felmeiel —
ioe fof tf
Date Foren
Sai |seses| pi] POsument ema We
Te Fenians
a
8 $$
dl sion:
seead “ (Common, Indication lights,
neces [Sgro common ots panel.)
Figure 20, Category 2, Electrical documents except ‘List of
drawings’
The description 2 is used as ‘additional description’. The field
should be left empty if'no additional description is needed.
The data in the specification tab is inherited. Usually nothing
should be written to this tab. The electrical documents might
contain some template specific data that needs to be filled in
(Figure 20).
‘sews | Secaens Pan |
Pantha aT SURE PSESSOT Cancegar A
Prgtetet [Gf PACELD TolemoetoBOS
ce Puma aK
cor Praca ean
x
Figure 21 show example of filled Report sheet
The report objects (Figure 21) must be set as following:
- Process drawing templates, the unit folder.
- Device list template, the Module P&! Diagram.
~ Electrical document templates, the ELO1 folder.