You are on page 1of 1

GOVERNMENT OF ANDHRA PRADESH

A B S T R A C T

R&B Common SSR for all Engineering Departments Fixation of Cement and Steel Rates
for the month of August, 2013 (3
rd
month of 1
st
quarter) Orders Issued.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TRANSPORT, ROADS AND BUILDINGS (R.I) DEPARTMENT
G.O.Rt.No. 882 Dated:10.09.2013.
Read the following:

1. G.O.Ms.No. 94, T.R & B, (R.I) Dept., Dated: 16.04.2008.
2. From ENC(I.W) I&CAD Lr. No. ENC/IW/P&M/ EE.III/ DEE10/ 5
AE/13305/13, Vol.-18 Dated: 23. 08. 2013.

***
O R D E R :

The Engineer-in-Chief (IW) I&CAD, in his letter 2
nd
read above, has informed that in
terms of orders issued in G.O.1
st
read above the Sub-Committee of Engineers which met on
12.08.2013, has finalized the rates of Cement & Steel for the month of August, 2013, (3
rd

month of 1
st
quarter) of 2013-14 SoR and requested to approve the same.

2. Government, after careful examination of the matter hereby approves the rates of
cement & steel, for the month of August, 2013, (3
rd
month of 1
st
quarter) of 2013-14 SoR,
as detailed below:-
Sl.
No.
Material Rates fixed for August , 2013 (Rate for 1 MT.)
CEMENT
1. a) Ordinary Portland Cement
(43/53 grade)
Rs.5,800/- (Rupees Five Thousand Eight Hundred
Only)
b) Portland Pozzolana Cement Rs.5,600/- (Rupees Five Thousand Six Hundred only)
c) Portland Slag Cement Rs.5,500/- (Rupees Five Thousand Five Hundred only)
STEEL
2. 6 mm M.S.Rods Rs.41,500/- (Rupees Forty One Thousand Five
Hundred only)
3. M.S.Flats Rs.40,000/- (Rupees Forty Thousand only)
4. Mild steel, structural steel, i.e
Angles channels & I-sections
Rs.43,000/- (Rupees Forty Three Thousand only)
5 TMT /HYSD bars
a. Fe-415 Rs.41,500/- (Rupees Forty One Thousand Five
Hundred only)
b. Fe-500 Rs.43,000/- (Rupees Forty Three Thousand only)
6. M.S.Plates Rs.42,000/- (Rupees Forty Two Thousand only)
7. HSCR Steel bars
Fe-500 Rs.47,300/- (Rupees Forty Seven Thousand Three
Hundred only)
8. P.C. drawn steel wire/H.T. Wire
3 mm
Rs.58,000/- (Rupees Fifty Eight Thousand only)
9. P.C. drawn steel wire/HT wire
4 mm
Rs.57,300/- (Rupees Fifty Seven Thousand and
Three Hundred only)
10. H.R.Sheet in coils 1.6 mm Rs.47,500/- (Forty Seven Thousand Five hundred
only)
11. H.R.Sheet in coils 2.0 mm Rs.45,500/- (Rupees Forty Five Thousand Five
hundred only)
12. 5.5/6.0 mm M.S wire rod coil Rs.46,800/- (Rupees Forty Six Thousand Eight
Hundred only)
13. Foundry Grade Pig Iron (2.00 to
2.24) (Excluding Taxes)
Rs.27,500/- (Rupees Twenty Seven Thousand Five
Hundred only)

3. All the Heads of Departments/Corporations, Universities, Agencies dealing with PWD
works shall take action accordingly.
4. This order issues with the concurrence of Fin. Dept. vide their, U.O.No.23810/946/
Expr.PW-II/2013,Dated:07.09.2013.
(BY ORDER AND IN THE NAME OF THE GOVERNOR OF ANDHRA PRADESH)
B.SAM BOB
PRINCIPAL SECRETARY TO GOVERNMENT

The Engineer-in-Chief (IW), I & CAD Dept. (P&M Cell), Hyderabad.
The Engineer-in-Chief (R&B), Admn. & NH, Hyderabad.
The Director of Works Accounts, A.P., Hyderabad.

//FORWARDED BY ORDER//
SECTION OFFICER

You might also like