Professional Documents
Culture Documents
Fundamentals
Eurocode Design of Multi-story
RC Building
Eurocode Design
g of a Multi-storyy
RC Building
Part I EC2 in Gen
Part
P II Model
M d l & Design
D i Parameters
P
Part III U
ULS
S Member
e be Design
es g
Part IV ULS Member Checks
Part V SLS Member Checks
Fundamentals
Eurocode Design of Multi-story
RC Building
Eurocode Design of
Reinforced Concrete Building
Model
- 6-story Reinforced Concrete
Building
Program
g
Version
V7.4.1
Program License
Registered, Trial
Revision Date
2
2008.07.30
Fundamentals
Eurocode Design of Multi-story
RC Building
Gen provides automatic design for beam, column and shear wall. Isolated footing
design is not applicable to Eurocode 2.
Ultimate limit state and Serviceability limit state design and/or checking.
Static seismic loads and response spectrum function as per Eurocode 8-1: 2004
Fundamentals
Eurocode Design of Multi-story
RC Building
Beam design
The following data are required to be input for Beam design:
z
Bar size
9 Main rebar: Up to 5 sizes simultaneously selected
selected, which GEN will use
to find the most appropriate.
9 Stirrup/Link: One size can be selected.
9 P5,
P5 P6,
P6 P7,
P7 P8,
P8 P9,
P9 P10,
P10 P11,
P11 P12,
P12 P13,
P13 P16,
P16 P20,
P20 P25,
P25 P32,
P32 and
d P40 are
available.
Fundamentals
Eurocode Design of Multi-story
RC Building
Beam design
The following conditions are applied to Beam design:
z
w, min = 0.08 f ck f yk
Fundamentals
Eurocode Design of Multi-story
RC Building
Beam design
The following are the Design results provided by Gen:
Main rebar
z Required rebar area satisfying minimum bar spacing
z Number of bars at top and bottom satisfying minimum bar spacing
z Capacity ratio at I-end,
I end middle
middle, and JJ-end
end of beam member
z Up to two layers of rebar can be designed
Stirrups/Links
z Required rebar area per unit length
z Spacing of stirrups
z Capacity ratio at I-end,
I-end middle
middle, and J-end of beam member
z Check for crushing of compression struts
Fundamentals
Eurocode Design of Multi-story
RC Building
Column design
The following data are required to be input for Column design:
z
Bar size
9 Main rebar: Up to 5 sizes simultaneously selected
selected, among which GEN
will find the most appropriate.
9 Tie/Spiral: One size can be selected.
9 P5,
P5 P6,
P6 P7,
P7 P8,
P8 P9,
P9 P10,
P10 P11,
P11 P12,
P12 P13,
P13 P16,
P16 P20,
P20 P25,
P25 P32,
P32 and
d P40 are
available.
Fundamentals
Eurocode Design of Multi-story
RC Building
Column design
The following conditions are applied to Column design:
z
S cl ,t max = min{20 Dbar , b, h,400 mm, Asw (bw w, min )} w, min = 0.08 f ck f yk
The maximum spacing is reduced by a factor 0.6 at the i and j-end
of the column.
Fundamentals
Eurocode Design of Multi-story
RC Building
Column design
The following are the design results provided by Gen:
Main rebar
z Number of bars satisfying minimum bar spacing
z Capacity ratio for the most critical part among I-end, middle, and J-end
of column member
z Biaxial P-M interaction diagram
Note. Two layers of rebar or bundle bars are not applicable.
Sti
Stirrup/Links
/Li k
z Required rebar area per unit length
z Spacing of ties/spirals
z Capacity ratio for the most critical part of column member (I-end,
middle, and J-end)
z Check for crushing of compression struts
Fundamentals
Eurocode Design of Multi-story
RC Building
Bar size
9 Vertical rebar: Up to 5 sizes simultaneously selected
selected, among which GEN
will find the most appropriate.
9 End rebar: One size can be selected, then program will find the most
pp p
, ggreater than or equal
q
to the one selected.
appropriate,
9 Horizontal rebar: One size can be selected.
9 P5, P6, P7, P8, P9, P10, P11, P12, P13, P16, P20, P25, P32, and P40 are
available.
10
Design method
MIDAS Information Technology Co., Ltd.
Fundamentals
Eurocode Design of Multi-story
RC Building
As , min = 0.002 Ac
z
11
Fundamentals
Eurocode Design of Multi-story
RC Building
12
Fundamentals
Eurocode Design of Multi-story
RC Building
PART II - Contents
The Model File
Performing the Analysis
Design Parameters
ULS Design
13
Fundamentals
Eurocode Design of Multi-story
RC Building
9000 mm
9000 mm
5100 mm 5100
0 mm
7200
0 mm
5100 mm 5100 mm
m
9000 mm
14
Fundamentals
Eurocode Design of Multi-story
RC Building
5000
0 mm
4500 nm
4500 nm
m
15
Fundamentals
Eurocode Design of Multi-story
RC Building
Analysis
1. Analysis > Perform Analysis
16
Fundamentals
Eurocode Design of Multi-story
RC Building
Load Combinations
Design Code
f
Swayy Frame Definitions
Member Assignment
Live Load Reduction Factor Modifications
Unbraced Lengths (L, Lb)
Partial Safety Factors
Concrete and Rebar Properties
17
Fundamentals
Eurocode Design of Multi-story
RC Building
Load Combinations
1. Results > Combinations
4 Option: Add
4.
5. Code Selection: Concrete
6. Design Code: Eurocode2:04
The program
automatically creates
design load
combinations which
can be also modified or
deleted by the user.
3
8
18
Fundamentals
Eurocode Design of Multi-story
RC Building
Design Code
1. Design > Concrete Design Parameter > Design
Code
2
5
6
19
Fundamentals
Eurocode Design of Multi-story
RC Building
Member Assignment
1. Design > General Design Parameter >
Member Assignment
2. Assign Type: Automatic
3. Selection Type: All
3. Click [OK] button.
2
3
Fundamentals
Eurocode Design of Multi-story
RC Building
10
n =
2 + (n 2 ) 0
= 0.82
n
n=5
0 = 0.7
Fundamentals
Eurocode Design of Multi-story
RC Building
3 Reduction
R d i Factor:
F
0.85
0 85
1 3.
12
9. Select Floor.
10 Cli
10.
Clickk [Delete]
[D l t ] button.
b tt
11. Click [Close] button.
12. Click [Apply] button.
10
n =
9
n=4
11
22
2 + (n 2) 0
= 0.85
n
0 = 0.7
Fundamentals
Eurocode Design of Multi-story
RC Building
3 Reduction
R d i Factor:
F
0.9
09
1 3.
12
9. Select Floor.
10 Cli
10.
Clickk [Delete]
[D l t ] button.
b tt
11. Click [Close] button.
12. Click [Apply] button.
8
10
n =
9
n=3
11
23
2 + (n 2 ) 0
= 0. 9
n
0 = 0.7
Fundamentals
Eurocode Design of Multi-story
RC Building
3, 4
7
24
Fundamentals
Eurocode Design of Multi-story
RC Building
25
Fundamentals
Eurocode Design of Multi-story
RC Building
3 Rebar
3.
R b S
Selection
l i Code:
C d EN04(RC)
4. Grade of Main Rebar: Class B
5. Grade of Sub-Rebar: Class A
6. Click [Modify] button.
7. Click [Close] button.
3
4, 5
6
26
Fundamentals
Eurocode Design of Multi-story
RC Building
3
2
4
27
Fundamentals
Eurocode Design of Multi-story
RC Building
10
12
13
9
28
Fundamentals
Eurocode Design of Multi-story
RC Building
17
18
19
20
15
16
29
Fundamentals
Eurocode Design of Multi-story
RC Building
26
21
23
24
25
28
30
27
Fundamentals
Eurocode Design of Multi-story
RC Building
ULS Design
for Design
31
Fundamentals
Eurocode Design of Multi-story
RC Building
32
Fundamentals
Eurocode Design of Multi-story
RC Building
33
Fundamentals
Eurocode Design of Multi-story
RC Building
34
Fundamentals
Eurocode Design of Multi-story
RC Building
35
Fundamentals
Eurocode Design of Multi-story
RC Building
1
1. Red N means that negative moment is larger than the
resistance for the given section.
36
Fundamentals
Eurocode Design of Multi-story
RC Building
7
37
Fundamentals
Eurocode Design of Multi-story
RC Building
10
38
Fundamentals
Eurocode Design of Multi-story
RC Building
1 A
1.
As with
ith Beam
B
we may check
h k [G
[Graphic],
hi ] [D
[Detail]
t il ] &
[Summary] results.
4
39
Fundamentals
Eurocode Design of Multi-story
RC Building
5
40
Fundamentals
Eurocode Design of Multi-story
RC Building
2
41
1 A
1.
As with
ith Beam
B
we may check
h k [D
[Detail]
t il ] &
[Summary] results.
2. As with Column we may Draw PM Curve.
MIDAS Information Technology Co., Ltd.
Fundamentals
Eurocode Design of Multi-story
RC Building
42
Fundamentals
Eurocode Design of Multi-story
RC Building
Enter Rebar Data using Design > Concrete Design Parameter > Modify
Beam/Column/Wall Section Data or Design > Concrete Code
1
Design > Beam/Column/Wall Design > [Update Rebar] button
button
1. In this tutorial, Modify Beam Section Data will only be illustrated. In the same manner, Column and Wall
Section Data can also be defined.
1. Rebar will be MANUALLY entered using Design > Concrete Design Parameter > Modify
Beam/Column/Wall Section Data
1. Rebar can be AUTOMATICALLY entered usingg Design
g > Concrete Code Design
g > Beam/Column/Wall
Design > [Update Rebar] button (this is illustrated later).
43
Fundamentals
Eurocode Design of Multi-story
RC Building
7
9
44
Fundamentals
Eurocode Design of Multi-story
RC Building
45
Fundamentals
Eurocode Design of Multi-story
RC Building
46
Fundamentals
Eurocode Design of Multi-story
RC Building
1.
1 In
I this
hi tutorial,
i l only
l B
Beam C
Code
d Ch
Checking
ki will
ill be
b
illustrated. In the same manner, Column/Wall Code
Checking can be performed.
47
Fundamentals
Eurocode Design of Multi-story
RC Building
2. Sorted by:
y Member
3. Results: Strength
4. Click
5. SEL: MEMB 11
9
4
7
48
Fundamentals
Eurocode Design of Multi-story
RC Building
49
Fundamentals
Eurocode Design of Multi-story
RC Building
50
Fundamentals
Eurocode Design of Multi-story
RC Building
51
Fundamentals
Eurocode Design of Multi-story
RC Building
52
Fundamentals
Eurocode Design of Multi-story
RC Building
3 Click
3.
Cli k
button.
b
53
Fundamentals
Eurocode Design of Multi-story
RC Building
54
Fundamentals
Eurocode Design of Multi-story
RC Building
2
3
4
55
Fundamentals
Eurocode Design of Multi-story
RC Building
1. In this ppage,
g , check the Rebar Data entered
using [Update Rebar] in the previous page.
2. In signifies that Rebar are placed.
3. The entered Rebar Data are displayed.
3
56
Fundamentals
Eurocode Design of Multi-story
RC Building
11
13
12
14
8
9
15
57
Fundamentals
Eurocode Design of Multi-story
RC Building
SLS Checks
1 Serviceability
1. Serviceability check is provided for Beam members for the following limit states.
- Stress limitation
- Crack control
- Deflection control
58
Fundamentals
Eurocode Design of Multi-story
RC Building
2
3
7
6
59
8
4
Fundamentals
Eurocode Design of Multi-story
RC Building
60
Fundamentals
Eurocode Design of Multi-story
RC Building
61
Fundamentals
Eurocode Design of Multi-story
RC Building
62