Professional Documents
Culture Documents
1 UMTS Radio Network KPI-108
1 UMTS Radio Network KPI-108
ZTE University
Content
KPI Classification RAN KPI Definition and Measurement KPI Optimization KPI monitor KPI Case study
KPI Overview
NetNumenM31 (RAN) Mobile Network Element Management System is ZTE Element Management System of operation and management for one or more NEs. (FM, PM, CM) Performance Monitor (according to the importance and usage):
KPI PI: Performance Indicator SPI: statistical performance indicator: with statistical rule such as call completion rate>95%. Customized performance index Performance management Fault Management Configuration Management
Coverage Probability
Resource Usage Class Trouble Cell rate Busy Cell rate Sleeping Cell rate
QoS Class RRC Establishment success rate RAB Establishment success rate Radio Access Success Rate Call drop rate Average UL/DL Throughput RTT Ping with 32 Bytes
Content
KPI Classification RAN KPI Definition and Measurement KPI Optimization KPI monitor KPI Case study
Coverage Probability
Indicator Description
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period
Statistic AreaClutter-wise Indoor or OutdoorBOTH Measurement MethodsDT or CQT Index MeaningThe coverage probability reflects the RF coverage strength and RF signal quality.
Coverage Probability
Indicator Description Indicator Definition
Signaling Flow
Indicator Extension
Coverage Probability is defined as the percentage of the samples whose F=1 for all the measured samples
(NoteUnreasonable samples are not included
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period :15 Mins, 30 Mins,1 Hour. 1Day. Statistic Area cell-wise Indoor or OutdoorBOTH
UE
RRC Connection Request RRC Connection Setup RRC Connection Complete
RNC
CN
RRC Connection Setup Request Times
RRC Connection Setup Complete Times
DT Message Exchange RAB Assignment Request Radio Bearer Setup Radio Bearer Setup Complete RAB Assignment Response Established
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period : 15 Mins, 30 Mins,1 Hour. 1 Day. Statistic Area: RNC & Cell-wise Indoor or Outdoor: BOTH Measurement Method: calculate based on the OMC Counters value Indicator Meaning: RAB assignment is the last step of the service connection. If it is successfully assigned, the connection to the User Panel is Successfully Setup
CS RAB Assignment Success Times +PS RAB Assignment Success Times /(CS RAB Assignment Request Times PS RAB Assignment Request Times100%
UE
RRC Connection Request RRC Connection Setup RRC Connection Complete
RNC
CN
DT Message Exchange
RAB Assignment Request Radio Bearer Setup Radio Bearer Setup Complete Established
Indicator Definition
Signaling Flow
Indicator Extension
CS RAB Establishment Success rate PS RAB Establishment Success rate AMR RAB Establishment Success rate CS C 64/64 RAB Establishment Success rate PS I 64/64 RAB Establishment Success rate PS I 64/128 RAB Establishment Success rate PS I 64/384 RAB Establishment Success rate
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15 Mins, 30 Mins, 1 Hour. 1 Day. Statistic Area: Cell-wise Indoor or Outdoor: BOTH Measurement Method: calculate based on the OMC counters value Indicator Meaning: this indicator reflects the accessibility of the service of the Cell
Call Setup Success Rate RRC Establishment Success Rate (Service Related) RAB Establishment Success rate100%
UE
RRC Connection Request RRC Connection Setup RRC Connection Complete
RNC
CN
DT Message Exchange RAB Assignment Request Radio Bearer Setup Radio Bearer Setup Complete RAB Assignment Response Established
Indicator Definition
Signaling Flow
Indicator Extension
AMR Call Setup Success rate CS C 64/64 Call Setup Success rate PS I 64/64 Call Setup Success rate PS I 64/128 Call Setup Success rate PS I 64/384 Call Setup Success rate PS S 64/64 Call Setup Success rate
Indicator Definition
Signaling Flow
Indicator Extension
Call Drop Rate RNC Triggered CS RAB Release Number RNC Triggered PS RAB Release Number /(Total RAB Release number for CS + Total RAB Release number for PS) 100%
Signaling Flow
Indicator Extension
Indicator Definition
Signaling Flow
Indicator Extension
CS Call Drop rate PS Call Drop rate AMR Call Drop rate CS C 64/64 Call Drop rate PS 64/64 Call Drop rate PS 64/128 Call Drop rate PS 64/384 Call Drop rate
Indicator Definition
Signaling Flow
Indicator Extension
Measurement Method: calculate based on the OMC Counters value Indicator Meaning: Rate of blocked calls due to resource shortage. This index partially reflects the degree of congestion in the cell.
The number of blocked calls / The number of call admission requests Times100%
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15 Mins, 30Mins, 1Hour. 1Day Statistic Area: RNC-wise Indoor or Outdoor: BOTH Measurement Method: calculate based on the OMC counters value Indicator Meaning: this indicator reflects the soft handover mobility in the RNC control area.
Indicator Definition
Success flow
Signaling Flow
UTRAN
Indicator Extension
UE
UTRAN
Indicator Definition
Signaling Flow
Indicator Extension
Configuration unsupported failure caused handover failure rate Physical channel failure caused handover failure rate Incompatible simultaneous reconfiguration caused handover failure rate Protocol error caused handover failure rate Cell update occurred caused handover failure rate Invalid configuration caused handover failure rate No reply caused handover failure rate
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour. 1Day Statistic Area: cell-wise Indoor or Outdoor: BOTH Measurement Method: calculate based on the OMC counters value Indicator Meaning: this indicator reflects the hard handover mobility in the RNC control area.
Inter-Frequency Hard Handover Attempted Times Inter-Frequency Hard Handover Failure Times / Inter-Frequency Hard Handover Attempted Times 100%
Inter-Frequency Hard Handover should Include Intra-RNC Hard Handover and Inter-RNC Hard Handover
Indicator Definition
Success Flow
Signaling Flow
SRNC
Indicator Extension
UE
Failure Flow
SRNC
Node B
Serving RNS
Drift RNC
[A1] [A2]
RANAP
Relocation Request
Radio Link Setup NBAP NBAP Radio Link Setup Response NBAP NBAP RANAP Relocation Request Ack. RANAP Relocation Command RANAP RANAP RRC
RRC NBAP
Relocation Detect
RRC
RRC
[B2]
RANAP RRC RRC UE Mobility Information UE Mobility Information CONFIRM RRC RRC
Relocation Complete
RANAP
Feedback to DRNC
[B1]
Iu Release Command RANAP RANAP Iu Release Complete RANAP RANAP NBAP NBAP
NBAP NBAP
Indicator Definition
Signaling Flow
Indicator Extension
Configuration unsupported caused intra-NodeB inter-frequency hard handover failure rate Configuration unsupported caused intra-RNC inter-frequency hard handover failure rate Configuration unsupported caused inter-RNC inter-frequency hard handover failure rate Physical channel failure caused intra-NodeB inter-frequency hard handover failure rate Physical channel failure caused intra-RNC inter-frequency hard handover failure rate Physical channel failure caused inter-RNC inter-frequency hard handover failure rate
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: cell-wise or RNC-wise
Indoor or Outdoor: BOTH Measurement MethodCalculate based on OMC Counters value Indicator Meaning: this indicator reflects the Inter-RAT CS handover mobility, the handover is from UMTS system to GSM system.
CS Inter-RAT Handover Success RateUMTS->GSM 1CS Inter-RAT Handover From UTRAN Failure Times /CS Inter-RAT Handover From UTRAN Required Times100%
Indicator Definition
Signaling Flow
Indicator Extension
CN
2GMSC
Relocation command
Handover complete
UE UTRAN
Failure Flow
CS Inter-RAT Handover From UTRAN Failure Times, if the handover is failed, RNC will receive this message
Indicator Definition
Signaling Flow
Indicator Extension
Configuration unsupported caused CS Inter-RAT handover from UTRAN failure rate Physical channel failure caused CS Inter-RAT handover from UTRAN failure rate Configuration incomplete caused CS Inter-RAT handover from UTRAN failure rate Protocol error caused CS Inter-RAT handover from UTRAN failure rate Cell update occurred caused CS Inter-RAT handover from UTRAN failure rate Invalid configuration caused CS Inter-RAT handover from UTRAN failure rate No reply caused CS Inter-RAT handover from UTRAN failure rate
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour. 1Day Statistic Area: cell-wise or RNC-wise
PS Inter-RAT Handover Success RateUMTS->GPRS 1PS Inter-RAT Handover From UTRAN Failure Times /PS Inter-RAT Handover From UTRAN Required Times100%
Indicator Definition
RNC Iu Release Command
Signaling Flow
Indicator Extension
3G SGSN
Failure Flow
UTRAN
PS Inter-RAT handover from UTRAN failure times. If the RNC received this message, or response message of Iu Release Command is not received by RNC, it means the PS handover from UTRAN is failed.
Indicator Definition
Signaling Flow
Indicator Extension
configuration unsupported caused PS Inter-RAT handover from UTRAN failure rate physical channel failure caused PS Inter-RAT handover from UTRAN failure rate configuration incomplete caused PS Inter-RAT handover from UTRAN failure rate protocol error caused PS Inter-RAT handover from UTRAN failure rate cell update occurred caused PS Inter-RAT handover from UTRAN failure rate invalid configuration caused PS Inter-RAT handover from UTRAN failure rate No reply caused PS Inter-RAT handover from UTRAN failure rate
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: cell-wise or RNC-wise
Indicator Meaning: this indicator reflects the Inter-RAT handover mobility, the handover is from GRRS system to UMTS system.
PS Inter-RAT Handover to UTRAN Success rateGPRS->UMTS PS Inter-RAT Handover to UTRAN Success Times /PS Inter-RAT Handover to UTRAN Attempted Times100%
Indicator Definition
Serving RNC
Signaling Flow
Indicator Extension
CN
The flow of PS Inter-RAT handover to UTRAN is similar to the PS setup flow on the UTRAN Side
2. Direct Transfer
RNC received message RRC Connection Requestfrom UE, the cause is Inter-RAT cell reselectioncan be used for calculating the PS Inter-RAT handover to UTRAN required timesRNC received message RRC Connection Complete (From UE) can be used for calculating the PS Inter-RAT handover to UTRAN success times
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: Statistic Area: Indoor or Outdoor: BOTH Measurement MethodDT&CQT Indicator Meaning: this indicator reflects the integrity of CS 12.2K service. It is one of the most important indicators of the customers experience.
Indicator Extension
CS12.2K Service Access Time Average TCC Alert) T RRC Connection Request
Indicator Definition
RNS
Signaling Flow
CN
Indicator Extension
Incoming CN
RRC Connection Request RRC Connection Setup RRC Connection Setup Complete CN Signaling Connection Process RRC DT(CM Service Request) Authority and Safe Mode Process RRC DT(Setup) RRC DT(Call Proceeding) RAB Assignment Process ISUP IAM CN Bear Setup Process ISUP ACM ISUP ANM
TCC Alert
RRC DT (Alert) RRC DT(Connect) RRC DT(Connect ACK)
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: Statistic Area: Indoor or Outdoor: BOTH Measurement Method DT&CQT Indicator Meaning: this indicator reflects the integrity of CS 64K service. It is one of the most important indicators of the customers experience.
Indicator Extension
CS64K Service Access Time Average TRRC Request) TCM Service Request
Indicator Definition
RNS
Signaling Flow
CN
Indicator Extension
Incoming CN
CN Signaling Connection Process RRC DT(CM Service Request) Authority and Safe Mode Process RRC DT (Setup) RRC DT (Call Proceeding) RAB Assignment Process ISUP IAM CN bear setup process ISUP ACM ISUP ANM
TCC Alert
RRC DT (Alert) RRC DT (Connect) RRC DT (Connect ACK)
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: Statistic Area: Indoor or Outdoor: BOTH Measurement Method DT&CQT Indicator Meaning: this indicator reflects the integrity of PS service. It is one of the most important indicators of the customers experience.
Indicator Extension
PS Service Access Time Average T Active PDP Context Accept) T Activate PDP Context Request
Indicator Definition
RNS
Signaling Flow
CN
Indicator Extension
Incoming CN
Indicator Definition
Signaling Flow
Indicator Extension
Indoor or Outdoor: BOTH Measurement MethodCalculate based on OMC Counters value Indicator Meaning: this indicator reflects the traffic Erlang of the CS conversation service
Signaling Flow
Indicator Extension
CS Call Duration TimeRadio Link Setup Response TimeRadio Link Deletion Response
CS AMR Voice Service Traffic Erlang CS Video Phone Service Traffic Erlang
PS Service Throughput
Indicator Description
Indicator Definition
Signaling Flow
Indicator Extension
PS Service Throughput
Indicator Description Indicator Definition Signaling Flow Indicator Extension
UL PS Service ThroughputRNC Received Total RLC PDU Bytes DL PS Service ThroughputRNC Sent Total RLC PDU Bytes
Including user dataRLC head dataretransfer datasignaling dataUnitKbytes
PS Service Throughput
Indicator Description
Indicator Definition
Signaling Flow
Indicator Extension
PS I 64/64 UL Throughput PS I 64/64 UL Throughput PS B 64/64 UL Throughput PS B 64/64 UL Throughput PS S 64/64 UL Throughput PS S 64/64 UL Throughput
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: cell-wise Indoor or Outdoor: BOTH Measurement Method: Calculate based on Measurement Report value Indicator Meaning: this indicator reflects the cell average UL load factor in a defined period, it is calculated based on the RTWP value on a certain frequency.
UL Interference Load Factor UL RTWP measurement valueN0 /UL RTWP measurement value100%
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: cell-wise Indoor or Outdoor: BOTH Measurement Method: Calculate based on Measurement Report value Indicator Meaning: this indicator reflects the cell average DL load degree in a defined period, it is calculated based on the base station Tx power.
DL Power Load Factor DL Average Transmitting Carrier Power/ Configured DL Maximal Transmitting Carrier Power100%
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: RNC-wise Indoor or Outdoor: BOTH Measurement MethodCalculate based on OMC Counters value Indicator Meaning: this indicator reflects the rate of dead cells to total cells, it is an assistant to analyze the QoS of whole network.
Trouble Cell is the cell whose call drop rate >a or Radio Access Success rate <b
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: RNC-wise Indoor or Outdoor: BOTH Measurement MethodCalculate based on OMC Counters value Indicator Meaning: this indicator reflects the rate of busy cells to total cells, it is an assistant to analyze the QoS of whole network.
Busy cell is the cell whose DL Power Load factor >c or Code Resource Occupation Factor >d
Indicator Definition
Signaling Flow
Indicator Extension
Statistic Period: 15Mins, 30Mins, 1Hour., 1Day Statistic Area: RNC-wise Indoor or Outdoor: BOTH Measurement MethodCalculate based on OMC Counters value Indicator Meaning: this indicator reflects the rate of idle cells to total cells, it is an assistant to analyze the QoS of whole network.
Signaling Flow
Indicator Extension
Content
KPI Classification RAN KPI Definition and Measurement KPI Optimization KPI monitor KPI Case study
Radio access success rate = RRC establishment success rate RAB establishment success rate This formula indicates that RRC establishment rate and RAB establishment rate need to be considered in the background statistics. RRC establishment success rate = Number of successful RRC connection setup times of each cell / Number of RRC connection request times of each cell 100 Note: related with services (RRC connection) RAB establishment success rate = Number of successful RAB establishment times / Number of RAB establishment attempts 100% RAB establishment success rate is categorized by service.
There are two restraints in RAB establishment process. One is RB establishment which is the UE configuration process (usually no problems occur in this process); and the other is radio link re-configuration process in which NodeB links are configured. Failures often occur in the latter process. The usual causes for these failures include radio link re-configuration preparation failure (it occurs when problems occur in NodeB resources.), and radio link re-configuration cancellation (it occurs when problems occur in RNC internal resources or process). Another factor may also cause RAB failures, that is, when the load of a cell is relatively heavy, RNC sends out a reject command via admission control.
Handover area is too small, so that UEs have not enough time to complete handover. Handover parameters are wrongly set, so that neighbor cells cannot be added or deleted timely, or causing ping-pong handover. Neighbor cells are not configured. This may cause damage to the network, not only directly causing call drop, but also brings extra interference towards the network.
Content
KPI Classification RAN KPI Definition and Measurement KPI Optimization KPI monitor KPI Case study
One reason for resource limitation is number of 3G user increase, and operator changing fee decrease also lead to the increase of average erlang. The other reason is the strategy for design is focus on user feeling and KPI but not system capacity. For example HK user average Erl could be up to 0.5E.
Resource KPI and threshold. Resource KPI mainly include DL power, UL capacity, code resource and CE resource.
Resource Type KPI id and name threshold C301320150 Number of rejected services,DCH downlink TCP limit 50 TCP
40%
100% 70% 0.5% -98dBm 50 12 16 60%
UL Traffic
Code
CE
60%
Related KPI
DL power monitor
2009-06-09 00:00:00 01:00:00 02:00:00 03:00:00 04:00:00 05:00:00 06:00:00 07:00:00 08:00:00 09:00:00 10:00:00 11:00:00 12:00:00 13:00:00 14:00:00 15:00:00 16:00:00 17:00:00 18:00:00 19:00:00 20:00:00 21:00:00 22:00:00 23:00:00
DL power monitor
Modify reserve HSDPA power according to system algorithm. MinHsdpaPowerMinHspaPwrRto+NoHsPower >Node B admission thresholdMinHsdpaPower stands for HSDPA reserved power DL congestion control will start (downgrade DL DCH rate) MinHspaPwrRto default value is 20%.
Number of rejected services,Handover 2500 2000 1500 1000 500 0 -500 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1 2 1 0 0 0 0 0 0 0 0 2 2 22 99 556649108471821954108121201760 66 9 19 13 0 6 28 113187252 95 214261285367643 86 10 11 4 3
2009-6-12 6 2009-6-17 0
DL power monitor
Because high load cell often be with high admission failure, normally we should fast downgrade to release radio resource ASAP. Avoid handover user could not handover in the cell then call dropped.(this action is only take effect in cell with much more PS users, if all users in the cell is in CS service. It will not take effect).
Abbreviated Name UlDnMaxStg DlDnMaxStg Parameter name Maximum Number of Degraded Uplink Load Steps Every Time Maximum Number of Degraded Downlink Load Steps Every Time Range Current Update and Step Value value [1, 8] [1, 8] 1 1 2 3 remark Downgrade from 384kbps to 16kbps Downgrade from 384kbps to 8kbps
DL power monitor
Through decrease DL Eb/No could lead to reduced congestion. While we need detailed evaluation to avoid some other bad effect. Table showed record for the modification, and can be consider as the reference. ZTE engineering experience showed downgrade Eb/No for 13.6K signaling channel could reduce TCP limitation effectively, while the performance of access will not be affect so much.
Parameter Current Update Modify remark name Value value purpose Downlink B class parameterservice related parameter, Reduce TCP 7.5 5.1 Traffic Eb/No modify 13.6K signaling only (service class 5) Limit
UL capacity monitor
Call drop rate increasing not means UL capacity limitation, but call drop increasing is the most common scene for limitation. Because call drop rate is most cared KPI, and be observed every day.
0:00:00
1:00:00
2:00:00
3:00:00
4:00:00
5:00:00
6:00:00
7:00:00
8:00:00
9:00:00
10:00:00
11:00:00
12:00:00
13:00:00
14:00:00
15:00:00
16:00:00
17:00:00
18:00:00
19:00:00
20:00:00
21:00:00
22:00:00
23:00:00
UL capacity monitor
RTWP increasing is the most directly representation for UL limitation, while sometimes reason for RTWP increasing could be external interference. And its hard to eliminate this reason.
0:00:00
1:00:00
2:00:00
3:00:00
4:00:00
5:00:00
6:00:00
7:00:00
8:00:00
9:00:00
10:00:00
11:00:00
12:00:00
13:00:00
14:00:00
15:00:00
16:00:00
17:00:00
18:00:00
19:00:00
20:00:00
21:00:00
22:00:00
Maximum RTWP(dBm)1
Maximum RTWP(dBm)2
23:00:00
UL capacity monitor
Erlang is determining factor for UL limitation either. There are many factors related to the erlang of a cell. Normally we should care for cell capacity, if erlang in a cell exceed 20 erlang in BH.
30 25 20 15 10 5 0
0:00:00
1:00:00
2:00:00
3:00:00
4:00:00
5:00:00
6:00:00
7:00:00
8:00:00
9:00:00
10:00:00
11:00:00
12:00:00
13:00:00
14:00:00
15:00:00
16:00:00
17:00:00
18:00:00
19:00:00
20:00:00
21:00:00
22:00:00
23:00:00
UL capacity monitor
UL Power control parameter modification. The quality of users will be down as a consequent of capacity increasing. Optimization will do trade-off between capacity and quality.
Parameter meaning
Modification object Uplink 3.4k/13.6k Signaling Uplink 12.2k AMR Uplink 3.4k/13.6k Signaling Uplink 12.2k AMR Uplink 3.4k/13.6k Signaling Uplink 12.2k AMR Uplink 3.4k/13.6k Signaling Uplink 12.2k AMR
Current new Value value 4-5 15 2/250 0.1 3.5 10 1/70 0.2
Uplink Initial SIR target (dB) Maximum Uplink SIR ULMAXSIR target (dB) B class BLER Period Factor / parameter Tolerance BLER Period UlSirTargDnS Uplink SIR Target Down tep Step Size (dB)
UL capacity monitor
Through UL power control parameter optimization we can improve RTWP increasing, but some cells will be in trouble for user increasing. And further modification to SIRtarget will affect subscriber feeling. For this case ZTE suggest to define another set of power control parameter which is special for these high load cells. The following table is comparison of parameters for special site and parameters for normal site.
SRVTYPE 0 104 28 50 54 ULINITSIR 3.5->1.5 4.0->2.0 3.5->1.5 6.0->2.0 6.0->2.0 ULMAXSIR 10.0->3.5 15.0->5.0 10.0->3.5 15.0->5.0 15.0->5.0 ULMINSIR 2.0->1.0 0.5->0 0.5->0 2.0->0 2.0->0
Through observing "Number of rejected services, DCH no code we could know cell is in code limitation. Also average code resource usage and HSDPA user number could be factor for determination and optimization. We could modify the code allocation to reduce code limitation. OcuRateNoHspdsch+OcuRateHspdsch+DpchCodeHy+32<=512 formula 1 OcuRateNoHspdsch+OcuRateHspdsch+CodeUptHyA>512 formula 2
OcuRateHspdsch is the number of code (SF=512) which is blocked by the code occupied by HS-PDSCH channel. OcuRateNoHspdsch is the number of code (SF=512) which is blocked by the code occupied by not HS-PDSCH channel. DpchCodeHy is the number of code (SF=512) reserved for DPCH channel. CodeUptHyA is the threshold to determine if we need decrease HS-PDSCH channel number.
When formula1 is fulfilled NO. of HS-PDSCH +1. When formula 2 is fulfilled NO. of HS-PDSCH -1.
Content
KPI Classification RAN KPI Definition and Measurement KPI Optimization KPI monitor KPI Case study
Background
Victory Park more than 100,000 People Gathering Time is 20:00 June 4th Performance deteriorate for site VPK at Victory Park Call Drop Rate Increase Site VPK Transmission Code Power Congestion
KPI Indication
Case 1:VPK Radio Access Rate and Rejected Services by TCP limit
After the configuration data check, we found that there are several cells with a wrong LAC configuration. We need KPI monitor tools to give us an evidence. Use SAY Site as an example:
Number of attempted RRC Establishment is more than 100,000 times while only around 6,000 times for services.
Case 3High Call Drop Rate Due To The NSN Sites Interference
Background
After the KPI monitoring, we found the drop rate around Convention and Exhibition Center is quite high.
After the drive test and KPI analysis, we found the reason is that the NSN LUR site F1 is still open. After the site is turned off on 12th May the call drop rate decreased.
Case 3High Call Drop Rate Due To The NSN Sites Interference
Site CTW has very high call drop rate. After checking the Fault management Alarm, there are a lot of board reboots alarm. After checking the NodeB, the reason for this alarm is nonsufficient power supply due to GSM, UMTS and NSN BTS in very narrow space with a temporary power solution. Three times Node B is out of service(198083023) during 15:00 to 16:00 on June 11th.
Background:
After 80% NSN UMTS users are cut into the network on may 11th, subscriber number increased a lot
KPI Indication:
Analysis
Solution: