Professional Documents
Culture Documents
Steam operated heater used to heat the inlet water The cooling tower water inlet and outlet lines are outfitted with temperature probes from which the water stream temperatures were read (oC) The rotameter was used to set inlet water flow rate (l/h)
Method The method in the lab manual was used with the following addendums: The runs were taken as follows :
Table 1: Operation of the experimental runs
Water inlet Flowrate Run 1 High Run 2 Low Run 3 High Run 4 Low Where: Low flowrate = 700 l/h High flowrate Low temperature High temperature = 5000 l/h 35.8 oC 40.0 oC