The document discusses various types of interior lighting elements including luminous beams, panels, coffers, tubing, and elements. Luminous beams incorporate light sources in translucent materials to resemble other materials like steel or wood when unlit. Luminous panels are large illuminated areas like skylights, while luminous coffers and troffers are recessed ceiling areas lit by central or edge lamps. Luminous tubing uses fluorescent lamps or tubes exposed or with simple diffusers to make light lines or patterns. These and other combinations can provide both decorative effects and general illumination. Architects must provide adequate space for lamps and controls when integrating lighting into a structure.
The document discusses various types of interior lighting elements including luminous beams, panels, coffers, tubing, and elements. Luminous beams incorporate light sources in translucent materials to resemble other materials like steel or wood when unlit. Luminous panels are large illuminated areas like skylights, while luminous coffers and troffers are recessed ceiling areas lit by central or edge lamps. Luminous tubing uses fluorescent lamps or tubes exposed or with simple diffusers to make light lines or patterns. These and other combinations can provide both decorative effects and general illumination. Architects must provide adequate space for lamps and controls when integrating lighting into a structure.
The document discusses various types of interior lighting elements including luminous beams, panels, coffers, tubing, and elements. Luminous beams incorporate light sources in translucent materials to resemble other materials like steel or wood when unlit. Luminous panels are large illuminated areas like skylights, while luminous coffers and troffers are recessed ceiling areas lit by central or edge lamps. Luminous tubing uses fluorescent lamps or tubes exposed or with simple diffusers to make light lines or patterns. These and other combinations can provide both decorative effects and general illumination. Architects must provide adequate space for lamps and controls when integrating lighting into a structure.
Luminous beams incorporate light sources in translucent plastic or glass
forms (Fig. 10-11). When not illuminated they resemble steel, wood, or plaster beams. Luminous panels are large luminous areas resembling skylights (Fig. 10- 12). Luminous coffers or troffers are recessed ceiling areas lighted by centrally or edge placed lamps (Figs. 10-13 and 10-14). Artificial skylighting utilizes luminous panels constructed and installed so as to imitate a natural skylight. In some cases light sources are mounted in a natural skylight for use on dark days or at night (Fig. 10-15). Luminous tubing usually describes hot- or cold-starting, low-current density fluorescent lamps or tubes which are used exposed or with very simple decorative or diffusing mediums to create light lines or patterns on ceilings or side walls (Fig. 10-16). Luminous elements include all of the forms mentioned as well as other unclassified combinations of lamps, diffusing mediums, and structural features that usually provide decorative effects and sometimes contribute substantially to the general illumination. Wherever the lighting equipment is to be planned as an integral part of a structure, it is necessary that the architect provide adequate space to house lamps and control equipment. Figure A-l , Page A-10 provides useful data for estimating the general illumination which may be provided in open interiors by a range of wiring capacities serving various types of light sources and luminaires. FIG. 10-11. Luminous beams.