8618:1995 Plastics Liquid phenolic resins Conventional determination of non-volatile matter ISO 8623:1997 Tall-oil fatty acids for paints and varnishes Specifications and test methods ISO 8780-1:1990 Pigments and extenders Methods of dispersion for assessment of dispersion characteristics Part 1: Introduction ISO 8780-2:1990 Pigments and extenders Methods of dispersion for assessment of dispersion characteristics Part 2: Dispersion using an oscillatory shaking machine ISO 8780-3:1990 Pigments and extenders Methods of dispersion for assessment of dispersion characteristics Part 3: Dispersion using a high-speed impeller mill ISO 8780-4:1990 Pigments and extenders Methods of dispersion for assessment of dispersion characteristics Part 4: Dispersion using a bead mill ISO 8780-5:1990 Pigments and extenders Methods of dispersion for assessment of dispersion characteristics Part 5: Dispersion using an automatic muller
ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 4: Low-carbon cast-steel shot Paints and varnishes, Ed. 3, Vol. 4 Page 3 of 5 ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 1: Sampling ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 2: Determination of particle size distribution ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 4: Determination of apparent density ISO 11125-5:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 5: Determination of percentage defective particles and of microstructure ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 6 Determination of foreign matter ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 7: Determination of moisture ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 1: General introduction and classification ISO 11126-1:1993 /Cor. 1:1997 Technical Corrigendum 1:1997 to ISO 11126-1:1993 ISO 11126-1:1993 /Cor. 2:1997 Technical Corrigendum 2:1997 to ISO 11126-1:1993 ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 3: Copper refinery slag ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 4: Coal furnace slag ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 5: Nickel refinery slag ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 6: Iron furnace slag ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 7: Fused aluminium oxide ISO 11126-7:1995 /Cor. 1:1999 Technical Corrigendum 1:1999 to ISO 11126-7:1995 Paints and varnishes, Ed. 3, Vol. 4 Page 4 of 5 ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 8: Olivine sand ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 9: Staurolite ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products Specifications for non-metallic blastcleaning abrasives Part 10: Almandite garnet ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 1: Sampling ISO 11127-2:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 2: Determination of particle size distribution ISO 11127-3:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 3: Determination of apparent density ISO 11127-4:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 4: Assessment of hardness by a glass slide test ISO 11127-5:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 5: Determination of moisture ISO 11127-6:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 6: Determination of water-soluble contaminants by conductivity measurement ISO 11127-7:1993 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blastcleaning abrasives Part 7: Determination of water-soluble chlorides ISO 12944-1:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 1: General introduction
ISO 12944-2:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 2: Classification of environments ISO 12944-3:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 3: Design considerations ISO 12944-4:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 4: Types of surface and surface preparation ISO 12944-5:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems ISO 12944-6:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods ISO 12944-7:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 7: Execution and supervision of paint work