Professional Documents
Culture Documents
pattern guide.
45 Cutting Guide #218 Size XXS Requires 3 yards
Sizes XXS Bust 34-35 Waist 25-26 Hip 35-36 Finished Garment Measurements Bust 39 Back Lgth 23 Sleeve Lgth 30
Yardage
INTERFACING
Cutting Layout Sizes XXS 45 Interfacing - 3/4 Yd
selvage
#10
selvage
1. Print all pages on standard printer paper. It is important that you set your printer preference to print full size. These documents are sized to fit most printers print areas. Measure the 3 x 3 square on the next page to determine the print accuracy. 2. Using the templates on the first two pages, align the registration marks which appear on the adjoining pages. 3. Tape the pages together keeping the registration marks aligned. 4. Cut out your pattern pieces. Once you have aligned the pages together to create the pattern pieces, ignore the circle/crosshair registration markings and cut right through it as necessary. 5. Dashed lines around edges are to denote the edge of the printed area. You may choose to trim the pages to these lines if your paper is too thick to see through. Find the split registration marks on adjoining pattern pages and align them until they form a whole pattern.
Perfect
This square should measure exactly 3x 3 If is does not, then recheck your printer settings.
x
2013 Islander Sewing Systems www.IslanderSewing.com