Professional Documents
Culture Documents
1 3
1 3
BQ
REV 01-DEC-06
Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Wedges Tools Technical Data
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Diamond Products
Impregnated Bits Thermally Stable Diamond Bits (TSD) Reaming Shells Casing Shoes Casing Bits Bit and Shell Gauges Diamond Wedging Tools Options and Specialty Diamond Products
NOTE: Surface Set Bits are available on request.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Impregnated Bits
BQ Impregnated Bits Boart Longyear introduces metal coated diamond impregnated bits the latest in industrial diamond technology. Significantly outperforms the successful Series range in both drilling speed and bit life. Protects the diamond from oxidation and surface degradation during manufacturing. Inhibits the premature "pull-out" of the diamond. Increases the number of cutting edges exposed to the rock. Available in multiple standard configurations and selected on the basis of relative rock hardness and ground conditions. Standard Geometry * 4050115 4050129 4050130 4050142 4051492 4052174 4051014 4051616 4050310 4050328 4051329 * 4052181 4050125 * Reaming Shell Geometry * 4050069 4050070 4050073 4050075 4050076 4050358 * * 4050078 4050750 4050080 4050113 * 4050082 4052711
Alpha01 Alpha01 Alpha02 Alpha04 Alpha06 Alpha06 Alpha07 Alpha07 Alpha07 Alpha08 Alpha08 Alpha08 Alpha09 Alpha09 Alpha10 Alpha10
Abrasive
BQTK Impregnated Bits Standard Geometry * * * * 4052331 4052509 4051956 4051963 4051552 4050420 4051254 4052510 4051688 4052511 4051564 * Reaming Shell Geometry * * * * * * * * * * * 4052710 * * * *
Standard: Designed to handle a wide variety of formations. Abrasive: Recommended for broken "abrasive" drilling condtions. For harder rock with broken conditions use a higher number bit to maintain good drilling speeds. Competent: Free cutting design for fast penetration in very hard "competent" rock or for use on lower powered rigs and geotechnical applications. Express Geometry: Bits are supplied with additional intermediate waterways which provide increased flushing. The reduced bit face area allows for higher penetration rates with less bit weight required. Recommended when polishing occurs with standard geometry.
Alpha01 Alpha01 Alpha02 Alpha04 Alpha06 Alpha06 Alpha07 Alpha07 Alpha07 Alpha08 Alpha08 Alpha08 Alpha09 Alpha09 Alpha10 Alpha10 *
Abrasive
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual or the Diamond Products Field Manual for additional operating information.
NOTE: "Standard Gauge" bits are defined as having a set outside diameter which is 0.38mm (0.015") smaller than "Reaming Shell Gauge". For more detailed information on "Standard Gauge vs Reaming Shell Gauge" impregnated bits, refer to the ITHT Product Manual.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Reaming Shells
The recommended practice is to alternate two reaming shells in each hole drilled to maintain hole diameter. Upon bit changes, the reaming shell should be checked for wear with the bit and shell wear gauge. Failure to observe these recommended practices will result in either a poorly stabilized bit or an undersized hole that will require costly reaming. Reaming Shells - Sourced from Americas BQ Standard BQ Stabilized BQTK Standard BQTK Stabilized Reaming Shells - Sourced from Australasia BQ Heavy Duty Impregnated BQ Adaptor Coupling Impregnated BQ Surface Set BQ Adaptor Coupling Surface Set Reaming Shells - Sourced from Europe BQ Impregnated BQ Surface Set BQ Premium Stabilized BQTK Impregnated BQTK Surface Set BQTK Premium Stabilized Reaming Shells - Sourced from South Africa BQ Premium BQ Ringset BQ Shear Thread ** Available on special request. NOTE: Refer to the ITHT Product Manual or the Diamond Products Field Manual for additional operating information. DP 28220706 DP 28220700 DP 28220703 49447 48794 ** 49452 48799 ** 4101172 4101173 4101852 4101853 3522859 3522865 3522858 3522864
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Casing Shoes
Casing Shoe The inside diameter of the casing shoe is not set with diamonds and is flush with the inside diameter of the casing, permitting free passage of the core barrel past the casing shoe. Applications: The casing shoe is threaded to the end of the casing string for penetration through overburden. Assists in seating the casing into the bedrock, providing a tight seal for the drilling fluids to flow through to the surface. Used to ream the casing downward when advancing a casing string in an existing hole with the rod string still in place. Casing Shoes - Sourced from Americas/South Africa BW V-Ring BW Econo 2*, Series 2 Casing Shoes - Sourced from Australasia BW Standard Impregnated BW Surface Set BW Impregnated Casing Advancer Shoe Casing Shoes - Sourced from Europe BW V-Ring BW Oversize * For use with the wireline casing advancer. NOTE: Refer to the ITHT Product Manual or the Diamond Products Field Manual for additional operating information. 46645 49618 4102625 4102631 4101792 509726 4051228*
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Casing Bits
Casing Bit The inside diameter of the casing bit is set with diamonds and is smaller than the casing shoe. It will not permit the passage of the core barrel. Applications: Used when deep or difficult overburden is encountered. When reaming operations are completed, the casing string is removed from the hole and a casing shoe is substituted for a casing bit before normal drilling operations recommence. Casing Bits BW V-Ring BW Econo Casing Bits - Sourced from Europe BW V-Ring ** Available on special request. NOTE: Refer to the ITHT Product Manual or the Diamond Products Field Manual for additional operating information. 52729 509151 **
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual or the Diamond Products Field Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Retrievable Diamond Wedging Tools - Sourced from Australasia Bull Nose Bit to suit Clappison AQ Bit to suit BW Wedge - A Thread Clappison/Hall-Rowe Pilot Reaming Assembly 1 BQ Wedging Reaming Bit - B Thread 2 BQ Wedging Reaming Shell - B Thread 3 BQ Bullnose Bit - B Thread 4104124 4104104 4104110 4101963
NOTE: Refer to the ITHT Product Manual or the Diamond Products Field Manual for additional operating information.
1 1
1 2
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Core Barrels
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Core Barrels - BQ
Next Q Core Barrels Head Assembly Inner Tube Components Outer Tube Components Extended Core Barrels Spare Parts Kit
NOTE: All core barrels will require some assembly upon receipt of shipment. Please refer to Packaging Information and Assembly Instructions.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Core Barrel - BQ
Boart Longyear offers a field proven standard BQ core barrel for use with BQ/BRQHP rods. It consists of the head assembly (item 1), inner tube components (items 2-5), and outer tube components (items 611). The In-The-Hole Tools Product Manual and core barrel Safety Poster are included with all core barrels. All head assemblies are supplied with landing indication installed. Refer to the Head Assembly section. How to Order: To order a standard core barrel: Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. Options: There are alternatives to the standard core barrel which are indicated by a . To view these options refer to the head assembly, inner tube components and/or outer tube components sections. How to Order: To order a non-standard core barrel: Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. List all optional parts and part numbers from the head assembly, inner tube components and/or outer tube components sections. NOTE: For information on packaging and assembly, refer to the packaging and/or assembly sections. Core Barrels 1-13 1-13 306411 BQ Core Barrel 1.5 m / 5 ft 306412 BQ Core Barrel 3.0 m / 10 ft kg lbs Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Standard Configuration 1 3542292 BQ Head Assembly* 2 24356 Inner Tube, 1.5 m / 5 ft 2 24339 Inner Tube, 3.0 m / 10 ft 3 24831 Stop Ring 4 30487 Core Lifter 5 24830 Core Lifter Case 6 3545400 BQ Full-Hole Tanged Locking Coupling 7 24833 Adapter Coupling 8 24345 Landing Ring 9 24357 Outer Tube, 1.5 m / 5 ft 9 24346 Outer Tube, 3.0 m / 10 ft 10 44406 Inner Tube Stabilizer 11 24348 Thread Protector 12 3541994 ITHT Product Manual (not shown) 13 306390 Safety Poster (not shown) Additional options available. * See the head assembly section for a detailed configuration and available options.
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
9 6
7 3 10 4
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Head Assembly - BQ
The standard head assembly is supplied with landing indication (items 15-16) installed. Landing indication must be reset by popping the ball back through the bushing after each use (see the ITHT Product Manual). If you do not wish to use landing indication, it must be removed or slow descent times may result. Options: There are alternatives to the standard head assembly which are indicated by a . If options are ordered, the standard head assembly is supplied with the options shipped as separate items (not installed). How to Order: To order a non-standard core barrel: Select a 1.5 m/5 ft or 3.0 m/10 ft core barrel part number. List all optional parts and part numbers from this page, and/or the options from the inner tube and outer tube components sections. NOTE: For information on packaging and assembly, refer to the packaging and/or assembly sections. Head Assembly 1-28 3542292 BQ Head Assembly Standard Configuration 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 28A 28B 28C 28D 42913 15141 42914 3544135 42905 3541647 23941 3541932 306427 3543180 3541621 306417 306418 23944 62374 62380 306421 306578 3548183 44601 24331 44208 24335 24030 24336 24031 103144 40655 17447 24943 40676 40656 Spearhead Point Compression Spring Detent Plunger Spearhead Base Spirol Pin 7/16" x 1" Latch Retracting Case Sping Pin 3/8" x 1-3/4" Nyloc Bolt 3/8 -16UNC x 3/4 Washer Latch Compression Spring Upper Latch Body Latch Link Spring Pin 3/8" x 1-1/4" Stainless Steel Ball, 22 mm Landing Indicator Bushing Landing Shoulder Lower Latch Body Washer, Nord-lock Hex Nut Spindle Shut-Off Valve, Hard Valve Adjusting Washer Thrust/Hanger Bearing Spindle Bearing Compression Spring Stover Lock Nut Inner Tube Cap Assembly (27A, B, C, D) Grease Fitting Stainless Steel Ball, 3/4 Inner Tube Cap Check Valve Body kg lbs Qty 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 Qty 2 Qty 1 1 1 1
19 20
1 5 2
21
22A 22 22A 23 7 22 23 8 24 25 9 10 12 24 13 26 14 7
Optional Fluid Retention* A 3542609 Fluid Retention Kit A1 62374 Stainless Steel Ball, 22 mm A2 306131 Fluid Retention Bushing A3 306443 Fluid Retention Spring, Light A4 306444 Fluid Retention Spring, Medium
11 13 12
* This kit can replace landing indication when drilling in lost circulation conditions. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
16 A1 17 A2 A3 A4
BOART LONGYEAR
BQ
2A 24356CP Inner Tube CP 1.5 m / 5 ft 2A 24339CP Inner Tube CP 3.0 m / 10 ft Option for Stabilized Reaming Shells A 34687 Inner Tube Extension
1 1 Qty 1
* See the head assembly section for a detailed configuration and available options. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
2 1
4A
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Q Locking Coupling Options 6A 3545401 BQ Full-Hole 6B 24832 BQ Conventional Tanged 6C 62762 BQ Conventional
9A 6 9 6A 6B 6C
Outer Tube Component Options 9A 3545386 Full-Hole Outer Tube, 1.5 m / 5 ft* 9A 3545387 Full-Hole Outer Tube, 3.0 m / 10 ft* Optional Chrome Plating
To order chrome plated outer tubes (45 cm (18 in) at both ends on the outside diameter) use the following part numbers.
9B 24357CP Outer Tube CP 1.5 m / 5 ft 9B 24346CP Outer Tube CP 3.0 m / 10 ft * Full hole outer tubes are supplied chrome plated 45 cm (18 in) at both ends on the outside diameter as standard.
1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
10
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
Head Assembly
Locking Coupling
Adapter Coupling
Landing Ring
Inner Tube Stabilizer 1 Outer Tube Inner Tube Inner Tube Stabilizer Reaming Shell
Bit
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
11 1 12 20 2 13 3 4 5 6 16 23 7 17 8 9 10 24 18 19 14 22 21
15
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Next Q Core Barrels Head Assembly Inner Tube Components Outer Tube Components Extended Core Barrels Spare Parts Kit
NOTE: All core barrels will require some assembly upon receipt of shipment. Please refer to Packaging Information and Assembly Instructions.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
3 9 7 4
10
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Standard Configuration 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 28A 28B 28C 28D 42913 15141 42914 3544135 42905 3541647 23941 3541932 306427 3543180 3541621 306435 306418 23944 62374 62380 306437 306578 3548183 44601 24331 64354 24335 24030 24336 24031 103144 53212 17447 24943 53196 40656 Spearhead Point Compression Spring Detent Plunger Spearhead Base Spirol Pin 7/16" x 1" Latch Retracting Case Spring Pin 3/8" x 1-3/4" Nyloc Bolt 3/8 -16UNC x 3/4 Washer Latch Compression Spring 1 Upper Latch Body Latch Link Spring Pin 3/8" x 1-1/4" Stainless Steel Ball, 22 mm Landing Indicator Bushing Landing Shoulder Lower Latch Body Washer, Nord-lock Hex Nut Spindle Shut-Off Valve, Hard Valve Adjusting Washer Thrust/Hanger Bearing Spindle Bearing Compression Spring Stover Lock Nut Inner Tube Cap Assembly (27A, B, C, D) Grease Fitting Stainless Steel Ball, 3/4 Inner Tube Cap Check Valve Body
19 20
1 5 2
21
22A 22 22A 23 7 22 23 8 24 25 9 10 12 24 13 26 14 7
Optional Fluid Retention* A 3542609 Fluid Retention Kit A1 62374 Stainless Steel Ball, 22 mm A2 306131 Fluid Retention Bushing A3 306443 Fluid Retention Spring, Light A4 306444 Fluid Retention Spring, Medium
11 13 12
* This kit can replace landing indication when drilling in lost circulation conditions. NOTE: Bold items are unique to BQTK, all others items are the same as BQ. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
16 A1 17 A2 A3 A4
BOART LONGYEAR
BQ
2A 61518CP Inner Tube CP 1.5 m / 5 ft 2A 53197CP Inner Tube CP 3.0 m / 10 ft * See the head assembly section for a detailed configuration and available options.
1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
2 1
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
8A
1 1
6A
Standard outer tubes are manufactured with high strength quench and tempered tubing. * Full hole outer tubes are supplied chrome plated 45 cm (18 in) at both ends on the outside diameter as standard. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
9 7 10
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
Head Assembly
Locking Coupling
Landing Ring
Bit
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
11 1 12 20 2 13 3 4 5 6 16 23 7 17 8 9 10 24 18 19 14 22 21
15
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Pump-In Core Barrels Head Assembly Inner Tube Components Outer Tube Components Extended Core Barrels Spare Parts Kit
NOTE: All core barrels will require some assembly upon receipt of shipment. Please refer to Packaging Information and Assembly Instructions.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Additional options available. * See the head assembly section for a detailed configuration and available options. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
9 6
7 3 10 4
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
23 12 24 13
11 13 1 5 2 12 15
14
3 4
25A 26 25A 26 27 28
25 6 25 17 18 7
16 19 27 29 30 31 C 21 A 22 19 9 20 10 8
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
B D
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
1 1 Qty 1
* See the head assembly section for a detailed configuration and available options. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
4A
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
6A
9A 3545386 Full-Hole Outer Tube, 1.5 m / 5 ft* 9A 3545387 Full-Hole Outer Tube, 3.0 m / 10 ft* Optional Chrome Plating
To order chrome plated outer tubes (45 cm (18 in) at both ends on the outside diameter) use the following part numbers.
9A
9B 24357CP Outer Tube CP 1.5 m / 5 ft 9B 24346CP Outer Tube CP 3.0 m / 10 ft * Full hole outer tubes are supplied chrome plated 45 cm (18 in) at both ends on the outside diameter as standard.
1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
10
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Adapter Coupling
Landing Ring
Bit
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
11 19
2 3
20 21 12 13
4 5
22
14 6 15 7 16 8 17 9 18 10 25 24 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
BOART LONGYEAR
BQ
Pump-In Core Barrels Head Assembly Inner Tube Components Outer Tube Components Extended Core Barrels Spare Parts Kit
NOTE: All core barrels will require some assembly upon receipt of shipment. Please refer to Packaging Information and Assembly Instructions.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Standard Configuration 1 2 2 3 4 5 6 7 8 9 9 10 11 12 13 3544014 61518 53197 53198 61536 53199 3545402 3544043 53202 61517 53193 53201 61664 3541994 306390 BQTKU Head Assembly* Inner Tube, 1.5 m / 5 ft Inner Tube, 3.0 m / 10 ft Stop Ring Core Lifter Core Lifter Case BRQLW Full-Hole Locking Coupling Drive Coupling Landing Ring Outer Tube, 1.5 m / 5 ft Outer Tube, 3.0 m / 10 ft Inner Tube Stabilizer Thread Protector ITHT Product Manual (not shown) Safety Poster (not shown)
Additional options available. * See the head assembly section for a detailed configuration and available options. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
9 6 2
Inner Tube Loading Sleeve, reference only. See Tools section.
7 3 10 4
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
23 12 24 13
11 13 1 5 2 14 15 12 3 4
25A 26 25A 26 27 28
25 6 25 17 18 7
16 19 27 29 30 31 C 21 A B D 22 19 9 20 10 8
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
kg
lbs Qty 1 1 1 1 1 1
2A 61518CP Inner Tube CP 1.5 m / 5 ft 2A 53197CP Inner Tube CP 3.0 m / 10 ft * See the head assembly section for a detailed configuration and available options.
1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
9A 6 6A
To order chrome plated outer tubes (45 cm (18 in) at both ends on the outside diameter) use the following part numbers.
1 1
Standard outer tubes are manufactured with high strength quench and tempered tubing. * Full hole outer tubes are supplied chrome plated 45 cm (18 in) at both ends on the outside diameter as standard. NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
7 10
11
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Adapter Coupling
Landing Ring
Bit
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
11 19
2 3
20 21 12 13
4 5
22
14 6 15 7 16 8 17 9 18 10 25 24 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Overshots
Compact Overshot Ezy Lock Underground Loading Chamber Wireline Cable Spare Parts Kits
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
2 3 4 24 7 5
NOTE: Refer to Tech Data for technical specifications and the ITHT Product Manual for additional operating information.
10 11 12 8 13
14
16 15 16 23 20 19 18 21 22
12/06-MKT1644 2006 Boart Longyear Inc.
19
17
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
13
2 3 4 5 7
Releasing the Overshot Assembly If the inner tube assembly becomes stuck in the outer tube, the tension on the wireline cable can be increased until the shear pin (item 9) fails, releasing the wireline cable. NOTE: Refer to the ITHT Product Manual for additional operating information.
6 14 14 8 15 9
16
10 11 12
18 17
19 20
21
18
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
13
2 3 4 5 7
Releasing the Overshot Assembly If the inner tube assembly becomes stuck in the outer tube, the tension on the wireline cable can be increased until the shear pin (item 9) fails, releasing the wireline cable. NOTE: Refer to the ITHT Product Manual for additional operating information.
6 14 14 8 15 9
16
10 11 12
18 17
19 20
21
18
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Loading Chamber
Application: Underground applications with BQU/BQTKU core barrels. Select assembly according to rods string type - BRQHP/BRQLW/BQ. Used to pump the overshot into the hole for retrieval of the inner tube assembly. Identification groove supplied on BRQLW loading chamber body. Wireline Cable, reference only. See Overshot section. Assembly 1-5 3541911 BRQHP Loading Chamber Assembly Parts 1 3541817 Packing Plug 2 3541816 Cable Guide Washer 3/16 3 25546 Cable Packing 4 104597 Quick Coupler Tip #16 NPT 5 3541917 Loading Chamber Body Assembly kg kg lbs Qty 1 2 1 1 1 lbs Qty 1 2 1 1 1 kg lbs Qty 1 2 1 1 1 Qty BRQLW Drill Rod Extension, 7-1/2 BRQHP Drill Rod Extension, 7-1/2 BQ Drill Rod Extension, 7-1/2 #16 NPT Quick Coupler Body, Female 1 1 1 1
1-5 3541821 BRQLW Loading Chamber Assembly Parts 1 3541817 Packing Plug 2 3541816 Cable Guide Washer 3/16 3 25546 Cable Packing 4 104597 Quick Coupler Tip #16 NPT 5 3541820 Loading Chamber Body Assembly 1-5 3542493 BQ Loading Chamber Assembly
2 3 2
Parts 1 3541817 Packing Plug 2 3541816 Cable Guide Washer 3/16 3 25546 Cable Packing 4 104597 Quick Coupler Tip #16 NPT 5 3542495 Loading Chamber Body Options 6 3544739 6 3547305 6 3546848 7 100876
NOTE: Identification groove supplied on BRQLW loading chamber body. The drill rod extension must be used to extend the drill string past the running overshot in order to attach the loading chamber. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Wireline Cable
Swaged Construction Wire Rope Features: Longer life. Safer to handle. 50% higher breaking strength than cable previously offered. High resistance to unraveling, resists bird nesting. Compatible with 3/16 nicopress oval sleeve (p/n 30172). NOTE: Swaged cable is not recommended for underground applications where minimum radius is less than 127 mm (5 inches). Wireline Cable 1 3542822 2 19437 Swaged 3/16 (4.8 mm) Galvanized, 3/16 kgs/m 0.134 kg 0.02 lbs/ft 0.090 lbs 0.05
NOTE: For more information on the oval sleeve crimping tool, refer to the Tools section. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
Crimping Tool
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Replace lifting dogs in matched sets, incorrectly matched lifting dogs may result in product failure and safety hazard.
1 2 9 3
4 10 11 6
Compact Overshot
kg
lbs Qty
7 8
12 13
1-14 Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 10 2 11 3 4 5 11
25986 25985 44615 17447 22834 100690 43133 44573 36555 25386 64539 25384 23944 25383
Thrust Bearing Castle Nut Cotter Pin Grease Fitting Shear Pin 3/16" x 1-11/16" Pump-In Lip Seal Adjusting Washer Hex Nut O Ring Valve Spring Lifting Dog Compression Spring Spring Pin 3/8" x 1-1/4" Plain Pin 1/2" x 1-11/16" kg
1 1 2 1 1 2 2 1 4 1 2 1 1 1 lbs Qty
Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 25986 25985 44615 17447 22834 64683 43133 44573 36555 25386 64539 25384 23944 25383 Thrust Bearing Castle Nut Cotter Pin Grease Fitting Shear Pin 3/16" x 1-11/16" Pump-In Lip Seal Adjusting Washer Hex Nut O Ring Valve Spring Lifting Dog Compression Spring Spring Pin 3/8" x 1-1/4" Plain Pin 1/2" x 1-11/16"
12 13
8 14 9
1 1 2 1 1 2 2 1 4 1 2 1 1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
12/06-MKT1644 2006 Boart Longyear Inc. P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Drill Rods
RQ HP RQ LW Q
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Metric Lengths 1 3541308 BRQHP Drill Rod, 1.5 m 1 306238 BRQHP Drill Rod, 3.0 m Imperial Lengths 1 3541340 BRQHP Drill Rod, 2 ft 1 3541378 BRQHP Drill Rod, 5 ft 1 3541555 BRQHP Drill Rod, 10 ft
kg
lbs
Box
Pin
RQ HP Thread Profile
RQ HP high performance drill rod: Unsurpassed joint performance with low stress RQ LW thread design. Super strong thru-wall hardened box and pin ends. Exclusive electric induction surface hardening for superior wear resistance. Increased thread life with electric induction surface hardened pin thread crests and thru-wall hardened box threads. Tight mechanical seal reducing fluid loss. Increased joint taper and unique thread lead-in reducing cross threading and jamming. Z-50 Thread Compound (p/n 306486) is the recommended thread lubricant to reduce wear and the possibility of galling during drilling operations. To reduce the friction between the walls of the hole and the drill rod, apply rod grease (p/n 62796) to the surface of the drill rods. Rod grease also reduces in-hole vibration, increasing tool and equipment service life. Drill rods MUST be pretorqued with the minimum recommended make-up torque to preload the box and pin prior to drilling. Drilling torque alone will not make-up the joint. Drilling operating torque should never exceed make-up torque. NOTE: RQHP drill rods are NOT compatible with RQLW drill rods. Drill rods are sold by the bundle, see Packaging Information section. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Metric Lengths 1 3540867 BRQLW Drill Rod, 1.5 m 1 306227 BRQLW Drill Rod, 3.0 m Imperial Lengths 1 3541343 BRQLW Drill Rod, 2 ft 1 3541379 BRQLW Drill Rod, 5 ft 1 3541174 BRQLW Drill Rod, 10 ft
kg
lbs
Box
Pin
RQ LW light weight drill rod: Light weight, parallel wall tubing provides increased drilling capacity. Standard outer diameter to fit existing chuck jaws. Unsurpassed joint performance with low stress RQLW thread design. Super strong thru-wall hardened box and pin ends. Exclusive electric induction surface hardening for superior wear resistance. Increased thread life with electric induction surface hardened pin thread crests and thru-wall hardened box threads. Tight mechanical seal reducing fluid loss. Increased joint taper and unique thread lead-in reducing cross threading and jamming. Z-50 Thread Compound (p/n 306486) is the recommended thread lubricant to reduce wear and the possibility of galling during drilling operations. To reduce the friction between the walls of the hole and the drill rod, apply rod grease (p/n 62796) to the surface of the drill rods. Rod grease also reduces in-hole vibration, increasing tool and equipment service life. Identification groove supplied on RQLW accessories. Drill rods MUST be pretorqued with the minimum recommended make-up torque to preload the box and pin prior to drilling. Drilling torque alone will not make-up the joint. Drilling operating torque should never exceed make-up torque. NOTE: RQLW drill rods are NOT compatible with RQ HP drill rods. Drill rods are sold by the bundle, see Packaging Information section. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Q Drill Rods
Metric Lengths 1 1 51580 BQ Drill Rod, 1.5 m 51581 BQ Drill Rod, 3.0 m kg lbs 9.0 19.9 18.0 39.7 kg lbs
Box
Pin
Imperial Lengths 1 1 1 51555 BQ Drill Rod, 2 ft 51556 BQ Drill Rod, 5 ft 51557 BQ Drill Rod, 10 ft
Q Thread Profile
Z-50 Thread Compound (p/n 306486) is the recommended thread lubricant to reduce wear and the possibility of galling during drilling operations. To reduce the friction between the walls of the hole and the drill rod, apply rod grease (p/n 62796) to the surface of the drill rods. Rod grease also reduces in-hole vibration, increasing tool and equipment service life. Drill rods MUST be pretorqued with the minimum recommended make-up torque to preload the box and pin prior to drilling. Drilling torque alone will not make-up the joint. Drilling operating torque should never exceed make-up torque. NOTE: Drill rods are sold by the bundle, see Packaging Information section. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
Surface Hardened
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Water Swivels
Surface Compact Plus Water Swivel Surface Universal Water Swivel Underground Hi-Speed Water Swivel Underground Compact Plus Water Swivel Hose and Connections Surface Underground Spare Parts Kits
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
10
#16 NPT NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information. AW Rod Box
2 3 11 4
Reference only. See Water Swivel Hose.
12
14
13
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
11
#20 NPT
12
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
3 13
4 14 5
15 6
7
Reference only, see Adapter Sub section.
10
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on RQLW water swivel body. It is essential to use suitable lubricant when fitting the swivel seal like soft hand soap and water, or glycerine. Light mineral oil may also be used sparingly. Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information. #12 JIC
Ensure the rough surface of the face seal is towards the bearing. Do not use hydrocarbon based liquids on ethylene propylene bellows, and do not use grease (including silicon grease) on any elastomer bellows.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
10
#16 NPT
AW Rod Box
2 3 11 4
Reference only. See Water Swivel Hose. Water Saver Sub, reference only. See Adapter Sub section
12
14
13
BOART LONGYEAR
BQ
1 18473 #20 NPT 90 Street Elbow 2 35879 #20 NPT to #16 JIC-M 3 3542419 Water Swivel Hose, 9 m (30 ft) 4 18185 Discharge Assembly, #20 NPT
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
#16 NPT
AW Rod Box
#20 NPT
BW Rod Box
2 4 to pump
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
3
#16 NPT
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
AW Rod Box
#12 JIC
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
1
#16 NPT
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
3
AW Rod Box
2A
1A
#12 JIC
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
1 5 2 6 3
1 23863 Washer Spring 2 19678 O Ring 3 23861 Swivel Packing 4 3546530 Wear Sleeve 5 20324 Ball Bearing 6 20169 O Ring 7 3546908 Thrust Bearing 8 25612 Felt Seal NOTE: Refer to the ITHT Product Manual for additional operating information.
Spare Parts Kit 1-3 3546541 U/G Hi-Speed Water Swivel Parts
kg
lbs Qty 1 1 1
1 24243 Ball Bearing 2 3546524 Ball Bearing 3 3546525 Seal Assembly NOTE: Refer to the ITHT Product Manual for additional operating information.
1 5
Spare Parts Kit 1-7 Parts 67628 Universal Water Swivel kg lbs Qty 39171 29737 67186 40965 19906 39170 67187 Swivel Packing O Ring Lock Washer Retaining Ring Ball Bearing Spindle Extension Ball Thrust Bearing 1 1 1 1 1 1 1
6 2
3 7 4
1 2 3 4 5 6 7
NOTE: Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Hoisting Plugs
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
3 5 4
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information. Options 10 3542907 Shackle Guide Qty 1
3 5 4
10
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Casing
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Casing
Metric Lengths kg lbs
1
Box Pin
1 1
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information. W Thread Profile Thread Lubrication Z-50 Thread Compound (p/n 306486) is the recommended thread lubricant to reduce wear and the possibility of galling during drilling operations.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Casing Cutter
Features: Used for cutting BW casing at any point in a drill hole when the entire string can not be retrieved. BQ rod box connection. Operations: Upon lowering the assembly, the cutting lugs are retracted inside the body by the spring. With low rotation (25 rpm) initially, the cutting lugs are forced out using water pressure, 1 380 kpa (200 psi). A drop in pressure indicates that the cutting operation is complete. Assembly 1-12 Parts 1 2 3 4 5 6 7 8 9 10 11 12 61265 52776 21837 14520 14519 15260 14522 14521 14517 14523 14587 44663 Retaining Ring Plunger Case Stainless Steel Ball, 15/16 Water Tube Plunger Shear Pin Spring Spring Rest Body Casing Cutter Lug Casing Cutter Pin Set Screw 52775 BW Casing Cutter Assembly kg lbs Qty 1 1 1 1 1 1 1 1 1 2 2 1
NOTE: Refer to the ITHT Product Manual for additional operating information.
5 6
7 8 10 9
10 11 11 12
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
1 14 2
3 15
Rock Roller Bit, 57.2 mm (2-1/4) - A R/P Thread 16 97179 Two Cone Carbide Tungsten Button (for very hard formations)
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
6 5 6 7 7
Reference only. See Oversized Casing Shoe in the Diamond Products section.
10 8 10
11
12
13
16
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Recovery Tools
Rod Recovery Taps Casing Recovery Taps Wireline Cable Recovery Tools
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Parallel Wall Rod Recovery Tap 1 306060 BRQLW Rod Recovery Tap
NOTE: Identification groove supplied on BRQLW rod recovery tap. Optional Pilot Bit 2 * * BQ Pilot Bit kg lbs
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
BOART LONGYEAR
BQ
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Adapter Subs
Drill Rod Adapter Subs Water Swivel Adapter Subs Hoisting Plug Adapter Subs Casing Adapter Subs Recovery Tool Adapter Subs Blank End Adapter Subs Water Saver Sub
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on RQLW accessories. Refer to the ITHT Product Manual for additional operating information. Reference only. See Water Swivel section. Reference only. See Water Swivel section. Reference only. See Water Swivel section.
2 1
4
Reference only. See Drill Rod section. Reference only. See Drill Rod section.
4
Reference only. See Drill Rod section.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
5.4 12.0 3.4 7.5 5.4 12.0 kg 3.3 3.1 3.3 lbs 7.3 6.9 7.3
Reference only. See Hoisting Plug section. Reference only. See Hoisting Plug section.
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information.
Bullnose Adapter Sub: Curved lead-in nose guides the sub into the rod box eliminating unwanted stabbing damage. Sub thread has minimum stand-off allowing it to be made-up fully by hand ensuring a full capacity connection.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information. Reference only. See Drill Rod section.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Identification groove supplied on BRQLW subs. Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Conversion Kits
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Conversion Kits
Assembly 1-15 3546749 Ezy Lock Overshot Conversion Kit Parts kg lbs Qty 3546821 62904 3548184 3546823 3544104 3546883 3545053 3543772 3546825 6951 6950 42941 29073 3546747 3545073 Jar Staff Hex Nut 9/16 UNC Washer, Nord-lock Cap, Ezy Lock O/Shot Spring, Ezy Lock O/Shot Sleeve, Ezy Lock O/Shot Compression Spring Ball 11/32" Ezy Lock Overshot Head Compression Spring Lifting Dog Plain Pin 1/2" x 1-1/2" Spring Pin 3/16" x 1-3/8" Locking Pin Set Screw, 3/8 UNF x 3/4 Nyloc 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1
8 7 15 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
10 12 11 11 13 14 9 2 3
kg
lbs Qty
3 1
Parts 1 2 3 4 3546531 3546532 3546533 3546534 Upper Swivel Body Spindle Thrust Ball Bearing Lower Swivel Body
1 1 1 1
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Wedges
Bypass Wedge
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Bypass Wedges
Deflection wedges are used to alter the course of a drill hole in a number of applications: Intersecting targets at a stipulated angle. Intersecting multiple targets below a common drill hole collar. Allowing multiple target intersections by drilling branch holes from a previously drilled parent hole. To bypass problematic areas or abandoned equipment in a hole to allow drilling to continue. Bypass Wedge 1 2 3 4 5 6 7 3547315 3542975 3542976 3547292 3547374 3542977 3542979 BQ Bypass Wedge BQ Plug, Wooden BQ Wedge Dropper, BW R/B Copper Shear Pin BQ Adapter BQ Wedge Plug BQ Steel Plug Basket kg 56.8 0.4 11.8 0.1 1.3 3.8 0.7 lbs 125 1.0 26 0.25 2.95 8.5 1.53
Boart Longyear's Bypass wedges provide a nominal 1.5 deflection. It is recommended that multiple wedges are not installed closer than 15m (50ft) apart.
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Tools
Inner/Outer Tube Wrenches Pipe Wrenches Rod Wrenches Wireline Cable Tools Inner Tube Pliers Head Assembly Tool Inner Tube Loading Sleeve Pressure Relief Kit Relief Valve
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
2 5 4 4
Assembly 1-5 Parts 1 2 3 4 5 48916 29025 38581 38582 28251 Stationary Jaw Swing Jaw Pin Retaining Ring Wrench Handle 25318 Full Grip BQ Inner Tube Wrench
kg 1.6
Assembly 1-5 Parts 1 2 3 4 5 28253 28254 38581 38582 28251 Stationary Jaw Swing Jaw Pin Retaining Ring Wrench Handle 28252 Full Grip BQTK/BQ Outer Tube Wrench
kg 2.0
NOTE: Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Pipe Wrenches
Assembly 1-5 14942 18 Heavy Duty Pipe Wrench kg 2.6 lbs 5.8 Qty 14944 14943 200561 200562 Hook Jaw Heel Jaw with Pin Coil and Spring Wrench Nut Wrench Handle (included) kg 24 Heavy Duty Pipe Wrench 4.3 1 1 1 1 1 lbs 9.4 Qty 14947 14946 200563 200564 Hook Jaw Heel Jaw with Pin Coil and Spring Wrench Nut Wrench Handle (included) kg 36 Heavy Duty Pipe Wrench* 1 1 1 1 1 lbs
1 2
4
Parts 1 2 3 4 5
5 3 3 2
Assembly 1-5 Parts 1 2 3 4 5 14950 14949 200565 200566 Hook Jaw Heel Jaw with Pin Coil and Spring Wrench Nut Wrench Handle (included) 14948
Estimated Torque 45 KG (100 LB) HAND LOAD 18 Heavy Duty Pipe Wrench ..................................................... 24 Heavy Duty Pipe Wrench ..................................................... 36 Heavy Duty Pipe Wrench ..................................................... 48 Heavy Duty Pipe Wrench .....................................................
Nm Nm Nm Nm
ft ft ft ft
Assembly 1-5 Parts 1 2 3 4 5 14953 14952 200567 200568 Hook Jaw Heel Jaw with Pin Coil and Spring Wrench Nut Wrench Handle (included) 14951 48 Heavy Duty Pipe Wrench
* Recommended for making up B size drill rod, however it is not sufficient for deep holes, a hydraulic make and break system is recommended. NOTE: Refer to the Tech Data section for drill rod pretorque and the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Rod Wrenches
6 5
Assembly 1-7 Parts 1 2 3 4 5 6 7 43415 43418 43484 43485 38583 43422 43483 Stationary Jaw Swing Jaw Pin, 5/8 x 4 Pin, 5/8 x 2-3/4 Retaining Ring Spring Wrench Handle 43481 BRQHP/BRQLW/BQ Rod Wrench* kg lbs 6.2 13.6 Qty 2 1 1 1 4 1 1
5 4
* Recommended for making up B size drill rod, however it does not provide sufficient torque for rod joints in holes beyond 230 m (750 ft). NOTE: Refer to the Tech Data section for drill rod pretorque and the ITHT Product Manual for additional operating information.
5 7
Estimated Torque 45 KG (100 LB) HAND LOAD BRQHP/BRQLW/BQ Rod Wrench .............................................. 200 Nm (150 ft lbf)
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
Wireline cable
Eye Bolt
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
NOTE: Refer to the ITHT Product Manual for additional operating information.
Reference only. See Core Barrel section for locking couplings or the Drill Rods section.
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Relief Valve
This rugged pressure relief valve ensures protection of your pump during drilling operations. It automatically snaps to full open position when the predetermined pressure is exceeded. The pressure setting can be adjusted within the operating range by simply turning the adjusting screw on the top of the valve. Assembly 1-8 3546492 Relief Valve Parts 1 2 3 4 5 6 7 8 21841 22179 3546493 3546494 24313 3546495 21837 3546496 Adjusting Screw Jam, Brass Nut Body Spring Guide Spring Ball Holder Steel Ball, 15/16 Seat kg lbs Qty 1 1 1 2 2 1 4 4
NOTE: Refer to the Tech Data section for technical specifications and the ITHT Product Manual for additional operating information.
6 7
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Technical Data
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
BOART LONGYEAR
BQ
Technical Data
Nominal Dimensions HOLE DIAMETER (REAMING SHELL GAUGE) .......... 59.82/60.07 mm (2.355/2.365 in) HOLE VOLUME (REAMING SHELL GAUGE) .................................. 2.83 L/m (0.23 gal/ft) CORE DIAMETER/BIT INSIDE DIAMETER BQ/BQU ................................................................. 36.27/36.53 mm (1.428/1.438 in) BQTK/BQTKU ........................................................ 40.54/40.79 mm (1.596/1.606 in) BIT OUTSIDE DIAMETER ............................................. 59.56/59.82 mm (2.395/2.355 in) BIT KERF WIDTH BQ/BQU ........................................................................................... 11.7 mm (0.46 in) BQTK/BQTKU .................................................................................... 9.6 mm (0.38 in) LOCKING COUPLING OUTER DIAMETER BQ/BRQHP Full Hole ................................................................. 59.51 mm (2.343 in) BQ/BRQHP Conventional .......................................................... 59.56 mm (2.345 in) BRQLW Full Hole ...................................................................... 59.69 mm (2.350 in) BRQLW Stabilized ..................................................................... 59.82 mm (2.355 in) CORE BARREL OUTER TUBE Outer Diameter .............................................................................. 57.2 mm (2.25 in) Outer Diameter Full Hole ............................................................. 59.4 mm (2.34 in) Inner Diameter BQ/BQU ........................................................................................... 46.0 mm (1.81 in) BQTK/BQTKU .................................................................................. 49.3 mm (1.94 in) Minimum Flat Diameter - Full Hole ......................................... 55.70 mm (2.193 in) CORE BARREL INNER TUBE Outer Diameter BQ/BQU ........................................................................................... 42.9 mm (1.69 in) BQTK/BQTKU .................................................................................. 46.2 mm (1.82 in) Inner Diameter BQ/BQU ........................................................................................... 38.1 mm (1.50 in) BQTK/BQTKU .................................................................................. 41.4 mm (1.63 in) ROD BODY Outer Diameter .............................................................................. 55.9 mm (2.20 in) Inner Diameter BRQHP/BQ ...................................................................................... 46.1 mm (1.81 in) BRQLW ............................................................................................ 48.4 mm (1.91 in) ROD PIN END LENGTH BRQHP .......................................................................................... 41.91 mm (1.65 in) BRQLW ......................................................................................... 40.64 mm (1.60 in) BQ ................................................................................................. 44.45 mm (1.75 in) Threads per Inch BRQHP/BQ .................................................................................... 3 Threads per Inch BRQLW ...................................................................................... 3.5 ROD WEIGHT BRQHP/BQ ................................................................................. 6.25 kg/m (4.20 lb/ft) BRQLW ....................................................................................... 4.90 kg/m (3.29 lb/ft) ROD CONTENT VOLUME BRQHP/BQ ................................................................................. 1.67 L/m (0.13 gal/ft) BRQLW ...................................................................................... 1.85 L/m (0.15 gal/ft) ROD DISPLACEMENT VOLUME BRQHP/BQ ................................................................................. 0.76 L/m (0.06 gal/ft) BRQLW ....................................................................................... 0.58 L/m (0.05 gal/ft) ROD/HOLE ANNULUS VOLUME ...................................................... 0.40 L/m (0.03 gal/ft) BW CASING Outer Diameter ............................................................................... 73.0 mm (2.88 in) Inner Diameter ............................................................................... 60.3 mm (2.38 in) Weight ......................................................................................... 10.4 kg/m (7.00 lb/ft) Drilling Guidelines RECOMMENDED FLOW ......................................................................................... 23 to 30 L/min (6 to 8 gpm) BIT WEIGHT RANGE ...................................................................................... 18 to 36 kN (4,000-8,000 lbf) BIT PENETRATION @ 1000 rpm Rate @ 80 r/cm (200 rpi) ....................................................... 13 cm/min (5.0 in/min) Rate @ 100 r/cm (250 rpi) .................................................... 10 cm/min (4.0 in/min) BIT PENETRATION @ 1700 rpm Rate @ 80 r/cm (200 rpi) ....................................................... 22 cm/min (8.5 in/min) Rate @ 100 r/cm ( 250 rpi) .................................................... 17 cm/min (6.8 in/min) WATER SWIVEL ROTATING LOAD RATING Compact Plus .......................................................................... 4 540 kg (10,000 lbs) Universal .................................................................................. 5 000 kg (11,000 lbs) Drilling Guidelines (contd) HOISTING PLUG STATIC LOAD RATING AND SAFETY FACTOR Standard ........................................................................... 5:1 = 6,800 kg (15,000 lb) ......................................................................................... 3:1 = 11 300 kg (25,000 lb) Heavy Duty ...................................................................... 5:1 = 13 500 kg (30,000 lb) ......................................................................................... 3:1 = 22 600 kg (50,000 lb) WIRELINE CABLE BREAKING STRENGTH 4.8 mm (3/16 in) Swaged ............................................................. 24.5 kN (5,500 lbf) 4.8 mm (3/16 in) Galvanized ....................................................... 16.5 kN (3,700 lbf) Rod Operating Specifications RATED MAXIMUM DEPTH BRQHP ............................................................................................. 3 000 m (9,843 ft) BRQLW ............................................................................................ 1 500 m (4,922 ft) BQ .................................................................................................... 1 220 m (4,000 ft) RATED MAXIMUM DRILLING PULLBACK BRQHP .......................................................................................... 250 kN (56,250 lbf) BRQLW ......................................................................................... 200 kN (45,000 lbf) BQ ................................................................................................. 115 kN (26,000 lbf) RATED MAXIMUM DRILLING TORQUE* BRQHP ..................................................................................... 1 500 Nm (1,100 ft lbf) BRQLW .......................................................................................... 895 Nm (660 ft lbf) BQ .................................................................................................. 555 Nm (410 ft lbf) RECOMMENDED MINIMUM MAKE-UP TORQUE to 1 000 m (3,280 ft) depth* BRQHP/BRQLW/BQ ...................................................................... 405 Nm (300 ft lbf) RECOMMENDED MINIMUM MAKE-UP TORQUE FOR DEEP HOLES* BRQHP/BRQLW over 1 000 m (3,280 ft) .................................... 680 Nm (500 ft lbf) BRQHP over 2 000 m (6,560 ft) .................................................. 950 Nm (700 ft lbf) MIDBODY MINIMUM YIELD STRENGTH BRQHP/BRQLW/BQ ................................................................. 621 MPa (90,000 psi) MIDBODY MINIMUM TENSILE STRENGTH BRQHP/BRQLW/BQ ............................................................... 723 MPa (105,000 psi) JOINT MINIMUM YIELD STRENGTH BRQHP/BRQLW ................................................................ 1 070 MPa (155,000 psi)) JOINT MINIMUM TENSILE STRENGTH BRQHP/BRQLW .................................................................. 1 241 MPa (180,000 psi) PURE TENSION TO FAILURE** BRQHP ........................................................................................ 445 kN (100,000 lbf) BRQLW ......................................................................................... 311 kN (70,000 lbf) BQ ................................................................................................. 254 kN (57,000 lbf) PURE TORSION TO FAILURE** BRQHP ..................................................................................... 7 460 Nm (5,500 ft lbf) BRQLW .................................................................................... 5 423 Nm (4,000 ft lbf) BQ ............................................................................................ 3 390 Nm (2,500 ft lbf) NOTE: Rod capacities and failure loads were determined by independent facility. A safety factor has been applied for the above ratings (applies to new, unused Boart Longyear rods, in a straight vertical down hole, assuming compliance to ITHT Product Manual and standard core drilling practices). Burst and collapse pressure ratings will be reduced under drilling loads. Operating torque should not exceed make-up torque. * Increase make-up torque to match operating torque as depth increases. ** These failure loads are for product comparison purposes ONLY. Drilling loads should not exceed rating values. Pressure Ratings (per API bulletin 5C3) BURST PRESSURE - Box Shoulder BRQHP Rod .............................................................................. 61.3 MPa (8,891 BRQLW Rod ............................................................................. 49.9 MPa (7,244 BQ Rod ...................................................................................... 39.5 MPa (5,729 BW Casing ................................................................................ 35.8 MPa (5,199 BURST PRESSURE - Midbody BRQHP/BQ Rod ...................................................................... 93.2 MPa (13,511 BRQLW Rod ........................................................................... 71.6 MPa (10,385 BW Casing .............................................................................. 79.6 MPa (11,545 COLLAPSE PRESSURE - Midbody BRQHP/BQ Rod ...................................................................... 97.3 MPa (14,117 BRQLW Rod ............................................................................. 67.0 MPa (9,718 BW Casing .............................................................................. 83.1 MPa (12,049
psi) psi) psi) psi) psi) psi) psi) psi) psi) psi)
P/N 3543105-M Boart Longyear Inc. is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.