Professional Documents
Culture Documents
EWSD Multiple QuestionBank 1
EWSD Multiple QuestionBank 1
EWSD
Q.1.
(4)
(a) DLUC0 & DLUC1 work on load sharing basis. (b) SN0 & SN1 work on hot standby basis. (c) MB(0) & MB(1) work on load sharing basis. (d) BAP(0) & BAP(1) work on hot standby basis for O&M functions. (load sharing/hot standby)
Q.2.
(7)
The channel registers are available in CP , whereas the call registers are
available in GP.
(b)
(c)
The DTMF digits during normal exchange operation are stored/ processed in CRP. whereas during stand-alone operation of R-DLUs EMSP module will be used for this
purpose.
(d) (e)
The load parameter to be used for creation of an LTG for connecting a line unit via V5.2 interface will be 52. Maximum number of PDCs used for connecting the DLUD with LTGs is 4 whereas this figure will be 16 if we are to connect DLUG to the LTGs.
Q.3.
True/False
(4)
(a)
If DLUC0 fails, DLUC1 will process the information for DIUD0 also.
- False
2
(b) During normal operation both the BAPs handle O&M functions & their share of - False -False
In an R-DLU, under normal operation the intra-DLU calls (Calls within the DLU) will -False
Q.4.
Where do we extend fire and air-conditioning alarms in the main exchange? (Mention the Unit name and the card name). SYPD, RM:EA (2)
Can we extend these alarms from Remote DLU sites also? If yes, on which card?
(1)
Yes, ALEX
Q.5. What devices can be connected via IOP UNI One O&M terminal (OMT or BCT boot or Netm Boot), MDD, MOD &MTD (4)