Professional Documents
Culture Documents
5m(16)
Inc.vat 7.99
Ex.vat 6.66
Code 320394
13
5m (16) 8m (26)
Vice-Versa Tape 5m
Inc.vat 7.10
Ex.vat 5.92
Code 952815
5m 8m
405
Measuring Tapes
Tape Tip
Made from ABS, it has a hook slot and two rare-earth magnets to secure it to your tapes tip. This clever device helps you measure diagonals with a greater degree of accuracy. The tape tip also allows a tape measure to be used as a marking gauge or as a compass. Tape Tip is destined to become a toolbox favourite
Metric Only 16mm x 3.5m Metric/Imp 16mm x 3.5m(11) Metric Only 19mm x 5m Metric/Imp 19mm x 5m(16)
Metric Tape 10m Metric Tape 20m Metric Tape 30m Metric/Imperial Tape 20m Metric/Imperial Tape 30m
Tape Tip
Inc.vat 3.20
Ex.vat 2.67
Code 210907
13
Metric/Imperial - 2m
Inc.vat 5.65
Ex.vat 4.71
Code 211077
Metric Tape 20m Metric Tape 30m Metric Tape 50m Metric/Imperial Tape 20m Metric/Imperial Tape 30m Metric/Imperial Tape 50m
This 13mm wide, 50m steel tape features an open sided case with a handle on the top and a point on the bottom for accurate location of the measurement. The winding handle folds away when not in use.
5m(16)
Inc.vat 7.10
Ex.vat 5.92
Code 210940
Inc.vat 37.10
Ex.vat 30.92
Code 950267
Inc.vat 24.25
Ex.vat 20.21
Code 950266
406
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Electronic Measuring
Metric Tape 30m Metric Tape 50m (gap after ring) Enamel Metric/Imperial 10m (for use with weight)
Electronic Measuring
ROLATAPE RTD412D Digital Measuring Wheel
This robust measuring wheel is perfect for roads as well as rough terrain. The wheel is fitted with a wide rubber tyre and the aluminium shaft is continuously variable in height making it very comfortable to use. The digital display is very clear to read with a maximum display value of 9999.99mm and automatic unit conversion: ft/in, m/cm and ft/100ths. There is a pause function to hold the current display, even when the wheel is spinning, for interrupted and combined measurements. The wheel circumference is 1,000mm and diameter 320mm, running off 2 x 1.5V batteries (AAA) that will give 30 hours of operating time.
Inc.vat 27.35
Ex.vat 22.79
Code 952973
Inc.vat 20.75
Ex.vat 17.29
Code 952972
MultiScanner Pro SL
Inc.vat 42.30
Ex.vat 35.25
Code 952974
Inc.vat 99.95
Ex.vat 83.29
Code 501692
13
PLR 25 Rangefinder
Inc.vat 78.95
Ex.vat 65.79
Code 212253
407
Rules
Metric/Imperial - 1m(36)
Inc.vat 13.50
Ex.vat 11.25
Code 800441
Machined from steel, with a knurled brass nut, the Rule Stop will fit onto virtually any standard steel rule between 8mm(5/16) and 32mm(1.1/4) wide. It clamps firmly and square to the rule by virtue of an internal dovetail face and fine machining. It turns the humble steel rule into a depth gauge, a transfer gauge and small square.
13
Rule Stop
Inc.vat 4.66
Ex.vat 3.88
Code 200047
Aluminium Rules
Available in two lengths, both of which are drilled at one end to enable them to be hung up out of harms way when not in use. These excellent combined rules/straight edges have one bevelled and calibrated edge and an anti-slip insert on the underside. These rules are compatable with the Axminster mount Cutter.
600mm 1,000mm
Veritas Ruler Stop Axminster Metric Stainless Rule BMI IdeeFIX Metric/Imperial
This innovative product provides a spirit level and telescopic rule in one. You can measure distance whilst ensuring you are level. Measuring internal dimensions of windows, doors and walls has never been easier, just pull out the telescopic rod, check for level on any of the three vials, vertical, horizontal & bulls eye, then read your measurement. Supplied with a tough carry bag as standard. Measurements can be made in either metric or imperial. Made in Germany. A metric-only pearl finish stainless steel rule which will appeal to the metric-converted engineer or woodworker. One edge has half millimetre graduations and the other, millimetre graduations. There is a handy conversion table on the back for those who still need reminding of what an inch looks like! The Veritas ruler stop increases the usefulness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc. To use, slide the stop over the ruler end and tighten it at the desired position. The notched post at the tip of the brass adjustment screw allows even the thinnest rulers to be clamped securely; it will not mar the ruler edge. Repositioning is fast and easy. The stops anodized aluminum body is contoured to fit comfortably between thumb and forefinger, with raised ridges for a better grip. Accommodates rulers from 22mm(7/8) to 32mm(1.1/8) wide and up to 1.25mm(0.05) thick, the typical dimensions of rulers in the 300mm(12) to 610mm(24) length range. At 25mm wide by about 57mm long (including the adjustment screw), this tool is as compact as it is useful.
Inc.vat 219.50
Ex.vat 182.92
Code 474187
150mm 300mm
Ruler Stop
Inc.vat 13.20
Ex.vat 11.00
Code 476679
408
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Rules
Black Coated Stainless Steel Rule with White Markings
The graduations on these rules are printed in white on a black background making them very clear and easy to read. One edge features imperial graduations in 1/32nds, 1/64ths and 1/16ths. The opposite edge has metric graduations in 0.5mm and millimetres. Made from stainless steel they will not rust, and the contrast between the black and white takes a lot of guess work out of marking out.
Scale Rule
Inc.vat 3.00
Ex.vat 2.50
Code 200110
Stainless Steel Rule 300mm Stainless Steel Rule 600mm Stainless Steel Rule 1.000mm
13
Dividing Rule
Inc.vat 30.65
Ex.vat 25.54
Code 610135
Rule Magnifier
Inc.vat 33.60
Golden Rules
Phi (or the golden ratio as it is also known) is a unique number that plays a prominent role in architectural and furniture composition and design, where it is used to proportion objects for aesthetic appeal. These Rules simplify Phi calculation and proportioning during design (and help identify the golden ratio in existing objects). They have a dual scale with normal graduations on the top edge and Phi-scale graduations on the bottom edge. Both faces are graduated; one face converts a known long measurement to an unknown short measurement, and the other face does the opposite. To scale a measurement, you simply find the identical measurement from the top scale on the lower scale.The hardened stainless-steel rules have a matt finish, ground edges and blackfilled etched markings. Excellent layout aids, they are available in 6 or 12 lengths.
12
Inc.vat 3.20
Ex.vat 2.67
Code 210902
12 24
Inc.vat 3.85
Ex.vat 3.21
Code 600865
409
Rules & Straight Edges Cutting Scales & Rules Straight Edges
300mm
Inc.vat 2.30
Ex.vat 1.92
Code 600398
450mm 750mm
A. 300mm(12) Steel Straight Edge At just over 500g and 6.3mm(1/4) thick, the 300mm straightedge is a handy size for checking things such as plane soles or water stones for flatness. It is also a good choice anywhere a larger straightedge would be unwieldy in use or would risk damaging the item being checked. B. 610mm(24) Steel Straight Edge An invaluable aid for machine set-up, the 610mm straightedge is a good size for setting up stationary machines such as planers and jointers. At slightly more than 1kg, it weighs enough to stay in place while you make adjustments. 6.3mm1/4 thick. C. 915mm(36) Steel Straight Edge Great for long-bed jointer and larger machine set-up, the 915mm straight edge is a good master shop reference. Weighing a substantial 2.6kg, it is 9.5mm(3/8) thick. The linished sides give a textured surface that makes the straight edge easier to grip with confidence.
600mm 1,000mm
13
300mm 400mm
AxminsterCutting Mats
A range of heavy duty cutting mats made of multi layer PVC 3mm thick which gives a protective surface when cutting almost any material. They not only protect the surface of a bench, kitchen table or desk from damage but make knife blades last that little bit longer. Great for use with cutting scales, mount cutters or, in fact, anywhere craft knives are used.
A1 Mat (594 x 841mm) A2 Mat (420 x 594mm) A3 Mat (297 x 420mm) A4 Mat (210 x 297mm)
600mm 900mm
410
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Squares
Axminster Engineers Squares
These general duty steel squares have hardened steel blades securely riveted onto a steel stock. Although intended primarily for engineering use they are also very popular with cabinet makers who have a need for a square which will hold its accuracy over a long period of time. Unlike conventional joiners squares they are accurate on both the inside and outside edges. Their realistic price and good level of accuracy make them exceptional value for money. Manufactured to BS939 grade 2.
38mm(1.1/2) 75mm(3)
200mm
Inc.vat 7.45
Ex.vat 6.21
Code 300856
Woodworkers Squares
Square Set
Inc.vat 25.00
Ex.vat 20.83
Code 700113
13
Pair of Squares
Inc.vat 23.35
Ex.vat 19.46
Code 210317
100mm(4) 150mm(6)
411
Squares
145mm
Inc.vat 22.40
Ex.vat 18.67
Code 110158
225mm
Inc.vat 42.10
Ex.vat 35.08
Code 501665
Imperial Metric
Combination Squares
Joseph Marples Carpenters Square
Part of the Joseph Marples range of traditionally made tools, the Trial 1 square has a rosewood stock, blued steel blade and double brass facings. The blade is fixed to the stock with steel rivets supported by diamond shaped brass roves. Uncompromising in both appearance and workmanship.
230mm
Inc.vat 22.96
Ex.vat 19.13
Code 900285
13
Trial 1 Set
Inc.vat 120.95
Ex.vat 100.79
Code 211806
Standard Large
412
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Multiscribe Professional
Initial design for the Multiscribe was a profile marking tool used to mark a line equidistant from a reference surface. At this particular task it is faster, more accurate and versatile than many similar products. There is a huge bonus, in that the Multiscribe also functions as a combination square and has many other uses, we counted at least 18 meaning it fully lives up to its name. Its ideally suited to the tradesperson and home enthusiast alike. It functions as: a parallel scribe, convex or concave scribe, compass, depth gauge, mortice gauge, plumb bob, vertical and horizontal level, 90 and 45 square, pencil sharpener and 250mm rule with 5mm graduations, to name but a few. Multiscribe is a high quality, well engineered and manufactured tool. Made in UK.
150mm(6)
Inc.vat 4.99
Ex.vat 4.16
Code 410381
Square Set
Inc.vat 34.50
Ex.vat 28.75
Code 900044
Inc.vat 6.95
Ex.vat 5.79
Code 300197
Carpenters Squares
Japanese Carpenters Squares
The exact equivalent of the western carpenters framing square and used for exactly the same purpose. In fact they have to be very accurate, because if the carpenters square is out then the whole building is going to be out. Unlike western framing squares these are light and flexible. The cross section of the arms shows a bevel on each edge allowing the square to be tilted when marking out, bringing the graduations closer to the workpiece, minimising errors caused by parallax. The arms are graduated in centimetres and millimetres. Interestingly the reverse of the long arm has a scale for determining the maximum size of a square beam obtainable from a round log, simply by placing the scale across the diameter and taking the measurement. Size 500mm x 250mm.
13
300mm(12)
Inc.vat 28.00
Ex.vat 23.33
Code 800442
500mm
A pocket sized combination square small enough to be carried around in a back pocket and large enough to do the majority of your everyday marking out jobs. Just think, how often do you actually use the full length of a standard 300mm(12) combination square? Not that often, we will wager. This is a very nice looking tool, the blade is pearl chrome for maximum clarity and the stock is cast iron with a blue crackle finish and ground edges and faces. Calibrations are both metric, centimeters and millimeters and imperial in eighths and sixteenths one edge and thirty-seconds and sixty-fourths (for the keen sighted) on the other. The centre finder is a useful feature, not that often used but handy for those who turn, whether in wood or metal. Other functions are try square, 45 mitre square, rule, depth gauge, marking gauge and level.
Inc.vat 35.70
Ex.vat 29.75
Code 384026
150mm(6)
Inc.vat 16.25
Ex.vat 13.54
Code 100190
300mm 400mm
413
Carpenters Squares
Inc.vat 5.99
Ex.vat 4.99
Code 810155
300mm
Inc.vat 22.15
Ex.vat 18.46
Code 300287
Inc.vat 22.99
Ex.vat 19.16
Code 110145
Roofmaster
Inc.vat 29.30
Ex.vat 24.42
Code 211805
13
Gauge Set
Inc.vat 4.45
Ex.vat 3.71
Code 100053
Pivot Square
Inc.vat 77.99
Ex.vat 64.99
Code 701978
Steel roofing square explained and simplified, there is no better pocket book for the roofer. Revised and combined in one volume and translated to the metric system.
Square Fence
Inc.vat 20.75
Ex.vat 17.29
Code 475961
Book - Pb 80 pages
5.96
Code
Inc.vat Short Leg 600mm, Long Leg 800mm 110.95 Short Leg 600mm, Long Leg 1200mm 119.50
414
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Mitre Saddle
Inc.vat 13.90
Ex.vat 11.58
Code 202386
155mm
Inc.vat 13.99
Ex.vat 11.66
Code 900048
250mm
Inc.vat 19.80
Ex.vat 16.50
Code 100885
Mitre Square
Inc.vat 11.86
Ex.vat 9.88
Code 510015
230mm
Inc.vat 20.15
Ex.vat 16.79
Code 510355
13
Marking Saddle
Inc.vat 22.36
Ex.vat 18.63
Code 202315
Imperial Metric
Marking Saddle
Inc.vat 18.80
Ex.vat 15.67
Code 202316
415
The Original True Angle tool is the worlds fastest and easiest angle making tool available. Just rotate the blades and read the dial. The hairline locates the exact angle within a tolerance of 5/1000ths of an inch. The blades rotate 360 in both directions. To lock the blades, lightly tighten the finger nut. To unlock the blades rotate the top blade anti-clockwise. The Original True Angle replaces every triangle, protractor, try square, bevel square, rafter square, framing square, combination square, or any other angle making template presently manufactured anywhere in the world. Made of special plastic the True Angle is virtually unbreakable.
Pocket Size 7 Folder Size 12 Desk Size 18 Workshop Size 23 4 Dial (fits all models)
Inc.vat 13.55
Ex.vat 11.29
Code 952816
13
Protractors
220mm
Inc.vat 7.00
Ex.vat 5.83
Code 300130
Multifix
Inc.vat 42.60
Ex.vat 35.50
Code 610116
Digital Angle Rule 200mm Digital Angle Rule 280mm Digital Angle Rule 480mm
Protractor
Inc.vat 33.25
Ex.vat 27.71
Code 900045
416
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Protractors
150mm
Inc.vat 4.80
Ex.vat 4.00
Code 800287
Angle Finder
Inc.vat 32.65
Ex.vat 27.21
Code 700304
13
GemRed Digital Angle Gauge BMI 715 Winklestar Multiple Angle Squares
Robust folding builders squares for variable transfer or taking angles of 0 to 270. Great for transferring bigger angles. The robust angle joint has 15 steps or infinite angles and is made of high quality tough plastic materials with a clearly marked degree scale. Made from ribbed easy grip anodized aluminium profile. With built-in vials, can also be used as a spirit level. Made in Germany. This is a small digital protractor providing accurate, easy-to-read results. Permanently calibrated, it will measure plus or minus 180 with a resolution of 0.1. Measuring just 55 x 60 x 32mm, it is small and light enough to carry around in your pocket. The flip-up LCD screen makes it convenient to read. Magnets in the base hold the gauge firmly in place on saw bench tables, planer beds and saw blades. A groove in the base allows you to use the gauge on pipes etc. The five minute auto shut-off feature ensures long battery life. This must-have tool enables you to set up or check circular saws, mitre saws and many other machines with complete accuracy. It requires two AAA batteries (not included).
Inc.vat Short Leg 600mm, Long Leg 800mm 110.95 Short Leg 600mm, Long Leg 1200mm 119.50
Inc.vat 28.99
Ex.vat 24.16
Code 952909
Inc.vat 154.96
Ex.vat 129.13
Code 950702
417
Marking Gauges
3-in-1 Gauge
Inc.vat 20.65
Ex.vat 17.21
Code 202397
Marker
Inc.vat 4.99
Ex.vat 4.16
Code 800415
Inc.vat 48.60
Ex.vat 40.50
Code 952906
Gauge
Inc.vat 6.90
Ex.vat 5.75
Code 510357
Inc.vat Standard Wheel Gauge Non-Graduated 27.30 Micro-Adjust Gauge Non-Graduated 34.50 Micro-Adjust Gauge Metric Graduations 37.30 Micro-Adjust Gauge Imperial Graduations 37.30 Replacement Wheel for Gauges 3.50
Marking Gauge
A precision brass and stainless steel marking gauge with quick adjusting sliding head and micro adjustable central sleeve for the finest adjustment. The long lasting tool steel blade is self storing within the head when not in use for safety and to prevent damage.
Gauge
Inc.vat 12.85
Ex.vat 10.71
Code 111022
Gauge
Inc.vat 23.86
Ex.vat 19.88
Code 200308
418
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Marking Gauges
Cutting Gauges
Cutting Gauge
Inc.vat 9.70
Ex.vat 8.08
Code 510360
Gauge Heads
Inc.vat 7.75
Ex.vat 6.46
Code 210949
Scribe-n-Trace
Inc.vat 25.30
Ex.vat 21.08
Code 702689
Cutting Gauge
Inc.vat 14.95
Ex.vat 12.46
Code 111024
13
Carpenters Gauge
Inc.vat 23.50
Ex.vat 19.58
Code 475905
Mortice Gauge
Inc.vat 21.35
Ex.vat 17.79
Code 400418
Transfer Scribe
Inc.vat 91.96
Ex.vat 76.63
Code 202391
Inc.vat 11.90
Ex.vat 9.92
Code 952240
Mortice Gauge
Inc.vat 37.00
Ex.vat 30.83
Code 510351
419
Mortice Gauges
Dovetail Markers
Dovetail Squares
Were not too sure how something inclined at an angle can be termed a square but our customers seem to be happy enough, and thats what really matters. These handy little squares have blued steel blades riveted to brass faced rosewood stocks and come in two versions, 1:6 for softwood and 1:8 for hardwoods. Apart from being very useful they are good to look at and worth buying just to have in the top drawer of the tool chest to admire from time to time.
Mortice Gauge
Inc.vat 37.36
Ex.vat 31.13
Code 111026
Pair of Markers
Inc.vat 12.20
Ex.vat 10.17
Code 610131
Specialist Gauges
Dovetail Marker
Inc.vat 30.40
Ex.vat 25.33
Code 100892
Marking Gauge
Inc.vat 45.30
Ex.vat 37.75
Code 900311
13
Gauge Heads
Inc.vat 12.95
Ex.vat 10.79
Code 610134
Trial 1 Set
Inc.vat 120.95
Ex.vat 100.79
Code 211806
Scratch/Joiners Awl
Inc.vat 7.99
Ex.vat 6.66
Code 800260
150mm 200mm
420
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Specialist Gauges
Axminster Digital Height Gauge 150mm(6)
3 4
The gauge comprises a precision machined alloy block, into which the linear scale of the Digital Readout (DRO) is bolted. This fixing is set very precisely at right angles to the base, to ensure accurate measurement. The linear scale is also marked with analogue scales from 0-6 and from 0-150mm. These scales are read against the lower edge of the Digital Read Out. There are three rare earth magnets set into the base of the block to ensure the gauge is held flat against a horizontal ferrous metal surface. The digital readout is mounted on the linear scale and has an L shaped pointer attached to it; there is also a small locking screw with a serrated knob; that will clamp the DRO. The L shaped pointer is ground to a fine edge to ensure the most accurate measurement; it is also hardened so that the points can be used for scribing lines at the set height.
Feeler Gauge
Inc.vat 4.25
Ex.vat 3.54
Code 950960
150mm(6)
Inc.vat 43.50
Ex.vat 36.25
Code 210041
150mm
Inc.vat 4.85
Ex.vat 4.04
Code 388024
13
Inc.vat 9.95
Ex.vat 8.29
Code 200088
260mm
Inc.vat 9.55
Ex.vat 7.96
Code 340197
Inc.vat 19.60
Ex.vat 16.33
Code 600886
0-15mm
Inc.vat 5.00
Ex.vat 4.17
Code 210970
Bore Gauge
Inc.vat 6.46
Ex.vat 5.38
Code 220103
421
Layout Tool
Inc.vat 11.40
Ex.vat 9.50
Code 950764
Trammels
Poly Gauge
Inc.vat 28.55
Ex.vat 23.79
Code 610132
Marking Knives
Trammel/Cutter Set
Inc.vat 12.50
Ex.vat 10.42
Code 100054
200mm
Inc.vat 12.70
Ex.vat 10.58
Code 900043
Point to Point
Inc.vat 17.99
Ex.vat 14.99
Code 800076
Compass Heads
Inc.vat 58.50
Ex.vat 48.75
Code 610137
Marking Knives
Inc.vat 32.86
Ex.vat 27.38
Code 202314
422
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Marking Pencils
Axminster Pack of 6 Carpenters Pencils c/w Sharpener Japanese Kiridashi Marking Knife
Kiridashi Kogatana marking knives are made by laminating a high carbon very hard steel (which will take an edge like no other steel) to a softer but tough steel backing. Available in four different widths - 9, 12, 15 and 18mm, the latter being the most commonly used whilst the smaller sizes are for more delicate marking. They can be used as they are or with a wooden handle and sheath construction. All the knives are bevelled for right hand use. Due to the extreme hardness of the steel they should only be used for marking and not for carving. Supplied in a plastic protective wallet. Length 170mm. A set of six professional carpenters pencils together with a specially designed sharpener which gives a clean sharp point. With its compact durable design, sharpening is much safer than using a knife.
Carpenters Pencils
Inc.vat 2.65
Ex.vat 2.21
Code 600901
Inc.vat 4.60
Ex.vat 3.83
Code 719837
Super Pencil
Inc.vat 5.56
Ex.vat 4.63
Code 701979
Inc.vat 2.95
Ex.vat 2.46
Code 340986
An extra hard pencil for marking on stone and other hard surfaces.
Inc.vat 4.30
Ex.vat 3.58
Code 719838
Knife
Inc.vat 15.70
Ex.vat 13.08
Code 384008
Multi-Pack
Inc.vat 10.20
Ex.vat 8.50
Code 300113
13
Pro-Sharp Sharpener
Inc.vat 8.30
Ex.vat 6.92
Code 100305
Knife - 170mm
Inc.vat 9.80
Ex.vat 8.17
Code 950029
Pencil Holder
Inc.vat 2.65
Ex.vat 2.21
Code 310405
Pencil Sharpener
Inc.vat 4.30
Ex.vat 3.58
Code 100214
423
Marking Pencils
150mm 200mm
Crayon Holder Yellow (6) Red (6) Black (6) Blue (6)
Curve Set
Inc.vat 3.30
Ex.vat 2.75
Code 100321
600mm
Inc.vat 3.80
Ex.vat 3.17
Code 100324
13
Flexible Curve
Inc.vat 41.35
Ex.vat 34.46
Code 950031
Internal 100mm Internal 150mm Internal 200mm External 100mm External 150mm External 200mm
424
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Measuring Calipers
Axminster Proportional Dividers
These particular dividers will scale up or down with a high degree of accuracy. You could use a ruler and a calculator to work it out, but proportional dividers will do it for you automatically. By adjusting the joint, you can set the tool to any transfer ratio from 1:1 to 1:10. The distance between points at one end is in the chosen ratio to the points at the opposite end. The dividers have other functions. They will divide the circumference into equal segments, from 6 to 15. Using the GS mark gives the ratio of 1:1.618 hence GS for Golden Section. The mark Square Root 2, gives the length of the hypotenuse of a right angle triangle with two equal sides, or 1:1.414. This is an invaluable tool for transferring scale. Use for drafting, technical drawing and chart making. It has passivated-chrome finish with stainless steel points. The overall length is 185mm.
150mm(6)
Inc.vat 19.99
Ex.vat 16.66
Code 910359
Proportional Dividers
Inc.vat 82.96
Ex.vat 69.13
Code 952881
100mm
Inc.vat 12.20
Ex.vat 10.17
Code 519001
All three sizes of these hardened stainless steel, general duty electronic calipers measure with a resolution of 0.01mm/0.0005in. Useful features include push button metric to imperial conversion, a zero setting button and a locking screw for transference of measurements or settings. A fine adjustment roller allows for quick and easy precise measurements with a clear LCD display of the result. The four measuring options are external, internal, depth and step.
150mm
Inc.vat 26.30
Ex.vat 21.92
Code 910360
13
Inc.vat 22.55
Ex.vat 18.79
Code 952910
Inc.vat 62.50
Ex.vat 52.08
Code 475009
Gauge Attachment
Inc.vat 12.90
Ex.vat 10.75
Code 210951
Digital Caliper
Inc.vat 24.55
Ex.vat 20.46
Code 200398
425
Scratch/Joiners Awl
This awl is used for careful marking or pricking when measuring out. It has a fine 125mm long, polished, tapered, pointed blade with a polished beech handle and brass ferrule. Diameter of blade is 4.8mm.
Scratch/Joiners Awl
Inc.vat 7.99
Ex.vat 6.66
Code 800260
Scriber
Inc.vat 1.07
Ex.vat 0.89
Inc.vat 7.40
Ex.vat 6.17
Code 810467
Workshop Scriber
Inc.vat 1.55
Ex.vat 1.29
Code 220087
Handy Scriber
A double ended scriber suitable for marking a wide variety of materials including wood, metal, plastic and laminates. One end has a knife edge, the other a fine point. Overall length is 177mm(7).
Inc.vat 30.55
Ex.vat 25.46
Code 100244
Handy Scriber
Inc.vat 1.55
Ex.vat 1.29
Code 610075
13
Scriber Block
Inc.vat 23.45
Ex.vat 19.54
Code 220091
Centre Punch
Inc.vat 41.90
Ex.vat 34.92
Code 475156
Inc.vat 2.60
Ex.vat 2.17
Code 953422
Pocket Scriber
Inc.vat 2.40
Ex.vat 2.00
Code 220090
Punch Set
Inc.vat 15.60
Ex.vat 13.00
Code 200313
426
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
-Surface Plates
Inc.vat 106.99
Ex.vat 89.16
Code 388016
Inc.vat 23.80
Ex.vat 19.83
Code 200238
Punch Set
Inc.vat 15.46
Ex.vat 12.88
Code 200048
Thead Gauges
Manufactured from close grained cast iron these angle plates are precision ground on the faces and ends to give accurate results when marking out or machining.
Inc.vat 88.50
Ex.vat 73.75
Code 810462
Dial Gauges
Axminster Dial Gauge
A high precision 50mm diameter dial gauge with a 10mm travel, one millimetre per revolution sub divided into tenths and hundredths giving a resolution of 0.01mm per division. There are two movable setting tabs on the dial and a bezel which can be rotated for zero setting. Mounting is either by the 8mm diameter stem or by using the lug on the rear with its 1/4 diameter hole.
Gauge
Inc.vat 3.30
Ex.vat 2.75
Code 900472
13
Zeus reference tables are the constant companion of most engineers and can be a source of critical information for all practical people. Metric / imperial conversion tables, information of all kinds and much more.
Dial Gauge
Inc.vat 17.90
Ex.vat 14.92
Code 310453
Book - Pb 24 pages
Code 662422
Inc.vat 21.85
Ex.vat 18.21
Code 220100
Surface Plates
Small Granite Surface Plate
This handy flat surface has many uses. Made entirely of granite it will always remain flat, neither changes in ambient temperature nor humidity will affect its accuracy. Size 305 x 230 x 50mm, with a flatness of 0.002mm.
Inc.vat 30.50
Ex.vat 25.42
Code 100191
Inc.vat 64.96
Ex.vat 54.13
Code 610121
Inc.vat 26.15
Ex.vat 21.79
Code 400208
427
Case
Inc.vat 26.15
Ex.vat 21.79
Code 475633
Vertical 100mm(4) Vertical 150mm(6) Horizontal 150mm(6) Vertical 200mm(8) Horizontal 200mm(8) Horizontal 300mm(12)
BMI Inclinometer
Although primarily designed for roof beam layout work, this inclinometer will find other, more general uses as well. The dial is marked in four quadrants of 90 and the vertical indicator is coloured red with a centre line in white for good visibility. A red marker can be positioned anywhere around the dial to give a quick reference to the setting angle required. On the rear is a very useful roofing ready reckoner. The dial is 80mm diameter and the base is 105 x 25 mm.
Inclinometer
Inc.vat 10.10
Ex.vat 8.42
Code 476324
13
Magnetic Base
Inc.vat 10.99
Ex.vat 9.16
Code 600401
Precision Measuring
Remote Reader
Inc.vat 59.95
Ex.vat 49.96
Code 210068
Plumb Bobs
Veritas Flat Bob
This is a plumb bob that wont drive you mad. All the annoying aspects of traditional plumb bobs have been designed out. The flat sides prevent rolling and allow the bob to settle very quickly. The 8 of nylon cord is held on a windlass which clips neatly into the pencil slot when not in use. A protective cap prevents the point from damage when not in use. Its a just gotta have type of tool as well as being extremely useful. Length 90mm. See Marking Pencils section for pencils to go with your plumb bob.
Digital Micrometer
A digital micrometer with a decently large scale which is easy to read. With a range of 0-25mm in four stages, and with an accuracy resolution of 0.001mm. Can display either Imperial or Metric readings. Supplied in storage case.
Micrometer
Inc.vat 61.00
Ex.vat 50.83
Code 600885
Flat Bob
Inc.vat 17.56
Ex.vat 14.63
Code 510449
Inc.vat 28.99
Ex.vat 24.16
Code 952909
428
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Levels
Line Level
An 80mm long level, light in weight to eliminate line sag, equipped with line hooks at each end, a flat base with longitudinal vee groove and a pocket clip. Cheap and cheerful but very useful.
Line Level
Inc.vat 1.70
Ex.vat 1.42
Code 310157
300mm(12)
Inc.vat 4.40
Ex.vat 3.67
Code 410177
DNM 60 L Level
Inc.vat 112.96
Ex.vat 94.13
Code 950876
250mm(10)
Inc.vat 28.50
Ex.vat 23.75
Code 900235
Bullseye Level
A bullseye level for levelling a surface in all directions at the same time. Can be glued to the surface if required. 35mm diameter.
250mm
Inc.vat 53.50
Ex.vat 44.58
Code 492025
Bullseye Level
Inc.vat 3.40
Ex.vat 2.83
Code 300247
13
Surface Level
Inc.vat 4.00
Ex.vat 3.33
Code 502257
Multi Level
Inc.vat 14.99
Ex.vat 12.49
Code 502245
429
Levels
2 vial - 300mm 2 vial - 400mm 2 vial - 500mm 2 vial - 600mm 2 vial - 800mm 2 vial - 900mm 2 vial - 1,000mm 2 vial - 1,200mm 2 vial - 1,800mm 2 vial - 2,000mm 3 vial - 400mm 3 vial - 600mm 3 vial - 800mm 3 vial - 1,000mm 3 vial - 1,200mm
Inc.vat 15.40 16.75 17.95 19.20 21.80 22.99 23.99 26.70 37.90 42.95 21.80 24.30 26.99 32.26 34.85
Ex.vat 12.83 13.96 14.96 16.00 18.17 19.16 19.99 22.25 31.58 35.79 18.17 20.25 22.49 26.88 29.04
Code 475973 475878 475768 475639 475495 475421 475379 475289 474765 474710 475494 475374 475271 475125 475053
1,200mm
Inc.vat 150.50
Ex.vat 125.42
Code 402120
Digital Level
Inc.vat 24.55
Ex.vat 20.46
Code 952911
430
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
600mm
Inc.vat 49.36
Ex.vat 41.13
Code 211592
Inc.vat 124.96
Ex.vat 104.13
Code 952292
Inc.vat 44.95
Ex.vat 37.46
Code 501694
13
Inc.vat 148.96
Ex.vat 124.13
Code 212207
Inc.vat 189.95
Ex.vat 158.29
Code 950806
431
BS150 Tripod
Inc.vat 42.95
Ex.vat 35.79
Code 211279
13
Bosch GLL 2-80 P Dual 360 Degree Line Laser with BS 150 Tripod
A horizontal and vertical laser level, showing 2 x 360 laser lines or a single line around a room, enabling many simultaneous markings, alignment and levelling applications. Precise and accurate suitable for carpenters, builders, electricians and plumbers as well as many other trades on site or in the home for indoor use. Simple to use and set up, with a working diameter of up to 40m (80m when using a receiver, optional extra), it self-levels within 4 seconds with a accuracy of 0.2mm/m. Compact in size it is supplied with a robust BS 150 tripod that is height adjustable with a working height of 520 - 1,470mm. Running on 4 x AA batteries with an 18 hour battery life, IP54 splash and dust protection, and class 2 laser. Supplied with tripod, protective pouch and batteries.
Inc.vat GLL 3-80 P Multi Line Laser & BS 150 Tripod 418.00
Ex.vat 348.33
Code 952734
Inc.vat 329.95
Ex.vat 274.96
Code 950807
Inc.vat 189.95
Ex.vat 158.29
Code 950808
432
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 39.95
Ex.vat 33.29
Code 950874
BT 160 Tripod
Inc.vat 51.95
Ex.vat 43.29
Code 950875
13
Bosch GRL 400 H Rotation Laser with Receiver, Rod and Tripod
Built for the construction site. With a range of up to 400m, this laser kit has everything you need to lay out jobs like footing and foundations. Easy to understand with a single button operation and high precision of 0.08mm/m, it is self-levelling and rotates at a speed of 600rpm. Automatic shock warning prevents levelling errors. The laser head is protected by a metal cage resisting drops of up to 1m. Works with rechargeable batteries (30 hours), alkaline (50 hours) or 240V mains. IP65 dust and water protection, and class 2 laser. Supplied with BT170 building tripod which is fully adjustable, LR1 laser receiver, GR240 cut and fill rod up to 2.4m in two sections, rechargeable NiMh battery, 2 x 1.2V and 2 x 1.5V batteries, red laser target and viewing glasses. The unit is fitted with a 5/8 tripod thread and has an overall size of 190 x 180 x 170mm.
Waterproof
Inc.vat 589.96
Ex.vat 491.63
Code 501748
IPX7 Laser
Inc.vat 999.95
Ex.vat 833.29
Code 478206
433