Professional Documents
Culture Documents
10. Step 10 open a sketch on the body and draw a line. make parallel the line with the shown edge
11. Step 11 mirror the line and add this two circle
15. Step 15 draw two circles more and cut the body again. use ofset feature
1. Step 1 open sketch on the front plane and draw shown sketch
1. Step 1 open a sketch on the right plane and draw a sketch like shown
2. Step 2 open a sketch on the body. draw a 30mm radiused circle and extrude it 20mm
6. Step 6 use cut extrude command and tick 'filp side to cut'
7. Step 7 now use mirror command. your crank began to take shape
14. Step 14 use combine command. your crank is ready for now. we will add oil canal and other parts after
9. Step 9 now we will change z coordinate. enter the shown value (95mm)
Aykut Dana 26 days ago using ' move/copy body' command for rotating 1. Step 1 click on the move copy body command
3. Step 3 click on rotate option and make sure that copy box have to be unticked
1. Step 1 open a sketch on the top plane and draw shown sketch
3. Step 3 open a sketch on top planen again and draw an axis for revolve command
2. Step 2 use 3D sketch and draw a line. starting point and endpoint have to be center of the circles
6. Step 6 add a plane ( referance geometry>plane then select line and endpoint)
11. Step 11 now open a sketch on the green surface, draw a circle and use cut extrude command
12. Step 12 open a sketch on the right plane and draw shown sketch. then use cut extrude command and cut the body
13. Step 13 roll forward the feature tree and open a sketch on the right plane
14. Step 14 draw shown sketch then use cut extrude command
1. Step 1 we will model a piston. try to draw a sketch like in the picture. most importand dimension is piston radius.
12. Step 12 open a sketch on blue surface and draw a 11mm circle center of it
4. Step 4 open a sketch on the front plane and draw shown sketch
1. Step 1 open a sketch on the front plane and draw two circles
5. Step 5 now open connecting rod part 2 and draw shown sketch
1. Step 1 open a sketch on right plane and draw a axis for new plane
2. Step 2 create a plane that have to be 35 degree between new plane and right plane. then open a sketch and draw 4 circles
7. Step 7 open a sketc under the body and draw two circles. smaller circles radius is 50mm. other one have to be bigger then body. then use cut extrude command and enter volues
8. Step 8 open a sketch on cutted surface and draw circles like this
11. Step 11 use linear pattern command. you must to decide that how many cylinder you want. I prefered to make 12 cylinder.
12. Step 12 now we will cut the surplus portions. please check the photo and try to draw a sketch on the body like this. you should use linear pattern command
13. Step 13 use the command and cut the body 70mm. That's all for now. please follow the tutorial step by step. if you have a problem with the tutorials please let me know
11. Step 11 draw a circle again. it should be concentric with the circle that we created just now
15. Step 15 finally trim these lines and confirm the command
17. Step 17 now we will use mirror command. use sketch--mirror commad. then select shown sections
20. Step 20 confirm that. now we will use trim command again
22. Step 22 confirm that. then draw a centerline again. it will uses for mirror
24. Step 24 click on shown box, select the mirror axis and confirm that
25. Step 25 use trim command and make your sketch like shown
27. Step 27 enter shown radius parameter by 15mm, then only click on shown points
28. Step 28 confirm that and your sketch should be like this
31. Step 31 now we will extrude this sketch. open extrude command
17. Step 17 now we will use this circle option. please click on it
19. Step 19 secondly clik on this circle and complate your perimeter circle. If you can not, please try again. you will see it is not too hard
30. Step 30 use mirror command again. select the shown lines
32. Step 32 now use convert entities command and select the shown edges
33. Step 33 select the other hole edges and confirm that. sketch finished.
1. Step 1 open a sketch on front plane and draw water canal profile
2. Step 2 extrude it
3. Step 3 create a plane bottom of body and use mirror command for to mirror water canal
5. Step 5 draw a sketch like this and use cut extrude command
6. Step 6 go to left side, open a sketch and draw a sketch like this
7. Step 7 extrude it. please attention that to make direction 'up to surface'. select the outer surface of the cylinder
8. Step 8 open a sketch on same surface and draw semi-circular profile. it have to be closed profile
9. Step 9 create the plane 3 ( it is at the center of water canal) then draw the path.( we will use sweep command)
13. Step 13 mirror all things and your water cooled 12 cylinders are ready
1. Step 1 open a sketch under the body and draw this sketch.( you can use convert entities command for circles)
5. Step 5 extrude the profile at each directions. after, use body-move-copy comman to translate body 15 mm on Z coordinate.
6. Step 6 open a sketch under the body and draw this sketch
8. Step 8 open a sketch on the right plane. use convert entities command.
9. Step 9 extrude the last sketch in two directions. direction 1 is up to body and direction 2up to purple surface
12. Step 12 use linear pattern command (95 mm gab) then extrude the sketch up to pink surface
15. Step 15 open a sketch front side and draw a 30mm radiused circle. then use cut extrude command
16. Step 16 open a sketch on the cylinders. draw circles like this 17. Step 17 use cut extrude command. enter volues
1. Step 1 open a sketch on the front of the body and draw a circle
4. Step 4 open a sketch under the body and draw circles like this
6. Step 6 open a sketch same surface again. draw circles like this. we will use cut revolve command, so don' forget the axis
7. Step 7 use cut revolve command. select the circles and axis
2. Step 2 extrude the sketch 35 mm. then draw this two circles and cut the body
4. Step 4 this part is ready to use. now we will make another connector
5. Step 5 draw a 30mm radiused circle like this and use cut extrude command
9. Step 9 use mirror command and extrude the sketch up to green surface
3. Step 3 use extrude command. click on 'from surfacde-face-plane' option and select he green surface. then click on direction 1 'up to surface' and select the pink surface
4. Step 4 please examine the shown sketch. draw the same. then exit from sketch
5. Step 5 click on the sketch from feature tree and click on show button
12. Step 12 extrude the sketch 4mm. make untick 'merge result' option
7. Step 7 open a sketc on blue surface and draw a circle like this
3. Step 3 click on insert new compaoent button and find your crankshaft
8. Step 8 click on shown surface and select distance option. enter 2,5mm volues
3. Step 3 select right plane of the piston and click on matte command
9. Step 9 click on ok
10. Step 10 add 11 more piston and connecting rod . unfortunately you have to make same things for all
1. Step 1 open connecting rod. use insert-part command and insert the connecting rod part 2
1. Step 1 open the piston. use insert-part command and choose the pin
2. Step 2 click on shown surfaces for to add matte. make them concentric
1. Step 1 open your saved assembly. we changed piston and connecting rod. if solidwork ask you for rebuil, please confirm that. now insert this part
8. Step 8 finally make this surfaces conctric. now add 5 more new part and make same things for them
4. Step 4 finally do it for this surfaces. click on ok. we finished the V12. of course I will generate new tutorials for new parts. please follow
https://d2t1xqejof9utc.cloudfront.net/pictures/files/5961/large.JPG?1330028346[21/05/2012 18:30:21]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/5965/large.JPG?1330028351[21/05/2012 19:04:16]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/5966/large.JPG?1330028352[21/05/2012 19:09:23]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/5967/large.JPG?1330028354[21/05/2012 20:09:25]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6380/large.JPG?1330113499[21/05/2012 20:10:54]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6388/large.JPG?1330113509[21/05/2012 20:30:31]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6389/large.JPG?1330113510[21/05/2012 20:30:42]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6391/large.JPG?1330115707[21/05/2012 20:36:01]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6400/large.JPG?1330115718[22/05/2012 2:22:11]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6401/large.JPG?1330115719[22/05/2012 2:22:21]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6404/large.JPG?1330115723[22/05/2012 11:17:35]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6405/large.JPG?1330115724[22/05/2012 11:19:33]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6407/large.JPG?1330116219[22/05/2012 11:30:42]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6408/large.JPG?1330116220[22/05/2012 11:35:25]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6410/large.JPG?1330116222[22/05/2012 11:38:17]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6415/large.JPG?1330119536[22/05/2012 12:11:13]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6416/large.JPG?1330119537[22/05/2012 12:11:21]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6418/large.JPG?1330119539[22/05/2012 12:14:17]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6422/large.JPG?1330120124[22/05/2012 12:32:25]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6423/large.JPG?1330120125[22/05/2012 12:34:23]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6426/large.JPG?1330120129[22/05/2012 12:47:38]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6427/large.JPG?1330120130[22/05/2012 13:09:50]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6429/large.JPG?1330120133[22/05/2012 13:15:37]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12282/large.JPG?1336351424[22/05/2012 13:38:51]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12223/large.JPG?1336327605[22/05/2012 14:00:24]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6432/large.JPG?1330120136[22/05/2012 14:44:40]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6433/large.JPG?1330120137[22/05/2012 17:44:06]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12266/large.JPG?1336351105[22/05/2012 17:59:55]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12267/large.jpg?1336351106[22/05/2012 18:00:01]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12268/large.JPG?1336351107[22/05/2012 18:00:10]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/12269/large.JPG?1336351108[22/05/2012 18:00:24]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6434/large.JPG?1330120902[22/05/2012 18:01:38]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6435/large.JPG?1330120905[22/05/2012 18:01:44]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6436/large.JPG?1330120907[22/05/2012 18:01:57]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6437/large.JPG?1330120908[22/05/2012 18:03:17]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6438/large.JPG?1330120910[22/05/2012 18:03:24]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6439/large.JPG?1330120912[22/05/2012 18:04:31]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6440/large.JPG?1330120913[22/05/2012 19:14:10]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6441/large.JPG?1330120915[22/05/2012 19:14:18]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6444/large.JPG?1330120920[22/05/2012 22:00:18]
https://d2t1xqejof9utc.cloudfront.net/pictures/files/6445/large.JPG?1330120922[23/05/2012 20:40:13]