Professional Documents
Culture Documents
03/05/2011 8:19 AM
Hello my friends
Do you know any standard for inspection a pump ? ( when it is on service) that
explain what is important parameter of inspection a pump
Can you upload it ?
Thank you
lyn
Guru #1
__________________
Luck comes and goes. Skill is forever.
Register to Reply
Join Date: Oct
2008
Location: Mill
Creek
Posts: 8857
Good Answers:
jafary64
Member #3
In reply to #1
thank you
Register to Reply
Noudge79
Power-User #2
http://www.ashcroft.com/products/pressure_gauges/differential/Type
-1125-Differential-Gauge.cfm#
Join Date:
2) Check temperature of motor & bearing of casing- monitor it at
Feb 2011
regular basis. Increase of temperature means poorly lubricated or
shaft misalignment
Location:
Philippines http://trade.indiamart.com/details.mp?offer=2225796948
brich
Power-User #5
Join Date: Oct 2. the OEM hand book for installation and servicing
2009
3. check the RPM, intake & discharge pressure with the OEM
Location: UK pump curve
Posts: 314 and if the pump is still under the OEM warrantee, then ask
them for the EXACT specifications you need & if you are having
Good Answers: problems then get them to honour their contact commitment
to fix your problem (if you have one), if not covered by the
24
OEM then still ask for the details, pump curves etc.. so you can
compare you findings with that of the pump curve.
__________________
The square root of nothing is what you make it!
wangito
Guru #6
Posts: 821
Register to Reply
Good Answers: 7
praneethsuddapal
l #7
Browser
Re: Question About Inspection A
Pump
03/07/2011 6:32 AM
Join Date: Nov 2010
simply you go to a mechanic give him his fare and say
Posts: 6 your problem thats it there ends the matter