Professional Documents
Culture Documents
Content
General Introduction
VF builder configuration
I/O Builder configuration
Tag Builder configuration
General Introduction
VisualField
VisualField
Domain config
VFSysbuilder
Down load
VF Config
Control config
VFExplorer
HMI config
HMI
Publish
General introduction
Configuration server
open
save
..
extended engineer
station
guration
HMI confi
configuration
Process control
configuration
General introduction
extended engineer station
save configuration
configuration server
chief engineer station
1+2+3
2
General introduction
VF
VF builder
builder
chief engineer station
VFExplorer
VFExplorer
extended engineer station
VFLaunch
VFLaunch
operation station/server
VF builder
Domain configuration
1
Create a project
server)
:: File--New
Set the name of the project and the creator.
The default saving path: D:\SUPCON_PROJECT
: Set as default
To set current project as the default project which will be configured
Domain configuration
Domain configuration
2
Domain configuration
Add control domain
Domain configuration
Add control station
Domain configuration
3
Domain configuration
Add operation domain
Domain configuration
Add server or operation node
Domain configuration
4
Engineer
Domain configuration
Add engineer group
Domain configuration
Add engineer
Domain configuration
5
:: Engineering unit
You can add some new engineer units here.
:: Security
Select the level of the tags which need to be acknowledged when
operated in HMI.
Domain configuration
6
Backup project
backup project
:: File
File
The default name: project name +date +time
Control configuration
1
Control configuration
2
Hardware configuration
controller
I/O link
module
IO
module
rack
IO
channel
Control configuration
select the control station, open hardware configuration
Step 1
1
controller configuration
Step 2
2
Main parameter
redundant
process control network
extended IO network
debug (AO\DO)
fast scanning period2050ms)
local rack scanning period
Control configuration
add IO link module
Step 3
3
virtual IO link module: local cabinet
IO link module : local cabinet
remarkSC0, SC1, SC2, ., SC7
Step 44
add cabinet
remarkSC0-0, SC0-1, SC0-2, SC0-3
Step 55
add IO module
Step 66
set IO channel
Control configuration
Standard signal input module(AI711-S)
module configuration parameter
redundancy Yes\No
scanning period200ms \ 50ms
Control configuration
TC signal input module(AI721-S)
module configuration parameter
redundancy Yes\No
scanning period1000ms \ 300ms
Cold junction compensation: on-site (forbid the modify function)/ on-site (allow
the modify function) /remote
Control configuration
RTD signal input module(AI731-S)
module configuration parameter
redundancy Yes\No
Control configuration
Analog signal output module(AO711-S)
module configuration parameter
redundancy Yes\No
Control configuration
Digital signal input module(DI711-S)
module configuration parameter
redundancy Yes\No
signal typepassive contact \ active contact
dithering process: open\ close
Control configuration
Digital signal output module(DO711-S)
module configuration parameter
redundancy Yes\No
Control configuration
scan and upload
upload all the connected hardwareconfirm to delete all the
scanning all
all
current modules
upload the new added hardwareconfirm to
scanning new added
added
re place the current module.
debug status
channel real time data
real time data
data
channel diagnosis data
diagnosis data
data
Control configuration
Add online
Control configuration
3
Tag configuration
Control configuration
tag property setting
Step 3
3
tag name \ description
basic properties
properties
channel properties
properties
AI - address \ run cycle \ signal conversion \ range \ alarm\ fault processing
\ supervision setting
AO - address \ run cycle \ signal conversion \ range \ alarm\ supervision setting
DI- address \ signal conversion \ alarm\ fault processing \ supervision setting
DO- address \ signal conversion \ alarm\ supervision setting
set the configuration of some tag as the type template
the new added
type template
template
template
tag will follow its information.
modify in batch
Control configuration
Analog input tag
basic properties :
range properties:
alarm properties :
Control configuration
Analog output tag
basic properties :
range properties:
alarm properties :
Control configuration
Digital input tag
basic properties : name \ description \ address
alarm properties :ON/OFF status \ positive/negative transition sensing
signal conversion process: input negative: disable/enable
fault processing : hold ON/OFF
Control configuration
Digital output tag
basic properties :
Control configuration
Some other settings
parameter upload \ download
tag debugging
tag usage \ vacant channel\ check tag properties \ check all tags
check
check
Control configuration
4
Compile
Download
Online download
Check the modification of the configuration, then download online.
Thanks