Professional Documents
Culture Documents
Current Transformer Requirements
Current Transformer Requirements
Page 1 of 4
but at least 20
with
Required minimum effective accuracy limiting
factor
KALF'
IpNom
with
Resulting rated accuracy limiting factor
KALF
RBC
mk:@MSITStore:C:\Siemens\Digsi4\Manager\P7DI\Geratyps\7SJ64x\V4_7\7SJ64X_C.C...
3/24/2010
Page 2 of 4
RBN
RCt
RBN = 5 (5 VA)
so that: 5P10, 5 VA
with
IsNom = secondary transformer nominal current
Class conversion
Conversion into other classes
K 1
KSSC KALF
Calculated as in See ChapterAccuracy limiting factors where:
KSSC KALF
TP depending on power system and specified closing
sequence
mk:@MSITStore:C:\Siemens\Digsi4\Manager\P7DI\Geratyps\7SJ64x\V4_7\7SJ64X_C.C...
3/24/2010
Page 3 of 4
with
Vk
Knee-point voltage
RCt
RBN
IsNom
KALF
Vs.t.max
Val
Dimensioning factor
KSSC
TP
Requirements
mk:@MSITStore:C:\Siemens\Digsi4\Manager\P7DI\Geratyps\7SJ64x\V4_7\7SJ64X_C.C...
3/24/2010
Page 4 of 4
60 / 1
FS =
10
Power
2.5
VA
Class accuracy
Minimum required class accuracy depending on neutral grounding and function
operating principle
Starpoint
Function directional
Class 1
Class 1
Class 1
Class 1
Class 3
For extremely small ground fault currents it may become necessary to correct the angle at the device (see
function description of sensitive ground fault detection).
mk:@MSITStore:C:\Siemens\Digsi4\Manager\P7DI\Geratyps\7SJ64x\V4_7\7SJ64X_C.C...
3/24/2010