Professional Documents
Culture Documents
MV Sub R 2365 6
MV Sub R 2365 6
Options
PARTS LIST
Catalog Part No. Description
Y-1 Y-3 Y-4 Y-5 Y-7 Y-8 Y-10 Y-16 Y-23 Y-206 Y-209 Y-211 Y-212 Y-213 Y-214 Y-217 Y-218 Y-219 Retaining Nut Hand Wheel Washer Bush Nut Gland Nut Packing Gland Gland Bolt Bonnet Bolts & Nuts Stem Packing Guide Cap Bearings Wedge, Rubber Encapsulated Bonnet O-ring Body Stem Bonnet & Yoke O-ring Disc Nut Stem Nut Pin
Y-5 Y-3
Material
Carbon Steel E Coated Ductile Iron Brass Brass Silicon Bronze Ductile Iron Stainless Steel Stainless Steel Lubricated Flax Acetyl Cast Iron** SBR Ductile Iron Stainless Steel Ductile Iron Nitrile Ductile Iron E Coated Stainless Steel
Material Standard
ASTM A36 ASTM A536 Grade 65-45-12 ASTM B36 ASTM B16 ASTM B98 ASTM A536 Grade 65-45-12 Type 304 Type 304
Y-4 (not shown) Y-1 Y-214 Y-213 Y-8 Y-7 Y-10 Y-23
Y-16
A(open) AA(closed)
ASTM A126 CL.B ASTM D2000 ASTM A536 Grade 65-45-12 Type 431 ASTM A536 Grade 65-45-12 ASTM D2000 ASTM A536 Grade 65-45-12 Type 303
FFF
UU
DIMENSIONS
Dimension*
A AA E R FF UU FFF (number and size of holes) Turns to open Weight (lbs.)*
Size 2-1/2"
20.33" 16.53" 7.00" 7.00" 7.50" 5.50" 4--.75" 11 50
FF
3"
20.16" 16.32" 7.00" 7.50" 8.00" 6.00" 4--.75" 11 52
4"
23.63" 18.94" 10.00" 9.00" 9.00" 7.50" 8--.75" 14 76
6"
30.00" 23.22" 12.00" 11.00" 10.50" 9.50" 8--.88" 20.5 119
8"
37.37" 28.60" 14.00" 13.50" 11.50" 11.75" 8--.88" 26.5 182
See page B-1-22 for ordering insturctions. NOTE: Flanged ends have 125lb. American Standard End Flange Drilling, ANSI B16.1. *All dimensions are in inches. All weights are in pounds and are approximate. ** Fully encapsulated in molded rubber with no iron exposed.
PROJECT INFORMATION
Project: Address: Contractor: Engineer: Submittal Date: Notes 1: Notes 2:
Mueller UL/FM - 5.12
APPROVAL STAMP