Professional Documents
Culture Documents
Given: B= H= P= Ac = Ig = M= Required:
L= W= c=
30 1.2 10
ft K/ft in
10 10
10 1620 K-in
a) Find the eccentricity for the simply supported beam & Also show the distribution at zero compressive stresses on the vertical section at the mid span, produced by total load and pre stressed tendon.If it is pre stressed by a straight tendon that causes an effective force of 233 kips. If the beam comes a total service load of 1.2 kip/ft including the dead load of 0.21 kip/ft. Solution:
By Haris Alam
Given: B= H= e= Ac = Ig = M= Required:
L= W= c=
30 1.2 10
ft K/ft in
10 10
10 1620 K-in
a) Find the Prestressing force for the simply supported beam & Also show the distribution at zero compressive stresses on the vertical section at the mid span.If it is pre stressed by a straight tendon achored at e= 4". If the beam comes a total service load of 1.2 kip/ft including the dead load of 0.21 kip/ft. Solution:
So the Compression will become Zero at Prestressing force of 220.91 kips providing e=4"