Professional Documents
Culture Documents
Worked example
Beam-column example 2
Check cross-section classification: For a Class 1 outstand jange in compression cl/t,& I 9
Sheet 2 of 8
Rev
6
235
= 0.81
= 8.05; within
limit
Actual c,+/t,E= 49.6/0.81 = 61.0; within limit for pure bending Assume since compression of 160kN is very low compared with axial resistance of cross-section (A,f, = 10500 x355/10' =3727kN) that section is Class I under combined loading.
L,,,, = 1.0 L = 1.0 x5600 =5600mm for buckling about the y-y axis L,,,
= 1.0
= 1.0
A, L,,
li,
5600/213 76.4
= 0.34
Buckling curves: h / b = 528.3/208.8 = 2.53 > 1.2. For major axis buckling, use buckling curve 'a' (a = 0.21) For minor axis buckling, use buckling curve 'b' ( a = 0.34) Buckling reduction factors
x:
BS EN 1993-1-1 Cl 6..Z.1.2
@> = o . S [ l + ~ ( x , -0.2)+~~]=0.5[1+0.21(0.34-0.2)+0.342]=0.57 ,
X Y
0, +
d m = 0.57 + 40.572
- 0.34'
= 0.97 I I .O
O2=OS[I+a(/ZL -0.2)+/zf]=0.5[l+0.34(1.67-0.2)+1.672]=2.15
BS EN 1993-1-1 Cl 6..Z.1.2