Professional Documents
Culture Documents
Tehničke Karakteristike Reduktora 1MW - Eng
Tehničke Karakteristike Reduktora 1MW - Eng
of Gearboxes for the belt conveyor drive B=2000mm No. 1. 2. Name Nominal motor power Input RPM Values/ Requirements P=1000 kW n=1000 min NOTE Range 600-1200 min, with drive electromotor with frequency regulation For composite operation with existing gearboxes At 1000 min For drives with frequency regulation, according to DIN 3960
3. 4. 5.
i=17,267 Mn= 9500Nm 3-degree conical-cylinder gearbox KA2 24 h From -25C to +40C Longitudinal: 3, Transversal: 1,5 Mineral oil, gradations ISO VG 320 Ball bearings with brass cages 50000 h SH min = 1.2 SF min = 1.4
Service factor Work engagement Temperature of the working environment Work surfaces/inclinations Cooling fluid and lubrication Drive shaft bearings Bearings lifespan Min. level of safety of the toothing
According to DIN 51519 FAG, SKF, INA According to DIN 3990 and DIN 3991 According to VDI 2159, noise measurement according to DIN 45635. Vibrations according to VDI 2056 and DIN ISO 10816
14.
15.
16. 17.
With high-quality radial sealing rings + additional labyrinth sealing with grease filling, Shaft and bearings sealing envisage split-ring seal at the output for the replacement without dismantling the entire gearbox Connection between the Flange with ducts for hydraulic gearbox and belt drums dismantling drive shaft Compulsory/by fan + Drive cooling oil splashing
18.
Gearbox heating Indicators for monitoring the temperature Indicators for monitoring vibrations
19.
Envisage Pt100 - probes Envisage measurement points for monitoring the vibrodiagnostics
20.
No. 21.
Vrednosti/ Traeni zahtevi Flexible, brake drum at the gearboxside Mechanical, double-jaw with brake thruster Envisage protective roof above the gearbox, as well as protective hood for fan and coupling with brake The oil sump/the casings interior should be protected with abrasion resistant coating, Gearboxs exterior should be protected with 2-K-PU coatings Standard plate with the basic data for gearbox Additional plate with the gearboxs weight and points for load suspension
NOTE
22.
Drive brake
23.
24.
Casing: RAL 1021, Protective hoods: RAL 6021 Rotating elements: RAL 3001 Brake: RAL 6021
25.
Gearbox labelling