Professional Documents
Culture Documents
Coral Bay Nickel Corporation: Equipment Type Roads/Streets To Take Remarks
Coral Bay Nickel Corporation: Equipment Type Roads/Streets To Take Remarks
The CBNC Equipment Route is prepared as a guide to all equipment drivers/operators who are driving equipment within the CBNC Plant site complex area. By having a fixed route for said equipment, safe transport of materials and supplies and ferrying of equipment are ensured. Meantime that some CBNC Plant site roads are being paved (concreted), this equipment route shall still be deferred until advised accordingly. Please find table below flow of equipment and the corresponding roads/streets these equipment shall take in the maneuver of specified equipment as follows: Equipment Type 1. CBNC Service Buses Roads/Streets to take Enters through the Main Gate and takes South Avenue and turns right to Central Street and disembarks employees at the front of Gen. Office Building. Exits at Central Street and proceeds to South Avenue towards Main Gate. Enters through the Main Gate and takes South Avenue. Exits also at South Avenue. Enters through Utility Gate and takes North Avenue and turns left at HPAL Street. Exits through Main Avenue and turns left to East Street and goes out at Utility Gate. Enters through Utility Gate and takes North Avenue and turns left at West Street. Exits through Main Avenue and turns left to East Street and goes out at Utility Gate. Enters through Utility Gate and turns left to East Street and turns right at MS Avenue and turns left at Methanol Unloading Tank. Exits through South Avenue and goes out at Main Gate. Enters through Ore Prep Gate and maneuvers to Ore Feed Area (Shake-out Machine/Ore Stockpile Area). Exits at Ore Prep Gate. Enters through the Main Gate and Exits Remarks
2. CBNC Vehicles
Service
3. Acid Haulers
4. Coal Truck
5. Methanol Truck
These equipment include the Wheel Loaders for Ore Feeding at Ore Prep Area Service Vehicles
Vehicles
through the Main Gate also. In some cases when Light Vehicles are used for supervision of Ore Feed, the Ore Prep gate will be used as entrance and exit using South Avenue. Enters through the Main Gate and takes South Avenue. Exits also at South Avenue.
Notes: 1. Service Vehicles and Equipment of Contractors during Major Shutdown operations will take different routes to be discussed separately. 2. While some portions of the road temporarily put under hold status. are under repair, this vehicle route is
3. This is to be discussed for evaluation and further comments by all others who may be affected by this road routing scheme.