Professional Documents
Culture Documents
ECDIS Check-Reporting Form
ECDIS Check-Reporting Form
YES
NO
Preliminary Question
Were you able to load both of the check ENC cells ? Tick YES or NO
YES
NO
Does object
display as in
fig. 2?
Tick YES or NO
(1)
YES
NO
(2)
YES
NO
(3)
YES
NO
(4)
YES
NO
Object
number
Does object
display as in
fig. 3?
Tick YES or NO
(1)
YES
NO
(2)
YES
NO
Question 3
Are the period and range details for the all round light (object (3)) being displayed as
"Q(5) R2s 10M or "Q(5) R2.5S 10M" ? Both are acceptable according to the standards.
Tick YES or NO
YES
NO
If your ECDIS does not show Q(5) R2s 10M or Q(5)R2.5s 10M, please indicate what is shown:
Check 3
Question 4a
Are the underwater features (objects 1 to 8) being displayed as shown in figure 4?
Mark YES even if you see the following additional information: "?", "Rep" or "PA".
This additional information is a capability provided by some manufacturers
that is more than the minimum requirements of the ECDIS Performance Standard.
Object
as numbered
in Fig. 4
Does object
display as in
fig. 4?
Tick YES or NO
(1)
YES
NO
(2)
YES
NO
(3)
YES
NO
(4)
YES
NO
(5)
YES
NO
(6)
YES
NO
(7)
YES
NO
(8)
YES
NO
Question 4b
AUHDnyRWKHU objectV
EHLQJGLVSOD\HG in the
same general area LQ
DGGLWLRQ WRREMHFWV1 to 8
Tick YES or NO
YES
If YES
NO
Question 5
With the display set to "other", "full", or "additional", is the symbol for foul area of seabed safe
for navigation but not for anchoring (REMHFW9) Eeing displayed as shown in fig 5?
Does object
Object
as numbered display as in
fig. 5?
in Fig. 5
Tick YES or NO
YES
(9)
NO
Question 6
:LWKWKHGLVSOD\still VHWWRRWKHUIXOORUDGGLWLRQDO"are the other underwater features (objects 1
to 8 in fig. 4) displayed as in figure 5 ?
Object
as numbered
in Fig. 4
Does object
display as in
figs. 4 and 5?
Tick YES or NO
(1)
YES
NO
(2)
YES
NO
(3)
YES
NO
(4)
YES
NO
(5)
YES
NO
(6)
YES
NO
(7)
YES
NO
(8)
YES
NO
Question 7a
Were you able to successfully change the safety depth setting to 8 metres before conducting the
next set of checks ?
Tick YES or NO
YES
NO
Question 7b
With the safety contour/safety depth set at 8 metres, is the symbol for underwater hazard with a
defined depth (object 10) being displayed as shown in fig 6 ?
It should be a depth of 85 contained in a dotted oval/circle with a blue infill.
Does object
display as in
as numbered
fig. 6?
Object
in Fig. 6
Tick YES or NO
(10)
YES
NO
Question 8
With the safety contour/safety depth still set at 8 metres are all underwater features (objects 1 to 7
and object 9) displayed as in figure 6 ?
Object
as numbered
in Fig. 4 & 5
Does object
display as in
fig. 6?
Tick YES or NO
(1)
YES
NO
(2)
YES
NO
(3)
YES
NO
(4)
YES
NO
(5)
YES
NO
(6)
YES
NO
(7)
YES
NO
(9)
YES
NO
Check 4
Question 9
In voyage planning mode, when you check the direct route between Start and End does the ECDIS
provide any indication or alarm for the six charted objects ?
Also, if the symbols displayed do not match those in figure 7, please provide details.
Object
number
Alarm /
Indication
raised
Tick YES or NO
(1)
YES / NO
(2)
YES / NO
(3)
YES / NO
(4)
YES / NO
(5)
YES / NO
(6)
YES / NO
Final Checks:
Have you completed a form for each different ECDIS using ENCs on board?
Have you any screenshots showing differences from the expected results?
On completion of the checks, did you return the ECDIS settings to the values required for
safe navigation in your ship?
Send the completed form(s) and any
screenshots to:
www.iho.int
Fax: +377 93 10 81 40
email: info@iho.int