PILOT PLANT PERSONNEL TRAINING PLAN and RECORD NAME OF PERSONNEL: _________________________ DESIGNATION: _______________ DATE ACQUIRED:_______________ LOCATION: __________________ ACTIVITY: Operation of Extrusion Machine Competency Check Training Method Target Date of Training Date Demonstrated by Tranee Trainer's Initial: 1 Knowledgeable in Good Manufacturing Practices 2 Have awareness of policy and procedures in Pilot Plant 3 Have awareness of safety policy in Pilot Plant 1 Identified the parts and accessories of the machine 2 Performed installation 3 Performed start-up 4 Operated with supervision 5 Have knowledge of intermediate check/quality control procedures 6 Performed clean-up 7 Performed maintenance procedure on schedule 1 Can identify and recommend process improvements 2 Performed repair or trouble shooting 3 Operated without supervision 4 Is knowledgeable on intermediate checks and performing corrective action 5 Performed dismantling and clean-up 6 Performed preventive maintenance Comments: Date: Trainee's Initial: Supervisor's Initial: Trainee has demonstrated acceptable performance for all competencies listed A D V A N C E EQUIPMENT: Single-screw Extrusion Machine EQUIPMENT ID: _______________ B A S I C P R E
R E Q Document Code Page 1 Revision No.: 0 Effectivity Date: