The document discusses scales and engineering curves. It provides examples of a scale ratio of 1:1000 where 6 cm on a drawing represents an actual length of 300 km. It also defines the line of sight (LOS) as the reduction factor (RF) multiplied by the maximum length to be measured, giving an example LOS of 18cm for a RF of 1/5,000,000. The document includes diagrams showing scale lines and curves.
The document discusses scales and engineering curves. It provides examples of a scale ratio of 1:1000 where 6 cm on a drawing represents an actual length of 300 km. It also defines the line of sight (LOS) as the reduction factor (RF) multiplied by the maximum length to be measured, giving an example LOS of 18cm for a RF of 1/5,000,000. The document includes diagrams showing scale lines and curves.
The document discusses scales and engineering curves. It provides examples of a scale ratio of 1:1000 where 6 cm on a drawing represents an actual length of 300 km. It also defines the line of sight (LOS) as the reduction factor (RF) multiplied by the maximum length to be measured, giving an example LOS of 18cm for a RF of 1/5,000,000. The document includes diagrams showing scale lines and curves.