Stack Height o tropical storm winds o with uneven slope o Did tipping calculations o Found that at an angle of 4deg with tropical winds can stack 10 high. FEA simulation of panels from both sides by friday. Goal to send out initial quotes tomorrow.
Stack Height o tropical storm winds o with uneven slope o Did tipping calculations o Found that at an angle of 4deg with tropical winds can stack 10 high. FEA simulation of panels from both sides by friday. Goal to send out initial quotes tomorrow.
Stack Height o tropical storm winds o with uneven slope o Did tipping calculations o Found that at an angle of 4deg with tropical winds can stack 10 high. FEA simulation of panels from both sides by friday. Goal to send out initial quotes tomorrow.
Old building renovation in environmentally conscious area Contractor has worked with Stanford before Community project, so all information is public Near BTH in Sweden 6,200m3 concrete and bricks trucked away repurchased 4,200m3 concrete and 12,000m3 infill 2.5 years for project Have pics of deconstruction project, top view layout of project site, stats, etc. Stack Height o Tropical storm winds o With uneven slope o Did tipping calculations o Found that at an angle of 4 with tropical winds can stack 10 high o Planning on designing for 10 high with 2x safety factor o What safety factor does Volvo use? (Martin will ask 2 or 1.8) Panels o BTH Meeting with Professors Downloaded Autodesk Simulation to get better FEA No good feedback from professors.. o Stanford design Corrugated plastic from last week looks really strong, thinking of adding in as support material to metal frame Talking to plastic sales rep on Thursday for material and cost Metal Frame with hinge idea is still our focus Need hinges for bulging, stability Gets rid of top frame Made of aluminum ~37lbs Plastic bolted onto metal frame, allows for replacement if needed o Goal to send out initial quotes tomorrow o FEA simulation of panels from both sides by Friday Base o Stanford Fabric Bottom Worked really well Looking at ways to buy fabric High strength pool cover Loop Loc, looking into contacting them If not just polypropylene Looking for tear resistant fabrics (definitely a concern) Base with metal for extra support
Ratchet straps for release and tightening
Would need two operators to release o BTH Metal Bottom Forklift bottom still (problem is the equipment cant do it for hexagon) All metal will be stronger but super heavy Dont need second operator to release but requires more space to move to new position BTH starting to put together requirements for the system Let Martin know what we need for EXPE from Volvo