Professional Documents
Culture Documents
Whenever MIC is deleted or added, there is need of changing the inspection plan. Changing Inspection plan is an engineering change. Hence any change in inspection plan must be done with an ECR (Engineering Change Request)
Select ECR
Select ECR Select Without Release Key In function section Select 310 Change Type and then press enter to get the next screen.
Enter the description of ECR Enter valid from date Enter reason for change Set status as active i.e. 01
After filling the above data click on object Types to get the next screen.
Click on objects
After clicking the checkbox select Objects to get the next screen
Header
Write Description
Enter task List type Q for change in inspection plan Write the inspection plan number in group section Add description in description column Enter change type as 001
After filling all the required fields click on Header to get the initial screen.
1. Click on SET STATUS icon to get the POP UP 2. Then click on the CHECK ECR icon and save the page to get the change number. Note down the change number for future reference Now it is needed to change the object status for further proceedings Now we have to change ECR
Enter change number and press enter to get the next screen
Click on Objects
2. Click on Header
After clicking on Set Status, a pop up will emerge. Now click on Change possible icon and click on Continue.
After completing this page, go to header by clicking on Header icon to get the next screen.
Click on ECR Checked Icon to get the change in the pop up as shown below.
After Clicking on Convert ECR, click on Continue and save the file and Note down the Change Number.
Now this change number is to be mentioned in the Master Inspection characteristics template whenever there is any change in the existing inspection plan.