Professional Documents
Culture Documents
ROI-S05752
1.1
XPIC CTRL
TX RX XPIC RESET
PROTECT
PASOLINK NEO
MAINT MEMORY IDU MMC
LCT
NMS
NE
AUX/ALM
SC IN/OUT
EOW
CALL
LCT port
LCT NMS NE
USB Cable
LCT SETUP
Note: 1. Before connecting the LCT, you need to start to install the USB Driver, Java 2 Runtime and the Dial-up. For the details, refer to Chapter 10 to Chapter 12. 2. Do not perform the dial-up setup before USB driver installation has not been completed. 2 Click on START menu button, select Connect to, LCT, then, Connect LCT dial-up dialog is appeared,
-2-
ROI-S05752
Introduction
3 4
The dialog box Connect LCT appears, Click on Dial button, then the PC is accessed to the IDU,
5 6
Open the Internet Explorer, Enter URL address: Http//172.17.254.253 of the Internet Explorer and press the Enter key,
-3-
Introduction
ROI-S05752
Enter User ID and password in User/Password entry fields and press the Login button,
Pass Word
******** (non password)
Privilege Access to the LCT and control Access to the LCT (monitor only)
The password can be changed by Administrator privilege. The LCT operator must have the security system privilege to control of PASOLINK NEO systems. (The password change is described in Chapter 6.3 Maintenance 2) 8 Following LCT Open View is displayed, (Cascaded Alarm/Status items are displayed in Main area by default.)
-4-
Installation of USB
ROI-S05752
2.
-84-
ROI-S05752
Installation of USB
3.
Insert the CD-ROM of the USB driver to the PC and select Search for the best driver in these locations and check Search removal media [floppy, CD-ROM...], then, click on Next button,
4.
5.
-85-
Installation of USB
ROI-S05752
6.
Click Finish button in the Found New Hardware Wizard after installation has been completed.
-86-
ROI-S05752
Dial-up Setting
2.
The Network Connections window appears. Click on Create a new connection in the Network Tasks category.
-87-
Dial-up Setting
ROI-S05752
3.
The Welcome to the New Connection Wizard window appears. Click on Next button to continue.
4.
Select Connect to the network at my workplace and click on Next button to continue.
-88-
ROI-S05752
Dial-up Setting
5.
6.
On the New Connection Wizard window, enter LCT in the Company Name entry field and click on Next button to continue.
-89-
Dial-up Setting
ROI-S05752
7.
Enter phone number in the Phone number entry field and click on Next button to continue.
8.
Verify that the connection LCT has displayed as the connection registered. You can also create a shortcut on your desktop if you need. Click on Finish button.
-90-
ROI-S05752
Dial-up Setting
9.
10. Verify that Modem-USB Modem Driver [COM(#)] is displayed on the General tab connect using check box, and select Show icon in notification area when connected in the LCT Properties dia-log. Then, click on Configure button.
-91-
Dial-up Setting
ROI-S05752
11. On Modem Configuration dia-log, check that unchecked all five boxes, then click on OK button,
12. Retain the default setting on the Options tab, click the Security tab.
-92-
ROI-S05752
Dial-up Setting
13. Retain the default setting on the Security tab, click the Networking tab.
14. On the Networking tab, verify that PPP... is displayed in the Type of dial-up server I am calling setting field, unchecked File and Printer... and Client for Microsoft...., Client for Microsoft Networks.
-93-
Dial-up Setting
ROI-S05752
15. Click Settings button, unchecked all the boxes in the PPP Settings dialog as shown below. Click OK to go back to the previous window. Point Internet Protocol (TCP/IP) and then click Properties.
16. Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.
-94-
ROI-S05752
Dial-up Setting
18. In the Advanced TCP/IP Settings dialog, mark check box of Use default gateway on remote network and for the PPP link is unchecked, then Click OK.
19. Retain the default setting on the Advanced tab and click OK.
-95-
ROI-S05752
-9696 pages