This document is a course assignment on multiplexing that includes 6 questions. It asks the student to:
1) Calculate the bandwidth required to frequency-division multiplex 20 voice signals with a bandwidth of 4 kHz each.
2) Determine the number of bits per character and number of terminals that can be accommodated by a character-interleaved time-division multiplexer combining 110 bps terminals over a 2400 bps digital line.
3) Calculate the number of 1200 bps computer terminals that can be accommodated by a 1.544 Mbps TDM line reserving 1% for synchronization.
4) Calculate the bit rate on a link multiplexing 5 signal sources of 200 characters/second each with
This document is a course assignment on multiplexing that includes 6 questions. It asks the student to:
1) Calculate the bandwidth required to frequency-division multiplex 20 voice signals with a bandwidth of 4 kHz each.
2) Determine the number of bits per character and number of terminals that can be accommodated by a character-interleaved time-division multiplexer combining 110 bps terminals over a 2400 bps digital line.
3) Calculate the number of 1200 bps computer terminals that can be accommodated by a 1.544 Mbps TDM line reserving 1% for synchronization.
4) Calculate the bit rate on a link multiplexing 5 signal sources of 200 characters/second each with
This document is a course assignment on multiplexing that includes 6 questions. It asks the student to:
1) Calculate the bandwidth required to frequency-division multiplex 20 voice signals with a bandwidth of 4 kHz each.
2) Determine the number of bits per character and number of terminals that can be accommodated by a character-interleaved time-division multiplexer combining 110 bps terminals over a 2400 bps digital line.
3) Calculate the number of 1200 bps computer terminals that can be accommodated by a 1.544 Mbps TDM line reserving 1% for synchronization.
4) Calculate the bit rate on a link multiplexing 5 signal sources of 200 characters/second each with
COSC 5350 Fan NAME:_____________________________________
COURSE ASSIGNMENT V MULTIPLEXING SCORE:______________
SHOW ALL WORK ON THIS HOMEWORK ASSIGNMENT.
DUE DATE: Monday, 30 March 2015
1.
Twenty voice signals are to be multiplexed and
transmitted over twisted pair copper wire. Assuming 4 kHz per voice signal, what is the bandwidth required for frequency-division multiplexing (FDM)?
2.
A character-interleaved time-division multiplexer is
used to combine the data streams of a number of 110-bps asynchronous terminals for data transmission over a 2400-bps digital line. Each terminal sends asynchronous characters consisting of 7 data bits, 1 parity bit, 1 start bit, and 2 stop bits. Assume that one synchronization character is sent every 19 data characters and, in addition, at least 3% of the line capacity is reserved for pulse stuffing to accommodate speed variations from the various terminals. 1) Determine the number of bits per character. 2) Determine the number of terminals that can be accommodated by the multiplexer.
3.
Find the number of 1200-bps computer terminals that
could be accommodated by a TDM line if 1% of the line capacity is reserved for synchronization purposes. Assume the capacity of the line is 1.544 Mbps:
4.
Five signal sources are multiplexed using TDM. Each
source produces 200 characters per second. Assume that there is byte interleaving and that each frame requires 1 bit for synchronization. What is the bit rate on the link?
5.
Draw the TDM frames showing the character data, given
the following information: Four signal Source Source Source Source
6.
sources 1 message: T E G 2 message: A 3 message: 4 message: E F I L
The following figure shows a multiplexer. If the slot is
only 10 bits long (3 bits taken from each output plus 1 framing bit), what is the output bit stream?