Professional Documents
Culture Documents
Tariel Kapanadze and Tesla Circuits
Tariel Kapanadze and Tesla Circuits
In the next 3 drawings is the basics of how to get the Tesla wireless effect to power loads and self power the system.
It is called,
Next you take a heavy coil of wire connected to a power source of whatever voltage/amperage and whatever
frequency and wrap it around the secondary, let's say 3 turns.
This will impose the primary's voltage and frequency onto the secondary and depending on how many turns are on
the secondary the voltage will climb and the amperage will drop accordingly. So far this is the regular Tesla coil
you are taught to build in school. The capacitance on the ends are: One is the toroid or ball usually on top of the coil
and the other end is the earth (the earth is a huge capacitor).
What they don't tell you is that you can wrap an identical 3 turn 'primary' coil around the secondary (in opposite
phase) and hook it to a load (resistance) like a light or motor as in the drawing 1. All you are doing is dropping the
voltage and power back down to equal the input on the secondary. Whatever the original source of power will drive
(lights, motors)-- the second primary, or third coil will drive.
This is called an 'open' system and the second law of thermodynamics need not apply
because it is designed only for 'closed' systems.
Broken symmetry (open non-thermodynamic power systems) was proven in the 1950's and given a nobel prize in
physics to Dr. Lee.
So skeptics please go and learn what an open system is before showing how ignorant you are about the real
workings of the universe.
This is what drawing 1 would look like in real life in one type of configuration:
Now imagine if you put 4 Secondary primaries around the secondary? What do you think would happen? Do you
think you could power loads at four times the input? Kapanadze did. Or, what if you got rid of the toroid or sphere at
the top of the coil and used a large capacitor in its place and used it instead to drive your loads?
(Don Smith did)
Possible? Absolutely!
Tesla proved it beyond a shadow of a doubt with his experiments and actual use.
In drawing #2 is Tesla's basic setup again except this time the second primary is grounded and seperate to 'receive'
the power thru the agitated earth capacitance.
If the coil in the second primary is the same or 'tuned' (in opposite phase) to the original primary it will produce the
same power or a little more because the equation is:
(pi / 2) * the speed of light!
This is Tesla's wireless power at it's basic denominator similar to drawing 1. Imagine using 4 or 10 secondary
primaries? Can you power loads at 4 or 10 times the input without diminishing the input?
Heck yeah! This is the preliminary to drawing #3.
Going overunity:
(notice the opposite phases)
Tesla said that you had to put the 'node' as near the ground as possible.
That means that you are not trying to radiate sparks from the top of the coil.
It means that you are radiating 5% of the power from the coil and driving 95% of the power to ground.
You accomplish this by having a small capacitance on the coil and using the earth as a huge capacitance.
This is how Tesla 'tuned' his system to the earth resonance.
(This is why you have to ground the Kapanadze/Don Smith systems for power output thru the load)
(Diagram of Tesla's wireless system drawn by himself for R.U.J (Robert Underwood Johnson)
Aug. 14, 1907)
How much simpler do you need to have before your eyes to 'get it'?
High skrool physics has taught you how to waste energy and that you have to buy it from somewhere,
Tesla taught us how to produce it from the ambient background in unlimited quantities with simple stuff that could
be found in a barn.
Which one will you prefer?
Self powering and ending the grip of the middleman at the power company,
or continue paying for it and wasting all your hard earned pay?
It's up to you.
WARNING!!!
Build these projects at your own risk! We are not responsible for errors in the plans, diagrams, or instructions and
other peoples opinions on these projects! Some of these projects deal with very high voltages!! If you are not
familiar with high voltages/amps we recommend that you seek the services of a qualified licensed professional to
help you! High voltages can kill in an instant so be safe and learn all that you can about high voltage safety before
attempting these projects! This website is for information/entertainment purposes only.
Copywrite www.freeenergyinventions.bugs3.com
2011