Professional Documents
Culture Documents
DOCUMENT CODE
PLAN/PRJ/SUB UNIT PHASE DISCIPLANE DOCUMENT TYPE SERIAL NO. REV. NO. NO. OF PAGES: 3 DATE
NIOEC
000
EG
PL
SP
5051
A0
OCT. , 2005
LINE PIPE
THIS SPECIFICATION IS THE PROPERTY OF NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY. IT IS CONFIDENTIAL AND ALL RIGHTS RESERVED TO THE OWNER. NEITHER WHOLE NOR ANY PART OF THIS DOCUMENT MAY BE DISCLOSED TO ANY THIRD PARTY, REPRODUCTED, STORED IN ANY RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN CONSENT OF THE NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY
OCT. , 2005
NIOEC-SP-50-51(0)
OCT. , 2005
NIOEC-SP-50-51(0)
REVISION INDEX
REV. PAGE
REV. PAGE
REV. PAGE
REV. PAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
NOTES:
1) 2) 3) 4) THIS SHEET IS A RECORD OF ALL REVISIONS TO THIS SPECIFICATION. REMARKS RELATED TO EACH REVISION SHOW A BRIEF DESCRIPTION. THESE REMARKS SHALL BE INTERPRETED IN CONJUNCTION WITH THE REVISED TEXT MARKED BY REVISION NUMBERS. WHEN APPROVED EACH REVISION SHALL BE CONSIDERED AS A PART OF THE ORIGINAL DOCUMENT. NUMBER OF PAGES EXCLUDES THIS SHEET AND THE COVER SHEET.
4 3 2 1 0
OCT. , 2005
S. KESHAVARZ
GH.A.KHOSHROU
M.R.FARZAM
M.A.A.SAJEDI
REV.
DATE
PREPARED
CHECKED
APPROVED
AUTHORIZED
OCT. , 2005
CONTENTS:
0. 1. 2. 3.
OCT. , 2005
NIOEC-SP-50-51(0)
0. INTRODUCTION To satisfy the requirements of this NIOEC Specification, Iranian Petroleum Standard IPS-M-PI190(2) with the modifications as specified herein after shall be strictly followed. Articles 0 through 3 of this document replace entirely the related articles in the referenced IPS Standard. 1. SCOPE This Specification covers technical specifications and general requirements for the purchase of steel line pipe for use in Oil Industries under non-sour as well as sour conditions and is based on API Spec. 5L and shall be read in conjunction with that document. 2. REFERENCES Throughout this Specification the following dated and undated standards/ codes are referred to. These referenced documents shall, to the extent specified herein, form a part of this Specification. For undated references, the latest edition of the referenced document (including any supplements and amendments) applies. For dated references, the edition cited applies. The applicability of changes in dated references that occur after the cited date, shall mutually be agreed upon by NIOEC and the Vendor/Contractor. API API 5L ASTM (AMERICAN PETROLEUM INSTITUTE) "Specification for Line Pipe" (AMERICAN SOCIETY FOR TESTING AND MATERIALS) "Definition of Terms Relating to Metallography"
ASTM E 7
ASTM E 112 "Standard Test Methods for Determining Average Grain Size" ASTM E 165 "Practice for Liquid Penetrant Examination" ASTM E 309 "Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation" ASTM E 570 "Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products" ASTM E 709 "Practice for Magnetic Particle Examination" ASTM F 21 DIN "Standard Test Method for Hydrophobic Surface Films by the Atomizer Test"
(GERMAN STANDARD)
DIN SEL 072 "Ultrasonically Tested Heavy Plates Technical Delivery Specifications" IPS (Iranian Petroleum Standard)
OCT. , 2005
NIOEC-SP-50-51(0)
(INTERNATIONAL STANDARD) "Radiographic Image Quality Indicator for Nondestructive Testing" "Steel, Conversion of Elongation Values Part 1 Carbon and Low Alloy Steels" "Quality Systems-Model for Quality Assurance in Design/Development, Production, Installation and Servicing" "Non-Destructive Testing, Qualification and Certification of Personnel" "Steel and steel products, Inspection Documents" (NATIONAL ASSOCIATION OF CORROSION ENGINEERS) "Laboratory Testing of Metals for Resistance to Sulphide Stress Cracking in H2S Environments" "Evaluation of Pipeline Steels for Resistance to Stepwise Cracking"
NIOEC-SP (NIOEC SPECIFICATIONS) NIOEC-SP-00-10 "NIOEC Specification for Units" 3. UNITS International system of units (SI) shall be used in accordance with NIOEC-SP-00-10, unless otherwise specified.