Professional Documents
Culture Documents
Quantum Dot Laser
Quantum Dot Laser
Quantum-dot laser tightly confines the electrons and holes to produce steady output, regardless of external temperature. I will discuss quantum structures, laser and lasing action and use of quantum dots in lasers.
How QDs Work Properties of Quantum Dots Working Principle Types of Lasers Historical Evolution Fabrication Application Requirement Bottlenecks Advantages
LASER
QD Laser
Applications References
In nanotechnology, a particle is defined as a small object that behaves as a whole unit in terms of its transport and properties. According to size:
fine particles cover a range between 100 and 2500 nm ultrafine particles are sized between 1 and 100 nm
Non-traditional semiconductor
Crystals composed of periodic groups of II-VI, III-V, or IV-VI materials Range from 2-10 nanometres (10-50 atoms) in diameter
An electromagnetic radiation emitter with an easily tunable band gap 0 degrees of freedom
Emission frequency depends on the bandgap, therefore it is possible to control the output wavelength of a dot with extreme precision Small nanocrystals absorb shorter wavelengths or bluer light Larger nanocrystals absorb longer wavelengths or redder light The shape of the dot also changes the band gap energy level
Quantum confinement
The size of the band gap is controlled simply by adjusting the size of the dot
bulk semiconductors display a uniform absorption spectrum, whereas absorption spectrum for quantum dots appears as a series of overlapping peaks that get larger at shorter wavelengths the wavelength of the exciton peaks is a function of the composition and size of the quantum dot. Smaller quantum dots result in a first exciton peak at shorter wavelengths
Quantum Yield
The percentage of absorbed photons that result in an emitted photon is called Quantum Yield (QY) controlled by the existence of nonradiative transition of electrons and holes between energy levels greatly influenced by the surface chemistry
it should be of a different semiconductor material with a wider bandgap than the Core
reduces nonradiative recombination and results in brighter emission also neutralizes the effects of many types of surface defects
Lasing Process
Solid-state lasers have lasing material distributed in a solid matrix (such as the ruby or neodymium:yttrium-aluminum garnet "Yag" lasers). The neodymium-Yag laser emits infrared light at 1,064 nanometers (nm). Gas lasers (helium and helium-neon, HeNe, are the most common gas lasers) have a primary output of visible red light. CO2 lasers emit energy in the far-infrared, and are used for cutting hard materials. Excimer lasers (the name is derived from the terms excited and dimers) use reactive gases, such as chlorine and fluorine, mixed with inert gases such as argon, krypton or xenon. When electrically stimulated, a pseudo molecule (dimer) is produced. When lased, the dimer produces light in the ultraviolet range.
Dye lasers use complex organic dyes, such as rhodamine 6G, in liquid solution or suspension as lasing media. They are tunable over a broad range of wavelengths. Semiconductor lasers, sometimes called diode lasers, are not solid-state lasers. These electronic devices are generally very small and use low power. They may be built into larger arrays, such as the writing source in some laser printers or CD players. Quantum Dot lasers use quantum dots as materials to produce lasing action. These are low power consuming, tunable and have better temperature stability.
Monolayer fluctuations
Schematic representation of different approaches to fabrication of nanostructures: (a) microcrystallites in glass, (b) artificial patterning of thin film structures, (c) self-organized growth of nanostructures
A quantum dot laser is a semiconductor laser that uses quantum dots as the active laser medium in its light emitting region.
Due to the tight confinement of charge carriers in quantum dots, they exhibit an electronic structure similar to atoms.
An ideal QDL consists of a 3D-array of dots with equal size and shape Surrounded by a higher band-gap material
confines the injected carriers. Consists lower and upper cladding layers (n-doped and p-doped shields)
Size, shape and alloy composition of QDs close to identical Real concentration of energy states obtained Macroscopic physical parameter light output
Nanostructures made by high-energy beam patterning cannot be used since damage is incurred
Electric field applied can change physical properties of QDs Carriers can be injected to create light emission
Electrical control
Maximum material gain and differential gain Low threshold at room temperature High output power Large modulation bandwidth
Telecom network
QD Lasers
Datacom network
Optics
In telecommunications they send signals for thousands of kilometers along optical fibers. In consumer electronics, semiconductor lasers are used to read the data on compact disks and CD-ROMs. For detection of gases and vapors in a smokestack. For fiber data communication in the speed range of 100Mbps to 10Gbps. Medical lasers are used because of their ability to produce thermal, physical, mechanical and welding effects when exposed to tissues. Lasers are also used by law enforcement agencies to determine the speed and distance of the vehicles. Lasers are used for guidance purposes in missiles, aircrafts and satellites.