Professional Documents
Culture Documents
Q&A Proe
Q&A Proe
None
Which one is dimensional pattern iv) a. Reference b. General c. Rotational d. Bi-Direction e. None
Which one of the following is used to find parent/child relationships vi) a. Reroute b. Redefine c. Reorder d. Global ref. viewer e. None
Which one of the following is standard hole type vii) a. ANSI b. UNC c. ASME d. ACME e. None
Which one of the following is system parameter in detailing viii) a. Title b. Drawing name c. Cost d. Weight e. None
Which option is the best suited to take a backup of an assembly ix) 2) a. Save b. Save As c. Write d. Backup e. None
3)
4)
What is the option used to blend two section with non-equal entities i) a. Curve b.Blend Vertex c. Point d. Edge e. None
5)
The display mode for each view in drawing mode is set using the following option i) a. Show / Erase b. Visibility c. Disp mode d. layer status e.none
6)
The relation parameter used in variable section sweep is i) a. Sin ( ) b. Log ( ) c. Evalgraph d. Trajpar e. None
7)
To calculate the mass property one reference is needed i) a. Plane b. Co-sys c. Axis d. Curve e. None
8)
The setup file in drawing mode is i) a. Config b. Train c. Trail d. Dtl e. None
9)
Pro/Toolkit is the module which deals with i) a. Modeling b. Pro/program c. Die face d. Programming using C e. None
10) Which one of the following is the cosmetic feature i) 69. . ii) a. Tweak b. Draft c. Groove d. Rib e.none
The table origin can be set by using the option in drawing mode a. Co-sys b. Set rotation origin c. Vertex d. Point e.None
11) The following parameter is used in Pro/ Mechanica i) a. Poissons ratio b. Emissivity c. Enthalpy d. Shear modulus e. None
12) The following option in round is used to finish smoothly i) a. Round extent b. Auto blend c. Transition d. None
13) The parametric assembly design in Pro/E is i) a. Top down b. Package c. Envelope d. Zone e. None
14) The repeat region is used to generate i) a. Hole table b. Title block c. BOM d. Process chart e. None
15) The FEA module in Pro/E is i) a. Pro/Dieface b. ANSYS c. Pro/Mechanica d. COSMOS e. ADAMS
16) For rotational pattern the feature must have a strong reference like i) a. Axis b. Plane c. Co-sys d. Edge e. None
17) The following cannot be shown using show / erase i) a. Axis b. Ref.dimension c. Drawing symbol d. Surface finish e. None
18) To generate CAM profile which option is used i) a. Variable section sweep b. Blend c. Cut d. Helical sweep
19) In wildfire to edit format in drawing mode i) a. File>Page Setup b. Format>Replace c. Edit>Properties d. None
20) Which is the parameter automatically created for a new part i) a. Drawn By b. Checked By c. Description d. Scale e. None
23) Which is the bottom level where a relation can be added i) a. Sketcher b. Part c. Assembly d. Drawing e. None
24) In surface merging the following is used i) a. Trim b. Intersect c. Extend d. None
Select the file name which is used in setting up of environment in Pro/E ii) a. Config b. Train c. Trail d. Dtl e. None
iii)
a. Mapkey
b. Config
c. Dtl
d. exp
e. None
25) Which plane will be created while creating a feature. i) a. Front b. Top c. Fly d. Right e. None
In drawing mode, created dimension can be removed by ii) a. Show / Erase b. Delete c. Dim d. None
27) The following parameter cannot be used in relation in drawing mode i) a. Part parameter b. Drg. parameter d. Feature parameter c. Assy parameter e. None
28) Which one of the following is trim option i) a Vertex b. Corner c. Break d. Point e. None
29) The skeleton model is created in i) a. Part mode b. Drawing mode c. Assembly mode d. Format e. None
30) The model should be on the basis of i) a. Feature number b. Mfg.process c. Feature id d. None
32) The forming operation in a sheet metal models can be performed using i) a. Form b. Bend c. Sheet>Create d. None
Store Back relates to the following file management option in Pro/E ii) a. Erase b. Delete c. None d. Save e. Save As
Which text should not be edited in the title block of the drawing iii) a. Size b. Scale c. Name & Date d. Title e. None
Which one of the following is assembly constraint iv) a. Coincide b.. Attach c. Align d. Detach e. None
34) Non-uniform pattern is created using the option i) a. Identical b. General c. Table d. Ref e. None
The following option is used in Pro/Program to get values from a file ii) a Get file b. File c. Read file d. Input file e None