Professional Documents
Culture Documents
com
KO-MAG
(
User s Book
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
1.
---------------------------------------
Safety Regulations
2.
---------------------------------------
---------------------------------------
Features
4.
-------------------------------------
----------------------------------------
Operation Process
6.
----------------------------------------
Debubbling process
7.
----------------------------------------
Maintenance
8.
-------------------------------
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
1.
Safety Regulations
For your safety, please read this handbook carefully to be more familiar
with the application and limitations of the machines and the related
potential risks.
A.
Read the instructions before using the equipment
B.
Do not boot the equipment before closing the bin gate
C.
This machine adopts the third grounding method. It is important to
keep the grounding normal. Poor grounding will cause the dangers
towards the machine and user
D.
Electricity Box should not be opened without professional staffs are
present
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
2.
Parameters
AC220V 1500W
Power:
AC110V
AC220V
Selective:
20-30
Work Environment: 20-30
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
3.
Features
*
No Modules Needed, No Debubbling Process Needed
*
Press to Boot, Easy Operation
*
Smart Constant Pressure; Automatic Shift to the Lamination and
Debubbling Mode
*
Connect the power supply can be used; built-in vacuum pump and air
compressor;
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
4.
Inspection and Alignment
4
IC
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
Module Alignment
IC
is
beyond
the
silicone
2
mode2 Open the door in
addition to the bubble machine,
the product put to
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
5.
Operation Process
1
Screen-Pressing Process Mode 1 No Need Remove Bubble
1.
Check whether the connected power
2.
Switch on the power and press the button to boot the equipment
to check that whether the equipment can operate normally or not.
3.
OCA
IC
;
Put the LCD with the OCA glue on the cut silicone (please stagger
the silicone away from the IC position of the flat cable)
4.
;
Open the gate and put the tray on the cabinet
5.
;
Close the cabinet gate
6.
1
Switch to the "mode 1" in the control system
7.
;
Press button to boot the equipment
8.
2~6
;
Wait until the two indicator lights off or the vacuum table turns to
the minimal value. Open the cabinet gate and take out the
product
10.
The process completed, check whether the product is normal or
not.
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
2
Screen-Pressing Process Mode 2
usee
1-5
1.
2
Switch to the "mode 2" in the control system
3.
;
Press button to boot the equipment
40
4.
Wait 40 seconds
5.
;
Wait until the two indicator lights off or the vacuum table turns to
the minimal value. Open the cabinet gate and take out the product
6.
In addition to the bubble machine by pressing the "open" button
7.
0
Wait for the pressure display table is displayed as zero and the
"open" indicator light;
8.
Open the door in addition to the bubble machine, the product put
to
9.
Close and fasten the handle in addition to the bubble machine,
release the "open" button
10.
4-10
6-9
Patiently waiting for 4-10 minutes, then repeat steps 6-9 above, the
product is taken out
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
7.
Maintenance
Projects
Items
Formwork
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
8.
Relation between Vacuum Degree and Altitude
1
Generally, the design and tested parameters of the vacuum pump are
conducted under the standardized air pressure environment. If the
altitude is changing, the exact performance will also change. The exact
parameters are displayed in Table 1.
Altitude
Vacuum Degree
(m)
(-Mpa)
0.1013
760
200
0.0990
742.7
400
0.0968
726.2
500
0.0957
717.9
1000
0.0902
676.7
1500
0.0846
634.7
2000
0.0790
593.3
505.9
1057.5
mmHg
93~95
88~90
Global Cell Phone Repair Parts & Machines Wholesale Online Store - Xicart.com
Panasonic
DP-100
Only need to press the
value shown in Table 1
Main
displayed in Main
Sub
displayed in Sub
0
0 action is needed (no need for operation) to display the present and
reference values.