Professional Documents
Culture Documents
PMC Drill Pipe Catalogue Rev6
PMC Drill Pipe Catalogue Rev6
1.
Experienced Technology
PetroMaterials Corporation (PMC) was established in 1994, having its experienced training technology of
OCTG pipe & tubes and long term experienced production technology of OCTG and Drill Pipes.
Head Quarter is located in Tokyo, Japan . PMC have two(2) major facilities , one in Wakayama, Japan and
the other in CangZhou , China . Sales areas are China, Japan, Middle-East, South Asian area and North
America.
Wide range OCTG and Drilling materials available
Trading department is trading 50,000 tons OCTG materials annually to export Japanese products.
API OCTG, Sour Service OCTG, Drill Pipe, Drill Collar, HWDP and Premium Connection are available for
wide range size.
Two Production Locations
Two major Production location are in Japan and China. Threading OCTG, Drill Pipes, Drill Collar and HWDP
are manufactured to use Japanese high quality raw materials and high quality production technology.
Wakayama Works in Japan
Wakayama Works is located in the west of Japan closed to Sumitomo Metal Industries, Ltd. (SMI) and is
equipped with Upset machine, Walking beam type Heat-Treatment furnace with internal Quenching
System, Friction Welding for drill pipe, Threading lathe and NDI system.
Short deliver time can be available, since Mother pipe are being kept in stock which shall be supplied from
SMI and Nippon Steel Corporation (NSC).
CangZhou Works in China
CangZhou Works is located in south of Beijing which manufacture high quality Drill Pipe , HWDP and Drill
Collar supported by both experienced Japanese technology and Japan- made equipments.
Its mother upset pipe and Tool Joint Blank and Solid Bar for Drill Collar and HWDP are supplied from
Wakayama Works , Japan or US steel manufacturer . It has been equipped with Drill pipe manufacturing
Line (Friction welding, boring and turning lathe and NDI), Tool Joints line (Heat-treatment furnace and
threading) and Drill Collar and HWDP Line (Heat-Treatment, BTA, Turning lathe, Threading) and so on .
Line-up of Products
CASING and TUBING
PMC represent SMI (Sumitomo Metal Industries Ltd) and carry SMIs Casing and Tubing in stocks
Tubing: 2-3/8 to 4-1/2
Casing: 4-1/2 to 16
18-5/8 and 20 Casing with Buttress threads : PMC to buy ERW plain end pipes from JFE Steel & NSC
(Nippon Steel co.) and to cut threads at Wakayama Works , Japan to make finished Casing
Drill Pipes
Production range cover 2-3/8 to 6-5/8
PMC to purchase Green Tube from SMI and NSC and to perform Upset and Heat Treatment at Wakayama
Works followed by the Friction Welding to be performed at both Wakayama and CangZhou Works to
customers preference.
High Torque Drill Pipe and Sour Service Drill Pipes are available.
Start production of Tool Joint in July 2009.
HWDP (Heavy Wall Drill Pipe)
Both Friction welding and Integral Type are available
Friction welding Type : 4137H Materials and AISI 1340/G105 for Central part to be used for middle joints
are used.
Integral Type : Quenched and tempered 4145H materials are used
Drill Collar Slick and Spiral)
2-3/8 to 11 OD Drill Collar to AISI 4145HM are available.
Non Magnetic Drill Collar is also available.
2
2.
Mother Pipe
Tool Joint
Forged Materials
I
Turning & Boring
I
Heat Treatment
I
Hardness test
Mechanical Test
I
Threading
Inspection
I
Cold Work(Option)
I
Die Stamping
I
Surface Treatment
I
Hard Facing(Option)
I
Break in (Option)
I
Friction Welding
I
Remove Bead and Burr on ID Boring and OD Turning
I
Heat Treatment
I
Inspection
I
Measuring of Length and Weight
Marking
I
Rack Packing (Option)
I
Shipping
Optional Specification is available upon required
Hard Facing
Break-in
(Make & Break)
Cold Work
Internal Coating
Note) Green Pipes supplied from Japanese Seamless Manufacturers Sumitomo Metal Industries Ltd. and
Nippon Steel Co. shall be used as mother pipes.
Forged Tool Joint materials mainly made in Japan shall be used.
3
Upset
2-3/8 to 6-5/8
Friction Welding
API Q1, ISO-9001, API-Spec 5D, API-Spec 7-1, API Spec 5CT and latest API-Spec
5DP are Certified.
Specification
ISO 9001:2008
API Specification Q1
ISO/TS 29001
API-Spec 7-1
API Spec 5CT
API Spec 5DP
Registration Number
0709
Q1-0449
TS-0262
7-1-0574
5CT-0818
5DP-0081
IRP
PMC
PMC
5DP PSL3
Sour
SS-110
Mild
Sour
MS-120
Sour
PMC-110
Tensile Strength
Min
psi
(Mpa)
100,000
689
105,000
724
115,000
793
145,000 1,000
95,000
655
105,000
724
115,000
793
95,000
655
105,000
724
115,000
793
95,000
655
105,000
724
115,000
793
Tensile Strength
Min
Max
ksi(Mpa)
ksi(Mpa)
140,000
965
--
1,033 140,000
861 125,000
120,000 827
---
140,000
861 120,000
965
Elongation Hardness
Min
%
HB(HRC)
13Min 285
--
Drill Pipe
PMC
PMC
Sour
Tool Joint
API
PMC
PMC
Grade
E75
X95
G105
S135
E75
X95
G105
S135
MS75
SS75
MS95
SS95
MS105
SS105
5DP
(Spec7)
Tool Joint
Spec 7
Mild Sour
MS-120
Sour
PMC-110
--
--
--
Max
0.31
Max
0.38
Max
0.35
--
Max
1.00
Max
0.90
0.25/0.35
--
0.40/1.00
0.25/0.35
--
0.40/1.00
--
-Max
0.35
Max
0.35
Max
0.35
-Max
1.20
Max
1.20
Max
1.00
0.35/0.40
0.30/0.40
0.25/0.40
SSC
--
40(54) @-20
15 Max 32
66 (90)
965
15 Max 32
66 (90)
15 Max 32
66 (90)
--
827 140,000
965
Si
----85%SMYS
85%SMYS
85%SMYS
NA
NA
NA
85%SMYS
85%SMYS
85%SMYS
13 285 to 341
Impact
Value
ft-lbs(J)
40(54)
SSC
Max
Max
0.020
0.015
Max
0.015
Max
0.015
Max
0.015
Max
0.015
Max
0.020
Max
0.020
Max
0.020
Max
0.015
Max
0.08
Max
0.10
Max
0.10
Max
0.10
Max
0.015
Max
0.015
Max
0.010
Max
0.010
Mo
--
--
0.85/1.10
0.15/0.40
--
--
0.90/1.30
0.30/0.60
0.90/1.30
0.30/0.60
--
--
0.80/1.20
0.20/0.40
0.80/1.20
0.25/0.80
0.70/1.30
0.40/0.70
65%SMYS
NA
65%SMYS
10.40
9.50
13.30
15.50
0.362
0.254
0.368
0.449
9.19
6.45
9.35
11.40
IU
EU
A
A
IU
EU
IU
EU
IU
EU
IEU
A
A
A
A
A
A
A
A
NC31
PMDS NC31
NC38
PMDS NC38
A
A
NC38
PMDS NC38
A
A
NC38
NC40
PMDS NC38
PMDS NC40
A
A
NC40
NC46
PMDS NC40
PMDS NC46
NC46
NC50
NC50
NC46
4 1/2FH
NC50
NC46
4 1/2FH
PMDS NC46
PMDS NC50
PMDS NC50
4"
14.00
0.330
8.38
IU
EU
A
A
4-1/2"
13.75
0.271
6.88
16.60
0.337
8.56
IU
EU
EU
A
A
A
IEU
IU
EU
20.00
5"
16.25
19.50
0.430
0.296
0.362
10.92
7.52
9.19
IU
EU
IEU
25.60
0.500
12.70
PMDS NC46
NC50
PMDS NC50
5-1/2FH PMDS 55FH
IEU
NC50
PMDS NC50
5-1/2FH PMDS 55FH
A
A
A
A
21.90
24.70
0.361
0.415
9.17
10.54
IEU
IEU
5-7/8"
23.40
26.30
0.361
0.415
9.17
10.54
IEU
IEU
25.20
0.330
27.70
0.362
Note) A : Applicable
8.38
9.19
IEU
IEU
PMDS NC50
A
A
EU
5-1/2"
6-5/8"
PMDS NC46
PMDS-58HT
PMDS-58HT
A
A
A
A
in
2-3/8"
Nominal
Weight
lb/ft
Plain
End
Weight
Wall
ID
Thickness
Section
Polar
Area
Sectional
Pipe Body Modulas
Wall
ID
Thicknes s
lb/ft
in
in
mm
mm
sq.in
cu.in
4.43
0.190 1.995
4.83
50.67
1.3042
1.321
6.26
0.280 1.815
7.11
46.10
1.8429
1.733
X95
6,030
7,920
G105
6,670
8,750
S135
8,570
11,250
2.241
3.204
8,080 10,240
11,550 14,640
11,320
16,180
14,550
20,800
2.5902
3.6209
4.3037
3.923
5.144
5.847
14,150 17,920
18,550 23,500
21,090 26,710
19,800
25,970
29,520
25,460
33,390
37,950
88.29
84.84
82.30
3.0767
3.8048
4.3216
5.400
6.458
7.157
19,470 24,670
23,290 29,500
25,810 32,690
27,260
32,600
36,130
35,050
41,920
46,460
6.88
8.56
10.92
12.70
100.53
97.18
92.46
88.90
3.6005
4.4074
5.4981
6.2832
7.184
8.543
10.232
11.345
25,910
30,810
36,900
40,910
32,820
39,020
46,740
51,820
36,270
43,130
51,660
57,280
46,630
55,450
66,420
73,640
4.408
4.276
4.000
7.52
9.19
12.70
111.96
108.61
101.60
4.3743
5.2746
7.0686
9.718
11.415
14.491
35,040 44,390
41,170 52,140
52,260 66,190
49,060
57,630
73,160
63,080
74,100
94,060
4.892
4.778
4.670
7.72
9.17
10.54
124.26
121.36
118.62
4.9624
5.8282
6.6296
12.221
14.062
15.688
44,070 55,830
50,710 64,230
56,570 71,660
61,700
79,330
70,990
91,280
79,200 101,830
8.38
9.19
151.51
149.89
6.5262
7.1227
19.572
21.156
70,580 89,402
98,812 127,044
76,295 96,640 106,813 137,331
2.375
2.375
4.83
6.65
2-7/8"
2.875
2.875
6.85
10.40
6.16
9.72
0.217
0.362
2.441
2.151
5.51
9.19
62.00
54.64
1.8120
2.8579
3-1/2"
3.500
3.500
3.500
9.50
13.30
15.50
8.81
12.31
14.63
0.254
0.368
0.449
2.992
2.764
2.602
6.45
9.35
11.40
76.00
70.21
66.09
4"
4.000
4.000
4.000
11.85
14.00
15.70
10.46
12.93
14.69
0.262
0.330
0.380
3.476
3.340
3.240
6.65
8.38
9.65
4-1/2"
4.500
4.500
4.500
4.500
13.75
16.60
20.00
22.82
12.24
14.98
18.69
21.36
0.271
0.337
0.430
0.500
3.958
3.826
3.640
3.500
5"
5.000
5.000
5.000
16.25
19.50
25.60
14.87
17.93
24.03
0.296
0.362
0.500
5-1/2"
5.500
5.500
5.500
19.20
21.90
24.70
16.87
19.81
22.54
0.304
0.361
0.415
6-5/8"
6.625
25.20 22.19
0.330 5.965
6.625
27.70 24.22
0.362 5.901
Note) Data given in Table is based on API RP7G.
lb/ft = 3.3996 x A (col.6)
A = 0.7854 x (D2 - d2)
Z = 0.19635 (D4 - d4) / D
E75
4,760
6,250
Nominal
Weight
lb/ft
2.375
4.83
2.375
6.65
Tensile Strength
Collapse Pressure
Internal Pressure
lbs
psi
psi
E
X
G
S
E
X
G
S
E
X
G
S
97,820 123,900 13,940 176,070 11,040 13,980 15,460 19,030 10,500 13,300 14,700 18,900
138,210 175,070 193,500 248,790 15,600 19,760 21,840 28,080 15,470 19,600 21,660 27,850
2-7/8"
2.875
2.875
6.85
10.40
12,550
20,930
13,870 17,830
23,140 29,750
3-1/2"
3.500
3.500
3.500
9.50
13.30
15.50
12,070
17,480
21,300
13,340 17,150
19,320 24,840
23,570 30,310
4"
4.000
4.000
4.000
11.85
14.00
15.70
10,890
13,720
15,790
12,040 15,470
15,160 19,490
17,460 22,440
4-1/2"
4.500
4.500
4.500
4.500
13.75
16.60
20.00
22.82
270,030
330,560
412,360
471,240
10,280 7,900
16,770 9,830
23,330 12,540
26,670 14,580
10,010
12,450
15,890
18,470
11,070
13,760
17,560
20,420
5"
5.000
5.000
5.000
16.25
19.50
25.60
9,840
12,040
16,630
10,880 13,990
13,300 17,100
18,380 23,630
5-1/2"
5.500
5.500
5.500
19.20
21.90
24.70
7,250
8,610
9,900
9,190
10,910
12,540
6-5/8"
6.625
25.20 489,460 619,990 685,250 881,040
6.625
27.70 534,200 676,650 747,880 961,560
Note) Data given in Table is based on API RP7G.
6,540
7,170
8,280
9,080
10,160 13,060
12,060 15,510
13,860 17,830
\
9,150 11,770
10,040 12,910
342,040
418,710
522,320
596,900
378,050
462,780
577,300
659,730
4,790
5,890
5,320
6,760
5,500
7,100
6,040
7,810
14,230
17,690
22,580
26,250
Pipe Body
Size
OD
Nominal
Weight
OD
in
lb/ft
Calculated Weight
Wall
Thickness
ID
Plain
End
OD
Upset +1/8
-1/32
Upset Dimension
ID
1/16
Length of
Internal
Upset
+1 1/2 -1/2
in
in
mm
in
lb/ft
lb
in
in
in
D
t
d
wpe
ew
Dou
dou
Internal Upset ( IU ) Drill Pipe
2-7/8"
10.40 2.875 0.362
9.19 2.151
9.72
3.20 2.875
1 5/16
3-1/2"
9.50 3.500 0.254
6.45 2.992
8.81
4.40 3.500
2 1/4
3-1/2"
13.30 3.500 0.368
9.35 2.764 12.31
4.40 3.500 1 15/16
3-1/2"
15.50 3.500 0.449 11.40 2.602 14.63
3.40 3.500 1 15/16
4"
11.85 4.000 0.262
6.65 3.476 10.46
4.20 4.000 2 15/16
4"
14.00 4.000 0.330
8.38 3.340 12.93
4.60 4.000
2 3/4
4-1/2"
13.75 4.500 0.271
6.88 3.958 12.24
5.20 4.500
3 3/8
5"
16.25 5.000 0.296
7.52 4.408 14.87
6.60 5.000
3 3/4
External Upset ( EU ) Drill Pipe
2-3/8"
6.65 2.375 0.280
2-7/8"
10.40 2.875 0.362
3-1/2"
9.50 3.500 0.254
3-1/2"
13.30 3.500 0.368
3-1/2"
15.50 3.500 0.449
4"
11.85 4.000 0.262
4"
14.00 4.000 0.330
4-1/2"
13.75 4.500 0.271
4-1/2"
16.60 4.500 0.337
4-1/2"
20.00 4.500 0.430
7.11
9.19
6.45
9.35
11.40
6.65
8.38
6.88
8.56
10.92
1.815
2.151
2.992
2.764
2.602
3.476
3.340
3.958
3.826
3.640
6.26
9.72
8.81
12.31
14.63
10.46
12.93
12.24
14.98
18.69
1.80
2.40
2.60
4.00
2.80
5.01
5.01
5.61
5.61
5.61
2.656
3.219
3.938
3.938
3.938
4.500
4.563
5.063
5.063
5.063
1.815
2.151
2.992
2.602
2.602
3.476
3.340
3.958
3.826
3.640
3.826
3.640
4.276
4.000
4.778
4.670
5.965
5.901
14.98
18.69
17.93
24.03
19.81
22.54
22.19
24.21
8.10
8.60
8.60
7.80
10.60
9.01
25.90
24.03
5.063
5.063
5.188
5.188
5.750
5.750
7.000
7.000
3 5/32
3
3 11/16
3 7/16
4
4
5 5/16
5 5/16
Liu
Length of
Internal
Taper
min
Length of
External
Taper
min
in
Miu
in
Leu
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
1 3/4
---2 1/4
------2 1/2
2 1/4
2 1/4
2 1/4
2 1/4
2 1/4
4 1/2
4 1/2
1 1/2
-1 1/2
1 1/2
-2
---
Length of External
Taper
min
max
in
---------
---2
-------
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
2
2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
3
3
in
meu
--------1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1
1
1
1
1
1
---
in max
Leu + meu
---------
---------
----------1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
---
Figure
Length End
of Pipe
to Taper
Fade Out
4
4
4
4
4
4
4
4
4
4
------5 1/2
5 1/2
Upset Drill Pipe Dimensions and Weights (Group 3 X95 G105 S135)
Dim ension
Size
OD
Nominal
Weight
in
lb/ft
Pipe Body
OD
Calculated Weight
Wall
Thickness
ID
Plain
End
Upset
OD
+1/8
-1/32
Length of
Internal
Upset
+1 1/2 -1/2
in
in
mm
in
lb/ft
lb
in
in
in
D
t
d
wpe
ew
Dou
dou
Liu
Internal Upset ( IU ) Drill Pipe
2-7/8"
10.40 2.875 0.362
9.19 2.151
9.72
5.10 2.875
1 5/16
3 1/2
3-1/2"
13.30 3.500 0.368
9.35 2.764 12.31
7.41 3.500 1 15/16
3 1/2
4"
14.00 4.000 0.330
8.38 3.340 12.93
8.81 4.000
2 5/8
3 1/2
5"
16.25 5.000 0.296
7.52 4.408 14.87 13.61 5.000
3 9/16
3 1/2
External Upset ( EU ) Drill Pipe
2-3/8"
6.65 2.375 0.280
2-7/8"
10.40 2.875 0.362
3-1/2"
13.30 3.500 0.368
3-1/2"
15.50 3.500 0.449
4"
14.00 4.000 0.330
4-1/2"
16.60 4.500 0.337
4-1/2"
20.00 4.500 0.430
5"
19.50 5.000 0.362
5"
25.60 5.000 0.500
Length of
Internal
Taper min
Length of
External
Upset min
Length End
of Pipe to
Taper
Fadeout
Max
in
m iu
in
Leu
in
Leu + m eu
-----
-----
-----
7.11
9.19
9.35
11.40
8.38
8.56
10.92
9.19
12.70
1.815
2.151
2.764
2.602
3.340
3.826
3.640
4.276
4.000
6.26
9.72
12.31
14.63
12.93
14.98
18.69
17.93
24.03
4.60
6.21
10.21
8.21
14.42
17.22
16.02
21.62
21.22
2.656
3.250
4.000
4.000
4.625
5.188
5.188
5.750
5.875
1 9/16
1 15/16
2 1/2
2 1/2
3 1/16
3 9/16
3 7/16
3 15/16
3 13/16
4
4
4
4
4
4
4
4
4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
----------
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
2.602
3.826
3.640
4.276
4.000
4.778
4.670
5.965
5.901
14.64
15.00
18.71
17.95
24.05
19.83
22.56
22.21
24.24
11.01
8.71
17.62
16.82
15.42
21.02
18.42
25.90
24.03
3.781
4.750
4.781
5.188
5.188
5.750
5.750
7.000
7.000
1 15/16
2 7/8
2 13/16
3 9/16
3 5/16
3 13/16
3 13/16
5.315
5.315
4
2
4
4
4
4
4
4
4
1/4
1/2
1/4
1/4
1/4
1/4
1/4
1/2
1/2
-4
4
4
4
4
4
4
4
3
1 1/2
3
3
3
3
3
3
3
5 1/2
3
5 1/2
5 1/2
5 1/2
5 1/2
5 1/2
5 1/2
5 1/2
10
Torsional Torque
120,000
Torque (ft-lbs)
100,000
API
PMDS
Torsional Yield
(ft-lbs)
Mak-up Torque
(ft-lbs)
80,000
60,000
40,000
20,000
0
NC38
NC46
Connections
11
NC50
5-1/2FH
API NC50
PMDS NC50
( 6-5/8"OD 3-1/2"ID)
44,460
58,900
26,700
38,300
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
2-5/16" Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
2-7/16" Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
2-9/16" Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
5"
34,700
862,000
22,600
31,200
780,000
20,300
28,600
722,000
18,600
25,900
661,000
16,800
4-7/8"
34,500
862,000
22,400
31,000
780,000
20,200
28,400
722,000
18,500
25,700
661,000
16,700
PMDS-NC46
ID
DATA
2-1/4"
2-1/2"
2-3/4"
3"
3-1/4"
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
3-1/4"
3-1/2"
3-3/4"
4"
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs )
6-1/4"
71,500
1,460,000
46,500
65,700
1,343,000
42,700
59,100
1,214,000
38,400
51,600
1,073,000
33,500
43,400
920,000
28,200
6-1/8"
71,200
1,460,000
46,300
65,400
1,343,000
42,500
58,800
1,214,000
38,200
51,400
1,073,000
33,400
43,200
920,000
28,100
6"
70,900
1,460,000
46,100
65,100
1,343,000
42,300
58,500
1,214,000
38,000
51,100
1,073,000
33,200
43,000
920,000
28,000
4-1/4"
12
Torque(ft-lbs )
Tension(lbs)
Make-up(ft-lbs )
Torque(ft-lbs )
Tension(lbs)
Make-up(ft-lbs )
4-5/8"
34,100
862,000
22,200
30,600
780,000
19,900
28,100
722,000
18,300
25,400
661,000
16,500
7-1/4"
106,900
1,983,000
69,500
105,200
1,829,000
68,400
96,100
1,664,000
62,500
84,900
1,486,000
55,200
72,700
1,296,000
47,300
7-1/8"
97,700
1,983,000
63,500
96,000
1,829,000
62,400
94,100
1,664,000
61,200
84,600
1,486,000
55,000
72,400
1,296,000
47,100
7"
88,800
1,983,000
57,700
87,100
1,829,000
56,600
85,100
1,664,000
55,300
82,800
1,486,000
53,800
72,100
1,296,000
46,900
7-1/2"
93,300
1,577,000
60,600
79,800
1,375,000
51,900
7-1/4"
92,600
1,577,000
60,200
79,200
1,375,000
51,500
OD
7-1/8"
92,300
1,577,000
60,000
78,900
1,375,000
51,300
5-1/2"
38,900
918,000
25,300
36,100
857,000
23,500
33,100
792,000
21,500
29,800
725,000
19,400
5-3/8"
38,700
918,000
25,200
35,900
857,000
23,300
32,900
792,000
21,400
29,700
725,000
19,300
OD
5-1/4"
38,500
918,000
25,000
35,700
857,000
23,200
32,700
792,000
21,300
29,500
725,000
19,200
5-1/8"
38,300
918,000
24,900
35,500
857,000
23,100
32,500
792,000
21,100
29,300
725,000
19,000
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
6-5/8"
85,000
1,596,000
55,300
77,200
1,454,000
50,200
68,500
1,301,000
44,500
58,900
1,136,000
38,300
48,500
958,000
31,500
6-1/2"
84,600
1,596,000
55,000
76,800
1,454,000
49,900
68,200
1,301,000
44,300
58,700
1,136,000
38,200
48,200
958,000
31,300
OD
6-3/8"
84,300
1,596,000
54,800
76,500
1,454,000
49,700
67,900
1,301,000
44,100
58,400
1,136,000
38,000
48,000
958,000
31,200
6-1/4"
83,900
1,596,000
54,500
76,200
1,454,000
49,500
67,600
1,301,000
43,900
58,100
1,136,000
37,800
47,800
958,000
31,100
Equivalent Connections
Num ber
Connection
NC26
NC31
NC38
NC40
NC46
NC50
Equivalent
Connection
2-3/8 IF
2-7/8 IF
3-1/2 IF
4 FH
4 IF
4-1/2 IF
2-7/16" Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
2-9/16" Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
2-11/16"Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
2-13/16"Torque(ft-lbs )
Tens ion(lbs )
Make-up(ft-lbs)
PMDS-NC50
ID
DATA
5-7/8"
70,500
1,460,000
45,800
64,800
1,343,000
42,100
58,200
1,214,000
37,800
50,900
1,073,000
33,100
42,800
920,000
27,800
OD
PMDS-58HT
ID
DATA
4"
PMDS-NC40
ID
DATA
OD
PMDS-55FH
ID
DATA
3"
OD
4-3/4"
34,300
862,000
22,300
30,800
780,000
20,000
28,300
722,000
18,400
25,600
661,000
16,600
6-7/8"
80,100
1,983,000
52,100
78,400
1,829,000
51,000
76,400
1,664,000
49,700
74,100
1,486,000
48,200
71,400
1,296,000
46,400
7"
91,900
1,577,000
59,700
78,500
1,375,000
51,000
2-3/4"
3"
3-1/4"
3-1/2"
3-3/4"
Note)
Com bination OD and ID of Tool Joint not in Table is available upon
reques t.
GRADE
Tool Joint
Connection
E75
X95
G105
*NC26(2 3/8IF)
*NC26(2 3/8IF)
*NC26(2 3/8IF)
OD
ID
in
(m m )
3 3/8
(85.7)
1 3/4
3 3/8
(85.7)
1 3/4
3 3/8
(85.7)
1 3/4
(44.5)
(44.5)
(44.5)
2 7/8
(73.0)
10.40
0.362
(9.19)
2.151
(54.6) EU
EU
EU
EU
E75
X95
G105
S135
*NC31(2
*NC31(2
*NC31(2
*NC31(2
7/8IF)
7/8IF)
7/8IF)
7/8IF)
4
4
4
4
1/8
1/8
1/8
3/8
(104.8)
(104.8)
(104.8)
(111.1)
2 1/8
2
2
1 5/8
(54.0)
(50.8)
(50.8)
(41.3)
3 1/2
3 1/2
(88.9)
9.50
13.30
0.254
0.368
(6.45)
(9.35)
2.992
2.764
(76.0) EU
(70.2) EU
EU
EU
EU
EU
EU
EU
EU
EU
EU
(66.1) EU
EU
EU
EU
EU
EU
EU
EU
EU
EU
EU
EU
EU
E75
E75
E75
X95
G105
G105
G105
G105
S135
S135
S135
E75
E75
E75
X95
X95
X95
X95
G105
G105
G105
G105
G105
S135
*NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
NC38(3 1/2IF)
*NC38(3 1/2IF)
NC38(3 1/2IF)
*NC40( 4 FH)
4
4
4
5
4
4
5
5
4
5
5
4
4
5
4
4
5
5
4
5
5
5
5
5
3/4
3/4
3/4
1/2
(120.7)
(120.7)
(120.7)
(127.0)
(120.7)
(120.7)
(127.0)
(127.0)
(120.7)
(127.0)
(127.0)
(120.7)
(120.7)
(127.0)
(120.7)
(120.7)
(127.0)
(127.0)
(120.7)
(127.0)
(127.0)
(127.0)
(127.0)
(139.7)
2 11/16
2 11/16
2 9/16
2 9/16
2 11/16
2 9/16
2 11/16
2 7/16
2 9/16
2 7/16
2 1/8
2 11/16
2 9/16
2 9/16
2 11/16
2 9/16
2 9/16
2 7/16
2 11/16
2 9/16
2 7/16
2 1/8
2 7/16
2 1/4
(68.3)
(68.3)
(65.1)
(65.1)
(68.3)
(65.1)
(68.3)
(61.9)
(65.1)
(61.9)
(54.0)
(68.3)
(65.1)
(65.1)
(68.3)
(65.1)
(65.1)
(61.9)
(68.3)
(65.1)
(61.9)
(54.0)
(61.9)
(57.2)
(84.8) IU
IU
IU
IU
IU
E75
X95
G105
G105
S135
*NC40( 4 FH)
*NC40( 4 FH)
NC40( 4 FH)
*NC40( 4 FH)
*NC40( 4 FH)
5
5
5
5
5
1/4
1/4
1/4
1/2
1/2
(133.4)
(133.4)
(133.4)
(139.7)
(139.7)
2 13/16
2 11/16
2 7/16
2 7/16
2 7/16
(71.4)
(68.3)
(61.9)
(61.9)
(61.9)
EU
EU
EU
EU
E75
X95
G105
S135
*NC46( 4
*NC46( 4
*NC46( 4
*NC46( 4
6
6
6
6
(152.4)
(152.4)
(152.4)
(152.4)
3 1/4
3 1/4
3 1/4
3
(82.6)
(82.6)
(82.6)
(76.2)
(100.5) IU
(97.2) IEU
IEU
IEU
IEU
IEU
IEU
IEU
IEU
(92.5) IEU
IEU
IEU
IEU
IEU
IEU
(100.5) EU
(97.2) EU
EU
EU
EU
EU
E75
E75
E75
X95
X95
G105
G105
S135
S135
E75
X95
X95
G105
G105
S135
E75
E75
X95
G105
S135
S135
*NC46( 4 IF)
*NC46( 4 IF)
NC46( 4 IF)
NC46( 4 IF)
*NC46( 4 IF)
NC46( 4 IF)
*NC46( 4 IF)
NC46( 4 IF)
*NC46( 4 IF)
*NC46( 4 IF)
NC46( 4 IF)
*NC46( 4 IF)
NC46( 4 IF)
*NC46( 4 IF)
*NC46( 4 IF)
NC50( 4 1/2 IF)
*NC50( 4 1/2 IF)
*NC50( 4 1/2 IF)
*NC50( 4 1/2 IF)
NC50( 4 1/2 IF)
*NC50( 4 1/2 IF)
(152.4)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(158.8)
(168.3)
(168.3)
(168.3)
(168.3)
(168.3)
(168.3)
3
3
3
3
3
3
3
3
2
3
3
2
3
2
2
3
3
3
3
3
3
(85.7)
(82.6)
(76.2)
(82.6)
(76.2)
(82.6)
(76.2)
(76.2)
(69.9)
(76.2)
(76.2)
(69.9)
(76.2)
(63.5)
(57.2)
(98.4)
(95.3)
(95.3)
(95.3)
(82.6)
(88.9)
3 1/2
4
(101.6)
4 1/2
4 1/2
(114.3)
4 1/2
(114.3)
4 1/2
4 1/2
(114.3)
15.50
14.00
13.75
16.60
20.00
13.75
16.60
0.449
0.330
0.271
0.337
(11.4)
(8.38)
(6.88)
(8.56)
0.430 (10.92)
0.271
0.337
(6.88)
(8.56)
2.602
3.340
3.958
3.826
3.640
3.958
3.826
13
UPSET
STYLE
(46.1) EU
EU
EU
IF)
IF)
IF)
IF)
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/8
5/8
5/8
5/8
5/8
5/8
3/8
1/4
1/4
1/4
3/4
3/4
1/2
1/4
7/8
3/4
3/4
3/4
1/4
1/2
Drill Pipe
Wall Thickness
in (m m )
ID
in (m m )
UPSET
STYLE
GRADE
Tool Joint
Connection
ID
(m m )
4 1/2
(114.3)
20.00
0.430 (10.92)
3.640
(92.5) EU
EU
EU
EU
E75
X95
G105
S135
*NC50( 4
*NC50( 4
*NC50( 4
*NC50( 4
IF)
IF)
IF)
IF)
6
6
6
6
5/8
5/8
5/8
5/8
(168.3)
(168.3)
(168.3)
(168.3)
3 5/8
3 1/2
3 1/2
3
(92.1)
(88.9)
(88.9)
(76.2)
5
(127.0)
19.50
0.362
4.276
(108.6) IEU
IEU
IEU
IEU
IEU
IEU
IEU
IEU
IEU
IEU
IEU
E75
E75
X95
X95
X95
G105
G105
G105
S135
S135
S135
6
6
6
6
6
6
6
6
6
6
6
5/8
3/8
3/8
5/8
1/2
3/8
3/8
5/8
3/8
1/2
5/8
(168.3)
(161.9)
(161.9)
(168.3)
(165.1)
(161.9)
(161.9)
(168.3)
(161.9)
(165.1)
(168.3)
3
3
3
3
3
3
3
3
3
3
2
3/4
(95.3)
(88.9)
(95.3)
(88.9)
(88.9)
(95.3)
(88.9)
(82.6)
(82.6)
(76.2)
(69.9)
(9.19)
1/2
1/2
1/2
1/2
OD
in
3/4
1/2
3/4
1/2
1/2
3/4
1/2
1/4
1/4
5
(127.0)
25.60
0.500
(12.7)
4.000
(101.6) IEU
IEU
IEU
E75
X95
G105
6 5/8
6 3/8
6 3/8
(168.3)
(161.9)
(161.9)
3 1/2
3
2 3/4
(88.9)
(76.2)
(69.9)
5
(127.0)
19.50
0.362
(9.19)
4.276
(108.6) IEU
IEU
IEU
IEU
E75
X95
G105
S135
*5
*5
*5
*5
1/2FH
1/2FH
1/2FH
1/2FH
7
7
7
7 1/4
(177.8)
(177.8)
(177.8)
(184.2)
3
3
3
3
3/4
3/4
3/4
1/4
(95.3)
(95.3)
(95.3)
(82.6)
5 1/2
(139.7)
21.90
0.361
(9.17)
4.778
(121.4) IEU
IEU
IEU
IEU
(118.6) IEU
IEU
IEU
IEU
E75
X95
G105
S135
E75
X95
G105
S135
*5
*5
*5
*5
*5
*5
*5
*5
1/2FH
1/2FH
1/2FH
1/2FH
1/2FH
1/2FH
1/2FH
1/2FH
7
7
7
7
7
7
7
7
(177.8)
(177.8)
(184.2)
(190.5)
(177.8)
(184.2)
(184.2)
(190.5)
4
3
3
3
4
3
3
3
(101.6)
(95.3)
(88.9)
(76.2)
(101.6)
1/2 (88.9)
1/2 (88.9)
(76.2)
(151.5) IEU
IEU
IEU
IEU
(149.9) IEU
IEU
IEU
IEU
E75
X95
G105
S135
E75
X95
G105
S135
*6
*6
*6
*6
*6
*6
*6
*6
5/8FH
5/8FH
5/8FH
5/8FH
5/8FH
5/8FH
5/8FH
5/8FH
8
8
8
8
8
8
8
8
(203.2)
(203.2)
(209.6)
(215.9)
(203.2)
(209.6)
(209.6)
(215.9)
5
5
4
4
5
4
4
4
(127.0)
(127.0)
(120.7)
(108.0)
(127.0)
(120.7)
(120.7)
(108.0)
5 1/2
(139.7)
24.70
6 5/8
(168.3)
25.20
6 5/8
(168.3)
27.20
0.415 (10.54)
0.330
0.362
(8.38)
(9.19)
4.670
5.965
5.901
14
1/4
1/2
1/4
1/4
1/2
1/4
1/2
1/4
1/4
1/2
3/4
1/2
3/4
1/4
3/4
3/4
1/4
Tool Joint Dimensions for Grades E75, X95, G105, and S135 Drill Pipe
1
Drill Pipe
Tool
Joint
Designations
SIZE
Nominal
Weight
in
D
Grade
lb/ft
OD
of Pin
& Box
ID of
Pin
in
D
in
d
Bevel
Dia.
of Pin
& Box
in
DF
Total
Length
TJ Pin
in
LP
NC26(2 3/8IF)
2 3/8 EU
6.65
E75
X95
G105
3 3/8
3 3/8
3 3/8
1 3/4
1 3/4
1 3/4
3 17/64
3 17/64
3 17/64
NC31(2 7/8IF)
2 7/8 EU
10.40
E75
X95
G105
S135
4
4
4
4
2 1/8
2
2
1 5/8
3 61/64
3 61/64
3 61/64
3 61/64
10
10
10
10
NC38(3 1/2IF)
3 1/2 EU
9.50
E75
4 3/4
NC38(3 1/2IF)
3 1/2 EU
13.30
3 1/2 EU
15.50
E75
X95
G105
S135
E75
X95
G105
4 3/4
5
5
5
5
5
5
2 11/16
2 9/16
2 7/16
2 1/8
2 9/16
2 7/16
2 1/8
3 1/2 EU
4 EU
15.50
14.00
S135
E75
X95
G105
S135
5
5
5
5
5
2 1/4
2 13/16
2 11/16
2 7/16
2
4 EU
14.00
4 1/2 IU
4 1/2 IEU
13.75
16.60
4 1/2 IEU
20.00
E75
X95
G105
S135
E75
E75
X95
G105
S135
E75
X95
G105
S135
6
6
6
6
6
6
6
6
6
6
6
6
6
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
4 1/2 EU
4 1/2 EU
13.75
16.60
4 1/2 EU
20.00
IEU
19.50
IEU
25.60
E75
E75
X95
G105
S135
E75
X95
G105
S135
E75
X95
G105
S135
E75
X95
G105
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
NC40(4FH)
NC46(4IF)
NC50(41/2IF)
15
10
11
12
13
14
Tool Joint
1/8
1/8
1/8
3/8
1/2
1/4
1/4
1/2
1/2
Pin
Tong
Space
Box
Tong
Space
in
LPB
Combined
Length
of Pin
& Box
in
L
in
LB
Dia. Of
Pin at
Elevator
Upset
in
DPE
Dia. Of
Box at
Elevator
Upset
in
DTE
Torsional
Ratio Pin
to
Drill Pipe
10
10
10
7
7
7
8
8
8
15
15
15
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
2 9/16
1.10
0.87
0.79
1/2
1/2
1/2
1/2
7
7
7
7
9
9
9
9
16
16
16
16
3
3
3
3
3
3
3
3
1.03
0.90
0.82
0.82
4 37/64
11 1/2
10 1/2
18 1/2
3 7/8
3 7/8
0.91
4 37/64
4 37/64
4 37/64
4 37/64
4 37/64
4 37/64
4 37/64
12
12
12
12
12
12
12
8
8
8
8
8
8
8
10
10
10
10
10
10
10
18 1/2
18 1/2
18 1/2
18 1/2
18 1/2
18 1/2
18 1/2
3
3
3
3
3
3
3
7/8
7/8
7/8
7/8
7/8
7/8
7/8
3
3
3
3
3
3
3
7/8
7/8
7/8
7/8
7/8
7/8
7/8
0.98
0.87
0.86
0.80
0.97
0.83
0.90
5
5
5
5
5
1/64
1/64
1/64
1/64
1/64
11
11
11
11
11
1/2
1/2
1/2
1/2
1/2
7
7
7
7
7
10
10
10
10
10
17
17
17
17
17
3
4
4
4
4
7/8
3/16
3/16
3/16
3/16
3
4
4
4
4
7/8
3/16
3/16
3/16
3/16
0.87
1.01
0.86
0.93
0.87
3 3/8
3 1/4
3
3
2 3/4
3
2 3/4
2 2/4
2 1/4
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
5 23/32
11
11
11
11
11
11
11
11
11
11
11
11
11
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7
7
7
7
7
7
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
10
10
10
17
17
17
17
17
17
17
17
17
17
17
17
17
4
4
4
4
4
4
4
4
4
4
4
4
4
1/2
1/2
1/2
1/2
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
4 1/2
4 1/2
4 1/2
4 1/2
4 11/16
4 11/16
4 11/16
4 11/16
4 11/16
4 11/16
4 11/16
4 11/16
4 11/16
1.43
1.13
1.02
0.94
1.20
1.09
1.01
0.91
0.81
1.07
0.96
0.96
0.81
3 7/8
3 6/8
3 6/8
3 6/8
3 1/2
3 5/8
3 1/2
3 1/2
3
3 3/4
3 1/2
3 1/2
2 3/4
3 1/2
3
2 3/4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1.23
1.23
0.97
0.88
0.81
1.02
0.96
0.86
0.87
0.92
0.86
0.89
0.86
0.86
0.86
0.87
3 1/4
3 1/4
3 1/4
3
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/8
1/8
1/8
1/8
1/8
1/8
1/8
Tool Joint Dimensions for Grades E75, X95, G105, and S135 Drill Pipe (Continued)
1
Drill Pipe
Tool
Joint
Designations
SIZE
Nominal
Weight
in
D
5 1/2 FH
IEU
19.50
IEU
25.60
5 1/2 IEU
5 1/2 IEU
6 5/8 FH
Grade
lb/f t
6 5/8 IEU
6 5/8 IEU
21.90
24.70
25.20
27.70
10
11
12
13
14
Tool Joint
OD
of Pin
& Box
ID of
Pin
Bevel
Dia.
of Pin
& Box
in
DF
Total
Length
TJ Pin
Box
Tong
Space
Dia. Of
Box at
Elevator
Upset
in
DTE
Torsional
Ratio Pin
to
Drill Pipe
E75
X95
G105
S135
E75
X95
G105
S135
E75
X95
G105
S135
E75
X95
G105
S135
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
3 3/4
3 3/4
3 3/4
3 1/2
3 1/2
3 1/2
3 1/2
3 1/4
4
3 3/4
3 1/2
3
4
3 1/2
3 1/2
3
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
6 23/32
7 3/32
6 23/32
6 23/32
6 23/32
7 3/32
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
5 1/8
5 1/8
5 1/8
5 1/8
5 1/8
5 1/8
5 1/8
5 1/8
5 11/16
5 11/16
5 11/16
5 11/16
5 11/16
5 11/16
5 11/16
5 11/16
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
11/16
1.53
1.21
1.09
0.98
1.21
0.95
0.99
0.83
1.11
0.98
1.02
0.96
0.99
1.01
0.92
0.86
E75
X95
G105
S135
E75
X95
G105
S135
8
8
8
8
8
8
8
8
5
5
4 3/4
4 1/4
5
4 3/4
4 3/4
4 1/4
7 45/64
7 45/64
7 45/64
7 45/64
7 45/64
7 45/64
7 45/64
7 45/64
13
13
13
13
13
13
13
13
8
8
8
8
8
8
8
8
11
11
11
11
11
11
11
11
19
19
19
19
19
19
19
19
6 15/16
6 15/16
6 15/16
6 15/16
6 15/16
6 15/16
6 15/16
6 15/16
6
6
6
6
6
6
6
6
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
1.04
0.82
0.87
0.86
0.96
0.89
0.81
0.80
1/4
1/2
1/4
1/4
1/2
1/4
1/2
1/4
1/4
1/2
in
LB
Dia. Of
Pin at
Elevator
Upset
in
DPE
in
d
1/4
1/4
in
LPB
Combined
Length
of Pin
& Box
in
L
in
D
1/4
in
LP
Pin
Tong
Space
Notes:
1. See Figure.
2. All dimensions are in inches.
3. Neck diameters (DPE and DT E ) and inside diameters (d) of tool joints prior to w elding are at manufacturer's option. The above table specifies
dimensions after f inal machining of the assembly.
4. Appendix I contains dimensions of obsolescent connections and for square elevator shoulders.
a The tool joint designation indicates the size and style of the applicable connection.
b Nominal w eights, threads and couplings are show n for the purpose of identif ication in ordering.
c The inside diameter does not apply to box members, w hich are optional w ith the manuf acturer.
d Length of pin thread reduced to 3 1/2 inches ( 1/2 inch short) to accommodate 3 inch ID.
16
Thread
Form
Taper,
Inches
Per
Foot
on
Diameter
Threads
Per
Inch
Pitch
Diameter
of Thread
at Gauge
Point
NC26
NC31
NC38
NC40
NC46
NC50
V-0.038R
V-0.038R
V-0.038R
V-0.038R
V-0.038R
V-0.038R
4
4
4
4
4
4
2
2
2
2
2
2
2 3/8 REG
2 7/8 REG
3 1/2 REG
4 1/2 REG
5 1/2 REG
6 5/8 REG
V-0.040
V-0.040
V-0.040
V-0.040
V-0.050
V-0.050
5
5
5
5
4
4
3
3
3
3
3
2
5 1/2 FH
V-0.050
Equivalent Connections
Number Connection
NC26
NC31
NC38
NC40
NC46
NC50
17
6
Large
Diameter
of Pin
7
Diameter
of Flat
on Pin
1/64
C
DL
Number (NC) Style
2.66800
2.876
3.18300
3.391
3.80800
4.016
4.07200
4.280
4.62600
4.834
5.04170
5.250
Regular (REG) Style
2.36537
2.625
2.74037
3.000
3.23987
3.500
4.36487
4.625
5.23402
5.520
5.75780
5.992
Full-Hole (FH) Style
5.59100
5.825
Equivalent Connection
2-3/8 IF
2-7/8 IF
3-1/2 IF
4 FH
4 IF
4-1/2 IF
8
Small
Diameter
of Pin
9
Length
of Pin
+0
1/8
10
Minimum
Length
of Box
Threads
Depth
of Box
+3/8
0
L BC
12
Box
Counterbore
+1/32
1/64
DLF
Ds
L PC
2.750
3.266
3.891
4.156
4.709
5.135
2.376
2.808
3.349
3.530
4.084
4.500
3
3 1/2
4
4 1/2
4 1/2
4 1/2
3 1/8
3 5/8
4 1/8
4 5/8
4 5/8
4 5/8
3 5/8
4 1/8
4 5/8
3 1/8
5 1/8
5 1/8
2 15/16
3 29/64
4 15/64
4 11/32
4 29/32
5 5/16
2.515
2.890
3.390
4.515
5.410
5.882
1.875
2.125
2.562
3.562
4.333
5.159
3
3 1/2
3 3/4
4 1/4
4 3/4
5
3 1/8
3 5/8
3 7/8
4 3/8
4 7/8
5 1/8
3 5/8
4 1/8
4 3/8
4 7/8
5 3/8
5 5/8
2 11/16
3 1/16
3 9/16
4 11/16
5 37/64
6 1/16
4.992
5 1/8
5 5/8
5 29/32
--
LBT
11
Qc
Thread
Form
Pitch
p
V
V
V
V
V
0.038R
0.038R
0.040
0.050
0.050
Taper
in./ft
0.250000
0.250000
0.250000
0.250000
0.250000
2
3
3
3
2
Reference
Thread
Reference
Height
Reference
Root
Ref erence
Not
Thread
Truncation
Crest
Truncated Truncated
srn = srs Truncation
H
hn = hs
frn = frs
fcn = fcs
0.216005
0.121844
0.038000
0.056161
0.215379
0.121381
0.038000
0.055998
0.172303
0.117842
0.020000
0.034461
0.215379
0.147303
0.025000
0.043076
0.216005
0.147804
0.025000
0.043201
18
8
9
Widhth of Flat
Crest
F cn
= F cs
0.065
0.065
0.040
0.050
0.050
Root
F rn
= F rs
------
10
11
Root
Radius
rrn = rrs
0.038
0.038
0.020
0.025
0.025
Radius at
Thread
Corners
Form
r
0.008
0.015
0.015
0.015
0.015
0.015
Optional Specification
Optional specification can be applied upon the request of purchasing order specification.
HB, Break-in, Internal coating and others are available at PMC group facilities or outside facilities.
HB (Hard Banding)
ARNCO 100XT, ARNCO 200XT, ARNCO300XT and others hard banding are available upon request.
Break-in (Make and Break)
Make and break specification are available upon required.
PMC Standard Make and Break procedure is that three times Make and break shall be applied with
optimum torque or less.
Internal Coating
Internal Coasting also are available upon purchasing specification. Internal coating TK34 (TuboScope) or
others shall be applied at qualified internal coating plants.
Cold work (Cold Rolling)
Cold work operations are available upon the purchasing specification, which apply cold work on the root
thread of Tool Joint Connections after threading.
PMDS Technical and Repair Services
Technical services concerned with drill pipes and PMDS Double Shoulder connection are available
anytime upon request.
Repair technical services for PMDS (Double Shoulder) can be available at anywhere upon required.
APPENDIX Equation and Formula
(1)Pipe body yield strength
2 2
Py = 0.7854 x (D -d ) x YS
Py : Pipe Body Yield Strength( kips)
YS :Minimum Specified Yield Strength(psi)
D: Outside Diameter(,inches) d:Internal Diameter(inches)
(2).MIYP(Minimum Internal Yield Pressure or Burst Pressure
Minimum Internal Yield Pressure(MIYP)
P = 0.875 x 2 x YS x t / D
YS :Minimum Specified Yield Strength(psi)
D: Outside Diameter(,inches) t:Wall thickness
(3) Collapse
API BUL 5C3 Formula and Equation
Conversion Formula
Length, Square, Pressure, Stress, Weight
1 inch(in)=25.4mm
1 square inch(sq.in.)=645.16 sq.mm
1 foot(ft)=0.3048mm
1 pound(lb)=0.454 Kg
1Kgf=9.80665N
-2
1Kgf/Cm2=9.80665*10 MPa
2
1psi(pound per square inch=0.0703 Kg/Cm =0.006895 Megapascals (MPa)
1 Kg-M=0.138 ft-lbs 1 pound per foot(lb/ft)=1.4895 Kg/m
1 foot-pound(ft-lbs)=1.355818 Joules(J) for impact energy
=1.355818 (N-m) for torque
1 Ksi=0.703 Kg/mm2
1 psi=0.0703 Kg/Cm2
Temperature
Temperature conversion table
SI Unit
Length
Time
Load
(NewtonN(kg-m/s2)
Pressure Stress(Pascal
kgf/mm2(=9.80665MPa)bar(=105Pa=0.1MPa)Torr(=133.32Pa)atm(=101325Pa)
1.2x10 /
-5
6.6x10 /F
PetroMaterials Corporation
Head Office
1-3-2 Iidabashi, Chiyoda-ku Tokyo 102-0072, Japan
Tel:81-3-3237-1001
Fax:81-3-3237-8551
E-Mail : info@petromaterials.com
Wakayama Works
2021-8 Saikazaki, Wakayama-shi, Wakayama 641-0062, Japan
Tel:81-73-498-8820
Fax:81-73-446-8370
E-Mail : office@petromaterials.com
PetroMaterials Group
PetroMaterials USA, INC
1330 Post Oak Blvd Suite 1888, Houston TX 77056, USA
Tel:1-713-871-8860
Fax:1-713-871-8865
EiMail : us@petromaterials.com
PetroMaterials(Cangzhou) Co,.Ltd
No 102 Donghua Road, Qing Country, Hebei Province, 062658, China
Tel:86-317-431-8901 Fax:86-317-402-4588
E-Mail : cangzhou@petromaterials.com
Fax:86-10-8476-5938
E-Mail : beijing@petromaterials.com