Professional Documents
Culture Documents
DARVol1 2013
DARVol1 2013
All rights reserved. No part of this publication, either in English or in Hindi, may be reproduced in any form or by
any means, electronic or mechanical including photocopy, recording or any information storage and retrieval
system, without permission, in writing, from the Director General, CPWD, New Delhi.
This Analysis of Rates for Delhi is prepared for the use of CPWD. However, this may be used by other
Govt. departments, PSUs, private bodies & individuals also at their own discretion. CPWD shall not be
responsible for any ambiguity, discrepancy, dispute or financial loss, arising directly or indirectly by using or
following items of CPWD Analysis of Rates for Delhi by such Govt./Private bodies or individuals.
A GOVERNMENT OF INDIA PUBLICATION
Published by
DIRECTOR GENERAL
CPWD, NIRMAN BHAWAN, NEW DELHI-110 011
Printed & Marketed by
JAIN BOOK AGENCY
Authorised Dealers of Govt. Publications
C-9, Connaught Place, New Delhi-110001
Phone : 44556677 Fax : 41513850
E-mail : sales@jainbookagency.com
Website : www.jainbookagency.com
Distributed by
JBA DISTRIBUTORS
N-67, First Floor, Munshiram Building,
Connaught Place, New Delhi-110001
Phones : 23354824, 43528601
E-mail : sales@jba.in
Website : www.jba.in
DIAL-A-BOOK
011-4175 8700
Price : Rs. 3000/- per set of two volumes (excluding postage and forwarding charges etc.)
FOREWORD
(V.K.Gupta)
DIRECTOR GENERAL, CPWD
New Delhi
June 2013
PREFACE
1. C.P.W.D. Analysis of Rates for Delhi 2013 is the revised edition of C.P.W.D.
Analysis of Rates for Delhi 2012 after adding the analysis of DSR-2012 Supplement
(Green Building and New Technology items).
2. Analysis of Rates for Delhi 2013 incorporates most of the analysis of items of
Analysis of Rates for Delhi 2012 and supplement with updated correction slips,
including analysis of existing items and also corresponding new items introduced in
DSR 2013.
3. Analysis of Rates for Delhi, 2013 is published in two volumes i.e. volume I & II as
under:
Volume
Number
One
Two
Sub-head No.
Content/ Sub-head
00
01
02
03
04
05
06
07
08
09
10
11
12
Basic Rates
Carriage of materials
Earth Work
Mortars
Concrete Work
Reinforced Cement Concrete
Brick Work
Stone Work
Marble & Granite Work
Wood and PVC Work
Steel Work
Flooring
Roofing
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Finishing
Repairs to Buildings
Dismantling and Demolishing
Road Work
Sanitary Installations
Water Supply
Drainage
Pile work
Aluminium Work
Water Proofing
Horticulture and Landscaping
Rain Water Harvesting & Tube wells
Conservation of Heritage buildings.
Structural Glazing and Composite
Aluminium Panel
4.
Analysis of few existing items which are either obsolete or are not in use, have been
deleted. Similarly, analysis of many items have been modified to correspond to
items of DSR 2013. Several new analysis and sub items have been introduced in
Analysis of Rates for Delhi 2013 after incorporating DSR-2012 Supplement.
5.
Items related to Green building concepts, new technology items have also being
added in the Analysis of Rates for Delhi 2013.
6. Analysis of Rates for Delhi, 2013 is based on the study of current market rates of
materials at Delhi, collected during the period of Jan- March 2013. The basic rates of
materials, incorporated in the analysis, pertain to materials conforming to BIS
Standards/ CPWD Specifications/Materials of good quality generally available in the
market. Labour rates are the minimum wages issued by the Government of Delhi
w.e.f. 01.04.2013.
7.
The nomenclatures of main items have been printed along with the analysis of first
Sub item only to conserve the space and number of pages.
8.
Sundries have been considered as 1.70 times based on Cost Index of Delhi as 100
over PAR 2007.
9.
A lot of effort has gone into the preparation of this Analysis of Rates for Delhi - 2013,
I convey my deep appreciation and sincere thanks to Shri Mathura Prasad, SE(TAS),
Shri A.P. Mathur, SE(QA), Shri R.K. Saraswat, EE-I (TAS), Shri R.K.Vashisth, AE,
Shri Chhabilal Singh, AE, Shri R.K.Goel, JE, Shri Abhishek Kumar, JE, Shri Ram
Janam Chaudhary, JE, Shri Kashinath Ratha, JE, Shri Vijay Singh, Estimator, Shri
Bahal Singh, Estimator and other officers and staff of TAS unit for sincere efforts
made in the preparation of this document in such a short time. Various field units,
who contributed field inputs, also deserve appreciation for their timely help.
10. I also express my sincere thanks to Shri V.J. Reddy EE(P), Hyderabad Central
Circle-II, CPWD who has contributed & helped in finalizing the DAR in addition of
his normal duties.
11. Due care has been taken to print the C.P.W.D. Analysis of Rates for Delhi as
correctly as possible. It is, however possible that some errors might have crept in. In
case any error or omission is noticed, it may be brought to the notice of the
Superintending Engineer (TAS), CPWD, Room no. 418, A-wing, Nirman Bhawan,
New Delhi.
(V.K.Rokade)
ADG (TD), CPWD,
Nirman Bhawan, New Delhi.
New Delhi
June, 2013
C O N T E N T S
Vol. 1
SH. No.
NAME OF SUB-HEAD
PAGE No.
BASIC RATES
0.1
3-5
0.2
LABOUR
6-7
0.3
MATERIALS
0.4
CARRIAGE CODES
8-55
56-58
SUB -HEADS
1.
Carriage of Materials
2.
Earth Work
3.
Mortars
115-124
4.
Concrete Work
125-164
5.
165-244
6.
Brick Work
245-278
7.
Stone Work
279-336
8.
337-350
9.
351-547
10.
Steel Work
549-586
11.
Flooring
587-658
12.
Roofing
659-734
59-68
69-114
BASIC
RATES
BASIC RATES
0.1 HIRE CHARGES OF PLANTS
Code
No.
Description
Unit
Rate
0001
day
830.00
0002
day
800.00
0003
day
1500.00
0004
cum
350.00
0005
day
1700.00
0006
day
250.00
0007
day
300.00
0008
Hire charges of Barber green, drying, mixing and Asphalt Plant, with
accessories, capacity 30/45 tonne
day
7700.00
cum
150.00
0010
day
800.00
0011
day
550.00
0012
day
325.00
0013
day
350.00
0014
day
5000.00
0016
Mastic Cooker
day
750.00
0017
day
1700.00
0018
day
5000.00
0019
day
230.00
0020
day
8000.00
0021
Pin vibrator
day
325.00
0022
Surface Vibrator
day
400.00
0023
day
4000.00
0024
Hire and running charges of hydraulic piling rig with power unit etc.
including complete accessories and shifting at site
day
34000.00
0025
day
2200.00
0026
day
4200.00
0027
day
35000.00
0028
day
9300.00
0029
0030
day
2200.00
0033
Paint applicator
day
750.00
0037
Mobile crane
day
6500.00
0009
km/cum
30.00
Code
No.
Description
Unit
Rate
0038
day
1350.00
0039
day
1500.00
0040
Air compressor 250 cfm with two leads for pneumatic cutters /
hammers
day
1900.00
0041
day
1000.00
0042
day
10000.00
0043
Road sweeper
day
550.00
0045
day
13000.00
0046
day
1000.00
0047
day
900.00
0048
Texturing machine
day
925.00
Dozer D-80-A 12
hour
3800.00
0050
hour
2450.00
0051
hour
1300.00
0052
hour
800.00
0053
Tipper -5 Cum
0054
hour
1500.00
0055
hour
460.00
0056
hour
1150.00
0057
hour
150.00
0058
Air compressor
hour
325.00
0059
hour
1200.00
0060
hour
360.00
0061
hour
800.00
0062
hour
23700.00
0063
hour
17500.00
0064
hour
2700.00
0065
hour
1000.00
0066
hour
2500.00
0068
hour
2900.00
0069
hour
900.00
0070
hour
700.00
0071
0075
tonne km
tonne km
hour
3.00
3.00
360.00
Code
No.
Description
Unit
Rate
0076
hour
14000.00
day
7500.00
0081
day
3000.00
0082
sqm
1500.00
0080
Note :- Above hire - charges (from item code 0049 to 0082) include cost of services of operating staff, supply of lubricating oil
and diesel also.
BASIC RATES
0.2 LABOUR
Note :- These rates are exclusive of contractor's profit and over heads and are inclusive of wages for weekly
day of rest
Code
No.
Description
Unit
Rate
0100
Bandhani
day
328.00
0101
Bhisti
day
328.00
0102
Blacksmith 1 st class
day
393.00
0103
day
361.00
0111
Carpenter 1 st class
day
393.00
0112
day
361.00
0113
Chowkidar
day
297.00
0114
Beldar
day
297.00
0115
Coolie
day
297.00
0116
Fitter (grade 1)
day
393.00
0117
day
361.00
0119
Glazier
day
361.00
0122
day
393.00
0123
day
393.00
0124
day
361.00
0125
day
361.00
0126
day
393.00
0127
day
393.00
0128
Mate
day
328.00
0130
Mistry
day
393.00
0131
Painter
day
361.00
0132
Rock Excavator
day
297.00
0133
Rock Breaker
day
297.00
0134
day
297.00
0135
Stone Chiseller
day
328.00
0138
day
328.00
0139
day
328.00
0141
White Washer
day
328.00
Code
No.
Description
Unit
Rate
0155*
Mason (average)
day
377.00
0156*
Carpenter (average)
day
377.00
0157
day
350.00
0159
day
393.00
0160
Technician
day
700.00
0161
Helper (Technician)
day
300.00
Note :- * These rates are average of 1st class and 2nd class
categories. This is for use in the analysis of rate only.
BASIC RATES
0.3 MATERIALS
Note :- These rates are exclusive of contractor's profit, over heads and carriage but include octroi, royalty,
sales tax (VAT) etc.
Code
No.
Description
Unit
Rate
0222
0223
10 Nos
40.00
sqm
250.00
metre
210.00
metre
210.00
metre
200.00
metre
300.00
metre
225.00
each
175.00
metre
310.00
each
410.00
metre
410.00
0233
pair
160.00
0234
each
each
550.00
250.00
sqm
200.00
sqm
cum
cum
cum
cum
cum
cum
cum
cum
cum
cum
cum
metre
250.00
500.00
500.00
510.00
1000.00
1000.00
1000.00
1050.00
1200.00
1050.00
1050.00
1100.00
42.00
0224
0225
0226
0227
0228
0229
0230
0231
0232
0235
0236
0237
0285
0286
0287
0291
0292
0293
0294
0295
0296
0297
0298
0302
Code
No.
Description
0303
0304
0305
0308
0309
0310
0312
0313
Cowdung
Bajri
Bamboo 25 mm dia 2.5 metre long
Bhusa
Paving bitumen of grade VG-10 of approved quality
Bitumen emulsion
Bitumen grade PMB - 40
Blown type petroleum bitumen of penetration 85/25 of approved
quality
Bitumen hot sealing compound : grade A
Bitumen solution primer of approved quality
Premoulded joint filler 12 mm thick
Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I
Bitumen felt as per IS 7193 Grade II
Bitumen felt :Type 3 grade 1
Separation Membrane of impermeable plastic sheeting 125 micron
thick
Coal Tar
Blasting powder
Blasting fuse (fuse wire)
White face insulating board:12 mm thick
Natural colour insulating board:12 mm thick
Flame retardant face insulating board: 12 mm thick
0314
0316
0317
0318
0319
0322
0323
0324
0325
0326
0328
0332
0336
0339
0341
0346
0347
Unit
0348
Extra for veneered particle board with Teak veneering both sides
0349
0362
0364
0365
0367
0368
0369
0370
0371
0373
0374
Curing compound
Brick bats
Wire brush
Soft brush
Portland Cement
White Cement
Plastic sheath,1.25 mm thick for dowel bars
Coal (steam)
Sealant primer
Cramp Gun metal 25x6x300 mm
Pre moulded Joint filler, 25 mm thick for expansion joint.
Rate
cum
cum
score
quintal
tonne
tonne
tonne
48.00
1000.00
350.00
400.00
40000.00
30000.00
41400.00
tonne
kilogram
litre
sqm
sqm
sqm
sqm
37000.00
26.00
45.00
350.00
60.00
76.00
60.00
sqm
litre
kilogram
each
sqm
sqm
sqm
12.00
30.00
35.00
15.00
360.00
270.00
315.00
sqm
350.00
sqm
325.00
sqm
260.00
sqm
170.00
sqm
500.00
litre
cum
each
each
tonne
tonne
sqm
quintal
kg
each
sqm
50.00
500.00
20.00
18.00
5240.00
14000.00
30.00
400.00
125.00
80.00
500.00
Code
No.
Description
0378
0379
0380
0381
0382
0383
0384
0385
0386
0387
0388
0389
0390
0391
0392
0393
0394
0400
0401
0402
0403
0404
0405
0406
0408
0409
0410
0411
0412
0413
0414
0417
0418
0419
0420
0421
0422
0423
0424
0425
Unit
10
Rate
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
850.00
700.00
430.00
180.00
3100.00
2750.00
950.00
2850.00
2500.00
2300.00
1750.00
310.00
270.00
170.00
500.00
370.00
320.00
230.00
180.00
145.00
95.00
150.00
130.00
90.00
140.00
130.00
100.00
165.00
160.00
each
each
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
370.00
320.00
170.00
750.00
700.00
645.00
620.00
525.00
50.00
each
135.00
each
110.00
Code
No.
Description
0426
0427
0428
0429
0430
0431
0432
0433
0438
0442
0444
0445
0446
0447
0449
0450
0451
0452
0453
0524
0525
0526
0527
0528
0555
0556
0557
0558
0568
0569
0570
0571
0583
0584
0585
0586
0587
0588
Unit
11
Rate
each
each
10Nos
10 Nos
each
10 Nos
10 Nos
10Nos
each
each
metre
metre
each
each
100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
100.00
125.00
175.00
195.00
40.00
775.00
650.00
560.00
495.00
310.00
115.00
135.00
42.00
35.00
210.00
170.00
135.00
95.00
90.00
10 Nos
10 Nos
1000.00
850.00
10Nos
10Nos
10Nos
each
each
each
700.00
460.00
200.00
175.00
150.00
130.00
each
each
540.00
95.00
each
150.00
each
130.00
each
each
each
100 Nos
100Nos
100 Nos
100 Nos
115.00
530.00
48.00
240.00
200.00
155.00
120.00
Code
No.
Description
0589
0590
0591
0592
0594
0595
0596
0597
0608
0635
0637
0638
0639
0640
0641
0642
0643
0644
0645
0646
0647
0648
0649
0650
0651
0652
0653
0654
0655
0656
0660
0661
0662
0663
0664
0665
0666
0667
Unit
12
Rate
100 nos
metre
metre
metre
100.00
190.00
260.00
350.00
10 Nos
140.00
10Nos
85.00
10 nos
60.00
10 Nos
50.00
metre
100 Nos
100 nos
100 nos
100 Nos
100 Nos
40.00
65.00
50.00
40.00
35.00
30.00
each
10 Nos
10 Nos
10 Nos
7.00
140.00
90.00
65.00
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
each
each
each
each
metre
each
each
each
each
each
each
each
each
55.00
340.00
315.00
235.00
200.00
115.00
110.00
90.00
115.00
110.00
90.00
45.00
95.00
90.00
48.00
40.00
45.00
40.00
30.00
25.00
Code
No.
Description
0668
0669
0670
0679
0680
0681
0682
0683
0684
0685
0686
0687
0688
0689
0690
0691
0692
0693
0694
0696
0697
0698
0699
0700
0701
0702
0703
0704
0705
0706
0713
0714
0715
0717
0718
0719
0752
Unit
13
Rate
each
each
each
10 Nos
10 Nos
10 Nos
100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
19.00
16.00
15.00
125.00
100.00
75.00
75.00
60.00
55.00
45.00
35.00
570.00
530.00
520.00
500.00
510.00
500.00
470.00
390.00
160.00
130.00
750.00
600.00
480.00
380.00
300.00
500.00
380.00
320.00
130.00
sqm
1700.00
sqm
1550.00
sqm
1400.00
sqm
1150.00
sqm
1000.00
sqm
sqm of
door area
900.00
300.00
Code
No.
Description
Unit
0753
0754
0755
0757
0759
0761
0763
0765
0768
0769
0770
0771
0773
0775
0776
0777
0784
0785
0788
0801
0802
0803
0804
0805
0806
0807
0808
0809
0810
0811
0815
0816
0818
0820
0821
0823
14
Rate
sqm of
door area
sqm of
door area
sqm of
door area
sqm of
door area
sqm
quintal
kilogram
sqm
sqm
sqm
sqm
litre
quintal
quintal
quintal
quintal
cum
quintal
quintal
litre
85.00
420.00
500.00
68.00
25.00
210.00
180.00
150.00
45.00
300.00
480.00
300.00
230.00
1000.00
200.00
200.00
200.00
Kg
litre
38.00
250.00
litre
350.00
litre
220.00
litre
120.00
litre
130.00
litre
kilogram
cum
cum
kilogram
kilogram
litre
litre
litre
litre
60.00
40.00
450.00
60.00
36.00
45.00
110.00
90.00
90.00
90.00
115.00
180.00
310.00
Code
No.
Description
Unit
Rate
0824
0826
0827
0828
0829
0830
0831
0833
0834
kg
litre
litre
litre
litre
litre
litre
litre
24.00
130.00
150.00
90.00
95.00
160.00
120.00
130.00
litre
litre
litre
kilogram
kilogram
kilogram
litre
litre
litre
litre
kilogram
kilogram
kg
kilogram
each
each
kilogram
140.00
180.00
120.00
90.00
45.00
200.00
75.00
125.00
125.00
80.00
30.00
125.00
7.00
4.00
10.00
10.00
55.00
kilogram
kilogram
75.00
65.00
each
each
kilogram
each
sqm
metre
each
each
25.00
325.00
270.00
35.00
1250.00
600.00
280.00
330.00
sqm
550.00
sqm
cum
580.00
30.00
0835
0845
0850
0851
0855
0856
0857
0858
0859
0863
0865
0868
0869
0870
0873
0874
0875
0876
0886
0966
0967
0969
0973
0974
0975
0976
0977
0978
0979
15
Code
No.
Description
0980
0982
0983
0992
0994
0996
0999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1013
1015
1019
1020
1021
1022
1023
1024
1025
1028
1029
1030
1031
1032
1034
1035
1036
1143
1145
Unit
16
Rate
cum
cum
cum
quintal
sqm
sqm
kilogram
litre
kilogram
quintal
quintal
quintal
quintal
quintal
quintal
quintal
quintal
quintal
90.00
1120.00
650.00
5200.00
125.00
150.00
210.00
70.00
40.00
4500.00
4300.00
4500.00
4700.00
4500.00
4650.00
4200.00
4500.00
4700.00
kg
quintal
sqm
each
quintal
sqm
48.00
4900.00
290.00
35.00
5000.00
430.00
10 Nos
10 Nos
25.00
110.00
each
10 Nos
each
quintal
each
12.00
30.00
70.00
5200.00
17.00
each
each
quintal
quintal
each
metre
metre
25.00
20.00
5600.00
5600.00
40.00
25.00
100.00
Code
No.
Description
1149
1151
1154
1157
1158
1159
1160
1161
1163
1164
1165
1166
1168
1169
1174
1175
1177
1179
1182
1186
1187
1188
1189
1190
1194
1196
1197
1198
1199
1200
1201
1202
1203
1204
1207
1208
1209
1210
1211
1213
1214
Unit
17
Rate
metre
each
100 Nos
cum
cum
cum
10 cudm
10 cudm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
sqm
cum
cum
cum
9.00
60.00
1200.00
700.00
450.00
1000.00
65.00
70.00
300.00
160.00
180.00
130.00
290.00
210.00
172.00
225.00
925.00
950.00
700.00
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
sqm
sqm
sqm
1100.00
800.00
850.00
660.00
725.00
500.00
310.00
260.00
260.00
520.00
650.00
260.00
240.00
220.00
sqm
100 nos
100 Nos
100 Nos
100 Nos
100Nos
kilogram
cm
482.00
35.00
30.00
35.00
32.00
30.00
32.00
2.00
Code
No.
Description
1215
1216
1219
1220
1221
1222
1224
1225
1227
1228
1229
1231
1234
1235
1237
1238
1239
1240
1241
1242
1243
1244
1245
1301
1304
1305
1307
1309
1314
1315
1330
1331
1332
1334
1335
1336
1337
1339
1340
1342
1343
Unit
18
Rate
cm
quintal
kilogram
sqm
quintal
each
quintal
quintal
sqm
sqm
sqm
10 cudm
metre
litre
1.80
500.00
60.00
45.00
5800.00
130.00
5500.00
4450.00
325.00
285.00
250.00
140.00
135.00
48.63
metre
10 cudm
sqm
9.00
140.00
1695.00
sqm
kg
sqm
kg
kg
litre
quintal
each
each
each
pair
each
each
each
each
each
each
each
each
each
each
each
each
each
3330.00
70.00
1050.00
34.00
34.00
16.00
1750.00
125.00
210.00
250.00
70.00
40.00
40.00
35.00
20.00
18.00
28.00
30.00
44.00
50.00
210.00
225.00
210.00
280.00
Code
No.
Description
1350
1352
1353
1354
1355
1356
1357
1360
1361
1362
1363
1364
1366
1367
1369
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1392
1396
1397
1464
1466
1468
1470
1472
1532
1533
1534
1535
Unit
19
Rate
each
each
each
each
each
each
each
each
each
each
pair
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
kilogram
quintal
quintal
quintal
quintal
metre
30.00
300.00
225.00
1500.00
1000.00
4750.00
2300.00
140.00
160.00
220.00
100.00
15.00
25.00
30.00
18.00
15.00
18.00
20.00
20.00
25.00
40.00
45.00
50.00
73.00
92.00
110.00
125.00
310.00
700.00
90.00
3600.00
3700.00
5500.00
5800.00
335.00
each
270.00
each
400.00
each
520.00
each
600.00
Code
No.
Description
1540
Flush pipe and spreaders G.l. for single set of one squatting plate
urinal
Flush pipe and spreaders G.l. for range of two squatting plates urinal
Flush pipe and spreaders G.l. for range of three squatting plates urinal
Flush pipe and spreaders G.l. for range of four squatting plates urinal
G.I. pipes 15 mm dia
G.I. pipes 20 mm dia
G.I. pipes 25 mm dia
G.I. pipes 32 mm dia
G.I. pipes 40 mm dia
G.I. pipes 50 mm dia
G.I. pipes 65 mm dia
G.I. pipes 80 mm dia
G.I. back (jam) nuts 25 mm dia
G.I. back (jam) nuts 65 mm dia
G.I. tees (equal) 25 mm
G.I. tees (equal) 65 mm
G.I. inlet connection
S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
75 mm dia
S.C. I. soil, waste and vent single socketed pipe 1.80 metres
long: 100 mm dia
S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
150 mm dia
1541
1542
1543
1545
1546
1547
1548
1549
1550
1551
1552
1555
1559
1608
1612
1614
1616
1617
1618
1620
1621
1622
1624
1625
1627
1628
1630
1631
1633
1634
1636
1637
1639
1640
1641
1642
1643
1644
20
Unit
Rate
each
each
each
each
metre
metre
metre
metre
metre
metre
metre
metre
each
each
each
each
each
175.00
250.00
300.00
390.00
85.00
110.00
150.00
180.00
220.00
275.00
365.00
460.00
10.00
22.00
45.00
280.00
65.00
each
950.00
each
1150.00
each
1750.00
each
each
each
each
each
each
each
each
each
each
each
each
170.00
350.00
600.00
200.00
252.00
265.00
450.00
278.00
376.00
346.00
520.00
425.00
each
each
each
each
each
each
each
550.00
151.00
190.00
55.00
75.00
85.00
120.00
Code
No.
Description
Unit
Rate
1645
1646
1647
1648
1649
each
each
each
each
185.00
220.00
430.00
510.00
1653
1656
1659
1662
1666
1667
1669
1670
1672
1673
1674
1677
1682
1683
1685
1686
1687
1688
1689
1690
1693
1700
1701
1702
1703
1704
1705
1706
21
per litre
4.50
each
370.00
each
400.00
each
550.00
each
each
each
550.00
220.00
250.00
each
320.00
each
410.00
each
410.00
each
550.00
each
495.00
each
each
each
each
each
570.00
275.00
400.00
113.00
143.00
each
30.00
each
35.00
each
35.00
each
each
metre
metre
metre
metre
metre
metre
metre
48.00
670.00
200.00
210.00
260.00
300.00
400.00
580.00
920.00
Code
No.
Description
Unit
Rate
1707
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
metre
metre
metre
metre
metre
metre
each
each
each
each
each
each
each
each
each
each
each
each
each
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
1050.00
1170.00
1280.00
1590.00
1875.00
1925.00
30.00
35.00
50.00
55.00
100.00
115.00
140.00
150.00
200.00
235.00
280.00
300.00
350.00
1496.00
1995.00
3150.00
3885.00
5040.00
9450.00
1733.00
2310.00
4595.00
5565.00
1738
1739
1854
1855
1856
1857
1858
1859
1863
1871
1872
1875
metre
metre
each
each
each
each
each
each
each
each
each
6510.00
13650.00
50.00
80.00
135.00
170.00
220.00
240.00
1350.00
820.00
1525.00
each
330.00
22
Code
No.
Description
1876
Black plastic seat (solid) with lid C.P. brass hinges and rubber
buffers
Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia
Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia
Spun yarn
Strainer brass 40 mm dia 1.5 metre long
15 mm C.P. brass tap
C.P. brass toilet paper holder of standard size
C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 50 mm dia
C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 80 mm dia
C.P. brass trap 40 mm dia
100 mm S.C.I. trap with vent heel
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet
S.W. gully trap P type 100x100 mm
S.W. gully trap P type 150x100 mm
S.W. gully trap P type 180x150 mm
Vitreous china lipped front urinal
Vitreous china squatting plate urinal
H.P. or L.P. ball valve with polythene floats: 15 mm dia
H.P. or L.P. ball valve with polythene floats: 20 mm dia
H.P. or L.P. ball valve with polythene floats: 25 mm dia
Brass full way valve with C.I. wheel (screwed end) 25 mm dia
Brass full way valve with C.I. wheel (screwed end) 32 mm dia
Brass full way valve with C.I. wheel (screwed end) 40 mm dia
Brass full way valve with C.I. wheel (screwed end) 50 mm dia
Brass full way valve with C.I. wheel (screwed end) 65 mm dia
Brass full way valve with C.I. wheel (screwed end) 80 mm dia
Gunmetal non-return valve-horizontal (screwed end) 25 mm dia
Gunmetal non-return valve-horizontal (screwed end) 32 mm dia
Gunmetal non-return valve-horizontal (screwed end) 40 mm dia
Gunmetal non-return valve-horizontal (screwed end) 50 mm dia
Gunmetal non-return valve-horizontal (screwed end) 65 mm dia
Gunmetal non-return valve-horizontal (screwed end) 80 mm dia
C.I. sluice valve (with caps) class I: 100 mm dia
C.I. sluice valve (with caps) class I : 125 mm dia
C.I. sluice valve (with caps) class I: 150 mm dia
C.I. sluice valve (with caps) class I : 200 mm dia
C.I. sluice valve (with caps) class I : 250 mm dia
C.I. sluice valve (with caps) class I: 300 mm dia
Vitreous china flat back wash basin 630x450 mm
1878
1879
1881
1882
1885
1889
1891
1893
1895
1896
1897
1898
1900
1902
1904
1913
1915
1922
1923
1924
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1940
1941
1942
1943
1944
1945
1947
Unit
23
Rate
each
each
each
kilogram
each
each
each
310.00
50.00
60.00
50.00
600.00
210.00
170.00
each
170.00
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
225.00
150.00
315.00
275.00
218.00
90.00
130.00
225.00
460.00
760.00
210.00
305.00
330.00
350.00
410.00
480.00
620.00
1080.00
1620.00
330.00
450.00
560.00
820.00
1490.00
2120.00
2410.00
2600.00
3600.00
7500.00
10980.00
15500.00
725.00
Code
No.
Description
Unit
Rate
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
725.00
425.00
80.00
95.00
450.00
780.00
700.00
12.00
12.00
15.00
15.00
16.00
18.00
28.00
32.00
38.00
each
pair
cum
1000 Nos
1000 Nos
metre
metre
kg
each
each
each
each
each
metre
metre
1300.00
100.00
7.75
4800.00
5250.00
228.00
323.00
275.00
67.00
88.00
130.00
192.00
231.00
4500.00
4800.00
metre
kg
metre
metre
metre
5000.00
150.00
4500.00
5000.00
5400.00
sqm
330.00
sqm
500.00
sqm
700.00
1970
1980
1984
1986
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
24
Code
No.
Description
2409
2410
2411
2412
2413
2414
2447
2449
2451
2452
2453
2454
2455
2456
2459
2464
2465
2466
2467
2468
2469
2470
2471
2480
2481
2483
2484
2485
2486
2487
2488
2489
2500
25
Unit
Rate
metre
metre
metre
sqm
sqm
sqm
metre
3400.00
3700.00
4000.00
360.00
580.00
700.00
35.00
each
each
each
each
each
each
50.00
70.00
75.00
80.00
100.00
65.00
each
each
590.00
25.00
each
each
10 cudm
50.00
50.00
325.00
each
each
each
each
each
sqm
165.00
65.00
75.00
85.00
110.00
1030.00
sqm
840.00
sqm
920.00
sqm
691.90
sqm
922.50
sqm
1198.15
sqm
641.25
sqm
metre
10 cudm
860.65
28.55
100.00
Code
No.
Description
2504
2505
2506
2507
2508
2509
2510
2602
2603
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
Unit
26
Rate
cum
10 cudm
730.00
370.00
10 nos
250.00
10nos
293.00
10 nos
364.00
10 Nos
450.00
10 Nos
1000 Nos
1000 Nos
metre
metre
each
each
kg
kg
kg
each
each
each
metre
kg
sqm
sqm
each
pair
each
each
each
each
each
sqm
each
cartridge
sqm
570.00
4800.00
3500.00
31.60
18.00
459.15
143.20
100.00
601.25
160.00
110.95
35.00
5.00
25.00
66.00
1910.00
770.00
145.00
1570.80
39.35
102.70
38.25
294.95
136.55
230.00
10.00
135.00
250.00
Code
No.
Description
2630
2631
2632
2634
2704
2708
2709
2710
Baker rod
4 mm thick ACP
Fire Stop
GI/Aluminium Sheet (0.8 mm thick)
Aluminium Strip 40 mm wide and 2 mm thick
Truf Paver (500 x 500 x 40 mm)
Ceremic Tiles Pieces for Crazy Flooring
White marble makrana second quality plain veined stone pieces
for crazy flooring
FS800H Grade Flooring Panel ( Size 600 mm x600 mm x32 mm)
Zinc Electroplated Pedestals - 300 mm
Zinc Electroplated Pedestals - 450 mm
Zinc Electroplated Tube Stinger
Machine Screw for Fixing
8 mm thick granite stone tiles (mirror polished of all shades)
8 mm thick marble tiles (polished) Raj Nagar
Stone Aggregate (Single size) : 100 mm nominal size
Stone Aggregate (Single size) : 80 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size
Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size
Stone chippings/ screenings 12.5/ 13.2 mm nominal size
Stone chippings/ screenings 10/ 11.2 mm nominal size
Solvent
Paving Asphalt VG 10 of approved quality
Polyvinyle chloride sheet 400 micron thick
Stone ware spouts 100 mm dia 60 cm long
Galvanised steel corrugated sheets
Gunmetal non-return valve - vertical (screwed end) 25 mm dia
Gunmetal non-return valve - vertical (screwed end) 32 mm dia
Gunmetal non-return valve - vertical (screwed end) 40 mm dia
Gunmetal non-return valve - vertical (screwed end) 50 mm dia
Gunmetal non-return valve - vertical (screwed end) 65 mm dia
Vitreous china Surgeon type wash basin of size 660x460 mm
600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size
Vitreous china flat back wash basin 550x400 mm
Gunmetal non-return valve - vertical (screwed end) 80 mm dia
C.I.sluice valve (with caps) class II : 100 mm dia
C.I.sluice valve (with caps) class II : 125 mm dia
C.I.sluice valve (with caps) class II : 150 mm dia
2711
2712
2713
2714
2715
2750
2751
2901
2902
2903
2904
2908
2909
2910
2911
2914
2916
3002
3004
3050
3080
3084
3088
3092
3096
3213
3228
3229
3300
3311
3314
3317
Unit
27
Rate
metre
sqm
metre
kg
kilogram
sqm
quintal
5.00
1200.00
561.95
57.00
220.00
1090.00
135.00
quintal
each
each
each
each
each
sqm
sqm
cum
cum
cum
cum
cum
cum
cum
cum
kilogram
tonne
sqm
each
quintal
each
each
each
each
each
each
140.00
750.00
140.00
150.00
70.00
2.00
700.00
360.00
800.00
800.00
1150.00
1150.00
380.00
400.00
1100.00
1100.00
25.00
40000.00
35.00
35.00
5400.00
360.00
520.00
750.00
1010.00
1710.00
1100.00
each
each
each
each
each
each
250.00
550.00
2890.00
2910.00
3500.00
4300.00
Code
No.
Description
Unit
Rate
3320
3321
3326
3327
3617
3620
each
each
each
each
each
9210.00
14800.00
18500.00
5822.00
195.00
each
1250.00
each
each
each
each
each
each
each
each
each
1035.00
290.00
240.00
265.00
195.00
296.00
250.00
472.00
330.00
each
each
each
each
495.00
373.00
620.00
462.00
each
615.00
each
each
480.00
570.00
each
each
640.00
800.00
each
850.00
each
425.00
each
323.00
each
530.00
each
425.00
each
545.00
each
each
each
725.00
225.00
285.00
3621
3624
3625
3628
3629
3634
3635
3640
3641
3644
3645
3650
3651
3654
3655
3660
3664
3670
3674
3681
3682
3685
3686
3690
3695
3699
3707
28
Code
No.
Description
3708
3712
3713
3716
3717
3728
3729
3733
3734
3738
3739
3746
3747
3749
3860
3861
4001
4002
4006
4007
4008
4009
4010
4011
4012
4013
4201
4202
4203
4204
4205
4206
4207
5001
6001
6007
6010
6019
6501
7001
7003
Unit
29
Rate
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
kg
kg
metre
metre
metre
kilogram
kilogram
kilogram
each
each
litre
litre
kilogram
kilogram
kilogram
kilogram
kilogram
litre
sqm
sqm
sqm
sqm
cum
390.00
300.00
383.00
358.00
465.00
400.00
295.00
350.00
300.00
250.00
170.00
218.00
363.00
150.00
9000.00
5000.00
350.00
130.00
220.00
240.00
270.00
52.00
65.00
70.00
60.00
30.00
100.00
70.00
300.00
35.00
300.00
220.00
20.00
200.00
1870.00
645.00
690.00
500.00
550.00
each
260.00
each
315.00
Code
No.
Description
7004
7005
7006
7008
7009
7010
7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7022
7023
7024
7027
7028
7029
7030
7031
7032
7033
7034
7035
7036
7040
7042
7043
7044
7045
7046
7047
7048
7049
Unit
30
Rate
each
each
each
1000 Nos
sqm
metre
metre
metre
metre
425.00
925.00
1600.00
4600.00
200.00
39.00
27.00
42.00
19.00
each
each
kilogram
kilogram
roll
each
100 Nos
litre
litre
each
tonne
10 Nos
sqm
6.20
4.00
22.00
24.00
145.00
15.00
60.00
85.00
160.00
7.00
8150.00
110.00
927.00
sqm
sqm
sqm
250.00
237.00
271.00
sqm
metre
metre
each
each
100 Nos
metre
metre
sqm
sqm
metre
metre
each
metre
335.00
80.00
70.00
7.00
8.00
50.00
60.00
70.00
1080.00
1150.00
320.00
350.00
10.00
22.00
Code
No.
Description
Unit
Rate
7050
7051
7052
7053
7055
PU Primer
40 mm (average) PU spray having 40-45 kg/m3 density
GI wire netting 3/4" x 24 G
400 G polythene sheet
Flat pressed 3 layer and graded particle board (medium density)
Grade 1 conforming to IS : 3087 - 18 mm thick
Aluminium tee channel (heavy duty) with rollers and stop end
Aluminium hanging floor door stopper with twin rubber & stopper
Hydraulic door closer tubular type Aluminium section body
Oxidised M.S.casement stay (straight peg type) 300 mm not less
than 0.33 kg
Oxidised M.S.casement stay (straight peg type) 250 mm not less
than 0.28 kg
Oxidised M.S. casement stay (straight peg type) 200 mm not
less than 0.24 kg
Extra for providing grilled rolling shutters with 8 mm dia M.S. rod
Chequered precast cement concrete tiles 22 mm thick using
marble chips of size 6mm - Light shade using white cement
White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area
Wall mounted water closet
Adjustable Vetrious China Cistern with fittings
White Vetrious China Waterless Urinal
Cistern with fittings for Waterless Urinal
White Vetrious Urinal
Acid and alkali resistant tiles 300x300 mm size, 10 mm thick
S.C.I. Tee 150 mm
Expanded polystyrene type N- Normal
Expanded polystyrene type - SE
Stainless steel kitchen sink - with drain board bowl depth 250 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 225 mm
Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 200 mm
Stainless steel kitchen sink - with drain board 510x1040 mm bowl
depth 178 mm
Stainless steel kitchen sink - without drain board 610x510 mm
bowl depth 200 mm
sqm
sqm
sqm
sqm
41.00
421.00
27.00
15.00
sqm
metre
each
each
420.00
50.00
65.00
840.00
each
22.00
each
20.00
each
sqm
18.00
270.00
7056
7059
7060
7063
7064
7065
7068
7070
7071
7072
7073
7074
7075
7076
7077
7087
7090
7091
7095
7096
7097
7098
7101
7102
7103
7104
7105
7106
7107
7112
sqm
sqm
each
each
each
each
each
10 Nos
each
sqm
sqm
each
470.00
600.00
4650.00
2500.00
15000.00
3400.00
14000.00
570.00
600.00
130.00
155.00
5185.00
each
4950.00
each
4250.00
each
3000.00
each
3150.00
each
2845.00
each
each
each
each
each
each
2120.00
1320.00
1150.00
1720.00
550.00
450.00
31
Code
No.
Description
Unit
Rate
7113
7114
each
300.00
each
each
sqm
350.00
700.00
175.00
each
30.00
each
35.00
each
28.00
each
30.00
each
685.00
each
975.00
each
each
each
1500.00
190.00
250.00
each
750.00
each
650.00
each
600.00
each
700.00
each
660.00
each
1100.00
each
1225.00
sqm
1850.00
sqm
2030.00
sqm
1950.00
7115
7116
7117
7118
7119
7120
7123
7126
7127
7128
7129
7130
7131
7132
7133
7134
7135
7136
7137
7139
7143
32
Code
No.
Description
7151
7154
7155
7157
7178
7181
7182
7183
7184
7187
7188
7189
7190
7191
7192
7193
7194
7195
7196
7197
7198
7199
7208
7209
7212
7213
7214
7215
7231
7232
7233
7236
33
Unit
Rate
sqm
1650.00
sqm
1630.00
sqm
1450.00
10 cudm
kg
kilogram
kilogram
tonne
710.00
110.00
50.00
45.00
3100.00
each
each
60.00
25.00
metre
67.00
metre
129.00
each
16.00
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
sqm
sqm
sqm
20.00
34.00
52.00
50.00
81.00
95.00
128.00
115.00
180.00
56.00
95.00
107.00
207.00
16.00
31.00
145.00
204.00
72.00
sqm
230.00
Code
No.
Description
7237
7238
7239
7240
7241
7244
7245
7246
7247
7248
7249
7250
7251
7252
7253
7254
7255
7256
7257
7258
7259
7260
7261
7266
7267
34
Unit
Rate
sqm
kg
litre
litre
litre
370.00
246.00
250.00
260.00
300.00
sqm
1750.00
sqm
1800.00
per test
33200.00
per test
40300.00
per test
48500.00
per test
15000.00
per test
23000.00
per test
29500.00
per test
15000.00
per test
litre
litre
litre
23600.00
40.00
120.00
170.00
each
each
each
each
each
1000 Nos
375.00
657.00
501.00
513.00
417.00
12150.00
each
120.00
Code
No.
Description
7268
7269
7270
7271
7272
7273
7280
7281
7295
7296
7297
7306
7307
7309
7312
7313
7314
7315
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7338
7339
Unit
35
Rate
each
sqm
sqm
metre
sqm
sqm
tonne
kg
sqm
sqm
sqm
kilogram
120.00
480.00
850.00
40.00
940.00
211.00
40000.00
170.00
1900.00
2300.00
2000.00
200.00
sqm
tonne
340.00
41000.00
each
10.00
each
11.00
each
14.00
each
kilogram
each
each
each
each
each
each
each
each
each
each
each
metre
15.00
38.00
1050.00
50.00
60.00
75.00
90.00
16.00
18.00
300.00
1160.00
97.00
77.00
280.00
each
each
each
each
kilogram
kilogram
kilogram
1040.00
340.00
1220.00
830.00
53.00
330.00
340.00
Code
No.
Description
7340
7342
7343
7344
7345
7346
7347
7348
7349
7354
7358
7359
7361
7363
7364
7366
7367
7369
7375
7376
7377
7378
7379
7380
7381
7382
7385
7386
7387
7388
7389
7390
7391
7392
7393
7394
7395
Unit
36
Rate
kg
each
each
each set
each
each
100 Nos
100 nos
metre
each
190.00
1900.00
1200.00
422.00
1170.00
55.00
28.00
10.00
15.00
115.00
each
each
each
each
each
sqm
640.00
490.00
530.00
700.00
550.00
240.00
metre
metre
60.00
75.00
each
465.00
each
1050.00
each
1250.00
each
1900.00
each
each
each
tonne
sqm
sqm
kilogram
each
kilogram
metre
kilogram
kilogram
kilogram
each
each
1600.00
650.00
325.00
29800.00
570.00
260.00
45.00
50.00
40.00
25.00
50.00
64.00
70.00
1550.00
28.00
Code
No.
Description
Unit
Rate
7396
7397
7398
7399
7400
7401
7402
7403
7405
7406
7407
7408
7409
7410
7411
7412
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
1700.00
180.00
800.00
80.00
100.00
140.00
160.00
100.00
130.00
160.00
90.00
80.00
31.00
225.00
42.00
each
each
each
each
each
each
each
each
each
each
each
each
each
metre
metre
metre
each
each
each
sqm
each
each
each
sqm
kilogram
sqm
122.00
4000.00
5200.00
6800.00
2130.00
3300.00
5000.00
5400.00
2810.00
4580.00
5810.00
8250.00
180.00
415.00
390.00
375.00
14.00
15.00
28.00
500.00
65.00
14.00
11.00
830.00
220.00
300.00
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426
7427
7428
7429
7430
7431
7432
7439
7442
7443
7444
7445
7449
7451
37
Code
No.
Description
7452
7453
7466
7468
7477
7478
7479
7480
7485
7486
7491
7492
7493
7494
7495
7496
7497
7498
7499
7500
7501
7503
7504
7505
7506
7507
7508
38
Unit
Rate
sqm
650.00
sqm
750.00
metre
30.00
sqm
500.00
sqm
740.00
sqm
850.00
sqm
930.00
sqm
780.00
metre
42.00
metre
each
each
each
each
54.00
51.00
64.00
317.00
345.00
each
134.00
each
195.00
each
420.00
each
780.00
each
each
each
each
each
each
each
each
each
1150.00
130.00
87.00
145.00
116.00
192.00
226.00
258.00
127.00
Code
No.
Description
7509
7512
7513
7514
7515
7516
7517
7518
7552
7553
7555
7556
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664
7665
7666
7668
7669
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
Unit
39
each
each
each
each
each
each
each
each
sqm
sqm
sqm
sqm
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
Rate
120.00
30.00
34.00
42.00
56.00
65.00
80.00
27.00
290.00
390.00
650.00
1030.00
800.00
1200.00
1650.00
2300.00
2860.00
3510.00
4500.00
5200.00
6580.00
7930.00
11000.00
11900.00
12000.00
14500.00
16300.00
30.00
38.00
66.00
78.00
115.00
132.00
240.00
280.00
305.00
380.00
575.00
690.00
760.00
1000.00
1200.00
Code
No.
Description
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
Unit
40
Rate
quintal
13000.00
quintal
18000.00
quintal
13700.00
quintal
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
19650.00
2180.00
3500.00
4110.00
3425.00
6960.00
8800.00
10610.00
12900.00
15100.00
20630.00
25600.00
900.00
1120.00
1350.00
2300.00
3000.00
4050.00
4850.00
6400.00
7750.00
9000.00
12595.00
quintal
5450.00
quintal
8200.00
quintal
9000.00
quintal
9500.00
metre
1375.00
metre
2150.00
metre
3400.00
metre
4100.00
Code
No.
Description
7716
7717
7718
7719
7720
7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
7738
7739
7741
7742
7743
7744
7745
7746
7747
7748
7749
7750
7751
7752
7753
7754
41
Unit
Rate
metre
5240.00
metre
6600.00
metre
8550.00
metre
10900.00
metre
13560.00
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
1000 Nos
1000 Nos
1000 Nos
tonne
18800.00
775.00
1120.00
1550.00
2100.00
2900.00
3445.00
4015.00
4852.00
5735.00
7480.00
9613.00
12100.00
16070.00
17032.00
5400.00
4700.00
5000.00
40900.00
tonne
tonne
metre
metre
metre
metre
each
each
each
each
metre
metre
cum
cum
40800.00
30000.00
1060.00
1300.00
500.00
750.00
160.00
200.00
200.00
220.00
450.00
700.00
350.00
700.00
Code
No.
Description
7755
7756
7757
7758
7759
7760
7761
7762
7763
7764
7765
7766
7767
7768
7769
7770
7771
7772
7773
7774
7775
7800
Gravel 1.5 mm to 2 mm
Gravel 3 mm to 6 mm
M.S. pipe 100 mm dia casing pipe
uPVC blind pipe 100 mm dia as per IS: 12818
uPVC slotted pipe 100 mm dia as per IS: 12818
M.S. cap 100 mm dia
M.S. bail plug 100 mm dia
Precast R.C.C. perforated slab
Water supply tanker of 5000 litre capacity
M.S. socket 100 mm dia
M.S. socket 150 mm dia
M.S. socket 200 mm dia
Stone cleaning chemical approved by ASI
Water repallent chemical approved by ASI
Stone surface strengthening chemical approved by ASI
Turpentine oil
Liquid Amonia 5%
Pea Gravel
Coloured inter locking C.C. paver Block
Stone size 10x10x7.50cm
Sodium pentachlorophenate
Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all
colours shades and designs except burgundy, bottle green, black
Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and
designs of White, Ivory, grey, Fume Red brown etc.
Ceramic Glazed Tiles 1st quality 300 x 300 in all shades designs
except White, Ivory, Grey, Fume Red Brown etc.
Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more
in all shades designs White, Ivory, Grey, Fume Red Brown etc.
Rectified Ceramic Glazed Tiles 1st quality 300 x 300 mm or more
in all shades designs except White, Ivory, Grey, Fume Red Brown etc.
Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
724 mm X 578 mm
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355 mm
Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345 mm
Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet
Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet
Agaria White marble slab plain 18 mm thick
P.T.M.T. Grating square slit 150 mm
P.T.M.T. Urinal cock 15 mm dia
7801
7802
7803
7804
7805
7806
7807
7808
7809
7850
7857
7858
7859
7861
7862
Unit
42
Rate
cum
cum
metre
metre
metre
each
each
each
each
each
each
each
litre
litre
litre
litre
litre
cum
sqm
each
kilogram
650.00
680.00
770.00
360.00
380.00
130.00
160.00
800.00
800.00
180.00
220.00
280.00
165.00
1587.00
1020.00
68.00
161.00
750.00
500.00
9.00
630.00
sqm
300.00
sqm
365.00
sqm
375.00
sqm
515.00
sqm
545.00
each
each
each
each
each
sqm
each
each
3800.00
1850.00
1650.00
435.00
468.00
1120.00
77.00
120.00
each
each
145.00
158.00
each
32.00
Code
No.
Description
7863
7864
7865
7866
7893
7895
7896
7900
7901
7902
7903
7904
8001
8002
8003
8004
8006
8007
8008
8010
8011
8012
8014
8100
8200
8201
8203
8204
8205
8206
8207
8210
8211
8212
8214
8215
Unit
43
Rate
each
each
each
each
sqm
sqm
sqm
1000 Nos
40.00
32.00
38.00
57.00
868.00
930.00
510.00
4500.00
1000 Nos
4600.00
1000 Nos
4600.00
1000 Nos
4500.00
1000 Nos
5000.00
sqm
2150.00
sqm
sqm
2250.00
2150.00
sqm
sqm
sqm
sqm
2550.00
185.00
632.00
752.00
metre
metre
kg
150.00
350.00
165.00
metre
10 Nos
sqm
sqm
sqm
sqm
sqm
litre
sqm
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
490.00
85.00
60.00
99.00
167.00
207.00
245.00
82.00
38.00
250.00
200.00
150.00
100.00
250.00
Code
No.
Description
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
8300
8301
8302
8303
8304
8305
8501
8502
8504
8505
8506
8507
8508
8509
8510
8589
8590
8591
8592
8593
8594
8595
8597
8598
8599
Unit
44
Rate
10 Nos
10 Nos
10 Nos
230.00
150.00
130.00
10 Nos
330.00
10 Nos
240.00
10 Nos
10 Nos
10 Nos
10 nos
10 Nos
metre
metre
metre
metre
metre
metre
kilogram
sqm
litre
litre
litre
litre
litre
litre
litre
195.00
330.00
170.00
90.00
75.00
95.00
125.00
160.00
205.00
340.00
375.00
135.00
44.00
275.00
140.00
235.00
200.00
78.00
83.00
120.00
sqm
858.00
each
192.00
each
125.00
each
77.00
each
each
each
39.00
3.00
0.60
sqm
895.00
sqm
1000.00
sqm
809.00
Code
No.
Description
8600
8601
8602
8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8618
8620
8621
8622
8623
8625
8626
8627
8628
8629
8630
8631
8632
8633
8634
8635
45
Unit
Rate
sqm
906.00
sqm
468.00
sqm
metre
metre
metre
each
each
each
each
each
each
each
each
each
each
each
each
sqm
sqm
sqm
sqm
484.00
180.00
155.00
164.00
5.00
11.00
11.00
9.00
187.00
118.00
72.00
34.00
8.00
6.00
3.00
11.00
745.00
880.00
1085.00
1650.00
metre
37.00
metre
57.00
metre
88.00
metre
142.00
metre
213.00
metre
333.00
metre
513.00
metre
700.00
metre
1066.00
metre
1200.00
metre
2500.00
Code
No.
Description
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8646
8647
8648
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
cartridge
100 Nos
55.00
68.00
95.00
130.00
185.00
300.00
910.00
1300.00
1800.00
2150.00
307.00
29.00
sqm
2290.00
each
172.00
each
215.00
each
275.00
each
490.00
each
850.00
8654
8655
8656
8657
8659
8660
8661
8662
8663
8664
8665
8666
Masking tape
Autoclaved aerated cement (AAC) blocks
Gypsum panel 666 X 500 X 100 mm size
Bonding plaster for Gypsum panel
Water proof ply 12 mm thick
Aluminium casement window fastener (Anodised AC 15 )
Aluminium casement window fastener (powder coated )
Aluminium casement window fastener (polyester powder coated)
Aluminium round shape handle (anodised AC 15)
Aluminium round shape handle (powder coated)
Aluminium round shape handle (polyester powder coated)
Stainless steel screws 25 mm x4 mm
metre
cum
sqm
kg
sqm
each
each
each
each
each
each
100 Nos
8667
8668
8669
8670
8671
8672
8673
2.50
2025.00
480.00
55.00
650.00
40.00
41.00
40.00
49.00
54.00
59.00
32.00
465.00
538.00
29.00
10.50
435.00
440.00
440.00
8649
8650
8651
8652
8653
Unit
46
sqm
sqm
each
each
sqm
metre
metre
Rate
Code
No.
Description
8674
8675
8676
8677
8678
8682
8683
8684
8685
8686
8687
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8701
8702
8703
8704
8705
8706
8707
8708
8709
8710
47
Unit
Rate
metre
metre
metre
sqm
metre
kg
sqm
sqm
each
cum
kg
kg
sqm
sqm
455.00
455.00
445.00
475.00
40.00
510.00
460.00
480.00
310.00
4100.00
63.00
62.00
325.00
1525.00
bundle
metre
each set
each
750.00
9.00
40.00
60.00
sqm
258.00
sqm
285.00
sqm
340.00
each
sqm
sqm
90.00
368.00
390.00
metre
each
set
680.00
57.00
140.00
each
8.00
metre
sqm
140.00
2150.00
metre
380.00
sqm
1850.00
sqm
metre
2650.00
290.00
Code
No.
Description
Unit
Rate
8711
8712
sqm
2250.00
sqm
sqm
each
each
each
sqm
2108.00
3600.00
20.00
15.00
330.00
170.00
metre
30.00
metre
40.00
metre
each
100 Nos
sqm
sqm
sqm
sqm
25.00
2.00
75.00
850.00
880.00
490.00
380.00
sqm
per kg
2150.00
17.00
kg
365.00
kg
365.00
metre
350.00
sqm
2100.00
sqm
2600.00
sqm
830.00
metre
1000.00
sqm
kg
sqm
5250.00
700.00
21000.00
metre
metre
each
260.00
65.00
5000.00
8713
8714
8715
8716
8717
8719
8720
8721
8722
8723
8724
8725
8726
8727
8730
8731
8732
8733
8734
8735
8736
8737
8738
8739
8740
8741
8742
8743
8744
48
Code
No.
Description
8745
8746
8747
8748
8750
8751
8752
8753
8754
8755
8756
8757
8758
8759
8760
8761
8762
8763
8764
8765
8766
8767
8768
8769
8770
8771
8772
8773
8774
8775
8776
49
Unit
Rate
metre
330.00
sqm
2350.00
metre
350.00
sqm
each
each
each
each
each
2450.00
160.00
110.00
50.00
85.00
100.00
each
230.00
each
290.00
each
370.00
each
420.00
each
metre
530.00
165.00
metre
150.00
metre
185.00
metre
50.00
metre
metre
50.00
235.00
metre
265.00
metre
metre
metre
85.00
245.00
230.00
metre
metre
metre
metre
kg
metre
each
50.00
290.00
25.00
18.00
250.00
50.00
20.00
Code
No.
Description
Unit
Rate
8778
8779
sqm
1900.00
metre
144.00
metre
254.00
metre
330.00
metre
468.00
metre
sqm
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
582.00
688.00
88.00
108.00
231.00
330.00
446.00
103.00
141.00
145.00
237.00
237.00
359.00
362.00
362.00
387.00
468.00
470.00
474.00
479.00
522.00
113.00
184.00
236.00
349.00
490.00
609.00
86.00
153.00
211.00
429.00
657.00
808.00
8780
8781
8782
8783
8784
8786
8787
8788
8789
8790
8791
8792
8793
8795
8796
8797
8798
8799
8800
8801
8802
8803
8804
8805
8806
8807
8808
8809
8810
8811
8812
8813
8814
8815
8816
8817
50
Code
No.
Description
Unit
Rate
8818
8819
8820
8821
8822
8823
8824
8825
8826
8827
8828
8829
8830
8831
8832
8833
8834
8835
8836
8837
8838
8839
8840
8841
8842
8843
8844
8845
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
148.00
216.00
221.00
321.00
396.00
698.00
159.00
231.00
296.00
617.00
864.00
1028.00
225.00
280.00
291.00
548.00
558.00
564.00
819.00
821.00
822.00
830.00
894.00
913.00
920.00
958.00
993.00
each
286.00
each
344.00
each
368.00
each
414.00
each
432.00
each
483.00
each
602.00
each
651.00
each
777.00
8846
8847
8848
8849
8850
8851
8852
8853
51
Code
No.
Description
8854
8855
8856
8857
8858
8859
8860
8861
8862
8863
8864
8865
8866
8867
8868
8869
8870
8871
8872
8873
8874
8875
8876
8877
8878
52
Unit
Rate
each
981.00
each
919.00
each
941.00
each
1024.00
each
1137.00
each
1381.00
each
1000.00
each
1030.00
each
1074.00
each
1290.00
each
1431.00
each
1749.00
each
292.00
each
344.00
each
356.00
each
445.00
each
455.00
each
498.00
each
668.00
each
679.00
each
766.00
each
910.00
each
894.00
each
910.00
each
1022.00
Code
No.
Description
8879
8880
8881
8882
8883
8884
8885
8886
8887
8888
8889
8890
8891
8892
8893
8894
8895
8896
8897
8898
8899
8900
8901
8902
8903
53
Unit
Rate
each
1067.00
each
1162.00
each
1065.00
each
1076.00
each
1115.00
each
1184.00
each
1233.00
each
1366.00
each
190.00
each
230.00
each
237.00
each
277.00
each
286.00
each
337.00
each
409.00
each
538.00
each
576.00
each
681.00
each
838.00
each
965.00
each
193.00
each
227.00
each
248.00
each
313.00
each
320.00
Code
No.
Description
8904
8905
8906
8907
8908
8909
8910
8911
8912
8913
8914
8915
8916
8917
8918
8919
8920
8921
8922
8923
8924
8925
8926
8927
8928
54
Unit
Rate
each
461.00
each
565.00
each
649.00
each
726.00
each
840.00
each
1138.00
each
234.00
each
276.00
each
295.00
each
424.00
each
629.00
each
875.00
each
1176.00
each
205.00
each
275.00
each
284.00
each
421.00
each
733.00
each
920.00
each
995.00
each
1103.00
each
1286.00
each
216.00
each
273.00
each
288.00
Code
No.
Description
8929
8936
8937
8938
8939
8940
8941
8942
8943
8944
8945
8946
8947
8948
8949
8953
8954
8955
9999
8930
8931
8932
8933
8934
8935
55
Unit
Rate
each
377.00
each
605.00
each
736.00
each
934.00
each
1060.00
each
1190.00
each
each
each
each
1449.00
45.00
64.00
84.00
each
each
each
each
each
each
Nos
Nos
Nos
Nos
pair
kg
sqm
sqm
L.S.
173.00
253.00
330.00
214.00
271.00
407.00
3318.00
1659.00
1404.00
651.00
5931.00
32.00
4.50
72.00
1.70
BASIC RATES
0.4 CARRIAGE CODES
(Carriage by Mechanical Transport including loading, Unloading and stacking)
Note: - These rates are exclusive of contractor's profit and overhead charges.
Code
No.
Description
Unit
Rate
2200
Steam coal
tonne
121.88
2201
Bricks
1000 Nos
284.39
2202
cum
106.64
2203
Coarse sand
cum
106.64
2204
Timber
cum
121.88
2205
Steel
tonne
94.80
2206
cum
115.92
2207
Brick tiles
1000 Nos
170.63
2208
Lime
cum
106.64
2209
Cement
tonne
94.80
2211
Tar / Bitumen
tonne
106.64
2215
cum
125.47
2216
Stone blocks white & red sand stone & kota stone slab
tonne
94.80
2224
100 metre
142.19
2225
100 metre
284.39
2226
100 metre
473.98
2228
100 metre
812.54
2229
100 metre
1015.68
2241
Good earth
cum
133.30
2242
Dump manure
cum
115.92
2260
Brick aggregate
cum
115.92
2261
cum
106.64
2262
Flyash
cum
106.64
2264
Rubbish
cum
106.64
2265
Moorum
cum
106.64
2266
Surkhi
cum
106.64
2267
Stone dust
cum
106.64
2268
cum
106.64
2271
tonne
94.80
2272
tonne
94.80
2273
tonne
94.80
56
Code
No.
Description
2275
100 metre
233.10
2281
100 metre
388.51
2287
100 metre
898.07
2290
100 metre
1110.03
2299
100 metre
2590.06
2302
2303
2308
Plaster of paris
tonne
94.80
2309
tonne
94.80
2311
Red bajri
cum
106.64
2314
Barbed wire
tonne
94.80
2317
Sludge
cum
115.92
2319
100 metre
233.10
2320
100 metre
311.37
2321
100 metre
388.51
2322
100 metre
631.97
2323
100 metre
898.07
2324
100 metre
1110.03
2325
100 metre
1554.03
2326
100 metre
2119.14
2327
100 metre
2590.06
2328
100 metre
2590.06
2329
100 metre
3885.10
2330
100 metre
2590.06
2331
100 metre
5827.64
2332
100 metre
7770.19
2333
100 metre
7770.19
2334
100 metre
7770.19
2335
Jamuna sand
cum
106.64
2336
100 metre
7339.87
2341
Pig lead
tonne
94.80
2342
Solvent / Diesel.
quintal
10.66
2343
100 metre
233.10
2344
100 metre
388.51
2345
100 metre
631.97
Unit
tonne
100 metre
57
Rate
94.80
3885.10
Code
No.
Description
2346
100 metre
898.07
2347
100 metre
1110.03
2348
100 metre
1554.03
2349
100 metre
2119.14
2350
100 metre
2590.06
2351
100 metre
2590.06
2352
100 metre
3885.10
2353
100 metre
3885.10
2355
100 metre
3885.10
2356
100 metre
5827.64
2357
100 metre
7770.19
Unit
58
Rate
CARRIAGE OF MATERIALS
59
CARRIAGE OF MATERIALS
Data Sheet No 1 for Analysis of Rates
1.1 By Mechanical Transport including loading, unloading and stacking:
Lead
in km
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Average
speed
Nos of
Trips
N=8/
(2L/S)+1
16.00
17.00
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
25.00
25.50
26.00
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Nos of
km
Done
in one
Day
(2NL+6)
7.11
6.48
5.96
5.54
5.19
4.90
4.66
4.44
4.26
4.10
3.95
3.83
3.71
3.61
3.51
3.43
3.35
3.28
3.21
3.15
20.22
31.92
41.76
50.32
57.90
64.80
71.24
77.04
82.68
88.00
92.90
97.92
102.46
107.08
111.30
115.76
119.90
124.08
127.98
132.00
Code
Name
Unit
Rate
0005
0114
0115
1235
5001
Day
Day
Day
Litre
Litre
2000.00
297.00
297.00
48.63
200.00
Litres of
Diesel
consum
ed
@ 5 km.
per Litre
5
4.04
6.38
8.35
10.06
11.58
12.96
14.25
15.41
16.54
17.60
18.58
19.58
20.49
21.42
22.26
23.15
23.98
24.82
25.60
26.40
Cost of
Diesel
(1235)
@
per
Litre
Litres of
Mobil oil
consumed
@ 140 km.
per Litre
196.47
310.26
406.06
489.22
563.14
630.24
692.98
749.39
804.34
855.89
903.55
952.18
996.43
1041.65
1082.50
1125.78
1166.15
1207.00
1244.93
1283.83
0.144
0.228
0.298
0.359
0.414
0.463
0.509
0.550
0.591
0.629
0.664
0.699
0.732
0.765
0.795
0.827
0.856
0.886
0.914
0.943
Cost of
Mobil oil
(5001)
@
per
Litre
8
28.80
45.60
59.60
71.80
82.80
92.60
101.80
110.00
118.20
125.80
132.80
139.80
146.40
153.00
159.00
165.40
171.20
177.20
182.80
188.60
61
Cost of
6 Beldars
(0114)
@
per
Day
9
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
Hire charges
of truck
(0005)
@
per
Day
Total
Cost=
6+8+9+10
in
Cost
per Trip
= col. 11/
col. 3
in
10
11
12
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
4007.27
4137.86
4247.66
4343.02
4427.94
4504.84
4576.78
4641.39
4704.54
4763.69
4818.35
4873.98
4924.83
4976.65
5023.50
5073.18
5119.35
5166.20
5209.73
5254.43
563.61
638.56
712.69
783.94
853.17
919.36
982.14
1045.36
1104.35
1161.88
1219.83
1272.58
1327.45
1378.57
1431.20
1479.06
1528.16
1575.06
1622.97
1668.07
Increase
Average
of cost
cost per
per km
additional
over
km after first
previous 5,10 and 20
km in
km in
13
66.19
62.79
63.22
58.99
57.52
57.96
52.74
54.87
51.13
52.62
47.86
49.10
46.90
47.91
45.11
14
61.74
50.62
21
22
23
24
25
26
27
28
29
30
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
3.09
3.04
2.99
2.95
2.90
2.86
2.83
2.79
2.76
2.73
10
11
12
13
135.78
139.76
143.54
147.60
151.00
154.72
158.82
162.24
166.08
169.80
27.16
27.95
28.71
29.52
30.20
30.94
31.76
32.45
33.22
33.96
1320.79
1359.21
1396.17
1435.56
1468.63
1504.61
1544.49
1578.04
1615.49
1651.47
0.970
0.998
1.025
1.054
1.079
1.105
1.134
1.159
1.186
1.213
194.00
199.60
205.00
210.80
215.80
221.00
226.80
231.80
237.20
242.60
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
1782.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
2000.00
5296.79
5340.81
5383.17
5428.36
5466.43
5507.61
5553.29
5591.84
5634.69
5676.07
1714.17
1756.84
1800.39
1840.12
1884.97
1925.74
1962.29
2004.24
2041.55
2079.15
46.10
42.67
43.55
39.73
44.85
40.76
36.55
41.95
37.31
37.59
14
41.11
Notes
1
2
3
4
5
Number of trips in working day of 8 hours N=8/{(2L/S)+1)}. Where L=Lead in Km., S=Speed in Km.per hour, 1 hour is allowed for loading /
unloading.
Consumption of diesel taken at 5 Km. per litre.
Consumption of mobile oil taken at 140 Km. per litre.
In column 4 of 'km done' an allowance of 6.0 km has been made for movement of truck from parking place to duty & back.
(i) Cost of diesel @ (1235) per litre
(ii) Cost of mobile oil @(5001) per litre
(iii) Hire charges of truck @ (0005) for a day of 8 hours.
62
Material
Unit
of
rates
C.P. &
Over
heads
@ 15%
2km
3km
4km
Beyond
5 km upto
10 km
per km
5km
Beyond
10 km
upto 20
km per
km
Beyond
Remarks
20 km per
addl.
km
cum
15%
81.02
6.4
7.36
4
8
cum
cum
cum
cum
15%
15%
15%
15%
7.36
cum
1.1.7
1.1.8
8
Lime, moorum, building
rubbish
8
Earth
8
Manure or sludge
8
Excavated rock
8
Sand, stone aggregate
below 40 mm nominal size
8
Stone aggregate 40 mm
nominal size and above
8
Soling stone
3000
Bricks
6.8
3000
1.1.9
Brick Tiles
5000
5000
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.10
11
12
13
102.45 112.69
122.64
8.88
7.28
5.91
101.27 114.74
88.06 99.77
162.04 183.59
81.02 91.79
128.06
111.36
204.90
102.45
140.86
122.49
225.38
112.69
153.30
133.31
245.29
122.64
11.09
9.65
17.75
8.88
9.10
7.91
14.55
7.28
7.39
6.42
11.82
5.91
15%
88.06
99.77
111.36 122.49
133.31
9.65
7.91
6.42
15%
15%
95.32 107.99
216.05 244.78
120.53 132.58
273.20 300.51
144.29
327.05
10.44
23.67
8.56
19.40
6.95
15.76
15%
129.63 146.87
163.92 180.31
196.23
14.20
11.64
9.45
15%
72.02
91.07 100.17
109.02
7.89
6.47
5.25
91.79
10
14
cum
1000
Nos
1000
Nos
tonne
9
7
8
80
7
9
7
8
80
7
tonne
cum
tonne
qtl
tonne
15%
15%
15%
15%
15%
72.02 81.59
92.59 104.91
81.02 91.79
8.10
9.18
92.59 104.91
91.07
117.09
102.45
10.24
117.09
100.17
128.79
112.69
11.27
128.79
109.02
140.16
122.64
12.26
140.16
7.89
10.14
8.88
0.89
10.14
6.47
8.32
7.28
0.73
8.32
5.25
6.75
5.91
0.59
6.75
600
300
600
300
100 m
100 m
15%
15%
108.03 122.39
216.05 244.78
136.60 150.25
273.20 300.51
163.52
327.05
11.83
23.67
9.70
19.40
7.88
15.76
63
81.59
15
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
R.C.C. pipe, A.C. pipes,
steel cylinder, R.C. pipes,
C.I. pipes, C.I. pipes and
unreinforces cement pipes
1.1.17.1 100 mm dia
1.1.17.2 125 mm dia
1.1.17.3 150 mm dia
1.1.17.4 200 mm dia
1.1.17.5 250 mm dia
1.1.17.6 300 mm dia
1.1.17.7 350 mm dia
1.1.17.8 400 mm dia
1.1.17.9 450 mm & 500 mm dia
1.1.17.10 600, 700, 750 & 800 mm
dia
1.1.17.11 900 mm dia
1.1.17.12 1000, 1100 & 1200 mm
dia
1.1.16.3
1.1.16.5
1.1.16.6
1.1.16.7
1.1.16.8
1.1.16.9
1.1.16.10
1.1.16.11
1.1.17
180
105
84
60
42
33
30
24
180
105
84
60
42
33
30
24
100
100
100
100
100
100
100
100
m
m
m
m
m
m
m
m
15%
15%
15%
15%
15%
15%
15%
15%
366
274
219.6
135
95
76.86
54.9
40.26
32.94
21.96
366
274
219.6
135
95
76.86
54.9
40.26
32.94
21.96
100
100
100
100
100
100
100
100
100
100
m
m
m
m
m
m
m
m
m
m
14.64
10.98
14.64
10.98
100 m
100 m
360.08
617.29
771.61
1080.25
1543.22
1964.09
2160.50
2700.63
407.97
699.37
874.22
1223.90
1748.43
2225.28
2447.81
3059.76
455.33
780.57
975.71
1366.00
1951.43
2483.63
2732.00
3415.00
500.85
858.60
1073.25
1502.55
2146.50
2731.91
3005.10
3756.37
545.08
934.42
1168.03
1635.24
2336.05
2973.16
3270.47
4088.09
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
177.09
236.55
295.15
480.11
682.26
843.29
1180.60
1609.91
1967.67
2951.51
200.64
268.01
334.40
543.96
772.99
955.43
1337.60
1824.00
2229.33
3344.00
223.93
299.12
373.22
607.11
862.74
1066.35
1492.89
2035.76
2488.16
3732.24
246.32
329.03
410.53
667.80
948.98
1172.95
1642.13
2239.27
2736.88
4105.32
15%
15%
64
10
11
12
13
14
39.45
67.62
84.53
118.34
169.05
215.16
236.68
295.85
32.34
55.44
69.30
97.02
138.60
176.40
194.04
242.55
26.26
45.02
56.28
78.79
112.56
143.25
157.58
196.97
268.07
358.08
446.79
726.77
1032.78
1276.53
1787.14
2437.01
2978.57
4467.86
19.40
25.91
32.33
52.59
74.74
92.38
129.33
176.36
215.55
323.33
15.91
21.25
26.51
43.12
61.28
75.74
106.03
144.59
176.72
265.09
12.92
17.25
21.53
35.02
49.76
61.51
86.11
117.42
143.51
215.27
6157.98 6701.79
8210.65 8935.72
484.99
646.66
397.63
530.17
322.91
430.54
15
Name
Unit
Rate
0114
0115
Beldar
Coolie
Day
Day
297.00
297.00
The following labour work for 8 hours a day will carry following material upto 1st 50 metre as given below:
0114/0115 Beldars (Male/Female) 7.67 Nos. @
297.00
2277.99
35 cum
28 cum
Bricks
15000 nos
24000 nos
Steam coal
30 tonnes
NOTE :
Cost per 8
hours day
Increase in cost
for every additional
50 metres or part
thereof
(X)
50 metres
Code
No.
1.2.1
1.2.2
1.2.3
1.2.4
1.2.5
1.2.6
1.2.7
1.2.8
1.2.9
1.2.10
(X)
Material
Capacity
per Trip
(Y)
2277.99
495.99
Net Qty
Unit of
Payable
rates
after deduction for
looseness
35
35
35
35
35
28
32.2
17.5
cum
cum
cum
cum
15%
15%
15%
15%
2619.69
2619.69
2619.69
2619.69
74.85
93.56
81.36
149.70
16.30
20.37
17.71
32.59
28
28
cum
15%
2619.69
93.56
20.37
28
28
15000 Nos
24000 Nos
30 tonne
25.9
23.8
15000 Nos
24000 Nos
30 tonne
cum
cum
1000 Nos
1000 Nos
tonne
15%
15%
15%
15%
15%
2619.69
2619.69
2619.69
2619.69
2619.69
101.15
110.07
174.65
109.15
87.32
22.02
23.97
38.03
23.77
19.01
65
Name
Unit
Rate
0114
0115
Beldar
Coolie
Day
Day
297.00
297.00
The following labour work for 8 hours a day will carry following material upto 1st 50 metre as given below:
0114 Beldars 9.20 Nos @
297.00 =
2732.40 (X)
Quantity of material as per column 3 of table below will be carried in 50 metres lead including loading
and unloading.
NOTE:S. No
1.2.11
1.2.12
1.2.13
1.2.14
1.2.15
1.2.16
1.2.16.1
1.2.16.2
1.2.16.3
1.2.16.5
1.2.16.6
1.2.16.7
1.2.16.8
1.2.16.9
1.2.16.10
1.2.16.11
1.2.17
1.2.17.1
1.2.17.2
1.2.17.3
1.2.17.4
1.35 extra Beldar will be required for every additional lead of 50 metre 0114 coolie 1.35
Nos @
297.00 =
400.95 (Y)
Material
Stoneblocks,G.I.,C.I.
StainlessSteel pipes
below100 mm dia and
other heavy material
Cement
Steel
Timber
Tar, bitumen etc.
S.W. pipe
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
R.C.C. pipes, Steel
cylinder,R.C.pipes, C.I.
pipes, C.I. pipes and
unreinforced cement pipes
100 mm dia
125 mm dia
150 mm dia
200 mm dia
Capacity
per Trip
Net Qty
payable
after
deduction
for looseness
Unit of
Rates
Cost for
addl. 50
m or part
thereof
1st 50 m
upto 0.50
km
46 t
57.99 t
27 t
42 cum
46 t
46 t
57.99 t
27 t
42 cum
46 t
tonne
tonne
tonne
cum
toone
15%
15%
15%
15%
15%
3142.26
3142.26
3142.26
3142.26
3142.26
56.81
54.19
116.38
74.82
68.31
10.02
7.95
17.08
10.98
10.02
2298 m
1398 m
999 m
600 m
420 m
300 m
240 m
198 m
162 m
132 m
2298 m
1398 m
999 m
600 m
420 m
300 m
240 m
198 m
162 m
132 m
100
100
100
100
100
100
100
100
100
100
m
m
m
m
m
m
m
m
m
m
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
136.74
224.77
314.54
523.71
748.16
1047.42
1309.28
1587.00
1939.67
2380.50
20.06
32.98
46.16
76.85
109.78
153.70
192.12
232.88
284.63
349.31
1702 m
1391 m
1208 m
805 m
1702 m
1391 m
1208 m
805 m
100
100
100
100
m
m
m
m
15%
15%
15%
15%
3142.26
3142.26
3142.26
3142.26
184.62
225.90
260.12
390.34
27.09
33.15
38.17
57.28
66
1.2.17.5
1.2.17.6
1.2.17.7
1.2.17.8
1.2.17.9
1.2.17.10
1.2.18
1.2.18.1
1.2.18.2
1.2.18.3
1.2.18.4
1.3
Code
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm & 500 mm dia
600, 700, 750 & 800 mm dia
Asbestos cement pipes
50 mm dia
80 mm dia
100 mm dia
150 mm dia
458
366
256
220
165
150
m
m
m
m
m
m
10064
3660
2562
1830
m
m
m
m
m
m
100
100
100
100
100
100
m
m
m
m
m
m
15%
15%
15%
15%
15%
15%
3142.26
3142.26
3142.26
3142.26
3142.26
3142.26
686.08
858.54
1227.45
1428.30
1904.40
2094.84
100.68
125.98
180.11
209.59
279.45
307.40
10064
3660
2562
1830
100
100
100
100
m
m
m
m
15%
15%
15%
15%
3142.26
3142.26
3142.26
3142.26
31.22
85.85
122.65
171.71
4.58
12.60
18.00
25.20
458
366
256
220
165
150
Loading in or unloading cement from the Railway wagon at siding and carrying the same from
or into godowns adjacent to the siding, including stacking the same properly in rows upto any
height as per the direction of Engineer-in-charge, sweeping the wagons and screening the
swept cement and filling in bags complete.
Description
Unit
Quantity
Rate (Rs.)
Amount (Rs.)
Each
3.75
297.00
1113.75
Total
1118.20
167.73
1285.93
55.91
Say
55.90
Beldars
9999
1.4 Loading in or unloading from the Railway wagon as per the direction of Engineer-in-charge.
1.4.1 Steel
Code
Description
Unit
Quantity
Rate (Rs.)
Amount (Rs.)
Each
10.66
297.00
3166.02
474.90
Cost of 44 tonnes
3640.92
82.75
Details of 44 tonnes of
steel
0114
Beldars
67
1: 4 : 2: G.I., CI, R.C.C. or C.C. Pipes Upto 500 mm dia and similar material
Code
Description
Unit
Quantity
Rate (Rs.)
Amount (Rs.)
Beldars
Each
2.00
297.00
594.00
9999
Sundries
L.S.
3.10
1.70
5.27
Total
599.27
89.89
689.16
49.23
Say
49.25
68
EARTH WORK
69
2.1
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m
in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m
and lift up to 1.5 m, disposed soil to be levelled and neatly dressed.
2.1.1
Code
0114
0115
Description
Unit
Quantity
Rate
day
day
7.20
6.00
297.00
297.00
Amount
2138.40
1782.00
3920.40
39.20
3959.60
593.94
4553.54
4553.55
2.2
Earth work in rough excavation, banking excavated earth in layers not exceeding 20
cm in depth, breaking clods, watering, rolling each layer with tonne roller or
wooden or steel rammers, and rolling every 3rd and top-most layer with power roller
of minimum 8 tonnes and dressing up in embankments for roads, flood banks,
marginal banks and guide banks or filling up ground depressions, lead up to 50 m
and lift up to 1.5 m.
2.2.1
Code
0114
0115
0101
0113
0003
1235
2342
9999
Description
Details of cost for 10 cum.
LABOUR:
Beldar
Coolie
Bhisti
Chowkidar
Roller charges
(one roller does 1850 sqm. of consolidation
per day)
Hire charges of Diesel Road Roller - 8 to
10 tonne
Diesel oil
Carriage of Solvent / Diesel.
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
71
Unit
Quantity
Rate
Amount
day
day
day
day
5.90
3.60
0.40
0.008
297.00
297.00
328.00
297.00
1752.30
1069.20
131.20
2.38
day
0.008
1500.00
12.00
litre
quintal
L.S.
0.144
0.0014
2.73
48.63
10.66
1.70
7.00
0.01
4.64
2978.73
29.79
3008.52
451.28
3459.80
345.98
346.00
2.3
2.3.1
Code
0114
0115
0101
0003
0113
1235
2342
9999
2.4
Code
0113
0003
1235
2342
9999
Description
Details of cost for 10 cum.
LABOUR:
Beldar
Coolie
Bhisti
Roller charges
(one roller does 1850 sqm. of consolidation
per day)
Hire charges of Diesel Road Roller - 8 to
10 tonne
Chowkidar
Diesel oil
Carriage of Solvent / Diesel.
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
2.20
3.60
0.40
297.00
297.00
328.00
653.40
1069.20
131.20
day
0.008
1500.00
12.00
day
litre
quintal
L.S.
0.008
0.144
0.0014
2.73
297.00
48.63
10.66
1.70
2.38
7.00
0.01
4.64
1879.83
18.80
1898.63
284.79
2183.42
218.34
218.35
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated
earth in layers not exceeding 20 cm in depth.
Description
Details of cost for 10 cum.
LABOUR:
Chowkidar
Hire charges of Diesel Road Roller - 8 to
10 tonne
Diesel oil
Carriage of Solvent / Diesel.
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
72
Unit
Quantity
Rate
Amount
day
day
0.008
0.008
297.00
1500.00
2.38
12.00
litre
quintal
L.S.
0.144
0.0014
1.82
48.63
10.66
1.70
7.00
0.01
3.09
24.48
0.24
24.72
3.71
28.43
2.84
2.85
2.5
Code
0101
Unit
Quantity
Rate
day
0.40
328.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
Amount
131.20
131.20
1.31
132.51
19.88
152.39
15.24
15.25
2.6
2.6.1
Code
0020
0018
0128
0115
Description
Unit
Quantity
Rate
Amount
day
day
0.04125
0.04125
8000.00
5000.00
330.00
206.25
day
0.40
328.00
131.20
day
2.00
297.00
594.00
1261.45
12.61
1274.06
191.11
1465.17
146.52
146.50
2.7
2.7.1
Ordinary rock.
Code
0020
0017
0132
Description
Unit
Quantity
day
day
day
0.0625
0.0625
0.705
73
Rate
8000.00
1700.00
297.00
Amount
500.00
106.25
209.38
Code
0133
0134
0114
0115
9999
Description
Unit
Quantity
Rock Breaker
Rock Hole Driller
Beldar
Coolie
Sundries
day
day
day
day
L.S.
1.59
0.355
0.50
1.35
10.79
Unit
Quantity
Rate
297.00
297.00
297.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
2.7.2
Code
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999
2.7.3
Code
0020
0017
0132
0133
0135
0103
0114
0115
Amount
472.23
105.43
148.50
400.95
18.34
1961.08
19.61
1980.69
297.10
2277.79
227.78
227.80
0.125
0.125
1.06
2.825
0.885
0.45
1.35
3.93
4.00
16.12
Rate
8000.00
1700.00
297.00
297.00
297.00
297.00
297.00
35.00
15.00
1.70
Amount
1000.00
212.50
314.82
839.03
262.85
133.65
400.95
137.55
60.00
27.40
3388.75
33.89
3422.64
513.40
3936.04
393.60
393.60
Unit
Quantity
day
day
day
day
day
day
day
day
0.125
0.125
2.47
6.00
1.06
0.175
0.75
1.80
74
Rate
8000.00
1700.00
297.00
297.00
328.00
361.00
297.00
297.00
Amount
1000.00
212.50
733.59
1782.00
347.68
63.18
222.75
534.60
Code
9999
Description
Sundries
Unit
Quantity
L.S.
16.12
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
Amount
27.40
4923.70
49.24
4972.94
745.94
5718.88
571.89
571.90
2.8
2.8.1
Code
0020
0018
0128
0115
Description
Unit
Quantity
Rate
Amount
day
day
0.04125
0.04125
8000.00
5000.00
330.00
206.25
day
0.40
328.00
131.20
day
2.05
297.00
608.85
1276.30
12.76
1289.06
193.36
1482.42
148.24
148.25
2.9
2.9.1
Ordinary rock.
Code
0020
0017
0132
0133
0134
0114
0115
Description
Details of cost for 10 cum.
MACHINERY:
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of tipper
LABOUR:
Rock Excavator
Rock Breaker
Rock Hole Driller
Beldar
Coolie
75
Unit
Quantity
Rate
Amount
day
day
0.0625
0.0625
8000.00
1700.00
500.00
106.25
day
day
day
day
day
0.885
1.765
0.53
0.50
1.30
297.00
297.00
297.00
297.00
297.00
262.85
524.20
157.41
148.50
386.10
Code
9999
Description
Sundries
Unit
Quantity
L.S.
13.52
Unit
Quantity
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
2.9.2
Code
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999
2.9.3
Code
0020
0017
0132
0133
0135
0103
0114
0115
Amount
22.98
2108.29
21.08
2129.37
319.41
2448.78
244.88
244.90
Rate
Amount
0.125
0.125
8000.00
1700.00
1000.00
212.50
1.24
3.00
1.06
0.50
1.30
6.42
7.00
18.85
297.00
297.00
297.00
297.00
297.00
35.00
15.00
1.70
368.28
891.00
314.82
148.50
386.10
224.70
105.00
32.04
3682.94
36.83
3719.77
557.97
4277.74
427.77
427.75
Quantity
Rate
Unit
76
Amount
day
day
0.125
0.125
8000.00
1700.00
1000.00
212.50
day
day
day
day
day
day
2.65
6.175
1.06
0.175
0.75
1.50
297.00
297.00
328.00
361.00
297.00
297.00
787.05
1833.98
347.68
63.18
222.75
445.50
Code
9999
Description
Sundries
Unit
Quantity
L.S.
17.94
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
Amount
30.50
4943.14
49.43
4992.57
748.89
5741.46
574.15
574.15
2.10
2.10.1
2.8.1
2.25
Description
Details of cost for 10 cum.
Slope assumed 1 in 200.
Earth work and fillingMinimum depth of trench 60cm.
Average depth = (0.6+1.50)/2 = 1.05
Width for this depth = 0.45 cm
180x0.45xl.05 = 85.05 cum
Rate as per Item Number 2.8.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
Unit
Quantity
Rate
Amount
cum
85.05
148.25
12608.66 A
cum
85.05
101.50
8632.57 A
TOTAL
Cost of 180 metre length of pipe
Cost of 1 metre
Say
21241.23
21241.23
118.01
118.00
2.10.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
Code
Description
Unit
77
Quantity
Rate
Amount
Code
2.8.1
2.25
Description
Rate as per Item Number 2.8.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
Unit
Quantity
Rate
Amount
cum
84.89
148.25
12584.94 A
cum
84.89
101.50
8616.34 A
21201.28
21201.28
192.74
192.75
TOTAL
Cost of 110 metre length of pipe
Cost of 1 metre
Say
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.
Code
2.8.1
2.25
.
2.11
Code
2.8.1
2.25
Description
Details of cost for 60m length of pipe of an
average dia. say 450mm.
Slope assumed 1 in 200.
Earth work and filling Minimum depth of trench = 0.75+0.45= 1.20m
Average depth = (1.50+1.20)/2 =1.35
Width = 0.40 + 0.45 = 0.85 m
60x0.85xl.35 = 68.85 cum
5% for collars = 3.44 cum
Total = 72.29 cum
Rate as per Item Number 2.8.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
TOTAL
Cost of 60 metre length of pipe
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
72.29
148.25
10716.99 A
cum
72.29
101.50
7337.44 A
18054.43
18054.43
300.91
300.90
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth
exceeding 1.5 m, but not exceeding 3 m (Rate is over corresponding basic item
for depth up to 1.5 metre).
Description
Details of cost for 300m length of pipe of an
average dia. say 200mm (rate in percentage).
Slope assumed 1 in 200.
100x0.60x1.75= 105.00 cum
200x0.60x2.00 = 240.00 cum.
Total = 345.00 cum.
Collars 5% = 17.25 cum.
Total = 362.25 cum.
Rate as per Item Number 2.8.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
1/2x200xx1.60x1.00=160 cum
78
Unit
Quantity
Rate
Amount
cum
362.25
148.25
53703.56
cum
362.25
101.50
36768.38
Code
Description
Unit
Quantity
Rate
2.6.1
cum
160.00
146.50
23440.00
cum
160.00
101.50
16240.00
cum
141.75
41.75
5918.06
metre
300.00
192.75
136070.00 X
57825.00 Y
2.25
2.26.1
2.10.1.2
2.12
Code
2.8.1
2.25
2.6.1
2.25
Amount
78245.00 Z
260.82
135.31
135.31
135.00
Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth
exceeding 3 m in depth, but not exceeding 4.5 m (Rate is over corresponding
basic item for depth up to 1.5 metre).
Description
Details of cost for 100 m length of pipe pipe
of an average dia. say 200 mm (rate in
percentage).
Slope assumed 1 in 200. Earth work and filling1x100x0.60x2= 120 cum
Collars 5% = 6 cum.
Total =126 cum.
Rate as per Item Number 2.8.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
Earth work
100x1.60x1.25= 200 cum
Rate as per Item Number 2.6.1 of
SH: Earth work
Rate as per Item Number 2.25 of
SH: Earth work
Extra for additional lift
1x100x0.60x1.50 = 90 cum
2x0.50x100x0.60x0.50 = 30 cum
Tota l=120 cum
Collare 5% = 6
Total = 126 cum.
79
Unit
Quantity
Rate
Amount
cum
126.00
148.25
18679.50
cum
126.00
101.50
12789.00
cum
200.00
146.50
29300.00
cum
200.00
101.50
20300.00
Code
Description
Unit
Quantity
2.26.1
cum
126.00
41.75
5260.50
metre
100.00
192.75
86329.00 X
19275.00 Y
2.10.1.2
Rate
Amount
67054.00 Z
670.54
347.88
347.88
348.00
2.13
Excavating trenches of required width for pipes, cables, etc, including excavation
for sockets, depth up to 1.5 m including getting out the excavated materials,
returning the soil as required in layers not exceeding 20 cm in depth, including
consolidating each deposited layers by ramming, watering etc., stacking
serviceable material for measurements and disposal of unserviceable material as
directed, within a lead of 50 m.
2.13.1
Ordinary rock.
2.9.1
2.25
0114
Description
Details of cost for 180m length of pipe of a
average dia. say 40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
Rate as per Item Number 2.9.1 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL 30055.31
Add Water Charges @ 1% except on A i.e on
(30,055.31 - 29,461.31 =) 594.00
TOTAL
Add CPOH @ 15% except on A i.e on
(30,061.25
- 29,461.31 =) 599.94
Cost of 180 metre length of pipe
Cost of 1 metre
Say
80
Unit
Quantity
Rate
Amount
cum
85.05
244.90
20828.74 A
cum
85.05
101.50
8632.57 A
day
2.00
297.00
594.00
5.94
30061.25
89.99
30151.24
167.51
167.50
2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
Code
2.9.1
2.25
0114
Description
Details of cost for 80m length of pipe of an
average dia. Say 200mm.
Slope assumed 1 in 200
ExcavationMinimum depth of trench.
0.75+0.15+0.20 = 1.10m
Average depth = ( 1.10 + 1.50)/2 = 1.30m
Minimum width of trench = 0.90m
80x0.90x1.30 = 93.60 cum.
Rate as per Item Number 2.9.1 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL 33076.44
Add Water Charges @ 1% except on A i.e on
(33,076.44 - 32,423.04 =) 653.40
TOTAL
Add CPOH @ 15% except on A i.e on
(33,082.97 - 32,423.04 =) 659.93
Cost of 80 metre length of pipe
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
93.60
244.90
22922.64 A
cum
93.60
101.50
9500.40 A
day
2.20
297.00
653.40
6.53
33082.97
98.99
33181.96
414.77
414.75
2.13.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia.
Code
2.9.1
2.25
0114
Description
Details of cost for 30m length of pipe of an
average dia. say 450mm.
Slope assumed 1 in 200.
ExcavationMinimum depth of trench = 0.75+0.15+0.15=
1.35m.
Average depth = (1.35+ 1.50)/2 = 1.425 m.
Width of trench = 0.90 m.
30x0.90x1.425 =38.475 cum.
5% for collors = 1.924 cum
Total = 40.399 cum
Rate as per Item Number 2.9.1 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(14,273.40 - 13,994.22 =) 279.18
TOTAL
Add CPOH @ 15% except on A i.e on
(14,276.19 - 13,994.22 =) 281.97
Cost of 30 metre length of a pipe
Cost of 1 metre
Say
81
Unit
Quantity
Rate
Amount
cum
40.399
244.90
9893.72 A
cum
40.399
101.50
4100.50 A
day
0.94
297.00
279.18
14273.40
2.79
14276.19
42.30
14318.49
477.28
477.30
2.13.2
2.9.2
2.25
0114
Description
Details of cost for 180 m length of a pipe of
a average dia. say 40 mm.
Slope assumed 1 in 200.
ExcavationQuantity same as in item No.2.10.1.1
Rate as per Item Number 2.9.2 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(45,755.21 - 45,012.71 =) 742.50
TOTAL
Add CPOH @ 15% except on A i.e on
(45,762.63 - 45,012.71 =) 749.92
Cost of 180 metre length of pipe
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
85.05
427.75
36380.14 A
cum
85.05
101.50
8632.57 A
day
2.50
297.00
742.50
45755.21
7.42
45762.63
112.49
45875.12
254.86
254.85
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
Code
2.9.2
2.25
0114
Description
Details of cost for 80 m length of a pipe of
an average dia. say 200 mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.2
Rate as per Item Number 2.9.2 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(50,354.55 - 49,537.80 =) 816.75
TOTAL
Add CPOH @ 15% except on A i.e on
(50,362.72 - 49,537.80 =) 824.92
Cost of 80 metre length of pipe
Cost of 1 metre
Say
82
Unit
Quantity
Rate
Amount
cum
93.60
427.75
40037.40 A
cum
93.60
101.50
9500.40 A
day
2.75
297.00
816.75
50354.55
8.17
50362.72
123.74
50486.46
631.08
631.10
2.13.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm dia.
Code
2.9.2
2.25
0114
2.13.3
Description
Details of cost for 30 m length of a pipe of
an average dia. Say 450 mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.3
Rate as per Item Number 2.9.2 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(21,728.66 - 21,381.17 =) 347.49
TOTAL
Add CPOH @ 15% except on A i.e on
(21,732.13 - 21,381.17 =) 350.96
Cost of 30 metre length of pipe
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
40.399
427.75
17280.67 A
cum
40.399
101.50
4100.50 A
day
1.17
297.00
347.49
21728.66
3.47
21732.13
52.64
21784.77
726.16
726.15
2.9.3
2.25
0114
Description
Details of cost for 180 m length of a pipe of
a average dia. say 40 mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
Rate as per Item Number 2.9.3 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(58,206.53 - 57,464.03 =) 742.50
TOTAL
Add CPOH @ 15% except on A i.e on
(58,213.95 - 57,464.03 =) 749.92
Cost of 180 metre length of pipe
Cost of 1 metre
Say
83
Unit
Quantity
Rate
Amount
cum
85.05
574.15
48831.46 A
cum
85.05
101.50
8632.57 A
day
2.50
297.00
742.50
58206.53
7.42
58213.95
112.49
58326.44
324.04
324.05
2.13.3.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
Code
2.9.3
2.25
0114
Description
Details of cost for 80 m length of a pipe of
an average dia. say 200 mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.2
Rate as per Item Number 2.9.3 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(64,057.59 - 63,240.84 =) 816.75
TOTAL
Add CPOH @ 15% except on A i.e on
(64,065.76 - 63,240.84 =) 824.92
Cost of 80 metre length of pipe
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
93.60
574.15
53740.44 A
cum
93.60
101.50
9500.40 A
day
2.75
297.00
816.75
64057.59
8.17
64065.76
123.74
64189.50
802.37
802.35
2.13.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm dia.
Code
2.9.3
2.25
0114
Description
Details of cost for 30 m length of a pipe of
an average dia. say 450 mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No. 2.13.1.3
Rate as per Item Number 2.9.3 of
SH: Earth work
Refilling, ramming and watering
Rate as per Item Number 2.25 of
SH: Earth work
Extra labour for ramming of rock
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(27,643.08 - 27,295.59 =) 347.49
TOTAL
Add CPOH @ 15% except on A i.e on
(27,646.55 - 27,295.59 =) 350.96
Cost of 30 metre length of pipe
Cost of 1 metre
Say
84
Unit
Quantity
Rate
Amount
cum
40.399
574.15
23195.09 A
cum
40.399
101.50
4100.50 A
day
1.17
297.00
347.49
27643.08
3.47
27646.55
52.64
27699.19
923.31
923.30
2.14
Code
2.9.2
2.7.2
2.25
2.26.2
0114
2.13.2.2
2.15
Code
Extra for excavating trenches for pipes, cables, etc. in ordinary / hard rock
exceeding 1.5 m in depth but not exceeding 3 m (Rate is over corresponding basic
item for depth up to 1.5 metre).
Description
Details of cost for 30 m length of a pipe of
an average dia. say 450 mm.
Slope assumed 1 in 200
Excavation100x0.90x1.50 =157.50 cum.
200x0.90x20.00 = 360.00 cum.
= 517.50 cum.
Rate as per Item Number 2.9.2 of SH: Earth
work
0.50x200x1.9x1 = 190 cum.
Rate as per Item Number 2.7.2 of SH: Earth
work Refilling, ramming and watering
517.50+190.00 = 707.50 cum.
Rate as per Item Number 2.25 of SH: Earth
work Extra for additional lift
0.50x300x0.90x1.50 = 202.50 cum.
Rate as per Item Number 2.26.2 of SH: Earth
work Extra labour for ramming of rock
Beldar
TOTAL = 388023.62
Add for WC @ 1% on P
P x 1 / 100 = 4900.50 x 1 / 100 49.01 Q
TOTAL
S + Q = 388023.62 + 49.01
Add for CPOH @ 15% on P + Q
( P + Q ) x 15 / 100 = ( 4900.50 + 49.01 ) x
15 / 100
Cost for 300 m length of pipe
S + Q + R = 388023.62 + 49.01 + 742.43
Rate as per Item Number 2.13.2.2 of SH: Earth
work Extra cost for 300 m
X - Y = 388815.06 - 189330.00
Extra cost for 1 metre
Z / 300 = 199485.06 / 300
Percentage increase over item No. 2.13.2.2
Z x 100 / Y = 199485.06 x 100 / 189330.00
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
cum
517.50
427.75
221360.62
cum
190.00
393.60
74784.00
cum
707.50
101.50
71811.25
cum
202.50
74.90
15167.25
day
16.50
297.00
4900.50 P
388023.62 S
388072.63
742.43 R
metre
300.00
388815.06 X
631.10 189330.00 Y
199485.06 Z
664.95
105.36
105.36
105.00
Extra for excavating trenches for pipes, cables, etc. in ordinary / hard rock
exceeding 3 m in depth but not exceeding 4.5 m (Rate is over corresponding basic
item for depth up to 1.5 metre).
Description
Unit
85
Quantity
Rate
Amount
Code
Description
Unit
Quantity
Rate
2.9.2
cum
180.00
427.75
76995.00
cum
237.50
393.60
93480.00
cum
180.00
74.90
13482.00
cum
417.50
101.50
42376.25
day
9.25
297.00
2747.25 P
229080.50 S
2.7.2
2.26.2
2.25
0114
2.13.2.2
Amount
27.47 Q
229107.97
416.21 R
metre
100.00
631.10
229524.18 X
63110.00 Y
166414.18 Z
1664.14
263.69
263.69
264.00
2.16
2.16.1
Code
1198
Description
Unit
86
Quantity
213.75
Rate
260.00
Amount
5557.50
Code
Description
1197
0302
2204
0112
0114
9999
2.16.2
Code
1198
1197
0302
Unit
Quantity
Rate
Amount
10 cudm
75.00
260.00
1950.00
metre
3.1875
42.00
133.88
cum
day
day
L.S.
1.3125
0.50
1.00
26.91
121.88
361.00
297.00
1.70
159.97
180.50
297.00
45.75
8324.60
83.25
8407.85
1261.18
9669.03
107.43
107.45
Unit
87
Quantity
Rate
Amount
213.75
260.00
5557.50
75.00
260.00
1950.00
3.1875
42.00
133.88
Code
2204
0112
0114
9999
2.16.3
Code
1198
1197
0302
2204
0112
0114
Description
Unit
cum
day
day
L.S.
Quantity
1.3125
0.75
2.00
40.43
Rate
121.88
361.00
297.00
1.70
Amount
159.97
270.75
594.00
68.73
8734.83
87.35
8822.18
1323.33
10145.51
112.73
112.75
Unit
88
Quantity
Rate
Amount
10 cudm
213.75
260.00
5557.50
10 cudm
75.00
260.00
1950.00
metre
3.1875
42.00
133.88
cum
1.3125
121.88
159.97
day
day
1.50
4.00
361.00
297.00
541.50
1188.00
Code
Description
9999
Sundries
Unit
L.S.
Quantity
80.73
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 90 sqm
Cost of 1 sqm
Say
Amount
137.24
9668.09
96.68
9764.77
1464.72
11229.49
124.77
124.75
2.17
Close timbering in case of shafts, wells, cesspits, manholes and the like including
strutting, shoring and packing cavities (wherever required) etc. complete
(Measurements to be taken of the face area timbered).
2.17.1
Code
1198
1197
0302
2204
0112
0114
Description
Unit
Quantity
89
Rate
Amount
260.00
407.88
260.00
133.25
42.00
17.30
121.88
12.61
361.00
297.00
21.66
35.64
Code
Description
9999
Sundries
Unit
L.S.
Quantity
2.73
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6.6 sqm
Cost of 1 sqm
Say
2.17.2
Code
1198
1197
0302
2204
0112
0114
9999
Amount
4.64
632.98
6.33
639.31
95.90
735.21
111.40
111.40
Unit
90
Quantity
Rate
Amount
10 cudm 15.6875
260.00
407.88
10 cudm
5.125
260.00
133.25
metre
0.4118
42.00
17.30
cum
0.1035
121.88
12.61
day
day
L.S.
0.12
0.25
5.46
361.00
297.00
1.70
43.32
74.25
9.28
697.89
6.98
704.87
105.73
810.60
122.82
122.80
2.17.3
Code
1198
1197
0302
2204
0112
0114
9999
Unit
Quantity
Rate
Amount
260.00
407.88
260.00
133.25
42.00
17.30
121.88
12.61
361.00
297.00
1.70
68.59
112.86
13.70
766.19
7.66
773.85
116.08
889.93
134.84
134.85
2.18
Close timbering over areas including strutting, shoring and packing cavities (wherever
required) etc. complete (Measurements to be taken of the face area timbered).
2.18.1
Code
Description
Unit
91
Quantity
Rate
Amount
Code
1198
1197
0302
2204
0112
0114
9999
2.18.2
Code
1198
Description
Unit
Quantity
75% of cost
Poling boards of
Second class kail wood in planks
10 cudm 106.875
250x38mm : 45x0.038 = 1.71 cum = 1.710 cudm
Qty taken for cost of using once after
deducting for credit = 1710xx = 106.875 cudm
Wallings l00mmx 100mm of
Second class kail wood in scantling
10 cudm
18.75
100x100mm : 30x0.10x0.10 = 0.30cum = 300
cudm
Qty taken for cost of using once after
deducting for credit = 300xx = 18.75 cudm
Raking struts
Safeda ballies 125 mm diameter
metre
1.59
17 x 1.50 =25.5m
Qty taken for cost of using once
after deducting for credit = 25.5xx = 1.59 m
CARRIAGE:
Poling boards = 1.71 cum
Walling = 0.30cum
Rakingstruts3.14/4x(0.125)2 = 0.313cum
Total of carriage = 2.323 cum x = 0.581 cum
Carriage of timber
cum
0.581
LABOUR:
Carpenter 2nd class
day
0.25
Beldar
day
0.50
Sundries
L.S.
31.46
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 45 sqm
Cost of 1 sqm
Say
Rate
Amount
260.00
2778.75
260.00
487.50
42.00
66.78
121.88
70.81
361.00
297.00
1.70
90.25
148.50
53.48
3696.07
36.96
3733.03
559.95
4292.98
95.40
95.40
Unit
Quantity
92
Rate
260.00
Amount
2778.75
Code
Description
1197
0302
2204
0112
0114
9999
2.18.3
Code
1198
1197
Unit
Quantity
Rate
Amount
10 cudm
18.75
260.00
487.50
metre
1.59
42.00
66.78
cum
0.581
121.88
70.81
day
day
L.S.
0.50
1.00
34.06
361.00
297.00
1.70
180.50
297.00
57.90
3939.24
39.39
3978.63
596.79
4575.42
101.68
101.70
Unit
Quantity
93
Rate
Amount
260.00
2778.75
260.00
487.50
Code
Description
0302
2204
0112
0114
9999
2.19
Code
1198
1197
0302
2204
Unit
Quantity
Rate
Amount
metre
1.59
42.00
66.78
cum
0.581
121.88
70.81
day
day
L.S.
0.75
1.50
47.58
361.00
297.00
1.70
270.75
445.50
80.89
4200.98
42.01
4242.99
636.45
4879.44
108.43
108.45
Extra for planking, strutting and packing materials for cavities (in close timbering) if
required to be left permanently in position (Face area of timber permanently left to be
measured).
Description
Unit
94
10 cudm
Quantity
Rate
Amount
2992.5
260.00
77805.00
10 cudm 1050.00
260.00
27300.00
metre
44.63
42.00
1874.46
cum
2.675
121.88
326.03
Code
Description
Unit
Quantity
Rate
Amount
107305.49
1073.05
108378.54
16256.78
124635.32
1384.84
1384.85
2.20
2.20.1
Code
1198
1197
0302
2204
0112
0114
9999
Description
Unit
95
Quantity
Rate
Amount
71.25
260.00
1852.50
75.00
260.00
1950.00
3.18
42.00
133.56
0.74
121.88
90.19
0.25
0.50
19.76
361.00
297.00
1.70
90.25
148.50
33.59
4298.59
42.99
4341.58
651.24
4992.82
55.48
55.50
2.20.2
Code
1198
1197
0302
2204
0112
0114
9999
2.20.3
Code
Unit
Quantity
Rate
Amount
71.25
260.00
1852.50
75.00
260.00
1950.00
3.18
42.00
133.56
0.74
121.88
90.19
0.50
1.00
33.15
361.00
297.00
1.70
180.50
297.00
56.36
4560.11
45.60
4605.71
690.86
5296.57
58.85
58.85
Unit
96
Quantity
Rate
Amount
Code
Description
1198
1197
0302
2204
0112
0114
9999
Unit
Quantity
Rate
Amount
71.25
260.00
1852.50
75.00
260.00
1950.00
3.18
42.00
133.56
0.74
121.88
90.19
1.00
1.75
46.67
361.00
297.00
1.70
361.00
519.75
79.34
4986.34
49.86
5036.20
755.43
5791.63
64.35
64.35
2.21
Open timbering in case of shafts, wells, cesspits, manholes and the like including
strutting and shoring complete (Measurements to be taken of the face area timbered).
2.21.1
Code
1198
Description
Unit
97
Quantity
5.375
Rate
260.00
Amount
139.75
Code
1197
0302
2204
0112
0114
9999
2.21.2
Code
1198
1197
0302
Description
Unit
Walling l00mmxl00mm of
Second class kail wood in scantling
4x 1.2x0.1 x0.1 = 0.048 cum = 48 cudm
Qty taken for cost of using once
after deducting for credit = 486xx = 3 cudm
Struts of
Safeda ballies 125 mm diameter
(4x1.0=4.0)+(2x1.2=2.4) = 6.4m
Qty taken for cost of using once
after deducting for credit = 6.4xx = 0.40 m
CARRIAGE:
Poling boards = 0.086 cum
Walling = 0.048 cum
Bailies struts 3.14/4x(0.125)2 x 6.4 = 0.079 cum
Total of carriage = 0.213 cum x = 0.053 cum
Carriage of timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6.6 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
10 cudm
3.00
260.00
78.00
metre
0.40
42.00
16.80
cum
0.053
121.88
6.46
day
day
L.S.
0.03
0.06
1.82
361.00
297.00
1.70
10.83
17.82
3.09
272.75
2.73
275.48
41.32
316.80
48.00
48.00
Unit
98
Quantity
Rate
Amount
5.375
260.00
139.75
3.00
260.00
78.00
0.40
42.00
16.80
Code
2204
0112
0114
9999
2.21.3
Code
1198
1197
0302
2204
0112
Description
Unit
CARRIAGE:
Poling boards = 0.086 cum
Walling = 0.048 cum
Bailies struts 3.14/4x(0.125)2 x 6.4 = 0.079 cum
Total of carriage = 0.213 cum x = 0.053 cum
Carriage of timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6.6 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
cum
0.053
121.88
6.46
day
day
L.S.
0.06
0.12
2.73
361.00
297.00
1.70
21.66
35.64
4.64
302.95
3.03
305.98
45.90
351.88
53.32
53.30
Unit
99
Quantity
Rate
Amount
5.375
260.00
139.75
3.00
260.00
78.00
0.40
42.00
16.80
0.053
121.88
6.46
0.10
361.00
36.10
Code
Description
0114
9999
Beldar
Sundries
Unit
day
L.S.
Quantity
0.20
3.64
Rate
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6.6 sqm
Cost of 1 sqm
Say
Amount
59.40
6.19
342.70
3.43
346.13
51.92
398.05
60.31
60.30
2.22
Open timbering over areas including strutting, shoring etc. complete (Measurements
to be taken of the face area timbered).
2.22.1
Code
1198
0302
2204
0112
0114
9999
Description
Unit
100
Quantity
Rate
Amount
35.625
260.00
926.25
3.75
42.00
157.50
0.3275
121.88
39.92
0.12
0.25
19.76
361.00
297.00
1.70
43.32
74.25
33.59
1274.83
12.75
1287.58
193.14
1480.72
32.90
32.90
2.22.2
Code
1198
0302
2204
0112
0114
9999
2.22.3
Code
1198
Unit
Quantity
Rate
Amount
35.625
260.00
926.25
3.75
42.00
157.50
0.3275
121.88
39.92
0.25
0.50
33.15
361.00
297.00
1.70
90.25
148.50
56.36
1418.78
14.19
1432.97
214.95
1647.92
36.62
36.60
Unit
101
10 cudm
Quantity
35.625
Rate
260.00
Amount
926.25
Code
Description
0302
2204
0112
0114
9999
2.23
Code
1198
1197
0302
2204
Unit
Quantity
Rate
Amount
metre
3.75
42.00
157.50
cum
0.3275
121.88
39.92
day
day
L.S.
0.50
0.88
47.58
361.00
297.00
1.70
180.50
261.36
80.89
1646.42
16.46
1662.88
249.43
1912.31
42.50
42.50
Extra for planking and strutting in open timbering if required to be left permanently in
position (Face area of the timber permanently left to be measured).
Description
Unit
102
10 cudm
Quantity
Rate
Amount
997.50
260.00
25935.00
10 cudm 1050.00
260.00
27300.00
metre
44.63
42.00
1874.46
cum
1.485
121.88
180.99
Code
Description
Unit
Quantity
Rate
Amount
55290.45
552.90
55843.35
8376.50
64219.85
713.55
713.55
2.24
2.24.1
Code
Description
Unit
Quantity
Rate
2.24.2
Code
Amount
20.00
20.00
20.00
Unit
103
Quantity
Rate
Amount
25.00
Code
Description
Unit
Quantity
Rate
2.25
Amount
25.00
25.00
Code
Description
Unit
0128
0115
0101
day
day
day
Quantity
0.20
2.50
0.20
Rate
328.00
297.00
328.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
Amount
65.60
742.50
65.60
873.70
8.74
882.44
132.37
1014.81
101.48
101.50
2.26
Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated
or stacked materials.
2.26.1
Code
Description
Unit
0128
0114
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
104
Quantity
0.10
1.10
Rate
328.00
297.00
Amount
32.80
326.70
359.50
3.60
363.10
54.46
417.56
41.76
41.75
2.26.2
Code
Description
Unit
0128
0114
day
day
Quantity
0.20
1.95
Rate
328.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
2.27
Code
6501
2335
0114
0115
0101
Amount
65.60
579.15
644.75
6.45
651.20
97.68
748.88
74.89
74.90
Supplying and filling in plinth with Jamuna sand under floors, including watering,
ramming consolidating and dressing complete.
Description
Unit
Quantity
Rate
Amount
cum
cum
10.00
10.00
550.00
106.64
5500.00
1066.40
day
day
day
0.89
1.07
0.35
297.00
297.00
328.00
264.33
317.79
114.80
7263.32
72.63
7335.95
1100.39
8436.34
843.63
843.65
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
2.28
Surface dressing of the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
2.28.1
Code
Description
Unit
0114
0115
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Say
105
Quantity
1.97
1.29
Rate
297.00
297.00
Amount
585.09
383.13
968.22
9.68
977.90
146.68
1124.58
1124.60
2.29
Ploughing the existing ground to a depth of 15 cmto 25 cmand watering the same.
2.29.1
Code
Description
Unit
0114
0101
day
day
Quantity
2.75
0.50
Rate
297.00
328.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Say
Amount
816.75
164.00
980.75
9.81
990.56
148.58
1139.14
1139.15
2.30
Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the
excavated soil, then returning the soil as required in layers not exceeding 20 cm
in depth, including consolidating each deposited layer by ramming, watering etc,
disposing of surplus excavated soil; as directed within a lead of 50 m and lift
up to 1.5 m.
2.30.1
Code
2.8.1
9999
2.30.2
Code
2.9.1
Description
Unit
Quantity
Rate
Amount
cum
3.00
148.25
444.75 A
L.S.
13.52
1.70
22.98
467.73
0.23
3.48
471.44
47.14
47.15
Ordinary rock.
Description
Unit
106
cum
Quantity
3.00
Rate
244.90
Amount
734.70 A
Code
Description
9999
Sundries
Unit
L.S.
Quantity
13.52
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(757.68 - 734.70 =) 22.98
TOTAL
Add CPOH @ 15% except on A i.e on
(757.91 - 734.70 =) 23.21
Cost of 10 holes
Cost of each
Say
2.30.3
Code
2.9.2
9999
2.30.4
Code
2.9.3
9999
Amount
22.98
757.68
0.23
757.91
3.48
761.39
76.14
76.15
Unit
Quantity
Rate
Amount
cum
3.00
427.75
1283.25 A
L.S.
13.52
1.70
22.98
1306.23
0.23
1306.46
3.48
1309.94
130.99
131.00
Unit
107
Quantity
Rate
Amount
cum
3.00
574.15
1722.45 A
L.S.
13.52
1.70
22.98
1745.43
0.23
1745.66
3.48
1749.14
174.91
174.90
2.31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and
saplings of girth up to 30 cm measured at a height of 1 m above ground level and
removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Code
Description
Unit
0114
0115
Quantity
day
day
1.08
0.60
Rate
297.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Say
2.32
Amount
320.76
178.20
498.96
4.99
503.95
75.59
579.54
579.55
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery
of the area cleared.
Code
Description
Unit
0114
0115
9999
Quantity
day
day
L.S.
0.60
0.25
1.82
Rate
297.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Say
Amount
178.20
74.25
3.09
255.54
2.56
258.10
38.72
296.82
296.80
2.33
Felling trees of the girth (measured at a height of 1 m above ground level) including
cutting of trunks and branches, removing the roots and stacking of serviceable material
and disposal of unserviceable material.
2.33.1
Code
Description
0114
0115
Unit
108
day
day
Quantity
0.33
0.17
Rate
297.00
297.00
Amount
98.01
50.49
Code
Description
9999
Sundries
Unit
Quantity
L.S.
2.73
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
2.33.2
Code
0114
0115
9999
2.33.3
Code
0114
0115
9999
Amount
4.64
153.14
1.53
154.67
23.20
177.87
177.85
Unit
Quantity
day
day
L.S.
1.50
0.75
5.46
Rate
297.00
297.00
1.70
Amount
445.50
222.75
9.28
677.53
6.78
684.31
102.65
786.96
786.95
Unit
109
day
day
L.S.
Quantity
7.00
3.50
8.06
Rate
297.00
297.00
1.70
Amount
2079.00
1039.50
13.70
3132.20
31.32
3163.52
474.53
3638.05
3638.05
2.33.4
Code
0114
0115
9999
Unit
day
day
L.S.
Quantity
14.00
7.00
26.91
Rate
297.00
297.00
1.70
Amount
4158.00
2079.00
45.75
6282.75
62.83
6345.58
951.84
7297.42
7297.40
2.34
2.34.1
Code
7022
2342
Description
Unit
litre
quintal
Quantity
100.00
1.00
Rate
160.00
10.66
Amount
16000.00
10.66
16010.66
160.11
16170.77
2425.62
18596.39
185.96
185.95
2.35
2.35.1
Along external wall where the apron is not provided using chemical emulsion @
7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm
including excavation channel along the wall & rodding etc. complete.
Description
Unit
110
Quantity
Rate
Amount
Code
0114
9999
2.35.2
Description
Unit
Quantity
Rate
Amount
day
0.33
297.00
98.01
L.S.
13.52
1.70
22.98
120.99
1.21
122.20
18.33
140.53
14.05
14.05
Along the external wall below concrete or masonry apron using chemical emulsion
@ 2.25 litres per linear metre including drilling and plugging holes etc.
0114
9999
Description
Unit
111
Quantity
Rate
Amount
day
0.40
297.00
118.80
L.S.
35.88
1.70
61.00
179.80
1.80
181.60
27.24
208.84
20.88
20.90
2.35.3
Treatment of soil under existing floors using chemical emulsion @ one litre per
hole, 300 mm apart including drilling 12 mm diameter holes and plugging with
cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor.
0114
0124
9999
2.35.4
Description
Unit
Quantity
Rate
Amount
day
2.00
297.00
594.00
day
L.S.
0.50
35.88
361.00
1.70
180.50
61.00
835.50
8.36
843.86
126.58
970.44
107.83
107.85
Treatment of existing masonry using chemical emulsion @ one litre per hole at
300 mm interval including drilling holes at 45 degree and plugging them with cement
mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole.
0114
0124
Description
Unit
112
Quantity
Rate
Amount
day
0.30
297.00
89.10
day
0.05
361.00
18.05
Code
Description
Unit
9999
L.S.
Quantity
17.94
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 metre
Cost of 1 metre
Say
2.35.5
Description
0771
0112
9999
2.36
Code
0128
30.50
137.65
1.38
139.03
20.85
159.88
15.99
16.00
Code
0114
Amount
Unit
Quantity
Rate
Amount
litre
day
32.30
0.20
45.00
361.00
1453.50
72.20
day
0.20
297.00
59.40
L.S.
17.94
1.70
30.50
1615.60
16.16
1631.76
244.76
1876.52
187.65
187.65
Unit
day
113
Quantity
0.08
Rate
328.00
Amount
26.24
Code
Description
0115
Coolie
Unit
day
Quantity
0.80
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
2.37
Code
2262
2.38
Amount
237.60
263.84
2.64
266.48
39.97
306.45
30.65
30.65
Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage,
loading , unloading & stacking up to any lead (measured stacks will be reduced by
20% for payment).
Description
Unit
Quantity
Rate
Amount
cum
1.00
7.75
7.75
cum
1.00
106.64
106.64
114.39
1.14
115.53
17.33
132.86
132.85
Filling with available fly ash and earth (excluding rock) in trenches or embankment
in layers (each layer should not exceed 15 cm), with intermediate layer of
compacted earth (Soil density of 98%) after every four layers of compacted depth
of fly ash, sides & top layer of filling shall be done with earth having total minimum
compacted thickness 30 cm or as decided by Engineer in-charge, including
compacting each layer by rolling/ ramming and watering , all complete as per
drawing and direction of Engineer -in - charge.
Code
Description
Unit
0128
0115
0101
day
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 cum
Cost of 1 cum
Say
114
Quantity
0.20
2.50
0.20
Rate
328.00
297.00
328.00
Amount
65.60
742.50
65.60
873.70
8.74
882.44
132.37
1014.81
101.48
101.50
MORTARS
115
3.1
Code
0367
2209
0983
2261
0114
0101
9999
9999
3.2
Code
0367
2209
0983
2261
0114
0101
9999
9999
3.3
Code
0367
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
1.02
1.02
0.7125
0.7125
5240.00
94.80
650.00
106.64
5344.80
96.70
463.12
75.98
day
day
L.S.
L.S.
0.75
0.07
26.90
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.73
22.98
6295.02
6295.02
6295.00
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
5240.00
94.80
650.00
106.64
3563.20
64.46
617.50
101.31
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
4660.91
4660.91
4660.90
Description
Unit
Quantity
tonne
117
0.51
Rate
5240.00
Amount
2672.40
Code
2209
0983
2261
0114
0101
9999
9999
3.4
Code
0367
2209
0983
2261
0114
0101
9999
9999
3.5
Code
0367
2209
0983
2261
Description
Unit
Quantity
Rate
Amount
Carriage of cement
Fine sand (zone IV)
Carriage of fine sand (1 part badarpur sand: 2
parts jamuna sand)
LABOUR:
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
TOTAL
Cost of 1 cum
Say
tonne
cum
cum
0.51
1.07
1.07
94.80
650.00
106.64
48.35
695.50
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
3844.79
3844.79
3844.80
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.38
0.38
1.07
1.07
5240.00
94.80
650.00
106.64
1991.20
36.02
695.50
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
3151.26
3151.26
3151.25
Description
Unit
Quantity
tonne
tonne
cum
cum
118
0.31
0.31
1.07
1.07
Rate
5240.00
94.80
650.00
106.64
Amount
1624.40
29.39
695.50
114.10
Code
0114
0101
9999
9999
3.6
Code
0367
2209
0983
2261
0114
0101
9999
9999
3.7
Code
0367
2209
0982
2203
0114
0101
9999
9999
Description
Unit
Quantity
Beldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
TOTAL
Cost of 1 cum
Say
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
Unit
Quantity
Rate
297.00
328.00
1.70
1.70
Amount
222.75
22.96
45.75
22.98
2777.83
2777.83
2777.85
Rate
Amount
tonne
tonne
cum
cum
0.25
0.25
1.07
1.07
5240.00
94.80
650.00
106.64
1310.00
23.70
695.50
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
2457.74
2457.74
2457.75
Unit
119
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
5240.00
94.80
1120.00
106.64
3563.20
64.46
1064.00
101.31
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
5107.41
5107.41
5107.40
3.8
Code
0367
2209
0982
2203
0114
0101
9999
9999
3.9
Code
0367
2209
0982
2203
0114
0101
9999
9999
3.10
Code
0367
2209
0982
2203
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.51
0.51
1.07
1.07
5240.00
94.80
1120.00
106.64
2672.40
48.35
1198.40
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
4347.69
4347.69
4347.70
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.38
0.38
1.07
1.07
5240.00
94.80
1120.00
106.64
1991.20
36.02
1198.40
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
3654.16
3654.16
3654.15
Unit
tonne
tonne
cum
cum
120
Quantity
0.31
0.31
1.07
1.07
Rate
5240.00
94.80
1120.00
106.64
Amount
1624.40
29.39
1198.40
114.10
Code
0114
0101
9999
9999
3.11
Code
0367
2209
0982
2203
0114
0101
9999
9999
3.12
Code
0367
2209
1159
2267
0114
0101
9999
9999
Description
LABOUR:
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
TOTAL
Cost of 1 cum
Say
Unit
Quantity
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
Rate
297.00
328.00
1.70
1.70
Amount
222.75
22.96
45.75
22.98
3280.73
3280.73
3280.75
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.25
0.25
1.07
1.07
5240.00
94.80
1120.00
106.64
1310.00
23.70
1198.40
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
2960.64
2960.64
2960.65
Unit
121
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
5240.00
94.80
1000.00
106.64
3563.20
64.46
950.00
101.31
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
4993.41
4993.41
4993.40
3.13
Code
0367
2209
0784
2268
0114
0101
9999
9999
3.14
Code
0367
2209
0784
2268
0114
0101
9999
9999
3.15
Code
0368
2209
0784
2268
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
5240.00
94.80
1000.00
106.64
3563.20
64.46
950.00
101.31
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
4993.41
4993.41
4993.40
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.31
0.31
1.07
1.07
5240.00
94.80
1000.00
106.64
1624.40
29.39
1070.00
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
3152.33
3152.33
3152.35
Unit
tonne
tonne
cum
cum
122
Quantity
0.68
0.68
0.95
0.95
Rate
14000.00
94.80
1000.00
106.64
Amount
9520.00
64.46
950.00
101.31
Code
0114
0101
9999
9999
3.16
Code
0368
2209
0784
2268
0114
0101
9999
9999
3.17
Code
0368
2209
0784
2268
0114
0101
9999
9999
Description
LABOUR:
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
TOTAL
Cost of 1 cum
Say
Unit
Quantity
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
Rate
297.00
328.00
1.70
1.70
Amount
222.75
22.96
45.75
22.98
10950.21
10950.21
10950.20
Unit
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.51
0.51
1.07
1.07
14000.00
94.80
1000.00
106.64
7140.00
48.35
1070.00
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
8686.89
8686.89
8686.90
Unit
123
Quantity
Rate
Amount
tonne
tonne
cum
cum
0.31
0.31
1.07
1.07
14000.00
94.80
1000.00
106.64
4340.00
29.39
1070.00
114.10
day
day
L.S.
L.S.
0.75
0.07
26.91
13.52
297.00
328.00
1.70
1.70
222.75
22.96
45.75
22.98
5867.93
5867.93
5867.95
3.18
Code
0811
0114
0101
9999
Mud mortar.
Description
Details of cost for.
MATERIAL:
Mud (dry)
LABOUR:
Beldar
Bhisti
Sundries
Unit
Quantity
Rate
cum
1.08
60.00
64.80
day
day
L.S.
0.63
0.315
6.45
297.00
328.00
1.70
187.11
103.32
10.96
366.19
366.19
366.20
TOTAL
Cost of 1 cum
Say
3.19
Code
1182
0773
0784
2268
2208
0114
0101
9999
9999
Amount
Mortar in lime , surkhi ( 50% red and 50% light yellow) and marble dust 1:1.5:0.5.
Description
Unit
124
Quantity
Rate
Amount
cum
quintal
cum
cum
cum
0.7125
3.01
0.24
0.24
3.01
700.00
300.00
1000.00
106.64
106.64
498.75
903.00
240.00
25.59
320.99
day
day
L.S.
L.S.
0.90
0.45
10.35
5.20
297.00
328.00
1.70
1.70
267.30
147.60
17.60
8.84
2429.67
2429.67
2429.65
CONCRETE WORK
125
4.1
4.1.1
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1.2
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level.
1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size).
Description
Unit
Quantity
Rate
Amount
cum
0.64
1200.00
768.00
cum
0.21
1050.00
220.50
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.61
1120.00
106.64
5240.00
476.00
45.32
3196.40
tonne
0.61
94.80
57.83
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
5709.16
57.09
5766.25
864.94
6631.19
6631.20
127
Unit
Quantity
Rate
Amount
cum
0.57
1200.00
684.00
cum
0.28
1050.00
294.00
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.40
1120.00
106.64
5240.00
476.00
45.32
2096.00
tonne
0.40
94.80
37.92
day
day
day
0.10
1.63
0.70
377.00
297.00
328.00
37.70
484.11
229.60
Code
0002
0012
9999
4.1.3
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1.4
Code
0293
Description
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
0.07
800.00
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
4578.35
45.78
4624.13
693.62
5317.75
5317.75
Unit
Quantity
Rate
Amount
cum
0.67
1200.00
804.00
cum
0.22
1050.00
231.00
cum
0.89
106.64
94.91
cum
cum
tonne
0.445
0.445
0.32
1120.00
106.64
5240.00
498.40
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
4237.37
42.37
4279.74
641.96
4921.70
4921.70
Unit
Quantity
cum
0.52
128
Rate
1000.00
Amount
520.00
Code
0295
0297
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1.5
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
Description
Unit
Quantity
Rate
Amount
cum
0.22
1200.00
264.00
cum
0.11
1050.00
115.50
cum
0.52
115.92
60.28
cum
0.33
106.64
35.19
cum
cum
tonne
0.445
0.445
0.32
1120.00
106.64
5240.00
498.40
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
13.52
325.00
1.70
22.75
22.98
4101.10
41.01
4142.11
621.32
4763.43
4763.45
129
Unit
Quantity
Rate
Amount
cum
0.70
1200.00
840.00
cum
0.24
1050.00
252.00
cum
0.94
106.64
100.24
cum
cum
tonne
0.47
0.47
0.22
1120.00
106.64
5240.00
526.40
50.12
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
0.07
325.00
22.75
Code
9999
Description
Sundries
Unit
Quantity
L.S.
13.52
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
4.1.6
Code
0293
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1.7
Code
0293
0295
Amount
22.98
3795.56
37.96
3833.52
575.03
4408.55
4408.55
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
0.47
0.47
0.22
1120.00
106.64
5240.00
526.40
50.12
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
13.52
325.00
1.70
22.75
22.98
3642.26
36.42
3678.68
551.80
4230.48
4230.50
130
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
Code
2206
2202
0983
2261
0367
2209
0155
0114
0101
0002
0012
9999
4.1.8
Code
0293
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
Description
Unit
Quantity
Rate
Amount
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
0.47
0.47
650.00
106.64
305.50
50.12
tonne
0.22
5240.00
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
13.52
325.00
1.70
22.75
22.98
3421.36
34.21
3455.57
518.34
3973.91
3973.90
131
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
0.47
0.47
0.17
1120.00
106.64
5240.00
526.40
50.12
890.80
tonne
0.17
94.80
16.12
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
0.07
325.00
22.75
Code
9999
Description
Sundries
Unit
Quantity
L.S.
13.52
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
4.1.9
Code
0293
0295
2206
2202
0983
2261
0367
2209
0155
0114
0101
0002
0012
9999
Amount
22.98
3375.52
33.76
3409.28
511.39
3920.67
3920.65
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
0.47
0.47
650.00
106.64
305.50
50.12
tonne
0.17
5240.00
890.80
tonne
0.17
94.80
16.12
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
13.52
325.00
1.70
22.75
22.98
3154.62
31.55
3186.17
477.93
3664.10
3664.10
4.1.10 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).
Code
0293
Description
Unit
Quantity
cum
0.65
132
Rate
1000.00
Amount
650.00
Code
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Description
Unit
Quantity
Rate
Amount
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
0.47
0.47
0.13
1120.00
106.64
5240.00
526.40
50.12
681.20
tonne
0.13
94.80
12.32
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
13.52
325.00
1.70
22.75
22.98
3162.12
31.62
3193.74
479.06
3672.80
3672.80
4.1.11 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).
Code
0293
0295
2206
2202
0983
2261
0367
2209
0155
0114
0101
0002
0012
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 40 mm
nominal size
(0.70 cum - 7.5% for voids i.e. 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm
nominal size
Carriage of stone aggregate 40 mm nominal
size and above
Carriage of stone aggregate below 40 mm
nominal size
Fine sand (zone IV)
Carriage of fine sand (1 part badarpur sand: 2
parts jamuna sand)
Portland Cement
(0.2225 cum)
Carriage of cement
LABOUR:
Mason (average)
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
133
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
0.47
0.47
650.00
106.64
305.50
50.12
tonne
0.13
5240.00
681.20
tonne
0.13
94.80
12.32
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
0.07
325.00
22.75
Code
9999
Description
Sundries
Unit
Quantity
L.S.
8.97
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Amount
15.25
2933.49
29.33
2962.82
444.42
3407.24
3407.25
4.1.12 1:2:3:9 (1 ordinary portland cement : 2 Fly ash : 3 coarse sand : 9 graded stone
aggregate 40 mm nominal size).
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
0155
0114
0101
0002
0012
9999
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 40 mm
nominal size
(0.70 cum-7.5% for voids i.e. 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm
nominal size
Carriage of stone aggregate 40 mm nominal
size and above
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Fly ash
Carriage of flyash
Portland Cement
Carriage of cement
LABOUR:
Mason (average)
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
0.37
0.37
0.21
0.21
0.17
0.17
1120.00
106.64
7.75
106.64
5240.00
94.80
414.40
39.46
1.63
22.39
890.80
16.12
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
3278.21
32.78
3310.99
496.65
3807.64
3807.65
4.1.13 1:2:4: 11 (1 ordinary portland cement : 2 fly ash : 4 coarse sand : 11 graded stone
aggregate 40 mm nominal size).
Code
0293
Description
Unit
Quantity
cum
0.65
134
Rate
1000.00
Amount
650.00
Code
0295
2206
2202
0982
2203
1980
2262
0367
2209
0155
0114
0101
0002
0012
9999
Description
Unit
Quantity
Rate
Amount
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
0.34
0.34
0.21
0.21
0.13
0.13
1120.00
106.64
7.75
106.64
5240.00
94.80
380.80
36.26
1.63
22.39
681.20
12.32
day
day
day
day
0.10
1.63
0.70
0.07
377.00
297.00
328.00
800.00
37.70
484.11
229.60
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
3028.01
30.28
3058.29
458.74
3517.03
3517.05
4.2
Providing and laying cement concrete in retaining walls, return walls, walls (any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding
the cost of centering, shuttering and finishing.
4.2.1
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.425 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
135
Unit
Quantity
Rate
Amount
cum
0.64
1200.00
768.00
cum
0.21
1050.00
220.50
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.61
1120.00
106.64
5240.00
476.00
45.32
3196.40
tonne
0.61
94.80
57.83
day
day
0.90
0.78
297.00
297.00
267.30
231.66
Code
0101
0123
0124
0002
0012
9999
9999
0115
4.2.2
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Description
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Scaffolding
Sundries
Extra labour for lifting.material upto floor
level = 0.75x2.5 = 1.88
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
0.70
0.06
0.06
0.07
328.00
393.00
361.00
800.00
229.60
23.58
21.66
56.00
day
L.S.
L.S.
0.07
114.40
14.30
325.00
1.70
1.70
22.75
194.48
24.31
day
1.88
297.00
558.36
6484.39
64.84
6549.23
982.38
7531.61
7531.60
136
Unit
Quantity
Rate
Amount
cum
0.57
1200.00
684.00
cum
0.28
1050.00
294.00
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.40
1120.00
106.64
5240.00
476.00
45.32
2096.00
tonne
0.40
94.80
37.92
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
day
0.07
114.40
14.30
1.88
325.00
1.70
1.70
297.00
22.75
194.48
24.31
558.36
5353.58
53.54
5407.12
811.07
6218.19
6218.20
4.2.3
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2.4
Code
0293
0295
0297
2206
2202
0982
Unit
Quantity
Rate
Amount
cum
0.67
1200.00
804.00
cum
0.22
1050.00
231.00
cum
0.89
106.64
94.91
cum
cum
tonne
0.445
0.445
0.32
1120.00
106.64
5240.00
498.40
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
day
0.07
114.40
14.30
1.88
325.00
1.70
1.70
297.00
22.75
194.48
24.31
558.36
5012.60
50.13
5062.73
759.41
5822.14
5822.15
137
Unit
Quantity
Rate
Amount
cum
0.52
1000.00
520.00
cum
0.22
1200.00
264.00
cum
0.11
1050.00
115.50
cum
0.52
115.92
60.28
cum
0.33
106.64
35.19
cum
0.445
1120.00
498.40
Code
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2.5
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
Description
Unit
Quantity
Rate
Amount
cum
tonne
0.445
0.32
106.64
5240.00
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
day
0.07
114.40
13.52
1.88
325.00
1.70
1.70
297.00
22.75
194.48
22.98
558.36
4876.33
48.76
4925.09
738.76
5663.85
5663.85
138
Unit
Quantity
Rate
Amount
cum
0.70
1200.00
840.00
cum
0.24
1050.00
252.00
cum
0.94
106.64
100.24
cum
cum
tonne
0.47
0.47
0.22
1120.00
106.64
5240.00
526.40
50.12
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
0.07
114.40
13.52
325.00
1.70
1.70
22.75
194.48
22.98
Code
0115
4.2.6
Code
0293
0295
2206
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Description
Coolie
Extra labour for lifting.material upto floor
level = 0.75x2.50 = 1.88
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
day
1.88
Rate
297.00
Amount
558.36
4570.79
45.71
4616.50
692.48
5308.98
5309.00
139
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
0.47
0.47
0.22
1120.00
106.64
5240.00
526.40
50.12
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
day
0.07
114.40
13.52
1.88
325.00
1.70
1.70
297.00
22.75
194.48
22.98
558.36
4417.49
44.17
4461.66
669.25
5130.91
5130.90
4.2.7
Code
0293
0295
2206
2202
0983
2261
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2.8
Code
0293
0295
2206
2202
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
0.47
106.64
50.12
tonne
0.22
5240.00
1152.80
tonne
0.22
94.80
20.86
day
day
day
day
day
day
0.90
0.78
0.70
0.06
0.06
0.07
297.00
297.00
328.00
393.00
361.00
800.00
267.30
231.66
229.60
23.58
21.66
56.00
day
L.S.
L.S.
day
0.07
114.40
13.52
1.88
325.00
1.70
1.70
297.00
22.75
194.48
22.98
558.36
4196.59
41.97
4238.56
635.78
4874.34
4874.35
140
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
Code
0982
2203
0367
2209
0114
0115
0101
0123
0002
0012
9999
9999
0115
Description
Unit
Quantity
Rate
Amount
cum
cum
tonne
tonne
0.47
0.47
0.13
0.13
1120.00
106.64
5240.00
94.80
526.40
50.12
681.20
12.32
day
day
day
day
day
0.90
0.78
0.70
0.10
0.07
297.00
297.00
328.00
393.00
800.00
267.30
231.66
229.60
39.30
56.00
day
L.S.
L.S.
0.07
114.40
14.30
325.00
1.70
1.70
22.75
194.48
24.31
day
1.88
297.00
558.36
3932.74
39.33
3972.07
595.81
4567.88
4567.90
4.3
Centering and shuttering including strutting, propping etc. and removal of form
work for.
4.3.1
Code
7319
7326
7327
7328
7329
Description
Details of cost for footing size 2.7mx2.7mx
l.00m Contact area = 10.80 sqm.
MATERIAL:
Assuming shuttering material will become
unserviceable after use of 40 times
Adding for maintenance @ 10% of cost Taking
salvage value after full use of material @
25% of cost
Wall form panel 1250x500 mm
Qty taken for cost of using once =
16x0.85/40 = 0.34
Corner angle 45x45x5 mm 1.50 m long
Qty taken for cost of using once =
4x0.85/40 = 0.085
100 mm channel shoulder 2.5 m long
Qty taken for cost of using once =
8x0.85/40= 0.17
Double clip ( bridge clip)
Qty taken for cost of using once =
16x0.85/40 = 0.34
Single clip
Qty taken for cost of using once =
8x0.85/40 = 0.17
141
Unit
Quantity
Rate
Amount
each
0.34
1050.00
357.00
each
0.085
300.00
25.50
each
0.17
1160.00
197.20
each
0.34
97.00
32.98
each
0.17
77.00
13.09
Code
7330
9999
9999
0116
0114
9999
9999
Description
Unit
Quantity
Rate
metre
0.2295
280.00
64.26
L.S.
L.S.
22.10
78.00
1.70
1.70
37.57
132.60
day
day
L.S.
0.75
1.50
52.00
393.00
297.00
1.70
294.75
445.50
88.40
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10.8 sqm
Cost of 1 sqm
Say
4.3.2
Code
7319
7327
7328
7329
7330
9999
9999
Amount
1733.05
17.33
1750.38
262.56
2012.94
186.38
186.40
Retaining walls, return walls, walls (any thickness) including attached pilasters,
buttresses, plinth and string courses fillets, kerbs and steps etc.
Description
Details of cost for 7.9m long and 1.00m high
wall Area of contact 2x7.9x1.0 = 15.8 sqm.
MATERIAL:
Assuming shuttering material will be
unseviceable after use of times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of
material @ 25% of cost
Wall form panel 1250x500 mm
2x3x2x2 = 24 Nos.
Qty taken for cost of using once =
24x0.85/40 = 0.51
100 mm channel shoulder 2.5 m long
4x2 = 8
Qty taken for cost of using once =
8x0.85/40 = 0.17
Double clip ( bridge clip)
2x6x2 = 24
Qty taken for cost of using once =
24x0.85/40 = 0.51
Single clip
2x3x2 = 12
Qty taken for cost of using once =
12x0.85/40 = 0.255
M.S. tube 40 mm dia
2x2x8m = 32m
Qty taken for cost of using once =
32x0.85/40 = 0.68
Nuts & bolts
Carriage
142
Unit
Quantity
Rate
Amount
each
0.51
1050.00
535.50
each
0.17
1160.00
197.20
each
0.51
97.00
49.47
each
0.255
77.00
19.64
metre
0.68
280.00
190.40
L.S.
L.S.
27.62
78.00
1.70
1.70
46.95
132.60
Code
0116
0114
9999
9999
Description
Unit
Quantity
LABOUR:
Fitter (grade 1)
Beldar
Shuttering oil
Sundries
day
day
L.S.
L.S.
3.50
6.00
78.00
52.00
Rate
393.00
297.00
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.8 sqm
Cost of 1 sqm
Say
4.3.3
Code
7331
7332
7333
7334
9999
9999
0116
0114
9999
9999
Amount
1375.50
1782.00
132.60
88.40
4550.26
45.50
4595.76
689.36
5285.12
334.50
334.50
143
Unit
Quantity
Rate
Amount
each
0.17
1040.00
176.80
each
0.085
340.00
28.90
each
0.1063
1220.00
129.69
each
0.085
830.00
70.55
L.S.
L.S.
27.62
52.00
1.70
1.70
46.95
88.40
day
day
L.S.
L.S.
1.00
2.00
39.00
26.00
393.00
297.00
1.70
1.70
393.00
594.00
66.30
44.20
1638.79
16.39
1655.18
248.28
1903.46
422.99
423.00
4.4
Providing and laying cement concrete in kerbs, steps and the like at or near ground
level excluding the cost of centering, shuttering and finishing.
4.4.1
Code
4.1.3
4.4.2
Code
4.1.5
Description
Unit
cum
Quantity
6.00
Rate
4921.70
Amount
29530.20 A
29530.20
29530.20
4921.70
4921.70
Unit
cum
Quantity
6.00
Rate
4408.55
Amount
26451.30 A
26451.30
26451.30
4408.55
4408.55
4.5
Providing and fixing up to floor five level precast cement concrete string or lacing
courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers,
steps, stair cases, etc. including hoisting and setting in position with cement mortar
1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete.
4.5.1
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
Code
4.1.2
0115
Description
Unit
144
Quantity
Rate
Amount
cum
0.45
5317.75
2392.99 A
day
0.51
297.00
151.47
Code
10.1
11.1.2
11.7
9999
4.5.2
Code
4.1.3
Description
Unit
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70 m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.
Assuming shuttering will become unserviceable
after use of 40 times and taking 75% credit.
Qty taken for cost of using once = 0.112x
0.75/40 = 0.0021 qtl = 0.21 kg
Rate as per Item Number 10.1 of
SH: Steel work
(2) Moulding Platform
Assuming platform will become unserviceable
after use of 40 times,
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once =
4/40 = 0.1 sqm
Rate as per Item Number 11.1.2 of
SH: Flooring
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10cum
Qty taken for cost of using once =
0.100/40 = 0.0025 cum
Rate as per Item Number 11.7 of SH: Flooring
Mortar and labour for hoisting and finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,694.72 - 2,481.54 =) 213.18
TOTAL
Add CPOH @ 15% except on A i.e on
(2,696.85 - 2,481.54 =) 215.31
Cost of 0.45 cum
Cost of 1 cum
Say
Quantity
Rate
Amount
kg
0.21
66.85
14.04 A
sqm
0.10
615.40
61.54 A
cum
L.S.
0.0025
36.30
5188.60
1.70
12.97 A
61.71
2694.72
2.13
2696.85
32.30
2729.15
6064.78
6064.80
Unit
145
cum
Quantity
0.45
Rate
4921.70
Amount
2214.76 A
Code
0115
10.1
11.1.2
11.7
9999
4.5.3
Code
4.1.5
0115
Description
Unit
Quantity
Rate
Amount
day
kg
0.51
0.21
297.00
66.85
151.47
14.04 A
sqm
0.10
615.40
61.54 A
cum
0.0025
5188.60
12.97 A
L.S.
36.30
1.70
61.71
2516.49
2.13
2518.62
32.30
2550.92
5668.71
5668.70
Unit
146
Quantity
Rate
Amount
cum
0.45
4408.55
1983.85 A
day
0.51
297.00
151.47
Code
10.1
11.1.2
11.7
9999
Description
Unit
Quantity
Rate
Amount
kg
0.21
66.85
14.04 A
sqm
0.10
615.40
61.54 A
cum
0.0025
5188.60
12.97 A
L.S.
36.30
1.70
61.71
2.13
2287.71
32.30
2320.01
5155.58
5155.60
4.6
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings
etc. as per approved pattern and setting in position with cement mortar
1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering
complete.
4.6.1
Code
4.1.3
Description
Unit
147
cum
Quantity
0.60
Rate
4805.00
Amount
2953.02 A
Code
10.1
11.1.2
11.7
9999
Description
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm
Handle 2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become unserviceable
after use of 40 times and taking 75% credit.
Qty taken for cost of using once =
0.068x0.75/40 = 0.001275 qtl = 0.1275 kg
Rate as per Item Number 10.1 of
SH: Steel work
(2) Moulding Platform
Assuming platform will become unserviceable
after use of 40 times.
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 =
0.1 sqm
Rate as per Item Number 11.1.2 of
SH: Flooring
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40 =
0.0025 cum
Rate as per Item Number 11.7 of
SH: Flooring
Mortar and labour for finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(3,087.97 - 3,036.05 =) 51.92
TOTAL
Add CPOH @ 15% except on A i.e on
(3,088.49 - 3,036.05 =) 52.44
Cost of 0.6 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
kg
0.1275
66.85
8.52 A
sqm
0.10
615.40
61.54 A
cum
0.0025
5188.60
12.97 A
L.S.
30.54
1.70
51.92
3087.97
0.52
3088.49
7.87
3096.36
5160.60
5160.60
4.7
Providing and fixing up to floor five level precast cement concrete solid block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering complete.
4.7.1
Code
4.1.3
Description
Unit
148
cum
Quantity
0.60
Rate
4921.70
Amount
2953.02 A
Code
10.1
11.1.2
11.7
3.8
0115
0123
0114
Description
Centering and shuttering
(1) Mould
(i) Plate 3mm thick 0.28 sqm. @ 23.55kg/m2 =
6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become unserviceable
after use of 40 times and taking 75% credit.
Qty taken for cost of using once =
0.068x0.75/40 = 0.001275 qtl = 0.1275 kg
Rate as per Item Number 10.1 of
SH: Steel work
(2) Moulding Platform
Assuming platform will become
unserviceable after use of 40 times,
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 =
0.1 sqm
Rate as per Item Number 11.1.2 of
SH: Flooring
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40 =
0.0025 cum
Rate as per Item Number 11.7 of
SH: Flooring
Mortar 1:3 for Fixing
0.202/100x25=0.051
Rate as per Item Number 3.8 of SH: Mortars
Extra for Labour for lifting
27/100x25=0.675 or 0.68
Coolie
Labour for hoisting and setting in position
Mason (brick layer) 1 st class
Beldar
Finishing
25x2(0.4x0.3) =6.0 sqm.
TOTAL
Add Water Charges @ 1% except on A i.e on
(4,764.74 - 3,036.05 =) 1,728.69
TOTAL
Add CPOH @ 15% except on A i.e on
(4,782.03 - 3,036.05 =) 1,745.98
Cost of 0.6 cum
Cost of 1 cum
Say
149
Unit
Quantity
Rate
Amount
kg
0.1275
66.85
8.52 A
sqm
0.10
615.40
61.54 A
cum
0.0025
5188.60
12.97 A
cum
0.051
4347.70
221.73
day
0.68
297.00
201.96
day
day
0.60
3.60
393.00
297.00
235.80
1069.20
4764.74
17.29
4782.03
261.90
5043.93
8406.55
8406.55
4.7.2
Code
4.1.5
3.8
10.1
11.1.2
11.7
0115
0123
0114
Unit
150
Quantity
Rate
Amount
cum
0.60
4408.55
2645.13 A
cum
0.051
4347.70
221.73
kg
0.1275
66.85
8.52 A
sqm
0.10
615.40
61.54 A
cum
0.0025
5188.60
12.97 A
day
0.68
297.00
201.96
day
day
0.60
3.60
393.00
297.00
235.80
1069.20
4456.85
17.29
4474.14
261.90
4736.04
7893.40
7893.40
4.8
Providing and fixing up to floor five level precast cement concrete hollow block,
including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering complete.
4.8.1
Code
4.1.3
9999
0115
0123
0114
3.7
4.8.2
Code
4.1.5
9999
0115
Description
Unit
Quantity
Rate
Amount
cum
0.023
4921.70
113.20 A
L.S.
26.91
1.70
45.75
day
0.056
297.00
16.63
day
day
0.05
0.30
393.00
297.00
19.65
89.10
cum
0.002
5107.40
10.21
1.81
27.47
323.82
6476.40
6476.40
Unit
cum
0.023
4408.55
101.40 A
L.S.
26.91
1.70
45.75
day
0.056
297.00
16.63
151
Quantity
Rate
Amount
Code
0122
0114
3.7
4.9
Code
5.1.3
5.9.1
10.1
2.8.1
4.1.5
5.23
Description
Unit
Quantity
Rate
Amount
day
day
0.05
0.30
393.00
297.00
19.65
89.10
cum
0.002
5107.40
10.21
282.74
1.81
284.55
27.47
312.02
6240.40
6240.40
Precasting and placing in position 125 mm dia Bollards 600 mm high of required
shape, including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard
and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6 mm M.S. plate welded
at bottom and embedded 150 mm in cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size), including necessary
excavation of size 250x250x450 mm deep for the same in bitumen/concrete pavement
at specified spacing.
Description
Unit
152
Quantity
Rate
Amount
cum
0.007
5156.20
36.09 A
sqm
0.24
186.40
44.74 A
kg
3.68
66.85
246.01 A
cum
0.03
148.25
4.45 A
cum
0.03
4408.55
132.26 A
sqm
0.25
120.35
30.09 A
Code
9999
Description
Unit
L.S.
Quantity
13.00
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(515.74 - 493.64 =) 22.10
TOTAL
Add CPOH @ 15% except on A i.e on
(515.96 - 493.64 =) 22.32
Cost of each
Say
4.10
Code
4.1.3
0295
0296
0123
0124
9999
4.11
Code
4.1.3
Amount
22.10
515.74
0.22
515.96
3.35
519.31
519.30
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Description
Unit
Quantity
Rate
Amount
cum
0.40
4921.70
1968.68 A
cum
-0.67
1200.00
-804.00
cum
0.67
1050.00
703.50
day
day
L.S.
0.40
0.40
1.95
393.00
361.00
1.70
157.20
144.40
3.32
2173.10
2.04
2175.14
30.97
2206.11
220.61
220.60
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Description
Unit
cum
153
Quantity
0.50
Rate
4921.70
Amount
2460.85 A
Code
0123
0124
9999
Description
Unit
day
day
L.S.
Quantity
0.40
0.40
13.52
Rate
393.00
361.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,785.43 - 2,460.85 =) 324.58
TOTAL
Add CPOH @ 15% except on A i.e on
(2,788.68 - 2,460.85 =) 327.83
Cost of 10 sqm
Cost of 1 sqm
Say
4.12
Code
1213
9999
4.13
Code
0309
0771
0370
2211
0114
0115
Amount
157.20
144.40
22.98
2785.43
3.25
2788.68
49.17
2837.85
283.79
283.80
Extra for providing and mixing water proofing material in cement concrete work in
doses by weight of cement as per manufacturer's specification.
Description
Unit
kilogram
L.S.
Quantity
1.00
3.64
Rate
32.00
1.70
Amount
32.00
6.19
38.19
0.38
38.57
5.79
44.36
44.35
Unit
154
Quantity
Rate
Amount
tonne
0.017
40000.00
680.00
litre
1.23
45.00
55.35
quintal
tonne
0.035
0.017
400.00
106.64
14.00
1.81
day
0.12
297.00
35.64
day
0.07
297.00
20.79
Code
0131
9999
4.14
Code
0115
4.15
Description
Unit
Painter
Sundries (Carriage of Kerosene, steam coal,
brushes, T&P etc.)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
L.S.
Quantity
0.20
33.15
Rate
361.00
1.70
Amount
72.20
56.36
936.15
9.36
945.51
141.83
1087.34
108.73
108.75
Extra for concrete work in superstructure above floor V level for each four floors or
part thereof.
Description
Unit
day
Quantity
1.50
Rate
297.00
Amount
445.50
445.50
4.46
449.96
67.49
517.45
517.45
Extra for laying concrete in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush etc. complete.
Note for item No. 4.15 :- The quantity will be calculated by multiplying the depth
measured from the subsoil water level upto centre of gravity of concrete under subsoil water level with quantity of concrete in cum executed under the sub-soil water.
The depth of centre of gravity shall be reconed corrrect to 0.10 m. 0.05 m or more
shall be taken as 0.10 m and less than 0.05 m ignored.
Code
0011
0114
Description
Unit
155
Quantity
Rate
Amount
day
0.375
550.00
206.25
day
4.00
297.00
1188.00
1394.25
13.94
1408.19
211.23
1619.42
385.58
385.60
4.16
Code
0123
0124
0114
0115
Unit
day
day
day
day
Quantity
0.02
0.02
0.25
0.15
Rate
393.00
361.00
297.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
4.17
Code
0287
2260
0983
2261
0114
0115
0295
0297
2202
0982
2203
0367
2209
0114
0123
Amount
7.86
7.22
74.25
44.55
133.88
1.34
135.22
20.28
155.50
155.50
Unit
156
Quantity
Rate
Amount
cum
0.75
510.00
382.50
cum
cum
cum
0.75
0.06
0.06
115.92
650.00
106.64
86.94
39.00
6.40
day
day
0.16
0.11
297.00
297.00
47.52
32.67
cum
0.35
1200.00
420.00
cum
0.12
1050.00
126.00
cum
0.47
106.64
50.12
cum
cum
tonne
tonne
0.23
0.23
0.11
0.11
1120.00
106.64
5240.00
94.80
257.60
24.53
576.40
10.43
day
day
1.00
0.05
297.00
393.00
297.00
19.65
Code
0101
9999
9999
0155
0114
0115
4.18
Code
8732
4.19
Description
Unit
Quantity
Rate
Amount
Bhisti
Hire and running charges of mechanical mixer
Sundries
LABOUR:
Mason (average)
Beldar
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
L.S.
L.S.
0.33
13.39
6.76
328.00
1.70
1.70
108.24
22.76
11.49
day
day
day
0.27
1.08
1.08
377.00
297.00
297.00
101.79
320.76
320.76
3262.56
32.63
3295.19
494.28
3789.47
378.95
378.95
Extra for addition of synthetic polyester triangular fibre of length 12 mm, effective
diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/
Flooring /water retaining structures by using 125 gms of synthetic polyester triangular
fibre for 50 kgs cement used as per directions of Engineer-in-Charge.
Description
Unit
kg
Quantity
0.125
Rate
365.00
Amount
45.62
45.62
0.46
46.08
6.91
52.99
53.00
Providing and laying in position ready mixed plain cement concrete, using fly ash
and cement content as per approved design mix and manufactured in fully automatic
batching plant and transported to site of work in transit mixer for all leads, having
continuous agitated mixer, manufactured as per mix design of specified grade for
plain cement concrete work, including pumping of R.M.C. from transit mixer to site
of laying and curing, excluding the cost of centering, shuttering and finishing,
including cost of curing, admixtures in recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve workability without impairing strength
and durability as per direction of the Engineer - in - charge.
Note :
1) Excess/less cement used than specified in this item is payable/ recoverable
separately.
2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement
of OPC as per IS : 456. Uniform blending with cement is to be ensured in accordance
with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC.
157
4.19.1
4.19.1.1 M-15 grade plain cement concrete (cement content considered@240 kg/cum).
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
Description
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.24
0.24
1.20
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1257.60
22.75
45.60
cum
km/cum
cum
1.00
10.00
1.00
350.00
30.00
150.00
350.00
300.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
4640.91
46.41
4687.32
703.10
5390.42
5390.40
4.19.1.2 M-10 grade plain cement concrete (cement content considered@220 kg/cum).
Code
0293
0295
2206
Description
Unit
158
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
Code
2202
0982
2203
1980
2262
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
4.19.2
Description
Unit
Quantity
Rate
Amount
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.22
0.22
1.10
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1152.80
20.86
41.80
cum
km/cum
cum
1.00
10.00
1.00
350.00
30.00
150.00
350.00
300.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
4530.42
45.30
4575.72
686.36
5262.08
5262.10
4.19.2.1 M-15 grade plain cement concrete. (cement content considered@240 kg /cum).
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318
Description
Unit
159
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.24
0.24
1.20
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1257.60
22.75
45.60
Code
0004
0029
0155
0114
0101
0012
9999
0115
Description
Unit
Quantity
Rate
Amount
cum
km/cum
1.00
10.00
350.00
30.00
350.00
300.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
day
1.88
297.00
558.36
5049.27
50.49
5099.76
764.96
5864.72
5864.70
4.19.2.2 M-10 grade plain cement concrete (cement content considered@220 kg/cum).
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318
0004
0029
0155
0114
0101
0012
9999
Description
Unit
160
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.22
0.22
1.10
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1152.80
20.86
41.80
cum
km/cum
1.00
10.00
350.00
30.00
350.00
300.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
Code
0115
Description
Unit
Coolie
day
Quantity
1.88
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
4.20
Amount
558.36
4938.78
49.39
4988.17
748.23
5736.40
5736.40
Providing and laying in position ready mixed plain cement concrete, with cement
content as per approved design mix and manufactured in fully automatic batching
plant and transported to site of work in transit mixer for all leads, having continuous
agitated mixer, manufactured as per mix design of specified grade for plain cement
concrete work, including pumping of R.M.C. from transit mixer to site of laying
and curing, excluding the cost of centering, shuttering and finishing, including
cost of curing, admixtures in recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete, improve workability without impairing
strength and durability as per direction of the Engineer - in - charge.
Note :1 ) Excess / less cement used than specified in this item is payble / recoverable
separately.
4.20.1
4.20.1.1 M-15 grade plain cement concrete (cement content considered@240 kg/cum).
Code
0293
0295
2206
2202
0982
2203
0367
2209
7318
0004
0029
0009
0155
0114
Description
Unit
161
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
tonne
kilogram
0.47
0.47
0.24
0.24
1.20
1120.00
106.64
5240.00
94.80
38.00
526.40
50.12
1257.60
22.75
45.60
cum
km/cum
cum
1.00
10.00
1.00
350.00
30.00
150.00
350.00
300.00
150.00
day
day
0.17
2.00
377.00
297.00
64.09
594.00
Code
0101
0012
9999
Description
Unit
Bhisti
Vibrator (Needle type 40 mm)
Sundries
day
day
L.S.
Quantity
0.90
0.07
13.00
Rate
328.00
325.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Amount
295.20
22.75
22.10
4739.55
47.40
4786.95
718.04
5504.99
5505.00
4.20.1.2 M-10 grade plain cement concrete (cement content considered@220 kg/cum).
Code
0293
0295
2206
2202
0982
2203
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
Description
Unit
162
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
tonne
kilogram
0.47
0.47
0.22
0.22
1.10
1120.00
106.64
5240.00
94.80
38.00
526.40
50.12
1152.80
20.86
41.80
cum
km/cum
cum
1.00
10.00
1.00
350.00
30.00
150.00
350.00
300.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
4629.06
46.29
4675.35
701.30
5376.65
5376.65
4.20.2
4.20.2.1 M-15 grade plain cement concrete (cement content considered@240 kg /cum).
Code
0293
0295
2206
2202
0982
2203
0367
2209
7318
0004
0029
0155
0114
0101
0012
9999
0115
Description
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
tonne
tonne
kilogram
0.47
0.47
0.24
0.24
1.20
1120.00
106.64
5240.00
94.80
38.00
526.40
50.12
1257.60
22.75
45.60
cum
km/cum
1.00
10.00
350.00
30.00
350.00
300.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
day
1.88
297.00
558.36
5147.91
51.48
5199.39
779.91
5979.30
5979.30
4.20.2.2 M-10 grade plain cement concrete (cement content considered@220 kg/cum).
Code
0293
0295
2206
Description
Unit
163
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
Code
2202
0982
2203
0367
2209
7318
0004
0029
0155
0114
0101
0012
9999
0115
Description
Unit
cum
0.24
106.64
25.59
cum
cum
tonne
tonne
kilogram
0.47
0.47
0.22
0.22
1.10
1120.00
106.64
5240.00
94.80
38.00
526.40
50.12
1152.80
20.86
41.80
cum
km/cum
1.00
10.00
350.00
30.00
350.00
300.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
day
1.88
297.00
558.36
5037.42
50.37
5087.79
763.17
5850.96
5850.95
164
Quantity
Rate
Amount
REINFORCED CEMENT
CONCRETE WORK
165
5.1
5.1.1
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
5.1.2
Code
0295
0297
2202
0982
2203
0367
2209
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.425 cum)
Carriage of cement
LABOUR:
Mason (average)
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.64
1200.00
768.00
cum
0.21
1050.00
220.50
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.61
1120.00
106.64
5240.00
476.00
45.32
3196.40
tonne
0.61
94.80
57.83
day
day
day
day
0.17
2.00
0.90
0.07
377.00
297.00
328.00
800.00
64.09
594.00
295.20
56.00
day
L.S.
0.07
14.3
325.00
1.70
22.75
24.31
5911.04
59.11
5970.15
895.52
6865.67
6865.65
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.2833 cum)
Carriage of cement
167
Unit
Quantity
Rate
Amount
cum
0.57
1200.00
684.00
cum
0.28
1050.00
294.00
cum
0.85
106.64
90.64
cum
cum
tonne
0.425
0.425
0.40
1120.00
106.64
5240.00
476.00
45.32
2096.00
tonne
0.40
94.80
37.92
Code
0155
0114
0101
0002
0012
9999
5.1.3
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Description
LABOUR:
Mason (average)
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
0.17
2.00
0.90
0.07
377.00
297.00
328.00
800.00
64.09
594.00
295.20
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
4780.23
47.80
4828.03
724.20
5552.23
5552.25
168
Unit
Quantity
Rate
Amount
cum
0.67
1200.00
804.00
cum
0.22
1050.00
231.00
cum
0.89
106.64
94.91
cum
cum
tonne
0.445
0.445
0.32
1120.00
106.64
5240.00
498.40
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
0.17
2.00
0.90
0.07
377.00
297.00
328.00
800.00
64.09
594.00
295.20
56.00
day
L.S.
0.07
14.30
325.00
1.70
22.75
24.31
4439.25
44.39
4483.64
672.55
5156.19
5156.20
5.2
5.2.1
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Description
Details of cost for 9.18 cum.
MATERIAL:
Counter fort Retaining wall 4.5m high and 6m
long.
Base- 1x6x1.5x0.2 = 1.80 cum.
Heel - 1x6x0.3x0.2 = 0.36 cum.
1x6x0.3x0.3 = 0.54 cum.
Stem - 1x6x4.3x0.2 (Avg.) = 5.16 cum.
Triangular counterfort - 2x1/2x4.4x1.5x0.2 =
1.32 cum.
Total quantity for details of cost = 9.18 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.425 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
Scaffolding
Extra labour for lifting of material upto floor
V level:
0.75x9.18x2.5
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 9.18 cum
Cost of 1 cum
Say
169
Unit
Quantity
Rate
Amount
cum
5.8752
1200.00
7050.24
cum
1.9278
1050.00
2024.19
cum
7.803
106.64
832.11
cum
cum
tonne
3.9015
3.9015
5.5998
1120.00
106.64
5240.00
4369.68
416.06
29342.95
tonne
5.5998
94.80
530.86
day
day
day
day
day
day
11.29
7.53
8.26
0.92
0.92
0.64
297.00
297.00
328.00
393.00
361.00
800.00
3353.13
2236.41
2709.28
361.56
332.12
512.00
day
L.S.
L.S.
0.64
131.82
420.03
325.00
1.70
1.70
208.00
224.09
714.05
day
17.20
297.00
5108.40
60325.13
603.25
60928.38
9139.26
70067.64
7632.64
7632.65
5.2.2
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
5.2.3
Code
0295
0297
2202
0982
2203
0367
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
Description
Details of cost for 9.18 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.2833 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
Scaffolding
Extra labour for lifting of material upto floor
V level:
0.75x9.18x2.5
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 9.18 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
5.2326
1200.00
6279.12
cum
2.5704
1050.00
2698.92
cum
7.803
106.64
832.11
cum
cum
tonne
3.9015
3.9015
3.672
1120.00
106.64
5240.00
4369.68
416.06
19241.28
tonne
3.672
94.80
348.11
day
day
day
day
day
day
11.29
7.53
8.26
0.92
0.92
0.64
297.00
297.00
328.00
393.00
361.00
800.00
3353.13
2236.41
2709.28
361.56
332.12
512.00
day
L.S.
L.S.
0.64
131.82
420.03
325.00
1.70
1.70
208.00
224.09
714.05
day
17.20
297.00
5108.40
49944.32
499.44
50443.76
7566.56
58010.32
6319.21
6319.20
170
Unit
Quantity
Rate
Amount
cum
6.1506
1200.00
7380.72
cum
2.0196
1050.00
2120.58
cum
8.1702
106.64
871.27
cum
cum
tonne
4.0851
4.0851
2.9376
1120.00
106.64
5240.00
4575.31
435.64
15393.02
Code
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
5.3
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
Description
Unit
Quantity
Rate
Amount
Carriage of cement
LABOUR:
Beldar
Coolie
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
Scaffolding
Extra labour for lifting of material upto floor V
level:
0.75x9.18x2.5
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 9.18 cum
Cost of 1 cum
Say
tonne
2.9376
94.80
278.48
day
day
day
day
day
day
11.29
7.53
8.26
0.92
0.92
0.64
297.00
297.00
328.00
393.00
361.00
800.00
3353.13
2236.41
2709.28
361.56
332.12
512.00
day
L.S.
L.S.
0.64
131.82
420.03
325.00
1.70
1.70
208.00
224.09
714.05
day
17.20
297.00
5108.40
46814.06
468.14
47282.20
7092.33
54374.53
5923.15
5923.15
Reinforced cement concrete work in beams, suspended floors, roofs having slope
up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases up to floor five level excluding the cost of centering,
shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size).
Description
Details of cost for 1 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
(0.2225 cum)
Carriage of cement
LABOUR:
Mason (average)
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
171
Unit
Quantity
Rate
Amount
cum
0.67
1200.00
804.00
cum
0.22
1050.00
231.00
cum
0.89
106.64
94.91
cum
cum
tonne
0.445
0.445
0.32
1120.00
106.64
5240.00
498.40
47.45
1676.80
tonne
0.32
94.80
30.34
day
day
day
day
0.24
2.75
0.90
0.08
377.00
297.00
328.00
800.00
90.48
816.75
295.20
64.00
day
0.08
325.00
26.00
Code
9999
0115
5.4
Code
4.4.1
0114
0101
0123
0124
0128
0115
5.5
Code
0295
Description
Unit
Sundries
Extra labour for lifting material upto floor
V level: Coolie (2.5x0.75)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Quantity
Rate
Amount
L.S.
14.30
1.70
24.31
day
1.88
297.00
558.36
5258.00
52.58
5310.58
796.59
6107.17
6107.15
Providing and laying up to floor five level reinforced cement concrete in kerbs,
steps and the like excluding the cost of centering, shuttering, finishing and
reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size).
Description
Details of cost for 1 cum.
Cement concrete 1:2:4
Rate as per Item Number 4.4.1 of
SH: Concrete work
LABOUR:
Extra labour for laying CC in RCC work
Beldar
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
Extra labour for lifting material upto floor
V level: Coolie (1.5x0.75)
Coolie
TOTAL
Add Water Charges @ 1% except on A i.e on
(5,618.64 - 4,921.70 =) 696.94
TOTAL
Add CPOH @ 15% except on A i.e on
(5,625.61 - 4,921.70 =) 703.91
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
1.00
day
day
day
day
day
0.10
0.20
0.04
0.04
0.04
297.00
328.00
393.00
361.00
328.00
29.70
65.60
15.72
14.44
13.12
day
1.88
297.00
558.36
5618.64
6.97
4921.70 4921.70 A
5625.61
105.59
5731.20
5731.20
Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded
plate and roofs having slope more than 15 up to floor five level excluding the cost
of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size).
Description
Details of cost for 26.73cum for semicircular
arch 6m clear span and 9m long and 30cm
thick. Cement concrete 1:2:4 = 1x0.50x3.1
4x6.30x9.00x0.30 = 26.73cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
172
Unit
Quantity
cum
17.9091
Rate
1200.00
Amount
21490.92
Code
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
0123
0124
0101
0115
0115
5.6
Code
5.2.3
0115
Description
Unit
Quantity
Rate
Amount
cum
5.8806
1050.00
6174.63
cum
23.7897
106.64
2536.93
cum
cum
tonne
11.8948
11.8948
8.5536
1120.00
106.64
5240.00
13322.18
1268.46
44820.86
tonne
8.5536
94.80
810.88
day
day
day
day
6.42
73.51
24.06
2.14
377.00
297.00
328.00
800.00
2420.34
21832.47
7891.68
1712.00
day
L.S.
2.14
401.89
325.00
1.70
695.50
683.21
day
day
day
day
5.00
5.00
1.50
4.50
393.00
361.00
328.00
297.00
1965.00
1805.00
492.00
1336.50
day
50.12
297.00
14885.64
146144.20
1461.44
147605.64
22140.85
169746.49
6350.41
6350.40
Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding
the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Description
Details of cost for 1 cum.
MATERIAL:
RCC 1:2:4 in chimneys & shafts
Rate as per Item Number 5.2.3 of
SH: Reinforced cement concrete work
Extra labour involved for lifting materials
Coolie
TOTAL
Add Water Charges @ 1% except on A i.e on
(6,000.37 - 5,923.15 =) 77.22
TOTAL
Add CPOH @ 15% except on A i.e on
(6,001.14 - 5,923.15 =) 77.99
Cost of 1 cum
Say
173
Unit
Quantity
cum
1.00
day
0.26
Rate
Amount
5923.15 5923.15 A
297.00
77.22
6000.37
0.77
6001.14
11.70
6012.84
6012.85
5.7
Code
4.1.3
0115
Unit
Quantity
cum
1.00
day
0.08
Rate
4921.70 4921.70 A
297.00
TOTAL
Add Water Charges @ 1% except on A i.e on
(4,945.46 - 4,921.70 =) 23.76
TOTAL
Add CPOH @ 15% except on A i.e on
(4,945.70 - 4,921.70 =) 24.00
Cost of 1 cum
Say
5.8
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
9999
Amount
23.76
4945.46
0.24
4945.70
3.60
4949.30
4949.30
174
Unit
Quantity
Rate
Amount
cum
0.3762
1200.00
451.44
cum
0.1848
1050.00
194.04
cum
0.561
106.64
59.83
cum
cum
tonne
0.2805
0.2805
0.264
1120.00
106.64
5240.00
314.16
29.91
1383.36
tonne
0.264
94.80
25.03
day
day
day
day
day
L.S.
0.79
0.56
0.60
0.06
0.06
30.16
297.00
297.00
328.00
393.00
361.00
1.70
234.63
166.32
196.80
23.58
21.66
51.27
Code
9999
0002
0012
0115
0123
0124
0114
0101
Description
Unit
Quantity
Rate
Amount
Sundries
Hire charges of Concrete Mixer 0.25 to
0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Extra for lifting materials upto floor five level
Coolie
Extra for restricted working in fins
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Beldar
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.66 cum
Cost of 1 cum
Say
L.S.
day
9.49
0.05
1.70
800.00
16.13
40.00
day
0.05
325.00
16.25
day
0.18
297.00
53.46
day
day
day
day
0.05
0.05
0.10
0.15
393.00
361.00
297.00
328.00
19.65
18.05
29.70
49.20
3394.47
33.94
3428.41
514.26
3942.67
5973.74
5973.75
5.9
Centering and shuttering including strutting, propping etc. and removal of form for.
5.9.1
Code
7319
7326
7327
7328
7329
7330
9999
9999
0116
Description
Unit
175
Quantity
Rate
Amount
each
0.34
1050.00
357.00
each
0.085
300.00
25.50
each
0.17
1160.00
197.20
each
0.34
97.00
32.98
each
0.17
77.00
13.09
metre
0.2295
280.00
64.26
L.S.
22.10
1.70
37.57
L.S.
78.00
1.70
132.60
day
0.75
393.00
294.75
Code
0114
9999
9999
Description
Unit
Quantity
Beldar
Shuttering oil
Sundries
day
L.S.
L.S.
1.50
52.00
26.00
Rate
297.00
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10.8 sqm
Cost of 1 sqm
Say
5.9.2
Code
7319
7327
7328
7329
7330
9999
9999
0116
0114
Amount
445.50
88.40
44.20
1733.05
17.33
1750.38
262.56
2012.94
186.38
186.40
Walls (any thickness) including attached pilasters, butteresses, plinth and string
courses etc.
Description
Unit
176
Quantity
Rate
Amount
each
0.51
1050.00
535.50
each
0.17
1160.00
197.20
each
0.51
97.00
49.47
each
0.255
77.00
19.64
metre
0.68
280.00
190.40
L.S.
27.62
1.70
46.95
L.S.
78.00
1.70
132.60
day
day
3.50
6.00
393.00
297.00
1375.50
1782.00
Code
9999
9999
Description
Unit
Quantity
Shuttering oil
Sundries
L.S.
L.S.
78.00
52.00
Rate
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.8 sqm
Cost of 1 sqm
Say
5.9.3
Code
10.1
7342
7343
9999
9999
0116
0114
9999
Amount
132.60
88.40
4550.26
45.50
4595.76
689.36
5285.12
334.50
334.50
177
Unit
Quantity
Rate
Amount
kg
9.2055
66.85
615.39 A
each
0.1063
1900.00
201.97
each
0.1275
1200.00
153.00
L.S.
22.10
1.70
37.57
L.S.
130.00
1.70
221.00
day
day
L.S.
3.00
6.00
78.00
393.00
297.00
1.70
1179.00
1782.00
132.60
Code
9999
Description
Unit
Quantity
L.S.
49.70
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(4,407.02 - 615.39 =) 3,791.63
TOTAL
Add CPOH @ 15% except on A i.e on
(4,444.94 - 615.39 =) 3,829.55
Cost of 13.5 sqm
Cost of 1 sqm
Say
5.9.4
Code
10.1
7342
7343
9999
9999
0116
0114
9999
Amount
84.49
4407.02
37.92
4444.94
574.43
5019.37
371.81
371.80
178
Unit
Quantity
Rate
Amount
kg
9.2055
66.85
615.39 A
each
0.1063
1900.00
201.97
each
0.1275
1200.00
153.00
L.S.
22.10
1.70
37.57
L.S.
130.00
1.70
221.00
day
day
L.S.
3.00
6.00
78.00
393.00
297.00
1.70
1179.00
1782.00
132.60
Code
9999
Description
Unit
Quantity
L.S.
49.70
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(4,407.02 - 615.39 =) 3,791.63
TOTAL
Add CPOH @ 15% except on A i.e on
(4,444.94 - 615.39 =) 3,829.55
Cost of 13.5 sqm
Cost of 1 sqm
Say
5.9.5
Code
10.1
7343
7344
9999
Amount
84.49
4407.02
37.92
4444.94
574.43
5019.37
371.81
371.80
Unit
179
Quantity
Rate
Amount
6.4356
66.85
430.22 A
0.1275
1200.00
153.00
0.1063
422.00
44.86
22.10
1.70
37.57
Code
9999
0116
0114
9999
9999
Description
Unit
Quantity
Rate
Carriage
LABOUR:
Fitter (grade 1)
Beldar
Shuttering oil
Sundries, paper tape etc
L.S.
78.00
1.70
132.60
day
day
L.S.
L.S.
1.25
2.50
39.00
24.61
393.00
297.00
1.70
1.70
491.25
742.50
66.30
41.84
2140.14
17.10
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,140.14 - 430.22 =) 1,709.92
TOTAL
Add CPOH @ 15% except on A i.e on
(2,157.24 - 430.22 =) 1,727.02
Cost of 7.80 sqm
Cost of 1 sqm
Say
5.9.6
Code
7331
7332
7333
7334
9999
9999
0116
0114
9999
Amount
2157.24
259.05
2416.29
309.78
309.80
Unit
180
Quantity
Rate
Amount
each
0.17
1040.00
176.80
each
0.085
340.00
28.90
each
0.1063
1220.00
129.69
each
0.085
830.00
70.55
L.S.
27.62
1.70
46.95
L.S.
52.00
1.70
88.40
day
day
L.S.
1.00
2.00
39.00
393.00
297.00
1.70
393.00
594.00
66.30
Code
9999
Description
Carriage
Unit
Quantity
L.S.
26.00
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 4.50 sqm
Cost of 1 sqm
Say
5.9.7
Code
1198
1197
0302
2204
0112
0114
Amount
44.20
1638.79
16.39
1655.18
248.28
1903.46
422.99
423.00
Unit
181
Quantity
Rate
Amount
10 cudm
28.875
260.00
750.75
10 cudm
4.875
260.00
126.75
metre
0.80
42.00
33.60
cum
0.04363
121.88
5.32
day
day
1.75
1.00
361.00
297.00
631.75
297.00
Code
9999
Description
Sundries
Unit
Quantity
Rate
L.S.
16.12
Unit
Quantity
sqm
1.40
309.80
sqm
3.22
334.50 1077.09 A
sqm
1.66
375.65
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5.79 sqm
Cost of 1 sqm
Say
5.9.8
Code
5.9.5
5.9.2
5.9.7
5.9.9
Code
1197
0302
Amount
27.40
1872.57
18.73
1891.30
283.70
2175.00
375.65
375.65
Rate
Amount
433.72 A
623.58 A
2134.39
2134.39
339.87
339.85
Unit
182
10 cudm
metre
Quantity
256.25
12.60
Rate
260.00
42.00
Amount
6662.50
529.20
Code
0992
2204
2302
0112
0114
9999
5.9.10
Code
Description
Unit
Quantity
Rate
Amount
quintal
0.145
5200.00
754.00
cum
0.4112
121.88
50.12
tonne
0.0145
94. 80
1.37
day
day
L.S.
16.00
13.00
11.70
361.00
297.00
1.70
5776.00
3861.00
19.89
17654.08
176.54
17830.62
2674.59
20505.21
1006.64
1006.65
Unit
183
Quantity
Rate
Amount
Code
1197
2204
1225
1034
2302
0112
0114
9999
5.9.9
Description
Unit
184
Quantity
Rate
Amount
887.90
0.8879
260.00
121.88
23085.40
108.22
0.0878
4450.00
390.71
0.08
0.0168
5600.00
94.80
448.00
1.59
28.00
24.00
134.55
361.00
297.00
1.70
10108.00
7128.00
228.74
-33.31
1006.65 -33531.51A
7967.15
414.99
8382.14
6287.05
14669.19
440.38
440.40
5.9.11
Code
7319
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
Unit
5.9.12
Well steining.
Code
Description
Details of cost for 26.39 sqm.
Surface area
Outside area =22/7x4.40x1.00 - 13.82sqm =
26.39 sqm
MATERIAL:
Assuming that the timber will become
unserviceable after being used 8 times Planks
38 mm (Second class kail wood)
185
Quantity
Rate
Amount
each
0.51
1050.00
535.50
each
0.17
1160.00
197.20
each
0.51
97.00 4
9.47
each
0.255
77.00
19.64
metre
0.68
280.00
190.40
L.S.
27.63
1.70
46.97
L.S.
78.00
1.70
132.60
day
day
L.S.
L.S.
3.50
6.00
78.00
52.00
393.00
297.00
1.70
1.70
1375.50
1782.00
132.60
88.40
4550.28
45.50
4595.78
689.37
5285.15
334.50
334.50
Unit
Quantity
Rate
Amount
Code
1198
1197
0302
5.9.13
Code
1198
1197
Description
Unit
26.39x0.038= 1.00cum.
Wastage 20% = 0.20cum.
Total = 1.20cum. or 1200 cudm.
Qty for cost using once = 1200/8=150 cudm
Second class kail wood in planks
10 cudm
2nd class kail wood battens
Inside = 2x25x0.50x0.075x0.038 = 0.0712cum.
Outside = 2x28x0.50x0.075x0.038 =
0.0798cum
Total = 0.1510cum.
Wastage 5% = 0.0076 cum = 0.1586cum. or
158.60 cudm
Qty for cost using once = 0.1586/8= 0.0198
cudm
Second class kail wood in scantling
10 cudm
Safeda ballies 125 mm diameter
metre
Inside: 25x1.00 = 25.00m
Outside: 28x1.00 = 28.00m
Total = 53.00m
Qty for cost using once = 53/8 =6.625 m
Add for carriage, labour for erection and
dismantling etc. @ 1/6th of the cost of material
( P + Q + R ) / 6 = ( 3900.00 + 0.51 +
278.25 ) / 6
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 26.39 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
150.00
260.00 3900.00 P
0.0198
6.625
260.00
42.00
0.51 Q
278.25 R
696.46
4875.22
48.75
4923.97
738.60
5662.57
214.57
214.55
Vertical and horizontal fins individually or forming box louvers band, facias and
eaves boards.
Description
Unit
186
Quantity
Rate
Amount
10 cudm
119.25
260.00
3100.50
10 cudm
33.625
260.00
874.25
Code
0302
2204
0112
0114
9999
5.9.14
Code
Description
Unit
Quantity
Rate
metre
12.60
42.00
529.20
cum
0.3076
121.88
37.49
day
day
L.S.
11.00
11.00
80.73
361.00
297.00
1.70
3971.00
3267.00
137.24
11916.68
119.17
12035.85
1805.38
13841.23
551.44
551.45
Extra for shuttering in circular work (20% of respective centering and shuttering items).
Description
Unit
Quantity
Rate
5.9.15
Code
Amount
Amount
20.00
20.00
20.00
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window
sills, string courses, bands, copings, bed plates, anchor blocks and the like.
Description
Unit
187
Quantity
Rate
Amount
Code
7319
7326
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
5.9.16
Description
Unit
Quantity
Rate
Amount
each
0.34
1050.00
357.00
each
0.085
300.00
25.50
each
0.17
1160.00
197.20
each
0.34
97.00
32.98
each
0.17
77.00
13.09
metre
0.2295
280.00
64.26
L.S.
22.10
1.70
37.57
L.S.
78.00
1.70
132.60
day
day
L.S.
L.S.
0.75
1.50
52.00
26.00
393.00
297.00
1.70
1.70
294.75
445.50
88.40
44.20
1733.05
17.33
1750.38
262.56
2012.94
186.38
186.40
1198
Description
Unit
188
10 cudm
Quantity
7.125
Rate
260.00
Amount
185.25
Code
1197
2204
0112
0114
9999
Description
Unit
Quantity
Rate
Amount
19.375
260.00
503.75
0.0265
121.88
3.23
0.81
0.54
5.20
361.00
297.00
1.70
292.41
160.38
8.84
1153.86
11.54
1165.40
174.81
1340.21
111.68
111.70
1198
1197
Description
Unit
189
Quantity
Rate
Amount
10 cudm
20.00
260.00
520.00
10 cudm
21.88
260.00
568.88
Code
2204
0112
0114
9999
5.9.17
Code
1198
1197
2447
Description
Qty taken for cost of using once = 175/8
= 21.88
cudm
Carriage of timber
Planks = 0.16 cum.
Battens = 0.175 cum.
Total = 0.335 cum.
Qty taken for cost of using once = 0.335/8 =
0.0419 cum
LABOUR:
For assembling erection dismantling &
cleaning
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 4.00 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.0419
121.88
5.11
day
day
L.S.
1.00
0.75
6.50
361.00
297.00
1.70
361.00
222.75
11.05
1688.79
16.89
1705.68
255.85
1961.53
490.38
490.40
Unit
Quantity
190
Rate
Amount
22.75
260.00
591.50
27.25
260.00
708.50
3.15
35.00
110.25
Code
2204
0112
0114
9999
5.9.18
Code
1198
Description
Wastage @ 5% = 1.20 m
Total = 25.20 m
Qty taken for cost using once = 25.2/8 =
3.15m
Carriage of timber
Planking = 0.188 cum.
Battens & Wales = 0.218 cum.
Bailies 25.2x22/7x(0.125)2/4 = 0.310 cum.
Total = 0.710 cum.
Qty taken for cost using once
Total = 0.710 cum.
Qty taken for cost using once = 0.71/8= 0.0888
cum
LABOUR:
Labour for assembling, erection, dismantling
& cleaning
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 4.00 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.0888
121.88
10.82
day
day
L.S.
0.63
0.63
6.50
361.00
297.00
1.70
227.43
187.11
11.05
1846.66
18.47
1865.13
279.77
2144.90
536.23
536.20
Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases
to pilasters and columns and the like.
Description
Unit
191
Quantity
13.375
Rate
260.00
Amount
347.75
Code
1197
2447
2204
0112
0114
9999
5.9.19
Code
Description
Unit
Quantity
10 cudm
Rate
Amount
3.15
260.00
81.90
metre
0.6763
35.00
23.67
cum
0.0248
121.88
3.02
day
day
L.S.
0.80
0.80
7.15
361.00
297.00
1.70
288.80
237.60
12.16
994.90
9.95
1004.85
150.73
1155.58
457.66
457.65
Unit
192
Quantity
Rate
Amount
Code
1198
1197
2447
2204
0112
0114
9999
Description
Unit
1x0.05x1.80 = 0.094
2x0.45x0.06 = 0.027
Total = 0.954 sqm
MATERIAL
Assuming that the timber will become
unserviceable after being used 8 times
Second class kail wood in planks
10 cudm
(i) Planking 38mm thick.
Bottom 1x1.876x0.488 = 0.915 sqm.
1x1.876x0.05 =0.94 sqm.
2x0.45x0.06 = 0.027 sqm.
Total =1.036 sqm.
Add 5% wastage = 0.052 sqm.
Total = 1. 088 sqm.
Cubic contents 1.088x0.038 =0.041 cum =
41 cudm
Qty taken for cost using once = 41/8 =
5.125 cudm
Second class kail wood in scantling
10 cudm
(ii) Battens2x0.60x0.075x0.10 = 0.009
Ends with bearing center
1x0.45x0.075x0.10 = 0.003
Total = 0.012 cum = 12 cudm
Qty taken for cost using once =12/8=1.50 cudm
Hollock ballies 125 mm diameter
metre
(iii) Bailies 125mm dia.
2x2.1 =4.2m
Wastage 5% = 0.21m
Total = 4.41 m
Qty taken for cost using once = 4.41/8 =
0.5513 m
Carriage of timber
cum
Plank = 0.041 cum.
Battens = 0.012 cum.
Bailies 4.41x22/7x(0.125)2/4 = 0.054 cum.
Total = 0.107 cum
Qty taken for cost using once = 0.107/8 =
0.01338 cum
LABOUR:
Labour for assembling, erection, dismantling &
cleaning
Carpenter 2nd class
day
Beldar
day
Sundries
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.954 sqm
Cost of 1 sqm
Say
193
Quantity
Rate
Amount
5.125
260.00
133.25
1.50
260.00
39.00
0.5513
35.00
19.30
0.01338
121.88
1.63
0.30
0.25
5.20
361.00
297.00
1.70
108.30
74.25
8.84
384.57
3.85
388.42
58.26
446.68
468.22
468.20
5.9.20
Code
10.1
1215
8659
0112
0114
1034
7342
7343
9999
9999
0116
0114
9999
9999
Suspended floors, roofs, landings, balconies and access platform with water proof
ply 12 mm thick.
Description
Details of cost for a room 4.50x3 =
13.50 sqm, height 3.50 m.
MATERIAL:
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
Rate as per Item Number 10.1 of SH:
Steel work
1. Plates (size 0.75x0.60)
Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60= 1.20 m
= 2.70m@3.00kg/m = 8.10 kg
Weight of one plate =8.1kg
Add for wastage @ 5% = 0.41 kg
Total = 8.51 kg
Total weight of all plates = 5x6x8.51 = 255.30 kg
Qty taken for cost using once.= 255.30x0.85/40 =
5.425 kg
Welding length = (30x32)/40=24 cm
Welding by electric plant
Water proof ply 12 mm thick
1x4.50x3.00=13.50sqm Add wastage
5% =0.68sqm
Total 14.18sqm
Qty taken for cost using once 14.18/8 =
1.77sqm
Carpenter 2nd class
Beldar
Bolts and nuts up to 300 mm in length
Adjustable span ESO+SI (2.35-3.40)
Qty taken for cost using once = 5x0.85/40 =
0.10625
Adjustable telescopic prop 3 m (2.02-3.75 m)
Qty taken for cost using once = 6x0.85/40 =
0.1275
Assembly nut & bolts etc.
Carriage
LABOUR:
Fitter (grade 1)
Beldar
Shuttering oil
Sundries
TOTAL 5429.80
Add Water Charges @ 1% except on A i.e on
(5,429.80 - 362.66 =) 5,067.14
TOTAL
Add CPOH @ 15% except on A i.e on
(5,480.47 - 362.66 =) 5,117.81
Cost of 13.50 sqm
Cost of 1 sqm
Say
194
Unit
Quantity
Rate
Amount
kg
5.425
66.85
362. 66 A
cm
sqm
24.00
1.77
1.80
650.00
43.20
1150.50
day
day
quintal
each
0.125
0.125
0.0021
0.1063
361.00
297.00
5600.00
1900.00
45.12
37.12
11.76
201.97
each
0.1275
1200.00
153.00
L.S.
L.S.
12.63
130.00
1.70
1.70
21.47
221.00
day
day
L.S.
L.S.
3.00
6.00
78.00
52.00
393.00
297.00
1.70
1.70
1179.00
1782.00
132.60
88.40
50.67
5480.47
767.67
6248.14
462.83
462.85
5.9.21
Code
10.1
1215
8659
0112
0114
1034
7343
7344
9999
9999
0116
0114
9999
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof
ply 12 mm thick.
Description
Unit
195
Quantity
Rate
Amount
3.72
66.85
248.68 A
12.00
1.02
1.80
650.00
21.60
663.00
0.125
0.125
0.0021
0.1275
361.00
297.00
5600.00
1200.00
45.12
37.12
11.76
153.00
0.1063
422.00
44.86
11.05
78.00
1.70
1.70
18.78
132.60
1.25
2.50
39.00
393.00
297.00
1.70
491.25
742.50
66.30
Code
9999
Description
Unit
Quantity
L.S.
26.00
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,720.77 - 248.68 =) 2,472.09
TOTAL
Add CPOH @ 15% except on A i.e on
(2,745.49 - 248.68 =) 2,496.81
Cost of 7.80 sqm
Cost of 1 sqm
Say
Amount
44.20
2720.77
24.72
2745.49
374.52
3120.01
400.00
400.00
5.10
Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete
as per the direction of Engineer-in-Charge.
5.10.1
Code
7320
7324
7325
9999
9999
5.10.2
Code
7321
7324
7325
9999
9999
Description
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
13.00
50.00
16.00
18.00
1.70
1200.00
768.00
864.00
22.10
L.S.
26.00
1.70
44.20
2898.30
28.98
2927.28
439.09
3366.37
140.27
140.25
Unit
Quantity
196
each
each
each
L.S.
L.S.
24.00
48.00
48.00
13.00
26.00
Rate
60.00
16.00
18.00
1.70
1.70
Amount
1440.00
768.00
864.00
22.10
44.20
3138.30
31.38
3169.68
475.45
3645.13
151.88
151.90
5.10.3
Code
7322
7324
7325
9999
9999
5.10.4
Code
7323
7324
7325
9999
9999
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
13.00
75.00
16.00
18.00
1.70
1800.00
768.00
864.00
22.10
L.S.
26.00
1.70
44.20
3498.30
34.98
3533.28
529.99
4063.27
169.30
169.30
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
13.00
90.00
16.00
18.00
1.70
2160.00
768.00
864.00
22.10
L.S.
26.00
1.70
44.20
3858.30
38.58
3896.88
584.53
4481.41
186.73
186.75
5.11
Extra for additional height in centering, shuttering where ever required with
adequate bracing, propping etc. including cost of de-shuttering and decentering at
all levels, over a height of 3.5 m, for every additional height of 1 metre or part
thereof (Plan area to be measured).
5.11.1
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
Code
Description
Unit
197
Quantity
Rate
Amount
Code
7345
7343
7330
7346
9999
0116
0114
9999
5.12
Code
4.5.2
0114
Description
Unit
Quantity
Rate
Amount
Prop 4 m
Qty taken for cost using once = 21 x0.85/
40 = 0.4463
Deduct the rate of 3m prop
Adjustable telescopic prop 3 m (2.02-3.75 m)
Qty taken for cost using once = 21x0.85/
40 = 0.4463
Difference of rate between 4m prop and
3m prop
M.S. tube 40 mm dia
Bracing MS tube 40mm
7x4.8m = 33.60m
3x6.0m= 18.00m
Total = 51.60m
Qty taken for cost using once = 51.6x0.85/
40= 1.0965
Double coupler
(40x40)
Qty taken for cost using once = 21 x0.85/
40 =0.4463
Carriage
LABOUR:
Fitter (grade 1)
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 28.8 sqm
Cost of 1 sqm
Say
each
0.4463
1170.00
522.17
each
-0.4463
1200.00
-535.56
metre
1.0965
280.00
307.02
each
0.4463
55.00
24.55
L.S.
65.00
1.70
110.50
day
day
L.S.
3.00
6.00
130.00
393.00
297.00
1.70
1179.00
1782.00
221.00
3610.68
36.11
3646.79
547.02
4193.81
145.62
145.60
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete work in string courses, bands, copings, bed plates, anchor blocks, plain
window sills and the like, including the cost of required centering, shuttering but
excluding cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size).
Description
Details of cost for 1 cum.
MATERIAL:
Cement concrete 1:2:4 in string or lacing
course etc
Rate as per Item Number 4.5.2 of SH:
Concrete work
(NB : Rate has been taken including cost of
fixing in CM 1:2 as precast members are to
be fixed in CM 1:2)(1 cement: 2 coarse sand)
as per CPWD specifications
LABOUR:
Extra labour for laying CC in RCC work
Beldar
198
Unit
Quantity
cum
1.00
day
0.10
Rate
Amount
5668. 70 5668.70 A
297.00
29.70
Code
0101
0123
0124
0128
Description
Unit
Quantity
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
day
day
day
day
0.20
0.04
0.04
0.04
Rate
328.00
393.00
361.00
328.00
TOTAL
Add Water Charges @ 1% except on A i.e on
(5,807.28 - 5,668.70 =) 138.58
TOTAL
Add CPOH @ 15% except on A i.e on
(5,808.67 - 5,668.70 =) 139.97
Cost of 1 cum
Say
5.13
Code
4.2.3
4.3.1
0114
0101
0123
0124
0128
Amount
65.60
15.72
14.44
13.12
5807.28
1.39
5808.67
21.00
5829.67
5829.65
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in small lintels not exceeding 1.5 m clear span up to floor five level,
including the cost of required centering, shuttering but excluding the cost of
reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size).
Description
Details of cost for a lintel Qty = 0.054 cum.
MATERIAL:
1.5m clear span = 1.8x0.20x0.15 = 0.054 cum.
Cement Concrete 1:2:4
Rate as per Item Number 4.2.3 of SH
:
Concrete work
Centring and shuttering
Rate as per Item Number 4.3.1 of SH:
Concrete work
LABOUR:
Beldar
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
TOTAL
Add Water Charges @ 1% except on A i.e on
(433.17 - 426.24 =) 6.93
TOTAL
Add CPOH @ 15% except on A i.e on
(433.24 - 426.24 =) 7.00
Cost of 0.054 cum
Cost of 1 cum
Say
199
Unit
Quantity
Rate
Amount
cum
0.054
5822.15
314.40 A
sqm
0.60
186.40
111.84 A
day
day
day
day
day
0 .005
0.01
0.002
0.002
0.002
297.00
328.00
393.00
361.00
328.00
1.48
3.28
0.79
0.72
0.66
433.17
0.07
433.24
1.05
434.29
8042.41
8042.40
5.14
Code
4.1.3
0115
9999
4:3:1
9999
0123
0124
0115
0101
0114
0101
0123
0124
0128
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in mouldings as in cornices, windows sills etc. including setting in cement
mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but
excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size).
Description
Details of cost for one 1 x 0.20 x 0.15 =
0.03 cum.
MATERIAL:
Cement concrete 1:2:4
Rate as per Item Number 4.1.3 of SH:
Concrete work
Extra labour for lifting
0.45 x 0.03 x 2.5 = 0.034
Coolie
Mortar and labour for hoisting and for fixing
Centring and shuttering
Rate as per Item Number 4.3.1 of SH:
Concrete work
53.82x0.03
Add for extra labour for hoisting
LABOUR:
Add Extra labour for moulding
Mason (brick layer) 1 st class
0.58x0.03
Mason (brick layer) 2nd class
0.58x0.03
Coolie
1.5x0.03
Bhisti
0.06x0.03
Extra labour for laying CC in RCC
Beldar
0.1x0.03
Bhisti
0.2x0.03
Mason (brick layer) 1 st class
0.04x0.03
Mason (brick layer) 2nd class
0.04x0.03
Mate
0.04x0.03
TOTAL
Add Water Charges @ 1% except on A i.e on
(263.45 - 214.75 =) 48.70
TOTAL
Add CPOH @ 15% except on A i.e on
(263.94 - 214.75 =) 49.19
Cost of 0.03 cum
Cost of 1 cum
Say
200
Unit
Quantity
Rate
Amount
cum
0.03
492 1.70
147.65 A
day
L.S.
0.034
2.73
297.00
1.70
10.10
4.64
sqm
0.36
186.40
67.10 A
L.S.
1.61
1.70
2.74
day
0.0174
393.00
6.84
day
0.0174
361.00
6.28
day
0.045
297.00
13.36
day
0.0018
328.00
0.59
day
0.003
297.00
0.89
day
0.006
328.00
1.97
day
0.0012
393.00
0.47
day
0.0012
361.00
0.43
day
0.0012
328.00
0.39
263.45
0.49
263.94
7.38
271.32
9044.00
9044.00
5.15
Code
4.1.3
4.3.1
0115
0114
0101
0123
0124
0128
9999
9999
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in lintels, beams and bressumers including setting in cement mortar 1:3
(1 cement : 3 coarse sand), cost of required centering and shuttering but excluding
the cost of reinforcement with, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size).
Description
Details of cost for a beam 6.60m long
0.50m deep and 0.30m wide = 6.60x0.50x
0.30 = 0.99 cum.
MATERIAL:
Cement concrete 1:2:4
Rate as per Item Number 4.1.3 of SH:
Concrete work
Centring and shuttering
Rate as per Item Number 4.3.1 of SH:
Concrete work
Extra labour for lifting material upto floor V
level
Coolie
LABOUR:
Extra labour for laying cement concrete in
RCC work
Beldar
0.10x0.99
Bhisti
0.20x0.99
Mason (brick layer) 1 st class
0.04x0.99
Mason (brick layer) 2nd class
0.04x0.99
Mate
0.04x0.99
Cement mortar 1:3 for fixing
Labour for hoisting, Transporting and setting
in position
TOTAL
Add Water Charges @ 1% except on A i.e on
(7,235.46 - 6,158.64 =) 1,076.82
TOTAL
Add CPOH @ 15% except on A i.e on
(7,246.23 - 6,158.64 =) 1,087.59
Cost of 0.99 cum
Cost of 1 cum
Say
201
Unit
Quantity
Rate
Amount
cum
0.99
4921.70 4872.48 A
sqm
6.90
186.40 1286.16 A
day
1.11
297.00
329.67
day
0.099
297.00
29.40
day
0.198
328.00
64.94
day
0.0396
393.00
15.56
day
0.0396
361.00
14.30
day
0.0396
328.00
12.99
L.S.
L.S.
89.70
269.10
1.70
1.70
152.49
457.47
7235.46
10.77
7246.23
163.14
7409.37
7484.21
7484.20
5.16
Code
4.1.3
13.18
4.3.1
0115
0114
0101
0123
0124
0128
9999
9999
5.17
Code
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering and finishing with neat cement punning
on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Description
Details of cost for one shelf 0.90x0.45x0.04m
thick = 0.90x0.45x0.04m = 0.0162 cum.
Cement concrete 1:2:4
Rate as per Item Number 4.1.3 of SH:
Concrete work
Finisihing
Rate as per Item Number 13.18 of SH:
Finishing
Centring and shuttering:
2x(0.90+0.45)x0.04 = 0.108 sqm
Rate as per Item Number 4.3.1 of SH:
Concrete work
Extra labour for lifting material upto floor
V level
Coolie
LABOUR:
Extra labour for laying cement concrete in
RCC work due to delay etc.
Beldar
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
Cement mortar 1:3 for fixing
Labour for hoisting, Transporting and setting
TOTAL
Add Water Charges @ 1% except on A i.e on
(173.06 - 130.76 =) 42.30
TOTAL
Add CPOH @ 15% except on A i.e on
(173.48 - 130.76 =) 42.72
Cost of 0.0162 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.0162
4921.70
79.73 A
sqm
0.85
36.35
30.90 A
sqm
0.108
186.40
20.13 A
day
0.018
297.00
5.35
day
day
day
day
day
L.S.
L.S.
0.016
0.0032
0.0006
0.0006
0.0006
4.42
13.52
297.00
328.00
393.00
361.00
328.00
1.70
1.70
4.75
1.05
0.24
0.22
0.20
7.51
22.98
173.06
0.42
173.48
6.41
179.89
11104.32
11104.30
Providing, hoisting and fixing up to floor five level precast reinforced cement
concrete in vertical & horizontal fins individually or forming box louvers setting in
cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required
centering, shuttering but excluding the cost of reinforcement, with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Description
Unit
202
Quantity
Rate
Amount
Code
4.1.3
4.3.1
0115
0114
0101
0123
0124
0128
9999
9999
9999
Description
MATERIAL:
Cement concrete l:2:4
Rate as per Item Number 4.1.3 of SH:
Concrete work
Centering and shuttering
Rate as per Item Number 4.3.1 of SH:
Concrete work
Extra labour for lifting material upto floor
V level
Coolie
LABOUR:
Extra labour for laying cement concrete in
RCC work due to delay etc.
Beldar
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
Cement mortar 1:2 for fixing
Labour for hoisting, Transporting and setting
Sundries
TOTAL
Add Water Charges @ 1% except on A i.e on
(4,222.71 - 3,725.50 =) 497.21
TOTAL
Add CPOH @ 15% except on A i.e on
(4,227.68 - 3,725.50 =) 502.18
Cost of 0.66 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.66
sqm
2.56
186.40
477.18 A
day
0.75
297.00
222.75
day
day
day
day
day
L.S.
L.S.
L.S.
0.066
0.132
0.0264
0.0264
0.0264
17.94
71.76
17.94
297.00
328.00
393.00
361.00
328.00
1.70
1.70
1.70
19.60
43.30
10.38
9.53
8.66
30.50
121.99
30.50
4222.71
4.97
4921.70 3248.32 A
4227.68
75.33
4303.01
6519.71
6519.70
5.18
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire
including centering and shuttering, roughening cleaning, fixing and finishing in
cement mortar 1:3 (1 cement : 3 fine sand) etc. complete excluding plastering of
the jambs, sills and soffits.
5.18.1
50 mm thick.
Code
Description
0768
9999
9999
0123
0124
0114
203
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
1.50
6.24
6.20
210.00
1.70
1.70
315.00
10.61
10.54
day
day
day
0.30
0.30
1.08
393.00
361.00
297.00
117.90
108.30
320.76
883.11
8.83
891.94
133.79
1025.73
683.82
683.80
5.18.2
40 mm thick.
Code
Description
0769
9999
9999
0123
0124
0114
Unit
Quantity
Rate
sqm
L.S.
L.S.
0.75
3.64
3.64
180.00
1.70
1.70
135.00
6.19
6.19
day
day
day
0.12
0.12
0.50
393.00
361.00
297.00
47.16
43.32
148.50
386.36
3.86
390.22
58.53
448.75
598.33
598.35
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.75 sqm
Cost of 1 sqm
Say
5.18.3
25 mm thick.
Code
Description
0770
9999
9999
0123
0124
0114
Rate
Code
Amount
sqm
L.S.
L.S.
0.375
1.82
1.82
150.00
1.70
1.70
56.25
3.09
3.09
day
day
day
0.06
0.06
0.25
393.00
361.00
297.00
23.58
21.66
74.25
181.92
1.82
183.74
27.56
211.30
563.47
563.45
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.375 sqm
Cost of 1 sqm
Say
5.19
Amount
Encasing rolled steel sections, in beams and columns, with cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size),
including centering and shuttering complete but excluding cost of reinforcement.
Description
Unit
204
Quantity
Rate
Amount
Code
4.1.3
0114
0101
0123
0124
0128
5.9.5
9999
5.20
Code
4.1.3
0114
0101
0123
0124
0128
5.9.5
Description
Unit
Quantity
cum
0.424
day
day
day
day
day
0.042
0.085
0.017
0.017
0.017
sqm
4.09
L.S.
21.58
Rate
Amount
4921.70 2086.80 A
297.00
328.00
393.00
361.00
328.00
12.47
27.88
6.68
6.14
5.58
309.80 1267.08 A
1.70
36.69
3449.32
0.95
3450.27
14.46
3464.73
8171.53
8171.55
Encasing rolled steel section in grillages with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including centering
and shuttering but excluding cost of expanded metal and hangers.
Description
Details of cost for the grillage 3.50mx3.50mx
1.00m Cement concrete 1:2:4: 3.50mx3.50x
1.00=12.25cum.
Cement concrete 1:2:4
Rate as per Item Number 4.1.3 of SH:
Concrete work
Extra labour for laying C.C. in RCC work
Beldar
Bhisti
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Mate
Shuttering :
2(3.50+3.50)x1.00= 14.00 sqm
Rate as per Item Number 5.9.5 of SH:
Reinforced
cement concrete work
TOTAL
Add Water Charges @ 1% except on A i.e on
(66,325.63 - 64,628.02 =) 1,697.61
TOTAL
Add CPOH @ 15% except on A i.e on
(66,342.61- 64,628.02 =) 1,714.59
Cost of 12.25 cum
Cost of 1 cum
Say
205
Unit
Quantity
Rate
Amount
cum
12.25
day
day
day
day
day
1.225
2.45
0.49
0.49
0.49
297.00
328.00
393.00
361.00
328.00
sqm
14.00
309.80 4337.20 A
4921.70 60290.82 A
363.83
803.60
192.57
176.89
160.72
66325.63
16.98
66342.61
257.19
66599.80
5436.72
5436.70
5.21
Code
1015
9999
9999
0102
0114
Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands
3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel
sections in beams, columns and grillages excluding cost of hangers.
Description
Details of cost for 10 sqm.
MATERIAL:
Expanded metal 20 mm x 60 mm and 1.6 mm
thick = 10 sqm
wastage 5 % = 0.50 sqm
Total =10.50 sqm
Mild steel expanded metal 20x60 mm
strands
Carriage of expended metal
Wire for tieing
Cost of bending and placing in position
Blacksmith 1 st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
10.50
290.00
3045.00
L.S.
L.S.
13.52
13.52
1.70
1.70
22.98
22.98
day
day
0.25
0.25
393.00
297.00
98.25
74.25
3263.46
32.63
3296.09
494.41
3790.50
379.05
379.05
5.22
5.22.1
Code
1004`
2205
9999
0102
0114
9999
Description
Unit
206
Quantity
Rate
Amount
quintal
1.05
4500.00
4725.00
tonne
L.S.
0.105
26.00
94.80
1.70
9.95
44.20
day
day
L.S.
1.00
1.00
26. 91
393.00
297.00
1.70
393.00
297.00
45.75
5514.90
55.15
5570.05
835.51
6405.56
64.06
64.05
5.22.2
Code
1224
2205
0102
0114
9999
Unit
Quantity
Rate
quintal
1.05
5500.00
5775.00
tonne
0.105
94.80
9.95
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
6520.70
65.21
6585.91
987.89
7573.80
75.74
75.75
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 kilogram
Cost of 1 kilogram
Say
5.22.3
Code
1005
2205
9999
0102
0114
9999
Amount
207
Rate
Amount
quintal
1.05
4700.00
4935.00
tonne
L.S.
0.105
26.00
94.80
1.70
9.95
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
5.22.4
Code
1005
2205
9999
0102
0114
9999
5.22.5
Code
1021
2205
9999
0103
0114
9999
Unit
Quantity
Rate
Amount
quintal
1.05
4700.00
4935.00
tonne
L.S.
0.105
26.00
94.80
1.70
9.95
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
Unit
Quantity
sqm
13.548
430.00
5825.64
tonne
L.S.
0.105
26.00
94.80
1.70
9.95
44.20
day
day
L.S.
0.20
1.50
13. 52
361.00
297.00
1.70
72.20
445.50
22.98
6420.47
64.20
6484.67
972.70
7457.37
74.57
74.55
208
Rate
Amount
5.22.6
Code
1005
2205
9999
0102
0114
9999
5.22A
Unit
Quantity
Rate
Amount
quintal
1.05
4700.00
4935.00
tonne
L.S.
0.105
26.00
94.80
1.70
9.95
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
1004
2205
9999
0102
0114
9999
Description
Unit
209
Quantity
Rate
Amount
quintal
1.05
4500.00
4725.00
tonne
0.105
94.80
9.95
L.S.
26.00
1.70
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5514.90
55.15
5570.05
835.51
6405.56
64.06
64.05
1224
2205
0102
0114
9999
Description
Unit
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
5500.00
94.80
5775.00
9.95
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 kilogram
Cost of 1 kilogram
Say
6520.70
65.21
6585.91
987.89
7573.80
75.74
75.75
1005
2205
9999
0102
0114
9999
Description
Unit
210
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
4700.00
94.80
4935.00
9.95
L.S.
26.00
1.70
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
1005
2205
9999
0102
0114
9999
Description
Unit
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
4700.00
94.80
4935.00
9.95
L.S.
26.00
1.70
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1 .70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
Unit
Quantity
1021
2205
9999
0103
0114
9999
Description
Details of cost for 1 quintal.
MATERIAL:
Hard drawn steel wire fabric 100kg/7.75kg
= 12.903 sqm.,
Wastage 5 % = 0.64 sqm
Total =13.548 sqm
Hard drawn steel wire fabric
Carriage of steel
1.05q = 0.105 tonne
Cover block
LABOUR:
For cutting and laying in position
Blacksmith 2nd class
Beldar
Sundries and binding wire
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 kilogram
Cost of 1 kilogram
Say
211
Rate
Amount
sqm
tonne
13.548
0.105
430.00
94.80
5825.64
9.95
L.S.
26.00
1.70
44.20
day
day
L.S.
0.20
1.50
13.52
361.00
297.00
1.70
72.20
445.50
22.98
6420.47
64.20
6484.67
972.70
7457.37
74.57
74.55
1005
2205
9999
0102
0114
9999
5.23
Code
3.3
0155
0115
0101
9999
9999
Description
Unit
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
4700.00
94.80
4935.00
9.95
L.S.
26.00
1.70
44.20
day
day
L.S.
1.00
1.00
26.91
393.00
297.00
1.70
393.00
297.00
45.75
5724.90
57.25
5782.15
867.32
6649.47
66.49
66.50
Smooth finishing of the exposed surface of RCC work with 6mm thick cement
mortar 1:3 (1 cement : 3 fine sand).
Description
Details of cost for 10 sqm.
MATERIAL:
Cement mortar 1:3 (cement:3 fine sand)
Rate as per Item Number 3.3 of SH: Mortars
Mason (average)
Coolie
Bhisti
Extra for removing burrs, cleaning with wire
brushes pock marking with pointed tool etc.
complete
Scaffolding and Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
212
Unit
Quantity
Rate
Amount
cum
day
day
day
L.S.
0.072
0.51
0.75
0.92
13.39
3844.80
377.00
297.00
328.00
1.70
276.83
192.27
222.75
301.76
22.76
L.S.
11.70
1.70
19.89
1036.26
10.36
1046.62
156.99
1203.61
120.36
120.35
5.24
Code
3.7
0367
2209
0123
0124
0114
9999
0983
2261
9999
9999
5.25
Code
0967
0103
9999
Extra for rendering smooth the top of suspended floors, landings and staircases
(treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand) including a
floating coat of neat cement and protecting the surface with a layer of 7.5 cm of
earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in
mud mortar in case of landings and steps including subsequent removal and
cleaning of the same.
Description
Details of cost for 10 sqm.
MATERIAL:
Cement mortar 1:2 (1 Cement: 2 Coarse sand)
Rate as per Item Number 3.7 of SH: Mortars
Finishing (Floating coat) with
Portland Cement
Carriage of cement
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Beldar
Spreading earth on floor (7.5mm thick)
Spreading sand 15mm thick on floor
Fine sand (zone IV)
Carriage of fine sand (1 part badarpur sand: 2
parts jamuna sand)
Disposal of earth spread over floor protection
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0 .03
5107.40
153.22
tonne
tonne
0.0213
0.0213
5240.00
94.80
111.61
2.02
day
day
day
L.S.
0.20
0.20
0.25
35. 49
393.00
361.00
297.00
1.70
78.60
72.20
74.25
60.33
cum
cum
0.15
0.15
650.00
106.64
97.50
16.00
L.S.
L.S.
5.33
6.24
1.70
1.70
9.06
10.61
685.40
6.85
692.25
103.84
796.09
79.61
79.60
Providing and fixing in position copper plate as per design for expansion joints.
Description
Unit
213
Quantity
Rate
Amount
10.56
270.00
2851.20
0.25
6.24
361.00
1.70
90.25
10.61
2952.06
29.52
2981.58
447.24
3428.82
324.70
324.70
5.26
Code
0313
2211
0370
0123
0124
0114
9999
5.27
Code
0309`
2211
0370
2200
0367
Unit
Quantity
Rate
Amount
tonne
1.24
37000.00
45880.00
tonne
quintal
1.24
2.48
106.64
400.00
132.23
992.00
tonne
0.248
121.88
30.23
day
day
day
L.S.
2.52
2.52
8.06
121.16
393.00
361.00
297.00
1.70
990.36
909.72
2393.82
205.97
51534.33
515.34
52049.67
7807.45
59857.12
532.06
532.05
Providing and filling in position bitumen mix filler of Proportion 80 kg of hot bitumen,
1 kg of cement and 0.25 cubic metre of coarse sand for expansion joints.
Description
Unit
214
Quantity
Rate
Amount
tonne
0.303
40000.00
12120.00
tonne
quintal
0.303
0.606
106.64
400.00
32.31
242.40
tonne
tonne
0.061
0.0036
121.88
5240.00
7.43
18.86
Code
2209
0982
2203
0123
0124
0114
9999
5.28
Code
0339
0316
0314
9999
0123
0124
0114
9999
Description
Unit
Quantity
Rate
Amount
Carriage of cement
Coarse sand (zone III)
1/4th of the quantity of cement in kg =
3.6/4 = 0.90 cum
Carriage of coarse sand
LABOUR:
for heating and filling
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 300m length 2.5cm wide and 15cm
depth Cost per cm depth per cm width
per 100m
Say
tonne
cum
0.0036
0.90
94.80
1120.00
0.34
1008.00
cum
0.90
106.64
95.98
day
day
day
L.S.
2.52
2.52
8.06
121.16
393.00
361.00
297.00
1.70
990.36
909.72
2393.82
205.97
18025.19
180.25
18205.44
2730.82
20936.26
186.10
186.10
Unit
215
Quantity
Rate
Amount
7.50
350.00
2625.00
1.25
45.00
56.25
31.50
26.91
26.00
1.70
819.00
45.75
0.12
0.12
0.25
26.91
393.00
361.00
297.00
1.70
47.16
43.32
74.25
45.75
3756.48
37.56
3794.04
569.11
4363.15
436.32
436.30
5.29
Providing and fixing sheet covering over expansion joints with iron screws as per
design.
5.29.1
0236
2273
9999
0112
0114
Description
Details of cost for 3.00m length.
MATERIAL:
Non- Asbestos Multi purpose fibre (high
impact poly propelene reinforced) cement
board 6 mm thick
Carriage of A.C.sheet and accessories
0.45sqm = 0.0049 tonne
50mm iron screws with washer and raw plugs
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 3.00 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
sqm
0.47
200.00
94.00
tonne
0.0049
94.80
0.46
L.S.
40.30
1.70
68.51
day
day
0.20
0.20
361.00
297.00
72.20
59.40
294.57
2.95
297.52
44.63
342.15
114.05
114.05
Unit
Quantity
sqm
0.63
200.00
126.00
tonne
0.0065
94.80
0.62
L.S.
53.82
1.70
91.49
day
day
0.27
0.27
361.00
297.00
97.47
80.19
395.77
3.96
399.73
59.96
459.69
153.23
153.25
0236
2273
9999
0112
0114
Description
Details of cost for 3.00 m length.
MATERIAL:
Non- Asbestos Multi purpose fibre (high
impact poly propelene reinforced) cement
board 6 mm thick
Carriage of A.C.sheet and accessories
0.60sqm. = 0.0065 tonne
50mm iron screws with washer and rawl
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 3.00 metre
Cost of 1 metre
Say
216
Rate
Amount
5.29.2
2391
0639
9999
0112
0114
9999
Description
Unit
Quantity
Rate
Amount
metre
1.00
228.00
228.00
100 Nos
6.00
35.00
2.10
L.S.
1.04
1.70
1.77
day
day
L.S.
0.067
0.067
1.82
361.00
297.00
1.70
24.19
19.90
3.09
279.05
2.79
281.84
42.28
324.12
324.10
2392`
0639
9999
0112
0114
9999
5.30
Code
0123
0124
0115
Description
Unit
Quantity
Rate
Amount
metre
1.00
323.00
323.00
100 Nos
6.00
35.00
2.10
L.S.
1.30
1.70
2.21
day
day
L.S.
0.089
0.089
2.34
361.00
297.00
1.70
32.13
26.43
3.98
389.85
3.90
393.75
59.06
452.81
452.80
Add for plaster drip course / groove in plastered surface or moulding to R.C.C.
projections.
Description
Details of cost for 30 metre long throating or
plaster or moulding.
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
217
Unit
Quantity
day
day
day
0.50
0.50
1.00
Rate
393.00
361.00
297.00
Amount
196.50
180.50
297.00
Code
9999
Description
Add for material (cement mortar etc.)
Unit
Quantity
L.S.
26.91
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 30 metre
Cost of 1 metre
Say
5.31
Code
0011
0114
5.32
Code
0123
0124
0114
0115
Amount
45.75
719.75
7.20
726.95
109.04
835.99
27.87
27.85
Extra for laying reinforced cement concrete in or under water and/ or liquid mud
including cost of pumping or bailing out water and removing slush etc., complete.
Note:- The quantity will be calculated by multiplying the depth measured from the
subsoil water level upto the centre of gravity of the R.C.C. under subsoil water
with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth
of centre of gravity shall be reconed correct to 0.1 m. 0.05 m or more shall be taken
as 0.1 and less than 0.05 m ignored. No extra payment shall be made for placing
reinforcement or centering & shuttering under subsoil water conditions.
Description
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
Analysis same as per item number 4.15
Pumping hours = 3 hrs. or 0.375 day
Hire charges of Pump set of capacity 4000
litres/hour
for cleaning slush
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 14cum. per 0.30m depth
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
0.375
550.00
206.25
day
4.00
297.00
1188.00
1394.25
13.94
1408.19
211.23
1619.42
385.58
385.60
218
Unit
Quantity
day
day
day
day
0.02
0.02
0.25
0.15
Rate
393.00
361.00
297.00
297.00
Amount
7.86
7.22
74.25
44.55
133.88
1.34
135.22
20.28
155.50
155.50
5.33
Providing and laying in position machine batched and machine mixed design mix
M-25 grade cement concrete for reinforced cement concrete work, using cement
content as per approved design mix, including pumping of concrete to site of laying
but excluding the cost of centering, shuttering, finishing and reinforcement,
including admixtures in recommended proportions as per IS: 9103 to accelerate,
retard setting of concrete, improve workability without impairing strength and
durability as per direction of Engineer-in-charge.
Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less
cement used as per design mix is payable or recoverable separately.
5.33.1
Code
0295
0297
2202
0982
2203
0367
2209
7318
0004
0009
0155
0114
0101
0012
9999
5.33.2
Code
0295
Unit
Quantity
Rate
Amount
cum
0.57
1200.00
684.00
cum
0.28
1050.00
294.00
cum
0.85
106.64
90.64
cum
cum
tonne
tonne
kilogram
0.425
0.425
0.33
0.33
1.65
1120.00
106.64
5240.00
94.80
38.00
476.00
45.32
1729.20
31.28
62.70
cum
1.00
350.00
350.00
cum
1.00
150.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
4911.28
49.11
4960.39
744.06
5704.45
5704.45
219
Unit
Quantity
cum
0.57
Rate
1200.00
Amount
684.00
Code
0297
2202
0982
2203
0367
2209
7318
0004
0009
0155
0114
0101
0012
9999
Description
Unit
Quantity
Rate
Amount
cum
0.28
1050.00
294.00
cum
0 .85
106.64
90.64
cum
cum
tonne
tonne
kilogram
0.425
0.425
0.33
0.33
1.65
1120.00
106.64
5240.00
94.80
38.00 6
476.00
45.32
1729.20
31.28
2.70
cum
1.00
350.00
350.00
cum
1.00
150.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
day
1.88
297.00
558.36
5469.64
54.70
5524.34
828.65
6352.99
6353.00
5.34
5.34.1
Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement
content considered in M-30 is @ 340 kg/cum).
Code
0367
2209
Description
Unit
tonne
tonne
220
Quantity
0.01
0.01
Rate
5240.00
94.80
Amount
52.40
0.95
Code
7318
Description
Unit
kilogram
Quantity
0 .05
Rate
38.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
5.34.2
Code
0367
2209
7318
Code
0367
2209
7318
1.90
55.25
0.55
55.80
8.37
64.17
64.15
Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note : Cement
content considered in M-35 is @ 350 kg/cum).
Description
Unit
Quantity
Rate
tonne
tonne
0.02
0.02
5240.00
94.80
104.80
1.90
kilogram
0.10
38.00
3.80
110.50
1.10
111.60
16.74
128.34
128.35
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
5.34.3
Amount
Amount
Unit
tonne
tonne
0.03
0.03
5240.00
94.80
157.20
2.84
kilogram
0.15
38.00
5.70
165.74
1.66
167.40
25.11
192.51
192.50
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
221
Quantity
Rate
Amount
5.35
Code
0367
2209
Add for using extra cement in the items of design mix over and above the specified
cement content therein.
Description
Unit
tonne
tonne
Quantity
0.10
0.10
Rate
5240.00
94.80
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 quintal
Say
5.36
Code
5.2.2
5.9.15
Amount
524.00
9.48
533.48
5.33
538.81
80.82
619.63
619.65
Providing and placing in position precast reinforced cement concrete waffle units,
square or rectangular as per design and shape for floors and roofs in 1:1:3 (1
cement : 1 coarse sand : 3 graded stone aggregate 10 mm nominal size), including
flush or deep ruled pointing at joints in cement mortar 1:2 (1 cement : 2 Fine sand),
making necessary holes of required sizes for carrying through service lines etc.,
providing steel hooks for lifting etc, form work in precasting, handling, hoisting,
centering and erection complete for all floor levels but excluding the cost of
reinforcement.
Description
Unit
222
Quantity
Rate
Amount
cum
1.38
6319.20 8720.50 A
sqm
45.86
186.40 8548.30 A
Code
10.2
9999
9999
0126
0114
13.35.1
Description
Unit
Quantity
Rate
Amount
kg
9.00
73.65
662.85 A
L.S.
L.S.
13.00
79.95
1.70
1.70
22.10
135.92
day
day
1.00
6.00
393.00
297.00
393.00
1782.00
sqm
16.54
78.15 1292.60 A
21557.27
23.33
21580.60
353.45
21934.05
15894.24
15894.25
5.37
Providing and laying in position ready mixed M-25 grade concrete for reinforced
cement concrete work, using cement content as per approved design mix,
manufactured in fully automatic batching plant and transported to site of work in
transit mixer for all leads, having continuous agitated mixer, manufactured as per
mix design of specified grade for reinforced cement concrete work including
pumping of R.M.C. from transit mixer to site of laying , excluding the cost of
centering, shuttering finishing and reinforcement including cost of admixtures in
recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,
improve workability without impairing strength and durability as per direction of
the Engineer - in - charge.
Note:- Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement
used as per design mix is payable/ recoverable separately.
5.37.1
Code
0295
0297
2202
0982
2203
0367
2209
Description
Details of cost for 1.00 cum.
MATERIAL:
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
Carriage of cement
223
Unit
Quantity
Rate
Amount
cum
0.57
1200.00
684.00
cum
0.28
1050.00
294.00
cum
0.85
106.64
90.64
cum
cum
tonne
tonne
0.425
0.425
0.33
0.33
1120.00
106.64
5240.00
94.80
476.00
45.32
1729.20
31.28
Code
7318
0004
0029
0009
0155
0114
0101
0012
9999
5.37.2
Code
0295
0297
2202
0982
2203
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
Description
Unit
Quantity
Rate
Amount
1.65
38.00
62.70
1.00
350.00
350.00
10.00
1.00
30.00
150.00
300.00
150.00
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
5211.28
52.11
5263.39
789.51
6052.90
6052.90
Unit
224
Quantity
Rate
Amount
0.57
1200.00
684.00
0.28
1050.00
294.00
0.85
106.64
90.64
0.425
0.425
0.33
0.33
1.65
1120.00
106.64
5240.00
94.80
38.00
476.00
45.32
1729.20
31.28
62.70
1.00
10.00
1.00
350.00
30.00
150.00
350.00
300.00
150.00
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
Code
0115
Description
Coolie
Unit
Quantity
day
1.88
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
5.38
Code
0009
5.40
Amount
558.36
5769.64
57.70
5827.34
874.10
6701.44
6701.45
Extra for R.C.C. / B.M.C / R.M.C. work above floor V level for each four floors or
part thereof.
Description
Details of cost for 1 cum.
MATERIAL:
Pumping charges of concrete including Hire
charges of pump, piping work & accessories etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
cum
1.00
Rate
150.00
Amount
150.00
150.00
1.50
151.50
22.72
174.22
174.20
Providing and laying in position ready mixed M-25 grade concrete for reinforced
cement concrete work, using fly ash and cement content as per approved design
mix, and manufactured in fully automatic batching plant and transported to site of
work in transit mixer for all leads, having continuous agitated mixer, manufactured
as per mix design of specified grade for reinforced cement concrete work, including
pumping of R.M.C. from transit mixer to site of laying, excluding the cost of
centering, shuttering, finishing and reinforcement, including cost of admixtures in
recommended proportions as per IS : 9103 to accelerate / retard setting of concrete,
improve workability without impairing strength and durability as per direction of
the Engineer - in - charge.
Note:- (1) Cement content considered in this item is @330 kg/ cum. Excess/ less
cement used as per design mix is payable /recoverable separately.
(2) Fly ash conforming to grade I of IS: 3812 (part-1) only be used as part replacement
of OPC as per IS: 456. Uniform blending with cement to be ensured in accordance
with clause 5.2 and 5.2.1 of IS: 456 - 2000 in the items of BMC and RMC.
5.40.1
Code
0293
0295
2206
225
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
Code
2202
0982
2203
1980
2262
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
5.40.2
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318
Description
Unit
Quantity
Rate
Amount
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.33
0.33
1 .65
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1729.20
31.28
62.70
cum
1.00
350.00
350.00
km/cum
cum
10.00
1.00
30.00
150.00
300.00
150.00
day
day
day
day
L.S.
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
5138.14
51.38
5189.52
778.43
5967.95
5967.95
226
Unit
Quantity
Rate
Amount
cum
0.65
1000.00
650.00
cum
0.24
1200.00
288.00
cum
0.65
115.92
75.35
cum
0.24
106.64
25.59
cum
cum
cum
cum
tonne
tonne
kilogram
0.37
0.37
0.21
0.21
0.33
0.33
1.65
1120.00
106.64
7.75
106.64
5240.00
94.80
38.00
414.40
39.46
1.63
22.39
1729.20
31.28
62.70
Code
0004
0029
0009
0155
0114
0101
0012
9999
0115
Description
Unit
Quantity
Rate
Amount
1.00
350.00
350.00
10.00
1.00
30.00
150.00
300.00
150.00
0.17
2.00
0.90
0.07
13.00
377.00
297.00
328.00
325.00
1.70
64.09
594.00
295.20
22.75
22.10
1.88
297.00
558.36
5696.50
56.96
5753.46
863.02
6616.48
6616.50
5.41
Supplying and applying pre tested and approved water based concrete curing
compound to concrete/ masonry surface, all as per manufacturers specification
and direction of Engineer-in-charge.
5.41.1
Code
7178
0124
0115
0101
9999
0114
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Chemical ASTMC-type I
Coverage of chemical 5 sqm per kg.
Chemical required for 10 sqm = 10 /5 = 2.00 kg
LABOUR:
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding and sundries
Extra labour for clean up process
Beldar
Extra machinery, hand pump, compressor etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
227
Unit
Quantity
Rate
Amount
kg
2.00
110.00
220.00
day
day
day
L.S.
0.46
0.23
0.10
8.06
361.00
297.00
328.00
1.70
166.06
68.31
32.80
13.70
day
L.S.
0.75
80.00
297.00
1.70
222.75
136.00
859.62
8.60
868.22
130.23
998.45
99.85
99.85
5.41.2
Code
7281
0124
0115
0101
9999
0114
9999
Unit
Quantity
Rate
Amount
kg
2.00
170.00
340.00
day
day
day
L.S.
0.46
0.23
0.10
8.06
361.00
297.00
328.00
1.70
166.06
68.31
32.80
13.70
day
L.S.
0.75
80.00
297.00
1.70
222.75
136.00
979.62
9.80
989.42
148.41
1137.83
113.78
113.80
5.42
5.42.1
Code
2394
9999
9999
Description
Unit
228
Quantity
Rate
Amount
each
1.00
67.00
67.00
L.S.
L.S.
3.77
17.77
1.70
1.70
6.41
30.21
103.62
1.04
104.66
15.70
120.36
120.35
5.42.2
Code
2395
9999
9999
Unit
Quantity
Rate
each
1.00
88.00
88.00
L.S.
L.S.
5.90
25.17
1 .70
1.70
10.03
42.79
140.82
1.41
142.23
21.33
163.56
163.55
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
5.42.3
Code
2396
9999
9999
Unit
Quantity
Rate
Code
2397
9999
9999
Amount
each
1.00
130.00
130.00
L.S.
L.S.
8.69
29.61
1.70
1.70
14.77
50.34
195.11
1.95
197.06
9.56
226.62
226.60
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
5.42.4
Amount
Unit
229
Quantity
Rate
Amount
each
1.00
192.00
192.00
L.S.
L.S.
12.84
32.57
1.70
1.70
21.83
55.37
269.20
2.69
271.89
40.78
312.67
312.65
5.42.5
Code
2398
9999
9999
Unit
Quantity
Rate
Amount
each
1.00
231.00
231.00
L.S.
L.S.
15.48
32.57
1.70
1.70
26.32
55.37
312.69
3.13
315.82
47.37
363.19
363.20
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
5.43
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as
per design for expansion joints.
5.43.1
200 mm wide.
Code
Description
2393
8647
9999
0103
0114
9999
5.43.2
300 mm wide.
Code
Description
2393
8647
9999
0103
0114
Unit
Quantity
kg
1.60
275.00
440.00
Nos
L.S.
6.00
1.30
29.00
1.70
1.74
2.21
day
day
L.S.
0.067
0.067
2.34
361.00
297.00
1.70
24.19
19.90
3.98
492.02
4.92
496.94
74.54
571.48
571.50
Unit
Quantity
230
Rate
Rate
Amount
Amount
2.40
275.00
660.00
6.00
1.30
29.00
1.70
1.74
2.21
0.067
0.067
361.00
297.00
24.19
19.90
Code
9999
Description
Sundries
Unit
Quantity
L.S.
2.34
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
Amount
3.98
712.02
7.12
719.14
107.87
827.01
827.00
5.44
Providing and fixing of expansion joint system related with floor location as per
drawings and direction of Engineer-In-Charge. The joints system will be of extruded
aluminum base members, self aligning / self centering arrangement and support
plates etc. as per ASTM B221-02. The system shall be such that it provides floor to
floor /floor to wall expansion control system for various vertical localtion in load
application areas that accommodates multi directional seismic movement without
stress to it's components. System shall consist of metal profiles with a universal
aluminum base member designed to accommodate various project conditions and
finish floor treatments. The cover plate shall be designed of width and thickness
required to satisfy projects movement and loading requirements and secured to
base members by utilizing manufacturers pre-engineered self-centering
arrangement that freely rotates / moves in all directions. The Self centering
arrangement shall exhibit circular sphere ends that lock and slide inside the
corresponding aluminum extrusion cavity to allow freedom of movement and
flexure in all directions including vertical displacement. Provision of Moisture Barrier
Membrane in the Joint System to have watertight joint is mandatory requirement
all as per the manufactures design and as approved by Engineer -in-Charge .
(Material shall confirm to ASTM 6063).
5.44.1
Code
2403
2402
9999
0102
0123
0114
Description
Unit
metre
kg
L.S.
day
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
231
Quantity
Rate
Amount
1.00
4.25
124.90
4500.00
150.00
1.70
4500.00
637.50
212.33
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
5453.33
54.53
5507.86
826.18
6334.04
6334.05
5.44.2
Code
2404
2402
9999
0102
0123
0114
Unit
metre
kg
L.S.
Quantity
Rate
1.00
4.50
124.90
5000.00
150.00
1.70
5000.00
675.00
212.33
day
day
day
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
5990.83
59.91
6050.74
907.61
6958.35
6958.35
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.44.3
Code
2405
2402
9999
0102
0123
0114
metre
kg
L.S.
day
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.45
Amount
Rate
Amount
1.00
4.75
124.90
5400.00
150.00
1.70
5400.00
712.50
212.33
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
6428.33
64.28
6492.61
973.89
7466.50
7466.50
Providing and fixing of expansion joint system related with wall joint (internal/
external) location as per drawings and direction of Engineer-In-Charge. The
joints shall be of extruded aluminum base members, self aligning / centering
arrangement and support plates as per ASTM B221-02. The material shall be
such that it provides an Expansion Joints System suitable for vertical wall to
wall/ wall to corner application, both new and existing construction in office
Buildings & complexes with no slipping down tendency amongst the
components of the Joint System. The Joint System shall utilize light weight
aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically
snap locking the multicellular to facilitate movement. (Material shall confirm
to ASTM 6063).
232
5.45.1
Code
2409
2402
9999
0102
0123
0114
Unit
metre
kg
L.S.
Quantity
Rate
1.00
4.25
124.90
3400.00
150.00
1.70
3400.00
637.50
212.33
day
day
day
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
4353.33
43.53
4396.86
659.53
5056.39
5056.40
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.45.2
Code
2410
2402
9999
0102
0123
0114
metre
kg
L.S.
Rate
Code
2411
2402
9999
0102
0123
Amount
1.00
4.50
124.90
3700.00
150.00
1.70
3700.00
675.00
212.33
day
day
day
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
4690.83
46.91
4737.74
710.66
5448.40
5448.40
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.45.3
Amount
metre
kg
L.S.
day
day
233
Rate
Amount
1.00
4.75
124.90
4000.00
150.00
1.70
4000.00
712.50
212.33
0.05
0.10
393.00
393.00
19.65
39.30
Code
0114
Description
Beldar
Unit
Quantity
day
0.15
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
Amount
44.55
5028.33
50.28
5078.61
761.79
5840.40
5840.40
5.46
Providing and fixing of expansion joint system of approved make and manufactures
for various roof locations as per approved drawings and direction of Engineer-InCharge. The joints shall be of extruded aluminum base members with, self aligning
and self centering arragement support plates asper ASTM B221-02. The system
shall be such that it provides watertight roof to roof/roof to corner joint cover
expansion control system that is capable of accommodating multidirectional
seismic movement without stress to its components. System shall consist of metal
profile that incorporates a universal aluminum base member designed to
accommodate various project conditions and roof treatments. The cover plate shall
be designed of width and thickness required to satisfy movement and loading
requirements and secured to base members by utilizing manufacturers preengineered self-centering arrangement that freely rotates / moves in all directions.
The Self centering arrangement shall exhibit circular sphere ends that lock and
slide inside the corresponding aluminum extrusion cavity to allow freedom of
movement and flexure in all directions including vertical displacement. The Joint
System shall resists damage or deterioration from the impact of falling ice, exposure
to UV, airborne contaminants and occasional foot traffic from maintenance
personnel. Provision of Moisture Barrier Membrane in the Joint System to have
water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
5.46.1
Code
2399
2402
9999
0102
0123
0114
Description
Unit
metre
kg
L.S.
day
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
234
Quantity
Rate
Amount
1.00
4.25
124.90
4500.00
150.00
1.70
4500.00
637.50
212.33
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
5453.33
54.53
5507.86
826.18
6334.04
6334.05
5.46.2
Code
2400
2402
9999
0102
0123
0114
Unit
metre
kg
L.S.
Quantity
Rate
1.00
4.50
124.90
4800.00
150.00
1.70
4800.00
675.00
212.33
day
day
day
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
5790.83
57.91
5848.74
877.31
6726.05
6726.05
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.46.3
Code
2401
2402
9999
0102
0123
0114
metre
kg
L.S.
day
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
5.47
Amount
Rate
Amount
1.00
4.75
124.90
5000.00
150.00
1.70
5000.00
712.50
212.33
0.05
0.10
0.15
393.00
393.00
297.00
19.65
39.30
44.55
6028.33
60.28
6088.61
913.29
7001.90
7001.90
Providing and fixing in position factory made precast RCC M-40 doors and windows
frames having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos,
6 mm dia main bars tied with 3 mm M.S stirrups placed @ 200 mm C/C and 6
numbers high strength polymer blocks of required size for fixing hinges including
providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm
dia fully threaded bolts for fixing hold fast on vertical members, providing suitable
arrangement for recieving sliding door bolts and tower bolt etc all complete, as per
the direction of Engineer in charge. (The cost of hold fast and cc block of 1:3:6 mix
is also included in the item.) The frame shall be measured in running meter correct
to two places of decimal.
235
5.47.1
Code
5.33.1
5.34.3
1005
0596
4.3.3
14.2.1
13.48.2
9999
5.47.2
Code
5.33.1
5.34.3
1005
0596
4.3.3
14.2.1
13.48.2
Unit
Quantity
Rate
Amount
cum
0.039
cum
0.039
192.50
7.51 AQ
quintal
10 nos
0.0468
6
4700.00
60.00
219.96
36.00
sqm
1.27
423.00
537.21 A
each
1.00
719.20
719.20 A
sqm
1.27
76.65
97.35 A
L.S.
100.67
1.70
171.14
2068.34
4.85
5704.45 222.47 AP
2073.19
73.42
2146.61
412.81
412.80
236
Unit
Quantity
Rate
Amount
cum
0.031
cum
0.031
192.50
5.97 AQ
quintal
10 nos
0.0372
6.00
4700.00
60.00
45.70
174.84
36.00
sqm
1.14
423.00
482.22 A
each
1.00
719.20
719.20 A
sqm
1.14
76.65
87.38 A
5704.45 176.84 AP
Code
9999
Description
Unit
Sundries
L.S.
Quantity
100.67
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,899.29 - 1,471.61 =) 427.68
TOTAL
Add CPOH @ 15% except on A i.e on
(1,903.57 -1,471.61 =) 431.96
Cost of 5.20 metre
Cost of 1 metre
Say
5.47.3
Code
5.33.1
5.34.2
1005
0596
4.3.3
14.2.1
13.48.2
9999
5.48
Amount
171.14
1899.29
4.28
1903.57
64.79
1968.36
378.53
378.55
Unit
Quantity
Rate
Amount
cum
0.027
cum
0.027
128.35
3.47 AQ
quintal
10 nos
0.0324
6.00
4700.00
60.00
39.37
152.28
36.00
sqm
1.07
423.00
452.61 A
each
1.00
719.20
719.20 A
sqm
1.07
76.65
82.02 A
L.S.
100.67
1.70
171.14
1810.11
3.99
5704.45 154.02 AP
1814.10
60.42
1874.52
360.49
360.50
237
5.48.1
Code
5.48X
5.48.2
Code
5.48Y
5.48.3
Code
Unit
each
Quantity
1.00
Rate
Amount
561929.40 561929.40 P
61812.23
7867.01
631608.64
6316.09
637924.73
95688.71
733613.44
6113.45
6113.45
Unit
each
Quantity
1.00
Rate
Amount
664559.60 664559.60 P
73101.56
9303.83
746964.99
7469.65
754434.64
113165.20
867599.84
7230.00
7230.00
238
Unit
Quantity
cum
cum
1.00
1.00
Rate
Amount
7862.10 7862.10 P
7230.00 7230.00 Q
632.10
632.10
5.48Z
5.48X
Code
0367
0982
0295
0297
7318
0128
0123
0114
0066
0070
0052
Description
Unit
each
Quantity
1.00
Rate
Amount
722659.70 722659.70 P
79492.57
10117.24
812269.50
8122.70
820392.20
123058.83
943451.03
7862.09
7862.10
Annexure for item 5.48.1 , Providing M 50 grade Reinfroced cement Concrete data
for 120.00 cum.
Description
Unit
239
Quantity
Rate
Amount
tonne
cum
cum
57.60
54.00
64.80
5240.00 301824.00
1120.00 60480.00
1200.00 77760.00
cum
43.20
1050.00
45360.00
kilogram
223.20
38.00
8481.60
day
day
day
0.94
3.50
20.00
328.00
393.00
297.00
308.32
1375.50
5940.00
hour
1.60
2500.00
4000.00
hour
hour
1.60
1.60
700.00
800.00
1120.00
1280.00
Code
0029
0009
5.48Y
Code
0367
0982
0295
0297
7318
8953
0128
0123
0114
0066
0070
0052
0029
0009
Description
Unit
Distance = 10 km
Qty= 120.00 cum
Total = 120.00x 10= 1200
Carriage of concrete by transit mixer
km/cum
Pumping charges of concrete including Hire
cum
charges of pump, piping work & accessories etc.
TOTAL
Cost of each
Say
Quantity
1200.00
120.00
Rate
30.00
150.00
Amount
36000.00
18000.00
561929.42
561929.42
561929.40
Annexure for item 5.48.2 , Providing M 60 grade Reinfroced cement Concrete data
for 120.00 cum.
Description
Unit
240
Quantity
Rate
Amount
57.60
54.98
57.54
5240.00 301824.00
1120.00 61577.60
1200.00 69048.00
38.22
1050.00
230.40
3600
40131.00
38.00
8755.20
32.00 115200.00
0.94
3.50
20.00
328.00
393.00
297.00
308.32
1375.50
5940.00
1.60
1.60
1.60
2500.00
700.00
800.00
4000.00
1120.00
1280.00
1200.00
120.00
30.00
150.00
36000.00
18000.00
664559.62
664559.62
664559.60
5.48Z
Code
0367
0982
0295
0297
8953
7318
0128
0123
0114
0066
0070
0052
0029
0009
5.49
Annexure for item 5.48.3 , Extra for using M 60 grade Self Compacting Reinfroced
cement Concrete data for 120.00 cum.
Description
Unit
Quantity
Rate
Amount
57.60
54.00
64.80
5240.00 301824.00
1120.00 60480.00
1200.00 77760.00
43.20
1050.00
5040.00
230.40
45360.00
32.00 161280.00
38.00
8755.20
0.84
3.00
18.00
328.00
393.00
297.00
275.52
1179.00
5346.00
1.60
1.60
1.60
2500.00
700.00
800.00
4000.00
1120.00
1280.00
1200.00
120.00
30.00
150.00
36000.00
18000.00
722659.72
722659.72
722659.70
Constructing cast-in situ RCC diaphragm wall by providing and laying machine
batched, machine mixed, self compacting, ready mix reinforced cement concrete,
tramie controlled, of M 30 grade using minimum 400 kg. cement per cum of concrete
including providing and mixing required admixtures in recommended proportions
as per IS : 9103, as approved by the Engineer-in-charge, for achieving 150- 200mm
slump, for diaphragm wall having thickness as per approved structural design not
exceeding 600 mm, in pannels of required depth and lengths as per approved
drawing, including constructing necessary guide walls as required and as specified
including boring in all kinds of soils and rocks, including working in or under water
241
and / or liquid mud, in foul conditions and pumping or bailing out of water and
removing slush, including disposal of earth/ rock / slush etc. for all leads and all
lifts, including preparing, providing and re-circulating bentonite slurry in the trench
as and when required for all depths, including agitating bentonite slurry during
trenching etc., providing and fixing stop ends or form tubes, upto the required
depth of diaphragm wall including extracting the same after casting, including
chipping off the bentonite adulterated concrete or unsound concrete up to the cut
off level for obtaining the sound concrete, dressing undulations on the exposed
face of diaphragm wall after excavation by chipping / chiseling etc. including filling
the depression/ cavities with sound concrete etc. complete and as directed by the
Engineer-in-charge, including providing recess for bearing plates and fixing insert
boxes for inclined rock anchors etc. complete as per the specifications and approved
design and as directed by the Engineer-in- charge, .but excluding the cost of
reinforcement and inserts. (rates include cost of all inputs of labour, material and T
& P, cost of handling, lifting & placing in position the reinforcement cage in the
trench, including the additional cost of welding the reinforcement bars etc. involved
in the work and all other incidental expenditure for completing the work as directed
by the Engineer-in-charge), However, the actual area of the diaphragm wall, correct
to two places of decimal, from design bottom level to the design cut off level
(including portion anchored in the rock upto the design bottom level) only shall be
measured for payment.
Excess/less cement used for design mix including the extra cement required for
under water concreting is payable / recoverable separately.
Code
0082
5.1.3
5.22.6
5.33.1
Description
Unit
242
Quantity
Rate
Amount
240.00
1500.00 360000.00
11.70
5156.20 60327.54 A
819.00
66.50 54463.50 A
164.40
5704.45 937811.58 A
Code
5.34.1
7183
0367
0367
2209
0025
1005
10.22
9999
7318
8954
8955
0026
15.60
Description
Unit
243
Quantity
Rate
Amount
164.40
64.15
10546.26 A
13.81
3100.00
42811.00
6.90
5240.00
36156.00
2.40
2.40
1.00
5240.00
94.80
2200.00
12576.00
227.52
2200.00
18.084
4700.00
84994.80
6161.00
2.85 17558.85 A
23530.00
1.70
40001.00
276.19
240.00
240.00
38.00
4.50
72.00
10495.22
1080.00
17280.00
2.00
4200.00
8400.
193.32
123.85
23942.68 A
Code
15.3
9999
9999
Description
Unit
Quantity
cum
20.40
1176.40
23998.56 A
L.S.
L.S.
1177.00
19200.00
1.70
1.70
2000.90
32640.00
1779511.41
6508.62
244
Rate
Amount
1786020.03
98605.66
1884625.69
13087.68
13087.70
BRICK WORK
245
6.1
6.1.1
Code
2602
3.9
2201
9999
0123
0124
0115
0101
6.1.2
Code
2602
2201
3.11
9999
0123
0124
0115
0101
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in foundation and plinth in.
Cement mortar 1:4 (1 cement : 4 coarse sand).
Description
Unit
Quantity
Rate
Amount
1000 Nos
494.00
4800.00
2371.20
cum
1000 Nos
L.S.
0.25
494.00
2.73
3654.15
284.39
1.70
913.54
140.49
4.64
0.36
0.36
1.37
0.20
393.00
361.00
297.00
328.00
141.48
129.96
406.89
65.60
4173.80
41.74
4215.54
632.33
4847.87
4847.85
day
day
day
day
Unit
247
Quantity
Rate
Amount
494.00
4800.00
2371.20
494.00
284.39
140.49
0.25
2.73
2960.65
1.70
740.16
4.64
0.36
0.36
1.37
0.20
393.00
361.00
297.00
328.00
141.48
129.96
406.89
65.60
4000.42
40.00
4040.42
606.06
4646.48
4646.50
6.2
Brick work with common burnt clay modular bricks of class designation 7.5 in
foundation and plinth in :
6.2.1
Code
7900
2201
3.9
9999
0123
0124
0115
0101
6.2.2
Code
7900
2201
3.11
9999
0123
0124
0115
0101
Description
Unit
Quantity
Rate
Amount
1000 Nos
487.00
4500.00
2191.50
1000 Nos
487.00
284.39
138.50
cum
L.S.
0.22
2.73
3654.15
1.70
803.91
4.64
day
day
day
day
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
3743.41
37.43
3780.84
567.13
4347.97
4347.95
Unit
248
Quantity
Rate
Amount
487.00
4500.00
2191.50
487.00
284.39
138.50
0.22
2.73
2960.65
1.70
651.34
4.64
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
3590.84
35.91
3626.75
544.01
4170.76
4170.75
6.3
Brick work with common burnt clay machine moulded perforated bricks of class
designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to
floor five level in cement mortar 1:6 (1 cement : 6 coarse sand).
6.3.1
Code
7901
2201
3.11
9999
0123
0124
0115
0101
9999
0115
6.3.2
Code
7902
2201
3.11
9999
0123
0124
0115
0101
9999
Description
Unit
Quantity
Rate
Amount
1000 Nos
494.00
4600.00
2272.40
1000 Nos
494.00
284.39
140.49
cum
L.S.
0.25
2.73
2960.65
1.70
740.16
4.64
day
day
day
day
L.S.
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
day
1.13
297.00
335.61
4485.89
44.86
4530.75
679.61
5210.36
5210.35
Unit
Quantity
249
Rate
Amount
487.00
4600.00
2240.20
487.00
284.39
138.50
0.22
2.73
2960.65
1.70
651.34
4.64
0.44
0.44
1.43
0.18
16.38
393.00
361.00
297.00
328.00
1.70
172.92
158.84
424.71
59.04
27.85
Code
0115
Description
Coolie
Unit
Quantity
day
1.13
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Amount
335.61
4213.65
42.14
4255.79
638.37
4894.16
4894.15
6.4
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in.
6.4.1
Code
2602
3.9
2201
9999
0123
0124
0115
0101
9999
0115
6.4.2
Code
2602
3.11
2201
9999
Description
Unit
Quantity
Rate
Amount
1000 Nos
494.00
4800.00
2371.20
cum
1000 Nos
L.S.
0.25
494.00
2.73
3654.15
284.39
1.70
913.54
140.49
4.64
day
day
0.47
0.47
393.00
361.00
184.71
169.67
day
day
L.S.
day
1.80
0.20
22.36
1.13
297.00
328.00
1.70
297.00
534.60
65.60
38.01
335.61
4758.07
47.58
4805.65
720.85
5526.50
5526.50
Unit
250
Quantity
Rate
Amount
494.00
4800.00
2371.20
0.25
494.00
2.73
2960.65
284.39
1.70
740.16
140.49
4.64
Code
0123
0124
0115
0101
9999
0115
6.5
Code
0037
1235
6.6
Code
1008
9999
2205
0123
Description
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding
Extra labour element required for lifting of
materials (above floor two level upto floor five
level)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
L.S.
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
day
1.13
297.00
335.61
4584.69
45.85
4630.54
694.58
5325.12
5325.10
Extra for brick work/ AAC block masonry/ Tile brick masonry in super structure
above floor V level, for each four floors or part thereof by mechanical means.
Description
Details of cost for 5.3 cum per four floors.
Mobile crane
Fuel consumption per hour = 8 litre
Diesel oil
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5.3 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
0.125
6500.00
812.50
litre
8.00
48.63
389.04
1201.54
12.02
1213.56
182.03
1395.59
263.32
263.30
Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls with necessary weep and
vent holes including use of cores and cost of providing and fixing bitumastic coated
M.S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per
approved design.
Description
Unit
251
Quantity
Rate
Amount
quintal
L.S.
tonne
0.054
13.52
0.005
4200.00
1.70
94.80
226.80
22.98
0.47
day
0.37
393.00
145.41
Code
0124
0114
9999
Description
Unit
Quantity
day
day
L.S.
0.37
0.92
4.55
Rate
361.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
6.7
Code
6.12.1
0322
0123
0124
0114
6.8
Code
2602
Amount
133.57
273.24
7.74
810.21
8.10
818.31
122.75
941.06
94.11
94.10
Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in
superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm
/11.4 cm wide bitumen felt type 3 grade 1.
Description
Details of cost for 10m length.
MATERIAL:
Half brick masonry 1:3 (Average)
1x10x0.27 = 2.7 sqm
Rate as per Item Number 6.12.1 of SH: Brick
work
Bitumen felt type- 3 grade 1 lxl0mx11.4m =1.14
sqm.
Add for wastage and overlapping @ 5% = 0.06
sqm.
Total = 1.20 sqm
Bitumen felt :Type 3 grade 1
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,792.88 - 1,612.58 =) 180.30
TOTAL
Add CPOH @ 15% except on A i.e on
(1,794.68 - 1,612.58 =) 182.10
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
sqm
2.70
sqm
1.20
60.00
72.00
day
day
day
0.12
0.12
0.06
393.00
361.00
297.00
47.16
43.32
17.82
1792.88
1.80
597.25 1612.58 A
1794.68
27.32
1822.00
182.20
182.20
Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class
designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure
above plinth level and upto floor five level.
Description
Unit
252
1000 Nos
Quantity
377.00
Rate
4800.00
Amount
1809.60
Code
3.8
2201
0123
0124
0115
0101
9999
0115
6.9
Code
2602
3.8
2201
9999
5.9.9
9999
0123
0124
0115
0101
0115
Description
Unit
Quantity
Rate
Amount
0.181
377.00
4347.70
284.39
786.93
107.22
0.72
0.72
1.76
0.36
7.15
393.00
361.00
297.00
328.00
1.70
282.96
259.92
522.72
118.08
12.16
1.29
297.00
383.13
4282.72
42.83
4325.55
648.83
4974.38
497.44
497.45
Brick work in plain arches in superstructure above plinth level and upto floor five
level including centering and shuttering complete for span up to 6 metres with
common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement
mortar 1:3 (1 cement : 3 coarse sand).
Description
Unit
253
Quantity
Rate
Amount
494.00
4800.00
2371.20
0.25
494.00
2.73
4347.70
284.39
1.70
1086.92
140.49
4.64
2.25
1006.65 2264.96 A
18.85
1.70
32.04
0.53
0.53
2.29
0.20
393.00
361.00
297.00
328.00
208.29
191.33
680.13
65.60
1.13
297.00
335.61
Code
Description
Unit
Quantity
Rate
TOTAL
Add Water Charges @ 1% except on A i.e on
(7,381.21 - 2,264.96 =) 5,116.25
TOTAL
Add CPOH @ 15% except on A i.e on
(7,432.37 - 2,264.96 =) 5,167.41
Cost of 1 cum
Say
6.10
Code
2602
3.8
2201
9999
5.9.9
9999
0123
0124
0115
0101
0115
Amount
7381.21
51.16
7432.37
775.11
8207.48
8207.50
Brick work in gauged arches in superstructure above plinth level and upto floor five
level in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and
shuttering complete, for span up to 6 meters with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5.
Description
Unit
254
Quantity
Rate
Amount
538.00
4800.00
2582.40
0.25
538.00
2.73
4347.70
284.39
1.70
1086.92
153.00
4.64
2.25
1006.65 2264.96 A
18.85
1.70
32.04
1.13
1.13
4.42
0.20
393.00
361.00
297.00
328.00
444.09
407.93
1312.74
65.60
1.13
297.00
335.61
8689.93
64.25
8754.18
973.38
9727.56
9727.55
6.11
Code
1197
2204
1225
1034
2302
0112
Extra for additional cost of centering for arches exceeding 6m span including all
shuttering, bolting, wedging and removal (Area of the soffit to be measured).
Description
Unit
255
Quantity
Rate
Amount
887.90
0.8879
260.00
121.88
23085.40
108.22
0.0878
4450.00
390.71
0.08
5600.00
448.00
0.0168
94.80
1.59
28.00
361.00
10108.00
Code
0114
9999
5.9.9
Description
Beldar
Sundries
Less cost of shttering etc. for an arch
exceeding 6m span i.e. for an average of 8 m
span
Rate as per Item Number 5.9.9 of SH:
Reinforced cement concrete work
TOTAL
Add Water Charges @ 1% except on A i.e on
[7,967.15 - (-33,531.51)] = 41,498.66
TOTAL
Add CPOH @ 15% except on A i.e on
[8,382.14 - (-33,531.51)] = 41,913.65
Cost of 33.31 sqm
Cost of 1 sqm
Say
Unit
Quantity
day
L.S.
24.00
134.55
sqm
-33.31
Rate
297.00
1.70
Amount
7128.00
228.74
1006.65 33531.51 A
7967.15
414.99
8382.14
6287.05
14669.19
440.38
440.40
6.12
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundations and plinth in.
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand).
Code
2602
3.8
2201
9999
0123
0124
0115
0101
Description
Details of cost for 10 sqm.
MATERIAL:
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
Cement mortar 1:3
Rate as per Item Number 3.8 of SH: Mortars
Carriage of bricks
Sundries & scaffolding
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
1000 Nos
565.00
4800.00
2712.00
cum
1000 Nos
L.S.
0.28
565.00
13.52
4347.70
284.39
1.70
1217.36
160.68
22.98
0.45
0.45
1.55
0.70
393.00
361.00
297.00
328.00
176.85
162.45
460.35
229.60
5142.27
51.42
5193.69
779.05
5972.74
597.27
597.25
day
day
day
day
Rate
Amount
2602
Description
Details of cost for 10 sqm.
MATERIAL:
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
Cement mortar 1:4
256
Unit
Quantity
1000 Nos
565.00
Rate
4800.00
Amount
2712.00
Code
3.9
2201
9999
0123
0124
0115
0101
6.13
Description
Unit
cum
1000 Nos
L.S.
day
day
day
day
Quantity
Rate
Amount
0.28
565.00
13.52
3654.15
284.39
1.70
1023.16
160.68
22.98
0.45
0.45
1.55
0.70
393.00
361.00
297.00
328.00
176.85
162.45
460.35
229.60
4948.07
49.48
4997.55
749.63
5747.18
574.72
574.70
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.
2602
3.8
2201
9999
0123
0124
0115
0101
0115
Description
Unit
Quantity
Rate
Amount
1000 Nos
565.00
4800.00
2712.00
cum
1000 Nos
L.S.
0.28
565.00
13.52
4347.70
284.39
1.70
1217.36
160.68
22.98
day
day
0.60
0.60
393.00
361.00
235.80
216.60
day
day
day
2.00
0.70
1.29
297.00
328.00
297.00
594.00
229.60
383.13
5772.15
57.72
5829.87
874.48
6704.35
670.44
670.45
2602
Description
Details of cost for 10 sqm.
MATERIAL:
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
Cement mortar 1:4
257
Unit
Quantity
1000 Nos
565.00
Rate
4800.00
Amount
2712.00
Code
3.9
2201
9999
0123
0124
0115
0101
0115
6.14
Code
0037
1235
6.15
Code
1002
2205
9999
Description
Unit
cum
1000 Nos
L.S.
Quantity
Rate
Amount
0.28
565.00
13.52
3654.15
284.39
1.70
1023.16
160.68
22.98
day
day
day
day
0.60
0.60
2.00
0.70
393.00
361.00
297.00
328.00
235.80
216.60
594.00
229.60
day
1.29
297.00
383.13
5577.95
55.78
5633.73
845.06
6478.79
647.88
647.90
Extra for half brick masonry in superstructure, above floor V level for every four
floors or part thereof by mechanical means.
Description
Details of cost for 59.83 sqm per four floors.
Mobile crane
Fuel consumption per hour = 8 litre
Diesel oil
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 59.83 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
0.125
6500.00
812.50
litre
8.00
48.63
389.04
1201.54
12.02
1213.56
182.03
1395.59
23.33
23.35
Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third
course of half brick masonry.
Description
Unit
258
quintal
tonne
L.S.
Quantity
0.132
0.0132
1.82
Rate
4500.00
94.80
1.70
Amount
594.00
1.25
3.09
598.34
5.98
604.32
90.65
694.97
69.50
69.50
6.16
Tile brick masonry with common burnt clay tile bricks of class designation 10 in
foundation and plinth in.
1984
3.9
2207
9999
0123
0124
0115
0101
Description
Unit
Quantity
Rate
Amount
1000 Nos
777.00
4800.00
3729.60
cum
1000 Nos
L.S.
0.40
777.00
4.55
3654.15
170.63
1.70
1461.66
132.58
7.74
0.70
0.70
1.54
0.20
393.00
361.00
297.00
328.00
275.10
252.70
457.38
65.60
6382.36
63.82
6446.18
966.93
7413.11
7413.10
day
day
day
day
1984
3.11
2207
9999
0123
0124
0115
0101
Description
Unit
259
Quantity
Rate
Amount
1000 Nos
777.00
4800.00
3729.60
cum
1000 Nos
L.S.
0.40
777.00
4.55
2960.65
170.63
1.70
1184.26
132.58
7.74
0.70
0.70
1.54
0.20
393.00
361.00
297.00
328.00
275.10
252.70
457.38
65.60
6104.96
61.05
6166.01
924.90
7090.91
7090.90
day
day
day
day
6.17
Code
7904
2207
3.11
9999
0123
0124
0115
0101
6.18
Code
1984
2207
3.11
9999
0123
0124
0115
0101
0115
9999
Tile brick masonry with common burnt clay machine moulded tile bricks of class
designation 12.5 conforming to IS : 2690 (Part I) in foundation and plinth in cement
mortar 1:6 (1 cement : 6 coarse sand).
Description
Details of cost for 1 cum.
MATERIAL:
Machine moulded common burnt clay tile
bricks of class designation 12.5
Carriage of brick tiles
Cement mortar 1:6
Rate as per Item Number 3.11 of SH: Mortars
Sundries
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
1000 Nos
777.00
5000.00
3885.00
1000 Nos
777.00
170.63
132.58
cum
L.S.
0.40
4.55
2960.65
1.70
1184.26
7.74
day
day
day
day
0.70
0.70
1.54
0.20
393.00
361.00
297.00
328.00
275.10
252.70
457.38
65.60
6260.36
62.60
6322.96
948.44
7271.40
7271.40
Tile brick masonry with common burnt clay tile bricks of class designation 10 in
superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement
: 6 coarse sand).
Description
Unit
260
Quantity
Rate
Amount
777.00
4800.00
3729.60
777.00
170.63
132.58
0.40
4.55
2960.65
1.70
1184.26
7.74
0.90
0.90
1.80
0.20
393.00
361.00
297.00
328.00
353.70
324.90
534.60
65.60
1.13
33.80
297.00
1.70
335.61
57.46
6726.05
67.26
6793.31
1019.00
7812.31
7812.30
6.19
Deleted
6.20
Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class
designation 10 in plain arch work in superstructure above plinth and upto floor five
level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and
shuttering complete.
Code
1984
2207
3.9
9999
5.9.9
9999
0123
0124
0115
0101
0115
6.21
Code
1984
2207
3.9
9999
Description
Unit
Quantity
Rate
Amount
777.00
4800.00
3729.60
777.00
170.63
132.58
0.35
5.46
3654.15
1.70
1278.95
9.28
2.25
1006.65 2264.96 A
18.85
1.70
32.04
0.79
0.79
3.21
0.20
393.00
361.00
297.00
328.00
310.47
285.19
953.37
65.60
1.13
297.00
335.61
9397.65
71.33
9468.98
1080.60
10549.58
10549.60
Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class
designation 10 in gauged arch work in superstructure above plinth and upto floor
five level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and
shuttering complete.
Description
Details of cost for 1 cum.
MATERIAL:
Common burnt clay F.P.S. bricks tile class
designation 10
Carriage of brick tiles
Cement mortar 1:4
Rate as per Item Number 3.9 of SH: Mortars
Sundries and shuttering
Centering and shuttering
Area same as in item no 6.9
261
Unit
Quantity
1000 Nos
791.00
4800.00
3796.80
1000 Nos
791.00
170.63
134.97
0.35
5.46
3654.15
1.70
1278.95
9.28
cum
L.S.
Rate
Amount
Code
5.9.9
9999
0123
0124
0115
0101
0115
6.22
Code
1984
2207
3.8
9999
0123
0124
0115
0101
0115
Description
Rate as per Item Number 5.9.9 of SH:
Reinforced cement concrete work
Scaffolding
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Extra labour for lifting of material ( Above floor
two level upto floor five level)
Coolie
TOTAL
Add Water Charges @ 1% except on A i.e on
(10,632.22 - 2,264.96 =) 8,367.26
TOTAL
Add CPOH @ 15% except on A i.e on
(10,715.89 - 2,264.96 =) 8,450.93
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
sqm
2.25
1006.65
2264.96 A
L.S.
18.85
1.70
32.04
day
day
day
day
1.50
1.50
5.33
0.20
393.00
361.00
297.00
328.00
589.50
541.50
1583.01
65.60
day
1.13
297.00
335.61
10632.22
83.67
10715.89
1267.64
11983.53
11983.55
Tile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular) tile
bricks of class designation 10 in cement mortar 1:3 (1 cement : 3 coarse sand) in
superstructure above plinth and upto floor five level.
Description
Unit
262
Quantity
Rate
Amount
377.00
4800.00
1809.60
377.00
170.63
64.33
0.15
8.06
4347.70
1.70
652.16
13.70
0.94
0.94
1.88
0.33
393.00
361.00
297.00
328.00
369.42
339.34
558.36
108.24
1.29
297.00
383.13
4298.28
42.98
4341.26
651.19
4992.45
499.25
499.25
6.23
Code
6.4.1
9999
6.24
Code
0011
0114
Honey-comb brick work 10/11.4 cm thick with common burnt clay bricks of class
designation 7.5 in super structure above plinth level upto floor V level with cement
mortar 1:4 (1 cement : 4 coarse sand).
Description
Details of cost for 1sqm of Honey comb
brick work.
MATERIAL:
Brick work with bricks of class designation 75 in
cement mortar 1:4 (1 Cement: 4 Coarse sand) in
superstructure
1 m x 1 x 0.143 m x 4.5/7.5 = 0.069 cum
Rate as per Item Number 6.4.1 of SH: Brick
work
Extra for delay due to fine work
TOTAL
Add Water Charges @ 1% except on A i.e on
(416.47 - 381.33 =) 35.14
TOTAL
Add CPOH @ 15% except on A i.e on (416.82 381.33 =) 35.49
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.069
5526.50
381.33 A
L.S.
20.67
1.70
35.14
416.47
0.35
416.82
5.32
422.14
422.15
Extra for laying brick work in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush etc. complete.
Note:- The quantity will be calculated by multiplying the depth measured from subsoil water level upto the centre of gravity of brick work unnder sub-soil water with
the quantity of brick work in cum executed under the sub-soil water. The depth of
centre of gravity shall be reconed correct to 0.1 m. 0.05 m or more shall be taken as
0.1 m and less than 0.05 m ignored.
Description
Details of cost for 14 cum per 0.3m depth.
Quantity of concrete = 14 cum.
Pumping hours = 3 hrs. or 0.375 days
Hire charges of Pump set of capacity 4000
litres/hour
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 4.2 cum
cum/mtr depth
Say
263
Unit
Quantity
Rate
Amount
day
0.375
550.00
206.25
day
4.00
297.00
1188.00
1394.25
13.94
1408.19
211.23
1619.42
385.58
385.60
6.25
Code
0123
0124
0114
0115
Unit
Quantity
day
day
day
day
0.02
0.02
0.25
0.15
Rate
393.00
361.00
297.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
6.26
Amount
7.86
7.22
74.25
44.55
133.88
1.34
135.22
20.28
155.50
155.50
Brick work with common burnt clay selected F.P.S (non modular) bricks of class
designation 7.5 in exposed brick work including making horizontal and vertical
grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse
sand).
0114
0123
0124
0115
0101
Description
Details of cost for 1 cum.
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
Carriage of bricks
Cement mortar 1:6
Rate as per Item Number 3.11 of SH:
Mortars
Sundries including steel / wooden strips for
making grooves
LABOUR:
For selection of bricks
Beldar
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
1000 Nos
494.00
4800.00
2371.20
1000 Nos
494.00
284.39
140.49
cum
0.25
2960.65
740.16
L.S.
16.38
1.70
27.85
day
day
day
day
day
0.50
0.35
0.35
1.07
0.20
297.00
393.00
361.00
297.00
328.00
148.50
137.55
126.35
317.79
65.60
4075.49
40.75
4116.24
617.44
4733.68
4733.70
Unit
Quantity
1000 Nos
494.00
Description
Details of cost for 1 cum.
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
264
Rate
4800.00
Amount
2371.20
Code
2201
3.11
9999
0114
0123
0124
0115
0101
0115
9999
6.27
Description
Unit
Carriage of bricks
1000 Nos
Cement Mortar 1:6 (1 cement : 6 coarse sand)
Rate as per Item Number 3.11 of SH: Mortars
cum
Sundries including steel / wooden strips for
L.S.
making grooves
LABOUR:
For selection of bricks in superstructure
Beldar
day
Mason (brick layer) 1 st class
day
Mason (brick layer) 2nd class
day
Coolie
day
Bhisti
day
Extra labour element required for lifting of
material (above floor two level upto floor five
level)
Coolie
day
Sundries
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Quantity
Rate
Amount
494.00
284.39
140.49
0.25
16.38
2960.65
1.70
740.16
27.85
0.50
0.46
0.46
1.60
0.20
297.00
393.00
361.00
297.00
328.00
148.50
180.78
166.06
475.20
65.60
1.13
22.36
297.00
1.70
335.61
38.01
4689.46
46.89
4736.35
710.45
5446.80
5446.80
Brick work with common burnt clay modular bricks of class designation 7.5 in
exposed brick work including making horizontal and vertical grooves 10mm wide
12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
7900
2201
3.11
9999
0123
0124
0115
0101
Description
Unit
265
Quantity
Rate
Amount
487.00
4500.00
2191.50
487.00
284.39
138.50
0.22
16.38
2960.65
1.70
651.34
27.85
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
3614.05
36.14
3650.19
547.53
4197.72
4197.70
7900
2201
3.11
9999
0123
0124
0115
0101
0115
9999
6.28
Description
Unit
Quantity
Rate
Amount
487.00
4500.00
2191.50
487.00
284.39
138.50
0.22
16.38
2960.65
1.70
651.34
27.85
0.44
0.44
1.43
0.18
393.00
361.00
297.00
328.00
172.92
158.84
424.71
59.04
1.13
22.36
297.00
1.70
335.61
38.01
4198.32
41.98
4240.30
636.04
4876.34
4876.35
Brick work with common burnt clay machine moulded modular bricks of class
designation 12.5 in exposed brick work including making horizontal and vertical grooves
10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).
Description
Unit
266
Quantity
Rate
Amount
487.00
5250.00
2556.75
487.00
284.39
138.50
0.22
16.38
2960.65
1.70
651.34
27.85
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
3979.30
39.79
4019.09
602.86
4621.95
4621.95
1986
2201
3.11
9999
0123
0124
0115
0101
0115
9999
6.29
Description
Unit
Quantity
Rate
Amount
487.00
5250.00
2556.75
487.00
284.39
138.50
0.22
16.38
2960.65
1.70
651.34
27.85
0.44
0.44
1.43
0.18
393.00
361.00
297.00
328.00
172.92
158.84
424.71
59.04
1.13
22.36
297.00
1.70
335.61
38.01
4563.57
45.64
4609.21
691.38
5300.59
5300.60
Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks
of class designation 12.5 in exposed brick work including making horizontal and
vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement
: 6 coarse sand).
7903
2201
3.11
9999
0123
0124
0115
0101
Description
Unit
267
Quantity
Rate
Amount
494.00
4500.00
2223.00
494.00
284.39
140.49
0.25
16.38
2960.65
1.70
740.16
27.85
0.36
0.36
1.37
0.20
393.00
361.00
297.00
328.00
141.48
129.96
406.89
65.60
3875.43
38.75
3914.18
587.13
4501.31
4501.30
7903
2201
3.11
9999
0123
0124
0115
0101
0115
9999
6.30
Description
Unit
Quantity
Rate
Amount
494.00
4500.00
2223.00
494.00
284.39
140.49
0.25
16.38
2960.65
1.70
740.16
27.85
0.44
0.44
1.80
0.20
393.00
361.00
297.00
328.00
172.92
158.84
534.60
65.60
1.13
22.36
297.00
1.70
335.61
38.01
4437.08
44.37
4481.45
672.22
5153.67
5153.65
Brick work with common burnt clay machine moulded perforated F.P.S. (non modular)
bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including
making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement
mortar 1:6 (1 cement : 6 coarse sand).
7901
2201
3.11
9999
0123
0124
0115
Description
Unit
268
Quantity
Rate
Amount
1000 Nos
494.00
4600.00
2272.40
1000 Nos
494.00
284.39
140.49
cum
L.S.
0.25
16.38
2960.65
1.70
740.16
27.85
day
day
day
0.36
0.36
1.37
393.00
361.00
297.00
141.48
129.96
406.89
Code
0101
Description
Bhisti
Unit
Quantity
Rate
day
0.20
Unit
Quantity
1000 Nos
494.00
4600.00
2272.40
1000 Nos
494.00
284.39
140.49
cum
L.S.
0.25
16.38
2960.65
1.70
740.16
27.85
day
day
day
day
0.47
0.47
1.80
0.20
393.00
361.00
297.00
328.00
184.71
169.67
534.60
65.60
day
L.S.
1.13
22.36
297.00
1.70
335.61
38.01
4509.10
45.09
4554.19
683.13
5237.32
5237.30
328.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Amount
65.60
3924.83
39.25
3964.08
594.61
4558.69
4558.70
7901
2201
3.11
9999
0123
0124
0115
0101
0115
9999
6.31
Description
Details of cost for 1 cum.
MATERIAL:
Machine moulded perforated common burnt
clay FPS (non modular) bricks of class
designation 12.5
Carriage of bricks
Cement Mortar 1:6 (1 cement : 6 coarse sand)
Rate as per Item Number 3.11 of SH: Mortars
Sundries including steel / wooden strips for
making grooves
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Extra labour element required for lifting of
material (above floor two level upto floor five
level)
Coolie
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Rate
Amount
Brick work with common burnt clay machine moulded perforated modular bricks of
class designation 12.5 conforming to IS : 2222 in exposed brick work including making
horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar
1:6 (1 cement : 6 coarse sand).
7902
2201
Description
Unit
269
Quantity
Rate
Amount
1000 Nos
487.00
4600.00
2240.20
1000 Nos
487.00
284.39
138.50
Code
3.11
9999
0123
0124
0115
0101
Description
Rate as per Item Number 3.11 of SH: Mortars
Sundries including steel / wooden strips for
making grooves
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
L.S.
0.22
16.38
2960.65
1.70
651.34
27.85
day
day
day
day
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
3662.75
36.63
3699.38
554.91
4254.29
4254.30
Unit
Quantity
7902
2201
3.11
9999
0123
0124
0115
0101
0115
9999
6.32
Description
Rate
Amount
487.00
4600.00
2240.20
487.00
284.39
138.50
0.22
16.38
2960.65
1.70
651.34
27.85
0.44
0.44
1.43
0.18
393.00
361.00
297.00
328.00
172.92
158.84
424.71
59.04
1.13
22.36
297.00
1.70
335.61
38.01
4247.02
42.47
4289.49
643.42
4932.91
4932.90
Brick work with clay flyash F.P.S. (non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor five level in.
7008
Description
Details of cost for 1 cum.
MATERIAL:
F.P.S. (non modular) clay fly ash bricks
class designation 7.5
270
Unit
Quantity
1000 Nos
494.00
Rate
4600.00
Amount
2272.40
Code
3.9
2201
9999
0123
0124
0115
0101
9999
0115
Description
Unit
Quantity
Rate
Amount
0.25
494.00
2.73
3654.15
284.39
1.70
913.54
140.49
4.64
0.47
0.47
1.80
0.20
8.97
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
15.25
1.13
297.00
335.61
4636.51
46.37
4682.88
702.43
5385.31
5385.30
7008
3.11
2201
9999
0123
0124
0115
0101
9999
0115
Description
Unit
271
Quantity
Rate
Amount
494.00
4600.00
2272.40
0.25
494.00
2.73
2960.65
284.39
1.70
740.16
140.49
4.64
0.47
0.47
1.80
0.20
8.97
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
15.25
1.13
297.00
335.61
4463.13
44.63
4507.76
676.16
5183.92
5183.90
6.34
Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to
IS:12894, class designation 10 average compressive strength in super structure above
plinth level up to floor V level in.
7737
3.9
2201
9999
0123
0124
0115
0101
9999
0115
Description
Unit
Quantity
Rate
Amount
487.00
4700.00
2288.90
0.22
487.00
2.73
3654.15
284.39
1.70
803.91
138.50
4.64
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
1.13
297.00
335.61
4564.15
45.64
4609.79
691.47
5301.26
5301.25
7737
3.11
2201
9999
0123
0124
0115
0101
9999
Description
Unit
272
Quantity
Rate
Amount
487.00
4700.00
2288.90
0.22
487.00
2.73
2960.65
284.39
1.70
651.34
138.50
4.64
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
Code
0115
Description
Coolie
Unit
Quantity
day
1.13
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
6.35
Amount
335.61
4411.58
44.12
4455.70
668.35
5124.05
5124.05
Brick work with modular calcium silicate bricks machine moulded conforming to
IS:4139, class designation 10 average compressive strength in super structure above
plinth level up to floor V level in.
7738
3.9
2201
9999
0123
0124
0115
0101
9999
0115
Description
Unit
Quantity
Rate
Amount
487.00
5000.00
2435.00
0.22
487.00
2.73
3654.15
284.39
1.70
803.91
138.50
4.64
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
1.13
297.00
335.61
4710.25
47.10
4757.35
713.60
5470.95
5470.95
7738
3.11
2201
9999
Description
Unit
273
Quantity
Rate
Amount
1000 Nos
487.00
5000.00
2435.00
cum
1000 Nos
L.S.
0.22
487.00
2.73
2960.65
284.39
1.70
651.34
138.50
4.64
Code
0123
0124
0115
0101
9999
0115
6.36
Description
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding
Extra labour element required for lifting of
materials above floor two level upto floor V level
(0.75 x 1.5 = 1.13)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
L.S.
0.47
0.47
1.80
0.20
22.36
393.00
361.00
297.00
328.00
1.70
184.71
169.67
534.60
65.60
38.01
day
1.13
297.00
335.61
4557.68
45.58
4603.26
690.49
5293.75
5293.75
Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to
IS: 4885 ) in foundation and plinth.
7736
3.9
2201
9999
0123
0124
0115
0101
6.37
Code
7736
3.3
Description
Unit
Quantity
Rate
Amount
487.00
5400.00
2629.80
0.22
487.00
2.73
3654.15
284.39
1.70
803.91
138.50
4.64
0.33
0.33
1.00
0.18
393.00
361.00
297.00
328.00
129.69
119.13
297.00
59.04
4181.71
41.82
4223.53
633.53
4857.06
4857.05
Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to IS :
4885) in arches in foundation and plinth in cement mortar 1:3 ( 1 cement : 3 fine sand).
Description
Unit
274
1000 Nos
cum
Quantity
Rate
Amount
487.00
5400.00
2629.80
0.25
3844.80
961.20
Code
2201
9999
5.9.9
0123
0124
0115
0101
6.38
Code
8655
3.9
2208
9999
0123
0124
0115
0101
5.22.1
Description
Unit
Carriage of bricks
Sundries
Centering and shuttering
Rate as per Item Number 5.9.9 of SH:
Reinforced cement concrete work
LABOUR:
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Coolie
Bhisti
TOTAL
Add Water Charges @ 1% except on A i.e on
(6,933.80 - 2,264.96 =) 4,668.84
TOTAL
Add CPOH @ 15% except on A i.e on
(6,980.49 - 2,264.96 =) 4,715.53
Cost of 1 cum
Say
1000 Nos
L.S.
Quantity
Rate
Amount
487.00
2.73
284.39
1.70
138.50
4.64
sqm
2.25
1006.65
2264.96 A
day
day
day
day
0.42
0.42
1.86
0.20
393.00
361.00
297.00
328.00
165.06
151.62
552.42
65.60
6933.80
46.69
6980.49
707.33
7687.82
7687.80
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick
AAC blocks in super structure above plinth level up to floor V level in cement mortar
1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2
Nos 6 mm dia M.S. bars at every third course of masonry work.
Description
Unit
275
Quantity
Rate
Amount
1.00
2025.00
2025.00
0.15
3654.15
548.12
1.00
2.73
106.64
1.70
106.64
4.64
0.36
0.36
1.37
0.20
393.00
361.00
297.00
328.00
141.48
129.96
406.89
65.60
13.20
64.05
845.46 A
4273.79
34.28
4308.07
519.39
4827.46
4827.45
6.40
Code
8656
8657
9999
0123
0114
6.41
Code
0115
6.44
Code
9999
Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum
panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue
and groove, jointed with bonding plaster as per manufacturers specifications in
superstructure above plinth level up to floor V level. Gypsum blocks will have a
minimum compressive strength of 9.3 kg/cm2.
Description
Details of cost for 10 sqm.
MATERIAL:
Gypsum panel 666 X 500 X 100 mm size
Bonding plaster for Gypsum panel
Sundries & scaffolding
LABOUR:
Mason (brick layer) 1 st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
kg
L.S.
10.00
25.00
13.52
480.00
55.00
1.70
4800.00
1375.00
22.98
day
day
0.50
1.00
393.00
297.00
196.50
297.00
6691.48
66.91
6758.39
1013.76
7772.15
777.22
777.20
Extra for Gypsum panel partitions in superstructure above floor V level for every
four floors or part thereof.
Description
Details of cost for 10 sqm. per four floors
Extra labour for lifting of materials above floor
V level
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
day
1.73
Rate
297.00
Amount
513.81
513.81
5.14
518.95
77.84
596.79
59.68
59.70
Brick edging 7 cm wide 11.4 cm deep to plinth protection with common burnt clay
F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement
mortar 1:4 (1 cement : 4 fine sand).
Description
Unit
L.S.
276
Quantity
2.73
Rate
1.70
Amount
4.64
Code
2602
2201
3.4
0155
0114
0101
9999
6.45
Description
Unit
Quantity
Rate
Amount
46.00
4800.00
220.80
46.00
284.39
13.08
0.0036
3151.25
11.34
0.10
0.10
0.03
2.73
377.00
297.00
328.00
1.70
37.70
29.70
9.84
4.64
331.74
3.32
335.06
50.26
385.32
38.53
38.55
Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of
class designation 10, conforming to IS : 12894, in super structure above plinth and
upto floor V level.
7737
3.8
2201
9999
0123
0124
0115
0101
0115
Description
Unit
277
Quantity
Rate
Amount
565.00
4700.00
2655.50
0.28
565.00
13.52
4347.70
284.39
1.70
1217.36
160.68
22.98
0.60
0.60
2.00
0.70
393.00
361.00
297.00
328.00
235.80
216.60
594.00
229.60
1.29
297.00
383.13
5715.65
57.16
5772.81
865.92
6638.73
663.87
663.85
7737
3.9
2201
9999
0123
0124
0115
0101
0115
Description
Unit
278
Quantity
Rate
Amount
565.00
4700.00
2655.50
0.28
565.00
13.52
3654.15
284.39
1.70
1023.16
160.68
22.98
0.60
0.60
2.00
0.70
393.00
361.00
297.00
328.00
235.80
216.60
594.00
229.60
1.29
297.00
383.13
5521.45
55.21
5576.66
836.50
6413.16
641.32
641.30
STONE WORK
279
7.1
Random rubble masonry with hard stone in foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate
20 mm nominal size) upto plinth level with.
7.1.1
Code
1157
1154
2215
3.11
0125
0114
0115
0101
9999
9999
Description
Unit
Quantity
Rate
Amount
cum
100 Nos
1.00
7.00
700.00
1200.00
700.00
84.00
cum
1.16
125.47
145.55
cum
0.33
2960.65
977.01
day
day
day
day
L.S.
L.S.
1.07
1.07
0.71
0.09
45.76
4.42
361.00
297.00
297.00
328.00
1.70
1.70
386.27
317.79
210.87
29.52
77.79
7.51
2936.31
29.36
2965.67
444.85
3410.52
3410.50
7.2
Random rubble masonry with hard stone in superstructure above plinth level and
upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling
level and the like.
7.2.1
Code
1157
1154
2215
3.11
0125
0114
0115
0101
9999
Description
Unit
281
Quantity
Rate
Amount
cum
100 Nos
cum
1.00
7.00
1.16
700.00
1200.00
125.47
700.00
84.00
145.55
cum
0.33
2960.65
977.01
day
day
day
day
L.S.
1.34
1.45
0.71
0.09
56.55
361.00
297.00
297.00
328.00
1.70
483.74
430.65
210.87
29.52
96.14
Code
0115
9999
Description
Extra Labour for lifting of material upto floor
five level.
Coolie
Sundries, scaffolding etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
day
L.S.
1.13
15.21
7.4
7.4.1
Code
0125
0115
7.4.2
Code
1157
2215
0125
0115
7.5
Code
1157
2215
Description
Details of cost for 1 cum.
LABOUR:
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Rate
297.00
1.70
Rate
Amount
335.61
25.86
3518.95
35.19
3554.14
533.12
4087.26
4087.25
Unit
Quantity
day
day
0.58
0.27
Unit
Quantity
cum
cum
0.29
0.29
700.00
125.47
203.00
36.39
day
day
1.42
0.35
361.00
297.00
512.62
103.95
855.96
8.56
864.52
129.68
994.20
994.20
361.00
297.00
Amount
209.38
80.19
289.57
2.90
292.47
43.87
336.34
336.35
Circular pillars.
Description
Details of cost for 1 cum.
Stone for masonry work
Carriage of Soling stone & masonry stone
LABOUR:
Labour for cutting and dressing stones
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Rate
Amount
Extra for random rubble masonry with hard stone curved on plan for a mean radius
not exceeding 6 m.
Description
Unit
Quantity
cum
cum
0.10
0.10
282
Rate
700.00
125.47
Amount
70.00
12.55
Code
0125
0115
Description
LABOUR:
Labour for cutting and dressing stones
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
day
day
0.27
0.53
Rate
361.00
297.00
Amount
97.47
157.41
337.43
3.37
340.80
51.12
391.92
391.90
7.6
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :
7.6.1
Code
3.11
1157
1154
2215
0125
0114
0115
0101
9999
Description
Unit
Quantity
Rate
Amount
cum
cum
100 Nos
cum
0.3
1.21
7.00
1.37
2960.65
700.00
1200.00
125.47
888.20
847.00
84.00
171.89
day
day
day
day
L.S.
2.12
1.24
0.71
0.09
13.52
361.00
297.00
297.00
328.00
1.70
765.32
368.28
210.87
29.52
22.98
3388.06
33.88
3421.94
513.29
3935.23
3935.25
7.7
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with.
7.7.1
Code
3.11
1157
1154
2215
Description
Unit
283
Quantity
Rate
Amount
cum
cum
100 Nos
0.30
1.10
7.00
2960.65
700.00
1200.00
888.20
770.00
84.00
cum
1.26
125.47
158.09
Code
0125
0114
0115
0101
9999
Description
LABOUR:
Mason (for plain stone work) 2nd class
Beldar
Coolie
Bhisti
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
day
day
day
day
L.S.
1.76
1.24
0.71
0.09
13.52
Rate
Amount
361.00
297.00
297.00
328.00
1.70
635.36
368.28
210.87
29.52
22.98
3167.30
31.67
3198.97
479.85
3678.82
3678.80
7.8
Coursed rubble masonry with hard stone (first or second sort) in superstructure
above plinth level and upto floor five level.
7.8.1
Masonry work (first sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand.
Code
3.11
1157
1154
2215
0125
0114
0115
0101
0115
9999
7.8.2
Code
3.11
1157
Description
Unit
Quantity
Rate
Amount
cum
cum
100 Nos
cum
0.30
1.21
7.00
1.37
2960.65
700.00
1200.00
125.47
888.20
847.00
84.00
171.89
day
day
day
day
2.38
1.59
0.71
0.09
361.00
297.00
297.00
328.00
859.18
472.23
210.87
29.52
day
L.S.
1.13
37.70
297.00
1.70
335.61
64.09
3962.59
39.63
4002.22
600.33
4602.55
4602.55
Masonry work (second sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand).
Description
Unit
Quantity
cum
cum
0.30
1.10
284
Rate
2960.65
700.00
Amount
888.20
770.00
Code
1154
2215
0125
0114
0115
0101
0115
9999
7.10
Description
Unit
Quantity
Rate
Amount
100 Nos
cum
7.00
1.26
1200.00
125.47
84.00
158.09
day
day
day
day
2.02
1.59
0.71
0.09
361.00
297.00
297.00
328.00
729.22
472.23
210.87
29.52
day
L.S.
1.13
37.7
297.00
1.70
335.61
64.09
3741.83
37.42
3779.25
566.89
4346.14
4346.15
Extra for coursed rubble masonry with hard stone (first or second sort) in.
0125
0115
Description
Details of cost for 1 cum.
LABOUR:
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
day
day
0.67
0.27
Unit
Quantity
cum
cum
0.32
0.32
700.00
125.47
224.00
40.15
day
day
1.67
0.35
361.00
297.00
602.87
103.95
970.97
9.71
980.68
147.10
1127.78
1127.80
361.00
297.00
Amount
241.87
80.19
322.06
3.22
325.28
48.79
374.07
374.05
1157
2215
0125
0115
Description
Details of cost for 1 cum.
Extra
Stone for masonry work
Carriage of Soling stone & masonry stone
LABOUR:
Labour for cutting and dressing
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
285
Rate
Amount
7.11
Code
1157
2215
0125
0115
7.12
Extra for coursed rubble masonry with hard stone (first or second sort) curved on
plan for a mean radius not exceeding 6 m.
Description
Details of cost for 1 cum.
Extra
Stone for masonry work
Carriage of Soling stone & masonry stone
LABOUR:
Labour for cutting and dressing
Mason (for plain stone work) 2nd class
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
cum
0.11
0.11
700.00
125.47
77.00
13.80
day
day
0.33
0.53
361.00
297.00
119.13
157.41
367.34
3.67
371.01
55.65
426.66
426.65
Stone work in plain ashlar in super structure upto floor five level in cement mortar
1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment matching the stone shade.
1160
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
Description
Unit
286
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
65.00
94.80
86.65
2.94
day
0.015
297.00
4.46
day
day
day
day
day
0.088
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
31.77
2.36
13.07
6.53
14.43
day
day
day
0.044
0.006
0.022
361.00
393.00
297.00
15.88
2.36
6.53
Code
0115
0100
0101
9999
9999
Description
Unit
Quantity
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
day
day
day
L.S.
L.S.
0.022
0.022
0.022
2.73
8.06
Unit
Quantity
Rate
297.00
328.00
328.00
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Amount
6.53
7.22
7.22
4.64
13.70
226.29
2.26
228.55
34.28
262.83
26283.00
26283.00
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Details of cost for 10 cudm.
MATERIAL:
1161 White sand stone block
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg =
0.031 t
Extra labour for lifting of materials upto floor
V level.
0.01x1.50=0.015
Coolie
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
287
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
0.015
297.00
4.46
day
day
day
day
day
0.088
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
31.77
2.36
13.07
6.53
14.43
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
232.95
2.33
235.28
35.29
270.57
27057.00
27057.00
7.12.2
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
13.33
65.00
86.65
tonne
0.031
94.80
2.94
day
0.015
297.00
4.46
day
day
day
day
day
0.176
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
63.54
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
294.46
2.94
297.40
44.61
342.01
34201.00
34201.00
Unit
Quantity
1161
2216
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
White sand stone block
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
288
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
Code
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
7.13
Description
@ 2.30kg/cudm = 13.33x2.30 = 30.659 kg =
0.031 t
Extra labour for lifting of material upto floor
V level 0.01x1.50 = 0.015
Coolie
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
0.015
297.00
4.46
day
day
day
day
day
0.176
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
63.54
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
301.12
3.01
304.13
45.62
349.75
34975.00
34975.00
Stone work plain ashlar in arches in superstructure upto floor V level in cement
morter 1 : 3 (1 cement : 3 coarse sand) including centring, shuttering and pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade.
1160
2216
0125
Description
Unit
289
Quantity
Rate
Amount
10 cudm
13.33
65.00
86.65
tonne
0.031
94.80
2.94
day
0.088
361.00
31.77
Code
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
0115
Description
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
0.006
0.044
0.022
0.044
393.00
297.00
297.00
328.00
2.36
13.07
6.53
14.43
day
day
day
day
day
day
L.S.
L.S
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
. 8.06
13.52
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
22.98
13.70
day
0.015
297.00
4.46
262.97
2.63
265.60
39.84
305.44
30544.00
30544.00
Unit
Quantity
1161
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
White sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sande
ston & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
290
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
day
day
day
day
0.088
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
31.77
2.36
13.07
6.53
14.43
day
day
day
day
0.044
0.006
0.022
0.022
361.00
393.00
297.00
297.00
15.88
2.36
6.53
6.53
Code
0100
0101
9999
9999
9999
9999
0115
Description
Unit
Quantity
Rate
Amount
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
day
day
L.S.
L.S.
L.S.
L.S.
0.022
0.022
2.73
8.06
13.52
8.06
328.00
328.00
1.70
1.70
1.70
1.70
7.22
7.22
4.64
13.70
22.98
13.70
day
0.015
297.00
4.46
269.63
2.70
272.33
40.85
313.18
31318.00
31318.00
Unit
Quantity
1160
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
Red sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
291
Rate
Amount
10 cudm
13.33
65.00
86.65
tonne
0.031
94.80
2.94
day
day
day
day
day
0.176
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
63.54
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
13.52
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
22.98
13.70
Code
0115
Description
Coolie
Unit
Quantity
day
0.015
Unit
Quantity
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Amount
4.46
331.14
3.31
334.45
50.17
384.62
38462.00
38462.00
1161
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
0115
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
White sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
292
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
day
day
day
day
0.176
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
63.54
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
13.52
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
22.98
13.70
day
0.015
297.00
4.46
337.80
3.38
341.18
51.18
392.36
39236.00
39236.00
7.14
Stone work plain ashlar in domes, in super structure upto floor V level in cement
mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing
with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of
pigment matching the stone shade.
1160
2216
0125
0102
0126
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
0115
Description
Unit
293
Quantity
Rate
Amount
13.33
65.00
86.65
0.031
94.80
2.94
0.176
0.006
0.176
0.044
0.022
0.044
361.00
393.00
393.00
297.00
297.00
328.00
63.54
2.36
69.17
13.07
6.53
14.43
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
56.36
13.70
0.015
297.00
4.46
397.29
3.97
401.26
60.19
461.45
46145.00
46145.00
1161
2216
0125
0102
0126
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
day
day
day
day
day
0.176
0.006
0.176
0.044
0.022
0.044
361.00
393.00
393.00
297.00
297.00
328.00
63.54
2.36
69.17
13.07
6.53
14.43
day
day
day
day
day
day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
56.36
13.70
day
0.015
297.00
4.46
403.95
4.04
07.99
61.20
469.19
46919.00
46919.00
Unit
Quantity
1160
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
Red sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
294
10 cudm
13.33
Rate
65.00
Amount
86.65
Code
2216
0125
0102
0126
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
0115
Description
Unit
Quantity
Rate
Amount
tonne
0.031
94.80
2.94
day
day
day
day
day
day
0.352
0.012
0.352
0.088
0.044
0.088
361.00
393.00
393.00
297.00
297.00
328.00
127.07
4.72
138.34
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
56.36
13.70
day
0.015
297.00
4.46
566.39
5.66
572.05
85.81
657.86
65786.00
65786.00
Unit
Quantity
1161
2216
0125
0102
0126
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
White sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Mason (for ornamental stone work) 1 st class
295
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
day
day
0.352
0.012
0.352
361.00
393.00
393.00
127.07
4.72
138.34
Code
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
0115
7.15
Description
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
0.088
0.044
0.088
297.00
297.00
328.00
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
56.36
13.70
day
0.015
297.00
4.46
573.05
5.73
578.78
86.82
665.60
66560.00
66560.00
Stone work ashlar punched (ordinary) in superstructure upto floor five level in
cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching
the stone shade.
1160
2216
0125
0102
0114
0115
0100
Description
Unit
296
Quantity
Rate
Amount
10 cudm
13.33
65.00
86.65
tonne
0.031
94.80
2.94
day
day
day
day
day
0.059
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
21.30
2.36
13.07
6.53
14.43
Code
0125
0102
0114
0115
0100
0101
9999
9999
0115
Description
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of materials upto floor
V level= 0.01x1.50 = 0.015
Coolie
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
0.044
0.006
0.022
361.00
393.00
297.00
15.88
2.36
6.53
day
day
day
L.S.
L.S.
0.022
0.022
0.022
2.73
8.06
297.00
328.00
328.00
1.70
1.70
6.53
7.22
7.22
4.64
13.70
day
0.015
297.00
4.46
215.82
2.16
217.98
32.70
250.68
25068.00
25068.00
Unit
Quantity
1161
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
White sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of material upto floor
five level
(0.01x1.5=0.015)
297
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
day
day
day
day
0.059
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
21.30
2.36
13.07
6.53
14.43
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
Code
0115
Description
Coolie
Unit
Quantity
day
0.015
Unit
Quantity
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Amount
4.46
222.48
2.22
224.70
33.70
258.40
25840.00
25840.00
1160
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Details of cost for 10 cudm or 0.01 cum.
MATERIAL:
Red sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm = 13.33x2.30=30.659 kg =
0.031t
Extra labour for lifting of materials upto floor
five level
0.01x1.50=0.015
Coolie
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
298
Rate
Amount
10 cudm
13.33
65.00
86.65
tonne
0.031
94.80
2.94
day
0.015
297.00
4.46
day
day
day
day
day
0.118
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
42.60
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
273.52
2.74
276.26
41.44
317.70
31770.00
31770.00
1161
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
7.16
Code
Description
Unit
Quantity
Rate
Amount
10 cudm
13.33
70.00
93.31
tonne
0.031
94.80
2.94
day
0.015
297.00
4.46
day
day
day
day
day
0.118
0.012
0.088
0.044
0.088
361.00
393.00
297.00
297.00
328.00
42.60
4.72
26.14
13.07
28.86
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
280.18
2.80
282.98
42.45
325.43
32543.00
32543.00
Unit
299
Quantity
Rate
Amount
Code
0114
Description
Beldar
Unit
Quantity
day
0.02
Unit
Quantity
L.S.
8.97
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
7.17
Amount
5.94
5.94
0.06
6.00
0.90
6.90
690.00
690.00
7.18
Code
9999
7.19
Code
Description
Details of cost for 10 cudm or 0.01 cum.
Labour and materials
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Rate
1.70
Amount
15.25
15.25
0.15
15.40
2.31
17.71
1771.00
1771.00
Extra for stone work; plain ashlar or ashlar punched curved on plan with a mean
radius not exceeding 6 m.
Description
Details of cost for 10 cudm or 0.01 cum.
Labour and materials
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
L.S.
6.24
Rate
1.70
Amount
10.61
10.61
0.11
10.72
1.61
12.33
1233.00
1233.00
Extra for additional cost of centering for arches exceeding 6 m span including all
strutting, bolting, wedging etc. and removal (area of soffit to be measured).
Description
Unit
300
Quantity
Rate
Amount
Code
1197
2204
1225
1034
2302
0112
0114
9999
Description
Unit
301
Quantity
Rate
Amount
10 cudm
cum
887.9
0.8879
260.00
121.88
23085.40
108.22
quintal
0.0878
4450.00
390.71
quintal
0.08
5600.00
448.00
tonne
0.0168
94.80
1.59
day
day
L.S.
28.00
24.00
134.55
361.00
297.00
1.70
10108.00
7128.00
228.74
Code
5.9.9
7.20
Description
Unit
sqm
Quantity
-33.31
Rate
1006.65
Amount
-33531.51 A
7967.15
414.99
8382.14
6287.05
14669.19
440.38
440.40
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in
cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching
the stone shade.
1160
2216
9999
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Unit
302
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
65.00
94.80
86.65
2.94
L.S.
8.06
1.70
13.70
day
day
day
day
day
0.291
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
105.05
2.36
13.07
6.53
14.43
day
day
day
day
day
day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
Code
0115
Description
Coolie
Unit
Quantity
day
0.015
Unit
Quantity
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Amount
4.46
313.27
3.13
316.40
47.46
363.86
36386.00
36386.00
1161
2216
9999
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
0115
Description
303
Rate
Amount
13.33
0.031
70.00
94.80
93.31
2.94
8.06
1.70
13.70
0.291
0.006
0.044
0.022
0.044
361.00
393.00
297.00
297.00
328.00
105.05
2.36
13.07
6.53
14.43
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
15.88
2.36
6.53
6.53
7.22
7.22
4.64
13.70
0.015
297.00
4.46
319.93
3.20
323.13
48.47
371.60
37160.00
37160.00
7.21
Extra for stone work ashalr sunk or moulded or sunk and moulded or carved in.
Description
Details of cost for 10 cudm or 0.01 cum.
Labour
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Unit
Quantity
L.S.
11.70
Unit
Quantity
L.S.
33.15
Rate
1.70
Amount
19.89
19.89
0.20
20.09
3.01
23.10
2310.00
2310.00
7.22
Code
0125
0114
7.23
Description
Details of cost for 10 cudm or 0.01 cum.
Labour
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
Rate
1.70
Amount
56.36
56.36
0.56
56.92
8.54
65.46
6546.00
6546.00
Unit
Quantity
day
day
0.50
0.75
Rate
361.00
297.00
Amount
180.50
222.75
403.25
4.03
407.28
61.09
468.37
20.82
20.80
Stone work (machine cut edges) for wall lining etc.(veneer work) upto 10 metre height,
backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3
coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone shade : (To be secured to the
backing and the sides by means of cramps and pins which shall be paid for separately)
7.23.1 Red sand stone - Exposed face fine dressed with rough backing.
304
7.23.1.1 70 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Unit
Quantity
Rate
Amount
10 cudm
tonne
93.33
0.215
65.00
94.80
606.64
20.38
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00 9
297.00
328.00
9.00
161.73
110.21
9.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2075.54
20.76
2096.30
314.44
2410.74
2410.75
Unit
Quantity
7.23.1.2 60 mm thick.
Code
1160
2216
9999
0125
Description
Details of cost for 1 sqm.
Finished work = 60 cudm
Add wastage @ 33.3% = 20 cudm
Total = 80 cudm
Red sand stone block
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm
Extra for using white cement
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
305
Rate
Amount
10 cudm
tonne
80.00
0.184
65.00
94.80
520.00
17.44
L.S.
26.91
1.70
45.75
day
1.35
361.00
487.35
Code
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to 50
mm thick by mechanical device
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH:
Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
day
day
0.032
0.224
0.112
0.224
393.00
297.00
297.00
328.00
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
1985.96
19.86
2005.82
300.87
2306.69
2306.70
7.23.1.3 50 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Unit
306
Quantity
Rate
Amount
10 cudm
tonne
66.7
0.153
65.00
94.80
433.55
14.50
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
Code
3.8
Description
Unit
Quantity
cum
0.018
Unit
Quantity
Rate
4347.70
Amount
78.26
1896.57
18.97
1915.54
287.33
2202.87
2202.85
7.23.1.4 40 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Details of cost for 1 sqm.
MATERIAL:
Finished work = 40 cudm
Add wastage @ 33.3% = 13.33 cudm
Total = 53.33 cudm
Red sand stone block
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm
Extra for using white cement
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to 50
mm thick by mechanical device
Scaffolding
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Rate
Amount
10 cudm
tonne
53.33
0.123
65.00
94.80
346.64
11.66
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
cum
19.76
0.018
1.70
4347.70
33.59
78.26
1806.82
18.07
1824.89
273.73
2098.62
2098.60
Unit
Quantity
7.23.1.5 30 mm thick.
Code
Description
Details of cost for 1 sqm.
MATERIAL:
Finished work = 30 cudm
Add wastage @ 33.3% = 9.99cudm
Total = 39.99 cudm
307
Rate
Amount
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
7.23.2
Description
Unit
Quantity
Rate
Amount
10 cudm
tonne
39.99
0.092
65.00
94.80
259.94
8.72
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
1717.18
17.17
1734.35
260.15
1994.50
1994.50
Red sand stone - Exposed face machine cut and table rubbed with rough backing.
7.23.2.1 70 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
Description
Unit
308
Quantity
Rate
Amount
10 cudm
tonne
93.33
0.215
65.00
94.80
606.64
20.38
L.S.
26.91
1.70
45.75
day
day
day
day
day
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
day
0.448
361.00
161.73
Code
0100
0114
0115
0101
1237
9999
3.8
Description
Unit
Quantity
Rate
Amount
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to
50 mm thick by mechanical device
Scaffolding
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
day
day
day
day
metre
0.336
0.336
0.336
0.336
4.00
328.00
297.00
297.00
328.00
9.00
110.21
99.79
99.79
110.21
36.00
L.S.
cum
19.76
0.018
1.70
4347.70
33.59
78.26
2748.73
27.49
2776.22
416.43
3192.65
3192.65
Unit
Quantity
7.23.2.2 60 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
309
Rate
Amount
80.00
0.184
65.00
94.80
520.00
17.44
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2659.15
26.59
2685.74
402.86
3088.60
3088.60
7.23.2.3 50 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0101
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Unit
Quantity
Rate
Amount
66.70
0.153
65.00
94.80
433.55
14.50
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2569.76
25.70
2595.46
389.32
2984.78
2984.80
7.23.2.4 40 mm thick.
Code
1160
2216
9999
Description
Unit
310
Quantity
Rate
Amount
10 cudm
tonne
53.33
0.123
65.00
94.80
346.64
11.66
L.S.
26.91
1.70
45.75
Code
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to 50 mm
thick by mechanical device
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
day
day
day
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2480.01
24.80
2504.81
375.72
2880.53
2880.55
Unit
Quantity
7.23.2.5 30 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
Description
Details of cost for 1 sqm.
MATERIAL:
Finished work = 30 cudm
Add wastage @ 33.3% = 9.99cudm
Total = 39.99 cudm
Red sand stone block
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm
Extra for using white cement
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to
50 mm thick by mechanical device
311
Rate
Amount
10 cudm
tonne
39.99
0.092
65.00
94.80
259.94
8.72
L.S.
26.91
1.70
45.75
day
day
day
day
day
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
Code
9999
3.8
Description
Unit
Quantity
Rate
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2390.37
23.90
2414.27
362.14
2776.41
2776.40
7.23.3
White sand stone - Exposed face fine dressed with rough backing.
7.23.3.1
70 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Unit
312
Quantity
Rate
Amount
Amount
10 cudm
tonne
93.33
0.215
70.00
94.80
653.31
20.38
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2122.21
21.22
2143.43
321.51
2464.94
2464.95
7.23.3.2
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
7.23.3.3
Code
1161
2216
9999
60 mm thick.
Description
Unit
Quantity
Rate
Amount
80.00
0.184
70.00
94.80
560.00
17.44
26.91
1.70
45.75
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2025.96
20.26
2046.22
306.93
2353.15
2353.15
50 mm thick.
Description
Unit
313
Quantity
Rate
Amount
10 cudm
tonne
66.70
0.153
70.00
94.80
466.90
14.50
L.S.
26.91
1.70
45.75
Code
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to
50 mm thick by mechanical device
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
1929.92
19.30
1949.22
292.38
2241.60
2241.60
Unit
Quantity
7.23.3.4 40 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
Description
314
Rate
Amount
53.30
0.123
70.00
94.80
373.10
11.66
26.91
1.70
45.75
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
Code
9999
3.8
Description
Unit
Quantity
Rate
Amount
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
1833.28
18.33
1851.61
277.74
2129.35
2129.35
Unit
Quantity
7.23.3.5 30 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Details of cost for 1 sqm.
MATERIAL:
Finished work = 30 cudm
Add wastage @ 33.3% = 9.99cudm
Total = 39.99 cudm
White sand stone block
Carriage of stone blocks white & red sand
stone & kota stone slab
@ 2.30kg/cudm
Extra for using white cement
Dressing charges
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to
50 mm thick by mechanical device
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
315
Rate
Amount
10 cudm
tonne
39.99
0.092
70.00
94.80
279.93
8.72
L.S.
26.91
1.70
45.75
day
day
day
day
day
1.35
0.032
0.224
0.112
0.224
361.00
393.00
297.00
297.00
328.00
487.35
12.58
66.53
33.26
73.47
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
1737.17
17.37
1754.54
263.18
2017.72
2017.70
7.23.4
White sand stone - Exposed face machine cut and table rubbed with rough backing.
7.23.4.1 70 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
Unit
Quantity
Rate
Amount
93.33
0.215
70.00
94.80
653.31
20.38
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2795.40
27.95
2823.35
423.50
3246.85
3246.85
7.23.4.2 60 mm thick.
Code
1161
2216
9999
Description
Unit
316
Quantity
Rate
Amount
10 cudm
tonne
80.00
0.184
70.00
94.80
560.00
17.44
L.S.
26.91
1.70
45.75
Code
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
LABOUR:
Mason (for plain stone work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting marble or sand stone slab up to 50
mm thick by mechanical device
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
day
day
day
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
day
day
day
day
day
metre
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2699.15
26.99
2726.14
408.92
3135.06
3135.05
Unit
Quantity
7.23.4.3 50 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
Description
317
Rate
Amount
66.70
0.153
70.00
94.80
466.90
14.50
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
Code
9999
3.8
Description
Unit
Quantity
Rate
Amount
Scaffolding
Mortar for laying and pointing
Rate as per Item Number 3.8 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
L.S.
19.76
1.70
33.59
cum
0.018
4347.70
78.26
2603.11
26.03
2629.14
394.37
3023.51
3023.50
Unit
Quantity
7.23.4.4 40 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
Description
318
Rate
Amount
53.30
0.123 9
70.00
4.80
373.10
11.66
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2506.47
25.06
2531.53
379.73
2911.26
2911.25
7.23.4.5 30 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
3.8
7.24
Code
9999
Description
Unit
Quantity
Rate
Amount
39.99
0.092
70.00
94.80
279.93
8.72
26.91
1.70
45.75
2.70
0.064
0.448
0.224
0.448
361.00
393.00
297.00
297.00
328.00
974.70
25.15
133.06
66.53
146.94
0.448
0.336
0.336
0.336
0.336
4.00
361.00
328.00
297.00
297.00
328.00
9.00
161.73
110.21
99.79
99.79
110.21
36.00
19.76
1.70
33.59
0.018
4347.70
78.26
2410.36
24.10
2434.46
365.17
2799.63
2799.65
Extra for stone work (veneer work) curved on plan with a mean radius not
exceeding 6 m.
Description
Details of cost for 10 cudm.
Labour and materials
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.01 cum
Cost of 1 cum
Say
319
Unit
Quantity
L.S.
8.97
Rate
1.70
Amount
15.25
15.25
0.15
15.40
2.31
17.71
1771.00
1771.00
7.25
Code
7339
9999
3.7
9999
7.26
Code
9999
9999
3.7
Providing and fixing stainless steel cramps of required size and shape for anchoring
stone wall lining to the backing or securing adjacent stones in stone wall lining in
cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases
in stone and holes in walls wherever required.
Description
Unit
Quantity
Rate
Amount
kilogram
L.S.
0.981
3.90
340.00
1.70
333.54
6.63
cum
L.S.
0.001
65.00
5107.40
1.70
5.11
110.50
455.78
4.56
460.34
69.05
529.39
566.80
566.80
Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per
design in cement mortar 1:2 (1 cement : 2 coarse sand) including making the
necessary chases.
Description
Details of cost for one dowel.
Cost of stone including carriage
Labour for dressing dowel cutting chase and
fixing etc.
Cement mortar 1:2(1 cement: 2 coarse sand)
Rate as per Item Number 3.7 of SH: Mortars
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
320
Unit
Quantity
Rate
Amount
L.S.
L.S.
9.10
5.33
1.70
1.70
15.47
9.06
cum
0.001
5107.40
5.11
29.64
0.30
29.94
4.49
34.43
34.45
7.27
Code
0873
9999
3.7
9999
7.28
Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent
stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including
making the necessary chases.
Description
Unit
Quantity
Rate
Amount
each
L.S.
1.00
3.90
10.00
1.70
10.00
6.63
cum
L.S.
0.001
1.95
5107.40
1.70
5.11
3.32
25.06
0.25
25.31
3.80
29.11
29.10
Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond
the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse
sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and
supported on and including with brick cove in cement mortar 1:4 (1 cement : 4 coarse
sand) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone shade.
1164
2216
0125
1002
9999
3.12
9999
9999
Description
Unit
321
Quantity
Rate
Amount
sqm
tonne
2.75
0.253
160.00
94.80
440.00
23.98
day
0.50
361.00
180.50
quintal
L.S.
0.02
67.34
4500.00
1.70
90.00
114.48
cum
L.S.
L.S.
0.009
6.24
26.91
4993.40
1.70
1.70
44.94
10.61
45.75
Code
0125
0114
9999
9999
6.4.1
7.28.2
Description
LABOUR:
Mason (for plain stone work) 2nd class
Beldar
Scaffolding and sundries etc.
Brick cover support 4 courses with bricks of
class designation 75
4x7+5+5=38cm girth 2.5m length
=38cmx2.5m=95cm
Cost of Brick cover support.
Brick work in triangular gap above cover with
bricks of class designation 7.5 in cement
mortar 1:4-1/2x2.5x0.2x0.07=0.018cum
Rate as per Item Number 6.4.1 of SH:
Brick work
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,060.44 - 99.48 =) 1,960.96
TOTAL
Add CPOH @ 15% except on A i.e on
(2,080.05 - 99.48 =) 1,980.57
Cost of 2 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
L.S.
1.00
1.50
16.12
361.00
297.00
1.70
361.00
445.50
27.40
L.S.
104.00
1.70
176.80
cum
0.018
5526.50
99.48 A
2060.44
19.61
2080.05
297.09
2377.14
1188.57
1188.55
7.28.2.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
Code
1165
2216
0125
1002
9999
3.12
9999
9999
0125
0114
Description
Unit
322
Quantity
Rate
Amount
sqm
tonne
2.75
0.253
180.00
94.80
495.00
23.98
day
0.50
361.00
180.50
quintal
L.S.
0.02
67.34
4500.00
1.70
90.00
114.48
cum
L.S.
L.S.
0.009
6.24
26.91
4993.40
1.70
1.70
44.94
10.61
45.75
day
day
1.00
1.50
361.00
297.00
361.00
445.50
Code
9999
9999
6.4.1
7.29
Description
Unit
Quantity
Rate
Amount
L.S.
16.12
1.70
27.40
L.S.
104.00
1.70
176.80
cum
0.018
5526.50
99.48 A
2115.44
20.16
2135.60
305.42
2441.02
1220.51
1220.50
Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection
in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching
the stone shade.
1164
2216
0125
9999
9999
9999
0125
0114
9999
Description
Unit
323
Quantity
Rate
Amount
sqm
tonne
2.25
0.227
160.00
94.80
360.00
21.52
day
L.S.
L.S.
L.S.
0.45
53.82
6.24
26.91
361.00
1.70
1.70
1.70
162.45
91.49
10.61
45.75
day
day
L.S.
0.60
0.80
13.52
361.00
297.00
1.70
216.60
237.60
22.98
1169.00
11.69
1180.69
177.10
1357.79
724.15
724.15
1165
2216
0125
9999
9999
9999
0125
0114
9999
7.30
Code
1166
2216
9999
0125
Description
Unit
Quantity
Rate
Amount
sqm
tonne
2.25
0.227
180.00
94.80
405.00
21.52
day
L.S.
L.S.
L.S.
0.45
53.82
6.24
26.91
361.00
1.70
1.70
1.70
162.45
91.49
10.61
45.75
day
day
L.S.
0.60
0.80
13.52
361.00
297.00
1.70
216.60
237.60
22.98
1214.00
12.14
1226.14
183.92
1410.06
752.03
752.05
Unit
324
Quantity
Rate
Amount
sqm
tonne
2.00
0.14
130.00
94.80
260.00
13.27
L.S.
13.52
1.70
22.98
day
0.86
361.00
310.46
Code
0114
Description
Beldar
Unit
Quantity
day
0.50
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1.12 sqm
Cost of 1 sqm
Say
7.31
Code
1160
2216
0125
0102
0114
0115
0100
0373
0125
0102
0114
0115
0100
0101
9999
9999
0126
Amount
148.50
755.21
7.55
762.76
114.41
877.17
783.19
783.20
Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded
including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long and
dowel bars 7.5 cm long 6mm dia as per design.
Description
Unit
325
10 cudm
tonne
Quantity
Rate
Amount
61.6
0.14
65.00
94.80
400.40
13.27
day
day
day
day
day
each
1.7926
0.037
0.271
0.1355
0.271
4.00
361.00
393.00
297.00
297.00
328.00
80.00
647.13
14.54
80.49
40.24
88.89
320.00
day
day
day
day
day
day
L.S.
L.S.
0.2464
0.0336
0.1232
0.1232
0.1232
0.1232
15.29
45.14
361.00
393.00
297.00
297.00
328.00
328.00
1.70
1.70
88.95
13.20
36.59
36.59
40.41
40.41
25.99
76.74
day
0.95
393.00
373.35
2337.19
23.37
2360.56
354.08
2714.64
2714.65
7.32
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75
mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with
white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade.
7.12.1.1
9999
0125
0114
Description
Details of cost for cornices (30cm long 30cm
deep and 7.5cm project-iron) = 6.75cudm or
0.00675 cum.
MATERIAL:
Stone work plain ashlar cyclopean
3x3x0.75 - 6.75 cudm
Rate as per Item Number 7.12.1.1 of SH:
Stone work
Extra for using white cement
Extra labour for making the cornices
Mason (for plain stone work) 2nd class
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(232.53 - 177.41 =) 55.12
TOTAL
Add CPOH @ 15% except on A i.e on
(233.08 - 177.41 =) 55.67
Cost of 0.00675 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.00675
26283.00
177.41 A
L.S.
5.33
1.70
9.06
day
day
0.07
0.07
361.00
297.00
25.27
20.79
232.53
0.55
233.08
8.35
241.43
35767.41
35767.40
7.12.1.2
9999
0125
0114
Description
Details of cost for cornices (30cm long 30cm
deep and 7.5cm project-iron) = 6.75cudm or
0.00675 cum.
MATERIAL:
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
Rate as per Item Number 7.12.1.2 of SH:
Stone work
Extra for using white cement
LABOUR:
Extra labour for making the cornices
Mason (for plain stone work) 2nd class
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(237.75 - 182.63 =) 55.12
TOTAL
Add CPOH @ 15% except on A i.e on
(238.30 - 182.63 =) 55.67
Cost of 0.00675 cum
Cost of 1 cum
Say
326
Unit
Quantity
Rate
Amount
cum
0.00675
27057.00
182.63 A
L.S.
5.33
1.70
9.06
day
day
0.07
0.07
361.00
297.00
25.27
20.79
237.75
0.55
238.30
8.35
246.65
36540.74
36540.75
7.33
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement
: 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment, matching the stone shade, jali slab without
any chamfers etc.
1164
2216
0125
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
tonne
1.10
0.101
160.00
94.80
176.00
9.57
day
day
L.S.
12.70
8.45
80.73
361.00
297.00
1.70
4584.70
2509.65
137.24
7417.16
74.17
7491.33
1123.70
8615.03
8615.05
Unit
Quantity
1165
2216
0125
0114
9999
7.34
Description
Details of cost for 1 sqm.
MATERIAL:
White sandstone slabx40mm = 1.00 sqm
Add 10% wastage
Total =0.10/1.10 sqm
White sand stone slab 40 mm thick (un-dressed)
Carriage of stone blocks white & red sand
stone & kota stone slab
LABOUR:
For making, dressing and fixing
Mason (for plain stone work) 2nd class
Beldar
Mortar and sundries.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Rate
Amount
sqm
tonne
1.10
0.101
180.00
94.80
198.00
9.57
day
day
L.S.
12.70
8.45
80.73
361.00
297.00
1.70
4584.70
2509.65
137.24
7439.16
74.39
7513.55
1127.03
8640.58
8640.60
Extra for laying stone work in or under water and/or liquid mud including cost of
pumping or bailing out water and removing slush etc. complete.
Note:- The quantity will be calculated by multiplying the depth measure from subsoil water level upto the centre of gravity of stone work under sub-soil water with
327
the quantity of stone work in cum executed under the sub-soil water. The depth of
centre of gravity shall be reconed correct to 0.1 m. 0.05 m or more shall be taken as
0.1 m and less than 0.05 m ignored.
Code
0011
0114
7.35
Code
0123
0124
0114
0115
Description
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. on 0.375day
Hire charges of Pump set of capacity 4000
litres/hour
Beldar
for cleaning slush
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 4.2 cum / mtr depth
cum/mtr depth
Say
Unit
Quantity
Rate
day
0.375
550.00
206.25
day
4.00
297.00
1188.00
1394.25
13.94
1408.19
211.23
1619.42
385.58
385.60
Unit
Quantity
day
day
day
day
0.02
0.02
0.25
0.15
Rate
393.00
361.00
297.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 cum
Say
7.36
Code
Amount
Amount
7.86
7.22
74.25
44.55
133.88
1.34
135.22
20.28
155.50
155.50
Wall lining butch work upto 10 m height with Dholpur stone 40 mm thick rough
facing on the exposed surface with stone strips of minimum length 300 mm and
required width, including embedding every tenth layer and bottom most layer in
masonry or concrete after making necessary chases of size 75x75 mm and by
providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2
stone dust) with an admixture of pigment to match the shade of stone complete as
per direction of Engineer-incharge.
Description
Unit
328
Quantity
Rate
Amount
Code
1165
1163
2216
1237
3.8
18.78
9999
0126
0125
0114
0101
9999
7.37
Description
Unit
White sand stone slab 40 mm thick (undressed) 75mm thick 3x0.04x1.0 = 0.12 sqm.
Add wastage 5% = 0.01 sqm.
Total =0.13 sqm
White sand stone slab 75 mm thick (un-dressed)
Carriage of stone blocks white & red sand
stone & kota stone slab
0.92x0.04 =0.0368 cum.
0.13x0.075 =0.0100 cum.
= 0.0468 cum. or 468 cudm.
468 cudm @ 2.3 kg/cudm = 108 kg = 0.108
tonne
Cutting marble or sand stone slab up to 50
mm thick by mechanical device
assuming 50mm thick strips 20x1.0 = 20
metre Cement mortar with coarse sand 1:3 for
(a) stone backing 12mm thick = 0.0144 cum.
(b) for fixing of stone = 0.40/25 - 0.0160 cum.
Total = 0.0304 cum
Rate as per Item Number 3.8 of SH:
Mortars Cutting chases and making good with
mortar after insurting stone etc.
Rate as per Item Number 18.78 of SH: Water
supply
White cement and pigment for pointing
LABOUR:
Mason (for ornamental stone work) 1 st class
Mason (for plain stone work) 2nd class
Beldar
Bhisti
Sundries and scaffolding brushes etc.
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,221.28 - 232.95 =) 988.33
TOTAL
Add CPOH @ 15% except on A i.e on
(1,231.16 - 232.95 =) 998.21
Cost of 1 sqm
Say
Quantity
Rate
Amount
sqm
0.92
180.00
165.60
sqm
tonne
0.13
0.108
300.00
94.80
39.00
10.24
metre
20.00
9.00
180.00
cum
0.0304
4347.70
132.17
metre
3.00
77.65
232.95 A
L.S.
40.43
1.70
68.73
day
day
day
day
L.S.
0.25
0.25
0.5
0.03
26.91
393.00
361.00
297.00
328.00
1.70
98.25
90.25
148.50
9.84
45.75
1221.28
9.88
1231.16
149.73
1380.89
1380.90
Stone work ( machine cut edges veneer work) for wall lining upto 10 m height,
backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse
sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), including rubbing
and polishing complete. (To be secured to the backing and the sides by means of
cramps and pins which shall be paid for separately).
Description
Unit
329
Quantity
Rate
Amount
Code
1169
2216
3.8
9999
0125
0114
0115
0139
9999
7.38
Description
Unit
Quantity
Rate
Amount
sqm
11.50
210.00
2415.00
tonne
0.67
94.80
63.52
cum
L.S.
0.144
40.43
4347.70
1.70
626.07
68.73
day
day
day
day
L.S.
6.50
6.50
4.30
10.80
111.54
361.00
297.00
297.00
328.00
1.70
2346.50
1930.50
1277.10
3542.40
189.62
12459.44
124.59
12584.03
1887.60
14471.63
1447.16
1447.15
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in
white cement with an admixture of pigment to match the stone shade.
2750
9999
3.8
0367
9999
0123
Description
Details of cost for 10 sqm.
MATERIAL:
Granite stone tile = 10.00 sqm.
Add 2.5% wastage = 0.25 sqm
Total =10.25 sqm
8 mm thick granite stone tiles (mirror
polished of all shades)
Carriage of granite tiles
Cement mortar 1:3
Rate as per Item Number 3.8 of SH:
Mortars
Portland Cement
slurry @ 3.3 kg/sqm
Mortar for pointing in white cement
LABOUR:
Labour for placing and fixing
Mason (brick layer) 1 st class
330
Unit
Quantity
Rate
Amount
sqm
10.25
700.00
7175.00
L.S.
40.04
1.70
68.07
cum
0.14
4347.70
608.68
tonne
0.033
5240.00
172.92
L.S.
25.74
1.70
43.76
day
7.70
393.00
3026.10
Code
0114
9999
9999
Description
Unit
Quantity
Rate
Amount
Beldar
Granular sand particles mixed with araldite
to be pasted on each side to form
interlocking arrangement with cement plaster
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
L.S.
7.70
260.00
297.00
1.70
2286.90
442.00
L.S.
171.60
1.70
291.72
14115.15
141.15
14256.30
2138.44
16394.74
1639.47
1639.45
7.38.1.2 Raj Nagar plain white marble / Udaipur green marble / Zebra black marble.
Code
7439
9999
3.8
0367
9999
0123
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
8mm thick Raj Nagar white stone tile =
10.00sqm Add 2.5% wastage = 0.25 sqm
Total = 10.25sqm
8mm thick (mirror polished tiles machine cut
edge) Raj Nagar white
Carriage of Raj Nagar white stone tiles
Cement mortar 1:3
Rate as per Item Number 3.8 of SH: Mortars
Portland Cement
slurry @ 3.3 kg/sqm
Mortar for pointing in white cement
Labour for placing and fixing :
Mason (brick layer) 1 st class day
Beldar
Granular sand particles mixed with araldite to
be pasted on each side to form interlocking
arrangement with cement plaster
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
331
Unit
Quantity
Rate
Amount
sqm
10.25
500.00
5125.00
L.S.
40.04
1.70
68.07
cum
tonne
0.14
0.033
4347.70
5240.00
608.68
172.92
L.S.
25.74
1.70
43.76
day
L.S.
7.70
7.70
260.00
393.00
297.00
1.70
3026.10
2286.90
442.00
L.S.
171.60
1.70
291.72
12065.15
120.65
12185.80
1827.87
14013.67
1401.37
1401.35
7.39
Code
9999
0123
0114
0101
9999
7.40
Extra for stone work for wall lining on exterior walls of height more than 10 m from
ground level for every additional height of 3 m or part there of.
Description
Details of cost for 10 sqm.
Analysis same as Item Number 13.74
MATERIAL:
Scaffolding
Mason (brick layer) 1st class
Beldar
Bhisti
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
L.S.
day
day
day
L.S.
215.28
0.30
0.30
0.15
28.60
Rate
1.70
393.00
297.00
328.00
1.70
Amount
365.98
117.90
89.10
49.20
48.62
670.80
6.71
677.51
101.63
779.14
77.91
77.90
Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw
cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to
structural steel frame work and / or with the help of cramps, pins etc. and sealing the
joints with approved weather sealant as per Architectural drawing and direction of
Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall
be paid for separately).
8683
1237
2216
9999
9999
9999
0126
0114
Description
Unit
332
Quantity
Rate
Amount
sqm
metre
4.35
10.00
460.00
9.00
2001.00
90.00
tonne
0.215
94.80
20.38
L.S.
L.S.
L.S.
day
day
30.68
153.40
204.75
2.00
4.00
1.70
1.70
1.70
393.00
297.00
52.16
260.78
348.08
786.00
1188.00
Code
0114
9999
0116
0114
9999
9999
Description
Labour for lifting stone
Beldar
Silicon gun / pump etc.
Labour for sealing
Fitter (grade 1)
Beldar
Sundries
Rubbing and polishing vertical surface of
stone cladding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 3 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
L.S.
1.00
204.75
297.00
1.70
297.00
348.08
day
day
L.S.
L.S.
0.25
0.50
204.75
51.22
393.00
297.00
1.70
1.70
98.25
148.50
348.08
87.07
6073.38
60.73
6134.11
920.12
7054.23
2351.41
2351.40
8684
1237
2216
9999
9999
9999
0126
0114
0114
9999
0116
0114
9999
Description
Unit
333
Quantity
Rate
Amount
sqm
metre
4.35
10.00
480.00
9.00
2088.00
90.00
tonne
0.215
94.80
20.38
L.S.
L.S.
L.S.
day
day
30.68
153.40
204.75
2.00
4.00
1.70
1.70
1.70
393.00
297.00
52.16
260.78
348.08
786.00
1188.00
day
L.S.
1.00
204.75
297.00
1.70
297.00
348.08
day
day
L.S.
0.25
0.50
204.75
393.00
297.00
1.70
98.25
148.50
348.08
Code
9999
7.41
Code
4009
1007
Description
Rubbing and polishing vertical surface of stone
cladding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 3 sqm
Cost of 1 sqm
Say
Unit
Quantity
L.S.
51.22
Rate
1.70
Amount
87.07
6160.38
61.60
6221.98
933.30
7155.28
2385.09
2385.10
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang
saw cut with machine cut edges sand stone) on walls at all heights using M.S. square
/ rectangular tube in the required pattern as per architectural drawing, including
cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with
the help of MS brackets / lugs of angle iron / flats etc. which shall be welded to the
frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 300x230x300
mm, including cost of necessary centring and shuttering and with approved expansion
hold fasteners on CC/RCC surface, including drilling necessary holes. Approved
cramps / pins etc. shall be welded to the frame work to support stone cladding, the
steel work will be given a priming coat of Zinc primer as approved by Engineer-inCharge and painted with two or more coats of epoxy paint (Shop drawings shall be
submitted by the contractor to the Engineer-in-Charge for approval before execution).
The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural
steel frame work shall be measured for the purpose of payment, stainless steel
cramps shall be paid for separately and nothing extra shall be paid).
Description
Details of cost for 100.78 kg.
M.S. tube 50x25x18mm vertical=4x3.0=12.00m.
Vertical=3x4x0.93=11.16m
Total= 23.16m.
Add 10% wastage = 2.32
Total 25.48 mts@2.02 kg/m=51.47 kg
Mild steel tubes hot finished welded
kilogram Angle iron 50x50x6mm
16x0.60=9.60
16x0.15=2.40
Total= 12.00
Add 10% wastage = 1.20m
Total= 13.20m
@4.50kg/m=59.4 kg or 0.594 q
Structural steel such as tees, angles channels
and R.S. joists
Cement concrete 1:2:4
= 16x0.30x0.23x0.30=0.331 cum
334
Unit
Quantity
Rate
Amount
type
51.47
52.00
2676.44
quintal
0.594
4650.00
2762.10
Code
4.1.3
0123
0124
0114
1215
0102
0100
0114
9999
13.52.1
9999
7.42
Code
8698
Description
Unit
Quantity
Rate
Amount
cum
0.331
day
day
day
0.26
0.26
2.00
393.00
361.00
297.00
102.18
93.86
594.00
cm
560.00
1.80
1008.00
day
day
day
L.S.
1.34
0.67
4.92
80.73
393.00
328.00
297.00
1.70
526.62
219.76
1461.24
137.24
sqm
5.82
109.80
639.04 A
L.S.
80.73
1.70
137.24
11986.80
97.19
4921.70 1629.08 A
12083.99
1472.38
13556.37
134.51
134.50
Providing and fixing adjustable stainless steel cramps of approved quality, required
shape and size, adjustable with stainless steel nuts, bolts and washer (total weight
not less than 260 gms), for dry stone cladding fixed on frame work at suitable location,
including making necessary recesses in stone slab, drilling required holes etc
complete as per direction of the Engineer-in-charge.
Description
Unit
335
each
Quantity
10.00
Rate
90.00
Amount
900.00
Code
0103
0124
0114
9999
9999
Description
Unit
Quantity
day
day
day
L.S.
L.S.
0.10
1.00
1.10
20.80
20.80
336
Rate
361.00
361.00
297.00
1.70
1.70
Amount
36.10
361.00
326.70
35.36
35.36
1694.52
16.95
1711.47
256.72
1968.19
196.82
196.80
337
8.1
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall
lining (veneer work), backing filled with a grout of 12 mm thick average in cement
mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar
1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the
marble shade (To be secured to the backing by means of cramps, which shall be
paid for separately).
8.1.1
Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble.
7452
2216
3.8
3.15
0126
0100
0114
0115
0101
0128
0102
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.60
650.00
390.00
tonne
0.03
94.80
2.84
cum
0.008
4347.70
34.78
cum
0.0012
10950.20
13.14
day
day
day
day
day
day
day
L.S.
0.335
0.335
0.335
0.335
0.335
0.165
0.135
13.39
393.00
328.00
297.00
297.00
328.00
328.00
393.00
1.70
131.66
109.88
99.50
99.50
109.88
54.12
53.06
22.76
1121.12
11.21
1132.33
169.85
1302.18
2604.36
2604.35
7453
Description
Unit
339
sqm
Quantity
1.20
Rate
750.00
Amount
900.00
Code
7453
2216
3.8
3.15
0126
0100
0114
0115
0101
0128
0102
9999
Description
Unit
Quantity
Rate
Amount
tonne
0.06
94.80
5.69
cum
0.0144
4347.70
62.61
cum
0.0025
10950.20
27.38
day
day
day
day
day
day
day
L.S.
0.67
0.67
0.67
0.67
0.67
0.33
0.27
26.91
393.00
328.00
297.00
297.00
328.00
328.00
393.00
1.70
263.31
219.76
198.99
198.99
219.76
108.24
106.11
45.75
2356.59
23.57
2380.16
357.02
2737.18
2737.20
8.2
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.
8.2.1
Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble.
7452
3.9
0123
0114
0115
9999
Description
Unit
340
Quantity
Rate
Amount
sqm
0.525
650.00
341.25
cum
0.012
3654.15
43.85
day
day
day
L.S.
0.70
0.325
0.325
39.00
393.00
297.00
297.00
1.70
275.10
96.52
96.52
66.30
Code
9999
Description
Unit
Quantity
L.S.
16.25
Unit
Quantity
Rate
1.70
Amount
27.62
947.16
9.47
956.63
143.49
1100.12
2200.24
2200.25
7453
3.9
0123
0114
0115
9999
9999
8.2.2
Description
Details of cost for 1.00 sqm.
Mirror polished Abu plain white = 1.00 sqm
Wastage 5% = 0.05 sqm
Total.=1.05 sqm
Raj nagar plain white marble (table rubbed
and polished) 18 mm thick (slab area more
than 0.50 sqm)
Cement mortar 1:4(1 cement: 4 coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
LABOUR:
Mason (brick layer) 1 st class
Beldar
Coolie
Moundling and edge polishing
Sundries apoxy resin & cutting machine etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Rate
Amount
sqm
1.05
750.00
787.50
cum
0.024
3654.15
87.70
day
day
day
L.S.
L.S.
1.40
0.65
0.65
78.00
32.50
393.00
297.00
297.00
1.70
1.70
550.20
193.05
193.05
132.60
55.25
1999.35
19.99
2019.34
302.90
2322.24
2322.25
7295
3.9
0123
0114
0115
9999
Description
Unit
341
Quantity
Rate
Amount
sqm
0.525
1900.00
997.50
cum
0.012
3654.15
43.85
day
day
day
L.S.
0.70
0.325
0.325
39.00
393.00
297.00
297.00
1.70
275.10
96.52
96.52
66.30
Code
9999
Description
Unit
Quantity
L.S.
16.25
Unit
Quantity
Rate
1.70
Amount
27.62
1603.41
16.03
1619.44
242.92
1862.36
3724.72
3724.70
7297
3.9
0123
0114
0115
9999
9999
Description
Details of cost for 2.00 sqm.
Mirror polished granite= 2.00 sqm
Wastage 5% = 0.10sqm
Total = 2.10sqm
Granite of any colour, 18 mm thick (slab area
above 0.50 sqm)
Cement mortar 1:4 (1 cement : 4 coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
LABOUR:
Mason (brick layer) 1 st class
Beldar
Coolie
Moulding and edge polishing
Sundries apoxy resin & cutting machine etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2 sqm
Cost of 1 sqm
Say
Rate
Amount
sqm
2.10
2000.00
4200.00
cum
0.048
3654.15
175.40
day
day
day
L.S.
L.S.
2.80
1.30
1.30
78.00
65.00
393.00
297.00
297.00
1.70
1.70
1100.40
386.10
386.10
132.60
110.50
6491.10
64.91
6556.01
983.40
7539.41
3769.71
3769.70
8.3
8.3.1
Marble work.
Code
Description
0019
0114
9999
Unit
day
day
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 metre
Cost of 1 metre
Say
342
Quantity
1.50
2.00
78.00
Rate
230.00
297.00
1.70
Amount
345.00
594.00
132.60
1071.60
10.72
1082.32
162.35
1244.67
124.47
124.45
8.3.2
Code
0019
0114
9999
Granite work.
Description
Unit
day
day
L.S.
Quantity
2.50
3.50
117.00
Rate
230.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 metre
Cost of 1 metre
Say
8.4
Code
0123
0115
9999
3.9
8.5
Code
0126
0114
9999
Amount
575.00
1039.50
198.90
1813.40
18.13
1831.53
274.73
2106.26
210.63
210.65
Extra for fixing marble / granite stone, over and above corresponding basic item, in
facia and drops of width upto 150 mm with epoxy resin based adhesive, including
cleaning etc. complete.
Description
Unit
Quantity
Rate
Amount
day
day
L.S.
0.30
0.30
39.00
393.00
297.00
1.70
117.90
89.10
66.30
cum
0.005
3654.15
18.27
291.57
2.92
294.49
44.17
338.66
225.77
225.75
Extra for providing opening of required size & shape for wash basin/ kitchen sink in
kitchen platform, vanity counter and similar location in marble/ granite/ stone work,
including necessary holes for pillar taps etc. including moulding, rubbing and
polishing of cut edges etc. complete.
Description
Unit
343
day
day
L.S.
Quantity
0.40
0.40
15.30
Rate
393.00
297.00
1.70
Amount
157.20
118.80
26.01
302.01
3.02
305.03
45.75
350.78
350.80
8.6
Code
0013
0114
0101
9999
Mirror polishing on marble work/ granite work/ stone work where ever required to
give high gloss finish complete.
Description
Unit
day
day
day
L.S.
Quantity
1.00
2.50
1.50
65.00
Rate
350.00
297.00
328.00
1.70
Amount
350.00
742.50
492.00
110.50
1695.00
16.95
1711.95
256.79
1968.74
196.87
196.85
8.7
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry
backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling
necessary hole in stones and embedding the cramp in the hole (fastener to be paid
separately).
8.7.1
Gunmetal cramps.
Code
7338
9999
3.7
9999
Description
Unit
344
Quantity
Rate
Amount
kilogram
L.S.
1.08
3.90
330.00
1.70
356.40
6.63
cum
L.S.
0.001
65.00
5107.40
1.70
5.11
110.50
478.64
4.79
483.43
72.51
555.94
539.75
539.75
8.7.2
Code
7339
9999
3.7
9999
Unit
Quantity
Rate
Amount
kilogram
L.S.
0.981
3.90
340.00
1.70
333.54
6.63
cum
L.S.
0.001
65.00
5107.40
1.70
5.11
110.50
455.78
4.56
460.34
69.05
529.39
566.80
566.80
8.8
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface
backing including drilling necessary holes and the cost of bolt etc complete.
8.8.1
7430
1034
0116
0114
9999
Description
Unit
345
Quantity
Rate
Amount
each
30.00
14.00
420.00
quintal
0.0045
5600.00
25.20
day
day
L.S.
0.25
0.25
32.50
393.00
297.00
1.70
98.25
74.25
55.25
672.95
6.73
679.68
101.95
781.63
26.05
26.05
7431
1034
0116
0114
9999
Description
Unit
Quantity
Rate
Amount
each
30.00
15.00
450.00
quintal
0.006
5600.00
33.60
day
day
L.S.
0.25
0.25
32.50
393.00
297.00 7
1.70
98.25
4.25
55.25
711.35
7.11
718.46
107.77
826.23
27.54
27.55
7432
1034
0116
0114
9999
Description
Unit
Quantity
Rate
Amount
each
30.00
28.00
840.00
quintal
0.0075
5600.00
42.00
day
day
L.S.
0.25
0.25
32.50
393.00
297.00
1.70
98.25
74.25
55.25
1109.75
11.10
1120.85
168.13
1288.98
42.97
42.95
8.9
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3
(1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/ sqm including pointing in
white cement complete.
8.9.1
8 mm thick.
8.9.1.1 Raj nagar plain white marble / Udaipur green marble / Zebra black marble.
Code
Description
Unit
346
Quantity
Rate
Amount
Code
2751
9999
3.8
9999
0367
0123
0114
9999
Description
Total = 1.025 sqm
8 mm thick marble tiles (polished) Raj Nagar
Carriage of tiles
Cement mortar 1:3 (1 Cement: 3 Coarse sand)
Rate as per Item Number 3.8 of SH: Mortars
Mortar for pointing
Portland Cement
Mason (brick layer) 1 st class
Beldar
Sundries etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
L.S.
1.025
3.95
360.00
1.70
369.00
6.72
cum
L.S.
tonne
day
day
L.S.
0.014
25.38
0.0033
1.00
1.00
16.90
4347.70
1.70
5240.00
393.00
297.00
1.70
60.87
43.15
17.29
393.00
297.00
28.73
1215.76
12.16
1227.92
184.19
1412.11
1412.10
2750
9999
3.8
9999
0367
0123
0114
9999
8.10
Description
Unit
Quantity
Rate
Amount
sqm
1.025
700.00
717.50
L.S.
3.95
1.70
6.72
cum
L.S.
tonne
day
day
L.S.
0.014
25.38
0.0033
1.00
1.00
16.90
4347.70
1.70
5240.00
393.00
297.00
1.70
60.87
43.15
17.29
393.00
297.00
28.73
1564.26
15.64
1579.90
236.98
1816.88
1816.90
Providing and fixing stone slab with table rubbed, edges rounded and polished, of
size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and
finished smooth.
347
7244
9999
9999
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.45
1750.00
787.50
L.S.
L.S.
21.58
43.16
1.70
1.70
36.69
73.37
L.S.
21.58
1.70
36.69
934.25
9.34
943.59
141.54
1085.13
2893.68
2893.70
7245
9999
9999
9999
8.11
Description
Unit
Quantity
Rate
Amount
sqm
0.45
1800.00
810.00
L.S.
L.S.
21.58
43.16
1.70
1.70
36.69
73.37
L.S.
21.58
1.70
36.69
956.75
9.57
966.32
144.95
1111.27
2963.39
2963.40
Providing and fixing machine cut, mirror / eggshell polished , Marble stone work for
wall lining (veneer work) including dado, skirting, risers of steps etc., in required
design and pattern wherever required, stones of different finished surface texture,
on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and
jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement
slurry admixed with pigment of matching shade, including rubbing, curing, polishing
etc. all complete as per Architectural drawings, and as directed by the Engineer-inCharge.
348
a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Code
1240
2216
3.8
0368
2209
9999
0126
0100
0114
0115
0101
0128
0102
9999
8.12
Description
Unit
Quantity
Rate
Amount
sqm
0.60
3330.00
1998.00
tonne
0.03
94.80
2.84
cum
tonne
0.008
0.00165
4347.70
14000.00
34.78
23.10
tonne
L.S.
0.00165
25.35
94.80
1.70
0.16
43.10
day
day
day
day
day
day
day
L.S.
0.335
0.335
0 335
0.335
0.335
0.165
0.135
13.39
393.00
328.00
297.00
297.00
328.00
328.00
393.00
1.70
131.66
109.88
99.50
99.50
109.88
54.12
53.06
22.76
2782.34
27.82
2810.16
421.52
3231.68
6463.36
6463.35
Providing and laying flamed finish Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete as per
the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement
slurry and pointing with white cement slurry admixed with pigment of matching
shade including rubbing , curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge :
a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or
equivalent.
Code
Description
Unit
349
Quantity
Rate
Amount
Code
1239
2216
3.9
0367
0874
2209
9999
0124
0114
0115
0139
9999
Description
Unit
350
Quantity
Rate
Amount
sqm
tonne
11.50
0.67
1695.00
94.80
19492.50
63.52
cum
tonne
kilogram
tonne
L.S.
0.224
0.05
4.50
0.05
25.35
3654.15
5240.00
55.00
94.80
1.70
818.53
262.00
247.50
4.74
43.10
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
208.13
361.00
297.00
297.00
328.00
1.70
433.20
297.00
297.00
1640.00
353.82
23952.91
239.53
24192.44
3628.87
27821.31
2782.13
2782.15
351
9.1
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for
separately).
9.1.1
Code
1189
2204
0156
0114
9.1.2
Code
1199
2204
0156
0114
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
38.00
0.038
660.00
121.88
2508.00
4.63
day
day
0.72
0.07
377.00
297.00
271.44
20.79
2804.86
28.05
2832.91
424.94
3257.85
90495.83
90495.80
Sal wood.
Description
Unit
353
Quantity
Rate
Amount
10 cudm
cum
38.00
0.038
520.00
121.88
1976.00
4.63
day
day
0.72
0.07
377.00
297.00
271.44
20.79
2272.86
22.73
2295.59
344.34
2639.93
73331.39
73331.40
9.1.3
Code
2466
2204
2504
9999
0156
0114
9.2
Code
7157
2204
0111
0112
0114
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
38.00
0.038
0.038
8.97
325.00
121.88
730.00
1.70
1235.00
4.63
27.74
15.25
day
day
0.72
0.07
377.00
297.00
271.44
20.79
1574.85
15.75
1590.60
238.59
1829.19
50810.83
50810.85
Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001( Part
B) in factory made frames of doors, windows, clerestory windows and other frames,
wrought framed and fixing in position with hold fast lugs or with dash fasteners of
required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Description
Unit
354
Quantity
Rate
Amount
10 cudm
38.00
710.00
2698.00
cum
0.038
121.88
4.63
day
day
day
0.20
0.20
0.20
393.00
361.00
297.00
78.60
72.20
59.40
2912.83
29.13
2941.96
441.29
3383.25
93979.17
93979.20
9.3
9.3.1
Code
1199
2204
0112
0114
9999
9.3.2
Code
2466
2204
2504
9999
0112
0114
9999
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in
position.
Sal wood.
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
166.00
166.00
520.00
121.88
8632.00
20.23
day
day
L.S.
1.00
1.00
53.82
361.00
297.00
1.70
361.00
297.00
91.49
9401.72
94.02
9495.74
1424.36
10920.10
69114.56
69114.60
Unit
355
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
166.00
0.166
0.166
18.20
325.00
121.88
730.00
1.70
5395.00
20.23
121.18
30.94
day
day
L.S.
1.00
1.00
53.82
361.00
297.00
1.70
361.00
297.00
91.49
6316.84
63.17
6380.01
957.00
7337.01
46436.77
46436.80
9.4
9.4.1
Code
1189
2204
0156
0114
9.4.2
Code
1199
2204
0156
0114
9.4.3
Code
2466
2204
2504
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
3.80
0.0038
660.00
121.88
250.80
0.46
day
day
0.072
0.007
377.00
297.00
27.14
2.08
280.48
2.80
283.28
42.49
325.77
9049.17
9049.15
Sal wood.
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
3.80
0.0038
520.00
121.88
197.60
0.46
day
day
0.072
0.007
377.00
297.00
27.14
2.08
227.28
2.27
229.55
34.43
263.98
7332.78
7332.80
Unit
356
10 cudm
cum
cum
L.S.
Quantity
3.80
0.0038
0.0038
0.90
Rate
325.00
121.88
730.00
1.70
Amount
123.50
0.46
2.77
1.53
Code
0156
0114
Description
LABOUR:
Carpenter (average)
Beldar
Unit
Quantity
day
day
0.072
0.007
Rate
377.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.036 cum
Cost of 1 cum
Say
Amount
27.14
2.08
157.48
1.57
159.05
23.86
182.91
5080.83
5080.85
9.5
Providing and fixing panelled or panelled and glazed shutters for doors, windows
and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished
of required size with necessery screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineerin- charge.
9.5.1
1190
2204
0595
0597
0637
0640
0156
0114
9999
Description
Unit
357
Quantity
Rate
Amount
51.00
0.051
6.00
725.00
121.88
85.00
3697.50
6.22
51.00
2.00
50.00
10.00
48.00
50.00
24.00
8.00
30.00
2.40
1.83
0.76
35.88
377.00
297.00
1.70
689.91
225.72
61.00
4767.75
47.68
4815.43
722.31
5537.74
2563.77
2563.75
1190
2204
0595
0597
0637
0640
0156
0114
9999
9.5.2
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
10 Nos
44.00
0.044
6.00
725.00
121.88
85.00
3190.00
5.36
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
1.83
0.76
35.88
377.00
297.00
1.70
689.91
225.72
61.00
4259.39
42.59
4301.98
645.30
4947.28
2290.41
2290.40
Description
Unit
358
Quantity
Rate
Amount
Code
2505
2204
2504
9999
0595
0597
0637
0640
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
10 Nos
51.00
0.051
0.051
9.10
6.00
370.00
121.88
730.00
1.70
85.00
1887.00
6.22
37.23
15.47
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
1.83
0.76
35.88
377.00
297.00
1.70
689.91
225.72
61.00
3009.95
30.10
3040.05
456.01
3496.06
1618.55
1618.55
Unit
Quantity
2505
2204
2504
9999
0595
0597
0637
0640
Description
Details of cost for shutters of a door (l/3rd
glazed and 2/3rd panelled) 200xl08cm =
2.16sqm.
MATERIAL:
Hollock wood
Styles 4x200xl0.0x3.0cm = 0.024cum+
Rails
Top rails 1x110.5x9.50x3.0cm = 0.003cum.+
Lock rails 1x110.5x15.0x3.0cm = 0.005cum+
Bottom rails 1x110.5xl9.7x3.0cm = 0.007cum+
Beading 2x186.1xl.9xl.2cm = 0.001cum
Total = 0.040 cum.+
Add for wastage @ 10% = 0.004cum
Grand Total = 0.044 cum or = 44 cudm
Hollock wood in planks
Carriage of timber
Kiln seasoning of timber
Chemical treatment
Bright finished or black enameled mild steel
butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel
butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel
screws 40 mm
Bright finished or black enameled mild steel
screws 20 mm
359
Rate
Amount
10 cudm
cum
cum
L.S.
10 Nos
44.00
0.044
0.044
9.10
6.00
370.00
121.88
730.00
1.70
85.00
1628.00
5.36
32.12
15.47
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
Code
0156
0114
9999
Description
LABOUR:
Carpenter (average)
Beldar
Sundries
Unit
Quantity
day
day
L.S.
1.83
0.76
35.88
Rate
377.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
9.5.3
Amount
689.91
225.72
61.00
2744.98
27.45
2772.43
415.86
3188.29
1476.06
1476.05
1200
2204
2504
0595
0597
0637
0640
0156
0114
9999
Description
Unit
360
Quantity
Rate
Amount
10 cudm
51.00
650.00
3315.00
cum
cum
10 Nos
0.051
0.051
6.00
121.88
730.00
85.00
6.22
37.23
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
1.83
0.76
35.88
377.00
297.00
1.70
689.91
225.72
61.00
4422.48
44.22
4466.70
670.00
5136.70
2378.10
2378.10
1200
2204
2504
0596
0637
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
10 nos
44.00
0.044
0.044
6.00
650.00
121.88
730.00
60.00
2860.00
5.36
32.12
36.00
100 nos
48.00
50.00
24.00
day
day
L.S.
1.83
0.76
35.88
377.00
297.00
1.70
689.91
225.72
61.00
3934.11
39.34
3973.45
596.02
4569.47
2115.50
2115.50
9.6
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter
conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed
butt hinges bright finished of required size with necessery screws, all complete as
per directions of Engineer-in-Charge and panelling with panels of.
9.6.1
12 mm thick plain grade - 1, medium density flat pressed three layer particle board
FPT - I or graded wood particle board FPT-I, IS :3087 marked, bonded with BWP type
synthetic resin adhesive as per IS : 848.
Code
7137
9999
Description
Unit
361
Quantity
Rate
Amount
sqm
2.38
1850.00
4403.00
L.S.
29.64
1.70
50.39
Code
0595
0597
0637
0640
0156
0114
9999
Description
Unit
FITTINGS:
Bright finished or black enameled
butt hinges 100x58x1.90 mm
Bright finished or black enameled
butt hinges 50x37x1.50 mm
Bright finished or black enameled
screws 40 mm
Bright finished or black enameled
screws 20 mm
LABOUR:
Carpenter (average)
Beldar
Sundries
Quantity
Rate
Amount
mild steel
10 Nos
6.00
85.00
51.00
mild steel
10 Nos
2.00
50.00
10.00
mild steel
100 nos
48.00
50.00
24.00
mild steel
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.52
0.60
35.88
377.00
297.00
1.70
196.04
178.20
61.00
4976.03
49.76
5025.79
753.87
5779.66
2428.43
2428.45
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.6.2
Code
7139
9999
0595
0597
0637
0640
0156
0114
Unit
362
Quantity
Rate
Amount
sqm
2.38
2030.00
4831.40
L.S.
29.64
1.70
50.39
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
0.52
0.60
377.00
297.00
196.04
178.20
Code
9999
Description
Sundries
Unit
Quantity
L.S.
35.88
Rate
Amount
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.6.3
Code
7143
9999
0595
0597
0637
0640
0156
0114
9999
61.00
5404.43
54.04
5458.47
818.77
6277.24
2637.50
2637.50
Unit
363
Quantity
Rate
Amount
sqm
2.38
1950.00
4641.00
L.S.
29.64
1.70
50.39
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.52
0.60
35.88
377.00
297.00
1.70
196.04
178.20
61.00
5214.03
52.14
5266.17
789.93
6056.10
2544.58
2544.60
9.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and
glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured). Panelling
for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
9.7.1
Code
1190
2204
0111
9999
9.7.2
Code
2505
2204
2504
9999
0111
9999
Description
Unit
10 cudm
cum
day
L.S.
Quantity
Rate
Amount
12.90
0.0129
725.00
121.88
935.25
1.57
0.57
4.42
393.00
1.70
224.01
7.51
1168.34
11.68
1180.02
177.00
1357.02
2056.09
2056.10
Unit
364
Quantity
Rate
Amount
10 cudm
12.90
370.00
477.30
cum
cum
L.S.
0.0129
0.0129
8.97
121.88
730.00
1.70
1.57
9.42
15.25
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
735.06
7.35
742.41
111.36
853.77
1293.59
1293.60
9.7.3
9.7.3.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328
BWR type.
Code
2480
9999
0111
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.80
1030.00
824.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
1058.61
10.59
1069.20
160.38
1229.58
1863.00
1863.00
9.7.3.2 Decorative plywood one side decorative veneer and commercial veneer on other
face (Type 1) conforming to IS 1328 BWR Type.
Code
2481
9999
0111
9999
Description
Unit
365
Quantity
Rate
Amount
sqm
0.80
840.00
672.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
906.61
9.07
915.68
137.35
1053.03
1595.50
1595.50
9.7.4
9.7.4.1 Decorative plywood one side decorative veneer and commercial veneer on other
face (Type 1) conforming to IS 1328 BWR Type.
Code
2483
9999
0111
9999
9.7.5
Description
Unit
Quantity
Rate
Amount
sqm
0.80
920.00
736.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
970.61
9.71
980.32
147.05
1127.37
1708.14
1708.15
9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium
density Grade I, IS : 3087 marked.
Code
0341
9999
0111
9999
Description
Unit
366
Quantity
Rate
Amount
sqm
0.80
325.00
260.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
494.61
4.95
499.56
74.93
574.49
870.44
870.45
9.7.5.2 Veneered flat pressed three layer or graded wood particle board with commercial
veneering on both sides conforming to IS :3097, grade I.
Code
7468
9999
0111
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.80
500.00
400.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
634.61
6.35
640.96
96.14
737.10
1116.82
1116.80
9.7.5.3 Pre-laminated particle board with decorative lamination on one side and balancing
lamination on other side, Grade I, Type II, IS : 12823 marked.
Code
7477
9999
0111
9999
Description
Unit
367
Quantity
Rate
Amount
sqm
0.80
740.00
592.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
826.61
8.27
834.88
125.23
960.11
1454.71
1454.70
9.7.5.4 Pre-laminated particle board with decorative lamination on both sides, Grade I,
Type II, IS :12823 marked.
Code
7480
9999
0111
9999
9.7.6
Description
Unit
Quantity
Rate
Amount
sqm
0.80
780.00
624.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
858.61
8.59
867.20
130.08
997.28
1511.03
1511.05
9.7.6.1 12 mm thick.
Code
7555
9999
0111
9999
Description
Unit
368
sqm
L.S.
day
L.S.
Quantity
0.80
1.82
0.57
4.42
Rate
650.00
1.70
393.00
1.70
Amount
520.00
3.09
224.01
7.51
754.61
7.55
762.16
114.32
876.48
1328.00
1328.00
9.7.7
2406
9999
0156
0119
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.80
330.00
264.00
L.S.
day
day
day
L.S.
1.82
0.57
0.15
0.15
25.47
1.70
377.00
361.00
297.00
1.70
3.09
214.89
54.15
44.55
43.30
623.98
6.24
630.22
94.53
724.75
1098.11
1098.10
2407
9999
0156
0119
0114
9999
Description
Unit
369
Quantity
Rate
Amount
sqm
0.80
500.00
400.00
L.S.
day
day
day
L.S.
1.82
0.57
0.15
0.15
25.47
1.70
377.00
361.00
297.00
1.70
3.09
214.89
54.15
44.55
43.30
759.98
7.60
767.58
115.14
882.72
1317.49
1317.50
9.7.8
Code
8737
9999
0112
9999
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm
wide aperture with matching wood beading.
Description
Unit
Quantity
Rate
Amount
sqm
0.80
830.00
664.00
L.S.
day
L.S.
1.82
0.57
4.42
1.70
361.00
1.70
3.09
205.77
7.51
880.37
8.80
889.17
133.38
1022.55
1549.32
1549.30
9.9
Providing and fixing glazed shutters for doors, windows and clerestory windows
using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges
bright finished of required size with necessary screws.
9.9.1
9.9.1.1 35 mm thick.
Code
1190
2406
0595
Description
Unit
370
Quantity
Rate
Amount
10 cudm
sqm
58.00
1.27
725.00
330.00
4205.00
419.10
10 Nos
6.00
85.00
51.00
Code
0597
0637
0640
2204
0156
0119
0114
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.058
121.88
7.07
day
day
day
L.S.
1.83
0.23
0.77
40.43
377.00
361.00
297.00
1.70
689.91
83.03
228.69
68.73
5788.93
57.89
5846.82
877.02
6723.84
3112.89
3112.90
Unit
Quantity
9.9.1.2 30 mm thick.
Code
1190
2406
0595
0597
0637
0640
2204
0156
Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
MATERIAL:
Teak wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails:
Top & intermediate rails
2x110.5x9.5x3.0cm = 0.006cum+
Lock and bottom rails
2x110.5x19.7x3.0cm = 0.013cum+
Beadings2x186.1xl.9xl.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050 cum = 50 cudm
Second class teak wood in planks
Float glass sheet of nominal thickness 4 mm
(weight not less than 10 kg/sqm)
Bright finished or black enameled mild steel
butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel
butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel
screws 40 mm
Bright finished or black enameled mild steel
screws 20 mm
Carriage of timber
LABOUR:
Carpenter (average)
371
Rate
Amount
10 cudm
sqm
50.00
1.27
725.00
330.00
3625.00
419.10
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.05
121.88
6.09
day
1.83
377.00
689.91
Code
0119
0114
9999
Description
Unit
Glazier
Beldar
Sundries
Quantity
day
day
L.S.
0.23
0.77
40.43
Rate
361.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
9.9.2
Amount
83.03
228.69
68.73
5207.95
52.08
5260.03
789.00
6049.03
2800.48
2800.50
9.9.2.1 35 mm thick.
Code
2505
2504
9999
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Unit
372
Quantity
Rate
Amount
10 cudm
cum
L.S.
sqm
58.00
0.058
9.10
1.27
370.00
730.00
1.70
330.00
2146.00
42.34
15.47
419.10
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.058
121.88
7.07
day
day
day
L.S.
1.83
0.23
0.77
40.43
377.00
361.00
297.00
1.70
689.91
83.03
228.69
68.73
3787.74
37.88
3825.62
573.84
4399.46
2036.79
2036.80
9.9.2.2 30 mm thick.
Code
2505
2504
9999
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Unit
373
Quantity
Rate
Amount
10 cudm
cum
L.S.
sqm
50.00
0.05
9.10
1.27
370.00
730.00
1.70
330.00
1850.00
36.50
15.47
419.10
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.05
121.88
6.09
day
day
day
L.S.
1.83
0.23
0.77
40.43
377.00
361.00
297.00
1.70
689.91
83.03
228.69
68.73
3484.92
34.85
3519.77
527.97
4047.74
1873.95
1873.95
9.9.3
9.9.3.1 35 mm thick.
Code
1200
2504
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
sqm
58.00
0.058
1.27
650.00
730.00
330.00
3770.00
42.34
419.10
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
day
day
day
L.S.
0.058
1.83
0.23
0.77
40.43
121.88
377.00
361.00
297.00
1.70
7.07
689.91
83.03
228.69
68.73
5396.27
53.96
5450.23
817.53
6267.76
2901.74
2901.75
9.9.3.2 30 mm thick.
Code
Description
Unit
374
Quantity
Rate
Amount
Code
1200
2504
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Unit
= 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050 = 50 cudm
Panels : 2 x 48 x 41 x 1.6cm = 0.006cm +
Sash bars 2 x 114 x 3.8 x 2.5cm = 0.003
cum + 6 x 48 x 3.8 x 2.5cm = 0.003 cum +
Beading - 16 x 92 x 1.4 x 1.2cm = 0.002 cum
Kiln seasoned selected sheesham wood planks 10 cudm
Kiln seasoning of timber
cum
Float glass sheet of nominal thickness 4 mm
sqm
(weight not less than 10 kg/sqm)
Bright finished or black enameled mild steel
10 Nos
butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel
10 Nos
butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel
100 nos
screws 40 mm
Bright finished or black enameled mild steel
100 Nos
screws 20 mm
Carriage of timber
cum
Carpenter (average)
day
Glazier
day
Beldar
day
Sundries
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
50.00
0.05
1.27
650.00
730.00
330.00
3250.00
36.50
419.10
6.00
85.00
51.00
2.00
50.00
10.00
48.00
50.00
24.00
8.00
30.00
2.40
0.05
1.83
0.23
0.77
40.43
121.88
377.00
361.00
297.00
1.70
6.09
689.91
83.03
228.69
68.73
4869.45
48.69
4918.14
737.72
5655.86
2618.45
2618.45
9.10
Providing and fixing factory made laminated veneer lumber glazed shutter
conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass
panes for doors, windows and clerestory windows, including ISI marked M.S.
pressed butt hinges bright finished of required size with necessary screws, all as
per directions of Engineer-in-charge.
9.10.1
30 mm thick shutters.
Code
7151
Description
Unit
375
sqm
Quantity
2.38
Rate
1650.00
Amount
3927.00
Code
9999
0595
0597
0637
0640
0156
0114
9999
Description
Unit
Carriage of shutters
Fittings
Bright finished or black enameled
butt hinges 100x58x1.90 mm
Bright finished or black enameled
butt hinges 50x37x1.50 mm
Bright finished or black enameled
screws 40 mm
Bright finished or black enameled
screws 20 mm
LABOUR:
Carpenter (average)
Beldar
Sundries
Quantity
Rate
Amount
L.S.
29.64
1.70
50.39
mild steel
10 Nos
6.00
85.00
51.00
mild steel
10 Nos
2.00
50.00
10.00
mild steel
100 nos
48.00
50.00
24.00
mild steel
100 Nos
8.00
30.00
2.40
0.52
0.60
35.88
377.00
297.00
1.70
196.04
178.20
61.00
4500.03
45.00
4545.03
681.75
5226.78
2196.13
2196.15
day
day
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.11
Extra for providing heavy sheet float glass panes instead of ordinary float glass in
glazed doors, windows and clerestory window shutters. (Area of opening for glass
panes excluding portion inside rebate shall be measured).
9.11.1
Code
2407
2406
Description
Unit
376
Quantity
Rate
Amount
sqm
1.00
500.00
500.00
sqm
-1.00
330.00
-330.00
170.00
1.70
171.70
25.76
197.46
197.45
9.12
Code
7032
2406
9.13
Code
7451
2406
9.14
Code
8220
8218
8211
8214
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass
panes 4 mm thick in doors, windows and clerestory window shutters. (Area of
opening for glass panes excluding portion inside rebate shall be measured).
Description
Unit
Quantity
Rate
Amount
sqm
1.00
335.00
335.00
sqm
-1.00
330.00
-330.00
5.00
0.05
5.05
0.76
5.81
5.80
Deduct for providing pin headed glass panes instead of ordinary float glass panes
weighing 4 mm thick in doors, windows and clerestory window shutters (Area of
opening for glass panes excluding portion inside rebate shall be measured).
Description
Unit
sqm
sqm
Quantity
-1.00
1.00
Rate
300.00
330.00
Amount
-300.00
330.00
30.00
0.30
30.30
4.54
34.84
34.85
Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed
butt hinges bright finished of required size with necessary screws. (Shutter area
to be measured).
Description
Unit
377
Quantity
Rate
Amount
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
Code
0595
0597
0637
0640
Description
Unit
Quantity
Rate
Amount
mild steel
10 Nos
-6.00
85.00
-51.00
mild steel
10 Nos
-2.00
50.00
-10.00
mild steel
100 nos
-48.00
50.00
-24.00
mild steel
100 Nos
-8.00
30.00
-2.40
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
186.60
1.87
188.47
28.27
216.74
100.34
100.35
9.15
Deduct for not providing hinges in doors,windows and clerestory window shutters
with.
9.15.1
9.15.1.1 For 2nd class teak wood and other class of wood shutters.
Code
8220
8218
8211
8214
Description
Unit
378
Quantity
Rate
Amount
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
274.00
2.74
276.74
41.51
318.25
147.34
147.35
9.15.2
ISI marked M.S. pressed butt hinges bright finished of required size with necessery
screws.
9.15.2.1 For 2nd class teak wood and other class of wood shutters.
Code
0595
0597
0637
0640
Description
Unit
Quantity
Rate
Amount
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
87.40
0.87
88.27
13.24
101.51
47.00
47.00
9.16
9.16.1
9.16.1.1 Second class teak wood including ISI marked anodised aluminium butt hinges
with necessary screws.
Code
1190
2204
2406
0694
Description
Unit
379
Quantity
Rate
Amount
10 cudm
cum
sqm
40.00
0.04
0.99
725.00
121.88
330.00
2900.00
4.88
326.70
10 nos
6.00
390.00
234.00
Code
0586
0111
0119
0114
9999
Description
Unit
Quantity
Rate
Amount
100 Nos
48.00
200.00
96.00
day
day
day
L.S.
2.40
0.18
0.77
40.43
393.00
361.00
297.00
1.70
943.20
64.98
228.69
68.73
4867.18
48.67
4915.85
737.38
5653.23
2617.24
2617.25
9.16.1.2 Second class teak wood including ISI marked nickel plated bright finished M.S.
piano hinges with necessary screws.
Code
1190
2204
2406
0608
0586
0111
0119
0114
9999
Description
Unit
380
Quantity
Rate
Amount
10 cudm
cum
sqm
40.00
0.04
0.99
725.00
121.88
330.00
2900.00
4.88
326.70
metre
4.00
40.00
160.00
100 Nos
114.00
200.00
228.00
day
day
day
L.S.
2.40
0.18
0.77
40.43
393.00
361.00
297.00
1.70
943.20
64.98
228.69
68.73
4925.18
49.25
4974.43
746.16
5720.59
2648.42
2648.40
9.16.2
Glazed shutters.
9.16.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges
with necessary screws.
Code
1190
2406
0694
0639
2204
0156
0119
0114
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
sqm
43.00
1.27
725.00
330.00
3117.50
419.10
10 nos
6.00
390.00
234.00
100 Nos
48.00
35.00
16.80
cum
0.043
121.88
5.24
day
day
day
L.S.
1.83
0.23
0.77
40.43
377.00
361.00
297.00
1.70
689.91
83.03
228.69
68.73
4863.00
48.63
4911.63
736.74
5648.37
2614.99
2615.00
9.16.2.2 Second class teak wood including ISI marked nickel plated bright finished M.S.
piano hinges with necessary screws.
Code
Description
Unit
381
Quantity
Rate
Amount
Code
1190
2406
0608
0639
2204
0156
0119
0114
9999
Description
Unit
2.5cm=0.006 cum
lock and bottom rail - 2 x 10.5 x19.7 x 2.5
cm=0.0011 cum
Total = 0.039 cum
Add for wastage @ 10 % =0.0004cum
Grand Total = 0.0403 cum or 43 cudm
Second class teak wood in planks
Float glass sheet of nominal thickness 4 mm
(weight not less than 10 kg/sqm)
Nickel plated bright finished mild steel piano
hinges 1 mm thick 25 mm wide
Bright finished or black enameled mild steel
screws 25 mm
Carriage of timber
LABOUR:
Carpenter (average)
Glazier
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
10 cudm
sqm
43.00
1.27
725.00
330.00
3117.50
419.10
metre
4.00
40.00
160.00
100 Nos
114.00
35.00
39.90
cum
0.043
121.88
5.24
day
day
day
L.S.
1.83
0.23
0.77
40.43
377.00
361.00
297.00
1.70
689.91
83.03
228.69
68.73
4812.10
48.12
4860.22
729.03
5589.25
2587.62
2587.60
9.17
Providing and fixing flat pressed 3 layer particle board medium density exterior
grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing
or studding with screws etc. complete (Frames, backing or studding to be paid
separately).
9.17.1
12 mm thick.
Code
Description
0341
9999
9999
0112
0114
Unit
382
Quantity
Rate
Amount
sqm
7.35
325.00
2388.75
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
day
day
0.90
1.00
361.00
297.00
324.90
297.00
3079.38
30.79
3110.17
466.53
3576.70
510.96
510.95
9.17.2
18 mm thick.
Code
Description
7055
9999
9999
0112
0114
Unit
Quantity
Rate
Amount
sqm
7.35
420.00
3087.00
L.S.
L.S.
19.76
26.91
1.70
1.70
33.59
45.75
day
day
0.90
1.00
361.00
297.00
324.90
297.00
3788.24
37.88
3826.12
573.92
4400.04
628.58
628.60
9.18
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle
board or graded wood particle board IS : 3087 marked, with one side decorative
and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,
in shelves with screws and fittings wherever required, edges to be painted with
polyurethane primer (fittings to be paid separately).
9.18.1
18 mm thick.
Code
Description
7478
9999
0112
0114
9999
Unit
383
Quantity
Rate
Amount
sqm
0.63
850.00
535.50
L.S.
0.91
1.70
1.55
day
day
L.S.
0.11
0.06
7.80
361.00
297.00
1.70
39.71
17.82
13.26
607.84
6.08
613.92
92.09
706.01
1176.68
1176.70
9.18.2
25 mm thick.
Code
Description
7479
9999
0112
0114
9999
Unit
Quantity
Rate
Amount
sqm
0.63
930.00
585.90
L.S.
1.82
1.70
3.09
day
day
L.S.
0.11
0.06
7.80
361.00
297.00
1.70
39.71
17.82
13.26
659.78
6.60
666.38
99.96
766.34
1277.23
1277.25
9.20
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part
I) decorative type, core of block board construction with frame of 1 st class hard
wood and well matched teak 3 ply veneering with vertical grains or cross bands
and face veneers on both faces of shutters.
9.20.1
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Code
0713
9999
8220
8211
0156
0114
Description
Unit
384
Quantity
Rate
Amount
sqm
2.20
1700.00
3740.00
L.S.
10 Nos
29.64
6.00
1.70
240.00
50.39
144.00
100 Nos
48.00
200.00
96.00
day
day
0.55
0.55
377.00
297.00
207.35
163.35
4401.09
44.01
4445.10
666.76
5111.86
2323.57
2323.55
9.20.2
Code
0714
9999
8220
8211
0156
0114
9.20.3
Code
0715
9999
0608
0639
0156
0114
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Description
Unit
Quantity
Rate
Amount
sqm
2.20
1550.00
3410.00
L.S.
10 Nos
29.64
6.00
1.70
240.00
50.39
144.00
100 Nos
48.00
200.00
96.00
day
day
0.55
0.55
377.00
297.00
207.35
163.35
4071.09
40.71
4111.80
616.77
4728.57
2149.35
2149.35
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.
Piano hinges IS : 3818 marked with necessary screws.
Description
Unit
385
Quantity
Rate
Amount
sqm
2.20
1400.00
3080.00
L.S.
29.64
1.70
50.39
metre
4.40
40.00
176.00
125.00
35.00
43.75
0.55
0.55
377.00
297.00
207.35
163.35
3720.84
37.21
3758.05
563.71
4321.76
1964.44
1964.45
100 Nos
day
day
9.21
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part
I) non-decorative type, core of block board construction with frame of 1 st class
hard wood and well matched commercial 3 ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters.
9.21.1
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Code
0717
9999
8220
8211
0156
0114
9.21.2
Code
0718
9999
8220
8211
0156
0114
Description
Unit
Quantity
Rate
Amount
sqm
2.20
1150.00
2530.00
L.S.
29.64
1.70
50.39
10 Nos
6.00
240.00
144.00
100 Nos
48.00
200.00
96.00
day
day
0.55
0.55
377.00
297.00
207.35
163.35
3191.09
31.91
3223.00
483.45
3706.45
1684.75
1684.75
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Description
Unit
386
Quantity
Rate
Amount
sqm
2.20
1000.00
2200.00
L.S.
29.64
1.70
50.39
10 Nos
6.00
240.00
144.00
100 Nos
48.00
200.00
96.00
day
day
0.55
0.55
377.00
297.00
207.35
163.35
2861.09
28.61
2889.70
433.46
3323.16
1510.53
1510.55
9.21.3
Code
0719
9999
0608
0639
0156
0114
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.
piano hinges with necessary screws.
Description
Unit
Quantity
Rate
Amount
sqm
2.20
900.00
1980.00
L.S.
29.64
1.70
50.39
metre
4.40
40.00
176.00
125.00
35.00
43.75
0.55
0.55
377.00
297.00
207.35
163.35
2620.84
26.21
2647.05
397.06
3044.11
1383.69
1383.70
100 Nos
day
day
9.22
Extra for Providing and fixing flush doors with decorative veneering instead of
non decorative ISI marked flush door shutters conforming to I.S. 2202 (part I).
9.22.1
Code
7307
9.23
Code
0752
Description
Unit
sqm
Quantity
1.00
Rate
340.00
Amount
340.00
340.00
3.40
343.40
51.51
394.91
394.90
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum
depth on all edges of flush door shutters (over all area of door shutter to be
measured).
Description
Unit
387
sqm of
door area
Quantity
1.00
Rate
300.00
Amount
300.00
300.00
3.00
303.00
45.45
348.45
348.45
9.24
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors
(cost of glass excluded) (overall area of door shutter to be measured).
9.24.1
Rectangular or square.
Code
0753
Description
Unit
sqm of
door
area
Quantity
1.00
Rate
115.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
9.24.2
Code
0754
Amount
115.00
115.00
1.15
116.15
17.42
133.57
133.55
Circular.
Description
Unit
sqm of
door
area
Quantity
1.00
Rate
180.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Amount
180.00
180.00
1.80
181.80
27.27
209.07
209.05
9.25
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall
area of door shutters to be measured).
9.25.1
Code
0755
Description
Unit
sqm of
door
area
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
388
Quantity
1.00
Rate
310.00
Amount
310.00
310.00
3.10
313.10
46.96
360.06
360.05
9.26
Code
0757
Extra for cutting rebate in flush door shutters (Total area of the shutter to be
measured).
Description
Unit
sqm of
door
area
Quantity
1.00
Rate
Amount
85.00
85.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
85.00
0.85
85.85
12.88
98.73
98.75
9.27
Providing and fixing wire gauge shutters using stainless steel grade 304 wire
gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both
directions for doors, windows and clerestory windows with necessary screws.
9.27.1
35 mm thick shutters.
9.27.1.1
With ISI marked M.S. pressed butt hinges bright finished of required size.
1190
7029
0595
0597
0637
0640
2204
0111
Description
Unit
389
10 cudm
Quantity
Rate
Amount
51.40
725.00
3726.50
sqm
1.41
250.00
352.50
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.0514
121.88
6.26
day
1.30
393.00
510.90
Code
0112
0114
0130
9999
Description
Unit
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
day
day
day
L.S.
Quantity
0.90
1.05
0.105
33.80
Rate
361.00
297.00
393.00
1.70
Amount
324.90
311.85
41.26
57.46
5419.03
54.19
5473.22
820.98
6294.20
2913.98
2914.00
2505
2204
2504
9999
7029
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
390
10 cudm
cum
cum
L.S.
Quantity
Rate
Amount
51.40
0.0514
0.0514
8.97
370.00
121.88
730.00
1.70
1901.80
6.26
37.52
15.25
sqm
1.41
250.00
352.50
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
3647.10
36.47
3683.57
552.54
4236.11
1961.16
1961.15
1200
2204
2504
7029
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
391
Quantity
Rate
Amount
51.40
650.00
3341.00
0.0514
0.0514
121.88
730.00
6.26
37.52
1.41
250.00
352.50
6.00
85.00
51.00
2.00
50.00
10.00
48.00
50.00
24.00
8.00
30.00
2.40
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
5071.05
50.71
5121.76
768.26
5890.02
2726.86
2726.85
9.27.1.2
1190
7029
8220
8218
8211
8214
2204
0111
0112
0114
0130
9999
Description
Unit
392
Quantity
Rate
Amount
51.40
725.00
3726.50
1.41
250.00
352.50
6.00
240.00
144.00
2.00
130.00
26.00
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
5605.63
56.06
5661.69
849.25
6510.94
3014.32
3014.30
2505
2504
9999
7029
8220
8218
8211
8214
2204
0111
0112
0114
0130
9999
Description
Unit
393
Quantity
Rate
Amount
51.40
0.0514
8.97
370.00
730.00
1.70
1901.80
37.52
15.25
1.41
250.00
352.50
6.00
240.00
144.00
2.00
130.00
26.00
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
3833.70
38.34
3872.04
580.81
4452.85
2061.50
2061.50
1200
2504
7029
8220
8218
8211
8214
2204
0111
0112
0114
0130
9999
Description
Unit
394
Quantity
Rate
Amount
51.40
650.00
3341.00
0.0514
730.00
37.52
1.41
250.00
352.50
6.00
240.00
144.00
2.00
130.00
26.00
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
5257.65
52.58
5310.23
796.53
6106.76
2827.20
2827.20
9.27.2
30 mm thick shutters.
9.27.2.1
With ISI marked M.S. pressed butt hinges bright finished of required size.
1190
2204
7029
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
395
Quantity
Rate
Amount
10 cudm
scum
44.00
0.044
725.00
121.88
3190.00
5.36
sqm
1.41
250.00
352.50
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4789.42
47.89
4837.31
725.60
5562.91
2575.42
2575.40
2505
2204
2504
9999
7029
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
396
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
44.00
0.044
0.044
9.10
370.00
121.88
730.00
1.70
1628.00
5.36
32.12
15.47
sqm
1.41
250.00
352.50
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
3275.01
32.75
3307.76
496.16
3803.92
1761.07
1761.05
1200
2504
2204
7029
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
397
Quantity
Rate
Amount
10 cudm
44.00
650.00
2860.00
cum
cum
0.044
0.044
730.00
121.88
32.12
5.36
sqm
1.41
250.00
352.50
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4491.54
44.92
4536.46
680.47
5216.93
2415.25
2415.25
9.27.2.2
1190
2204
7029
8220
8218
8211
8214
0111
0112
0114
0130
9999
Description
Unit
398
Quantity
Rate
Amount
10 cudm
cum
44.00
0.044
725.00
121.88
3190.00
5.36
sqm
1.41
250.00
352.50
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4976.02
49.76
5025.78
753.87
5779.65
2675.76
2675.75
2505
2504
9999
2204
7029
8220
8218
8211
8214
0111
0112
0114
0130
9999
Description
Unit
399
Quantity
Rate
Amount
10 cudm
cum
L.S.
cum
44.00
0.044
8.97
0.044
370.00
730.00
1.70
121.88
1628.00
32.12
15.25
5.36
sqm
1.41
250.00
352.50
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
3461.39
34.61
3496.00
524.40
4020.40
1861.30
1861.30
1200
2504
2204
7029
7029
8220
8211
8214
0111
0112
0114
0130
9999
Description
Unit
400
Quantity
Rate
Amount
10 cudm
44.00
650.00
2860.00
cum
cum
0.044
0.044
730.00
121.88
32.12
5.36
sqm
1.41
250.00
352.50
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4678.14
46.78
4724.92
708.74
5433.66
2515.58
2515.60
9.31
Providing and fixing wire gauge laminated veneer lumber shutters conforming to
IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with
average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as
per IS :1568 for doors, windows and clerestory windows, including ISI marked
M.S. pressed butt hinges bright finished of required size with necessary screws,
as per directions of Engineer-in-charge.
9.31.1
35 mm thick shutters.
Code
7154
9999
0595
0597
0637
0640
0156
0114
9999
9.31.2
Code
7155
9999
0595
Description
Unit
Quantity
Rate
Amount
sqm
2.38
1630.00
3879.40
L.S.
29.64
1.70
50.39
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
0.52
0.60
35.88
377.00
297.00
1.70
196.04
178.20
61.00
4452.43
44.52
4496.95
674.54
5171.49
2172.90
2172.90
day
day
L.S.
30 mm thick shutters.
Description
Unit
401
Quantity
Rate
Amount
sqm
2.38
1450.00
3451.00
L.S.
10 Nos
29.64
6.00
1.70
85.00
50.39
51.00
Code
0597
0637
0640
0156
0114
9999
9.32
Code
1189
2204
3.3
0112
0124
0114
Description
Unit
Quantity
Rate
Amount
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.52
0.60
35.88
377.00
297.00
1.70
196.04
178.20
61.00
4024.03
40.24
4064.27
609.64
4673.91
1963.83
1963.85
Providing 50x50x50 mm 2nd class teak wood plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls
etc.
Description
Unit
402
Quantity
Rate
Amount
14.00
0.014
660.00
121.88
924.00
1.71
0.002
3844.80
7.69
0.75
0.75
0.75
361.00
361.00
297.00
270.75
270.75
222.75
1697.65
16.98
1714.63
257.19
1971.82
19.72
19.70
9.33
Providing and fixing expandable fasteners of specified size with necessary plastic
sleeves and galvanised M.S. screws including drilling holes in masonry work / C.C
/ R.C.C. and making good etc. complete.
9.33.1
25 mm long.
Code
Description
7312
9999
9.33.2
32 mm long.
Code
Description
7313
9999
40 mm long.
Code
Description
9999
403
Rate
Amount
10.00
10.00
100.00
L.S.
20.80
1.70
35.36
135.36
1.35
136.71
20.51
157.22
15.72
15.70
Quantity
Rate
Amount
each
10.00
11.00
110.00
L.S.
26.00
1.70
44.20
154.20
1.54
155.74
23.36
179.10
17.91
17.90
Unit
Quantity
each
Unit
9.33.3
7314
Unit
Quantity
Rate
Amount
each
10.00
14.00
140.00
L.S.
26.00
1.70
44.20
184.20
1.84
186.04
27.91
213.95
21.40
21.40
9.33.4
50 mm long.
Code
Description
7315
9999
Unit
Quantity
Rate
Amount
each
10.00
15.00
150.00
L.S.
26.00
1.70
44.20
194.20
1.94
196.14
29.42
225.56
22.56
22.55
9.34
Providing and fixing 2nd class teak wood plain lining tongued and grooved, including
wooden plugs complete with necessary screws and priming coat on unexposed
surface.
9.34.1
40 mm thick.
Code
Description
1190
1231
9.32
13.50.1
2204
0111
0114
9999
Unit
404
Quantity
Rate
Amount
10 cudm
10 cudm
440.00
440.00
725.00
140.00
31900.00
6160.00
each
55.00
19.70
1083.50 A
sqm
10.00
30.75
307.50 A
cum
0.44
121.88
53.63
day
day
L.S.
2.15
1.62
53.82
393.00
297.00
1.70
844.95
481.14
91.49
40922.21
395.31
41317.52
5988.98
47306.50
4730.65
4730.65
9.34.2
25 mm thick.
Code
Description
1190
1231
2204
9.32
13.50.1
0111
0114
9999
9.34.3
20 mm thick.
Code
Description
1190
1231
2204
9.32
13.50.1
Unit
405
Rate
Amount
10 cudm
10 cudm
275.00
275.00
725.00
140.00
19937.50
3850.00
cum
0.275
121.88
33.52
each
55.00
19.70
1083.50 A
sqm
10.00
30.75
307.50 A
day
day
L.S.
2.15
1.62
53.82
393.00
297.00
1.70
844.95
481.14
91.49
26629.60
252.39
26881.99
3823.65
30705.64
3070.56
3070.5
Unit
Quantity
10 cudm
10 cudm
Quantity
Rate
Amount
220.00
220.00
725.00
140.00
15950.00
3080.00
cum
0.22
121.88
26.81
each
55.00
19.70
1083.50 A
sqm
10.00
30.75
307.50 A
Code
0111
0112
0114
9999
Description
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Sundries & screws etc.
Unit
Quantity
day
day
day
L.S.
1.08
0.80
1.08
53.82
Rate
Amount
393.00
361.00
297.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(21,573.30 - 1,391.00 =) 20,182.30
TOTAL
Add CPOH @ 15% except on A i.e on
(21,775.12 - 1,391.00 =) 20,384.12
Cost of 10 sqm
Cost of 1 sqm
Say
9.34.4
12 mm thick.
Code
Description
1190
1231
2204
9.32
0111
0112
0114
13.50.1
9999
21775.12
3057.62
24832.74
2483.27
2483.25
Unit
406
424.44
288.80
320.76
91.49
21573.30
201.82
Quantity
Rate
Amount
10 cudm
10 cudm
132.00
132.00
725.00
140.00
9570.00
1848.00
cum
0.132
121.88
16.09
each
55.00
19.70
1083.50 A
day
day
day
1.08
0.80
1.08
393.00
361.00
297.00
424.44
288.80
320.76
sqm
10.00
30.75
307.50 A
L.S.
53.82
1.70
91.49
13950.58
125.60
14076.18
1902.78
15978.96
1597.90
1597.90
9.35
Providing and fixing in wall lining flat pressed three layer (medium density) particle
board or graded wood Pre-laminated one side decorative lamination and other side
balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on
unexposed surface, with necessary fixing arrangement and screws etc. complete.
9.35.1
12 mm thick.
Code
Description
7477
9999
9999
13.50.1
0112
0114
7048
9.35.2
18 mm thick.
Code
Description
7478
Unit
407
Rate
Amount
sqm
11.00
740.00
8140.00
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
sqm
10.00
30.75
307.50 A
day
day
each
1.28
1.43
55.00
361.00
297.00
10.00
462.08
424.71
550.00
9953.02
96.46
10049.48
1461.30
11510.78
1151.08
1151.10
Unit
Quantity
sqm
Quantity
11.00
Rate
850.00
Amount
9350.00
Code
9999
9999
13.50.1
0112
0114
7048
Description
Carriage of particle board
Sundries & screws etc.
Priming coat
Rate as per Item Number 13.50.1 of SH:
Finishing
LABOUR:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 nos)
TOTAL
Add Water Charges @ 1% except on A i.e on
(11,163.02 - 307.50 =) 10,855.52
TOTAL
Add CPOH @ 15% except on A i.e on
(11,271.58 - 307.50 =) 10,964.08
Cost of 10 sqm
Cost of 1 sqm
Say
9.35.3
25 mm thick.
Code
Description
7479
9999
9999
13.50.1
0112
0114
7048
Unit
408
Rate
Amount
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
sqm
10.00
30.75
307.50 A
day
day
each
1.28
1.43
55.00
361.00
297.00
10.00
462.08
424.71
550.00
11163.02
108.56
11271.58
1644.61
12916.19
1291.62
1291.60
Unit
Quantity
Quantity
Rate
Amount
sqm
11.00
930.00
10230.00
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
sqm
10.00
30.75
307.50 A
day
day
each
1.28
1.43
55.00
361.00
297.00
10.00
462.08
424.71
550.00
12043.02
117.36
12160.38
1777.93
13938.31
1393.83
1393.85
9.36
Providing and fixing specified wood frame work consisting of battens 50x25 mm
fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming
coat complete.
9.36.1
Code
2505
2204
0111
0114
9999
13.50.1
7048
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
33.00
0.033
370.00
121.88
1221.00
4.02
day
day
L.S.
1.00
0.25
6.76
393.00
297.00
1.70
393.00
74.25
11.49
sqm
3.75
30.75
115.31 A
each
L.S.
55.00
71.50
10.00
1.70
550.00
121.55
2490.62
23.75
2514.37
359.86
2874.23
91975.36
91975.40
9.37
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming
to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including
priming coat on unexposed surface with.
9.37.1
Code
0759
9999
9.32
Description
Unit
409
Quantity
Rate
Amount
sqm
L.S.
12.00
5.46
420.00
1.70
5040.00
9.28
each
55.00
19.70
1083.50 A
Code
0111
0114
0130
9999
13.50.1
9.38
Code
7552
9999
9.32
0111
0114
0130
9999
13.50.1
Description
LABOUR:
Carpenter 1 st class
Beldar
Mistry
20mm nails without head for fixing ply
Painting with ready mixed priming coat
Rate as per Item Number 13.50.1 of SH:
Finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(9,627.17 - 1,391.00 =) 8,236.17
TOTAL
Add CPOH @ 15% except on A i.e on
(9,709.53 -1,391.00 =) 8,318.53
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
day
L.S.
3.80
4.60
0.60
53.82
393.00
297.00
393.00
1.70
1493.40
1366.20
235.80
91.49
sqm
10.00
30.75
307.50 A
9627.17
82.36
9709.53
1247.78
10957.31
1095.73
1095.75
Providing and fixing 4 mm thick coir veneer board, ISI marked IS : 14842, plain
lining with necessary screws, priming coat on unexposed surface etc., complete.
Description
Unit
410
Quantity
Rate
Amount
sqm
L.S.
12.00
5.46
290.00
1.70
3480.00
9.28
each
55.00
19.70
1083.50 A
day
day
day
L.S.
3.80
4.60
0.60
53.82
393.00
297.00
393.00
1.70
1493.40
1366.20
235.80
91.49
sqm
10.00
30.75
307.50 A
8067.17
66.76
8133.93
1011.44
9145.37
914.54
914.55
9.39
Providing and fixing skirting with Pre-laminated (one side decorative and other
side balancing lamination) flat pressed 3 layer or graded particle board (medium
density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and
screws, including drilling necessary holes for rawl plugs etc. and priming coat on
unexposed surface complete.
9.39.1
18 mm thick.
Code
Description
7478
9999
7048
9999
0112
0114
9999
13.50.1
9.39.2
25 mm thick.
Code
Description
7479
Unit
411
Rate
Amount
sqm
6.60
850.00
5610.00
L.S.
each
L.S.
8.11
102.00
130.00
1.70
10.00
1.70
13.79
1020.00
221.00
day
day
L.S.
0.77
0.86
53.82
361.00
297.00
1.70
277.97
255.42
91.49
sqm
6.00
30.75
184.50 A
7674.17
74.90
7749.07
1134.69
8883.76
1480.63
1480.65
Unit
Quantity
sqm
Quantity
6.60
Rate
930.00
Amount
6138.00
Code
9999
7048
9999
0112
0114
9999
13.50.1
Description
density) Grade I, Type II conforming to IS :
12823 (exterior grade) 25 mm thick
Carriage of particle board
Rawl plug 50 mm (designation 10 nos)
Labour for drilling holes
LABOUR:
For dressing and fixing particle board to
skirting
Carpenter 2nd class
Beldar
Sundries (Screws, sand paper)
Painting with ready mixed priming coat at back
Rate as per Item Number 13.50.1 of SH:
Finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(8,202.17 - 184.50 =) 8,017.67
TOTAL
Add CPOH @ 15% except on A i.e on
(8,282.35 - 184.50 =) 8,097.85
Cost of 6 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
L.S.
each
L.S.
8.11
102.00
130.00
1.70
10.00
1.70
13.79
1020.00
221.00
day
day
L.S.
0.77
0.86
53.82
361.00
297.00
1.70
277.97
255.42
91.49
sqm
6.00
30.75
184.50 A
8202.17
80.18
8282.35
1214.68
9497.03
1582.84
1582.85
9.40
Providing and fixing wooden moulded beading to door and window frames with
iron screws, plugs and priming coat on unexposed surface etc. complete.
9.40.1
1190
2204
0637
13.50.1
0111
Description
Unit
412
10 cudm
cum
100 nos
Quantity
Rate
Amount
3.30
0.0033
36.00
725.00
121.88
50.00
239.25
0.40
18.00
sqm
0.37
30.75
11.38 A
day
0.53
393.00
208.29
477.32
4.66
481.98
70.59
552.57
110.51
110.50
9.40.1.2
Code
1190
2204
0637
13.50.1
0111
50 x 20 mm.
Description
Unit
10 cudm
cum
100 nos
Quantity
725.00
121.88
50.00
398.75
0.67
18.00
sqm
0.45
30.75
13.84 A
day
0.53
393.00
208.29
639.55
6.26
645.81
94.80
740.61
148.12
148.10
9.40.2.1
50x12 mm.
2505
2204
0637
Description
Unit
413
Amount
5.50
0.0055
36.00
9.40.2
Code
Rate
10 cudm
cum
100 nos
Quantity
3.30
0.0033
36.00
Rate
370.00
121.88
50.00
Amount
122.10
0.40
18.00
Code
13.50.1
0111
9.40.2.2
Code
2505
2204
0637
13.50.1
0111
Description
Unit
Quantity
Rate
Amount
sqm
0.37
30.75
11.38 A
day
0.53
393.00
208.29
360.17
3.49
363.66
52.84
416.50
83.30
83.30
50x20 mm.
Description
Unit
414
10 cudm
cum
100 nos
Quantity
Rate
Amount
5.50
0.0055
36.00
370.00
121.88
50.00
203.50
0.67
18.00
sqm
0.45
30.75
13.84 A
day
0.53
393.00
208.29
444.30
4.30
448.60
65.21
513.81
102.76
102.75
9.41
Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to
be paid separately), including fixing 50x12 mm beading complete with.
9.41.1
Code
1190
2204
0111
0112
0114
0130
9999
9.42
Code
7055
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
32.00
0.032
725.00
121.88
2320.00
3.90
day
day
day
day
L.S.
0.75
1.00
0.50
0.10
33.80
393.00
361.00
297.00
393.00
1.70
294.75
361.00
148.50
39.30
57.46
3224.91
32.25
3257.16
488.57
3745.73
1702.60
1702.60
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or
graded wood particle board medium density grade I, IS : 3087 marked, including
top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel
plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets,
including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock
wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl
plugs 75 mm long etc. all complete.
Description
Unit
415
sqm
Quantity
0.32
Rate
420.00
Amount
134.40
Code
2412
7034
7035
9999
9999
2505
7048
0112
0114
0130
9999
9.43
Code
7556
Description
Unit
Quantity
Rate
Amount
sqm
0.27
360.00
97.20
metre
each
1.65
2.00
70.00
7.00
115.50
14.00
L.S.
L.S.
0.52
8.06
1.70
1.70
0.88
13.70
10 cudm
each
0.32
2.00
370.00
10.00
11.84
20.00
day
day
day
L.S.
0.18
0.18
0.11
2.73
361.00
297.00
393.00
1.70
64.98
53.46
43.23
4.64
573.83
5.74
579.57
86.94
666.51
333.26
333.25
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI
marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated
M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including
fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats
of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75
mm long etc. all complete.
Description
Unit
sqm
416
Quantity
0.32
Rate
1030.00
Amount
329.60
Code
7553
7034
7035
9999
9999
2505
7048
0112
0114
0130
9999
Description
Unit
Quantity
Rate
Amount
sqm
metre
each
0.27
1.65
2.00
390.00
70.00
7.00
105.30
115.50
14.00
L.S.
L.S.
0.52
8.06
1.70
1.70
0.88
13.70
10 cudm
each
0.32
2.00
370.00
10.00
11.84
20.00
day
day
day
L.S.
0.18
0.18
0.11
2.73
361.00
297.00
393.00
1.70
64.98
53.46
43.23
4.64
777.13
7.77
784.90
117.73
902.63
451.32
451.30
9.44
Extra for using veneered particle board conforming to IS: 3097 Grade I, in item of
pelmet 18 mm thick 150 mm wide.
9.44.1
Code
0347
Description
Unit
417
sqm
Quantity
0.32
Rate
170.00
Amount
54.40
54.40
0.54
54.94
8.24
63.18
31.59
31.60
9.44.2
Code
0348
9.45
Code
7049
0112
0114
Unit
sqm
Quantity
0.32
Rate
Amount
500.00
160.00
160.00
1.60
161.60
24.24
185.84
92.92
92.90
Unit
Quantity
Rate
Amount
metre
10.00
22.00
220.00
day
day
0.25
0.25
361.00
297.00
90.25
74.25
384.50
3.84
388.34
58.25
446.59
44.66
44.65
9.46
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,
with two chromium plated brass brackets fixed with C.P. brass screws and wooden
plugs, etc., wherever necessary complete.
9.46.1
12 mm dia.
Code
0590
7023
9999
Description
Unit
418
Quantity
Rate
Amount
metre
2.00
190.00
380.00
each
L.S.
2.00
4.03
7.00
1.70
14.00
6.85
Code
9999
9.32
9999
9999
9.46.2
Code
0591
7023
9999
9999
9.32
9999
9999
Description
Unit
Carriage
Wooden plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement:
3 fine sand)
Rate as per Item Number 9.32 of SH: Wood
and PVC work
Labour
Sundries
TOTAL
Add Water Charges @ 1% except on A i.e on
(450.19 - 39.40 =) 410.79
TOTAL
Add CPOH @ 15% except on A i.e on
(454.30 -39.40 =) 414.90
Cost of 2 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
L.S.
1.56
1.70
2.65
each
2.00
19.70
39.40 A
L.S.
L.S.
2.73
1.56
1.70
1.70
4.64
2.65
450.19
4.11
454.30
62.23
516.53
258.27
258.25
20 mm dia.
Description
Unit
419
Quantity
Rate
Amount
metre
2.00
260.00
520.00
each
L.S.
L.S.
2.00
4.03
1.56
7.00
1.70
1.70
14.00
6.85
2.65
each
2.00
19.70
39.40 A
L.S.
L.S.
2.73
1.56
1.70
1.70
4.64
2.65
590.19
5.51
595.70
83.44
679.14
339.57
339.55
9.46.3
Code
0592
7023
9999
9999
9.32
9999
9999
25 mm dia.
Description
Unit
Quantity
Rate
Amount
metre
2.00
350.00
700.00
each
L.S.
L.S.
2.00
4.03
1.56
7.00
1.70
1.70
14.00
6.85
2.65
each
2.00
19.70
39.40 A
L.S.
L.S.
2.73
1.56
1.70
1.70
4.64
2.65
770.19
7.31
777.50
110.72
888.22
444.11
444.10
9.47
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets.
9.47.1
Code
7034
7035
9999
9999
7048
9999
9999
Description
Unit
420
Quantity
Rate
Amount
metre
each
2.00
2.00
70.00
7.00
140.00
14.00
L.S.
L.S.
each
L.S.
L.S.
4.03
1.56
2.00
5.20
1.56
1.70
1.70
10.00
1.70
1.70
6.85
2.65
20.00
8.84
2.65
194.99
1.95
196.94
29.54
226.48
113.24
113.25
9.47.2
Code
7033
7036
9999
9999
7048
9999
9999
Unit
Quantity
Rate
Amount
metre
each
2.00
2.00
80.00
8.00
160.00
16.00
L.S.
L.S.
each
L.S.
L.S.
4.03
1.56
2.00
5.20
1.56
1.70
1.70
10.00
1.70
1.70
6.85
2.65
20.00
8.84
2.65
216.99
2.17
219.16
32.87
252.03
126.02
126.00
9.48
Providing and fixing M.S. grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.
9.48.1
Code
1003
1008
2205
9999
9999
13.50.3
Description
Unit
421
Quantity
Rate
Amount
quintal
0.165
4300.00
709.50
quintal
tonne
0.04
0.02
4200.00
94.80
168.00
1.90
L.S.
L.S.
26.91
19.76
1.70
1.70
45.75
33.59
sqm
1.08
24.95
26.95 A
Code
0102
0114
9.48.2
Code
1003
1008
2205
9999
9999
13.50.3
0102
0114
7048
9999
Description
LABOUR:
Blacksmith 1 st class
Beldar
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,650.37 - 26.95 =) 1,623.42
TOTAL
Add CPOH @ 15% except on A i.e on
(1,666.60 - 26.95 =) 1,639.65
Cost of 18.54 kg (A+B)
Cost of 1 kg
Say
Unit
Quantity
day
day
0.86
1.10
Rate
Amount
393.00
297.00
337.98
326.70
1650.37
16.23
1666.60
245.95
1912.55
103.16
103.15
Unit
422
Quantity
Rate
Amount
quintal
0.165
4300.00
709.50
quintal
tonne
0.04
0.02
4200.00
94.80
168.00
1.90
L.S.
L.S.
26.91
19.76
1.70
1.70
45.75
33.59
sqm
1.08
24.95
26.95 A
day
day
each
L.S.
0.86
1.10
8.00
26.00
393.00
297.00
10.00
1.70
337.98
326.70
80.00
44.20
1774.57
17.48
1792.05
264.76
2056.81
110.94
110.95
9.49
Code
1015
9999
13.50.3
1190
2204
0112
0114
9999
9.50
Code
1021
9999
Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm
thick for windows etc. including 62 x19 mm beading of II nd class teak wood and
priming coat with approved steel primer all complete.
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
1.69
1.82
290.00
1.70
490.10
3.09
sqm
1.54
24.95
38.42 A
10 cudm
cum
6.00
0.006
725.00
121.88
435.00
0.73
day
day
L.S.
0.33
0.25
26.91
361.00
297.00
1.70
119.13
74.25
45.75
1206.47
11.68
1218.15
176.96
1395.11
905.92
905.90
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not
less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of
second class teak wood and priming coat with approved steel primer all complete.
Description
Unit
423
sqm
L.S.
Quantity
1.69
1.82
Rate
430.00
1.70
Amount
726.70
3.09
Code
13.50.3
1190
2204
0112
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
1.54
24.95
38.42 A
10 cudm
cum
6.00
0.006
725.00
121.88
435.00
0.73
day
day
L.S.
0.33
0.25
19.76
361.00
297.00
1.70
119.13
74.25
33.59
1430.91
13.92
1444.83
210.96
1655.79
1075.19
1075.20
9.51
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory
windows using wire gauge with average width of aperture 1.4 mm in both directions
with wire of dia 0.63 mm all complete.
9.51.1
Code
7029
9999
1190
2204
0112
0114
9999
Description
Unit
424
Quantity
Rate
Amount
sqm
1.69
250.00
422.50
L.S.
1.82
1.70
3.09
10 cudm
cum
6.00
0.006
725.00
121.88
435.00
0.73
day
day
L.S.
0.33
0.25
19.76
361.00
297.00
1.70
119.13
74.25
33.59
1088.29
10.88
1099.17
164.88
1264.05
820.81
820.80
9.51.2
Code
7029
9999
7349
0112
0114
9999
9.52
Code
1021
2406
Unit
Quantity
Rate
Amount
sqm
1.69
250.00
422.50
L.S.
metre
1.82
5.00
1.70
15.00
3.09
75.00
day
day
L.S.
0.33
0.25
19.76
361.00
297.00
1.70
119.13
74.25
33.59
727.56
7.28
734.84
110.23
845.07
548.75
548.75
Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than
7.75 kg per sqm in panelled and glazed door and window shutter instead of glass
sheet 4 mm thick.
Description
Unit
425
sqm
sqm
Quantity
1.00
-1.00
Rate
430.00
330.00
Amount
430.00
-330.00
100.00
1.00
101.00
15.15
116.15
116.15
9.53
Code
1008
9999
4.2.5
9999
0103
0123
0114
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete
block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate
20 mm nominal size).
Description
Unit
Quantity
Rate
Amount
quintal
L.S.
0.0067
1.82
4200.00
1.70
28.14
3.09
cum
0.005
5309.00
26.54 A
L.S.
5.46
1.70
9.28
day
day
day
0.03
0.03
0.03
361.00
393.00
297.00
10.83
11.79
8.91
98.58
0.72
99.30
10.91
110.21
110.20
9.54
9.54.1
Sal wood.
Code
1199
2204
13.57.1
Description
Unit
426
10 cudm
cum
sqm
Quantity
Rate
Amount
207.10
0.207
520.00
121.88
10769.20
25.23
0.54
22.45
12.12 A
Code
0112
0114
0100
9999
Description
Unit
LABOUR:
Carpenter 2nd class
Beldar
Bandhani
Sundries
day
day
day
L.S.
Quantity
0.70
1.45
0.70
26.91
Rate
361.00
297.00
328.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(11,765.25 - 12.12 =) 11,753.13
TOTAL
Add CPOH @ 15% except on A i.e on
(11,882.78 - 12.12 =) 11,870.66
Cost of 0.203 cum
Cost of 1 cum
Say
9.54.2
Code
2466
2204
13.57.1
0112
0114
0100
9999
Amount
252.70
430.65
229.60
45.75
11765.25
117.53
11882.78
1780.60
13663.38
67307.29
67307.30
Hollock wood.
Description
Unit
427
10 cudm
cum
Quantity
Rate
Amount
207.10
0.207
325.00
121.88
6730.75
25.23
sqm
0.54
22.45
12.12 A
day
day
day
L.S.
0.70
1.45
0.70
26.91
361.00
297.00
328.00
1.70
252.70
430.65
229.60
45.75
7726.80
77.15
7803.95
1168.77
8972.72
44200.59
44200.60
9.55
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with
necessary screws etc. complete.
9.55.1
125x65x2.12 mm.
Code
0594
0635
9999
0112
0114
9.55.2
Code
0595
0637
9999
0112
0114
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
140.00
140.00
100 Nos
80.00
65.00
52.00
L.S.
2.73
1.70
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
273.91
2.74
276.65
41.50
318.15
31.82
31.80
100x58x1.90 mm.
Description
Unit
428
Quantity
Rate
Amount
10 Nos
10.00
85.00
85.00
100 nos
80.00
50.00
40.00
L.S.
2.73
1.70
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
206.91
2.07
208.98
31.35
240.33
24.03
24.05
9.55.3
Code
0596
0638
9999
0112
0114
9.55.4
Code
0597
0640
9999
0112
75x47x1.70 mm.
Description
Unit
Quantity
Rate
Amount
10 nos
10.00
60.00
60.00
100 nos
60.00
40.00
24.00
L.S.
1.82
1.70
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
164.36
1.64
166.00
24.90
190.90
19.09
19.10
50x37x1.50 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
50.00
50.00
100 Nos
40.00
30.00
12.00
L.S.
0.91
1.70
1.55
day
0.08
361.00
28.88
92.43
0.92
93.35
14.00
107.35
10.74
10.75
9.56
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with
necessary screws etc. complete.
9.56.1
125x90x4.00 mm.
Code
8222
0635
Description
Unit
429
Quantity
Rate
Amount
10 Nos
10.00
330.00
330.00
100 Nos
80.00
65.00
52.00
Code
9999
0112
0114
Description
Unit
Quantity
Rate
Amount
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
L.S.
2.73
1.70
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
463.91
4.64
468.55
70.28
538.83
53.88
53.90
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.56.2
Code
8223
0637
9999
0112
0114
9.56.3
Code
8224
0638
9999
0112
0114
100x75x3.50 mm.
Description
Details of cost for ten hinges.
MATERIAL:
M.S. heavy weight butt hinges 100x75x3.5
mm IS: 1341 marked
Bright finished or black enameled mild steel
screws 40 mm
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
170.00
170.00
100 nos
80.00
50.00
40.00
L.S.
2.73
1.70
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
291.91
2.92
294.83
44.22
339.05
33.91
33.90
75x60x3.10 mm.
Description
Unit
430
Quantity
Rate
Amount
10 Nos
10.00
90.00
90.00
100 nos
60.00
40.00
24.00
L.S.
1.82
1.70
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
194.36
1.94
196.30
29.44
225.74
22.57
22.55
9.56.4
Code
8225
0640
9999
0112
50x40x2.50 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
75.00
75.00
100 Nos
40.00
30.00
12.00
L.S.
0.91
1.70
1.55
day
0.08
361.00
28.88
117.43
1.17
118.60
136.39
13.64
13.65
9.57
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary
screws etc. complete.
9.57.1
125x65x2.12 mm.
Code
0642
0682
9999
0112
0114
9.57.2
Code
0643
0683
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
140.00
140.00
100 Nos
L.S.
80.00
3.64
75.00
1.70
60.00
6.19
day
day
0.14
0.09
361.00
297.00
50.54
26.73
283.46
2.83
286.29
42.94
329.23
32.92
32.90
100x58x1.90 mm.
Description
Unit
431
Quantity
Rate
Amount
10 Nos
10.00
90.00
90.00
100 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
Code
0112
0114
Description
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
0.14
0.09
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.57.3
Code
0644
0684
9999
0112
0114
9.57.4
Code
0645
0686
9999
0112
Amount
50.54
26.73
219.91
2.20
222.11
33.32
255.43
25.54
25.55
75x47x1.70 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Oxidised mild steel butt hinges 75x47x
1.70 mm
Oxidised mild steel screws 30 mm
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
65.00
65.00
100 Nos
L.S.
60.00
1.82
55.00
1.70
33.00
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
178.36
1.78
180.14
27.02
207.16
20.72
20.70
50x37x1.50 mm.
Description
Unit
432
Quantity
Rate
Amount
10 Nos
10.00
55.00
55.00
100 Nos
L.S.
40.00
0.91
35.00
1.70
14.00
1.55
day
0.08
361.00
28.88
99.43
0.99
100.42
15.06
115.48
11.55
11.55
9.58
Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with
necessary screws etc. complete.
9.58.1
150x125x27x2.80 mm.
Code
0646
0683
9999
0112
0114
9.58.2
Code
0647
0683
9999
0112
0114
9.58.3
Code
0648
0683
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
340.00
340.00
100 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
day
day
0.14
0.14
361.00
297.00
50.54
41.58
484.76
4.85
489.61
73.44
563.05
56.31
56.30
125x125x27x2.80 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
315.00
315.00
100 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
day
day
0.14
0.14
361.00
297.00
50.54
41.58
459.76
4.60
464.36
69.65
534.01
53.40
53.40
100x125x27x2.80 mm.
Description
Unit
433
Quantity
Rate
Amount
10 Nos
10.00
235.00
235.00
100 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
Code
0112
0114
Description
LABOUR:
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
0.14
0.14
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.58.4
Code
0649
0684
9999
0112
0114
Amount
50.54
41.58
379.76
3.80
383.56
57.53
441.09
44.11
44.10
75x100x20x2.24 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Oxidised mild steel parliamentary hinges
75x100x20x2.24 mm
Oxidised mild steel screws 30 mm
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
200.00
200.00
100 Nos
L.S.
60.00
2.73
55.00
1.70
33.00
4.64
day
day
0.14
0.14
361.00
297.00
50.54
41.58
329.76
3.30
333.06
49.96
383.02
38.30
38.30
9.59
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with
necessary screws etc. complete.
9.59.1
150 mm.
Code
0650
0682
9999
0112
0114
Description
Unit
434
Quantity
Rate
Amount
each
10.00
115.00
1150.00
100 Nos
L.S.
80.00
2.73
75.00
1.70
60.00
4.64
day
day
0.40
0.20
361.00
297.00
144.40
59.40
1418.44
14.18
1432.62
214.89
1647.51
164.75
164.75
9.59.2
Code
0651
0682
9999
0112
0114
9.59.3
Code
0652
0683
9999
0112
0114
125 mm.
Description
Unit
Quantity
Rate
Amount
each
10.00
110.00
1100.00
100 Nos
L.S.
80.00
2.73
75.00
1.70
60.00
4.64
day
day
0.40
0.20
361.00
297.00
144.40
59.40
1368.44
13.68
1382.12
207.32
1589.44
158.94
158.95
100 mm.
Description
Unit
Quantity
Rate
Amount
each
10.00
90.00
900.00
100 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
day
day
0.40
0.20
361.00
297.00
144.40
59.40
1156.44
11.56
1168.00
175.20
1343.20
134.32
134.30
9.60
Providing and fixing oxidised M.S. double acting spring hinges with necessary
screws etc. complete.
9.60.1
150 mm.
Code
0653
0682
9999
Description
Unit
435
Quantity
Rate
Amount
each
10.00
115.00
1150.00
100 Nos
L.S.
80.00
2.73
75.00
1.70
60.00
4.64
Code
0112
0114
Description
LABOUR:
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
0.40
0.20
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.60.2
Code
0654
0682
9999
0112
0114
9.60.3
Code
0655
0683
9999
0112
0114
Amount
144.40
59.40
1418.44
14.18
1432.62
214.89
1647.51
164.75
164.75
125 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Oxidised mild steel double acting spring
hinges 125 mm
Oxidised mild steel screws 50 mm
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
each
10.00
110.00
1100.00
100 Nos
L.S.
80.00
2.73
75.00
1.70
60.00
4.64
day
day
0.40
0.20
361.00
297.00
144.40
59.40
1368.44
13.68
1382.12
207.32
1589.44
158.94
158.95
100 mm.
Description
Unit
436
Quantity
Rate
Amount
each
10.00
90.00
900.00
00 Nos
L.S.
80.00
2.73
60.00
1.70
48.00
4.64
day
day
0.40
0.20
361.00
297.00
144.40
59.40
1156.44
11.56
1168.00
175.20
1343.20
134.32
134.30
9.61
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and
fixing with necessary screws etc., complete.
9.61.1
Code
0656
0686
9999
0112
0114
9.61.2
Code
7485
0686
9999
0112
0114
9.61.3
Code
7486
0686
9999
0112
Description
Unit
Quantity
Rate
Amount
metre
1.00
45.00
45.00
100 Nos
L.S.
30.00
1.82
35.00
1.70
10.50
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
135.86
1.36
137.22
20.58
157.80
157.80
Unit
Quantity
Rate
Amount
metre
1.00
42.00
42.00
100 Nos
L.S.
30.00
1.82
35.00
1.70
10.50
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
132.86
1.33
134.19
20.13
154.32
154.30
Unit
437
Quantity
Rate
Amount
metre
1.00
54.00
54.00
100 Nos
L.S.
30.00
1.82
35.00
1.70
10.50
3.09
day
0.14
361.00
50.54
Code
0114
Description
Beldar
Unit
Quantity
day
0.09
Rate
Amount
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
26.73
144.86
1.45
146.31
21.95
168.26
168.25
9.62
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and
screws etc. complete.
9.62.1
300x16 mm.
Code
Description
0660
7040
0641
9999
0112
9.62.2
250x16 mm.
Code
Description
0661
7040
0641
9999
0112
Unit
438
Rate
Amount
each
10.00
95.00
950.00
100 Nos
each
120.00
40.00
50.00
7.00
60.00
280.00
L.S.
6.37
1.70
10.83
day
0.25
361.00
90.25
1391.08
13.91
1404.99
210.75
1615.74
161.57
161.55
Unit
Quantity
Quantity
Rate
Amount
each
10.00
90.00
900.00
100 Nos
each
100.00
40.00
50.00
7.00
50.00
280.00
L.S.
6.37
1.70
10.83
day
0.25
361.00
90.25
1331.08
13.31
1344.39
201.66
1546.05
154.61
154.60
9.63
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type)
with necessary screws etc. complete.
9.63.1
250x10 mm.
Code
Description
0664
0684
9999
0112
9.63.2
200x10 mm.
Code
Description
0665
0684
9999
0112
150x10 mm.
Code
Description
0684
9999
0112
439
Rate
Amount
10.00
45.00
450.00
100 Nos
L.S.
100.00
3.64
55.00
1.70
55.00
6.19
0.10
361.00
36.10
547.29
5.47
552.76
82.91
635.67
63.57
63.55
day
Quantity
Rate
Amount
each
10.00
40.00
400.00
100 Nos
L.S.
80.00
2.73
55.00
1.70
44.00
4.64
day
0.10
361.00
36.10
484.74
4.85
489.59
73.44
563.03
56.30
56.30
Unit
Quantity
each
Unit
9.63.3
0666
Unit
Quantity
Rate
Amount
each
10.00
30.00
300.00
100 Nos
L.S.
60.00
2.73
55.00
1.70
33.00
4.64
day
0.10
361.00
36.10
Code
Description
Unit
Quantity
Rate
Amount
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.63.4
100x10 mm.
Code
Description
0667
0684
9999
0112
9.64
Code
2449
9999
0112
373.74
3.74
377.48
56.62
434.10
43.41
43.40
Unit
Quantity
Rate
Amount
each
10.00
25.00
250.00
100 Nos
L.S.
60.00
2.73
55.00
1.70
33.00
4.64
day
0.08
361.00
28.88
316.52
3.17
319.69
47.95
367.64
36.76
36.75
Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming
to IS : 7534 with necessary screws bolts, nut and washers etc. complete.
Description
Unit
440
Quantity
Rate
Amount
each
10.00
50.00
500.00
L.S.
6.37
1.70
10.83
day
0.25
361.00
90.25
601.08
6.01
607.09
91.06
698.15
69.82
69.80
9.65
Providing and fixing ISI marked oxidised MS door latches conforming to IS : 5930
with screws etc. complete.
9.65.1
300x20x6 mm.
Code
0662
0685
9999
0112
9.65.2
Code
0663
0685
9999
0112
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
48.00
45.00
1.70
480.00
40.50
6.19
day
0.12
361.00
43.32
570.01
5.70
575.71
86.36
662.07
66.21
66.20
250x20x6 mm.
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
40.00
45.00
1.70
400.00
40.50
6.19
day
0.12
361.00
43.32
490.01
4.90
494.91
74.24
569.15
56.92
56.90
9.66
2Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992
with necessary screws etc. complete.
9.66.1
125 mm.
Code
0668
0685
9999
0112
Description
Unit
441
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
2.73
19.00
45.00
1.70
190.00
18.00
4.64
day
0.06
361.00
21.66
Code
Description
Unit
Quantity
Rate
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.66.2
Code
0669
0685
9999
0112
234.30
2.34
236.64
35.50
272.14
27.21
27.20
100 mm.
Description
Unit
Quantity
Rate
Code
0670
0685
9999
0112
Amount
each
100 Nos
L.S.
10.00
40.00
1.82
16.00
45.00
1.70
160.00
18.00
3.09
day
0.06
361.00
21.66
202.75
2.03
204.78
30.72
235.50
23.55
23.55
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.66.3
Amount
75 mm.
Description
Unit
442
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
1.82
15.00
45.00
1.70
150.00
18.00
3.09
day
0.06
361.00
21.66
192.75
1.93
194.68
29.20
223.88
22.39
22.40
9.67
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS
: 363 with necessary screws etc. complete.
9.67.1
150 mm.
Code
0679
0685
9999
0112
9.67.2
Code
0680
0685
9999
0112
9.67.3
Code
0681
0685
9999
0112
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
125.00
125.00
100 Nos
L.S.
80.00
1.82
45.00
1.70
36.00
3.09
day
0.08
361.00
28.88
192.97
1.93
194.90
29.24
224.14
22.41
22.40
115 mm.
Description
Unit
Quantity
Rate
Amount
10 nos
10.00
100.00
100.00
100 Nos
L.S.
70.00
1.82
45.00
1.70
31.50
3.09
day
0.08
361.00
28.88
163.47
1.63
165.10
24.76
189.86
18.99
19.00
90 mm.
Description
Unit
443
Quantity
Rate
Amount
10 Nos
10.00
75.00
75.00
100 Nos
L.S.
70.00
1.82
45.00
1.70
31.50
3.09
day
0.08
361.00
28.88
Code
Description
Unit
Quantity
Rate
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Amount
138.47
1.38
139.85
20.98
160.83
16.08
16.10
9.68
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary
screws etc. complete.
9.68.1
Code
7063
0684
9999
0112
9.68.2
Code
7064
0685
9999
0112
Description
Unit
Quantity
Rate
Amount
each
10.00
22.00
220.00
100 Nos
L.S.
40.00
0.91
55.00
1.70
22.00
1.55
day
0.10
361.00
36.10
279.65
2.80
282.45
42.37
324.82
32.48
32.50
Unit
444
Quantity
Rate
Amount
each
10.00
20.00
200.00
100 Nos
L.S.
40.00
0.91
45.00
1.70
18.00
1.55
day
0.10
361.00
36.10
255.65
2.56
258.21
38.73
296.94
29.69
29.70
9.68.3
Code
7065
0685
9999
0112
9.69
Code
7184
0685
9999
0112
Unit
Quantity
Rate
Amount
each
10.00
18.00
180.00
100 Nos
L.S.
40.00
0.91
45.00
1.70
18.00
1.55
day
0.10
361.00
36.10
235.65
2.36
238.01
35.70
273.71
27.37
27.35
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors,
( weighting not less than 450 gms).
Description
Unit
Quantity
Rate
Amount
each
10.00
60.00
600.00
100 Nos
L.S.
60.00
0.91
45.00
1.70
27.00
1.55
day
0.10
361.00
36.10
664.65
6.65
671.30
100.70
772.00
77.20
77.20
9.70
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless
steel screws etc. complete.
9.70.1
125x64x1.90 mm.
Code
8215
8210
9999
Description
Unit
445
Quantity
Rate
Amount
10 Nos
10.00
250.00
250.00
100 Nos
L.S.
80.00
2.73
250.00
1.70
200.00
4.64
Code
0112
0114
Description
LABOUR:
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
0.14
0.09
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.70.2
Code
8216
8211
9999
0112
0114
9.70.3
Code
8217
8212
9999
0112
0114
Amount
50.54
26.73
531.91
5.32
537.23
80.58
617.81
61.78
61.80
100X58X1.90 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Stainless steel butt hinges 100x58x1.9 mm
IS: 12817 marked
Stainless steel screws 40 mm
Carriage of materials
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
230.00
230.00
100 Nos
L.S.
80.00
2.73
200.00
1.70
160.00
4.6
day
day
0.14
0.09
361.00
297.00
50.54
26.73
471.91
4.72
476.63
71.49
548.12
54.81
54.80
75x47x1.80 mm.
Description
Unit
446
Quantity
Rate
Amount
10 Nos
10.00
150.00
150.00
100 Nos
L.S.
60.00
1.82
150.00
1.70
90.00
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
320.36
3.20
323.56
48.53
372.09
37.21
37.20
9.70.4
Code
8218
8214
9999
0112
50x37x1.50 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
130.00
130.00
100 Nos
L.S.
40.00
0.91
100.00
1.70
40.00
1.55
day
0.08
361.00
28.88
200.43
2.00
202.43
30.36
232.79
23.28
23.30
9.71
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight)
with stainless steel screws etc. complete.
9.71.1
125x64x2.50 mm.
Code
8219
8210
9999
0112
0114
9.71.2
Code
8220
8211
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
330.00
330.00
100 Nos
L.S.
80.00
2.73
250.00
1.70
200.00
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
611.91
6.12
618.03
92.70
710.73
71.07
71.05
100x60x2.50 mm.
Description
Unit
447
Quantity
Rate
Amount
10 Nos
10.00
240.00
240.00
100 Nos
L.S.
80.00
2.73
200.00
1.70
160.00
4.64
Code
0112
0114
Description
LABOUR:
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
0.14
0.09
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.71.3
Code
8221
8212
9999
0112
0114
Amount
50.54
26.73
481.91
4.82
486.73
73.01
559.74
55.97
55.95
75x50x2.50 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Stainless steel butt hinges (heavy weight)
75x50x2.5 mm IS : 12817 marked
Stainless steel screws 30 mm
Carriage of materials
LABOUR:
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
195.00
195.00
100 Nos
L.S.
60.00
1.82
150.00
1.70
90.00
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
365.36
3.65
369.01
55.35
424.36
42.44
42.45
9.72
Providing and fixing bright finished brass butt hinges with necessary screws etc.
complete.
9.72.1
Code
0382
0449
9999
0111
0114
Description
Unit
448
Quantity
Rate
Amount
10 Nos
10.00
3100.00
3100.00
100 Nos
L.S.
100.00
3.64
210.00
1.70
210.00
6.19
0.14
0.10
393.00
297.00
55.02
29.70
3400.91
34.01
3434.92
515.24
3950.16
395.02
395.00
day
day
9.72.2
Code
0378
0449
9999
0111
0114
9.72.3
Code
0383
0450
9999
0111
0114
9.72.4
Code
0379
0450
9999
0111
0114
Unit
Quantity
Rate
Amount
10 Nos
10.00
850.00
850.00
100 Nos
L.S.
100.00
3.64
210.00
1.70
210.00
6.19
0.14
0.10
393.00
297.00
55.02
29.70
1150.91
11.51
1162.42
174.36
1336.78
133.68
133.70
day
day
Unit
Quantity
Rate
Amount
10 Nos
10.00
2750.00
2750.00
100 Nos
L.S.
80.00
2.73
170.00
1.70
136.00
4.64
day
day
0.14
0.10
393.00
297.00
55.02
29.70
2975.36
29.75
3005.11
450.77
3455.88
345.59
345.60
Unit
449
Quantity
Rate
Amount
10 Nos
10.00
700.00
700.00
100 Nos
L.S.
80.00
2.73
170.00
1.70
136.00
4.64
day
day
0.14
0.10
393.00
297.00
55.02
29.70
Code
Description
Unit
Quantity
Rate
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.72.5
Code
0384
0451
9999
0111
0114
9.72.6
Code
0380
0451
9999
0111
0114
Amount
925.36
9.25
934.61
140.19
1074.80
107.48
107.50
Unit
Quantity
Rate
Amount
10 Nos
10.00
950.00
950.00
100 Nos
L.S.
60.00
2.73
135.00
1.70
81.00
4.64
day
day
0.14
0.10
393.00
297.00
55.02
29.70
1120.36
11.20
1131.56
169.73
1301.29
130.13
130.15
Unit
450
Quantity
Rate
Amount
10 Nos
10.00
430.00
430.00
100 Nos
L.S.
60.00
2.73
135.00
1.70
81.00
4.64
day
day
0.14
0.10
393.00
297.00
55.02
29.70
600.36
6.00
606.36
90.95
697.31
69.73
69.75
9.72.7
Code
0381
0453
9999
0111
Unit
Quantity
Rate
Amount
10 Nos
10.00
180.00
180.00
100 Nos
L.S.
40.00
1.82
90.00
1.70
36.00
3.09
day
0.08
393.00
31.44
250.53
2.51
253.04
37.96
291.00
29.10
29.10
9.73
Providing and fixing bright finished brass parliamentary hinges with necessary
screws etc. complete.
9.73.1
150x125x27x5 mm.
Code
0385
0450
9999
0111
0114
9.73.2
Code
0386
0450
9999
0111
Description
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
2850.00
170.00
1.70
2850.00
136.00
4.64
day
day
0.14
0.14
393.00
297.00
55.02
41.58
3087.24
30.87
3118.11
467.72
3585.83
358.58
358.60
125x125x27x5 mm.
Description
Unit
451
Quantity
Rate
Amount
10 Nos
10.00
2500.00
2500.00
100 Nos
L.S.
80.00
2.73
170.00
1.70
136.00
4.64
day
0.14
393.00
55.02
Code
0114
Description
Beldar
Unit
Quantity
day
0.14
Unit
Quantity
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.73.3
Code
0387
0450
9999
0111
0114
9.73.4
Code
0388
0451
9999
0111
0114
Amount
41.58
2737.24
27.37
2764.61
414.69
3179.30
317.93
317.95
100x125x27x5 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Brass parliamentary hinges 100x125x
27x5 mm
Brass screws 40 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
2300.00
2300.00
100 Nos
L.S.
80.00
2.73
170.00
1.70
136.00
4.64
day
day
0.14
0.14
393.00
297.00
55.02
41.58
2537.24
25.37
2562.61
384.39
2947.00
294.70
294.70
75x100x20x3.2 mm.
Description
Unit
452
Quantity
Rate
Amount
10 Nos
10.00
1750.00
1750.00
100 Nos
L.S.
60.00
2.73
135.00
1.70
81.00
4.64
day
day
0.14
0.14
393.00
297.00
55.02
41.58
1932.24
19.32
1951.56
292.73
2244.29
224.43
224.45
9.74
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete.
9.74.1
250x10 mm.
Code
Description
0400
0451
9999
0111
9.74.2
200x10 mm.
Code
Description
0401
0451
9999
0111
150x10 mm.
Code
Description
0111
day
453
Quantity
Rate
Amount
10.00
100.00
4.55
230.00
135.00
1.70
2300.00
135.00
7.74
0.10
393.00
39.30
2482.04
24.82
2506.86
376.03
2882.89
288.29
288.30
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
80.00
2.73
180.00
135.00
1.70
1800.00
108.00
4.64
day
0.10
393.00
39.30
1951.94
19.52
1971.46
295.72
2267.18
226.72
226.70
Unit
each
100 Nos
L.S.
Unit
9.74.3
0402
0451
9999
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
80.00
2.73
145.00
135.00
1.70
1450.00
108.00
4.64
day
0.10
393.00
39.30
1601.94
16.02
1617.96
242.69
1860.65
186.07
186.05
9.74.4
100x10 mm.
Code
Description
0403
0451
9999
0111
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
2.73
95.00
135.00
1.70
950.00
81.00
4.64
day
0.10
393.00
39.30
1074.94
10.75
1085.69
162.85
1248.54
124.85
124.85
9.75
Providing and fixing bright finished brass door latch with necessary screws etc.
complete.
9.75.1
300x16x5 mm.
Code
0411
0452
9999
0111
9.75.2
Code
0412
0452
9999
0111
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
165.00
95.00
1.70
1650.00
85.50
6.19
day
0.12
393.00
47.16
1788.85
17.89
1806.74
271.01
2077.75
207.78
207.80
250x16x5 mm.
Description
Unit
454
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
160.00
95.00
1.70
1600.00
85.50
6.19
day
0.12
393.00
47.16
1738.85
Code
Description
Unit
Quantity
Rate
9.76
Code
0413
0111
9999
9.77
Code
0414
0111
9999
Amount
17.39
1756.24
263.44
2019.68
201.97
201.95
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
Description
Unit
Quantity
Rate
Amount
each
1.00
370.00
370.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
443.00
4.43
447.43
67.11
514.54
514.55
Providing and fixing bright finished brass 100 mm mortice latch with one dead
bolt and a pair of lever handles of approved quality with necessary screws etc.
complete.
Description
Unit
455
Quantity
Rate
Amount
each
1.00
320.00
320.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
393.00
3.93
396.93
59.54
456.47
456.45
9.78
Code
0438
0111
9999
Providing and fixing bright finished brass night latch of approved quality including
necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
1.00
495.00
495.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
568.00
5.68
573.68
86.05
659.73
659.75
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
9.79
Providing and fixing special quality bright finished brass cupboard or ward robe
locks with four levers of approved quality including necessary screws etc.
complete.
9.79.1
40 mm.
Code
2451
0111
9999
9.79.2
Code
2452
0111
9999
Description
Unit
Quantity
Rate
Amount
each
1.00
70.00
70.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
143.00
1.43
144.43
21.66
166.09
166.10
50 mm.
Description
Unit
456
Quantity
Rate
Amount
each
1.00
75.00
75.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
148.00
1.48
149.48
22.42
171.90
171.90
9.79.3
Code
2453
0111
9999
9.79.4
Code
2454
0111
9999
9.80
Code
0447
9999
0111
65 mm.
Description
Unit
Quantity
Rate
Amount
each
1.00
80.00
80.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
153.00
1.53
154.53
23.18
177.71
177.70
75 mm.
Description
Unit
Quantity
Rate
Amount
each
1.00
100.00
100.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
173.00
1.73
174.73
26.21
200.94
200.95
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of
approved quality with necessary screws.
Description
Unit
457
Quantity
Rate
Amount
each
L.S.
10.00
2.73
35.00
1.70
350.00
4.64
day
0.14
393.00
55.02
409.66
4.10
413.76
62.06
475.82
47.58
47.60
9.81
Providing and fixing bright finished brass handles with screws etc. complete.
9.81.1
125 mm.
Code
0408
0452
9999
0111
9.81.2
Code
0409
0452
9999
0111
9.81.3
Code
0410
0452
9999
0111
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
2.73
140.00
95.00
1.70
1400.00
38.00
4.64
day
0.06
393.00
23.58
1466.22
14.66
1480.88
222.13
1703.01
170.30
170.30
100 mm.
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
130.00
95.00
1.70
1300.00
38.00
1.55
day
0.06
393.00
23.58
1363.13
13.63
1376.76
206.51
1583.27
158.33
158.35
75 mm.
Description
Unit
458
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
100.00
95.00
1.70
1000.00
38.00
1.55
day
0.06
393.00
23.58
1063.13
10.63
1073.76
161.06
1234.82
123.48
123.50
9.82
Code
2455
0452
9999
0111
9.83
Code
2456
0451
9999
0112
Providing and fixing bright finished brass hanging type floor door stopper with
necessary screws, etc. complete.
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
20.00
2.73
65.00
95.00
1.70
650.00
19.00
4.64
day
0.03
393.00
11.79
685.43
6.85
692.28
103.84
796.12
79.61
79.60
Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws
etc. complete.
Description
Unit
459
Quantity
Rate
Amount
each
10.00
590.00
5900.00
100 Nos
L.S.
60.00
3.64
135.00
1.70
81.00
6.19
day
1.00
361.00
361.00
6348.19
63.48
6411.67
961.75
7373.42
737.34
737.35
9.84
Code
7060
0451
9999
0112
9.85
Code
0423
0452
9999
0111
Providing and fixing aluminium extruded section body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with
double speed adjustment with necessary accessories and screws etc. complete.
Description
Details of cost for 10 nos.
MATERIAL:
Hydraulic door closer tubular type Aluminium
section body
Brass screws 30 mm
Carriage of materials
LABOUR:
Carpenter 2nd class
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Unit
Quantity
Rate
Amount
each
10.00
840.00
8400.00
100 Nos
L.S.
60.00
1.00
135.00
1.70
81.00
1.70
day
1.00
361.00
361.00
8843.70
88.44
8932.14
1339.82
10271.96
1027.20
1027.20
Providing and fixing bright finished brass casement window fastener with
necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
50.00
95.00
1.70
500.00
38.00
1.55
day
0.10
393.00
39.30
578.85
5.79
584.64
87.70
672.34
67.23
67.25
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.86
Providing and fixing bright finished brass casement stays (straight peg type) with
necessary screws etc. complete.
9.86.1
Code
0424
Description
Details of cost for 10 nos.
MATERIAL:
Brass casement stays (straight peg type)
300 mm weighing not less than 0.33 kg
460
Unit
Quantity
each
10.00
Rate
135.00
Amount
1350.00
Code
0451
9999
0111
Description
Unit
Brass screws 30 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
Quantity
Rate
100 Nos
L.S.
40.00
0.91
135.00
1.70
54.00
1.55
day
0.10
393.00
39.30
1444.85
14.45
1459.30
218.90
1678.20
167.82
167.80
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.86.2
Code
0425
0452
9999
0111
9.86.3
Code
0426
0452
9999
Amount
Rate
Amount
each
10.00
110.00
1100.00
100 Nos
L.S.
40.00
0.91
95.00
1.70
38.00
1.55
day
0.10
393.00
39.30
1178.85
11.79
1190.64
178.60
1369.24
136.92
136.90
Unit
461
Quantity
Rate
Amount
each
10.00
100.00
1000.00
100 Nos
L.S.
40.00
0.91
95.00
1.70
38.00
1.55
Code
0111
Description
LABOUR:
Carpenter 1 st class
Unit
Quantity
day
0.10
Rate
393.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Amount
39.30
1078.85
10.79
1089.64
163.45
1253.09
125.31
125.30
9.87
Providing and fixing bright finished brass hasp and staple (safety type) with
necessary screws etc. complete.
9.87.1
150 mm.
Code
0431
0452
9999
0111
9.87.2
Code
0432
0453
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
775.00
775.00
100 Nos
L.S.
80.00
1.82
95.00
1.70
76.00
3.09
day
0.08
393.00
31.44
885.53
8.86
894.39
134.16
1028.55
102.86
102.85
115 mm.
Description
Unit
462
Quantity
Rate
Amount
10 Nos
10.00
650.00
650.00
100 Nos
L.S.
70.00
1.82
90.00
1.70
63.00
3.09
Code
0111
Description
LABOUR:
Carpenter 1 st class
Unit
Quantity
day
0.08
Unit
Quantity
Rate
393.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.87.3
Code
0433
0453
9999
0111
9.88
Code
0558
0111
9999
Amount
31.44
747.53
7.48
755.01
113.25
868.26
86.83
86.85
90 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Brass hasps and staples (safety type) 90 mm
Brass screws 20 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
70.00
1.82
560.00
90.00
1.70
560.00
63.00
3.09
day
0.08
393.00
31.44
657.53
6.58
664.11
99.62
763.73
76.37
76.35
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6
levers and a pair of lever handles of approved quality with necessary screws etc.
complete.
Description
Unit
463
Quantity
Rate
Amount
each
1.00
540.00
540.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
613.00
6.13
619.13
92.87
712.00
712.00
9.89
Code
0583
0111
9999
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
1.00
530.00
530.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
603.00
6.03
609.03
91.35
700.38
700.40
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
9.90
Providing and fixing special quality chromium plated brass cupboard locks with
six levers of approved quality including necessary screws etc. complete.
9.90.1
Size 40 mm.
Code
Description
2468
0111
9999
9.90.2
Size 50 mm.
Code
Description
2469
0111
9999
Unit
464
Rate
Amount
each
1.00
65.00
65.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
138.00
1.38
139.38
20.91
160.29
160.30
Unit
Quantity
Quantity
Rate
Amount
each
1.00
75.00
75.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
148.00
1.48
149.48
22.42
171.90
171.90
9.90.3
Size 65 mm.
Code
Description
2470
0111
9999
9.90.4
Size 75 mm.
Code
Description
2471
0111
9999
9.91
Code
0584
9999
0111
Unit
Rate
Amount
each
1.00
85.00
85.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
158.00
1.58
159.58
23.94
183.52
183.50
Unit
Quantity
Quantity
Rate
Amount
each
1.00
110.00
110.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
183.00
1.83
184.83
27.72
212.55
212.55
Unit
465
Quantity
Rate
Amount
each
10.00
48.00
480.00
L.S.
2.73
1.70
4.64
day
0.14
393.00
55.02
539.66
5.40
545.06
81.76
626.82
62.68
62.70
9.92
Providing and fixing chromium plated brass handles with necessary screws etc.
complete.
9.92.1
125 mm.
Code
0555
0452
9999
0111
9.92.2
Code
0556
0452
9999
0111
9.92.3
Code
0557
0452
9999
Description
Unit
Quantity
Rate
Amount
each
10.00
175.00
1750.00
100 Nos
L.S.
40.00
2.73
95.00
1.70
38.00
4.64
day
0.06
393.00
23.58
1816.22
18.16
1834.38
275.16
2109.54
210.95
210.95
100 mm.
Description
Unit
Quantity
Rate
Amount
each
10.00
150.00
1500.00
100 Nos
L.S.
40.00
0.91
95.00
1.70
38.00
1.55
day
0.06
393.00
23.58
1563.13
15.63
1578.76
236.81
1815.57
181.56
181.55
75 mm.
Description
Unit
466
Quantity
Rate
Amount
each
10.00
130.00
1300.00
100 Nos
L.S.
40.00
0.91
95.00
1.70
38.00
1.55
Code
0111
Description
LABOUR:
Carpenter 1 st class
Unit
Quantity
day
0.06
Rate
393.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.93
Code
0568
0588
9999
0111
Amount
23.58
1363.13
13.63
1376.76
206.51
1583.27
158.33
158.35
Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
10.00
95.00
950.00
100 Nos
L.S.
40.00
0.91
120.00
1.70
48.00
1.55
day
0.10
393.00
39.30
1038.85
10.39
1049.24
157.39
1206.63
120.66
120.65
9.94
Providing and fixing chromium plated brass casement stays (straight peg type)
with necessary screws etc. complete.
9.94.1
Code
0569
0588
9999
0111
Description
Unit
467
Quantity
Rate
Amount
each
10.00
150.00
1500.00
100 Nos
L.S.
40.00
0.91
120.00
1.70
48.00
1.55
day
0.10
393.00
39.30
1588.85
15.89
1604.74
240.71
1845.45
184.55
184.55
9.94.2
Code
0570
0588
9999
0111
9.94.3
Code
0571
0588
9999
0111
Unit
Quantity
Rate
Amount
each
10.00
130.00
1300.00
100 Nos
L.S.
40.00
0.91
120.00
1.70
48.00
1.55
day
0.10
393.00
39.30
1388.85
13.89
1402.74
210.41
1613.15
161.32
161.30
Unit
Quantity
Rate
Amount
each
10.00
115.00
1150.00
100 Nos
L.S.
40.00
0.91
120.00
1.70
48.00
1.55
day
0.10
393.00
39.30
1238.85
12.39
1251.24
187.69
1438.93
143.89
143.90
9.95
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour
or shade with necessary screws etc. complete.
9.95.1
Code
0687
0585
9999
Description
Unit
468
Quantity
Rate
Amount
10 Nos
10.00
570.00
570.00
100 Nos
L.S.
100.00
3.64
240.00
1.70
240.00
6.19
Code
0111
0114
Description
LABOUR:
Carpenter 1 st class
Beldar
Unit
Quantity
day
day
0.14
0.09
Unit
Quantity
Rate
393.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.95.2
Code
0688
0585
9999
0111
0114
9.95.3
Code
0689
0586
9999
0111
0114
Amount
55.02
26.73
897.94
8.98
906.92
136.04
1042.96
104.30
104.30
125 x 63 x 4 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Anodised Aluminium butt hinges 125x63x4 mm
Chromium plated Brass screws 50 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
10 Nos
100 Nos
L.S.
day
day
Rate
Amount
10.00
100.00
3.64
530.00
240.00
1.70
530.00
240.00
6.19
0.14
0.09
393.00
297.00
55.02
26.73
857.94
8.58
866.52
129.98
996.50
99.65
99.65
100 x 75 x 4 mm.
Description
Unit
469
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
520.00
200.00
1.70
520.00
160.00
4.64
day
day
0.14
0.09
393.00
297.00
55.02
26.73
766.39
7.66
774.05
116.11
890.16
89.02
89.00
9.95.4
Code
0691
0586
9999
0111
0114
9.95.5
Code
0690
0586
9999
0111
0114
9.95.6
Code
0692
0587
9999
0111
100 x 63 x 4 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
510.00
200.00
1.70
510.00
160.00
4.64
day
day
0.14
0.09
393.00
297.00
55.02
26.73
756.39
7.56
763.95
114.59
878.54
87.85
87.85
Unit
Quantity
Rate
Amount
10 Nos
10.00
500.00
500.00
100 Nos
L.S.
80.00
2.73
200.00
1.70
160.00
4.64
day
day
0.14
0.09
393.00
297.00
55.02
26.73
746.39
7.46
753.85
113.08
866.93
86.69
86.70
75 x 63 x 4 mm.
Description
Unit
470
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
500.00
155.00
1.70
500.00
93.00
3.09
day
0.14
393.00
55.02
Code
0114
Description
Beldar
Unit
Quantity
day
0.09
Unit
Quantity
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.95.7
Code
0693
0587
9999
0111
0114
9.95.8
Code
0694
0587
9999
0111
0114
Amount
26.73
677.84
6.78
684.62
102.69
787.31
78.73
78.75
75 x 63 x 3.2 mm.
Description
Details of cost for 10 nos.
MATERIAL:
Anodised Aluminium butt hinges 75x63x
3.2 mm
Chromium plated Brass screws 30 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
470.00
470.00
100 Nos
L.S.
60.00
1.82
155.00
1.70
93.00
3.09
day
day
0.14
0.09
393.00
297.00
55.02
26.73
647.84
6.48
654.32
98.15
752.47
75.25
75.25
75 x 45 x 3.2 mm.
Description
Unit
471
Quantity
Rate
Amount
10 nos
10.00
390.00
390.00
100 Nos
L.S.
60.00
1.82
155.00
1.70
93.00
3.09
day
day
0.14
0.09
393.00
297.00
55.02
26.73
567.84
5.68
573.52
86.03
659.55
65.96
65.95
9.96
Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete.
9.96.1
300 x 16 mm.
Code
Description
0696
0588
9999
0111
9.96.2
250 x 16 mm.
Code
Description
0697
0588
9999
0111
Unit
Rate
Amount
each
10.00
160.00
1600.00
100 Nos
L.S.
40.00
5.46
120.00
1.70
48.00
9.28
day
0.50
393.00
196.50
1853.78
18.54
1872.32
280.85
2153.17
215.32
215.30
Unit
Quantity
Quantity
Rate
Amount
each
10.00
130.00
1300.00
100 Nos
L.S.
40.00
5.46
120.00
1.70
48.00
9.28
day
0.50
393.00
196.50
1553.78
15.54
1569.32
235.40
1804.72
180.47
180.45
9.97
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating
not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour
or shade, with necessary screws etc. complete.
9.97.1
300 x 10 mm.
Code
Description
0698
Unit
472
10 Nos
Quantity
10.00
Rate
750.00
Amount
750.00
Code
0587
9999
0111
Description
Chromium plated Brass screws 30 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.97.2
250 x 10 mm.
Code
Description
0699
0587
9999
0111
9.97.3
200 x 10 mm.
Code
Description
0700
0587
9999
0111
Unit
473
Rate
Amount
100 Nos
L.S.
80.00
4.42
155.00
1.70
124.00
7.51
day
0.125
393.00
49.12
930.63
9.31
939.94
140.99
1080.93
108.09
108.10
Unit
Quantity
Rate
Amount
10 Nos
10.00
600.00
600.00
100 Nos
L.S.
80.00
4.42
155.00
1.70
124.00
7.51
day
0.125
393.00
49.12
780.63
7.81
788.44
118.27
906.71
90.67
90.65
Unit
Quantity
Quantity
Rate
Amount
10 Nos
10.00
480.00
480.00
100 Nos
L.S.
80.00
2.73
155.00
1.70
124.00
4.64
day
0.125
393.00
49.12
657.76
6.58
664.34
99.65
763.99
76.40
76.40
9.97.4
150 x 10 mm.
Code
Description
0701
0587
9999
0111
9.97.5
100 x 10 mm.
Code
Description
0702
0587
9999
0111
9.98
Code
2464
9999
Unit
Rate
Amount
10 Nos
10.00
380.00
380.00
100 Nos
L.S.
80.00
2.73
155.00
1.70
124.00
4.64
day
0.08
393.00
31.44
540.08
5.40
545.48
81.82
627.30
62.73
62.75
Unit
Quantity
Quantity
Rate
Amount
10 Nos
10.00
300.00
300.00
100 Nos
L.S.
60.00
2.73
155.00
1.70
93.00
4.64
day
0.08
393.00
31.44
429.08
4.29
433.37
65.01
498.38
49.84
49.85
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating
not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour
and shade, with necessary screws bolts, nut and washers etc. complete.
Description
Unit
474
Quantity
Rate
Amount
each
10.00
50.00
500.00
L.S.
6.37
1.70
10.83
Code
0112
Description
LABOUR:
Carpenter 2nd class
Unit
Quantity
day
0.25
Rate
361.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.99
Code
0706
0588
9999
0111
0114
9.100
Amount
90.25
601.08
6.01
607.09
91.06
698.15
69.82
69.80
Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm,
anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent
or dyed to required colour or shade, with necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
10.00
130.00
1300.00
100 Nos
L.S.
40.00
5.46
120.00
1.70
48.00
9.28
day
day
0.07
0.05
393.00
297.00
27.51
14.85
1399.64
14.00
1413.64
212.05
1625.69
162.57
162.55
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete.
0703
0588
9999
Description
Unit
475
Quantity
Rate
Amount
10 Nos
10.00
500.00
500.00
100 Nos
L.S.
40.00
2.73
120.00
1.70
48.00
4.64
Code
0111
Description
LABOUR:
Carpenter 1 st class
Unit
Quantity
day
0.06
Unit
Quantity
Rate
393.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Amount
23.58
576.22
5.76
581.98
87.30
669.28
66.93
66.95
0704
0588
9999
0111
Description
Details of cost for 10 nos.
MATERIAL:
Anodised Aluminium handles 100 mm with
plate 150 x 32 mm
Chromium plated Brass screws 25 mm
Carriage of materials
LABOUR:
Carpenter 1 st class
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
380.00
380.00
100 Nos
L.S.
40.00
1.82
120.00
1.70
48.00
3.09
day
0.06
393.00
23.58
454.67
4.55
459.22
68.88
528.10
52.81
52.80
9.100.3 75 mm.
Code
0705
0589
9999
0111
Description
Unit
476
Quantity
Rate
Amount
10 Nos
10.00
320.00
320.00
100 nos
L.S.
40.00
1.82
100.00
1.70
40.00
3.09
day
0.06
393.00
23.58
386.67
3.87
390.54
58.58
449.12
44.91
44.90
9.101
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to
required colour and shade, with necessary screws etc. complete.
2459
0588
9999
0111
Description
Unit
Quantity
Rate
Amount
each
10.00
25.00
250.00
100 Nos
L.S.
20.00
2.73
120.00
1.70
24.00
4.64
day
0.03
393.00
11.79
290.43
2.90
293.33
44.00
337.33
33.73
33.75
7059
0588
9999
0111
9.102
Code
2465
Description
Unit
Quantity
Rate
Amount
each
10.00
65.00
650.00
100 Nos
L.S.
20.00
2.73
120.00
1.70
24.00
4.64
day
0.03
393.00
11.79
690.43
6.90
697.33
104.60
801.93
80.19
80.20
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour and shade, with necessary screws etc. complete.
Description
Unit
477
each
Quantity
10.00
Rate
50.00
Amount
500.00
Code
0588
9999
0111
9.103
Code
7001
7003
0111
9999
9.104
Code
7056
9999
9999
Description
Unit
Quantity
Rate
Amount
100 Nos
L.S.
40.00
0.91
120.00
1.70
48.00
1.55
day
0.10
393.00
39.30
588.85
5.89
594.74
89.21
683.95
68.40
68.40
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI
marked, with six levers and a pair of anodised (anodic coating not less than grade
AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary
screws etc. complete .
Description
Unit
Quantity
Rate
Amount
each
1.00
260.00
260.00
each
1.00
315.00
315.00
day
L.S.
0.17
4.55
393.00
1.70
66.81
7.74
649.55
6.50
656.05
98.41
754.46
754.45
Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end
in pelmets as curtain rod.
Description
Unit
478
Quantity
Rate
Amount
metre
2.00
50.00
100.00
L.S.
L.S.
2.73
1.43
1.70
1.70
4.64
2.43
107.07
1.07
108.14
16.22
124.36
62.18
62.20
9.105
Providing and fixing partition upto ceiling height consisting of G.I. frame and
required board, including providing and fixing of frame work made of special section
power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side
inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges
of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm
centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable
anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having
one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically
within flanges of floor and ceiling channel and placed at a spacing of 610 mm
centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both
ends of partition fixed flush to wall with suitable anchor fastener or metal screws
with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to
both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling
channels at the spacing of 300 mm centre to centre. The boards are to be fixed to
the frame work with joints staggered to avoid through cracks, M.S. fixing channel
of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at
the horizontal joints of two boards, fixed to the studs using metal to metal flat
head screws, including jointing and finishing to a flush finish with recommended
jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x
0.5 mm), joint finisher and two coats of primer suitable for board as per
manufacture's specification and direction of engineer in charge all complete.
9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board
conforming to IS: 2095: part I.
Code
7366
7367
7369
7020
7388
7048
0869
0763
7018
Description
Unit
479
Quantity
Rate
Amount
sqm
43.80
240.00
10512.00
metre
12.00
60.00
720.00
metre
40.15
75.00
3011.25
100 Nos
392.00
60.00
235.20
each
22.00
50.00
1100.00
each
18.00
10.00
180.00
kilogram
19.27
4.00
77.08
kilogram
4.82
68.00
327.76
roll
0.584
145.00
84.68
Code
7021
1022
1211
9999
9999
0111
0112
0131
0114
Description
Primer ( for gypsum board)
(36/100)21.90 = 7.88 litre
Galvanised steel bolts & nuts 6 mm dia and
25 mm long round head with slots
11x2x2=44
G.I. plain washer for seam bolts
Sundries and carriage
Sundries scaffolding
Labour for 21.90 sqm.
Carpenter 1 st class
0.3x21.90
Carpenter 2nd class
0.13x21.90
Painter
0.05x21.90
Beldar
0.35x21.90
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 21.9 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
litre
7.88
85.00
669.80
10 Nos
44.00
25.00
110.00
100 Nos
L.S.
L.S.
44.00
52.00
130.00
30.00
1.70
1.70
13.20
88.40
221.00
day
6.57
393.00
2582.01
day
2.847
361.00
1027.77
day
1.095
361.00
395.30
day
7.665
297.00
2276.50
23631.95
236.32
23868.27
3580.24
27448.51
1253.36
1253.35
9.105.2 75 mm overall thickness partition with 12.5 mm thick double skin tapered edged
plain Gypsum board conforming to IS: 2095: part I.
Code
8717
7367
7369
7020
7388
7048
0869
Description
Unit
480
Quantity
Rate
Amount
sqm
43.80
170.00
7446.00
metre
12.00
60.00
720.00
metre 4
0.15
75.00
3011.25
100 Nos
392.00
60.00
235.20
each
22.00
50.00
1100.00
each
18.00
10.00
180.00
kilogram
19.27
4.00
77.08
Code
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Description
Unit
Glue
kilogram
(22/100)x21.90=4.82
Joint tape roll
roll
(120m roll) (300/100)x21.90/120 = 0.584 Nos.
Primer ( for gypsum board)
litre
(36/100)21.90 = 7.88 litre
Galvanised steel bolts & nuts 6 mm dia
10 Nos
and 25 mm long round head with slots
11x2x2=44
G.I. plain washer for seam bolts
100 Nos
Sundries carriage
L.S.
Sundries scaffolding
L.S.
Labour for 21.90 sqm.
Carpenter 1 st class
day
0.3x21.90
Carpenter 2nd class
day
0.13x21.90
Painter
day
0.05x21.90
Beldar
day
0.35x21.90
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 21.9 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
4.82
68.00
327.76
0.584
145.00
84.68
7.88
85.00
669.80
44.00
25.00
110.00
44.00
52.00
130.00
30.00
1.70
1.70
13.20
88.40
221.00
6.57
393.00
2582.01
2.847
361.00
1027.77
1.095
361.00
395.30
7.665
297.00
2276.50
20565.95
205.66
20771.61
3115.74
23887.35
1090.75
1090.75
9.105.3 66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate
Board made with Calcareous & Siliceous materials reinforced with cellulose fiber
manufactured through autoclaving process with Compressive Strength 225 kg/sq
cm, Bending Strength 100 kg/ sq cm.
Code
8699
7367
7369
7020
Description
Unit
481
Quantity
Rate
Amount
sqm
43.80
368.00
10512.00
metre
12.00
60.00
720.00
metre
40.15
75.00
3011.25
100 Nos
392.00
60.00
235.20
Code
7388
7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Description
Unit
Quantity
Rate
Amount
each
22.00
50.00
1100.00
each
18.00
10.00
180.00
kilogram
19.27
4.00
77.08
kilogram
4.82
68.00
327.76
roll
0.584
145.00
84.68
litre
7.88
85.00
669.80
10 Nos
44.00
25.00
110.00
100 Nos
L.S.
L.S.
44.00
52.00
130.00
30.00
1.70
1.70
13.20
88.40
221.00
day
6.57
393.00
2582.01
day
2.847
361.00
1027.77
day
1.095
361.00
395.30
day
7.665
297.00
2276.50
23631.95
236.32
23868.27
3580.24
27448.51
1253.36
1550.75
9.105.4 66 mm overall thickness partition using 8 mm thick double skin non- asbestos
multipurpose cement board reinforced with cellulose fibre manufactured through
autoclaving process (High pressure steam cured) as per IS: 14862 with suitable
fibre cement screws.
Code
0237
7367
Description
Unit
482
Quantity
Rate
Amount
sqm
43.80
250.00
10950.00
metre
12.00
60.00
720.00
Code
7369
7020
7388
7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
9.106
Description
Unit
Quantity
Rate
Amount
metre
40.15
75.00
3011.25
100 Nos
392.00
60.00
235.20
each
22.00
50.00
1100.00
each
18.00
10.00
180.00
kilogram
19.27
4.00
77.08
kilogram
4.82
68.00
327.76
roll
0.584
145.00
84.68
litre
7.88
85.00
669.80
10 Nos
44.00
25.00
110.00
100 Nos
L.S.
L.S.
44.00
52.00
130.00
30.00
1.70
1.70
13.20
88.40
221.00
day
6.57
393.00
2582.01
day
2.847
361.00
1027.77
day
1.095
361.00
395.30
day
7.665
297.00
2276.50
24069.95
240.70
24310.65
3646.60
27957.25
1276.59
1276.60
Providing and fixing PTMT handles with necessary screws etc. complete.
7512
0639
9999
Description
Unit
483
Quantity
Rate
Amount
each
100 Nos
10.00
40.00
30.00
35.00
300.00
14.00
L.S.
2.73
1.70
4.64
Code
0112
Description
LABOUR :
Carpenter 2nd class
Unit
Quantity
day
0.06
Rate
361.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos.
Cost of each
Say
Amount
21.66
340.30
3.40
343.70
51.56
395.26
39.53
39.55
7513
0639
9999
0112
9.107
Description
Unit
Quantity
Rate
Amount
each
100 Nos
10.00
40.00
34.00
35.00
340.00
14.00
L.S.
2.73
1.70
4.64
day
0.06
361.00
21.66
380.30
3.80
384.10
57.62
441.72
44.17
44.15
Providing and fixing PTMT Butt hinges with necessary screws etc. complete.
9.107.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less
than 34 gms.
Code
7514
0638
9999
0112
0114
Description
Unit
484
Quantity
Rate
Amount
each
100 nos
10.00
60.00
42.00
40.00
420.00
24.00
L.S.
1.82
1.70
3.09
day
day
0.14
0.09
361.00
297.00
50.54
26.73
524.36
5.24
529.60
79.44
609.04
60.90
60.90
9.107.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than
53 gms.
Code
7515
0637
9999
0112
0114
9.108
Description
Unit
Quantity
Rate
Amount
each
100 nos
10.00
80.00
56.00
50.00
560.00
40.00
L.S.
2.73
1.70
4.64
day
day
0.14
0.09
361.00
297.00
50.54
26.73
681.91
6.82
688.73
103.31
792.04
79.20
79.20
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and
necessary screws etc., complete.
7516
0638
9999
0112
Description
Unit
Quantity
Rate
Amount
each
100 nos
10.00
60.00
65.00
40.00
650.00
24.00
L.S.
2.73
1.70
4.64
day
0.08
361.00
28.88
707.52
7.08
714.60
107.19
821.79
82.18
82.20
7517
0638
Description
Unit
485
each
100 nos
Quantity
10.00
80.00
Rate
80.00
40.00
Amount
800.00
32.00
Code
9999
0112
Description
Unit
Carriage of materials
LABOUR :
Carpenter 2nd class
Quantity
Rate
L.S.
2.73
1.70
4.64
day
0.10
361.00
36.10
872.74
8.73
881.47
132.22
1013.69
101.37
101.35
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.109
Code
7518
0639
9999
0111
9.110
Code
0305
9999
Amount
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with
suitable washers weighing not less than 33 gms.
Description
Unit
Quantity
Rate
Amount
each
100 Nos
10.00
20.00
27.00
35.00
270.00
7.00
L.S.
2.73
1.70
4.64
day
0.03
393.00
11.79
293.43
2.93
296.36
44.45
340.81
34.08
34.10
Unit
score
L.S.
486
Quantity
0.966
4.83
Rate
350.00
1.70
Amount
338.10
8.21
Code
2466
2204
9999
0112
0114
9999
9.111
Description
Unit
10 cudm
Quantity
Rate
Amount
3.94
325.00
128.05
cum
L.S.
0.00394
20.25
121.88
1.70
0.48
34.42
day
day
L.S.
0.25
0.25
10.05
361.00
297.00
1.70
90.25
74.25
17.08
690.84
6.91
697.75
104.66
802.41
382.10
382.10
Providing and fixing wooden moulded corner beading of triangular shape to the
junction of panelling etc. with iron screws, plugs and priming coat on unexposed
surface etc. complete 2nd class teak wood.
1190
2204
0637
13.50.1
0111
Description
Unit
487
dm
cum
100 nos
Quantity
Rate
Amount
6.88
0.00688
6.00
725.00
121.88
50.00
498.80
0.84
3.00
sqm
0.50
30.75
15.38 A
day
0.75
393.00
294.75
812.77
7.97
820.74
120.80
941.54
188.31
188.30
9.112
Code
8719
0112
0114
9.113
Code
8716
0111
9999
9.114
Providing and fixing 2nd class teak wood lipping / moulded beading or taj beading of
size 18X5 mm fixed with wooden adhesive of approved quality and screws / nails on
the edges of the Pre-laminated particle board as per direction of Engineer-in-Charge.
Description
Unit
Quantity
Rate
Amount
metre
10.00
30.00
300.00
day
day
0.25
0.25
361.00
297.00
90.25
74.25
464.50
4.65
469.15
70.37
539.52
53.95
53.95
Providing and fixing bright finished 100 mm mortice lock with 6 levers without
pair of handles of approved quality for aluminium door, with necessary screws
etc complete as per direction of Engineerin- charge.
Description
Unit
Quantity
Rate
Amount
each
1.00
330.00
330.00
day
L.S.
0.13
2.60
393.00
1.70
51.09
4.42
385.51
3.86
389.37
58.41
447.78
447.80
8714
Description
Unit
488
each
Quantity
1.00
Rate
20.00
Amount
20.00
Code
9999
Description
Unit
L.S.
Quantity
2.60
Rate
1.70
Amount
4.42
24.42
0.24
24.66
3.70
28.36
28.35
8715
9999
9.115
Code
8703
9999
9999
9.116
Code
8704
Description
Unit
each
L.S.
Quantity
1.00
2.60
Rate
15.00
1.70
Amount
15.00
4.42
19.42
0.19
19.61
2.94
22.55
22.55
Providing and fixing powder coated telescopic drawer channels 300 mm long with
necessary screws etc. complete as per directions of Engineer-in-charge.
Description
Unit
set
L.S.
L.S.
Quantity
10.00
19.50
100.10
Rate
140.00
1.70
1.70
Amount
1400.00
33.15
170.17
1603.32
16.03
1619.35
242.90
1862.25
186.23
186.20
Unit
489
each
Quantity
1.00
Rate
8.00
Amount
8.00
Code
9999
Description
Unit
L.S.
Quantity
1.04
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
9.117
Amount
1.77
9.77
0.10
9.87
1.48
11.35
11.35
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance 1mm), with wall thickness
2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets
and stainless steel screws, joints mitred and plastic welded. The hinge side vertical
of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm
( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame
complete as per manufacturer's specification and direction of Engineer-in-charge.
8010
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
metre
5.00
150.00
750.00
day
day
L.S.
0.15
0.15
4.68
377.00
297.00
1.70
56.55
44.55
7.96
859.06
8.59
867.65
130.15
997.80
199.56
199.55
8705
0156
0114
Description
Unit
490
Quantity
Rate
Amount
metre
5.00
140.00
700.00
day
day
0.15
0.15
377.00
297.00
56.55
44.55
Code
9999
Description
Unit
Sundries
L.S.
Quantity
4.68
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5 metre
Cost of 1 metre
Say
9.118
Amount
7.96
809.06
8.09
817.15
122.57
939.72
187.94
187.95
9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a
uPVC hollow section of size 59x24 mm and wall thickness 2 mm ( 0.2 mm)
with inbuilt edging on both sides. The styles and rails mitred and joint at the
corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The styles of the shutter
reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ( 0.1
mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section
of size 100x24 mm and 2 mm ( 0.2 mm) wall thickness, fixed to the shutter
styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled
with a uPVC multichambered single panel of size not less than 620 mm, having
over all thickness of 20 mm and 1 mm ( 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting horizontally 6 mm
galvanised M.S. rod and fastened with nuts and washers, complete as per
manufacturer's specification and direction of Engineer-in-charge. (For W.C.
and bathroom door shutter).
Code
8001
0156
0114
9999
Description
Unit
491
Quantity
Rate
Amount
sqm
2.38
2150.00
5117.00
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5421.21
54.21
5475.42
821.31
6296.73
2645.68
2645.70
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles
and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (
0.2 mm), with inbuilt decorative moulding edging on one side. The styles and
rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets
of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The
styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20
mm and 1 mm ( 0.1 mm) wall thickness. The lock rail made up of 'H' section, a
uPVC hollow section of size 100x30 mm and 2 mm ( 0.2 mm) wall thickness
fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The
shutter frame filled with a uPVC multi-chambered single panel of size not less
than 620 mm, having over all thickness of 20 mm and 1 mm ( 0.1 mm) wall
thickness . The panels filled vertically and tie bar at two places by inserting
horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,
complete as per manufacturer's specification and direction of Engineer -in-charge.
Code
8002
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2250.00
5355.00
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5659.21
56.59
5715.80
857.37
6573.17
2761.84
2761.85
9.118.3 25 mm thick PVC flush door shutters made out of a one piece Multi chamber
extruded PVC section of the size of 762mm X 25 mm or less as per requirement
with an average wall thickness of 1 mm ( 0.3 mm). PVC foam end cap of size
23x10 mm are provided on both vertical edges to ensure the overall thickness of
25 mm. An M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm ( 0.1 mm) is
inserted along the hinge side of the door. Core of the door shutter should be filled
with High Density Polyurethane foam. The Top & Bottom edges of the shutter are
covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced
with special polymeric reinforcements as per manufacturers specification and
direction of Engineer-in-charge to take up necessary hardware and fixtures.
Stickers indicating the locations of hardware will be pasted at appropriate places.
Code
8706
Description
Unit
492
sqm
Quantity
2.38
Rate
2150.00
Amount
5117.00
Code
0156
0114
9999
Description
Unit
LABOUR:
Carpenter (average)
Beldar
Sundries
day
day
L.S.
Quantity
0.40
0.40
20.36
Rate
377.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.119
Code
8011
0156
0114
9999
9.120
Amount
150.80
118.80
34.61
5421.21
54.21
5475.42
821.31
6296.73
2645.68
2645.70
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall
thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at
corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square
tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square
tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the
frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,
complete as per manufacturers specification and direction of Engineer-in-Charge.
Description
Unit
Quantity
Rate
Amount
metre
5.00
350.00
1750.00
day
day
L.S.
0.15
0.15
7.80
377.00
297.00
1.70
56.55
44.55
13.26
1864.36
18.64
1883.00
282.45
2165.45
433.09
433.10
Providing and fixing factory made panel PVC door shutter consisting of frame
made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles
and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers
of approved make and manufacture . M.S. frame covered with 5 mm thick heat
moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50
mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming
styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and
20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail
and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be
tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided
both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be
provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side
PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7
493
mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined
together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20
mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent
adhesive etc. complete as per direction of Engineer-in-charge, manufacturers
specification & drawing.
9.120.1 30 mm thick plain PVC door shutters.
Code
8003
8100
0637
0640
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2150.00
5117.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5481.61
54.82
5536.43
830.46
6366.89
2675.16
2675.15
8004
8100
0637
0640
0156
0114
9999
Description
Unit
494
Quantity
Rate
Amount
sqm
2.38
2550.00
6069.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
6433.61
64.34
6497.95
974.69
7472.64
3139.76
3139.75
9.121
Code
8707
0156
0114
9999
9.122
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter
of 30 mm thickness.The laminate shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm
thick and shall be filled with suitable wooden block in all the three legs. The frame
shall be covered with fiber glass from all sides. M.S. stay shall be provided at the
bottom to steady the frame.
Description
Unit
Quantity
Rate
Amount
metre
5.00
380.00
1900.00
day
day
L.S.
0.15
0.15
7.80
377.00
297.00
1.70
56.55
44.55
13.26
2014.36
20.14
2034.50
305.18
2339.68
467.94
467.95
9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required
colour and approved brand and manufacture, made with fire - retardant grade
unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming
hollow rails and styles, with wooden frame and suitable blocks of seasoned wood
inside at required places for fixing of fittings, cast monolithically with 5 mm thick
FRP laminate for panels conforming to IS: 14856, including fixing to frames.
Code
8708
8100
0637
0640
0156
0114
Description
Unit
495
Quantity
Rate
Amount
sqm
2.38
1850.00
4403.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
0.40
0.40
377.00
297.00
150.80
118.80
Code
9999
Description
Unit
Sundries
L.S.
Quantity
20.36
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
Amount
34.61
4767.61
47.68
4815.29
722.29
5537.58
2326.71
2326.70
9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different
plain and wood finish made with fire retardant grade unsaturated polyester resin,
moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks
inside at required places for fixing of fittings and polyurethane foam (PUF) /
Polystyrene foam to be used as filler material throughout the hollow panel, casted
monolithically with testing parameters of F.R.P. laminate conforming to table - 3
of IS: 14856, complete as per direction of Engineer-in-charge.
Code
8730
8100
0637
0640
0156
0114
9999
9.123
Code
8710
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2150.00
5117.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5481.61
54.82
5536.43
830.46
6366.89
2675.16
2675.15
Providing and fixing factory made door frame (single rebate) made out of single
piece extruded solid PVC foam profile with homogenous fine cellular structure having
smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be
mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC
solvent cement , including fixing the frame to wall with suitable dia & length anchor
fastener as per manufacturers specification and direction of Engineer-in-charge.
Description
Unit
496
metre
Quantity
5.00
Rate
290.00
Amount
1450.00
Code
0156
0114
9999
Description
Unit
LABOUR:
Carpenter (average)
Beldar
Sundries
day
day
L.S.
Quantity
0.15
0.15
7.80
Rate
377.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5 metre
Cost of 1 metre
Say
9.124
Amount
56.55
44.55
13.26
1564.36
15.64
1580.00
237.00
1817.00
363.40
363.40
Providing and fixing factory made 30 mm thick door shutter made of solid PVC
foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness
5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm
integrally extruded on the hinge side of the profile for better screw holding power.
The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1
mm, painted with primer, all four corners of reinforcement to be welded or sealed.
Solid PVC extruded bidding (push fit type) will be set inside the styles and the
rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The
styles and rails will be mitred cut and joint with the help of PVC solvent cement &
self driven self tapping screws. Single piece extruded solid PVC lock rail of size
100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the
middle of the lock rail & fixed with styles with the help of PVC solvent cement &
self driven self tapping screws of size 100 mm x 8 mm complete as per
manufacturer's specifications and direction of Engineer-in-charge.
8712
8100
0637
0640
0156
0114
9999
Description
Unit
497
Quantity
Rate
Amount
sqm
2.38
2108.00
5017.04
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5381.65
53.82
5435.47
815.32
6250.79
2626.38
2626.40
8709
8100
0637
0640
0156
0114
9999
9.125
Code
8006
9999
0111
0114
0130
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2650.00
6307.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
6671.61
66.72
6738.33
1010.75
7749.08
3255.92
3255.90
Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters
(bathroom and W.C. doors) using synthetic rubber based adhesive.
Description
Unit
498
Quantity
Rate
Amount
sqm
0.33
185.00
61.05
L.S.
21.84
1.70
37.13
day
day
day
0.11
0.14
0.02
393.00
297.00
393.00
43.23
41.58
7.86
190.85
1.91
192.76
28.91
221.67
738.90
738.90
9.126
8724
9999
0111
9999
Description
Unit
Quantity
Rate
Amount
sqm
0.80
850.00
680.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
914.61
9.15
923.76
138.56
1062.32
1585.55
1585.55
8725
9999
0111
9999
Description
Unit
499
Quantity
Rate
Amount
sqm
0.80
880.00
704.00
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
938.61
9.39
948.00
142.20
1090.20
1627.16
1627.15
9.127
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain
in gloss / matt / suede finish with high density protective surface layer and reverse
side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of
adhesive of approved quality.
8726
9999
0111
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
5.50
195.00
490.00
1.70
2695.00
331.50
day
day
L.S.
0.50
0.50
52.00
393.00
297.00
1.70
196.50
148.50
88.40
3459.90
34.60
3494.50
524.17
4018.67
803.73
803.75
8727
9999
0111
0114
9999
Description
Unit
500
Quantity
Rate
Amount
sqm
L.S.
5.50
195.00
380.00
1.70
2090.00
331.50
day
day
L.S.
0.50
0.50
52.00
393.00
297.00
1.70
196.50
148.50
88.40
2854.90
28.55
2883.45
432.52
3315.97
663.19
663.20
9.128
Code
8713
9999
9999
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4
mm thick of required colour, size and design made by Resin Transfer Moulding
(RTM) Machine Technology, resulting in void free compact laminate in single piece,
having smooth gradual slope curvature for easy drainage of water and duly
reinforced by 2 nos vertically and 1nos horizontally 50x2 mm thick M.S. flat with
12 mm in built hole for grouting on the existing wall along with the 50 mm flanges
duly inserted and sealed in the wall complete in one single piece casted
monolithically, including all necessary fittings. The FRP Chajja should be
manufactured using unsaturated Polyester resin as per IS : 6746, duly reinforced
with fibre glass chopped strand mat (CSM) as per IS : 11551 complete with protective
Gel coat U/V coating on Top for complete resistance from the extreme of
temperature, weather & sunlight.
Description
Unit
Quantity
Rate
sqm
0.54
3600.00
1944.00
L.S.
L.S.
26.00
143.00
1.70
1.70
44.20
243.10
2231.30
22.31
2253.61
338.04
2591.65
4799.35
4799.35
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.54 sqm
Cost of 1 sqm
Say
9.129
Code
7272
9999
8678
0685
0111
0114
0130
Amount
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat
pressed three layer particle board or graded wood particle board IS : 12823 marked,
exterior grade (Grade I Type II), having one side decorative lamination and other
side balancing lamination, including IInd class teak wood lipping of 25 mm wide
x12 mm thick with necessary screws and bright finished stainless steel piano
hinges, complete as per direction of the Engineer-in-Charge.
Description
Unit
501
Quantity
Rate
Amount
sqm
2.20
940.00
2068.00
L.S.
metre
29.64
4.40
1.70
40.00
50.39
176.00
100 Nos
125.00
45.00
56.25
0.50
0.50
0.07
393.00
297.00
393.00
196.50
148.50
27.51
day
day
day
Code
7271
9.130
Description
Unit
metre
Quantity
7.00
Rate
40.00
Amount
280.00
3003.15
30.03
3033.18
454.98
3488.16
1585.53
1585.55
Providing and fixing cup board shutters with 25 mm thick veneered particle board
IS : 3097 marked, exterior grade (Grade I), of approved make including IInd class
teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright
finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial veneering on other side.
Code
7269
0346
9999
8678
0685
0111
0114
0130
7271
Description
Unit
Quantity
Rate
Amount
sqm
sqm
2.20
2.20
480.00
260.00
1056.00
572.00
L.S.
metre
29.64
4.40
1.70
40.00
50.39
176.00
100 Nos
125.00
45.00
56.25
0.50
0.50
0.07
7.00
393.00
297.00
393.00
40.00
196.50
148.50
27.51
280.00
day
day
day
metre
2563.15
25.63
2588.78
388.32
2977.10
1353.23
1353.25
7269
0347
9999
Description
Unit
502
Quantity
Rate
Amount
sqm
sqm
2.20
2.20
480.00
170.00
1056.00
374.00
L.S.
29.64
1.70
50.39
Code
8678
0685
0111
0114
0130
7271
9.131
Description
Unit
metre
100 Nos
day
day
day
metre
Quantity
Rate
Amount
4.40
40.00
176.00
125.00
45.00
56.25
0.50
0.50
0.07
7.00
393.00
297.00
393.00
40.00
196.50
148.50
27.51
280.00
2365.15
23.65
2388.80
358.32
2747.12
1248.69
1248.70
Providing and fixing factory made shutters of pre-laminated particle board flat
pressed three layer or graded wood particle board with one side decorative finish
and other side balancing lamination conforming to IS : 12823 Grade I Type II, of
approved design, and edges sealed with water resistant paint and lipped with
aluminium 'U' type edge beading all-round the shutter, including fixing with angle
cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges
100x63x4 mm etc. complete as per architectural drawing and direction of Engineerin-Charge (Cost of 'U' beading and hinges will be paid for separately).
9.131.1 25 mm thick.
Code
7445
7443
7444
0834
9999
9999
0112
0114
Description
Unit
503
Quantity
Rate
Amount
sqm
2.21
830.00
1834.30
each
each
litre
4.00
8.00
0.15
14.00
11.00
140.00
56.00
88.00
21.00
L.S.
19.50
1.70
33.15
L.S.
39.00
1.70
66.30
day
day
0.27
0.30
361.00
297.00
97.47
89.10
2285.32
22.85
2308.17
346.23
2654.40
1264.00
1264.00
9.132
Code
7449
9999
9999
Providing and fixing aluminum U beading of required size to Pre laminated / flush
door shutter, including fixing etc. complete as per direction of Engineer-in-Charge.
Description
Unit
kilogram
L.S.
L.S.
Quantity
1.10
65.00
13.00
Rate
220.00
1.70
1.70
Amount
242.00
110.50
22.10
374.60
3.75
378.35
56.75
435.10
435.10
9.133
Providing and fixing, in position concealed G.I. section for wall paneling using
board of required thickness fixed on the 'W' profile (0.55 mm thick ) having a
knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm,
placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and
another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.
Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @
610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to
the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all
complete as per the drawing & directions of engineer-in-charge, the joints of the
boards are finished with specially formulated jointing compound and 48 mm
wide jointing tape to provide seamless finish.
9.133.1
Tapered edge calcium silicate board made with calcareous & siliceous materials
reinforced with cellulose fiber manufactured through autoclaving process to give
stable crystalline structure with compressive strength 225 kg/sqcm, Bending
strength 100 kg/sqcm.
9.133.1.1 10 mm thick.
Code
8700
8720
8721
8722
Description
Unit
504
Quantity
Rate
Amount
sqm
metre
12.28
19.66
390.00
40.00
4789.20
786.40
metre
9.60
25.00
240.00
each
42.00
2.00
84.00
Code
8723
9999
7018
9999
9999
0111
0114
9.133.2
Description
Unit
100 Nos
L.S.
roll
L.S.
L.S.
day
day
Quantity
Rate
Amount
176.00
20.80
0.19
52.00
26.00
75.00
1.70
145.00
1.70
1.70
132.00
35.36
27.55
88.40
44.20
3.80
4.60
393.00
297.00
1493.40
1366.20
9086.71
90.87
9177.58
1376.64
10554.22
945.72
945.70
9.133.2.1 8 mm thick.
Code
0237
8720
8721
8722
8723
9999
7018
9999
9999
0111
0114
Description
Unit
505
Quantity
Rate
Amount
sqm
12.28
250.00
3070.00
metre
19.66
40.00
786.40
metre
9.60
25.00
240.00
42.00
176.00
20.80
0.19
52.00
26.00
2.00
75.00
1.70
145.00
1.70
1.70
84.00
132.00
35.36
27.55
88.40
44.20
3.80
4.60
393.00
297.00
1493.40
1366.20
7367.51
73.68
7441.19
1116.18
8557.37
766.79
766.80
each
100 Nos
L.S.
roll
L.S.
L.S.
day
day
9.133.3
8717
8720
8721
8722
8723
9999
7018
9999
9999
0111
0114
Description
Unit
Quantity
Rate
Amount
sqm
12.28
170.00
2087.60
metre
19.66
40.00
786.40
metre
9.60
25.00
240.00
42.00
176.00
20.80
0.19
52.00
26.00
2.00
75.00
1.70
145.00
1.70
1.70
84.00
132.00
35.36
27.55
88.40
44.20
3.80
4.60
393.00
297.00
1493.40
1366.20
6385.11
63.85
6448.96
967.34
7416.30
664.54
664.55
each
100 Nos
L.S.
roll
L.S.
L.S.
day
day
9.134
Providing and fixing wire gauge shutters using stainless steel grade 304 wire
gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both
directions for doors, windows and clerestory windows with necessary screws.
9.134.1
35 mm thick shutters.
9.134.1.1
with ISI marked M.S. pressed butt hinges bright finished of required size.
Description
Unit
506
Quantity
Rate
Amount
Code
1190
8737
0595
0597
0637
0640
2204
0111
0112
0114
0130
9999
Description
Unit
Beadings (2x312+2x
150)x( 1.2)x( 1.2)cm = 0.001 cum.
Total = 0.0464 cum.+
Add for wastage @ 10% = 0.005 cum.
Total = 0.0514 cum.
Say 51.4 cudm
Second class teak wood in planks
Stainless steel wire guage (Grade-304)
aperture 1.4 mm and 0.50 mm dia wire
Bright finished or black enameled mild steel
butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel
butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel
screws 40 mm
Bright finished or black enameled mild steel
screws 20 mm
Carriage of timber
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
10 cudm
sqm
51.40
1.41
725.00
830.00
3726.50
1170.30
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
cum
0.0514
121.88
6.26
day
day
day
day
L.S.
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
6236.83
62.37
6299.20
944.88
7244.08
3353.74
3353.75
2505
2204
2504
9999
Description
Unit
507
Quantity
51.40
0.0514
0.0514
8.97
Rate
370.00
121.88
730.00
1.70
Amount
1901.80
6.26
37.52
15.25
Code
8737
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
Quantity
Rate
Amount
sqm
1.41
830.00
1170.30
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
4464.90
44.65
4509.55
676.43
5185.98
2400.92
2400.90
1200
2204
2504
8737
Description
Unit
508
10 cudm
cum
cum
sqm
Quantity
Rate
Amount
51.40
0.0514
0.0514
650.00
121.88
730.00
3341.00
6.26
37.52
1.41
830.00
1170.30
Code
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
Quantity
Rate
mild steel
10 Nos
6.00
85.00
51.00
mild steel
10 Nos
2.00
50.00
10.00
mild steel
100 nos
48.00
50.00
24.00
mild steel
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
5888.85
58.89
5947.74
892.16
6839.90
3166.62
3166.60
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
9.134.1.2
Amount
1190
8737
8220
8218
8211
8214
2204
Description
Unit
509
Quantity
Rate
Amount
10 cudm
51.40
725.00
3726.50
sqm
1.41
830.00
1170.30
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
cum
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
Code
0111
0112
0114
0130
9999
Description
Unit
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Mistry
Sundries
day
day
day
day
L.S.
Quantity
1.30
0.90
1.05
0.105
33.80
Rate
393.00
361.00
297.00
393.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Amount
510.90
324.90
311.85
41.26
57.46
6423.43
64.23
6487.66
973.15
7460.81
3454.08
3454.10
2505
2504
9999
8737
8220
8218
8211
8214
2204
0111
0112
0114
0130
Description
Unit
510
10 cudm
cum
L.S.
Quantity
Rate
Amount
51.40
0.0514
8.97
370.00
730.00
1.70
1901.80
37.52
15.25
sqm
1.41
830.00
1170.30
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
cum
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
day
day
day
day
1.30
0.90
1.05
0.105
393.00
361.00
297.00
393.00
510.90
324.90
311.85
41.26
Code
9999
Description
Unit
Sundries
Quantity
L.S.
33.80
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Amount
57.46
4651.50
46.52
4698.02
704.70
5402.72
2501.26
2501.25
1200
2504
8737
8220
8218
8211
8214
2204
0111
0112
0114
0130
9999
Description
Unit
511
Quantity
Rate
Amount
51.40
0.0514
650.00
730.00
3341.00
37.52
1.41
830.00
1170.30
6.00
240.00
144.00
2.00
130.00
26.00
48.00
8.00
0.0514
200.00
100.00
121.88
96.00
8.00
6.26
1.30
0.90
1.05
0.105
33.80
393.00
361.00
297.00
393.00
1.70
510.90
324.90
311.85
41.26
57.46
6075.45
60.75
6136.20
920.43
7056.63
3266.96
3266.95
9.134.2
30 mm thick shutters.
9.134.2.1
with ISI marked M.S. pressed butt hinges bright finished of required size.
1190
2204
8737
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
44.00
0.044
725.00
121.88
3190.00
5.36
sqm
1.41
830.00
1170.30
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
5607.22
56.07
5663.29
849.49
6512.78
3015.18
3015.20
Description
Unit
512
Quantity
Rate
Amount
Code
2505
2204
2504
9999
8737
0595
0597
0637
0640
0111
0112
0114
0130
9999
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
44.00
0.044
0.044
8.97
370.00
121.88
730.00
1.70
1628.00
5.36
32.12
15.25
sqm
1.41
830.00
1170.30
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4092.59
40.93
4133.52
620.03
4753.55
2200.72
2200.70
Description
Unit
513
Quantity
Rate
Amount
Code
1200
2504
2204
8737
0595
0597
0637
0640
0111
0112
0114
0130
9999
9.134.2.2
Description
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
44.00
0.044
0.044
650.00
730.00
121.88
2860.00
32.12
5.36
sqm
1.41
830.00
1170.30
10 Nos
6.00
85.00
51.00
10 Nos
2.00
50.00
10.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
5309.34
53.09
5362.43
804.36
6166.79
2855.00
2855.00
1190
Description
Unit
514
10 cudm
Quantity
44.00
Rate
725.00
Amount
3190.00
Code
2204
8737
8220
8218
8211
8214
0111
0112
0114
0130
9999
Description
Unit
Carriage of timber
Wire guage 2x160x40cm=1.28 sqm.+
Add wastage @ 10 % = 0.13 sqm
Total = 1.41 sqm
Stainless steel wire guage (Grade-304)
aperture 1.4 mm and 0.50 mm dia wire
Stainless steel butt hinges (heavyweight)
100x60x2.5 mm IS : 12817 marked
Stainless steel butt hinges 50x37x1.5 mm
IS : 12817 marked
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
cum
0.044
121.88
5.36
sqm
1.41
830.00
1170.30
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
5793.82
57.94
5851.76
877.76
6729.52
3115.52
3115.50
2505
2504
9999
2204
8737
Description
Unit
515
Quantity
Rate
Amount
10 cudm
cum
L.S.
cum
44.00
0.044
8.97
0.044
370.00
730.00
1.70
121.88
1628.00
32.12
15.25
5.36
sqm
1.41
830.00
1170.30
Code
8220
8218
8211
8214
0111
0112
0114
0130
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
day
day
L.S.
1.20
0.80
1.00
0.10
33.80
393.00
361.00
297.00
393.00
1.70
471.60
288.80
297.00
39.30
57.46
4279.19
42.79
4321.98
648.30
4970.28
2301.06
2301.05
1200
2504
2204
8737
8220
8218
8211
8214
0111
0112
Description
Unit
516
Quantity
Rate
Amount
10 cudm
cum
cum
44.00
0.044
0.044
650.00
730.00
121.88
2860.00
32.12
5.36
sqm
1.41
830.00
1170.30
10 Nos
6.00
240.00
144.00
10 Nos
2.00
130.00
26.00
100 Nos
100 Nos
48.00
8.00
200.00
100.00
96.00
8.00
day
day
1.20
0.80
393.00
361.00
471.60
288.80
Code
0114
0130
9999
Description
Unit
Beldar
Mistry
Sundries
day
day
L.S.
Quantity
1.00
0.10
33.80
Rate
297.00
393.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.16 sqm
Cost of 1 sqm
Say
Amount
297.00
39.30
57.46
5495.94
54.96
5550.90
832.63
6383.53
2955.34
2955.35
9.135
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows
and clerestory windows using wire gauge with average width of aperture 1.4
mm in both directions with wire of dia 0.50 mm all complete.
9.135.1
Code
8737
9999
1190
2204
0112
0114
9999
9.135.2
Code
Description
Unit
Quantity
Rate
Amount
sqm
1.69
830.00
1402.70
L.S.
1.82
1.70
3.09
10 cudm
cum
6.00
0.006
725.00
121.88
435.00
0.73
day
day
L.S.
0.33
0.25
19.76
361.00
297.00
1.70
119.13
74.25
33.59
2068.49
20.68
2089.17
313.38
2402.55
1560.10
1560.10
Unit
517
Quantity
Rate
Amount
Code
8737
9999
7349
0112
0114
9999
9.136
Code
8738
9999
9999
9.137
Description
Unit
Quantity
Rate
Amount
sqm
1.69
830.00
1402.70
L.S.
metre
1.82
5.00
1.70
15.00
3.09
75.00
day
day
L.S.
0.33
0.25
19.76
361.00
297.00
1.70
119.13
74.25
33.59
1707.76
17.08
1724.84
258.73
1983.57
1288.03
1288.05
Providing and fixing fire resistant door frame of section 143 x 57 mm having
built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120
gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting
60 minutes fire rated door shutters. The frame is fitted with intumuscent fire
seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash
fastener of approved size and make, including applying a coat of approved
brand fire resistant primer etc. complete as per direction of Engineer-in-charge
(Dash fastener to be paid for separately).
Description
Unit
metre
L.S.
L.S.
Quantity
Rate
Amount
9.10
1000.00
9100.00
130.00
4.23
1.70
1.70
221.00
7.19
9328.19
93.28
9421.47
1413.22
10834.69
1190.63
1190.65
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes
fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory
approved by Engineer-in-charge, with suitable mounting on door frame,
consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm
wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/ m2)
518
duly filled FR insulation material and fixing with necessary stainless steel ball
bearing hinges of approved make, including applying a coat of approved fire
resistant primer etc. all complete as per direction of Engineer-in-charge
(panneling to be paid for separately).
Code
8739
9999
9999
Description
Unit
Quantity
Rate
Amount
sqm
3.50
5250.00
18375.00
L.S.
L.S.
180.00
10.00
1.70
1.70
306.00
17.00
18698.00
186.98
18884.98
2832.75
21717.73
6205.07
6205.05
9.138
Providing and fixing glazing in fire resistant door shutters, fixed panels,
ventilators and partitions etc., with G.I. beading of appropriate size, made out
of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant,
including applying a coat of approved fire resistant primer on G.I. beading etc.,
complete all as per direction of Engineer-in-charge.
9.138.1
With clear fire resistant glass panes 6 mm thick of approved brand, having
minimum 60 minutes fire resistance.
Code
8741
8742
8740
8743
Description
Unit
519
Quantity
Rate
Amount
sqm
6.36
21000.00
133560.00
metre
25.52
260.00
6635.20
kg
metre
3.00
76.56
700.00
65.00
2100.00
4976.40
Code
9999
9999
Description
Unit
Labour
Sundries and carriage
L.S.
L.S.
Quantity
180.00
10.00
Rate
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6.36 sqm
Cost of 1 sqm
Say
9.139
Code
8744
0111
9999
Amount
306.00
17.00
147594.60
1475.95
149070.55
22360.58
171431.13
26954.58
26954.60
Providing and fixing panic bar / latch (Double point) fitted with a single body,
Trim Latch & Lock on back side of the Panic Latch of reputed brand and
manufacture to be approved by the Engineer- incharge, all complete.
Description
Unit
Quantity
Rate
Amount
each
1.00
5000.00
5000.00
day
L.S.
0.17
3.64
393.00
1.70
66.81
6.19
5073.00
50.73
5123.73
768.56
5892.29
5892.30
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 Nos
Say
9.140
Providing and fixing plain lining with necessary screws/nuts & bolts/nails,
including a coat of approved primer on one face, and fixed on wooden /steel
frame work, complete as per direction of Engineer-incharge (Frame work shall
be paid for separately).
9.140.1
Code
2413
13.50.1
9999
0156
0114
Description
Unit
520
Quantity
Rate
Amount
sqm
11.00
580.00
6380.00
sqm
10.00
30.75
307.50 A
L.S.
40.10
1.70
68.17
day
day
1.28
1.43
377.00
297.00
482.56
424.71
Code
9999
Description
Unit
L.S.
Quantity
33.56
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(7,719.99 - 307.50 =) 7,412.49
TOTAL
Add CPOH @ 15% except on A i.e on
(7,794.11 - 307.50 =) 7,486.61
Cost of 10 sqm
Cost of 1 sqm
Say
9.141
Code
8014
0156
0114
9999
9.142
Amount
57.05
7719.99
74.12
7794.11
1122.99
8917.10
891.71
891.70
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of
5 mm ( 0.2 mm), made out of single piece extruded PVC profile, with mitred
cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long
arms of cross section size 35 x 15 mm & self driven self taping screws, the
vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of
0.8 mm , including providing EPDM rubber gasket weather seal throughout the
frame, including jointing 5 mm PVC frame strip with PVC solvent cement on
the back of the profile. The door frame to be fixed to the wall using 8 x100 mm
long anchor fasteners complete, all as per manufacturers specification and
direction of Engineer -in- charge.
Description
Unit
Quantity
Rate
Amount
metre
5.00
490.00
2450.00
day
day
L.S.
0.15
0.15
11.65
377.00
297.00
1.70
56.55
44.55
19.80
2570.90
25.71
2596.61
389.49
2986.10
597.22
597.20
35 mm thick factory made Solid panel PVC Door shutter, made out of single
piece extruded soild PVC profiles, 5 mm ( 0.2 mm) thick, having styles & rails
(except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat
and 20 mm shall be tapered (on both side), having one side thickness of 15 mm
integrally extruded on the hinge side of the profile for better screw holding
power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm,
joints of styles & rails to be mitered cut & joint with the help of PVC solvent
cement, self driven self tapping screws & M.S. rectangular pipes bracket of
size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each
521
corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x
35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both
ends, having 15 mm solid core in middle of rail section integrally extruded,
fixing the styles & rails with the help of solvent and self driven self tapping
screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC
extruded sheet inserted in the door as panel, all complete as per manufacturer's
specification and direction of Engineer-in-charge.
9.142.1
Code
8735
8100
0637
0640
0156
0114
9999
9.142.2
Code
8736
8100
0637
0640
0156
0114
Unit
Quantity
Rate
Amount
sqm
2.38
2100.00
4998.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
L.S.
0.40
0.40
30.35
377.00
297.00
1.70
150.80
118.80
51.60
5379.60
53.80
5433.40
815.01
6248.41
2625.38
2625.40
Unit
522
Quantity
Rate
Amount
sqm
2.38
2600.00
6188.00
10 Nos
4.00
85.00
34.00
100 nos
48.00
50.00
24.00
100 Nos
8.00
30.00
2.40
day
day
0.40
0.40
377.00
297.00
150.80
118.80
Code
9999
Description
Unit
Sundries
L.S.
Quantity
30.35
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2.38 sqm
Cost of 1 sqm
Say
9.143
Code
8745
0156
0114
9999
9.144
Amount
51.60
6569.60
65.70
6635.30
995.30
7630.60
3206.13
3206.15
Providing and Fixing factory made uPVC door frame, made of uPVC exturded
sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ( 0.2 mm) ,
corners of the door frame to be mitred cut and jointed with plastic brackets
and stainless steel screws, reinforcing hinge side vertical of the frames with
PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (0.2 mm),
including providing & fixing 3 nos of 125 mm long stainless steel hinges to
the frame, fixing the frame with jamb with required number & size of anchor
dash fastners, all complete as per manufacturer's specification and direction
of Engineerin- charge.
Description
Unit
Quantity
Rate
Amount
metre
5.00
330.00
1650.00
day
day
L.S.
0.15
0.15
4.68
377.00
297.00
1.70
56.55
44.55
7.96
1759.06
17.59
1776.65
266.50
2043.15
408.63
408.65
Providing and fixing 37 mm thick factory made PVC door shutter, styles and
rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2
mm ( 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and
joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220
mm at each corner and stainless steel screws, reinforcing the hinge side of
style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm
( 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm ( 0.2 mm)
will be fixed to the vertical styles. Providing with PVC snapfit beads and panel
of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening
523
with nuts and washers complete, all as per manufacturer's specification and
direction of Engineer-in-charge.
Code
8746
0156
0114
9999
9.145
Code
8747
0156
0114
9999
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2350.00
5593.00
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
5897.21
58.97
5956.18
893.43
6849.61
2877.99
2878.00
Providing and Fixing factory made PVC door frame made of PVC extruded
sections of size 75 mm x 53 mm, having wall thickness 2.0 mm ( 0.2 mm). Both
verticals sides of the frame reinforced with PVC profile of cross section size 28
mm x 30 mm x 2 mm thickness ( 0.2 mm) and 75 mm x 200 mm long, including
reinforcing both ends of the top frame with PVC profile. PVC Door Frame and
PVC reinforcement profile to be mitred cut jointed and fusion welded together,
including providing and fixing 3 nos of 125 mm long stainless steel hinges to
frame, fixing the frame with jamb with required nos & sizes of anchor dash
fastener, all complete as per manufacturer's specification and direction of
engineer-in-charge.
Description
Unit
524
Quantity
Rate
Amount
metre
5.00
350.00
1750.00
day
day
L.S.
0.15
0.15
4.68
377.00
297.00
1.70
56.55
44.55
7.96
1859.06
18.59
1877.65
281.65
2159.30
431.86
431.85
9.146
Code
8748
0156
0114
9999
9.147
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails
made of PVC hollow extruded printed and laminated section having overall
dimension 115 mm x 37 mm with wall thickness 2 mm ( 0.2 mm) with inbuilt
beading on one side, the styles and rails mitred cut and joint at corners by inserting
2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section
size of 28 mm x 30 mm having wall thickness 2 mm ( 0.2 mm). Styles, rails and
reinforcements to be fusion welded together. Only hinge side vertical style to be
reinforced with PVC profile reinforcement in full length. Printed and laminated
PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm ( 0.2 mm) to be
welded horizontally with the vertical styles after inserting PVC profile reinforcement
as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm
printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with
both side threaded and tightened with check nuts and washers complete, all as
per manufacturer's specification and direction of engineer-in-charge.
Description
Unit
Quantity
Rate
Amount
sqm
2.38
2450.00
5831.00
day
day
L.S.
0.40
0.40
20.36
377.00
297.00
1.70
150.80
118.80
34.61
6135.21
61.35
6196.56
929.48
7126.04
2994.13
2994.15
Providing and Fixing factory made uPVC white colour casement/sliding window/
door, made of extruded profiles. Profiles of frames and sash will be mitered cut and
fusion welded at all corners, including drilling of holes for fixing hardware and drainage
of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 0.2 mm
thick galvanised steel profile to be inserted in required profile, frame will be fixed to
the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineerin-charge (Glazing, hardware hinges and fitting etc. to be paid separately).
Note:- Each member of window to be measured separately with clear length.
9.147.1
9.147.1.1
Code
8760
Description
Unit
525
metre
Quantity
1.05
Rate
165.00
Amount
173.25
Code
8775
7390
0111
0114
9999
9999
9.147.1.2
Code
8761
8775
7390
0111
0114
9999
Description
Unit
Qty = 1.00 +
Add wastage @ 5% = 0.05
= 1.05 metre
Steel Galvanised tubular reinforcement for
uPVC door/ window
Qty = 1.00 +
Add wastage @ 5% = 0.05
= 1.05 metre
Neoprene/EPDM rubber gasket
Qty = 1.00 +
Add wastage @ 5% = 0.05
= 1.05 metre
LABOUR:
for fabrication
Carpenter 1 st class
Beldar
Sundries and carriage of materials
Labour for installation, drilling holes, hire
charges of drill, electricity charges, cost of
fasteners and sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
1.05
50.00
52.50
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.10
0.10
5.00
10.00
393.00
297.00
1.70
1.70
39.30
29.70
8.50
17.00
346.50
3.46
349.96
52.49
402.45
402.45
Unit
526
Quantity
Rate
Amount
metre
1.05
150.00
157.50
metre
1.05
50.00
52.50
metre
1.05
25.00
26.25
day
day
L.S.
0.10
0.10
5.00
393.00
297.00
1.70
39.30
29.70
8.50
Code
9999
9.147.1.3
Code
8762
8775
7390
0111
0114
9999
9999
9.147.1.4
Code
8763
Description
Unit
Quantity
L.S.
10.00
Rate
1.70
Amount
17.00
330.75
3.31
334.06
50.11
384.17
384.15
Unit
Quantity
Rate
Amount
metre
1.05
185.00
194.25
metre
1.05
50.00
52.50
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.10
0.10
5.00
10.00
393.00
297.00
1.70
1.70
39.30
29.70
8.50
17.00
367.50
3.68
371.18
55.68
426.86
426.85
T' Profile (one vertical length in between two shutters) (24 mm x 34.5 mm).
Description
Unit
527
metre
Quantity
1.05
Rate
50.00
Amount
52.50
Code
0111
0114
9999
9999
9.147.1.5
Code
8764
7390
0111
0114
9999
9999
Description
Unit
day
day
L.S.
L.S.
Quantity
0.02
0.02
3.00
5.00
Rate
393.00
297.00
1.70
1.70
Amount
7.86
5.94
5.10
8.50
79.90
0.80
80.70
12.10
92.80
92.80
Unit
528
Quantity
Rate
Amount
metre
1.05
50.00
52.50
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.02
0.02
3.00
5.00
393.00
297.00
1.70
1.70
7.86
5.94
5.10
8.50
106.15
1.06
107.21
16.08
123.29
123.30
9.147.2
9.147.2.1
Code
8765
8775
0111
0114
9999
9999
9.147.2.2
Code
8766
8775
0111
0114
Description
Unit
Quantity
Rate
Amount
metre
1.05
235.00
246.75
metre
1.05
50.00
52.50
day
day
L.S.
L.S.
0.10
0.10
5.00
10.00
393.00
297.00
1.70
1.70
39.30
29.70
8.50
17.00
393.75
3.94
397.69
59.65
457.34
457.35
Unit
529
Quantity
Rate
Amount
metre
1.05
265.00
278.25
metre
1.05
50.00
52.50
day
day
0.10
0.10
393.00
297.00
39.30
29.70
Code
9999
9999
9.147.2.3
Code
8767
7390
0111
0114
9999
9999
Description
Unit
L.S.
L.S.
1.70
1.70
Amount
8.50
17.00
Unit
Amount
85.00
89.25
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.02
0.02
3.00
5.00
393.00
297.00
1.70
1.70
7.86
5.94
5.10
8.50
142.90
1.43
144.33
21.65
165.98
166.00
Unit
metre
530
Rate
1.05
9.147.3.1
Quantity
metre
8768
5.00
10.00
Rate
425.25
4.25
429.50
64.42
493.92
493.90
9.147.3
Code
Quantity
Quantity
1.05
Rate
245.00
Amount
257.25
Code
8775
8772
0111
0114
9999
9999
9.147.3.2
Code
8769
8775
8773
0111
0114
9999
Description
Unit
Quantity
Rate
Amount
metre
1.05
50.00
52.50
metre
2.10
25.00
52.50
day
day
L.S.
L.S.
0.10
0.10
5.00
15.00
393.00
297.00
1.70
1.70
39.30
29.70
8.50
25.50
465.25
4.65
469.90
70.48
540.38
540.40
Unit
531
Quantity
Rate
Amount
metre
1.05
230.00
241.50
metre
1.05
50.00
52.50
metre
2.10
18.00
37.80
day
day
L.S.
0.10
0.10
5.00
393.00
297.00
1.70
39.30
29.70
8.50
Code
9999
9.147.3.3
Code
8770
8773
0111
0114
9999
9999
9.147.3.4
Code
8767
Description
Unit
L.S.
Quantity
15.00
Rate
1.70
Amount
25.50
434.80
4.35
439.15
65.87
505.02
505.00
Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x
28 mm).
Description
Unit
Quantity
Rate
Amount
metre
1.05
50.00
52.50
metre
1.05
18.00
18.90
day
day
L.S.
L.S.
0.05
0.05
3.00
5.00
393.00
297.00
1.70
1.70
19.65
14.85
5.10
8.50
119.50
1.20
120.70
18.10
138.80
138.80
Unit
metre
532
Quantity
1.05
Rate
85.00
Amount
89.25
Code
7390
0111
0114
9999
9999
Description
Unit
25.00
26.25
day
day
L.S.
L.S.
0.02
0.02
3.00
5.00
393.00
297.00
1.70
1.70
7.86
5.94
5.10
8.50
142.90
1.43
144.33
21.65
165.98
166.00
9.147.4.1
8768
8775
8772
0111
0114
9999
9999
Unit
533
Amount
1.05
Description
Rate
metre
9.147.4
Code
Quantity
Quantity
Rate
Amount
metre
1.05
245.00
257.25
metre
1.05
50.00
52.50
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.10
0.10
10.00
15.00
393.00
297.00
1.70
1.70
39.30
29.70
17.00
25.50
447.50
4.48
451.98
67.80
519.78
519.80
9.147.4.2
Code
8771
8775
8773
7390
0111
0114
9999
9999
9.147.4.3
Code
8770
8773
Unit
Quantity
Rate
Amount
metre
1.05
290.00
304.50
metre
1.05
50.00
52.50
metre
2.10
18.00
37.80
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.14
0.14
5.00
15.00
393.00
297.00
1.70
1.70
55.02
41.58
8.50
25.50
551.65
5.52
557.17
83.58
640.75
640.75
Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm).
Description
Unit
534
Quantity
Rate
Amount
metre
1.05
50.00
52.50
metre
1.05
18.00
18.90
Code
0111
0114
9999
9999
9.147.4.4
Code
8767
7390
0111
0114
9999
9999
Description
Unit
LABOUR:
for fabrication
Carpenter 1 st class
Beldar
Sundries and carriage of materials
Labour for installation, drilling holes, hire
charges of drill, electricity charges, cost of
fasteners and sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 metre
Say
day
day
L.S.
L.S.
Quantity
0.05
0.05
3.00
5.00
Rate
393.00
297.00
1.70
1.70
Amount
19.65
14.85
5.10
8.50
119.50
1.20
120.70
18.10
138.80
138.80
Unit
535
Quantity
Rate
Amount
metre
1.05
85.00
89.25
metre
1.05
25.00
26.25
day
day
L.S.
L.S.
0.02
0.02
3.00
5.00
393.00
297.00
1.70
1.70
7.86
5.94
5.10
8.50
142.90
1.43
144.33
21.65
165.98
166.00
9.148
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top
hung uPVC windows, of approved quality, with necessary stainless steel screws
etc. as per direction of Engineer-in-charge.
8755
8647
9999
0112
0114
Description
Unit
Quantity
Rate
Amount
each
10.00
230.00
2300.00
100 Nos
L.S.
day
day
40.00
2.73
0.14
0.14
29.00
1.70
361.00
297.00
11.60
4.64
50.54
41.58
2408.36
24.08
2432.44
364.87
2797.31
279.73
279.75
8756
8647
9999
0112
0114
Description
Unit
Quantity
Rate
Amount
each
10.00
290.00
2900.00
100 Nos
L.S.
day
day
40.00
2.73
0.14
0.14
29.00
1.70
361.00
297.00
11.60
4.64
50.54
41.58
3008.36
30.08
3038.44
455.77
3494.21
349.42
349.40
8757
Description
Unit
536
each
Quantity
10.00
Rate
370.00
Amount
3700.00
Code
8647
9999
0112
0114
Description
Unit
100 Nos
L.S.
day
day
Quantity
40.00
2.73
0.14
0.14
Rate
29.00
1.70
361.00
297.00
Amount
11.60
4.64
50.54
41.58
3808.36
38.08
3846.44
576.97
4423.41
442.34
442.35
8758
8647
9999
0112
0114
Description
Unit
Quantity
Rate
Amount
each
10.00
420.00
4200.00
100 Nos
L.S.
day
day
40.00
2.73
0.14
0.14
29.00
1.70
361.00
297.00
11.60
4.64
50.54
41.58
4308.36
43.08
4351.44
652.72
5004.16
500.42
500.40
8759
8647
9999
0112
0114
Description
Unit
537
Quantity
Rate
Amount
each
10.00
530.00
5300.00
100 Nos
L.S.
day
day
40.00
2.73
0.14
0.14
29.00
1.70
361.00
297.00
11.60
4.64
50.54
41.58
5408.36
54.08
5462.44
819.37
6281.81
628.18
628.20
9.149
Code
8750
9999
9999
0156
9.150
Code
8751
9999
9999
0156
9.151
Code
8752
9999
9999
Providing and fixing casement handle made of zinc alloyed (white powder coated)
for uPVC casement window with necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
10.00
160.00
1600.00
L.S.
L.S.
4.42
3.00
1.70
1.70
7.51
5.10
day
0.125
377.00
47.12
1659.73
16.60
1676.33
251.45
1927.78
192.78
192.80
Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding
window with necessary screws etc. complete.
Description
Unit
Quantity
Rate
Amount
each
10.00
110.00
1100.00
L.S.
L.S.
4.42
3.00
1.70
1.70
7.51
5.10
day
0.125
377.00
47.12
1159.73
11.60
1171.33
175.70
1347.03
134.70
134.70
Providing and fixing steel roller for uPVC sliding window with necessary screws
etc. complete.
Description
Unit
each
L.S.
L.S.
538
Quantity
10.00
4.42
3.00
Rate
50.00
1.70
1.70
Amount
500.00
7.51
5.10
Code
0156
Description
LABOUR:
Carpenter (average)
Unit
Quantity
day
0.125
Rate
377.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.152
Code
8753
9999
9999
0156
Code
8754
9999
9999
0156
47.12
559.73
5.60
565.33
84.80
650.13
65.01
65.00
Providing and fixing steel roller for uPVC sliding door with necessary screws etc.
complete.
Description
Unit
Quantity
Rate
each
L.S.
L.S.
10.00
4.42
3.00
85.00
1.70
1.70
850.00
7.51
5.10
day
0.125
377.00
47.12
909.73
9.10
918.83
137.82
1056.65
105.67
105.65
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
9.153
Amount
Amount
Providing and fixing steel (white power coated) crescent lock for uPVC sliding
window/ door with necessary screws etc. complete.
Description
Unit
539
Quantity
Rate
Amount
each
10.00
100.00
1000.00
L.S.
L.S.
4.42
3.00
1.70
1.70
7.51
5.10
day
0.125
377.00
47.12
1059.73
10.60
1070.33
160.55
1230.88
123.09
123.10
9.154
Code
4009
8776
13.50.3
0116
0103
0114
0100
9999
9.155
Code
Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6
mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with
spacing @ 60 cm centre to centre both ways (vertically & horizontally ) or at
required spacing near opening, with necessary welding at junctions and fixing the
frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long
bolt, including making provision for opening for doors, windows, electrical
conduits, switch boards etc., including providing with two coats of approved steel
primer etc. complete, all as per direction of Engineer-in-charge.
Description
Unit
Quantity
Rate
Amount
kilogram
each
61.27
20.00
52.00
20.00
3186.04
400.00
sqm
4.80
24.95
119.76 A
day
day
day
day
L.S.
0.40
0.53
1.23
0.06
33.56
393.00
361.00
297.00
328.00
1.70
157.20
191.33
365.31
19.68
57.05
4496.37
43.77
4540.14
663.06
5203.20
89.17
89.15
Providing and fixing panelling or paneling and glazing in panelled or panelled and
glazed shutters for doors, windows and clerestory windows ( area of opening for
panel inserts excluding portion inside grooves or rebated to be measured). Panelling
for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with
decorative lamination on both side exterior Grade - I MDF Board 12 mm thick
confirming to IS:14587.
Description
Unit
540
Quantity
Rate
Amount
Code
2484
9999
0111
9999
9.156
Description
Unit
MATERIAL:
Both side laminated 12mm thick
MDF Board 4x47.2x38.65 cm = 0.73 sqm
Adding 10% wastage = 0.07 sqm
Total= 0.80 sqm
Pre-laminated with decorative lamination on both
side exterior Grade - I MDF Board 12 mm thick
confirming to IS:14587
Sundries (Carriage of MDF board)
LABOUR:
Carpenter 1 st class
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 0.66 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
sqm
0.80
691.90
553.52
L.S.
1.82
1.70
3.09
day
L.S.
0.57
4.42
393.00
1.70
224.01
7.51
788.13
7.88
796.01
119.40
915.41
1386.98
1387.00
Providing and fixing Pre -laminated medium density fibre board exterior grade
(Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc.
complete ( Frames, backing or studding to be paid separately).
9.156.1 Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board
12 mm thick confirming to IS:14587.
Code
2484
9999
9999
0112
0114
Description
Unit
541
Quantity
Rate
Amount
sqm
7.35
691.90
5085.46
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
day
day
0.90
1.00
361.00
297.00
324.90
297.00
5776.09
57.76
5833.85
875.08
6708.93
958.42
958.40
9.156.2 Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board
18 mm thick confirming to IS:14587.
Code
2485
9999
9999
0112
0114
9.157
Description
Unit
Quantity
Rate
Amount
sqm
7.35
922.50
6780.38
L.S.
L.S.
19.76
26.91
1.70
1.70
33.59
45.75
day
day
0.90
1.00
361.00
297.00
324.90
297.00
7481.62
74.82
7556.44
1133.47
8689.91
1241.42
1241.40
Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998
marked, with one side decorative lamination other side balancing lamination GradeI(exterior grade) in shelves with screws and fittings wherever required, edges to
be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings
to be paid separately).
9.157.1 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587.
Code
2488
Description
Unit
542
sqm
Quantity
0.63
Rate
860.65
Amount
542.21
Code
2489
9999
0112
0114
9999
Description
Unit
Quantity
Rate
Amount
metre
L.S.
3.00
0.91
28.55
1.70
85.65
1.55
day
day
L.S.
0.11
0.06
7.80
361.00
297.00
1.70
39.71
17.82
13.26
700.20
7.00
707.20
106.08
813.28
1355.47
1355.45
9.157.2 Pre-laminated with decorative lamination one side and other side balancing
lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587.
Code
2486
2489
9999
0112
0114
9999
Description
Unit
543
Quantity
Rate
Amount
sqm
0.63
1198.15
754.83
metre
L.S.
3.00
1.82
28.55
1.70
85.65
3.09
day
day
L.S.
0.11
0.06
7.80
361.00
297.00
1.70
39.71
17.82
13.26
914.36
9.14
923.50
138.52
1062.02
1770.03
1770.05
9.158
Providing and fixing in wall lining medium density fibre board IS: 14587:
1998 marked, Pre-laminated one side decorative lamination and other side
balancing lamination, with necessary fixing arrangement and screws etc.
complete.
9.158.1 12 mm thick.
Code
2487
9999
9999
0112
0114
7048
Description
Unit
Quantity
Rate
Amount
sqm
11.00
641.25
7053.75
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
day
day
each
1.28
1.43
55.00
361.00
297.00
10.00
462.08
424.71
550.00
8559.27
85.59
8644.86
1296.73
9941.59
994.16
994.15
9.158.2 18 mm thick.
Code
2488
9999
9999
0112
0114
Description
Unit
544
Quantity
Rate
Amount
sqm
11.00
860.65
9467.15
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
day
day
1.28
1.43
361.00
297.00
462.08
424.71
Code
7048
Description
Unit
each
Quantity
55.00
Rate
10.00
Amount
550.00
10972.67
109.73
11082.40
1662.36
12744.76
1274.48
1274.50
9.158.3 25 mm thick.
Code
2486
9999
9999
0112
0114
7048
9.159
Code
2486
Description
Unit
Quantity
Rate
Amount
sqm
11.00
1198.15
13179.65
L.S.
L.S.
13.52
26.91
1.70
1.70
22.98
45.75
day
day
each
1.28
1.43
55.00
361.00
297.00
10.00
462.08
424.71
550.00
14685.17
146.85
14832.02
2224.80
17056.82
1705.68
1705.70
Providing and fixing 25mm thick pre-laminated medium density fibre board exterior
grade ( Grade-I) IS:14587:1998 marked one side decorative and other side balancing
lamination for cupboard shutters edges to be sealed with PVC edge bending tape
2.00 mm thick of approved brand including ISI marked nickeled plated bright
finishing M.S. piano hinges IS:3818 marked with necessary screwed complete.
Description
Unit
545
sqm
Quantity
2.20
Rate
1198.15
Amount
2635.93
Code
9999
2489
0608
0639
0156
0114
9.160
Description
Unit
Quantity
Rate
Amount
L.S.
26.94
1.70
45.80
metre
6.40
28.55
182.72
metre
4.40
40.00
176.00
125.00
35.00
43.75
0.55
0.55
377.00
297.00
207.35
163.35
3454.90
34.55
3489.45
523.42
4012.87
1824.03
1824.05
100 Nos
day
day
Providing and fixing skirting with Pre-laminated medium density fibre board exterior
grade (Grade-I) IS: 14587:1998 marked, (one side decorative and other side balancing
lamination) with necessary fixing arrangements and screws, including drilling
necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending
tape 2.00 mm thick of approved brand complete.
9.160.1 18 mm thick.
Code
2488
Description
Unit
546
sqm
Quantity
6.60
Rate
860.65
Amount
5680.29
Code
9999
2489
7048
9999
0112
0114
9999
Description
Unit
Quantity
Rate
Amount
L.S.
metre
each
L.S.
8.11
30.00
102.00
130.00
1.70
28.55
10.00
1.70
13.79
856.50
1020.00
221.00
day
day
L.S.
0.77
0.86
53.82
361.00
297.00
1.70
277.97
255.42
91.49
8416.46
84.16
8500.62
1275.09
9775.71
1629.29
1629.30
9.160.2 25 mm thick.
Code
2486
9999
2489
7048
9999
0112
0114
9999
Description
Unit
547
sqm
Quantity
Rate
Amount
6.60
1198.15
7907.79
L.S.
metre
each
L.S.
8.11
30.00
102.00
130.00
1.70
28.55
10.00
1.70
13.79
856.50
1020.00
221.00
day
day
L.S.
0.77
0.86
53.82
361.00
297.00
1.70
277.97
255.42
91.49
10643.96
106.44
10750.40
1612.56
12362.96
2060.49
2060.50
STEEL WORK
549
10.1
Structural steel work in single section, fixed with or without connecting plate,
including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer all complete.
Code
Description
1007
2205
0116
0103
0114
13.50.3
9999
10.2
Code
1007
Unit
Quantity
Rate
Amount
quintal
1.05
4650.00
4882.50
tonne
0.105
94.80
9.95
day
day
day
0.50
0.75
1.00
393.00
361.00
297.00
196.50
270.75
297.00
sqm
3.00
24.95
74.85 A
L.S.
20.67
1.70
35.14
5766.69
56.92
5823.61
862.31
6685.92
66.86
66.85
Structural steel work riveted, bolted or welded in built up sections, trusses and
framed work, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete.
Description
Unit
551
quintal
Quantity
1.60
Rate
4650.00
Amount
7440.00
Code
1009
1020
1221
2205
0116
0103
0139
0114
0100
13.50.3
Description
Unit
552
Quantity
Rate
Amount
quintal
0.53
4500.00
2385.00
quintal
1.90
4700.00
8930.00
quintal
0.0684
5000.00
342.00
quintal
tonne
0.0529
0.415
5800.00
94.80
306.82
39.34
day
day
day
day
day
2.70
3.60
5.40
3.60
0.44
393.00
361.00
328.00
297.00
328.00
1061.10
1299.60
1771.20
1069.20
144.32
sqm
5.68
24.95
141.72 A
Code
9999
Description
Unit
Sundries
L.S.
Quantity
80.73
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(25,067.54 - 141.72 =) 24,925.82
TOTAL
Add CPOH @ 15% except on A i.e on
(25,316.80 - 141.72 =) 25,175.08
Cost of 395 kg
Cost of 1 kg
Say
10.3
Code
1007
1007
1008
2205
9999
9999
4013
Amount
137.24
25067.54
249.26
25316.80
3776.26
29093.06
73.65
73.65
Providing and fixing in position collapsible steel shutters with vertical channels
20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom
rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts,
locking arrangement, stoppers, handles, including applying a priming coat of
approved steel primer.
Description
Unit
553
Quantity
Rate
Amount
quintal
0.53
4650.00
2464.50
quintal
0.13
4650.00
604.50
quintal
tonne
0.60
0.126
4200.00
94.80
2520.00
11.94
L.S.
L.S.
each
269.10
67.34
10.00
1.70
1.70
30.00
457.47
114.48
300.00
Code
Description
13.50.3
0116
0102
0103
0123
0124
0114
9999
10.4
Code
1013
1010
Unit
Quantity
Rate
Amount
sqm
10.50
24.95
261.97 A
day
day
day
day
day
day
L.S.
3.00
6.00
6.00
0.50
0.50
8.00
161.46
393.00
393.00
361.00
393.00
361.00
297.00
1.70
1179.00
2358.00
2166.00
196.50
180.50
2376.00
274.48
15465.34
152.03
15617.37
2303.31
17920.68
4977.97
4977.95
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal
braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junction and
corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top and bottom
respectively, including applying a priming coat of approved steel primer.
Description
Unit
554
Quantity
Rate
Amount
quintal
0.497
4900.00
2435.30
quintal
0.153
4700.00
719.10
Code
1007
1007
2205
9999
0969
9999
9999
9999
13.50.3
0116
0102
0103
0114
0123
0124
9999
Description
Unit
555
Quantity
Rate
Amount
quintal
1.39
4650.00
6463.50
quintal
0.11
4650.00
511.50
tonne
0.216
94.80
20.48
L.S.
each
L.S.
L.S.
L.S.
269.10
8.00
167.75
269.10
13.52
1.70
35.00
1.70
1.70
1.70
457.47
280.00
285.18
457.47
22.98
sqm
18.00
24.95
449.10 A
day
day
day
day
day
day
L.S.
2.00
3.00
4.00
4.00
0.06
0.06
161.46
393.00
393.00
361.00
297.00
393.00
361.00
1.70
786.00
1179.00
1444.00
1188.00
23.58
21.66
274.48
17018.80
165.70
17184.50
2510.31
19694.81
3419.24
3419.25
10.5
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer.
1013
1013
1007
2205
1036
1222
1019
9999
9999
13.50.3
0116
0102
0103
0123
0124
0114
Description
Unit
556
Quantity
Rate
Amount
quintal
0.497
4900.00
2435.30
quintal
0.153
4900.00
749.70
quintal
0.936
4650.00
4352.40
tonne
0.1586
94.80
15.04
each
each
4.00
4.00
40.00
130.00
160.00
520.00
each
L.S.
L.S.
2.00
167.70
269.10
35.00
1.70
1.70
70.00
285.09
457.47
sqm
15.41
24.95
384.48 A
day
day
day
day
day
day
2.00
3.00
4.00
0.06
0.06
5.00
393.00
393.00
361.00
393.00
361.00
297.00
786.00
1179.00
1444.00
23.58
21.66
1485.00
Code
9999
Description
Sundries
Unit
Quantity
L.S.
161.46
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(14,643.20 - 384.48 =) 14,258.72
TOTAL
Add CPOH @ 15% except on A i.e on
(14,785.79 - 384.48 =) 14,401.31
Cost of 5.76 sqm
Cost of 1 sqm
Say
Amount
274.48
14643.20
142.59
14785.79
2160.20
16945.99
2942.01
2942.00
10.5.2 Using flats 30x6 mm for diagonal braces and central cross piece.
Code
1013
1010
1007
1008
2205
1036
Description
Unit
557
Quantity
Rate
Amount
quintal
0.497
4900.00
2435.30
quintal
0.2078
4700.00
976.66
quintal
0.554
4650.00
2576.10
quintal
0.188
4200.00
789.60
tonne
each
0.1447
4.00
94.80
40.00
13.72
160.00
Code
Description
1222
1019
9999
9999
13.50.3
0116
0102
0103
0123
0124
0114
9999
10.6
Unit
Quantity
Rate
Amount
each
4.00
130.00
520.00
each
L.S.
L.S.
2.00
167.70
269.10
35.00
1.70
1.70
70.00
285.09
457.47
sqm
14.70
24.95
366.76 A
day
day
day
day
day
day
L.S.
2.00
3.00
4.00
0.06
0.06
5.00
161.46
393.00
393.00
361.00
393.00
361.00
297.00
1.70
786.00
1179.00
1444.00
23.58
21.66
1485.00
274.48
13864.42
134.98
13999.40
2044.90
16044.30
2785.47
2785.45
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the
end by end locks, mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with push and pull operation
complete, including the cost of providing and fixing necessary 27.5 cm long wire
springs manufactured from high tensile steel wire of adequate strength conforming
to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters.
0973
0974
0975
9999
0116
Description
Unit
558
Quantity
Rate
Amount
sqm
7.50
1250.00
9375.00
metre
each
2.50
1.00
600.00
280.00
1500.00
280.00
L.S.
53.82
1.70
91.49
day
2.55
393.00
1002.15
Code
0114
0123
0124
9999
Description
Beldar
Mason (brick layer) 1 st class
Mason (brick layer) 2nd class
Sundries
Unit
Quantity
day
day
day
L.S.
2.55
0.12
0.12
60.58
Rate
297.00
393.00
361.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 7.5 sqm
Cost of 1 sqm
Say
Amount
757.35
47.16
43.32
102.99
13199.46
131.99
13331.45
1999.72
15331.17
2044.16
2044.15
7045
7047
0975
9999
0116
0114
0123
0124
9999
Description
Unit
Quantity
Rate
Amount
sqm
metre
each
L.S.
7.50
2.50
1.00
53.82
1150.00
350.00
280.00
1.70
8625.00
875.00
280.00
91.49
day
day
day
day
L.S.
2.55
2.55
0.12
0.12
60.58
393.00
297.00
393.00
361.00
1.70
1002.15
757.35
47.16
43.32
102.99
11824.46
118.24
11942.70
1791.40
13734.10
1831.21
1831.20
7044
7046
0975
9999
0116
0114
0123
0124
Description
Unit
559
Quantity
Rate
Amount
sqm
metre
each
7.50
2.50
1.00
1080.00
320.00
280.00
8100.00
800.00
280.00
L.S.
53.82
1.70
91.49
day
day
day
day
2.55
2.55
0.12
0.12
393.00
297.00
393.00
361.00
1002.15
757.35
47.16
43.32
Code
9999
Description
Unit
Sundries
Quantity
L.S.
60.58
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 7.5 sqm
Cost of 1 sqm
Say
10.7
Code
0976
9999
102.99
11224.46
112.24
11336.70
1700.50
13037.20
1738.29
1738.30
Unit
each
L.S.
Quantity
1.00
26.91
Rate
330.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
10.8
Amount
Amount
330.00
45.75
375.75
3.76
379.51
56.93
436.44
436.45
Extra for providing mechanical device chain and crank operation for operating rolling
shutters.
10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area.
Code
0977
9999
Description
Unit
Quantity
Rate
Amount
sqm
1.00
550.00
550.00
L.S.
13.52
1.70
22.98
572.98
5.73
578.71
86.81
665.52
665.50
Description
Unit
Quantity
sqm
1.00
0978
560
Rate
580.00
Amount
580.00
Code
Description
9999
Unit
Sundries
L.S.
Quantity
13.52
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
10.9
Amount
22.98
602.98
6.03
609.01
91.35
700.36
700.35
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar
instead of laths as per design approved by Engineer-in-Charge, (area of grill to be
measured).
Code
7068
Description
Unit
sqm
Quantity
1.50
Rate
270.00
Amount
405.00
405.00
4.05
409.05
61.36
470.41
313.61
313.60
10.10
Fixing standard steel glazed doors, windows and ventilators in walls, including
fixing of float glass panes with glazing clips and special metal-sash putty of
approved make, or metal beading with screws, (only steel windows, glass panes
cut to size and glazing clips or metal beading with screws, shall be supplied by
department free of cost.
10.10.1
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10
cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size).
Code
Description
4.2.5
0102
0123
0124
0114
Unit
561
Quantity
Rate
Amount
cum
0.009
5309.00
47.78 A
day
day
day
day
0.17
0.08
0.08
0.50
393.00
393.00
361.00
297.00
66.81
31.44
28.88
148.50
Code
9999
Description
Sundries for carriage of material
Unit
Quantity
L.S.
67.28
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(437.79 - 47.78 =) 390.01
TOTAL
Add CPOH @ 15% except on A i.e on
(441.69 - 47.78 =) 393.91
Cost of 15 kg
Cost of 1 kg
Say
Amount
114.38
437.79
3.90
441.69
59.09
500.78
33.39
33.40
10.10.2
Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Code
Description
0102
0114
9999
Unit
Quantity
day
day
L.S.
0.17
0.17
67.28
Rate
393.00
297.00
1.70
Amount
66.81
50.49
114.38
231.68
2.32
234.00
35.10
269.10
17.94
17.95
10.11
Providing and fixing factory made ISI marked steel glazed doors, windows and
ventilators, side / top / centre hung, with beading and all members such as F7D,
F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred
and flash butt welded and sash bars tenoned and riveted, including providing and
fixing of hinges, pivots, including priming coat of approved steel primer , but
excluding the cost of other fittings, complete all as per approved design, (sectional
weight of only steel members shall be measured for payment).
10.11.1
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10
cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size).
Code
Description
1011
9999
0103
562
Unit
Quantity
Rate
Amount
kg
30.00
48.00
1440.00
L.S.
40.37
1.70
68.63
day
0.17
361.00
61.37
Code
0116
0114
9999
10.10.1
13.50.3
Description
Unit
Fitter (grade 1)
Beldar
Sundries
Fixing with CC 1:3:6 blocks, wooden plugs
and screws or rawl plugs and screws or with
fixing clips and bolts and nuts as required
including metal sash putty for glass fixing
Rate as per Item Number 10.10.1
Apply steel primer (2.44x 1.00 for both sides
=2.44 sqm
Rate as per Item Number 13.50.3 of SH:
Finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(2,862.17 - 1,062.88 =) 1,799.29
TOTAL
Add CPOH @ 15% except on A i.e on
(2,880.16 - 1,062.88 =) 1,817.28
Cost of 30 kg
Cost of 1 kg
Say
Quantity
Rate
Amount
day
day
L.S.
0.26
0.34
15.37
393.00
297.00
1.70
102.18
100.98
26.13
kg
30.00
33.40
1002.00 A
sqm
2.44
24.95
60.88 A
2862.17
17.99
2880.16
272.59
3152.75
105.09
105.10
10.11.2
Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Code
Description
1011
9999
0103
0116
0114
9999
13.50.3
563
Unit
Quantity
Rate
Amount
kg
30.00
48.00
1440.00
L.S.
40.37
1.70
68.63
day
day
day
L.S.
0.17
0.26
0.34
15.37
361.00
393.00
297.00
1.70
61.37
102.18
100.98
26.13
sqm
2.44
24.95
60.88 A
1860.17
17.99
1878.16
272.59
2150.75
71.69
71.70
10.12
Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type),
approved shape and section with screws instead of glazing clips and metal sash
putty, in steel doors, windows, ventilators and composite units.
Code
Description
1143
9999
9999
Unit
metre
L.S.
L.S.
Quantity
1.00
0.46
3.01
Rate
25.00
1.70
1.70
Amount
25.00
0.78
5.12
30.90
0.31
31.21
4.68
35.89
35.90
10.13
Providing and fixing T-iron frames for doors, windows and ventilators of mild
steel Tee-sections, joints mitred and welded, including fixing of necessary butt
hinges and screws and applying a priming coat of approved steel primer.
10.13.1
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10
cm of C.C. 1:3:6 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete
block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size).
Code
Description
1007
1002
1008
4.2.5
0595
9999
9999
9999
Unit
564
Quantity
Rate
Amount
quintal
0.18
4650.00
837.00
quintal
0.006
4500.00
27.00
quintal
0.002
4200.00
8.40
cum
0.009
5309.00
47.78 A
10 Nos
6.00
85.00
51.00
L.S.
L.S.
L.S.
35.88
17.94
5.33
1.70
1.70
1.70
61.00
30.50
9.06
Code
0103
0116
0114
9999
Description
Unit
LABOUR:
Blacksmith 2nd class
Fitter (grade 1)
Beldar
Sundries
day
day
day
L.S.
Quantity
0.10
0.15
0.20
8.97
Rate
361.00
393.00
297.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,241.44 - 47.78 =) 1,193.66
TOTAL
Add CPOH @ 15% except on A i.e on
(1,253.38 - 47.78 =) 1,205.60
Cost of 17.5 kg
Cost of 1 kg
Say
10.13.2
Code
1007
1002
0595
9999
9999
9999
0103
0116
0114
9999
Amount
36.10
58.95
59.40
15.25
1241.44
11.94
1253.38
180.84
1434.22
81.96
81.95
Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Description
Unit
565
Quantity
Rate
Amount
quintal
0.18
4650.00
837.00
quintal
0.006
4500.00
27.00
10 Nos
6.00
85.00
51.00
L.S.
L.S.
L.S.
35.88
17.94
5.33
1.70
1.70
1.70
61.00
30.50
9.06
day
day
day
L.S.
0.10
0.15
0.20
8.97
361.00
393.00
297.00
1.70
36.10
58.95
59.40
15.25
1185.26
11.85
1197.11
179.57
1376.68
78.67
78.65
10.14
Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 1.60 mm thickness, including
hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle
of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly
fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm
thick with mortar guards, lock strike-plate and shock absorbers as specified and
applying a coat of approved steel primer after pre-treatment of the surface as
directed by Engineer-in-charge.
10.14.1
Profile B.
10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb.
Code
4006
4006
0595
9999
1007
9999
0116
0114
9999
13.50.3
Description
Unit
Quantity
Rate
Amount
metre
5.00
220.00
1100.00
metre
5.00
220.00
1100.00
10 Nos
6.00
85.00
51.00
L.S.
35.88
1.70
61.00
quintal
0.03
4650.00
139.50
L.S.
5.33
1.70
9.06
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
sqm
2.69
24.95
67.12 A
1561.28
14.94
1576.22
226.36
1802.58
360.52
360.50
10.14.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Code
4006
Description
Unit
metre
566
Quantity
5.00
Rate
220.00
Amount
1100.00
Code
9999
0595
9999
1007
9999
0116
0114
9999
13.50.3
10.14.2
Description
Unit
L.S.
Quantity
Rate
Amount
-20.00
1.70
-34.00
10 Nos
6.00
85.00
51.00
L.S.
35.88
1.70
61.00
quintal
0.03
4650.00
139.50
L.S.
5.33
1.70
9.06
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
sqm
2.69
24.95
67.12 A
1527.28
14.60
1541.88
221.21
1763.09
352.62
352.60
Profile C.
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb.
Code
4007
0595
9999
1007
9999
0116
0114
9999
Description
Unit
567
Quantity
Rate
Amount
metre
5.00
240.00
1200.00
10 Nos
6.00
85.00
51.00
L.S.
35.88
1.70
61.00
quintal
0.03
4650.00
139.50
L.S.
5.33
1.70
9.06
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
Code
13.50.3
Description
Unit
Quantity
sqm
2.69
Rate
24.95
Amount
67.12 A
1661.28
15.94
1677.22
241.52
1918.74
383.75
383.75
10.14.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Code
4007
9999
0595
9999
1007
9999
0116
0114
9999
13.50.3
Description
Unit
568
metre
Quantity
Rate
Amount
5.00
240.00
1200.00
L.S.
10 Nos
-20.00
6.00
1.70
85.00
-34.00
51.00
L.S.
35.88
1.70
61.00
quintal
0.03
4650.00
139.50
L.S.
5.33
1.70
9.06
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
sqm
2.69
24.95
67.12 A
1627.28
15.60
1642.88
236.36
1879.24
375.85
375.85
10.14.3
Profile E.
10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb .
Code
4008
0595
9999
1007
9999
0116
0114
9999
13.50.3
Description
Unit
Quantity
Rate
Amount
metre
5.00
270.00
1350.00
10 Nos
6.00
85.00
51.00
L.S.
quintal
35.88
0.03
1.70
4650.00
61.00
139.50
L.S.
5.33
1.70
9.06
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
sqm
2.69
24.95
67.12 A
1811.28
17.44
1828.72
264.24
2092.96
418.59
418.60
10.14.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size ( to be
paid for separately).
Code
4008
9999
0595
9999
1007
9999
Description
Unit
569
metre
Quantity
Rate
Amount
5.00
270.00
1350.00
L.S.
10 Nos
-20.00
6.00
1.70
85.00
34.00
51.00
L.S.
35.88
1.70
61.00
quintal
0.03
4650.00
139.50
L.S.
5.33
1.70
9.06
Code
0116
0114
9999
13.50.3
Description
LABOUR :
Fitter (grade 1)
Beldar
Sundries
(A) Steel primer500 x 2 (2x1.2 + 2x6.0 + 1x12.50 cm)=
2.69 sqm
Rate as per Item Number 13.50.3 of SH:
Finishing
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,777.28 - 67.12 =) 1,710.16
TOTAL
Add CPOH @ 15% except on A i.e on
(1,794.38 - 67.12 =) 1,727.26
Cost of 5 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
day
L.S.
0.15
0.20
8.97
393.00
297.00
1.70
58.95
59.40
15.25
sqm
2.69
24.95
67.12 A
1777.28
17.10
1794.38
259.09
2053.47
410.69
410.70
10.15
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and
cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet,
joints mitred, welded and grinded finish, with profiles of required size, including
fixing of necessary butt hinges and screws and applying a priming coat of
approved steel primer.
10.15.1
Code
4011
1002
Description
Unit
570
Quantity
Rate
Amount
kilogram
7.49
70.00
524.30
quintal
0.006
4500.00
27.00
Code
1008
4.2.5
0595
9999
9999
9999
0103
0116
0114
9999
10.15.2
Code
4011
1002
0595
9999
9999
9999
Description
Unit
Quantity
Rate
Amount
Flats up to 10 mm in thickness
Cement concrete block 1:3:6- 6x15x10x
10cm= 0.009 cum
Rate as per Item Number 4.2.5 of
SH: Concrete work
Bright finished or black enameled mild steel
butt hinges 100x58x1.90 mm
for screws and nuts and bolts
for applying steel primer
Carriage of material
LABOUR:
Blacksmith 2nd class
Fitter (grade 1)
Beldar
Sundries
TOTAL
Add Water Charges @ 1% except on A i.e on
(827.01 - 47.78 =) 779.23
TOTAL
Add CPOH @ 15% except on A i.e on
(834.80 - 47.78 =) 787.02
Cost of 7.13 kg
Cost of 1 kg
Say
quintal
0.002
4200.00
8.40
cum
0.009
5309.00
47.78 A
10 Nos
6.00
85.00
51.00
L.S.
L.S.
L.S.
35.88
17.94
5.33
1.70
1.70
1.70
61.00
30.50
9.06
day
day
day
L.S.
0.04
0.06
0.08
3.64
361.00
393.00
297.00
1.70
14.44
23.58
23.76
6.19
827.01
7.79
834.80
118.05
952.85
133.64
133.65
Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately).
Description
Unit
571
Quantity
Rate
Amount
kilogram
7.49
70.00
524.30
quintal
10 Nos
0.006
6.00
4500.00
85.00
27.00
51.00
L.S.
L.S.
L.S.
35.88
17.94
5.33
1.70
1.70
1.70
61.00
30.50
9.06
Code
0103
0116
0114
9999
Description
Unit
LABOUR:
Blacksmith 2nd class
Fitter (grade 1)
Beldar
Sundries
day
day
day
L.S.
Quantity
0.04
0.06
0.08
3.64
Rate
361.00
393.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 7.13 kg
Cost of 1 kg
Say
Amount
14.44
23.58
23.76
6.19
770.83
7.71
778.54
116.78
895.32
125.57
125.55
10.16
Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. )
trusses etc., including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete.
10.16.1
Code
4009
2205
13.50.3
1215
Description
Unit
572
kilogram
tonne
Quantity
Rate
Amount
125.00
0.125
52.00
94.80
6500.00
11.85
sqm
2.80
24.95
69.86 A
cm
357.00
1.80
642.60
Code
0102
0100
0114
9999
Description
Blacksmith 1 st class
Bandhani
Beldar
Sundries
Unit
Quantity
day
day
day
L.S.
1.50
0.75
5.50
80.73
Rate
393.00
328.00
297.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(9,830.55 - 69.86 =) 9,760.69
TOTAL
Add CPOH @ 15% except on A i.e on
(9,928.16 - 69.86 =) 9,858.30
Cost of 119 kg
Cost of 1 kg
Say
10.16.2
Code
4010
2205
13.50.3
1215
0102
0100
0114
Amount
589.50
246.00
1633.50
137.24
9830.55
97.61
9928.16
1478.74
11406.90
95.86
95.85
Unit
573
kilogram
tonne
Quantity
Rate
Amount
125.00
0.125
65.00
94.80
8125.00
11.85
sqm
2.80
24.95
69.86 A
cm
357.00
1.80
642.60
day
day
day
1.50
0.75
5.50
393.00
328.00
297.00
589.50
246.00
1633.50
Code
9999
Description
Sundries
Unit
Quantity
L.S.
80.73
Rate
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(11,455.55 - 69.86 =) 11,385.69
TOTAL
Add CPOH @ 15% except on A i.e on
(11,569.41 - 69.86 =) 11,499.55
Cost of 119 kg
Cost of 1 kg
Say
10.16.3
Code
4011
2205
13.50.3
1215
0102
0100
0114
9999
Amount
137.24
11455.55
113.86
11569.41
1724.93
13294.34
111.72
111.70
Unit
574
Quantity
Rate
Amount
kilogram
125.00
70.00
8750.00
tonne
0.125
94.80
11.85
sqm
2.80
24.95
69.86 A
cm
357.00
1.80
642.60
day
day
day
L.S.
1.50
0.75
5.50
80.73
393.00
328.00
297.00
1.70
589.50
246.00
1633.50
137.24
12080.55
120.11
12200.66
1819.62
14020.28
117.82
117.80
10.17
Code
1003
0103
0114
9999
10.18
Code
4012
1002
0103
0114
9999
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to
shape with hooked ends in R.C.C. slabs or beams during laying, including
painting the exposed portion of loop, all as per standard design complete.
Description
Unit
Quantity
Rate
Amount
quintal
0.017
4300.00
73.10
day
day
L.S.
0.04
0.04
1.82
361.00
297.00
1.70
14.44
11.88
3.09
102.51
1.03
103.54
15.53
119.07
119.05
Providing and fixing circular / hexagonal cast iron or M.S. sheet box for ceiling
fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S.
sheet with its top surface hacked for proper bonding, top lid shall be screwed
into the cast iron / M.S. sheet box by means of 3.3 mm dia round headed screws,
one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape
as per standard drawing.
Description
Unit
575
Quantity
Rate
Amount
each
1.00
60.00
60.00
quintal
0.008
4500.00
36.00
day
day
L.S.
0.03
0.03
1.82
361.00
297.00
1.70
10.83
8.91
3.09
118.83
1.19
120.02
18.00
138.02
138.00
10.19
Code
1035
1010
0103
9999
10.20
Code
1034
2205
0103
0114
9999
10.21
Code
1020
2205
0116
0139
Providing and fixing mild steel round holding down bolts with nuts and washer
plates complete.
Description
Unit
Quantity
Rate
Amount
quintal
0.019
5600.00
106.40
quintal
0.005
4700.00
23.50
day
L.S.
0.03
4.55
361.00
1.70
10.83
7.74
148.47
1.48
149.95
22.49
172.44
71.85
71.85
Unit
Quantity
Rate
Amount
quintal
tonne
0.10
0.01
5600.00
94.80
560.00
0.95
day
day
L.S.
0.38
0.38
4.55
361.00
297.00
1.70
137.18
112.86
7.74
818.73
8.19
826.92
124.04
950.96
95.10
95.10
Unit
576
Quantity
Rate
Amount
quintal
tonne
0.10
0.01
5000.00
94.80
500.00
0.95
day
day
0.83
0.83
393.00
328.00
326.19
272.24
Code
9999
Description
Sundries
Unit
Quantity
L.S.
10.79
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 kg
Cost of 1 kg
Say
10.22
Code
1214
9999
Amount
18.34
1117.72
11.18
1128.90
169.34
1298.24
129.82
129.80
Unit
Quantity
Rate
Amount
cm
1.00
2.00
2.00
L.S.
0.26
1.70
0.44
2.44
0.02
2.46
0.37
2.83
2.85
10.25
Steel work welded in built up sections / framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.
10.25.1
In stringers, treads, landings etc. of stair cases, including use of chequered plate
wherever required, all complete.
Code
1007
Description
Unit
577
quintal
Quantity
3.161
Rate
4650.00
Amount
14698.65
Code
1010
1549
1003
2205
2271
1215
0102
0114
0100
13.50.3
9999
10.25.2
Code
1008
Description
Unit
Quantity
Rate
Amount
quintal
1.103
4700.00
5184.10
metre
26.65
220.00
5863.00
quintal
tonne
0.373
0.4637
4300.00
94.80
1603.90
43.96
tonne
0.0991
94.80
9.39
cm
2320.00
1.80
4176.00
day
day
day
1.85
1.25
0.60
393.00
297.00
328.00
727.05
371.25
196.80
sqm
48.29
24.95
1204.84 A
L.S.
110.89
1.70
188.51
34267.45
330.63
34598.08
5008.99
39607.07
74.30
74.30
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Description
Unit
quintal
578
Quantity
0.145
Rate
4200.00
Amount
609.00
Code
1002
2205
1215
0102
0114
0100
13.50.3
9999
Description
Unit
quintal
tonne
cm
Quantity
Rate
Amount
0.084
0.0229
60.00
4500.00
94.80
1.80
378.00
2.17
108.00
day
day
day
0.70
0.50
0.25
393.00
297.00
328.00
275.10
148.50
82.00
sqm
0.60
24.95
14.97 A
L.S.
4.55
1.70
7.74
1625.48
16.11
1641.59
243.99
1885.58
86.49
86.50
10.26
Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying
priming coat of approved steel primer.
10.26.1
M.S. tube.
Code
Description
4009
2205
13.50.3
1215
0102
Unit
579
kilogram
tonne
Quantity
Rate
Amount
20.46
0.0205
52.00
94.80
1063.92
1.94
sqm
0.82
24.95
20.46 A
cm
72.00
1.80
129.60
day
0.24
393.00
94.32
Code
0114
0100
9999
Description
Beldar
Bandhani
Sundries
Unit
Quantity
day
day
L.S.
0.90
0.12
12.48
Rate
297.00
328.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(1,638.12 - 20.46 =) 1,617.66
TOTAL
Add CPOH @ 15% except on A i.e on
(1,654.30 - 20.46 =) 1,633.84
Cost of 19.49 kg
Cost of 1 kg
Say
10.26.2
Code
4011
2205
13.50.3
1215
0102
0114
0100
9999
Amount
267.30
39.36
21.22
1638.12
16.18
1654.30
245.08
1899.38
97.45
97.45
E.R.W. tubes.
Description
Unit
580
Quantity
Rate
Amount
kilogram
18.59
70.00
1301.30
tonne
0.0186
94.80
1.76
sqm
0.82
24.95
20.46 A
cm
72.00
1.80
129.60
day
day
day
L.S.
0.24
0.90
0.12
12.48
393.00
297.00
328.00
1.70
94.32
267.30
39.36
21.22
1875.32
18.55
1893.87
281.01
2174.88
122.81
122.80
10.26.3
G.I. pipes.
Code
Description
1549
2271
13.50.3
1215
0102
0114
0100
9999
Unit
metre
tonne
Quantity
Rate
Amount
5.67
0.0211
220.00
94.80
1247.40
2.00
sqm
0.82
24.95
20.46 A
cm
72.00
1.80
129.60
day
day
day
L.S.
0.24
0.90
0.12
12.48
393.00
297.00
328.00
1.70
94.32
267.30
39.36
21.22
1821.66
18.01
1839.67
272.88
2112.55
105.15
105.15
10.27
Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash
fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),
counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,
including drilling of hole in frame , concrete/ masonry, etc. as per direction of
Engineer-in-charge.
10.27.1
10 x60 mm.
Code
2506
0124
Description
Unit
581
Quantity
Rate
Amount
10 nos
10.00
250.00
250.00
day
0.40
361.00
144.40
Code
0114
9999
Description
Beldar
Sundries for carriage of material
Unit
Quantity
day
L.S.
0.40
10.00
Unit
Quantity
Rate
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
10.27.2
Code
2507
0124
0114
9999
10.27.3
Code
2508
0124
0114
9999
Amount
118.80
17.00
530.20
5.30
535.50
80.32
615.82
61.58
61.60
10 x80 mm.
Description
Details of cost for 10 Nos.
MATERIAL:
Carbon Steel galvanised dash fastner (min 5
micron) of 10 mm dia double threaded 6.8
grade counter sunk head screw comprising of
10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 80 mm
Mason (brick layer) 2nd class
Beldar
Sundries for carriage of material
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 nos
10.00
293.00
293.00
day
day
L.S.
0.40
0.40
10.00
361.00
297.00
1.70
144.40
118.80
17.00
573.20
5.73
578.93
86.84
665.77
66.58
66.60
Unit
Quantity
10 x120 mm.
Description
Details of cost for 10 Nos.
MATERIAL:
Carbon Steel galvanised dash fastner (min 5
micron) of 10 mm dia double threaded 6.8
grade counter sunk head screw comprising of
10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 120 mm
Mason (brick layer) 2nd class
Beldar
Sundries for carriage of material
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
582
Rate
Amount
10 nos
10.00
364.00
364.00
day
day
L.S.
0.50
0.50
10.00
361.00
297.00
1.70
180.50
148.50
17.00
710.00
7.10
717.10
107.56
824.66
82.47
82.45
10.27.4
Code
2509
0124
0114
9999
10.27.5
Code
2510
0124
0114
9999
10.28
10 x140 mm.
Description
Unit
Quantity
Rate
Amount
10 Nos
10.00
450.00
450.00
day
day
L.S.
0.50
0.50
10.00
361.00
297.00
1.70
180.50
148.50
17.00
796.00
7.96
803.96
120.59
924.55
92.46
92.45
Unit
Quantity
10 x160 mm.
Description
Details of cost for 10 Nos.
MATERIAL:
Carbon Steel galvanised dash fastner (min 5
micron) of 10 mm dia double threaded 6.8
grade counter sunk head screw comprising of
10 mm dia polyamide PA 6 grade sleave.
Size 10 mm x 160 mm
Mason (brick layer) 2nd class
Beldar
Sundries for carriage of material
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Rate
Amount
10 Nos
10.00
570.00
570.00
day
day
L.S.
0.60
0.60
10.00
361.00
297.00
1.70
216.60
178.20
17.00
981.80
9.82
991.62
148.74
1140.36
114.04
114.05
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories &
stainless steel dash fasteners , stainless steel bolts etc., of required size, on the
top of the floor or the side of waist slab with suitable arrangement as per approval
of Engineer-in-charge, ( for payment purpose only weight of stainless steel
583
4001
4002
0102
0114
0100
9999
9999
9999
Description
Details of cost for 2 kg (length approx. 1 feet).
MATERIAL:
Qty= 2 +
Add wastage @ 5% = 0.10
Total = 2.1 kg
Stainless steel (Grade-304)hollow section
round/square tubes
Stainless steel bolts/square bar and plates
LABOUR:
for fabrication, assembling, errection, welding,
curvaturing, grinding, buffling etc.
Blacksmith Ist class
Beldar
Bandhani
Welding of stainless steel section
Curvaturing, grinding, finishing, buffing
Sundries for making good wall and floors
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 2 kg
Cost of 1 kg
Say
Unit
Quantity
Rate
Amount
kg
2.10
350.00
735.00
kg
1.00
130.00
130.00
day
day
day
L.S.
L.S.
L.S.
0.06
0.20
0.02
30.00
20.00
7.50
393.00
297.00
328.00
1.70
1.70
1.70
23.58
59.40
6.56
51.00
34.00
12.75
1052.29
10.52
1062.81
159.42
1222.23
611.12.
611.10
10.29
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors
with M.S. Flat 15x3 mm and nuts & bolts complete.
10.29.1
Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both
sides.
Code
7029
9999
1008
9999
0103
0112
Description
Details of cost for a window shutter 1.40x
1.10=1.54 sqm.
MATERIAL:
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm.
Galvanised wire mesh of average width of
aperture 1.4 mm and nominal dia of wire
0.63 mm
Carriage
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
Flats up to 10 mm in thickness
Carriage
LABOUR:
Blacksmith 2nd class
Carpenter 2nd class
584
Unit
Quantity
sqm
1.69
250.00
422.50
L.S.
1.82
1.70
3.09
0.0184
1.82
4200.00
1.70
77.28
3.09
0.17
0.17
361.00
361.00
61.37
61.37
quintal
L.S.
day
day
Rate
Amount
Code
0114
9999
Description
Unit
Beldar
Sundries
day
L.S.
Quantity
0.06
19.76
Rate
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1.54 sqm
Cost of 1 sqm
Say
10.29.2
Code
8737
9999
1008
9999
0103
0112
0114
9999
Amount
17.82
33.59
680.11
6.80
686.91
103.04
789.95
512.95
512.95
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on
both sides.
Description
Details of cost for a window shutter 1.40x
1.10=1.54 sqm.
MATERIAL:
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10 %=0.15 sqm
Total=1.69 sqm.
Stainless steel wire guage (Grade-304) aperture
1.4 mm and 0.50 mm dia wire
Carriage
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m
Total=5.25 m
5.25@0.35kg/m=1.84 kg
Flats up to 10 mm in thickness
Carriage
LABOUR:
Blacksmith 2nd class
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1.54 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
1.69
830.00
1402.70
L.S.
1.82
1.70
3.09
quintal
L.S.
0.0184
1.82
4200.00
1.70
77.28
3.09
day
day
day
L.S.
0.17
0.17
0.06
19.76
361.00
361.00
297.00
1.70
61.37
61.37
17.82
33.59
1660.31
16.60
1676.91
251.54
1928.45
1252.24
1252.25
10.30
Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows all complete with.
10.30.1
Code
Description
Unit
585
Quantity
Rate
Amount
Code
2406
9999
0119
9999
10.30.2
Code
2407
9999
0119
9999
Description
Unit
Quantity
Rate
Amount
sqm
1.10
330.00
363.00
L.S.
1.82
1.70
3.09
day
L.S.
0.13
125.58
361.00
1.70
46.93
213.49
626.51
6.27
632.78
94.92
727.70
727.70
586
Unit
Quantity
Rate
Amount
sqm
1.10
500.00
550.00
L.S.
1.82
1.70
3.09
day
L.S.
0.13
125.58
361.00
1.70
46.93
213.49
813.51
8.14
821.65
123.25
944.90
944.90
FLOORING
587
11.1
11.1.1
Code
2602
2201
3.9
0367
2209
0124
0114
0115
0101
11.1.2
Code
2602
2201
3.11
0367
2209
0124
0114
0115
0101
Description
Unit
Quantity
Rate
Amount
1000 Nos
565.00
4800.00
2712.00
1000 Nos
565.00
284.39
160.68
cum
tonne
tonne
0.434
0.02
0.02
3654.15
5240.00
94.80
1585.90
104.80
1.90
day
day
day
day
1.08
0.25
1.62
0.27
361.00
297.00
297.00
328.00
389.88
74.25
481.14
88.56
5599.11
55.99
5655.10
848.26
6503.36
650.34
650.35
Unit
Quantity
589
Rate
Amount
1000 Nos
565.00
4800.00
2712.00
1000 Nos
565.00
284.39
160.68
cum
tonne
tonne
0.434
0.02
0.02
2960.65
5240.00
94.80
1284.92
104.80
1.90
day
day
day
day
1.08
0.25
1.62
0.27
361.00
297.00
297.00
328.00
389.88
74.25
481.14
88.56
5298.13
52.98
5351.11
802.67
6153.78
615.38
615.40
11.2
Code
2602
2201
0983
2261
3.18
0124
0115
0101
Dry brick on edge flooring in required pattern with bricks of class designation 7.5
on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with
common burnt clay non modular bricks.
Description
Unit
Quantity
Rate
Amount
645.00
4800.00
3096.00
645.00
0.15
0.15
284.39
650.00
106.64
183.43
97.50
16.00
0.15
366.20
54.93
0.90
1.98
0.05
361.00
297.00
328.00
324.90
588.06
16.40
4377.22
43.77
4420.99
663.15
5084.14
508.41
508.40
11.3
11.3.1
Code
0295
0297
2202
0982
2203
0367
2209
0124
0114
0101
0127
0002
Description
Unit
590
Quantity
Rate
Amount
cum
0.267
1200.00
320.40
cum
0.089
1050.00
93.45
cum
0.356
106.64
37.96
cum
cum
tonne
tonne
0.178
0.178
0.17
0.17
1120.00
106.64
5240.00
94.80
199.36
18.98
890.80
16.12
day
day
day
day
0.80
1.40
1.04
0.03
361.00
297.00
328.00
393.00
288.80
415.80
341.12
11.79
day
0.03
800.00
24.00
Code
9999
Description
Unit
Sundries
L.S.
Quantity
40.43
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
11.4
Code
0295
0297
2202
0982
2203
0298
2202
0367
0367
2209
7254
9999
0124
0114
0115
0101
9999
Amount
68.73
2727.31
27.27
2754.58
413.19
3167.77
316.78
316.80
52 mm thick cement concrete flooring with concrete hardener topping, under layer
40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener
consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm
nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement
or as per manufacturer's specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.
Description
Unit
591
Quantity
Rate
Amount
cum
0.267
1200.00
320.40
cum
0.089
1050.00
93.45
cum
0.356
106.64
37.96
cum
cum
cum
0.178
0.178
0.115
1120.00
106.64
1100.00
199.36
18.98
126.50
cum
0.115
106.64
12.26
tonne
tonne
tonne
litre
L.S.
0.211
0.02
0.231
2.44
2.73
5240.00
5240.00
94.80
40.00
1.70
1105.64
104.80
21.90
97.60
4.64
day
day
day
day
L.S.
2.15
1.60
1.88
0.27
53.82
361.00
297.00
297.00
328.00
1.70
776.15
475.20
558.36
88.56
91.49
4133.25
41.33
4174.58
626.19
4800.77
480.08
480.10
11.5
Code
0295
0297
2202
0982
2203
0298
2202
0367
0367
2209
7254
9999
0124
0114
0115
0101
9999
62 mm thick cement concrete flooring with concrete hardener topping, under layer
50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener
consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm
nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement
or as per manufactures specifications. This includes cost of cement slurry, but
excluding the cost of nosing of steps etc. complete.
Description
Unit
Quantity
Rate
Amount
cum
0.334
1200.00
400.80
cum
0.111
1050.00
116.55
cum
0.445
106.64
47.45
cum
cum
cum
0.222
0.222
0.115
1120.00
106.64
1100.00
248.64
23.67
126.50
cum
0.115
106.64
12.26
tonne
tonne
tonne
litre
L.S.
0.243
0.02
0.263
2.44
2.73
5240.00
5240.00
94.80
40.00
1.70
1273.32
104.80
24.93
97.60
4.64
day
day
day
day
L.S.
2.15
1.86
1.88
0.27
53.82
361.00
297.00
297.00
328.00
1.70
776.15
552.42
558.36
88.56
91.49
4548.14
45.48
4593.62
689.04
5282.66
528.27
528.25
11.6
Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3
coarse sand), finished with a floating coat of neat cement.
11.6.1
18 mm thick.
Code
Description
Unit
592
Quantity
Rate
Amount
Code
3.8
0367
2209
0124
0115
0101
9999
11.7
Code
4.1.3
0124
0114
0101
9999
11.8
Code
0124
0114
Description
Unit
Quantity
Rate
Amount
cum
tonne
tonne
0.235
0.02
0.02
4347.70
5240.00
94.80
1021.71
104.80
1.90
day
day
day
L.S.
1.88
1.88
0.54
19.76
361.00
297.00
328.00
1.70
678.68
558.36
177.12
33.59
2576.16
25.76
2601.92
390.29
2992.21
299.22
299.20
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) including finishing complete.
Description
Unit
Quantity
Rate
Amount
cum
1.00
4921.70
4921.70 A
day
day
day
L.S.
0.35
0.18
0.05
19.76
361.00
297.00
328.00
1.70
126.35
53.46
16.40
33.59
5151.50
2.30
5153.80
34.82
5188.62
5188.60
Extra for making chequers of approved pattern on cement concrete floors, steps,
landing, pavements etc.
Description
Details of cost for 10 sqm.
LABOUR:
Mason (brick layer) 2nd class
Beldar
593
Unit
Quantity
day
day
0.36
0.36
Rate
361.00
297.00
Amount
129.96
106.92
Code
9999
Description
Unit
L.S.
Quantity
13.52
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
22.98
259.86
2.60
262.46
39.37
301.83
30.18
30.20
11.9
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under
layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 12.5 mm nominal size) and top layer 6 mm thick with white, black,
chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal
size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight
in proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips) by volume
including cement slurry etc. complete.
11.9.1
Code
0296
0297
2202
0982
2203
0367
0367
2209
0785
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
0127
Description
Unit
594
Quantity
Rate
Amount
cum
0.227
1050.00
238.35
cum
0.076
1050.00
79.80
cum
0.303
106.64
32.31
cum
cum
tonne
tonne
tonne
0.151
0.151
0.109
0.02
0.129
1120.00
106.64
5240.00
5240.00
94.80
169.12
16.10
571.16
104.80
12.23
quintal
0.872
200.00
174.40
cum
tonne
tonne
cum
kilogram
0.051
0.0405
0.0405
0.007
2.84
106.64
5240.00
94.80
1000.00
55.00
5.44
212.22
3.84
7.00
156.20
L.S.
3.64
1.70
6.19
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
Code
0002
0013
9999
11.9.2
Code
11.9.1
0875
0874
0368
0367
11.9.3
Code
11.9.1
Description
Unit
Quantity
Rate
Amount
day
0.03
800.00
24.00
day
L.S.
1.60
161.46
350.00
1.70
560.00
274.48
4565.77
45.66
4611.43
691.71
5303.14
530.31
530.30
Unit
Quantity
Rate
Amount
sqm
10.00
530.30
5303.00 A
kilogram
2.84
75.00
213.00
kilogram
-2.84
55.00
-156.20
tonne
0.0405
14000.00
567.00
tonne
-0.0405
5240.00
-212.22
5714.58
4.12
5718.70
62.36
5781.06
578.11
578.10
Medium shade pigment with 50% white cement and 50% ordinary cement.
Description
Unit
595
sqm
Quantity
10.00
Rate
530.30
Amount
5303.00 A
Code
0876
0874
0368
0367
11.9.4
Code
0296
0297
2202
0982
2203
0367
0367
2209
0785
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
Description
Unit
kilogram
kilogram
Quantity
Rate
Amount
2.84
-2.84
65.00
55.00
184.60
-156.20
tonne
0.0203
14000.00
284.20
tonne
-0.0203
5240.00
-106.37
5509.23
2.06
5511.29
31.24
5542.53
554.25
554.25
Unit
596
Quantity
Rate
Amount
cum
0.227
1050.00
238.35
cum
0.076
1050.00
79.80
cum
0.303
106.64
32.31
cum
cum
tonne
tonne
tonne
0.151
0.151
0.109
0.02
0.129
1120.00
106.64
5240.00
5240.00
94.80
169.12
16.10
571.16
104.80
12.23
quintal
0.958
200.00
191.60
cum
tonne
tonne
cum
0.056
0.0405
0.0405
0.007
106.64
14000.00
94.80
1000.00
5.97
567.00
3.84
7.00
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
Code
0013
9999
Description
Unit
day
L.S.
Quantity
1.60
161.46
Rate
350.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
11.9.5
Code
11.9.1
0875
0874
11.9.6
Code
11.9.1
0874
9999
Amount
560.00
274.48
4775.89
47.76
4823.65
723.55
5547.20
554.72
554.70
Unit
Quantity
Rate
Amount
sqm
10.00
530.30
5303.00 A
kilogram
2.84
75.00
213.00
kilogram
-2.84
55.00
-156.20
5359.80
0.57
5360.37
8.61
5368.98
536.90
536.90
Unit
597
Quantity
Rate
Amount
sqm
10.00
530.30
5303.00 A
kilogram
L.S.
-2.84
-7.38
55.00
1.70
-156.20
-12.55
5134.25
-1.69
5132.56
-25.57
5106.99
510.70
510.70
11.10
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under
layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black,
chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal
size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight
in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including
cement slurry etc. complete.
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
598
Quantity
Rate
Amount
cum
0.21
1050.00
220.50
cum
0.07
1050.00
73.50
cum
0.28
106.64
29.86
cum
cum
tonne
tonne
tonne
0.14
0.14
0.1005
0.02
0.1205
1120.00
106.64
5240.00
5240.00
94.80
156.80
14.93
526.62
104.80
11.42
quintal
1.40
200.00
280.00
0.082
0.0578
0.0578
0.012
4.05
106.64
5240.00
94.80
1000.00
55.00
8.74
302.87
5.48
12.00
222.75
L.S.
5.46
1.70
9.28
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
day
L.S.
1.60
134.55
350.00
1.70
560.00
228.74
4710.42
47.10
4757.52
713.63
5471.15
547.12
547.10
cum
tonne
tonne
cum
kilogram
0875
0874
0368
0367
Description
Unit
Quantity
Rate
Amount
sqm
10.00
547.10
5471.00 A
kilogram
4.05
75.00
303.75
kilogram
-4.05
55.00
-222.75
tonne
0.0578
14000.00
809.20
tonne
-0.0578
5240.00
-302.87
6058.33
5.87
6064.20
88.98
6153.18
615.32
615.30
11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement.
Code
11.10.1
0876
0874
0368
0367
Description
Unit
599
Quantity
Rate
Amount
sqm
10.00
547.10
5471.00 A
kilogram
4.05
65.00
263.25
kilogram
-4.05
55.00
-222.75
tonne
0.0289
14000.00
404.60
tonne
-0.0289
5240.00
-151.44
5764.66
2.94
5767.60
44.49
5812.09
581.21
581.20
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
Quantity
Rate
Amount
cum
0.21
1050.00
220.50
cum
0.07
1050.00
73.50
cum
0.28
106.64
29.86
cum
cum
tonne
tonne
tonne
0.14
0.14
0.1005
0.02
0.1205
1120.00
106.64
5240.00
5240.00
94.80
156.80
14.93
526.62
104.80
11.42
quintal
1.40
200.00
280.00
cum
tonne
tonne
cum
0.082
0.0578
0.0578
0.012
106.64
14000.00
94.80
1000.00
8.74
809.20
5.48
12.00
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
day
L.S.
1.60
161.46
350.00
1.70
560.00
274.48
5030.46
50.30
5080.76
762.11
5842.87
584.29
584.30
0875
Description
Unit
600
Quantity
Rate
Amount
10.00
547.10
5471.00 A
2.84
75.00
213.00
Code
0874
Description
Unit
kilogram
Quantity
-2.84
Rate
55.00
TOTAL
Add Water Charges @ 1% except on A i.e on
(5,527.80 - 5,471.00 =) 56.80
TOTAL
Add CPOH @ 15% except on A i.e on
(5,528.37 - 5,471.00 =) 57.37
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
-156.20
5527.80
0.57
5528.37
8.61
5536.98
553.70
553.70
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
601
Quantity
Rate
Amount
cum
0.21
1050.00
220.50
cum
0.07
1050.00
73.50
cum
0.28
106.64
29.86
cum
cum
tonne
tonne
tonne
0.14
0.14
0.1005
0.02
0.1205
1120.00
106.64
5240.00
5240.00
94.80
156.80
14.93
526.62
104.80
11.42
quintal
1.40
200.00
280.00
cum
tonne
tonne
cum
0.082
0.0578
0.0578
0.012
106.64
5240.00
94.80
1000.00
8.74
302.87
5.48
12.00
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
day
L.S.
1.60
134.55
350.00
1.70
560.00
228.74
4478.39
44.78
4523.17
678.48
5201.65
520.17
520.15
11.11
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under
layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black,
chocolate, grey yellow or green marble chips of sizes from 7 mm to 10 mm nominal
size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight
in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume,
including cement Slurry etc. complete.
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
602
Quantity
Rate
Amount
cum
0.19
1050.00
199.50
cum
0.06
1050.00
63.00
cum
0.25
106.64
26.66
cum
cum
tonne
tonne
tonne
0.125
0.125
0.0897
0.02
0.1097
1120.00
106.64
5240.00
5240.00
94.80
140.00
13.33
470.03
104.80
10.40
quintal
1.734
200.00
346.80
cum
tonne
tonne
cum
kilogram
0.102
0.081
0.081
0.017
5.67
106.64
5240.00
94.80
1000.00
55.00
10.88
424.44
7.68
17.00
311.85
L.S.
6.24
1.70
10.61
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
ay
L.S.
1.60
156.13
350.00
1.70
560.00
265.42
4924.53
49.25
4973.78
746.07
5719.85
571.99
572.00
11.11.1
0875
0874
0368
0367
Description
Unit
Quantity
Rate
Amount
sqm
10.00
572.00
5720.00 A
kilogram
5.67
75.00
425.25
kilogram
-5.67
55.00
-311.85
tonne
0.081
14000.00
1134.00
tonne
-0.081
5240.00
-424.44
6542.96
8.23
6551.19
124.68
6675.87
667.59
667.60
11.11.3 Medium shade pigment with 50% white cement and 50% ordinary cement.
Code
11.11.1
0876
0874
0368
0367
Description
Unit
603
Quantity
Rate
Amount
10.00
572.00
5720.00 A
5.67
65.00
368.55
-5.67
55.00
-311.85
0.0405
14000.00
567.00
-0.0405
5240.00
-212.22
6131.48
4.11
6135.59
62.34
6197.93
619.79
619.80
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
Quantity
Rate
Amount
cum
0.19
1050.00
199.50
cum
0.06
1050.00
63.00
cum
cum
cum
tonne
tonne
tonne
0.25
0.125
0.125
0.0897
0.02
0.1097
106.64
1120.00
106.64
5240.00
5240.00
94.80
26.66
140.00
13.33
470.03
104.80
10.40
quintal
1.916
200.00
383.20
cum
tonne
tonne
cum
0.1128
0.081
0.081
0.017
106.64
14000.00
94.80
1000.00
12.03
1134.00
7.68
17.00
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
day
L.S.
1.60
134.55
350.00
1.70
560.00
228.74
5312.50
53.12
5365.62
804.84
6170.46
617.05
617.05
0875
Description
Unit
604
Quantity
Rate
Amount
sqm
10.00
572.00
5720.00 A
kilogram
5.67
75.00
425.25
Code
0874
Description
Unit
kilogram
Quantity
-5.67
Rate
55.00
TOTAL
Add Water Charges @ 1% except on A i.e on
(5,833.40 - 5,720.00 =) 113.40
TOTAL
Add CPOH @ 15% except on A i.e on
(5,834.53 - 5,720.00 =) 114.53
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
-311.85
5833.40
1.13
5834.53
17.18
5851.71
585.17
585.15
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
Description
Unit
605
Quantity
Rate
Amount
cum
0.19
1050.00
199.50
cum
0.06
1050.00
63.00
cum
0.25
106.64
26.66
cum
cum
tonne
tonne
tonne
0.125
0.125
0.0897
0.02
0.1097
1120.00
106.64
5240.00
5240.00
94.80
140.00
13.33
470.03
104.80
10.40
quintal
1.916
200.00
383.20
cum
tonne
tonne
cum
0.1128
0.081
0.081
0.017
106.64
5240.00
94.80
1000.00
12.03
424.44
7.68
17.00
day
day
day
day
day
1.79
1.99
1.04
1.00
0.03
361.00
297.00
328.00
328.00
393.00
646.19
591.03
341.12
328.00
11.79
day
0.03
800.00
24.00
day
L.S.
1.60
134.55
350.00
1.70
560.00
228.74
4602.94
46.03
4648.97
697.35
5346.32
534.63
534.65
11.12
Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish,
top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble
chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder
mix 3 : 1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement
marble powder mix : 7 marble chips) by volume.
11.12.1
3.8
0785
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
9999
Description
Unit
Quantity
Rate
Amount
0.174
4347.70
756.50
0.872
200.00
174.40
0.051
0.0405
0.0405
0.007
2.84
106.64
5240.00
94.80
1000.00
55.00
5.44
212.22
3.84
7.00
156.20
3.64
1.70
6.19
3.00
3.00
1.00
7.00
201.89
361.00
297.00
328.00
328.00
1.70
1083.00
891.00
328.00
2296.00
343.21
6263.00
62.63
6325.63
948.84
7274.47
727.45
727.45
Description
Unit
606
sqm
Quantity
10.00
Rate
727.45
Amount
7274.50 A
Code
0875
0874
0368
0367
Description
Unit
Quantity
Rate
Amount
kilogram
2.84
75.00
213.00
kilogram
-2.84
55.00
-156.20
tonne
0.0405
14000.00
567.00
tonne
-0.0405
5240.00
-212.22
7686.08
4.12
7690.20
62.36
7752.56
775.26
775.25
11.12.1.3 Medium shade pigment with 50% white cement and 50% ordinary cement.
Code
11.12.1.1
0876
0874
0368
0367
Description
Unit
607
Quantity
Rate
Amount
10.00
727.45
7274.50 A
2.84
65.00
184.60
-2.84
55.00
-156.20
0.0203
14000.00
284.20
-0.0203
5240.00
-106.37
7480.73
2.06
7482.79
31.24
7514.03
751.40
751.40
3.8
0785
2268
0368
2209
0784
0124
0114
0101
0139
9999
Description
Unit
Quantity
Rate
Amount
cum
0.174
4347.70
756.50
quintal
0.958
200.00
191.60
cum
tonne
tonne
cum
0.056
0.0405
0.0405
0.007
106.64
14000.00
94.80
1000.00
5.97
567.00
3.84
7.00
day
day
day
day
L.S.
3.00
3.00
1.00
7.00
201.89
361.00
297.00
328.00
328.00
1.70
1083.00
891.00
328.00
2296.00
343.21
6473.12
64.73
6537.85
980.68
7518.53
751.85
751.85
0875
0874
Description
Unit
608
Quantity
Rate
Amount
sqm
10.00
727.45
7274.50 A
kilogram
2.84
75.00
213.00
kilogram
-2.84
55.00
-156.20
7331.30
0.57
7331.87
8.61
7340.48
734.05
734.05
0874
9999
2268
Description
Unit
Quantity
Rate
Amount
10.00
727.45
7274.50 A
-2.84
-3.64
0.007
55.00
1.70
106. 64
-156.20
-6.19
0.75
7112.86
1.62
7111.24
-24.49
7086.75
708.68
708.70
11.13
Providing and fixing glass strips in joints of terrazo / cement concrete floors.
11.13.1
Code
1149
9999
0124
0114
9999
Description
Unit
Quantity
Rate
metre
L.S.
11.00
2.73
9.00
1.70
99.00
4.64
day
day
L.S.
0.25
0.25
13.52
361.00
297.00
1.70
90.25
74.25
22.98
291.12
2.91
294.03
44.10
338.13
33.81
33.80
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 metre
Cost of 1 metre
Say
11.14
Code
0124
Amount
Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width,
including cost of forming, nosing etc.
Description
Details of cost for 10 sqm.
LABOUR:
Mason (brick layer) 2nd class
609
Unit
Quantity
day
0.30
Rate
361.00
Amount
108.30
Code
0114
0115
Description
Unit
Beldar
Coolie
day
day
Quantity
Rate
0.30
0.30
297.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
89.10
89.10
286.50
2.86
289.36
43.40
332.76
33.28
33.30
11.15
Crazy marble stone flooring, including filling the gaps with light shade pigment
with white cement marble powder mixture (3 parts of white cement : 1 part of
marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7
white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal
size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including
rubbing, polishing and cement slurry etc. complete.
11.15.1
Code
11.7
0367
2209
0114
2710
0368
0784
0875
0785
2268
2209
Description
Unit
610
Quantity
Rate
Amount
0.25
5188.60
1297.15 A
0.04
0.04
5240.00
94.80
209.60
3.79
0.50
297.00
148.50
2.40
140.00
336.00
0.0405
0.007
2.84
14000.00
1000.00
75.00
567.00
7.00
213.00
0.872
200.00
174.40
0.051
0.0405
106.64
94.80
5.44
3.84
Code
9999
2216
0123
0114
0115
0139
9999
0101
0013
Description
Unit
L.S.
tonne
day
day
day
day
L.S.
day
day
Quantity
Rate
Amount
3.64
0.24
1.70
94.80
6.19
22.75
1.20
1.00
1.00
5.00
134.55
0.54
4.00
393.00
297.00
297.00
328.00
1.70
328.00
350.00
471.60
297.00
297.00
1640.00
228.74
177.12
1400.00
7506.12
62.09
7568.21
940.66
8508.87
850.89
850.90
11.16
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm,
laid in floors, and landings, jointed with neat cement slurry mixed with pigment
to match the shade of the tiles including rubbing and polishing complete, on 20
mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand).
11.16.1
Code
1201
9999
3.9
0367
0368
2209
0875
0124
0115
0139
0101
0013
Description
Unit
611
Quantity
Rate
Amount
11.00
260.00
2860.00
40.43
1.70
68.73
0.224
0.044
3654.15
5240.00
818.53
230.56
0.044
14000.00
616.00
0.088
3.08
94.80
75.00
8.34
231.00
1.60
2.00
1.00
1.00
1.60
361.00
297.00
328.00
328.00
350.00
577.60
594.00
328.00
328.00
560.00
Code
9999
11.16.2
Code
1202
9999
3.9
0367
0368
2209
0876
0124
0115
0139
0101
0013
9999
11.16.3
Code
1203
Description
Unit
L.S.
Quantity
161.98
Rate
1.70
Amount
275.37
7496.13
74.96
7571.09
1135.66
8706.75
870.68
870.70
Medium shade pigment using 50% white cement and 50% ordinary cement.
Description
Details of cost for 10 sqm.
MATERIAL:
Precast terrazzo tiles 22 mm thick(medium
shade)
including 10% wastage
Carriage of tiles
Cement mortar 1:4( 1 Cement: 4 Coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
Portland Cement
50% white cement for grouting
White Cement
Carriage of cement
Green or blue medium shade pigment
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
Sundries including carborandum stone etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
240.00
2640.00
L.S.
cum
40.43
0.224
1.70
3654.15
68.73
818.53
tonne
0.066
5240.00
345.84
tonne
tonne
kilogram
0.022
0.088
3.08
14000.00
94.80
65.00
308.00
8.34
200.20
day
day
day
day
day
L.S.
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
7052.61
70.53
7123.14
1068.47
8191.61
819.16
819.15
612
Unit
Quantity
sqm
11.00
Rate
220.00
Amount
2420.00
Code
9999
3.9
0367
2209
0874
0124
0115
0139
0101
0013
9999
11.16.4
Code
1203
9999
3.9
0367
2209
0874
0124
0115
0139
0101
0013
9999
Description
Unit
Carriage of tiles
Cement mortar l:4(lCement: 4 Coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Ordinary cement for(i) Cement slurry @
4.4kg/sqm = 44kg+ (ii) Grouting = 44 kg.Total 88kg or 0.088 tonne
Portland Cement
Carriage of cement
Black colour dark shade pigment
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
Sundries including carborandum stone etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
L.S.
40.43
1.70
68.73
cum
0.224
3654.15
818.53
tonne
tonne
kilogram
0.088
0.088
3.08
5240.00
94.80
55.00
461.12
8.34
169.40
day
day
day
day
day
L.S.
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
6609.09
66.09
6675.18
1001.28
7676.46
767.65
767.65
613
Unit
Quantity
Rate
Amount
sqm
11.00
220.00
2420.00
L.S.
40.43
1.70
68.73
cum
0.224
3654.15
818.53
tonne
tonne
kilogram
0.088
0.088
3.08
5240.00
94.80
55.00
461.12
8.34
169.40
day
day
day
day
day
L.S.
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
Code
0874
Description
Unit
kilogram
Quantity
-5.92
Rate
55.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
11.17
Code
0124
0115
0139
Amount
-325.60
6283.49
62.83
6346.32
951.95
7298.27
729.83
729.85
Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.
Description
Details of cost for 10 sqm.
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Unit
Quantity
day
day
day
0.22
0.22
0.65
Rate
361.00
297.00
328.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
79.42
65.34
213.20
357.96
3.58
361.54
54.23
415.77
41.58
41.60
11.18
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm,
in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick
cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry
mixed with pigment to match the shade of the tiles, including rubbing and
polishing complete with tiles of.
11.18.1
Code
1201
9999
3.8
0368
2209
0875
Description
Unit
614
Quantity
Rate
Amount
11.00
260.00
2860.00
40.43
1.70
68.73
0.144
0.066
4347.70
14000.00
626.07
924.00
0.066
4.62
94.80
75.00
6.26
346.50
Code
0124
0115
0139
9999
11.18.2
Code
1202
9999
3.8
0368
0367
2209
0876
0124
0115
0139
9999
11.18.3
Code
1203
Description
Unit
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Sundries including carboranadum stone and
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
day
day
L.S.
Quantity
3.25
3.25
7.60
161.46
Rate
361.00
297.00
328.00
1.70
Amount
1173.25
965.25
2492.80
274.48
9737.34
97.37
9834.71
1475.21
11309.92
1130.99
1131.00
Medium shades pigment using 50% white cement and 50% ordinary cement.
Description
Details of cost for 10 sqm.
MATERIAL:
Precast terrazzo tiles 22 mm thick(medium
shade) including wastage & breakage
Carriage of tiles
Cement mortar 1:3(1 Cement: 3 Coarse sand)
Rate as per Item Number 3.8 of SH: Mortars
50% white cement for slurry
White Cement
50% grey cement for slurry
Portland Cement
Carriage of cement
Green or blue medium shade pigment
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Sundries including carborandum stone and
polishing powder etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
240.00
2640.00
L.S.
40.43
1.70
68.73
cum
0.144
4347.70
626.07
tonne
0.033
14000.00
462.00
tonne
tonne
kilogram
0.033
0.066
4.62
5240.00
94.80
65.00
172.92
6.26
300.30
day
day
day
L.S.
3.25
3.25
7.60
161.46
361.00
297.00
328.00
1.70
1173.25
965.25
2492.80
274.48
9182.06
91.82
9273.88
1391.08
10664.96
1066.50
1066.50
615
Unit
Quantity
sqm
11.00
Rate
220.00
Amount
2420.00
Code
9999
3.8
0367
2209
0874
0124
0115
0139
9999
11.18.4
Code
1203
9999
3.8
0367
2209
0874
0124
0115
0139
9999
0874
Description
Unit
Carriage of tiles
L.S.
Cement mortar. 1:3 (1 Cement: 3 Coarse sand)
Rate as per Item Number 3.8 of SH: Mortars
cum
Grey cement for slurry
Portland Cement
tonne
Carriage of cement
tonne
Black colour dark shade pigment
kilogram
LABOUR:
Mason (brick layer) 2nd class
day
Coolie
day
Skilled Beldar (for floor rubbing etc.)
day
Sundries including carborandum stone and
L.S.
polishing powder etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
40.43
1.70
68.73
0.144
4347.70
626.07
0.066
0.066
4.62
5240.00
94.80
55.00
345.84
6.26
254.10
3.25
3.25
7.60
161.46
361.00
297.00
328.00
1.70
1173.25
965.25
2492.80
274.48
8626.78
86.27
8713.05
1306.96
10020.01
1002.00
1002.00
616
Unit
Quantity
sqm
11.00
220.00
2420.00
L.S.
40.43
1.70
68.73
cum
0.144
4347.70
626.07
tonne
tonne
kilogram
0.066
0.066
4.62
5240.00
94.80
55.00
345.84
6.26
254.10
day
day
day
L.S.
3.25
3.25
7.60
161.46
361.00
297.00
328.00
1.70
1173.25
965.25
2492.80
274.48
-7.46
55.00
-410.30
8216.48
82.16
8298.64
1244.80
9543.44
954.34
954.35
kilogram
Rate
Amount
11.19
11.19.1
Code
1227
9999
3.9
0367
0368
2209
0875
0124
0115
0139
0101
0013
9999
11.19.2
Code
1228
9999
3.9
Description
Unit
Quantity
Rate
Amount
11.00
325.00
3575.00
40.43
1.70
68.73
0.224
3654.15
818.53
0.044
5240.00
230.56
0.044
0.088
3.08
14000.00
94.80
75.00
616.00
8.34
231.00
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
8211.13
82.11
8293.24
1243.99
9537.23
953.72
953.70
Medium shade pigment using 50% white cement, 50% ordinary cement.
Description
Details of cost for 10 sqm.
MATERIAL:
Chequered terrazzo tiles 22 mm thick(medium
shade)
including 10% wastage
Carriage of tiles
Cement mortar 1:4(1 Cemet: 4 Coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Grey cement
(i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg.
Total =66kg or 0.066 tonne
617
Unit
Quantity
Rate
Amount
sqm
11.00
285.00
3135.00
L.S.
40.43
1.70
68.73
cum
0.224
3654.15
818.53
Code
0367
0368
2209
0876
0124
0115
0139
0101
0013
9999
11.19.3
Code
1229
9999
3.9
0367
2209
0874
0124
0115
0139
0101
0013
9999
Description
Unit
Quantity
Rate
Amount
Portland Cement
50% white cement for grouting
White Cement
Carriage of cement
Green or blue medium shade pigment
Labour & sundries:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
Sundries including carborandum stone etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
tonne
0.066
5240.00
345.84
tonne
tonne
kilogram
0.022
0.088
3.08
14000.00
94.80
65.00
308.00
8.34
200.20
day
day
day
day
day
L.S.
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
7547.61
75.48
7623.09
1143.46
8766.55
876.66
876.65
Unit
618
Quantity
Rate
Amount
11.00
250.00
2750.00
40.43
1.70
68.73
0.224
3654.15
818.53
0.088
0.088
3.08
5240.00
94.80
55.00
461.12
8.34
169.40
1.60
2.00
1.00
1.00
1.60
161.98
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
275.37
6939.09
69.39
7008.48
1051.27
8059.75
805.98
806.00
11.19.4
Code
1229
9999
3.9
0367
2209
0874
0124
0115
0139
0101
0013
9999
0874
Unit
Quantity
sqm
11.00
250.00
2750.00
L.S.
40.43
1.70
68.73
cum
0.224
3654.15
818.53
tonne
tonne
kilogram
0.088
0.088
3.08
5240.00
94.80
55.00
461.12
8.34
169.40
day
day
day
day
day
L.S.
1.60
2.00
1.00
1.00
1.60
162.59
361.00
297.00
328.00
328.00
350.00
1.70
577.60
594.00
328.00
328.00
560.00
276.40
-5.92
55.00
-325.60
6614.52
66.15
6680.67
1002.10
7682.77
768.28
768.30
kilogram
Rate
Amount
11.20
11.20.1
Code
7070
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Chequered precast cement concrete tiles
22 mm thick using marble chips of size 6mm Light shade using white cement
including 10% wastage
Carriage of tiles
Cement mortar 1:4(1 Cement: 4 Coarse sand)
619
Unit
Quantity
Rate
Amount
sqm
11.00
470.00
5170.00
L.S.
40.43
1.70
68.73
Code
3.9
0367
0368
2209
0875
0124
0115
0101
11.20.2
Code
7237
9999
3.9
0367
0368
2209
0876
0124
0115
0101
Description
Unit
Quantity
Rate
Amount
cum
0.22
3654.15
803.91
tonne
0.044
5240.00
230.56
tonne
tonne
kilogram
0.048
0.092
3.08
14000.00
94.80
75.00
672.00
8.72
231.00
day
day
day
1.60
2.00
1.00
361.00
297.00
328.00
577.60
594.00
328.00
8684.52
86.85
8771.37
1315.71
10087.08
1008.71
1008.70
Medium shade pigment using 50% white cement 50% Grey cement.
Description
Unit
620
Quantity
Rate
Amount
11.00
370.00
4070.00
40.43
1.70
68.73
0.22
3654.15
803.91
0.068
5240.00
356.32
0.024
0.092
3.08
14000.00
94.80
65.00
336.00
8.72
200.20
1.60
2.00
1.00
361.00
297.00
328.00
577.60
594.00
328.00
7343.48
73.43
7416.91
1112.54
8529.45
852.95
852.95
11.20.3
Code
7236
9999
3.9
0367
2209
0874
0124
0115
0101
11.20.4
Code
7236
9999
3.9
0367
2209
0874
0124
0115
0101
Unit
Quantity
Rate
Amount
sqm
11.00
230.00
2530.00
L.S.
40.43
1.70
68.73
cum
0.22
3654.15
803.91
tonne
tonne
kilogram
0.092
0.092
3.08
5240.00
94.80
55.00
482.08
8.72
169.40
day
day
day
1.60
2.00
1.00
361.00
297.00
328.00
577.60
594.00
328.00
5562.44
55.62
5618.06
842.71
6460.77
646.08
646.10
Unit
621
Quantity
Rate
Amount
sqm
11.00
230.00
2530.00
L.S.
40.43
1.70
68.73
cum
0.22
3654.15
803.91
tonne
tonne
kilogram
0.092
0.092
3.08
5240.00
94.80
55.00
482.08
8.72
169.40
day
day
day
1.60
2.00
1.00
361.00
297.00
328.00
577.60
594.00
328.00
Code
0874
Description
Unit
kilogram
Quantity
-5.92
Rate
55.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
-325.60
5236.84
52.37
5289.21
793.38
6082.59
608.26
608.25
11.21
Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved
make and colour using acid and / or alkali resisting mortar bedding, and joints
filled with acid and / or alkali resisting cement as per IS : 4457, complete as per
the direction of Engineer-in-Charge.
11.21.1
7077
9999
3.9
9999
0367
7024
0367
0123
0115
9999
Description
Unit
622
Quantity
Rate
Amount
10 Nos
12.00
570.00
684.00
L.S.
6.24
1.70
10.61
cum
L.S.
0.012
40.43
3654.15
1.70
43.85
68.73
tonne
0.0033
5240.00
17.29
tonne
0.0079
8150.00
64.39
tonne
-0.0079
5240.00
-41.40
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
1031.22
10.31
1041.53
156.23
1197.76
1197.75
day
day
L.S.
11.21.2
7077
9999
3.9
7024
0367
9999
7024
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
10 Nos
12.00
570.00
684.00
L.S.
6.24
1.70
10.61
cum
0.014
3654.15
51.16
tonne
0.0086
8150.00
70.09
tonne
L.S.
-0.0086
40.43
5240.00
1.70
-45.06
68.73
tonne
0.0033
8150.00
26.90
day
day
L.S.
0.25
0.25
26.91
393.00
297.00
1.70
98.25
74.25
45.75
1084.68
10.85
1095.53
164.33
1259.86
1259.85
11.22
Tile work in skirting, risers of steps and dado upto 2 m height, over 12 mm thick
bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement
slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of
matching shade complete.
11.22.1
11.22.1.1 8 mm thick.
Code
2751
9999
3.8
Description
Unit
623
Quantity
Rate
Amount
sqm
1.061
360.00
381.96
L.S.
3.90
1.70
6.63
cum
0.014
4347.70
60.87
Code
9999
0367
9999
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
L.S.
25.35
1.70
43.10
tonne
L.S.
0.0033
2.08
5240.00
1.70
17.29
3.54
day
day
L.S.
0.25
0.25
16.90
393.00
297.00
1.70
98.25
74.25
28.73
714.62
7.15
721.77
108.27
830.04
830.05
11.23
Marble stone flooring with 18 mm thick marble stone as per sample of marble
approved by Engineer-in- Charge, over 20 mm (average) thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry
including rubbing and polishing complete with.
11.23.1
Code
6001
3.9
0367
9999
0123
0114
0115
0139
0013
9999
Description
Unit
624
Quantity
Rate
Amount
sqm
11.50
1870.00
21505.00
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
4.00
134.55
393.00
297.00
297.00
328.00
350.00
1.70
471.60
297.00
297.00
1640.00
1400.00
228.74
26965.62
269.66
27235.28
4085.29
31320.57
3132.06
3132.05
11.23.2
Code
7071
3.9
0367
9999
0123
0114
0115
0139
0013
9999
11.23.3
Code
7850
3.9
0367
9999
0123
Unit
Quantity
Rate
Amount
sqm
11.50
600.00
6900.00
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
4.00
134.55
393.00
297.00
297.00
328.00
350.00
1.70
471.60
297.00
297.00
1640.00
1400.00
228.74
12360.62
123.61
12484.23
1872.63
14356.86
1435.69
1435.70
Agaria White.
Description
Unit
625
Quantity
Rate
Amount
sqm
11.50
1120.00
12880.00
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
1.20
393.00
471.60
Code
0114
0115
0139
0013
9999
11.23.4
Code
6019
3.9
0367
9999
0123
0114
0115
0139
0013
9999
Description
Unit
Beldar
Coolie
Skilled Beldar (for floor rubbing etc.)
Machine for rubbing of floors
Sundries and carriage of cement etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
day
day
day
L.S.
Quantity
1.00
1.00
5.00
4.00
134.55
Rate
297.00
297.00
328.00
350.00
1.70
Amount
297.00
297.00
1640.00
1400.00
228.74
18340.62
183.41
18524.03
2778.60
21302.63
2130.26
2130.25
Black Zebra.
Description
Unit
626
Quantity
Rate
Amount
sqm
11.50
500.00
5750.00
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
4.00
134.55
393.00
297.00
297.00
328.00
350.00
1.70
471.60
297.00
297.00
1640.00
1400.00
228.74
11210.62
112.11
11322.73
1698.41
13021.14
1302.11
1302.10
11.23.5
Code
6010
3.9
0367
9999
0123
0114
0115
0139
0013
9999
11.23.6
Code
6007
3.9
0367
9999
0123
Unit
Quantity
Rate
Amount
sqm
11.50
690.00
7935.00
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
4.00
134.55
393.00
297.00
297.00
328.00
350.00
1.70
471.60
297.00
297.00
1640.00
1400.00
228.74
13395.62
133.96
13529.58
2029.44
15559.02
1555.90
1555.90
Unit
627
Quantity
Rate
Amount
sqm
11.50
645.00
7417.50
cum
0.224
3654.15
818.53
tonne
L.S.
0.05
26.91
5240.00
1.70
262.00
45.75
day
1.20
393.00
471.60
Code
0114
0115
0139
0013
9999
11.24
Code
0126
0114
0139
9999
11.25
Code
0123
0114
0115
0139
9999
Description
Unit
Beldar
Coolie
Skilled Beldar (for floor rubbing etc.)
Machine for rubbing of floors
Sundries and carriage of cement etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
day
day
day
day
L.S.
Quantity
1.00
1.00
5.00
4.00
134.55
Rate
297.00
297.00
328.00
350.00
1.70
Amount
297.00
297.00
1640.00
1400.00
228.74
12878.12
128.78
13006.90
1951.04
14957.94
1495.79
1495.80
Unit
day
day
day
L.S.
Quantity
2.00
1.50
2.50
53.82
Rate
393.00
297.00
328.00
1.70
Amount
786.00
445.50
820.00
91.49
2142.99
21.43
2164.42
324.66
2489.08
248.91
248.90
Extra for marble stone flooring in treads of steps and risers using single length
up to 2.00 metre.
Description
Unit
day
day
day
day
L.S.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
628
Quantity
1.95
1.40
0.75
3.18
26.91
Rate
393.00
297.00
297.00
328.00
1.70
Amount
766.35
415.80
222.75
1043.04
45.75
2493.69
24.94
2518.63
377.79
2896.42
289.64
289.65
11.26
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of cement mortar 1: 4 (1
cement : 4 coarse sand).
11.26.1
25 mm thick.
Code
1168
2216
3.9
0367
2209
0874
0124
0114
0115
0139
0013
9999
11.27
Code
1168
2216
Description
Unit
Quantity
Rate
Amount
11.50
290.00
3335.00
0.67
94.80
63.52
0.224
3654.15
818.53
0.064
0.064
4.50
5240.00
94.80
55.00
335.36
6.07
247.50
1.20
1.00
1.00
5.00
4.00
208.13
361.00
297.00
297.00
328.00
350.00
1.70
433.20
297.00
297.00
1640.00
1400.00
353.82
9227.00
92.27
9319.27
1397.89
10717.16
1071.72
1071.70
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on
12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed
with grey cement slurry mixed with pigment to match the shade of the slabs,
including rubbing and polishing complete.
Description
Unit
629
Quantity
Rate
Amount
sqm
11.50
290.00
3335.00
tonne
0.67
94.80
63.52
Code
3.8
0367
2209
0874
0124
0114
0115
0139
9999
Description
Unit
Quantity
Rate
Amount
cum
tonne
0.144
0.064
4347.70
5240.00
626.07
335.36
tonne
kilogram
0.064
4.50
94.80
55.00
6.07
247.50
day
day
day
day
L.S.
3.00
3.00
1.00
7.00
174.98
361.00
297.00
297.00
328.00
1.70
1083.00
891.00
297.00
2296.00
297.47
9477.99
94.78
9572.77
1435.92
11008.69
1100.87
1100.85
11.28
11.28.1
Code
1164
9999
3.10
0123
0100
0115
0101
9999
Description
Unit
630
Quantity
Rate
Amount
sqm
L.S.
11.00
34.06
160.00
1.70
1760.00
57.90
cum
0.25
3280.75
820.19
day
day
day
day
L.S.
3.10
1.10
0.55
0.27
10.79
393.00
328.00
297.00
328.00
1.70
1218.30
360.80
163.35
88.56
18.34
4487.44
44.87
4532.31
679.85
5212.16
521.22
521.20
11.28.2
Code
1165
9999
3.10
0123
0100
0115
0101
9999
Unit
Quantity
Rate
Amount
sqm
11.00
180.00
1980.00
L.S.
34.06
1.70
57.90
cum
0.25
3280.75
820.19
day
day
day
day
L.S.
3.10
1.10
0.55
0.27
10.79
393.00
328.00
297.00
328.00
1.70
1218.30
360.80
163.35
88.56
18.34
4707.44
47.07
4754.51
713.18
5467.69
546.77
546.75
11.29
11.29.1
Code
1164
9999
3.10
Description
Unit
631
Quantity
Rate
Amount
sqm
L.S.
11.00
34.06
160.00
1.70
1760.00
57.90
cum
0.25
3280.75
820.19
Code
3.12
0123
0100
0115
0101
9999
11.29.2
Code
1165
9999
3.10
3.12
0123
0100
0115
0101
9999
Description
Unit
Quantity
Rate
Amount
cum
0.023
4993.40
114.85
day
day
day
day
L.S.
3.90
1.10
1.40
0.55
26.91
393.00
328.00
297.00
328.00
1.70
1532.70
360.80
415.80
180.40
45.75
5288.39
52.88
5341.27
801.19
6142.46
614.25
614.25
Unit
632
Quantity
Rate
Amount
sqm
11.00
180.00
1980.00
L.S.
34.06
1.70
57.90
cum
0.25
3280.75
820.19
cum
0.023
4993.40
114.85
day
day
day
day
L.S.
3.90
1.10
1.40
0.55
26.91
393.00
328.00
297.00
328.00
1.70
1532.70
360.80
415.80
180.40
45.75
5508.39
55.08
5563.47
834.52
6397.99
639.80
639.80
11.30
11.30.1
Code
1164
9999
3.10
3.12
0123
0100
0115
0101
9999
0139
0013
11.30.2
Code
1165
9999
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
11.00
34.06
160.00
1.70
1760.00
57.90
cum
0.25
3280.75
820.19
cum
0.023
4993.40
114.85
day
day
day
day
L.S.
3.90
1.10
1.40
0.55
26.91
393.00
328.00
297.00
328.00
1.70
1532.70
360.80
415.80
180.40
45.75
day
day
0.618
0.988
328.00
350.00
202.70
345.80
5836.89
58.37
5895.26
884.29
6779.55
677.96
677.95
Unit
633
Quantity
Rate
Amount
sqm
11.00
180.00
1980.00
L.S.
34.06
1.70
57.90
Code
3.10
3.12
0123
0100
0115
0101
9999
0139
0013
11.31
Code
0126
11.32
Code
0124
0114
Description
Unit
Quantity
Rate
Amount
cum
0.25
3280.75
820.19
cum
0.023
4993.40
114.85
day
day
day
day
L.S.
3.90
1.10
1.40
0.55
26.91
393.00
328.00
297.00
328.00
1.70
1532.70
360.80
415.80
180.40
45.75
day
day
0.618
0.988
328.00
350.00
202.70
345.80
6056.89
60.57
6117.46
917.62
7035.08
703.51
703.50
Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab.
Description
Unit
day
Quantity
1.50
Rate
393.00
Amount
589.50
589.50
5.90
595.40
89.31
684.71
68.47
68.45
Extra for Kota stone / sand stone in treads of steps and risers using single length
up to 1.05 metre.
Description
Unit
day
day
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
634
Quantity
0.20
0.20
Rate
361.00
297.00
Amount
72.20
59.40
131.60
1.32
132.92
19.94
152.86
15.29
15.30
11.33
11.33.1
Code
1190
1231
2204
0682
0111
0114
9999
11.33.2
Code
1194
2500
2204
0682
0111
0114
Description
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
298.10
298.10
725.00
140.00
21612.25
4173.40
cum
100 Nos
0.2981
200.00
121.88
75.00
36.33
150.00
day
day
L.S.
2.68
1.35
33.28
393.00
297.00
1.70
1053.24
400.95
56.58
27482.75
274.83
27757.58
4163.64
31921.22
3192.12
3192.10
Unit
635
Quantity
Rate
Amount
10 cudm
10 cudm
298.10
298.10
500.00
100.00
14905.00
2981.00
cum
100 Nos
0.2981
200.00
121.88
75.00
36.33
150.00
2.16
1.08
393.00
297.00
848.88
320.76
day
day
Code
9999
Description
Sundries for glue etc.
Unit
Quantity
L.S.
26.91
Rate
1.70 4
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
11.34
Code
0313
2211
1187
2204
0111
0114
0115
0130
9999
Amount
5.75
19287.72
192.88
19480.60
2922.09
22402.69
2240.27
2240.25
38 mm thick wood block flooring of first class teak wood laid over 25 mm thick
leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 10mm nominal size) to be paid separately, coated with a thin
layer of hot bitumen (blown type) @ 2.45 kg per sqm, including fixing blocks in
position after dipping in hot bitumen (blown type) up to half depth, planed, levelled
smooth and finished complete.
Description
Unit
636
Quantity
Rate
Amount
tonne
0.0044
37000.00
162.80
tonne
0.0044
106.64
0.47
10 cudm
cum
41.80
0.0418
800.00
121.88
3344.00
5.09
day
day
day
day
L.S.
1.75
2.25
1.50
0.10
80.73
393.00
297.00
297.00
393.00
1.70
687.75
668.25
445.50
39.30
137.24
5490.40
54.90
5545.30
831.80
6377.10
6377.10
11.35
Code
1007
1008
2205
1215
9999
0103
0123
0114
13.50.3
11.36
Code
Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of
M.S. flat 10x5 mm, 10 cm long, forked at end 60 cm apart (minimum three lugs to
be provided), including necessary welding and applying a priming coat of
approved primer on exposed surface etc. complete.
Description
Unit
Quantity
Rate
Amount
quintal
0.12
4650.00
558.00
quintal
tonne
cm
0.0025
0.0122
6.00
4200.00
94.80
1.80
10.50
1.16
10.80
L.S.
9.10
1.70
15.47
day
day
day
0.09
0.45
0.25
361.00
393.00
297.00
32.49
176.85
74.25
sqm
0.60
24.95
14.97 A
894.49
8.80
903.29
133.25
1036.54
89.05
89.05
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-inCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
Description
Unit
637
Quantity
Rate
Amount
Code
7800
9999
3.8
9999
0367
0123
0115
9999
11.37
Code
7801
9999
3.9
9999
0367
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
sqm
1.025
300.00
307.50
L.S.
6.24
1.70
10.61
cum
L.S.
0.014
40.43
4347.70
1.70
60.87
68.73
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.25
0.25
26.91
393.00
297.00
1.70
98.25
74.25
45.75
683.25
6.83
690.08
103.51
793.59
793.60
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
be specified by the manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing
the joints with white cement and matching pigment etc., complete.
Description
Unit
638
Quantity
Rate
Amount
sqm
1.025
365.00
374.12
L.S.
cum
6.24
0.024
1.70
3654.15
10.61
87.70
L.S.
20.20
1.70
34.34
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
707.81
7.08
714.89
107.23
822.12
822.10
11.38
Code
7802
9999
3.9
9999
0367
0123
0115
9999
11.39
Code
7803
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to
be specified by the manufacturer), of 1st quality conforming to IS : 15622, of
approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown,
laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including
pointing the joints with white cement and matching pigments etc., complete.
Description
Unit
Quantity
Rate
Amount
sqm
1.025
375.00
384.37
L.S.
6.24
1.70
10.61
cum
L.S.
0.024
20.20
3654.15
1.70
87.70
34.34
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
718.06
7.18
725.24
108.79
834.03
834.05
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or
more (thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown,
laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including
grouting the joints with white cement and matching pigments etc., complete.
Description
Unit
639
sqm
Quantity
1.025
Rate
515.00
Amount
527.88
Code
9999
3.9
9999
0367
0123
0115
9999
11.40
Code
7804
9999
3.9
9999
0367
0123
0115
9999
Description
Unit
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Portland Cement
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of cement etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Quantity
Rate
Amount
L.S.
6.24
1.70
10.61
cum
L.S.
0.024
13.47
3654.15
1.70
87.70
22.90
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
850.13
8.50
858.63
128.79
987.42
987.40
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more
(thickness to be specified by the manufacturer) of 1st quality conforming to IS :
15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including
pointing the joints with white cement and matching pigments etc., complete.
Description
Unit
640
Quantity
Rate
Amount
sqm
1.025
545.00
558.62
L.S.
6.24
1.70
10.61
cum
L.S.
0.024
13.47
3654.15
1.70
87.70
22.90
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
880.87
8.81
889.68
133.45
1023.13
1023.15
11.41
Providing and laying vitrified floor tiles in different sizes (thickness to be specified
by the manufacturer) with water absorption less than 0.08% and conforming to
IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick
cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with
white cement and matching pigments etc., complete.
11.41.1
Code
8620
9999
3.9
9999
0367
0123
0115
9999
11.41.2
Code
8621
9999
3.9
9999
0367
0123
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
6.24
0.024
745.00
1.70
3654.15
763.62
10.61
87.70
L.S.
3.64
1.70
6.19
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
1069.16
10.69
1079.85
161.98
1241.83
1241.85
Unit
641
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
6.24
0.024
880.00
1.70
3654.15
902.00
10.61
87.70
L.S.
3.64
1.70
6.19
0.0033
5240.00
17.29
0.20
393.00
78.60
tonne
day
Code
0115
9999
11.41.3
Code
8622
9999
3.9
9999
0367
0123
0115
9999
11.41.4
Code
8623
9999
Description
Unit
Coolie
Sundries including carriage of cement etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
day
L.S.
Quantity
0.20
26.91
Rate
297.00
1.70
Amount
59.40
45.75
1207.54
12.08
1219.62
182.94
1402.56
1402.55
Unit
Quantity
Rate
Amount
sqm
L.S.
1.025
6.24
1085.00
1.70
1112.12
10.61
cum
L.S.
0.024
2.60
3654.15
1.70
87.70
4.42
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
1415.89
14.16
1430.05
214.51
1644.56
1644.55
Unit
642
sqm
L.S.
Quantity
1.025
6.24
Rate
1650.00
1.70
Amount
1691.25
10.61
Code
3.9
9999
0367
0123
0115
9999
11.42
Code
3.9
9999
0367
0123
0115
9999
11.43
Code
8731
9999
0123
Description
Unit
Quantity
Rate
Amount
cum
L.S.
0.024
2.60
3654.15
1.70
87.70
4.42
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
1995.02
19.95
2014.97
302.25
2317.22
2317.20
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)
bedding in laying of floor tiles.
Description
Unit
Quantity
Rate
Amount
cum
0.024
3654.15
87.70
L.S.
40.43
1.70
68.73
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.20
0.20
26.91
393.00
297.00
1.70
78.60
59.40
45.75
357.47
3.57
361.04
54.16
415.20
415.20
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer
modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average
3 mm thickness.
Description
Unit
643
Quantity
Rate
Amount
kg
5.00
17.00
85.00
L.S.
40.43
1.70
68.73
day
0.20
393.00
78.60
Code
0115
9999
Description
Unit
Coolie
Sundries i/c carriage of cement etc.
day
L.S.
Quantity
0.20
26.91
Rate
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.44
Code
3.9
0124
0114
0101
9999
0367
2209
0114
2709
9999
3.9
4.18
4.12
Amount
59.40
45.75
337.48
3.37
340.85
51.13
391.98
392.00
Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1
cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the
gaps with ordinary cement mixture & mixing with synthetic polyester fibre,
triangular in shape having specific gravity of 1.34 to 1.40, cross section size
ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per
50 kg of cement in cement mortar, including providing and mixing water proofing
material in mortar @ 1 kg per 50 kg of cement , all complete as per direction of
Engineer-in-charge.
Description
Unit
644
Quantity
Rate
Amount
cum
day
day
day
L.S.
0.14
0.67
0.75
0.92
8.97
3654.15
361.00
297.00
328.00
1.70
511.58
241.87
222.75
301.76
15.25
tonne
tonne
0.04
0.04
5240.00
94.80
209.60
3.79
day
0.50
297.00
148.50
quintal
L.S.
1.20
62.40
135.00
1.70
162.00
106.08
cum
0.03
3654.15
109.62
per bag
of 50kg
of cement
1.38
53.00
73.14 A
per bag
of 50kg
of cement
1.38
44.35
61.20 A
Code
0123
0114
0115
0101
9999
Description
Unit
day
day
day
day
L.S.
Quantity
1.20
1.00
1.00
0.54
67.25
Rate
393.00
297.00
297.00
328.00
1.70
TOTAL
Add Water Charges @ 1% except on A i.e on
(3,524.18 - 134.34 =) 3,389.84
TOTAL
Add CPOH @ 15% except on A i.e on
(3,558.08 - 134.34 =) 3,423.74
Cost of 10 sqm
Cost of 1 sqm
Say
11.45
Code
0295
2202
0114
0115
0101
2.27
2708
0123
0114
9999
Amount
471.60
297.00
297.00
177.12
114.32
3524.18
33.90
3558.08
513.56
4071.64
407.16
407.15
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm
thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate
and base course and filling with 150 mm thick jamuna sand, including spreading,
well ramming, consolidating and finishing smooth etc. all complete as per direction
of Engineer-in-charge.
Description
Unit
645
Quantity
Rate
Amount
cum
1.50
1200.00
1800.00
cum
1.50
106.64
159.96
day
day
day
0.70
0.52
0.36
297.00
297.00
328.00
207.90
154.44
118.08
cum
sqm
1.50
10.00
843.65
1090.00
1265.47 A
10900.00
day
day
L.S.
0.50
1.00
50.00
393.00
297.00
1.70
196.50
297.00
85.00
15184.35
139.19
15323.54
2108.71
17432.25
1743.23
1743.20
11.46
11.46.1
Code
8620
9999
3.8
9999
0367
0123
0115
9999
11.46.2
Code
8621
9999
3.8
9999
0367
0123
0115
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
6.24
0.014
745.00
1.70
4347.70
763.62
10.61
60.87
L.S.
3.64
1.70
6.19
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.25
0.25
26.91
393.00
297.00
1.70
98.25
74.25
45.75
1076.83
10.77
1087.60
163.14
1250.74
1250.75
Unit
646
Quantity
Rate
Amount
sqm
L.S.
1.025
6.24
880.00
1.70
902.00
10.61
cum
L.S.
0.014
3.64
4347.70
1.70
60.87
6.19
tonne
0.0033
5240.00
17.29
0.25
0.25
393.00
297.00
98.25
74.25
day
day
Code
9999
11.46.3
Code
8622
9999
3.8
9999
0367
0123
0115
9999
11.46.4
Code
8623
9999
3.8
9999
Description
Sundries including carriage of quick set
polymer etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Unit
Quantity
L.S.
26.91
Rate
1.70
Amount
45.75
1215.21
12.15
1227.36
184.10
1411.46
1411.45
Unit
Quantity
Rate
Amount
sqm
L.S.
1.025
6.24
1085.00
1.70
1112.12
10.61
cum
L.S.
0.014
3.64
4347.70
1.70
60.87
6.19
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.25
0.25
26.91
393.00
297.00
1.70
98.25
74.25
45.75
1425.33
14.25
1439.58
215.94
1655.52
1655.50
Unit
647
Quantity
Rate
Amount
sqm
L.S.
1.025
6.24
1650.00
1.70
1691.25
10.61
cum
L.S.
0.014
3.64
4347.70
1.70
60.87
6.19
Code
0367
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
Portland Cement
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer
etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
tonne
0.0033
5240.00
17.29
day
day
L.S.
0.25
0.25
26.91
393.00
297.00
1.70
98.25
74.25
45.75
2004.46
20.04
2024.50
303.68
2328.18
2328.20
11.47
11.47.1
Code
8620
9999
8731
0123
0115
9999
11.47.2
Code
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
kg
1.025
6.24
10.00
745.00
1.70
17.00
763.62
10.61
170.00
day
day
L.S.
0.25
0.50
26.91
393.00
297.00
1.70
98.25
148.50
45.75
1236.73
12.37
1249.10
187.36
1436.46
1436.45
Unit
648
Quantity
Rate
Amount
Code
8621
9999
8731
0123
0115
9999
11.47.3
Code
8622
9999
8731
0123
0115
9999
11.47.4
Code
8623
9999
8731
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
Per kg
1.025
6.24
10.00
880.00
1.70
17.00
902.00
10.61
170.00
day
day
L.S.
0.25
0.50
26.91
393.00
297.00
1.70
98.25
148.50
45.75
1375.11
13.75
1388.86
208.33
1597.19
1597.20
Unit
Quantity
Rate
Amount
sqm
L.S.
kg
1.025
6.24
10.00
1085.00
1.70
17.00
1112.12
10.61
170.00
day
day
L.S.
0.25
0.50
26.91
393.00
297.00
1.70
98.25
148.50
45.75
1585.23
15.85
1601.08
240.16
1841.24
1841.25
Unit
649
sqm
L.S.
kg
Quantity
1.025
6.24
10.00
Rate
1650.00
1.70
17.00
Amount
1691.25
10.61
170.00
Code
0123
0115
9999
Description
Unit
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set
polymer etc.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
day
day
L.S.
Quantity
0.25
0.50
26.91
Rate
393.00
297.00
1.70
Amount
98.25
148.50
45.75
2164.36
21.64
2186.00
327.90
2513.90
2513.90
11.48
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy
grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener
and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as
per direction of Engineer-in-charge.
11.48.1
Code
8682
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
kg
0.21
510.00
107.10
day
day
L.S.
0.10
0.10
5.00
393.00
297.00
1.70
39.30
29.70
8.50
184.60
1.85
186.45
27.97
214.42
214.40
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.48
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy
grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener
and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as
per direction of Engineer-in-charge.
11.48.1
Code
8682
0123
0115
Description
Unit
650
Quantity
Rate
Amount
kg
0.21
510.00
107.10
day
day
0.10
0.10
393.00
297.00
39.30
29.70
Code
9999
Description
Sundries including carriage
Unit
Quantity
L.S.
5.00
Unit
Quantity
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.48.2
Code
8682
0123
0115
9999
Code
8682
0123
0115
9999
Description
Details of cost for 1 sqm.
MATERIAL:
Epoxy Grout
LABOUR:
Mason (brick layer) 1 st class
Coolie
Sundries including carriage
Rate
Code
8682
Amount
kg
0.18
510.00
91.80
day
day
L.S.
0.08
0.08
5.00
393.00
297.00
1.70
31.44
23.76
8.50
155.50
1.56
157.06
23.56
180.62
180.60
Unit
Quantity
Rate
Amount
kg
0.15
510.00
76.50
day
day
L.S.
0.06
0.06
5.00
393.00
297.00
1.70
23.58
17.82
8.50
126.40
1.26
127.66
19.15
146.81
146.80
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.48.4
8.50
184.60
1.85
186.45
27.97
214.42
214.40
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.48.3
Amount
Unit
kg
651
Quantity
0.11
Rate
510.00
Amount
56.10
Code
0123
0115
9999
Description
Unit
LABOUR:
Mason (brick layer) 1 st class
Coolie
Sundries including carriage
day
day
L.S.
Quantity
0.04
0.04
5.00
Rate
393.00
297.00
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
Amount
15.72
11.88
8.50
92.20
0.92
93.12
13.97
107.09
107.10
11.49
Providing and laying Vitrified tiles in floor with different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08% and
conforming to IS:15622 , of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive
(water based) conforming to IS : 15477, in average 6 mm thickness, including
grouting of joints (Payment for grouting of joints to be made separately).
11.49.1
Code
8620
9999
8731
0123
0115
9999
11.49.2
Code
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
kg
1.025
6.24
10.00
745.00
1.70
17.00
763.62
10.61
170.00
day
day
L.S.
0.20
0.40
26.91
393.00
297.00
1.70
78.60
118.80
45.75
1187.38
11.87
1199.25
179.89
1379.14
1379.15
Unit
652
Quantity
Rate
Amount
Code
8621
9999
8731
0123
0115
9999
11.49.3
Code
8622
9999
8731
0123
0115
9999
11.49.4
Code
8623
Description
Unit
Quantity
Rate
Amount
sqm
L.S.
kg
1.025
6.24
10.00
880.00
1.70
17.00
902.00
10.61
170.00
day
day
L.S.
0.20
0.40
26.91
393.00
297.00
1.70
78.60
118.80
45.75
1325.76
13.26
1339.02
200.85
1539.87
1539.85
Unit
Quantity
Rate
Amount
sqm
L.S.
per kg
1.025
6.24
10.00
1085.00
1.70
17.00
1112.12
10.61
170.00
day
day
L.S.
0.20
0.40
26.91
393.00
297.00
1.70
78.60
118.80
45.75
1535.88
15.36
1551.24
232.69
1783.93
1783.95
Unit
653
sqm
Quantity
1.025
Rate
1650.00
Amount
1691.25
Code
9999
8731
0123
0115
9999
Description
Unit
Quantity
Rate
Carriage of tiles
High polymer modified quickset tile
adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick
set polymer etc.
L.S.
per kg
6.24
10.00
1.70
17.00
10.61
170.00
day
day
L.S.
0.20
0.40
26.91
393.00
297.00
1.70
78.60
118.80
45.75
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 1 sqm
Say
11.50
Code
9999
9999
11.51
Amount
2115.01
21.15
2136.16
320.42
2456.58
2456.60
Deduct for not grouting the joints with white cement and matching pigment in
the items of fixing of vitrified tiles.
Description
Unit
Quantity
Rate
Amount
L.S.
3.12
1.70
5.30
L.S.
1.00
1.70
1.70
7.00
0.07
7.07
1.06
8.13
8.15
Providing and laying machine cut, mirror polished, Italian Marble stone flooring
laid in required pattern in linear portion of the building all complete as per
architectural drawings, with 18 mm thick stone slab laid over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry
admixed with pigment to match the marble shade including rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Code
Description
Unit
654
Quantity
Rate
Amount
Code
1240
3.9
0368
2209
9999
0123
0114
0115
0139
0013
9999
11.52
Description
Unit
Quantity
Rate
Amount
sqm
11.50
3330.00
38295.00
cum
0.224
3654.15
818.53
tonne
tonne
L.S.
0.05
0.05
26.91
14000.00
94.80
1.70
700.00
4.74
45.75
day
day
day
day
day
L.S.
1.20
1.00
1.00
5.00
4.00
25.74
393.00
297.00
297.00
328.00
350.00
1.70
471.60
297.00
297.00
1640.00
1400.00
43.76
44013.38
440.13
44453.51
6668.03
51121.54
5112.15
5112.15
Providing and laying machine cut, mirror polished Marble stone flooring, in
required design (Simple geometrical, abstract etc.) and in patterns in combination
with Italian marble stones of different colours, shades and finished surface texture
etc., in linear portions of the building, all complete as per the shades and finished
surface texture etc., in linear portions of the building, all complete as per the
architectural drawings, with 18 mm thick stone slab laid over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry
admixed with pigment to match the marble shade including rubbing , curing and
polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark
Emperadore etc.
Code
1240
Description
Unit
655
sqm
Quantity
12.00
Rate
3330.00
Amount
39960.00
Code
3.9
0368
2209
9999
0123
0115
0114
0139
0013
9999
11.53
Code
1242
1243
1244
1245
9999
0123
0115
9999
Description
Unit
Quantity
Rate
Amount
cum
0.224
3654.15
818.53
tonne
tonne
L.S.
0.05
0.05
26.91
14000.00
94.80
1.70
700.00
4.74
45.75
day
day
day
day
day
L.S.
1.75
1.25
1.00
5.00
4.00
25.74
393.00
297.00
297.00
328.00
350.00
1.70
687.75
371.25
297.00
1640.00
1400.00
43.76
45968.78
459.69
46428.47
6964.27
53392.74
5339.27
5339.25
Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20
mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per
direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall
surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm
and grouting of the same. The rate is inclusive of all operation, material and
required pattern approved by Engineer-in-Charge.
Description
Unit
656
Quantity
Rate
Amount
sqm
kg
kg
litre
L.S.
8.20
20.00
10.00
4.00
49.92
1050.00
34.00
34.00
16.00
1.70
8610.00
680.00
340.00
64.00
84.86
day
day
L.S.
1.60
1.60
26.91
393.00
297.00
1.70
628.80
475.20
45.75
10928.61
109.29
11037.90
1655.68
12693.58
1586.70
1586.70
11.54
Providing and fixing removable raised/false access flooring with system and its
components of approved make for different plenum height with possible height
adjustment upto 50 mm, comprising of modular load bearing floor panels
supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all
complete, as per the architectural drawings, as specified and as directed by
Engineer-in-charge consisting of :
a) P roviding at required spacing to form modular framework, pedestals made
out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded
on to the G.I. Base plate of size 100mmx100mmx3mm at the bottom of the pedestal
tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully
threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud
for level adjustment upto 50mm, locking and stabilizing the pedestal head in
position at the required level. The pedestals shall be fixed to the subfloor (base)
through base plate using epoxy based adhesive of approved make or the machine
screw with rawl plug.
b) S tringers system in all steel construction hot dipped galvanized of rectangular
size 570x20x30x0.80 mm thick having holes at both ends for securing the
stringers on to the pedestal head using fully threaded screws ensuring maximum
lateral stability in all directions, the grid formed by the pedestal and stringer
assembly shall receive the floor panel, this system shall provide adequate solid,
rigid support for access floor panel, the system shall provide a minimum clear
uninterrupted clearance between the bottom of the floor for electrical conduits
and wiring etc. all complete as per the architectural drawings, as specified and
as directed by the Engineer-in-charge.
c) P r oviding and fixing Access Floor panel of 600x600x32 mm medium grade
Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access
Floor panel shall be steel welded construction with an enclosed bottom pan with
uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel
Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64
welds in each dome and 20 welds along each flange). The panel should be
Corroresist epoxy coated for lifetime rust protection and cavity formed by the top
and bottom plate is filled with Pyrogrip noncombustible Portland cementitious
core mixed with lightweight foaming compound. The access floor shall be factory
finished with Anti-static High Pressure laminate with Non Warp technology upto
1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel
is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm
without collapse in the centre of the panel which is placed on four steel blocks.
The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/
sqm and an impact load of 50kg all complete as per the approved manufacturers
specification and as per the direction of Engineer-in-charge. All specification must
be printed on the side of the panel to ensure the quality of the product.
11.54.1
Code
2711
Unit
MATERIAL:
Details of cost for 100.00 sqm.
FS800H Grade Flooring Panel ( Size 600 mm
x600 mm x32 mm)
(i/c 5 % wastage)
657
each
Quantity
292.00
Rate
750.00
Amount
219000.00
Code
2712
2714
2715
7048
9999
0111
0114
9999
11.54.2
Code
2711
2713
2714
2715
7048
9999
0111
0114
9999
Description
Unit
Quantity
Rate
Amount
each
each
each
each
L.S.
360.00
570.00
1140.00
1440.00
490.00
140.00
70.00
2.00
10.00
1.70
50400.00
39900.00
2280.00
14400.00
833.00
day
day
L.S.
25.00
25.00
329.00
393.00
297.00
1.70
9825.00
7425.00
559.30
344622.30
3446.22
348068.52
52210.28
400278.80
4002.79
4002.80
Unit
658
Quantity
Rate
Amount
each
292.00
750.00
219000.00
each
each
each
each
L.S.
360.00
570.00
1140.00
1440.00
490.00
150.00
70.00
2.00
10.00
1.70
54000.00
39900.00
2280.00
14400.00
833.00
day
day
L.S.
25.00
25.00
329.00
393.00
297.00
1.70
9825.00
7425.00
559.30
348222.30
3482.22
351704.52
52755.68
404460.20
4044.60
4044.60
ROOFING
659
12.1
Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed
with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and
G.I. limpet washers or with G.I. limpet washers filled with white lead, including a
coat of approved steel primer and two coats of approved paint on overlapping of
sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),
excluding the cost of purlins, rafters and trusses and including cutting to size and
shape wherever required.
12.1.1
1.00 mm thick with zinc coating not less than 275 gm/ m2
Code
3050
2302
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
Description
Unit
661
Quantity
Rate
Amount
23.26
2.326
5400.00
94.80
125604.00
220.50
884.00
25.00
2210.00
810.00
1694.00
110.00
35.00
8910.00
592.90
1694.00
26.91
53.82
30.00
1.70
1.70
508.20
45.75
91.49
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
393.00
361.00
297.00
70.00
1.70
361.00
297.00
1.70
120.00
1.70
361.00
297.00
510.90
5595.50
4603.50
177.10
0.88
407.93
335.61
85.97
450.00
11.49
913.33
751.41
Code
9999
9999
Description
Unit
L.S.
L.S.
Quantity
31.98
38.09
Rate
1.70
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 184.518 sqm
Cost of 1 sqm
Say
12.1.2
Code
3050
2302
Amount
54.37
64.75
152145.58
1521.46
153667.04
23050.06
176717.10
957.72
957.70
0.80 mm thick with zinc coating not less than 275 gm/ m2
Description
Unit
662
quintal
tonne
Quantity
19.02
1.902
Rate
Amount
5400.00
94.80
102708.00
180.31
Code
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999
12.1.3
Code
Description
Unit
10 Nos
884.00
25.00
2210.00
10 Nos
810.00
110.00
8910.00
100 nos
1694.00
35.00
592.90
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
30.00
1.70
1.70
508.20
45.75
91.49
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09
393.00
361.00
297.00
70.00
1.70
361.00
297.00
1.70
120.00
1.70
361.00
297.00
1.70
1.70
510.90
5595.50
4603.50
177.10
0.88
407.93
335.61
85.97
450.00
11.49
913.33
751.41
54.37
64.75
129209.39
1292.09
130501.48
19575.22
150076.70
813.34
813.35
day
day
day
litre
L.S.
day
day
L.S.
litre
L.S.
day
day
L.S.
L.S.
Quantity
Rate
Amount
0.63 mm thick with zinc coating not less than 275 gm/ m2
Description
Unit
663
Quantity
Rate
Amount
Code
3050
2302
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999
Description
Unit
MATERIAL:
C.G.I.Sheets 0.8mm thick
2x27=54Nos. @12.82kg.each = 692.28
kg(X) 2.5mx0.9m is the size of plain G.I.
sheet which on being corrugated will become
2.5mx0.8m (The size of plain sheet is taken
because the weight is available only of plain
sheets) (Refer I.S. Code 277-1962)
2x27=54Nos. of size-2.8x0.9
@13.38kg each = 775.44kg (Y)
Total of (X)+(Y) = 1467.72kg.
Add wastage @5% = 73.39kg.
Total = 1541.11kg = 15.41 q
Galvanised steel corrugated sheets
Carriage of G.I.sheet and accessories
G.I. seam bolts and nuts 60cm centre to
centre zig zag
i.e. 30cm centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 Nos.
2x26(laps)x17 Nos. = 884 Nos
Galvanised steel bolts & nuts 6 mm dia and
25 mm long round head with slots
Galvanised steel J or L hooks 8 mm dia
(No. of purlins to be used 5 on either side)
2x5x27 (No. of sheets)x23 Nos. of bolts in
each sheet = 810 Nos
G.I. Limpet washer
(total of seam and J bolts)
884+810= 1694
Bitumen washer
Carriage of bolts and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Red oxide Zinc chromate primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries.
Roofing paint for iron sheets in red colour
Carriage of paint
Painter
Coolie
Brushes and sandpapers
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 184.518 sqm
Cost of 1 sqm
Say
664
Quantity
Rate
Amount
quintal
tonne
15.41
1.54
5400.00
94.80
83214.00
145.99
10 Nos
884.00
25.00
2210.00
10 Nos
810.00
110.00
8910.00
100 nos
1694.00
35.00
592.90
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
30.00
1.70
1.70
508.20
45.75
91.49
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09
393.00
361.00
297.00
70.00
1.70
361.00
297.00
1.70
120.00
1.70
361.00
297.00
1.70
1.70
510.90
5595.50
4603.50
177.10
0.88
407.93
335.61
85.97
450.00
11.49
913.33
751.41
54.37
64.75
109681.07
1096.81
110777.88
16616.68
127394.56
690.42
690.40
day
day
day
litre
L.S.
day
day
L.S.
litre
L.S.
day
day
L.S.
L.S.
12.2
Extra for straight cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 sq decimeter for chimney stacks, skylight etc.
12.2.1
1.00 mm thick.
Code
0102
0114
12.2.2
Code
0102
0114
12.2.3
Code
0102
0114
Description
Unit
day
Quantity
0.15
0.15
Rate
393.00
297.00
Amount
58.95
44.55
103.50
1.03
104.53
15.68
120.21
40.07
40.05
0.80 mm thick.
Description
Unit
day
day
Quantity
0.12
0.12
Rate
393.00
297.00
Amount
47.16
35.64
82.80
0.83
83.63
12.54
96.17
32.06
32.05
0.63 mm thick.
Description
Unit
665
day
day
Quantity
0.12
0.12
Rate
393.00
297.00
Amount
47.16
35.64
82.80
0.83
83.63
12.54
96.17
32.06
32.05
12.3
Extra for circular cutting in C.G.S. sheet roofing for making opening of area
exceeding 40 square decimeter.
12.3.1
1.00 mm thick.
Code
0102
0114
12.3.2
Code
0102
0114
12.3.3
Code
0102
0114
Description
Unit
day
day
Quantity
3.13
6.26
Rate
393.00
297.00
Amount
1230.09
1859.22
3089.31
30.89
3120.20
468.03
3588.23
228.40
228.40
0.80 mm thick.
Description
Unit
day
day
Quantity
2.50
5.00
Rate
393.00
297.00
Amount
982.50
1485.00
2467.50
24.68
2492.18
373.83
2866.01
182.43
182.45
0.63 mm thick.
Description
Unit
666
day
day
Quantity
2.50
5.00
Rate
393.00
297.00
Amount
982.50
1485.00
2467.50
24.68
2492.18
373.83
2866.01
182.43
182.45
12.4
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen
washers complete.
12.4.1
0.80 mm thick with zinc coating not less than 275 gm/ m2.
Code
0992
2302
0222
1211
1208
9999
9999
0130
0102
0103
0114
12.4.2
Code
0992
2302
Description
Unit
Quantity
Rate
Amount
quintal
tonne
10 Nos
0.58
0.058
28.00
5200.00
94.80
40.00
3016.00
5.50
112.00
100 Nos
100 Nos
L.S.
L.S.
28.00
28.00
1.82
13.52
30.00
30.00
1.70
1.70
8.40
8.40
3.09
22.98
day
day
day
day
0.40
1.20
0.80
2.40
393.00
393.00
361.00
297.00
157.20
471.60
288.80
712.80
4806.77
48.07
4854.84
728.23
5583.07
539.43
539.45
0.63 mm thick with zinc coating not less than 275 gm/ m2.
Description
Unit
quintal
tonne
667
Quantity
0.47
0.047
Rate
5200.00
94.80
Amount
2444.00
4.46
Code
0222
1211
1208
9999
9999
0130
0102
0103
0114
Description
Unit
Quantity
Rate
Amount
10 Nos
28.00
40.00
112.00
100 Nos
100 Nos
L.S.
L.S.
28.00
28.00
1.82
13.52
30.00
30.00
1.70
1.70
8.40
8.40
3.09
22.98
day
day
day
day
0.40
1.20
0.80
2.40
393.00
393.00
361.00
297.00
157.20
471.60
288.80
712.80
4233.73
42.34
4276.07
641.41
4917.48
475.12
475.10
12.5
Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated
J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
12.5.1
1.60 mm thick with zinc coating not less than 350 gm/ m2.
Code
0992
2302
0222
1211
1208
9999
9999
0130
0102
0103
0114
Description
Unit
668
Quantity
Rate
Amount
quintal
tonne
10 Nos
1.222
0.12
12.00
5200.00
94.80
40.00
6354.40
11.38
48.00
100 Nos
100 Nos
L.S.
L.S.
12.00
12.00
0.91
13.52
30.00
30.00
1.70
1.70
3.60
3.60
1.55
22.98
day
day
day
day
0.40
1.20
0.80
2.40
393.00
393.00
361.00
297.00
157.20
471.60
288.80
712.80
8075.91
80.76
8156.67
1223.50
9380.17
1005.92
1005.90
12.6
Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer
coated J, or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete,
bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 coarse sand).
12.6.1
1.00 mm thick with zinc coating not less than 275 gm/ m2.
Code
0992
2302
0222
1207
1208
9999
9999
0130
0102
0103
0114
Description
Unit
Quantity
Rate
Amount
quintal
tonne
10 Nos
0.4211
0.041
6.00
5200.00
94.80
40.00
2189.72
3.89
24.00
100 nos
100 Nos
L.S.
L.S.
6.00
6.00
0.39
10.79
35.00
30.00
1.70
1.70
2.10
1.80
0.66
18.34
day
day
day
day
0.50
1.48
1.00
3.00
393.00
393.00
361.00
297.00
196.50
581.64
361.00
891.00
4270.65
42.71
4313.36
647.00
4960.36
409.10
409.10
12.7
Providing and fixing 15 cm wide, 45 cm overall semi circular plain G.S. sheet gutter
with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making
necessary connections with rain water pipes complete.
12.7.1
0.80 mm thick with zinc coating not less than 275 gm/ m2.
Code
0992
2302
1008
Description
Unit
quintal
tonne
quintal
669
Quantity
0.3164
0.0316
0.0749
Rate
5200.00
94.80
4200.00
Amount
1645.28
3.00
314.58
Code
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114
12.7.2
Code
0992
2302
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
Description
Unit
Quantity
Rate
Amount
10 Nos
20.00
25.00
50.00
each
30.00
12.00
360.00
100 Nos
100 Nos
L.S.
L.S.
70.00
40.00
2.73
5.33
32.00
30.00
1.70
1.70
22.40
12.00
4.64
9.06
day
day
L.S.
day
day
day
day
0.50
0.50
12.61
0.28
0.84
0.62
1.68
393.00
297.00
1.70
393.00
393.00
361.00
297.00
196.50
148.50
21.44
110.04
330.12
223.82
498.96
3950.34
39.50
3989.84
598.48
4588.32
507.56
507.55
0.63 mm thick with zinc coating not less than 275 gm/ m2.
Description
Unit
670
Quantity
Rate
Amount
quintal
tonne
quintal
10 Nos
0.2364
0.0236
0.0749
20.00
5200.00
94.80
4200.00
25.00
1229.28
2.24
314.58
50.00
each
30.00
12.00
360.00
100 Nos
100 Nos
L.S.
L.S.
70.00
40.00
2.73
5.33
32.00
30.00
1.70
1.70
22.40
12.00
4.64
9.06
day
day
L.S.
day
day
day
0.50
0.50
12.61
0.28
0.84
0.62
393.00
297.00
1.70
393.00
393.00
361.00
196.50
148.50
21.44
110.04
330.12
223.82
Code
0114
Description
Beldar
Unit
Quantity
day
1.68
Rate
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 9.04 metre
Cost of 1 metre
Say
12.8
Code
0223
2273
1023
1208
1209
9999
9999
0130
0112
0114
Amount
498.96
3533.58
35.34
3568.92
535.34
4104.26
454.01
454.00
Unit
671
Quantity
Rate
Amount
sqm
237.93
250.00
59482.50
tonne
10 Nos
100 Nos
100 Nos
L.S.
L.S.
3.184
476.00
476.00
476.00
8.06
39.52
94.80
110.00
30.00
35.00
1.70
1.70
301.84
5236.00
142.80
166.60
13.70
67.18
2.34
9.34
9.34
393.00
361.00
297.00
919.62
3371.74
2773.98
72475.96
724.76
73200.72
10980.11
84180.83
389.47
389.45
day
day
day
12.9
Code
0111
0114
12.10
Code
0111
0114
12.11
Code
1008
2205
9999
Extra for straight cutting in polypropylene reinforced cement corrugated, semicorrugated 6 mm thick sheet roofing for making openings of area exceeding 40
square decimeter for chimney stacks, skylights etc.
Description
Unit
day
day
Quantity
0.12
0.12
Rate
393.00
297.00
Amount
47.16
35.64
82.80
0.83
83.63
12.54
96.17
32.06
32.05
Extra for circular cutting in polypropylene reinforced cement corrugated / semicorrugated 6 mm thick sheet roofing for making openings of area exceeding 40
square decimeter.
Description
Unit
day
day
Quantity
1.00
1.00
Rate
393.00
297.00
Amount
393.00
297.00
690.00
6.90
696.90
104.54
801.44
88.56
88.55
Extra for providing and fixing wind ties of 40x6 mm flat iron section.
Description
Unit
quintal
tonne
L.S.
672
Quantity
0.5985
0.06
20.67
Rate
4200.00
94.80
1.70
Amount
2513.70
5.69
35.14
Code
0102
0114
Description
Unit
day
day
Quantity
0.50
0.50
Rate
393.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 30 metre
Cost of 1 metre
Say
12.12
Amount
196.50
148.50
2899.53
29.00
2928.53
439.28
3367.81
112.26
112.25
Providing and fixing ridges and hips in fibre cement high impact polypropylene
reinforced roofing with suitable fixing accessories or self drilling fastener and
EPDM washer etc. complete.
0225
9999
9999
0130
0112
0114
Description
Unit
673
Quantity
Rate
Amount
metre
24.339
210.00
5111.19
L.S.
13.52
1.70
22.98
L.S.
6.76
1.70
11.49
day
day
day
0.14
0.55
1.64
393.00
361.00
297.00
55.02
198.55
487.08
5886.31
58.86
5945.17
891.78
6836.95
338.46
338.45
0226
9999
9999
0130
0112
0114
Description
Unit
Quantity
Rate
Amount
metre
24.339
200.00
4867.80
L.S.
13.52
1.70
22.98
L.S.
6.76
1.70
11.49
day
day
day
0.14
0.55
1.64
393.00
361.00
297.00
55.02
198.55
487.08
5642.92
56.43
5699.35
854.90
6554.25
324.47
324.45
0224
9999
9999
0130
0112
0114
Description
Unit
674
Quantity
Rate
Amount
metre
28.182
210.00
5918.22
L.S.
L.S.
16.12
7.15
1.70
1.70
27.40
12.16
day
day
day
0.14
0.55
1.64
393.00
361.00
297.00
55.02
198.55
487.08
6698.43
66.98
6765.41
1014.81
7780.22
385.16
385.15
0227
9999
9999
0130
0112
0114
12.13
Description
Unit
metre
Quantity
Rate
Amount
24.339
300.00
7301.70
L.S.
L.S.
6.76
6.63
1.70
1.70
11.49
11.27
day
day
day
0.14
0.55
1.64
393.00
361.00
297.00
55.02
198.55
487.08
8065.11
80.65
8145.76
1221.86
9367.62
463.74
463.75
Providing and fixing fibre cement high impact polypropylene reinforced roofing
accessories in all colours with polymer coated J or L hooks, bolts and nuts and or
G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener
and EPDM washer etc. complete.
0228
9999
9999
0130
0112
0114
Description
Unit
675
Quantity
Rate
Amount
metre
23.52
225.00
5292.00
L.S.
3.25
1.70
5.52
L.S.
3.25
1.70
5.52
day
day
day
0.07
0.28
0.82
393.00
361.00
297.00
27.51
101.08
243.54
5675.17
56.75
5731.92
859.79
6591.71
326.32
326.30
0229
9999
9999
0130
0112
0114
Description
Unit
Quantity
Rate
Amount
each
21.00
175.00
3675.00
L.S.
3.25
1.70
5.52
L.S.
3.25
1.70
5.52
day
day
day
0.07
0.28
0.82
393.00
361.00
297.00
27.51
101.08
243.54
4058.17
40.58
4098.75
614.81
4713.56
233.34
233.35
0230
1023
1209
1208
9999
9999
0130
0112
0114
Description
Unit
676
Quantity
Rate
Amount
21.336
310.00
6614.16
40.00
40.00
40.00
9.88
6.24
110.00
35.00
30.00
1.70
1.70
440.00
14.00
12.00
16.80
10.61
0.10
0.30
1.00
393.00
361.00
297.00
39.30
108.30
297.00
7552.17
75.52
7627.69
1144.15
8771.84
434.25
434.25
0231
1023
1209
1208
9999
9999
0130
0112
0114
Description
Unit
Quantity
Rate
Amount
each
21.336
410.00
8747.76
10 Nos
100 Nos
100 Nos
L.S.
L.S.
40.00
40.00
40.00
9.88
6.24
110.00
35.00
30.00
1.70
1.70
440.00
14.00
12.00
16.80
10.61
day
day
day
0.10
0.30
1.00
393.00
361.00
297.00
39.30
108.30
297.00
9685.77
96.86
9782.63
1467.39
11250.02
556.93
556.95
0232
0222
1211
1208
9999
9999
0130
0112
0114
Description
Unit
677
Quantity
Rate
Amount
metre
10.50
410.00
4305.00
10 Nos
100 Nos
100 Nos
L.S.
L.S.
5.00
10.00
5.00
9.36
6.76
40.00
30.00
30.00
1.70
1.70
20.00
3.00
1.50
15.91
11.49
day
day
day
0.04
0.06
0.40
393.00
361.00
297.00
15.72
21.66
118.80
4513.08
45.13
4558.21
683.73
5241.94
540.41
540.40
12.13.6
Ridge finials.
Code
Description
0233
9999
12.13.7
Code
Description
0234
1023
1209
1208
9999
9999
0130
0112
0114
Unit
Amount
1.05
160.00
168.00
L.S.
10.79
1.70
18.34
186.34
1.86
188.20
28.23
216.43
216.45
Unit
678
Rate
pair
Quantity
Quantity
Rate
Amount
21.00
550.00
11550.00
40.00
40.00
40.00
9.88
6.24
110.00
35.00
30.00
1.70
1.70
440.00
14.00
12.00
16.80
10.61
0.10
0.30
1.00
393.00
361.00
297.00
39.30
108.30
297.00
12488.01
124.88
12612.89
1891.93
14504.82
725.24
725.25
12.13.8
S type louvers.
Code
Description
0235
9999
1031
1032
1208
1210
9999
9999
0111
0114
0102
Unit
Quantity
Rate
Amount
each
5.25
250.00
1312.50
L.S.
each
10.79
6.00
1.70
25.00
18.34
150.00
each
6.00
20.00
120.00
100 Nos
100 Nos
L.S.
L.S.
18.00
36.00
2.73
13.39
30.00
32.00
1.70
1.70
5.40
11.52
4.64
22.76
day
day
day
1.00
1.00
0.12
393.00
297.00
393.00
393.00
297.00
47.16
2382.32
23.82
2406.14
360.92
2767.06
316.60
316.60
12.14
Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers
etc. for fixing asbestos cement/G.S. sheets gutters with purlins.
Code
Description
1008
1025
1210
9999
0102
0114
Unit
679
Quantity
Rate
Amount
quintal
10 Nos
0.1163
38.00
4200.00
30.00
488.46
114.00
100 Nos
L.S.
day
day
19.00
1.04
0.38
0.38
32.00
1.70
393.00
297.00
6.08
1.77
149.34
112.86
872.51
8.73
881.24
132.19
1013.43
50.67
50.65
12.15
12.15.1
Code
Description
0309
0771
0370
2211
0982
2203
0114
0131
9999
Unit
Quantity
Rate
Amount
tonne
0.017
40000.00
680.00
litre
quintal
tonne
cum
cum
1.22
0.035
0.017
0.06
0.06
45.00
400.00
106.64
1120.00
106.64
54.90
14.00
1.81
67.20
6.40
day
0.38
297.00
112.86
day
L.S.
0.15
13.52
361.00
1.70
54.15
22.98
1014.30
10.14
1024.44
153.67
1178.11
117.81
117.80
12.16
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35
kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and
covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine
sand) mixed with 2% of integral water proofing compound by weight of cement
and finished neat.
12.16.1
With common burnt clay F.P.S. (non modular) brick tile of class designation 10.
Code
Description
0811
3.18
Unit
680
Quantity
Rate
Amount
cum
1.257
60.00
75.42
cum
0.263
366.20
96.31
Code
0308
9999
9999
9999
1984
2207
3.3
1213
9999
0124
0114
0101
Description
Unit
5% wastage = 0.46
= 9.66 kg Say 0.1 quintal
Bhusa
Cowdung
Mud mortar for gobri leaping
Carriage of bhusa and cowdung
Tile bricks 22.9x11.4x4.4cm of designation
100
Common burnt clay F.P.S. bricks tile class
designation 10
Carriage of brick tiles
Cement mortar for grouting 1:3 (1 cement
3 fine sand)
Rate as per Item Number 3.3 of SH: Mortars
Integral water proofing compound 2% by
weight of cement
Water proofing materials
Sundries
LABOUR:
Mason (brick layer) 2nd class
Beldar
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
quintal
L.S.
L.S.
L.S.
Quantity
Rate
Amount
0.10
5.33
8.06
2.73
400.00
1.70
1.70
1.70
40.00
9.06
13.70
4.64
1000 Nos
380.00
4800.00
1824.00
1000 Nos
380.00
170.63
64.84
cum
0.061
3844.80
234.53
kilogram
L.S.
0.006
6.76
32.00
1.70
0.19
11.49
day
day
day
1.30
3.75
1.10
361.00
297.00
328.00
469.30
1113.75
360.80
4318.03
43.18
4361.21
654.18
5015.39
501.54
501.55
12.17
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated and plastered with 25 mm thick mud mortar with bhusha @ 35 kg
per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered
with machine moulded tile bricks, grouted with cement mortar 1:3 ( 1 cement : 3
fine sand) mixed with 2% of integral water proofing compound by weight of cement
and finished neat.
12.17.1
with machine moulded common burnt clay F.P.S. (non modular) brick tiles of class
designation - 12.50, conforming to IS - 2690.
Code
Description
0811
3.18
Unit
681
Quantity
Rate
Amount
cum
1.257
60.00
75.42
cum
0.263
366.20
96.31
Code
0308
9999
9999
9999
7904
2207
3.3
1213
9999
0124
0114
0101
Description
Unit
Bhusa
Cowdung
Mud mortar for gobri leaping
Carriage of bhusa and cowdung
Machine moulded common burnt clay tile
bricks of class designation 12.5
Carriage of brick tiles
Cement mortar for grouting 1:3 (1 cement:
3 fine sand)
Rate as per Item Number 3.3 of SH: Mortars
Integral water proofing compound 2% by
weight of cement
Water proofing materials
Sundries
LABOUR:
Mason (brick layer) 2nd class
Beldar
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Quantity
0.10
5.33
8.06
2.73
380.00
400.00
1.70
1.70
1.70
5000.00
40.00
9.06
13.70
4.64
1900.00
1000 Nos
380.00
170.63
64.84
cum
0.061
3844.80
234.53
kilogram
L.S.
0.006
6.76
32.00
1.70
0.19
11.49
day
day
day
1.30
3.75
1.10
361.00
297.00
328.00
469.30
1113.75
360.80
4394.03
43.94
4437.97
665.70
5103.67
510.37
510.35
Code
Description
0811
0114
0101
9999
Unit
682
Amount
quintal
L.S.
L.S.
L.S.
1000 Nos
12.18
Rate
cum
day
day
L.S.
Quantity
0.13
0.07
0.04
26.91
Rate
60.00
297.00
328.00
1.70
Amount
7.80
20.79
13.12
45.75
87.46
0.87
88.33
13.25
101.58
10.16
10.15
12.19
Providing and laying brick tiles over mumty roofs grouted with cement mortar
1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound
by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine
sand) and finished neat.
12.19.1
With common burnt clay F.P.S. (non modular) brick tiles class designation 10.
Code
Description
1984
2207
3.3
1213
0124
0115
0101
9999
Unit
Quantity
Rate
Amount
1000 Nos
380.00
4800.00
1824.00
1000 Nos
380.00
170.63
64.84
cum
0.179
3844.80
688.22
kilogram
0.005
32.00
0.16
day
day
day
L.S.
0.81
1.08
0.27
1.82
361.00
297.00
328.00
1.70
292.41
320.76
88.56
3.09
3282.04
32.82
3314.86
497.23
3812.09
381.21
381.20
12.20
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal
thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4
coarse sand) mixed with 2% integral water proofing compound, laid over a bed of
20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat
complete.
Code
Description
7266
2207
3.9
1213
3.9
0123
0114
Unit
683
Quantity
Rate
Amount
160.00
12150.00
1944.00
160.00
170.63
27.30
0.037
3654.15
135.20
0.01
32.00
0.32
0.224
3654.15
818.53
0.60
2.60
393.00
297.00
235.80
772.20
Code
9999
Description
Unit
Sundries
L.S.
Quantity
13.00
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Amount
22.10
3955.45
39.55
3995.00
599.25
4594.25
459.43
459.40
12.21
12.21.1
Code
Description
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
0123
0124
9999
0123
0124
0114
9999
3.3
0155
0115
0101
9999
9999
Unit
684
Quantity
Rate
Amount
cum
0.0836
1050.00
87.78
cum
0.0836
106.64
8.92
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
day
day
L.S.
day
day
day
L.S.
0.0418
0.0418
0.03
0.03
0.085
0.056
0.025
0.005
0.005
0.0037
2.47
1.30
0.15
0.15
5.07
0.25
0.25
1.00
8.06
1120.00
106.64
5240.00
94.80
297.00
297.00
328.00
393.00
361.00
328.00
1.70
1.70
393.00
361.00
1.70
393.00
361.00
297.00
1.70
46.82
4.46
157.20
2.84
25.24
16.63
8.20
1.96
1.80
1.21
4.20
2.21
58.95
54.15
8.62
98.25
90.25
297.00
13.70
cum
day
day
day
L.S.
L.S.
0.009
0.081
0.101
0.033
1.69
1.43
3844.80
377.00
297.00
328.00
1.70
1.70
34.60
30.54
30.00
10.82
2.87
2.43
1101.65
11.02
1112.67
166.90
1279.57
127.96
127.95
12.22
Code
Description
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
3002
3.8
0155
0115
0101
9999
0367
2209
0155
0115
9999
9999
Unit
Quantity
Rate
Amount
cum
0.0067
1200.00
8.04
cum
0.0022
1050.00
2.31
cum
0.0089
106.64
0.95
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
sqm
0.0044
0.0044
0.0032
0.0032
0.009
0.006
0.0027
0.0005
0.0005
0.0004
0.26
0.13
1.00
1120.00
106.64
5240.00
94.80
297.00
297.00
328.00
393.00
361.00
328.00
1.70
1.70
35.00
4.93
0.47
16.77
0.30
2.67
1.78
0.89
0.20
0.18
0.13
0.44
0.22
35.00
cum
day
day
day
L.S.
tonne
tonne
day
day
L.S.
L.S.
0.0041
0.0235
0.0235
0.0078
0.39
0.0006
0.0006
0.008
0.008
0.26
13.52
4347.70
377.00
297.00
328.00
1.70
5240.00
94.80
377.00
297.00
1.70
1.70
17.83
8.86
6.98
2.56
0.66
3.14
0.06
3.02
2.38
0.44
22.98
144.19
1.44
145.63
21.84
167.47
167.45
12.23
Providing sand stone slab for roofing and laying them in cement mortar 1:4 (1
cement : 4 coarse sand) over wooden karries or RCC battens or structural steel
sections (Karries or battens or structural steel sections to be paid separately),
inc!uding pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine
sand) complete.
12.23.1
685
12.23.1.1
Code
1174
2216
3.9
3.3
0155
0100
0115
0101
9999
40 to 50 mm thick.
Description
Details of cost for 10 sqm.
MATERIAL:
Red sand stone slab 45 mm to 50 mm thick
(un- dressed)
including wastage @ 10% = 11 sqm
Carriage of stone blocks white & red sand
stone & kota stone slab
Cement mortar l:4 (1 cement : 4 coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Cement mortar for grouting 1:3(1 cement :
3 fine sand)
Rate as per Item Number 3.3 of SH: Mortars
LABOUR:
Mason (average)
Bandhani
Coolie
Bhisti
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
12.23.2
12.23.2.1
40 to 50 mm thick.
Code
1175
2216
3.9
0155
0100
0115
0101
9999
3.3
Unit
Description
686
Rate
Amount
sqm
11.00
172.00
1892.00
tonne
1.27
94.80
120.40
cum
0.0095
3654.15
34.71
cum
0.0075
3844.80
28.84
day
day
day
day
L.S.
1.52
1.82
1.52
0.30
16.12
377.00
328.00
297.00
328.00
1.70
573.04
596.96
451.44
98.40
27.40
3823.19
38.23
3861.42
579.21
4440.63
444.06
444.05
Unit
Quantity
Quantity
Rate
Amount
sqm
11.00
225.00
2475.00
tonne
1.27
94.80
120.40
cum
day
day
day
day
L.S.
0.0095
1.52
1.82
1.52
0.30
16.12
3654.15
377.00
328.00
297.00
328.00
1.70
34.71
573.04
596.96
451.44
98.40
27.40
cum
0.0075
3844.80
28.84
4406.19
44.06
4450.25
667.54
5117.79
511.78
511.80
12.24
Providing and fixing insulating board ceiling of approved quality with necessary
nails etc. complete (frame work to be paid separately).
12.24.1
12.24.1.1
12 mm thick.
Code
0332
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Natural colour insulating board:12 mm thick
including 10% wastage = 11.00 sqm
Carriage of material
Nails
LABOUR
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
12.24.2
12.24.2.1
12 mm thick.
Code
0328
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
White face insulating board:12 mm thick
including 10% wastage = 11.00 sqm
Carriage of material
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
687
Unit
Quantity
Rate
sqm
11.00
270.00
2970.00
L.S.
L.S.
17.55
26.91
1.70
1.70
29.84
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
4727.73
47.28
4775.01
716.25
5491.26
549.13
549.15
Unit
Quantity
sqm
11.00
360.00
3960.00
L.S.
L.S.
17.55
26.91
1.70
1.70
29.84
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
5717.73
57.18
5774.91
866.24
6641.15
664.12
664.10
Rate
Amount
Amount
12.24.3
12.24.3.1
12 mm thick.
Code
0336
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Flame retardant face insulating board: 12 mm
thick
including 10% wastage = 11.00 sqm
Carriage of material
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
315.00
3465.00
L.S.
L.S.
17.55
26.91
1.70
1.70
29.84
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
5222.73
52.23
5274.96
791.24
6066.20
606.62
606.60
12.25
Providing and fixing flat pressed 3 layer medium density particle board or graded
particle board (Grade I) IS : 3087 marked, in ceiling with necessary nails etc.
complete (frame work to be paid separately).
12.25.1
12 mm thick.
Code
0341
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Flat pressed 3 layer particle board (medium
density) Grade 1, 12 mm thick
including 10% wastage = 11.00 sqm
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
688
Unit
Quantity
Rate
Amount
sqm
11.00
325.00
3575.00
L.S.
L.S.
14.95
26.91
1.70
1.70
25.42
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
5328.31
53.28
5381.59
807.24
6188.83
618.88
618.90
12.26
Providing and fixing plain Multipurpose Cement board ( High Pressure steam
cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling
etc. complete (frame work to be paid separately).
12.26.1
Code
0236
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10 sqm.
MATERIAL:
Multi purpose fibre (high impact poly propelene
reinforced) cement board 6 mm thick
including 10% wastage = 11.00 sqm
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
sqm
11.00
200.00
2200.00
L.S.
L.S.
14.95
26.91
1.70
1.70
25.42
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
3953.31
39.53
3992.84
598.93
4591.77
459.18
459.20
12.27
12.27.1
Code
1190
2204
0637
0111
0112
0114
9999
9999
Description
Unit
689
Quantity
Rate
Rate
Amount
Amount
10 cudm
cum
100 nos
43.00
0.043
31.00
725.00
121.88
50.00
3117.50
5.24
15.50
day
day
day
L.S.
L.S.
2.65
0.145
2.79
7.80
14.69
393.00
361.00
297.00
1.70
1.70
1041.45
52.34
828.63
13.26
24.97
5098.89
50.99
5149.88
772.48
5922.36
376.98
377.00
12.27.2
12.27.2.1
12 mm thick.
Code
0332
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Details of cost for 15.71 metre.
MATERIAL:
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
Total = 2.15 sqm
Natural colour insulating board:12 mm thick
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.71 metre
Cost of 1 metre
Say
12.27.3
12.27.3.1
12 mm thick.
Code
0328
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Details of cost for 15.71 metre.
MATERIAL:
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
Total = 2.15 sqm
White face insulating board:12 mm thick
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.71 metre
Cost of 1 metre
Say
690
Unit
Quantity
Rate
sqm
L.S.
L.S.
2.15
3.38
5.33
270.00
1.70
1.70
580.50
5.75
9.06
day
day
L.S.
L.S.
day
day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
393.00
297.00
1.70
1.70
393.00
297.00
1.70
192.57
115.83
10.39
10.39
982.50
742.50
18.34
2667.83
26.68
2694.51
404.18
3098.69
197.24
197.25
Unit
Quantity
sqm
L.S.
L.S.
2.15
3.38
5.33
360.00
1.70
1.70
774.00
5.75
9.06
day
day
L.S.
L.S.
day
day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
393.00
297.00
1.70
1.70
393.00
297.00
1.70
192.57
115.83
10.39
10.39
982.50
742.50
18.34
2861.33
28.61
2889.94
433.49
3323.43
211.55
211.55
Rate
Amount
Amount
12.27.4
12.27.4.1
12mm thick.
Code
0336
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Unit
12.27.5
12.27.5.1
3 mm thick.
Code
0994
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Details of cost for 15.71 metre.
MATERIAL:
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
Total = 2.15 sqm
Standard quality hard board sheet 3 mm thick
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.71 metre
Cost of 1 metre
Say
691
Quantity
Rate
Amount
sqm
2.15
315.00
677.25
L.S.
L.S.
3.38
5.33
1.70
1.70
5.75
9.06
day
day
L.S.
L.S.
day
day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
393.00
297.00
1.70
1.70
393.00
297.00
1.70
192.57
115.83
10.39
10.39
982.50
742.50
18.34
2764.58
27.65
2792.23
418.83
3211.06
204.40
204.40
Unit
Quantity
sqm
L.S.
L.S.
2.15
2.73
5.33
125.00
1.70
1.70
268.75
4.64
9.06
day
day
L.S.
L.S.
day
day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
393.00
297.00
1.70
1.70
393.00
297.00
1.70
192.57
115.83
10.39
10.39
982.50
742.50
18.34
2354.97
23.55
2378.52
356.78
2735.30
174.11
174.10
Rate
Amount
12.27.5.2
Code
0996
9999
9999
0111
0114
9999
9999
0111
0114
9999
12.28
Code
0111
0112
0114
4.5 mm thick.
Description
Details of cost for 15.71 metre.
MATERIAL:
0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
Total = 2.15 sqm
Standard quality hard board sheet 4.5 mm
thick
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 15.71 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
sqm
2.15
150.00
322.50
L.S.
L.S.
2.86
5.33
1.70
1.70
4.86
9.06
day
day
L.S.
L.S.
day
day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
393.00
297.00
1.70
1.70
393.00
297.00
1.70
192.57
115.83
10.39
10.39
982.50
742.50
18.34
2408.94
24.09
2433.03
364.95
2797.98
178.10
178.10
Extra for providing and fixing ceiling to curved surfaces in narrow widths.
Description
Details of cost for 10 sqm.
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
12.29
Unit
Unit
Quantity
day
day
day
1.00
1.00
2.00
Rate
393.00
361.00
297.00
Amount
393.00
361.00
594.00
1348.00
13.48
1361.48
204.22
1565.70
156.57
156.55
Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or
with design ceiling tiles of BWP type phenol formaldehyde synthetic resin
bonded pressed particle board conforming to IS:3087, finished with a coat of
aluminium primer on both sides & edges, including two coats of synthetic enamel
paint of approved quality on exposed face, fixed to a grid made out of anodised
aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main
runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm
692
centre to centre both ways so as to form a grid of 600 mm square. The frame
work shall be suspended from ceiling by level adjusting hangers of 6 mm dia
M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The
suspenders shall be placed 600 x 1200 mm centre to centre including fixing to
the frame with C.P brass screws and applying a priming coat of zinc chromate
yellow primer (aluminium frame work shall be paid separately).
Code
7267
9999
9999
0111
0114
9999
9999
12.30
Code
7385
7386
Description
Details of cost for 10 sqm.
MATERIAL:
Plain ceiling tiles (BWP type phenol
formaldehyde synthetic resin bonded)
(600x600x12 mm) Qty. including 10%
wastage = 11.00 sqm. i.e. (11/0.36).= 30.56
Nos
Carriage of tiles
C.P.Brass screws
LABOUR:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
each
30.56
120.00
3667.20
L.S.
L.S.
14.82
26.91
1.70
1.70
25.19
45.75
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
393.00
297.00
1.70
1.70
982.50
594.00
52.82
52.82
5420.28
54.20
5474.48
821.17
6295.65
629.57
629.55
693
Unit
Quantity
Rate
Amount
sqm
10.00
570.00
5700.00
sqm
-10.00
260.00
-2600.00
3100.00
31.00
3131.00
469.65
3600.65
360.07
360.05
12.31
12.31.1
Flat surfaces.
Code
1196
2204
1219
1220
0869
2308
9999
0111
0114
0122
0114
0101
9999
9999
Description
Unit
694
Quantity
Rate
Amount
47.52
0.0475
0.75
310.00
121.88
60.00
1473.12
5.79
45.00
10.20
45.00
459.00
219.76
0.22
2.73
4.00
94.80
1.70
.04
20.86
4.64
1.60
1.60
393.00
297.00
628.80
475.20
3.23
3.23
0.54
83.98
53.82
393.00
297.00
328.00
1.70
1.70
1269.39
959.31
177.12
142.77
91.49
6631.53
66.32
6697.85
1004.68
7702.53
770.25
770.25
12.31.2
Code
1196
2204
1219
1220
0869
2308
9999
0111
0114
0122
0114
0101
9999
9999
0111
0122
0114
Curved surfaces.
Description
Unit
695
Quantity
Rate
Amount
10 cudm
cum
kilogram
47.52
0.0475
0.75
310.00
121.88
60.00
1473.12
5.79
45.00
sqm
10.20
45.00
459.00
kilogram
tonne
L.S.
219.76
0.22
2.73
4.00
94.80
1.70
879.04
20.86
4.64
day
day
day
day
day
L.S.
L.S.
day
day
day
1.60
1.60
3.23
3.23
0.54
83.98
53.82
0.50
1.00
1.50
393.00
297.00
393.00
297.00
328.00
1.70
1.70
393.00
393.00
297.00
628.80
475.20
1269.39
959.31
177.12
142.77
91.49
196.50
393.00
445.50
7666.53
76.67
7743.20
1161.48
8904.68
890.47
890.45
12.32
Code
0869
2308
0122
0114
0101
9999
12.33
Code
9999
0122
0114
0101
12.34
Code
Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous)
ceiling.
Description
Unit
Quantity
Rate
Amount
kilogram
tonne
109.88
0.11
4.00
94.80
439.52
10.43
day
day
day
L.S.
2.00
2.00
0.25
13.52
393.00
297.00
328.00
1.70
786.00
594.00
82.00
22.98
1934.93
19.35
1954.28
293.14
2247.42
224.74
224.75
Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 metres
height from floor level.
Description
Details of cost for 10 sqm/metre height.
Scaffolding
LABOUR:
Mason (for plaster of paris work) 1st class
Beldar
Bhisti
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm per metre height
Cost of 1 sqm per metre height
Say
Unit
Quantity
Rate
Amount
L.S.
13.52
1.70
22.98
day
day
day
1.00
1.00
0.25
393.00
297.00
328.00
393.00
297.00
82.00
794.98
7.95
802.93
120.44
923.37
92.34
92.35
Providing and fixing thermal insulation of ceiling (under deck insulation) with
Resin Bonded Fibre glass wool conforming to IS : 8183, density 24 kg/m3, 50 mm
thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats
(50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire and mesh, for
top most ceiling of building.
Description
Unit
696
Quantity
Rate
Amount
Code
7232
9999
9999
0111
0114
12.35
Code
7231
9999
0111
0114
Description
Unit
Quantity
Rate
Amount
sqm
11.00
204.00
2244.00
L.S.
104.00
1.70
176.80
L.S.
351.00
1.70
596.70
day
day
1.00
2.00
393.00
297.00
393.00
594.00
4004.50
40.04
4044.54
606.68
4651.22
465.12
465.10
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
conforming to IS: 8183, density 16 kg/m3 , 50 mm thick, wrapped in 200 G Virgin
Polythene bags placed over existing false ceiling and held in position by crisscrossing GI wire.
Description
Details of cost for 10 sqm.
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add 10% for overlappings & wastage =
1.00sqm. Total = 11.00sqm
Resin Bonded Glass wool 16 kg/ m3: 50 mm
thick
Sundries including GI wire 20 SWG and
polythene bags 200gms
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
145.00
1595.00
L.S.
52.00
1.70
88.40
day
day
0.50
0.50
393.00
297.00
196.50
148.50
2028.40
20.28
2048.68
307.30
2355.98
235.60
235.60
12.36
12.36.1
Code
Description
Unit
697
Quantity
Rate
Amount
Code
7090
0314
9999
0111
0114
12.36.2
Code
7091
0314
9999
0111
0114
Description
Unit
Total = 11.00sqm
Expanded polystyrene type N- Normal
Bitumen hot sealing compound : grade A
Sundries
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Quantity
Rate
Amount
sqm
kilogram
L.S.
11.00
0.25
13.00
130.00
26.00
1.70
1430.00
6.50
22.10
day
day
0.50
0.50
393.00
297.00
196.50
148.50
1803.60
18.04
1821.64
273.25
2094.89
209.49
209.50
Unit
Quantity
Rate
Amount
sqm
kilogram
L.S.
11.00
0.25
13.00
155.00
26.00
1.70
1705.00
6.50
22.10
day
day
0.50
0.50
393.00
297.00
196.50
148.50
2078.60
20.79
2099.39
314.91
2414.30
241.43
241.45
12.37
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement
mortar 1:4 (1 cement : 4 fine sand).
12.37.1
Code
3004
9999
9999
0124
0114
Description
Unit
Quantity
each
L.S.
L.S.
10.00
13.52
13.52
35.00
1.70
1.70
350.00
22.98
22.98
day
day
0.40
0.40
361.00
297.00
144.40
118.80
698
Rate
Amount
Code
9999
Description
Unit
Sundries
L.S.
Quantity
5.33
Rate
1.70
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 nos
Cost of each
Say
Amount
9.06
668.22
6.68
674.90
101.24
776.14
77.61
77.60
12.38
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I.
rain water pipes embedded in and including cement concrete blocks 10x10x10
cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) and cost of cutting holes and making good the walls etc.
12.38.1
100 mm diameter.
Code
1331
9999
9999
0116
0124
0114
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
9999
Description
Unit
699
Quantity
Rate
Amount
5.00
20.00
100.00
7.15
2.47
1.70
1.70
12.16
4.20
0.125
0.75
0.5 20
0.0033
393.00
361.00
97.00
1200.00
49.12
270.75
148.50
3.96
0.0011
1050.00
1.16
0.0044
106.64
0.47
0.0022
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13
0.13
1120.00
106.64
5240.00
94.80
297.00
297.00
328.00
393.00
361.00
328.00
1.70
1.70
1.70
2.46
0.23
8.38
0.15
1.34
0.95
0.46
0.12
0.11
0.07
0.44
0.22
0.22
605.47
6.05
611.52
91.73
703.25
140.65
140.65
12.38.2
Code
0886
9999
9999
0116
0124
0114
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
9999
150 mm diameter.
Description
Details of cost for 5 nos.
MATERIAL:
Standard holder bat clamps for sand cast iron
or cast iron pipes 150 mm dia
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
Carriage of bat clamps
Sundries
LABOUR:
Fitter (grade 1)
Mason (brick layer) 2nd class
Beldar
Stone Aggregate (Single size) : 20 mm
nominal size
Stone Aggregate (Single size) : 10 mm
nominal size
Carriage of stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of coarse sand
Portland Cement
Carriage of cement
Beldar
Coolie
Bhisti
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Mate
Hire charges of machine etc.
Sundries
Sundries
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5 nos
Cost of each
Say
Unit
Quantity
Rate
Amount
each
5.00
25.00
125.00
L.S.
L.S.
2.47
7.15
1.70
1.70
4.20
12.16
day
day
day
cum
0.125
0.75
0.50
0.0033
393.00
361.00
297.00
1200.00
49.12
270.75
148.50
3.96
cum
0.0011
1050.00
1.16
cum
0.0044
106.64
0.47
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
L.S.
0.0022
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13
0.13
1120.00
106.64
5240.00
94.80
297.00
297.00
328.00
393.00
361.00
328.00
1.70
1.70
1.70
2.46
0.23
8.38
0.15
1.34
0.95
0.46
0.12
0.11
0.07
0.44
0.22
0.22
630.47
6.30
636.77
95.52
732.29
146.46
146.45
12.39
Providing lead caulked joints to sand cast iron rain water pipes and fittings.
12.39.1
Code
0865
1001
9999
9999
0116
Description
Unit
700
Quantity
Rate
Amount
kilogram
kilogram
L.S.
L.S.
0.98
0.11
13.52
1.43
125.00
40.00
1.70
1.70
122.50
4.40
22.98
2.43
day
0.06
393.00
23.58
Code
0117
0114
Description
Assistant Fitter or 2nd class Fitter
Beldar
Unit
Quantity
day
day
0.06
0.12
Unit
Quantity
Rate
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.39.2
Code
0865
1001
9999
9999
0116
0117
0114
Amount
21.66
35.64
233.19
2.33
235.52
35.33
270.85
270.85
Rate
Amount
kilogram
kilogram
L.S.
L.S.
1.48
0.17
13.52
2.73
125.00
40.00
1.70
1.70
185.00
6.80
22.98
4.64
day
day
day
0.08
0.08
0.15
393.00
361.00
297.00
31.44
28.88
44.55
324.29
3.24
327.53
49.13
376.66
376.65
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.40
Providing, fixing and embedding sand cast iron accessories for rain water pipes
in the masonry surrounded with 12 mm thick cement mortar of the same mix, as
that of masonry (lead caulking will be paid for separately).
12.40.1
12.40.1.1
150 mm diameter.
Code
0966
9999
Description
Details of cost for 1 shoe.
Sand Cast iron plain shoe 150 mm dia
Carriage, fixing and mortar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
701
Unit
Quantity
each
L.S.
1.00
17.55
Rate
325.00
1.70
Amount
325.00
29.84
354.84
3.55
358.39
53.76
412.15
412.15
12.41
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
12.41.1
75 mm diameter.
Code
7188
7190
9999
9999
0116
0114
0100
9999
12.41.2
Code
7189
7191
9999
9999
0116
0114
0100
9999
Description
Unit
Quantity
Rate
Amount
metre
6.00
67.00
402.00
each
1.00
16.00
16.00
L.S.
L.S.
13.52
6.76
1.70
1.70
22.98
11.49
day
day
day
L.S.
0.19
0.37
0.08
18.59
393.00
297.00
328.00
1.70
74.67
109.89
26.24
31.60
694.87
6.95
701.82
105.27
807.09
134.52
134.50
Unit
Quantity
110 mm diameter.
Description
Details of cost for 6 metre.
uPVC pipes (working pressure 4 kg / cm 2 )
Single socketed pipe 110 mm dia
uPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Carriage of material
Adhesive, and sundries etc.
LABOUR:
Fitter (grade 1)
Beldar
Bandhani
Scaffolding
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 6 metre
Cost of 1 metre
Say
702
Rate
Amount
metre
6.00
129.00
774.00
each
1.00
20.00
20.00
L.S.
L.S.
17.55
8.06
1.70
1.70
29.84
13.70
day
day
day
L.S.
0.23
0.45
0.11
18.59
393.00
297.00
328.00
1.70
90.39
133.65
36.08
31.60
1129.26
11.29
1140.55
171.08
1311.63
218.61
218.60
12.42
12.42.1
Coupler.
12.42.1.1
75 mm.
Code
7192
7190
9999
9999
12.42.1.2
Code
7193
7191
9999
9999
Description
Details of cost for 1 coupler.
UPVC coupler for UPVC drainage pipes
75 mm
uPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adhesive, and sundries etc.
LABOUR:
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Description
Details of cost for 1 coupler.
UPVC coupler for UPVC drainage pipes 110 mm
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Adhesive, and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.42.2.1
75 mm.
7194
7190
9999
9999
Quantity
Rate
Amount
each
1.00
34.00
34.00
each
2.00
16.00
32.00
L.S.
2.73
1.70
4.64
L.S.
9.36
1.70
15.91
86.55
0.87
87.42
13.11
100.53
100.55
Unit
Quantity
each
each
1.00
2.00
52.00
20.00
52.00
40.00
L.S.
L.S.
2.73
10.79
1.70
1.70
4.64
18.34
114.98
1.15
116.13
17.42
133.55
133.55
Unit
Quantity
each
each
1.00
2.00
50.00
16.00
50.00
32.00
L.S.
L.S.
2.73
9.36
1.70
1.70
4.64
15.91
110 mm.
12.42.2
Code
Unit
Description
Details of cost for 1 coupler.
UPVC pushfit coupler (single) 75 mm thick
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adhesive, and sundries etc.
Carriage and fixing charges.
703
Rate
Rate
Amount
Amount
Code
Description
Unit
Quantity
Rate
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.42.2.2
Code
7195
7191
9999
9999
Description
Details of cost for 1 coupler.
UPVC pushfit coupler (single) 110 mm thick
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Adhesive, and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.42.3.1
75x75x75 mm.
7198
7190
9999
12.42.3.2
Code
7199
7191
102.55
1.03
103.58
15.54
119.12
119.10
110 mm.
12.42.3
Code
Amount
Description
Details of cost for 1 tee.
UPVC single equal Tee (with door) 75x75x75 mm
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adhesive, Carriage of material rubber washer
etc. including fixing charges
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Unit
Quantity
Rate
each
each
1.00
2.00
81.00
20.00
81.00
40.00
L.S.
L.S.
2.73
10.79
1.70
1.70
4.64
18.34
143.98
1.44
145.42
21.81
167.23
167.25
Unit
Quantity
each
each
1.00
3.00
115.00
16.00
115.00
48.00
L.S.
10.76
1.70
18.29
Rate
Amount
Amount
181.29
1.81
183.10
27.46
210.56
210.55
110x110x110 mm.
Description
Details of cost for 1 tee.
MATERIAL:
UPVC single equal Tee (with door) 110x110
x110 mm
uPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
704
Unit
Quantity
Rate
Amount
each
1.00
180.00
180.00
each
3.00
20.00
60.00
Code
9999
Description
Adhesive, Carriage of material rubber washer
etc. including fixing charges
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
12.42.4
12.42.4.1
75x75x75 mm.
Code
7196
7190
9999
12.42.4.2
Code
7197
7191
9999
Unit
Description
Details of cost for 1 tee.
MATERIAL:
UPVC single equal Tee (without door) 75x
75x75 mm
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adhesive, Carriage of material rubber washer
etc. including fixing charges
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
L.S.
Quantity
13.47
Rate
1.70
Amount
22.90
262.90
2.63
265.53
39.83
305.36
305.35
Unit
Quantity
Rate
Amount
each
1.00
95.00
95.00
each
3.00
16.00
48.00
L.S.
10.76
1.70
18.29
161.29
1.61
162.90
24.44
187.34
187.35
110x110x110 mm.
Description
Details of cost for 1 tee.
MATERIAL:
UPVC single equal Tee (without door)
110x110x110 mm
uPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Adhesive, Carriage of material rubber washer
etc. including fixing charges
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
705
Unit
Quantity
Rate
Amount
each
1.00
128.00
128.00
each
3.00
20.00
60.00
L.S.
13.47
1.70
22.90
210.90
2.11
213.01
31.95
244.96
244.95
12.42.5
Bend 87.5.
12.42.5.1
75 mm bend.
Code
7208
7190
9999
9999
12.42.5.2
Code
7209
7191
9999
9999
Description
Details of cost for 1 coupler.
UPVC bend 87.5 75 mm bend
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adesive and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Description
Details of cost for 1 bend.
UPVC bend 87.5 110 mm bend
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Adhesive, and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Shoe (Plain).
12.42.6.1
75 mm Shoe.
7212
7190
9999
9999
Quantity
Rate
Amount
each
each
1.00
1.00
56.00
16.00
56.00
16.00
L.S.
L.S.
2.73
9.36
1.70
1.70
4.64
15.91
92.55
0.93
93.48
14.02
107.50
107.50
Unit
Quantity
each
each
1.00
1.00
95.00
20.00
95.00
20.00
L.S.
L.S.
2.73
10.79
1.70
1.70
4.64
18.34
137.98
1.38
139.36
20.90
160.26
160.25
Unit
Quantity
each
each
1.00
1.00
107.00
16.00
107.00
16.00
L.S.
L.S.
2.73
9.36
1.70
1.70
4.64
15.91
143.55
1.44
144.99
21.75
166.74
166.75
110 mm bend.
12.42.6
Code
Unit
Description
Details of cost for 1 shoe.
UPVC plain shoe 75 mm bend
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 75 mm dia
Adhesive, and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
706
Rate
Rate
Amount
Amount
12.42.6.2
Code
7213
7191
9999
9999
110 mm Shoe.
Description
Details of cost for 1 shoe.
UPVC plain shoe 110 mm bend
UPVC pipes (working pressure 4 kg / cm 2 )
Rubber (Seal) Ring 110 mm dia
Adhesive and sundries etc.
Carriage and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
207.00
20.00
207.00
20.00
L.S.
L.S.
2.73
10.79
1.70
1.70
4.64
18.34
249.98
2.50
252.48
37.87
290.35
290.35
12.43
12.43.1
75 mm.
Code
7214
9999
0870
0116
0124
0114
9999
9999
9999
12.43.2
Code
7215
9999
Description
Details of cost for 5 nos.
MATERIAL:
UPVC pipe clip 75 mm bend
Carriage of U-PVC pipe clips
Plug
LABOUR:
Fitter (grade 1)
Mason (brick layer) 2nd class
Beldar
Sundries
Sundries
Sundries cement mortar 1:4 (1 Cement: 4
Coarse sand)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5 nos
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
each
5.00
2.47
10.00
16.00
1.70
10.00
80.00
4.20
100.00
day
day
day
L.S.
L.S.
L.S.
0.125
0.75
0.50
7.15
0.91
3.90
393.00
361.00
297.00
1.70
1.70
1.70
49.12
270.75
148.50
12.16
1.55
6.63
672.91
6.73
679.64
101.95
781.59
156.32
156.30
110 mm.
Description
Unit
Quantity
each
L.S.
5.00
2.47
707
Rate
31.00
1.70
Amount
155.00
4.20
Code
0870
0116
0124
0114
9999
9999
9999
12.44
Code
7187
9999
12.45
Description
Unit
Quantity
Rate
Amount
Plug
LABOUR:
Fitter (grade 1)
Mason (brick layer) 2nd class
Beldar
Sundries
Sundries
Sundries cement mortar 1:4 (1 Cement: 4
Coarse sand)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 5 nos
Cost of each
Say
each
10.00
10.00
100.00
day
day
day
L.S.
L.S.
L.S.
0.125
0.75
0.50
7.15
0.91
3.90
393.00
361.00
297.00
1.70
1.70
1.70
49.12
270.75
148.50
12.16
1.55
6.63
747.91
7.48
755.39
113.31
868.70
173.74
173.75
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm
diameter and weighing not less than 440 grams.
Description
Details of cost for 1 grating.
C.I. grating 150 mm dia, weighing not less
than 440 gm
Carriage of material and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
25.00
25.00
L.S.
4.16
1.70
7.07
32.07
0.32
32.39
4.86
37.25
37.25
Providing and fixing false ceiling at all height including providing and fixing of
frame work made of special sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277
and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of
27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling
with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of
cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &
bolts of required size and other end of angle hanger fixed with intermediate G.I.
channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to
which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in
a direction perpendicular to G.I. intermediate channel with connecting clips made
out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing
perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm
long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at
450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including
fixing of gypsum board to ceiling section and perimeter channel with the help of
708
dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing
to a flush finish of tapered and square edges of the board with recommended
jointing compound , jointing tapes , finishing with jointing compound in 3 layers
covering upto 150 mm on both sides of joint and two coats of primer suitable for
board, all as per manufacturers specification and also including the cost of making
openings for light fittings, grills, diffusers, cutouts made with frame of perimeter
channels suitably fixed, all complete as per drawings, specification and direction
of the Engineer in Charge but excluding the cost of painting with.
12.45.1
Code
7009
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I.
Description
Unit
709
Quantity
Rate
Amount
108.86
200.00
21772.00
238.14
39.00
9287.46
41.84
27.00
1129.68
90.72
42.00
3810.24
10.80
19.00
205.20
189.00
6.20
1171.80
216.00
25.00
540.00
72.00
4.00
288.00
1000.00
22.81
34.21
1.27
18.66
72.00
60.00
22.00
24.00
145.00
85.00
50.00
600.00
501.82
821.04
184.15
1586.10
3600.00
807.30
447.20
1.70
1.70
1372.41
760.24
31.104
31.104
10.368
361.00
297.00
361.00
11228.54
9237.89
3742.85
71839.42
718.39
72557.81
10883.67
83441.48
804.80
804.80
12.45.2
Code
7030
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131
12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095Part I.
Description
Unit
710
Quantity
Rate
Amount
108.86
237.00
25799.82
238.14
39.00
9287.46
41.84
27.00
1129.68
90.72
42.00
3810.24
10.80
19.00
205.20
189.00
6.20
1171.80
216.00
25.00
540.00
72.00
4.00
288.00
1000.00
22.81
34.21
1.27
18.66
72.00
60.00
22.00
24.00
145.00
85.00
50.00
600.00
501.82
821.04
184.15
1586.10
3600.00
807.30
447.20
1.70
1.70
1372.41
760.24
31.104
31.104
10.37
361.00
297.00
361.00
11228.54
9237.89
3743.57
75867.96
758.68
76626.64
11494.00
88120.64
849.93
849.95
12.45.3
Code
7031
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131
12.45.4
Code
Unit
Quantity
Rate
Amount
108.86
271.00
29501.06
238.14
39.00
9287.46
41.84
27.00
1129.68
90.72
42.00
3810.24
10.80
19.00
205.20
189.00
6.20
1171.80
216.00
25.00
540.00
72.00
4.00
288.00
1000.00
22.81
34.21
1.27
18.66
72.00
60.00
22.00 5
24.00
145.00
85.00
50.00
600.00
01.82
821.04
184.15
1586.10
3600.00
807.30
447.20
1.70
1.70
1372.41
760.24
31.104
31.104
10.368
361.00
297.00
361.00
11228.54
9237.89
3742.85
79568.48
795.68
80364.16
12054.62
92418.78
891.38
891.40
Unit
711
Quantity
Rate
Amount
Code
7028
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131
12.46
Code
7857
9999
Description
Unit
Quantity
Rate
Amount
sqm
metre
108.86
238.14
927.00
39.00
100913.22
9287.46
metre
41.84
27.00
1129.68
metre
90.72
42.00
3810.24
metre
10.80
19.00
205.20
each
189.00
6.20
1171.80
10 Nos
216.00
25.00
540.00
each
72.00
4.00
288.00
100 Nos
kilogram
kilogram
roll
litre
each
1000.00
22.81
34.21
1.27
18.66
72.00
60.00
22.00
24.00
145.00
85.00
50.00
600.00
501.82
821.04
184.15
1586.10
3600.00
L.S.
L.S.
807.30
447.20
1.70
1.70
1372.41
760.24
day
day
day
31.104
31.104
10.368
361.00
297.00
361.00
11228.54
9237.89
3742.85
150980.64
1509.81
152490.45
22873.57
175364.02
1691.40
1691.40
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering
Thermoplastic) grating square (Slit) 150 mm square with a height of 8mm and
weighing not less than 100 gms.
Description
Details of cost for 1 grating.
MATERIAL:
P.T.M.T. Grating square slit 150 mm
Carriage of material and fixing charges.
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of each
Say
712
Unit
Quantity
each
L.S.
1.00
4.16
Rate
77.00
1.70
Amount
77.00
7.07
84.07
0.84
84.91
12.74
97.65
97.65
12.47
Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing up
to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts
8 mm dia G.I plain/bitumen washers complete but excluding the cost of purlins,
rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel
rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under
approxirnately 2400 psi and hot cured. They shall be of uniform pigmentation
and thickness without air pockets and shall conform to IS 10192 and IS 12866.The
sheets shall be opaque or translucent, clear or pigmented, textured or smooth
as specified.
12.47.1
Code
8668
9999
1022
1023
1207
1208
9999
9999
0130
0112
0114
Description
Details of cost for area of roof 2x18.09x5.1 =
184.518 sqm.
MATERIAL:
UV stabilised 2 mm thick corrugated FRP
sheet
Carriage of sheet
G.I.Seam bolts and nuts 60cm centre to centre
zig-zag i.e. 30cm centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 Nos.
2x26(laps)xl7 Nos. = 884 Nos
Galvanised steel bolts & nuts 6 mm dia
and 25 mm long round head with slots
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)
2x5x27
(No. of sheets)x23 Nos. of bolts in each
sheet = 810 Nos
Galvanised steel J or L hooks 8 mm dia
G.I. Limpet washer
(total of seam and J bolts)
884+810= 1694
Bitumen washer
Carriage of bolts and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 184.518 sqm
Cost of 1 sqm
Say
713
Unit
Quantity
sqm
240.408
538.00
129339.50
L.S.
104.00
1.70
176.80
10 Nos
884.00
25.00
2210.00
10 Nos
100 nos
810.00
1694.00
110.00
35.00
8910.00
592.90
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
30.00
1.70
1.70
508.20
45.75
91.49
1.30
15.50
15.50
393.00
361.00
297.00
510.90
5595.50
4603.50
152584.54
1525.85
154110.39
23116.56
177226.95
960.49
960.50
day
day
day
Rate
Amount
12.47.2
Code
8667
9999
1022
1023
1207
1208
9999
9999
0130
0112
0114
12.48
Code
8670
2207
0123
0114
9999
2 mm thick flat.
Description
Details of cost for area of roof 2x18.09x5.1 =
184.518 sqm.
MATERIAL:
UV stabilised 2 mm thick plain FRP sheet
Carriage of sheet
G.I.Seam bolts and nuts 60cm centre to centre
zig-zag i.e. 30cm centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 Nos.
2x26(laps)xl7 Nos. = 884 Nos
Galvanised steel bolts & nuts 6 mm dia
and 25 mm long round head with slots
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)
2x5x27
(No. of sheets)x23 Nos. of bolts in each
sheet = 810 Nos
Galvanised steel J or L hooks 8 mm dia
G.I. Limpet washer
(total of seam and J bolts)
884+810= 1694
Bitumen washer
Carriage of bolts and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 184.518 sqm
Cost of 1 sqm
Say
Unit
Quantity
sqm
L.S.
240.408
104.00
465.00
1.70
111789.72
176.80
10 Nos
884.00
25.00
2210.00
10 Nos
100 nos
810.00
1694.00
110.00
35.00
8910.00
592.90
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
30.00
1.70
1.70
508.20
45.75
91.49
1.30
15.50
15.50
393.00
361.00
297.00
510.90
5595.50
4603.50
135034.76
1350.35
136385.11
20457.77
156842.88
850.01
850.00
day
day
day
Rate
Amount
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal
thickness and of approved size and as per approved pattern on steel frame
work complete (steel frame work to be paid separately).
Description
Unit
714
Quantity
Rate
Amount
each
1000 Nos
160.00
160.00
10.50
170.63
1680.00
27.30
day
day
L.S.
0.30
1.56
13.00
393.00
297.00
1.70
117.90
463.32
22.10
2310.62
23.11
2333.73
350.06
2683.79
268.38
268.40
12.49
Code
8669
2207
0123
0114
9999
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm
thickness and of approved pattern on steel frame work complete (steel frame
work to be paid separately).
Description
Unit
Quantity
Rate
each
1000 Nos
12.00
12.00
29.00
170.63
348.00
2.05
day
day
L.S.
0.01
0.15
2.60
393.00
297.00
1.70
3.93
44.55
4.42
402.95
4.03
406.98
61.05
468.03
130.01
130.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 3.6 sqm
Cost of 1 sqm
Say
12.50
Code
8671
9999
1023
1208
1209
9999
9999
Amount
Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %),
total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be
supplied in single length upto 12 metre or as desired by Engineer-in-charge.
The sheet shall be fixed using self drilling /self tapping screws of size (5.5x
55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters and trusses and including cutting
to size and shape wherever required.
Description
Details of cost for 216.14 sqm.
Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof20.2x10.70m = 216.14 sqm.
MATERIAL:
Sheets used = 20 Nosx10.70mx1.06m =
226.84sqm
Add 3% wastage = 6.81
Total = 233.65sqm
Precoated galvanised iron profile sheet
0.50 mm TCT
Carriage of sheets
Galvanised steel J or L hooks 8 mm dia
Bitumen washer
G.I. plain washer thick
Carriage of bolts and nuts, washers etc.
Sundries
715
Unit
Quantity
Rate
Amount
sqm
233.65
435.00
101637.75
L.S.
10 Nos
100 Nos
100 Nos
L.S.
L.S.
104.00
476.00
476.00
476.00
8.06
39.52
1.70
110.00
30.00
35.00
1.70
1.70
176.80
5236.00
142.80
166.60
13.70
67.18
Code
0130
0112
0114
Description
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Unit
Quantity
day
day
day
2.34
9.34
9.34
Rate
393.00
361.00
297.00
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 216.14 sqm
Cost of 1 sqm
Say
Amount
919.62
3371.74
2773.98
114506.17
1145.06
115651.23
17347.68
132998.91
615.34
615.35
12.51
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50
mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:
277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns using self drilling/ self tapping screws
complete.
12.51.1
Code
8672
9999
9999
0130
0112
0114
12.51.2
Code
8673
Description
Unit
Quantity
Rate
Amount
metre
L.S.
23.11
13.52
440.00
1.70
10168.40
22.98
L.S.
6.76
1.70
11.49
day
day
day
0.14
0.55
1.64
393.00
361.00
297.00
55.02
198.55
487.08
10943.52
109.44
11052.96
1657.94
12710.90
629.25
629.25
Unit
Quantity
716
metre
23.11
Rate
440.00
Amount
10168.40
Code
9999
9999
0130
0112
0114
12.51.3
Code
8675
1023
1209
1208
9999
9999
0130
0112
0114
12.51.4
Code
8676
0222
1211
Description
Unit
Quantity
Rate
Amount
L.S.
3.25
1.70
5.52
L.S.
3.25
1.70
5.52
day
day
day
0.07
0.28
0.82
393.00
361.00
297.00
27.51
101.08
243.54
10551.57
105.52
10657.09
1598.56
12255.65
606.72
606.70
Unit
Quantity
Rate
Amount
23.11
455.00
10515.05
40.00
40.00
40.00
9.88
6.24
110.00
35.00
30.00
1.70
1.70
440.00
14.00
12.00
16.80
10.61
0.10
0.30
1.00
393.00
361.00
297.00
39.30
108.30
297.00
11453.06
114.53
11567.59
1735.14
13302.73
658.55
658.55
Unit
717
Quantity
Rate
Amount
metre
10 Nos
8.64
5.00
445.00
40.00
3844.80
20.00
100 Nos
10.00
30.00
3.00
Code
1208
9999
9999
0130
0112
0114
Description
Unit
Bitumen washer
Carriage of barge boards, bolts, nus
and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Quantity
Rate
100 Nos
L.S.
5.00
9.36
30.00
1.70
1.50
15.91
L.S.
6.76
1.70
11.49
day
day
day
0.04
0.06
0.40
393.00
361.00
297.00
15.72
21.66
118.80
4052.88
40.53
4093.41
614.01
4707.42
571.98
572.00
Unit
Quantity
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 8.23 metre
Cost of 1 metre
Say
12.51.5
Code
8677
1023
1209
1208
9999
9999
0130
0112
0114
12.51.6
Code
8674
9999
Amount
Crimp curve.
Description
Details of cost for crimp curve 20.2 metres
long Area 20.20 x 1.06 =21.412 sqm.
MATERIAL:
Precoated galvanised steel crimp curve
Galvanised steel J or L hooks 8 mm dia
G.I. plain washer thick
Bitumen washer
Carriage of hooks, nuts, washers and curves.
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 21.412 sqm
Cost of 1 sqm
Say
sqm
10 Nos
100 Nos
100 Nos
L.S.
L.S.
Rate
Amount
22.483
40.00
40.00
40.00
9.88
6.24
475.00
110.00
35.00
30.00
1.70
1.70
10679.42
440.00
14.00
12.00
16.80
10.61
day
day
day
0.10
0.30
1.00
393.00
361.00
297.00
39.30
108.30
297.00
11617.43
116.17
11733.60
1760.04
13493.64
630.19
630.20
Description
Unit
Quantity
metre
L.S.
718
10.00
1.04
Rate
455.00
1.70
Amount
4550.00
1.77
Code
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114
12.52
Description
Unit
Quantity
Rate
Amount
Flats up to 10 mm in thickness
Galvanised steel bolts & nuts 6 mm dia
and 25 mm long round head with slots
Galvanised steel bolts & nuts 10 mm dia
and 125 mm long round head with slots
G.I. plain washer thin
Bitumen washer
Carriage of G.I. seam bolts and
Sundries
LABOUR:
Blacksmith 1 st class
Beldar
Sundries
Mistry
Blacksmith 1 st class
Carpenter 2nd class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 metre
Cost of 1 metre
Say
quintal
10 Nos
0.0749
20.00
4200.00
25.00
314.58
50.00
each
30.00
12.00
360.00
100 Nos
100 Nos
L.S.
L.S.
70.00
40.00
2.73
5.33
32.00
30.00
1.70
1.70
22.40
12.00
4.64
9.06
day
day
L.S.
day
day
day
day
0.50
0.50
12.61
0.28
0.84
0.62
1.68
393.00
297.00
1.70
393.00
393.00
361.00
297.00
196.50
148.50
21.44
110.04
330.12
223.82
498.96
6853.83
68.54
6922.37
1038.36
7960.73
796.07
796.05
Providing and fixing tiled false ceiling of approved materials of size 595x595
mm in true horizontal level, suspended on inter locking metal grid of hot dipped
galvanized steel sections ( galvanized @ 120 grams per sqm, both side
inclusive) consisting of main "T" runner with suitably spaced joints to get
required length and of size 24x38 mm made from 0.30 mm thick (minimum)
sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm
made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and secondary
cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to
form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying
false ceiling tiles of approved texture in the grid including, required cutting/
making, opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main "T" runners to be suspended from ceiling using GI slotted
cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level
clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main
T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with
polyester paint, all complete for all heights as per specifications, drawings
and as directed by Engineer-in-charge.
719
12.52.1
Code
8599
8611
8612
8613
8614
8615
8616
8617
7388
9999
9999
0111
0114
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size
595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having
galvanizing of 100 gms/sqm (both sides inclusive) and electro statically
polyester powder coated of thickness 60 microns (minimum), including factory
painted after bending
Description
Details of cost for 100 sqm.
MATERIAL:
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105.00 sqm
MATERIAL:
GI Metal Tile Lay-in Plain Tegular edge global
white color tiles of Size 595x595 mm and
0.5 mm thick
Main T ceiling sections 24x38x0.3 mm
(3 metre long)
Including Wastage @ 10%
Perimeter wall angle 24 x 24 x 0.3 mm
(3 metre long)
Including Wastage @ 10%
Intermediate cross T-Section 24x25x
0.3 mm (1.2 m long)
Including Wastage @ 10% on grid for
cut outs
Intermediate cross T-Section 24x25x
0.3 mm (0.6 m long)
Including Wastage @ 10% on grid for cut outs
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Sundries i.e scaffolding etc.
Carriage of materials etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Cost of 1 sqm
Say
720
Unit
Quantity
Rate
Amount
sqm
105.00
809.00
84945.00
each
29.50
187.00
5516.50
each
13.50
118.00
1593.00
each
147.00
72.00
10584.00
each
147.00
34.00
4998.00
each
each
each
each
72.00
72.00
72.00
72.00
8.00
6.00
3.00
50.00
576.00
432.00
216.00
3600.00
L.S.
L.S.
187.95
89.28
1.70
1.70
319.52
151.78
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
130766.80
1307.67
132074.47
19811.17
151885.64
1518.86
1518.85
12.52.2
Code
8600
8611
8612
8613
8614
8615
8616
8617
7388
9999
9999
0111
0114
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size
595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having
galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area
with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5,
electro statically polyester powder coated of thickness 60 microns (minimum),
including factory painted after bending and perforation, and backed with a black
Glass fiber acoustical fleece.
Description
Details of cost for 100 sqm.
MATERIAL:
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105.00 sqm
MATERIAL:
GI Metal Tile Lay-in Perforated Tegular edge
global white color tiles of Size 595x595 mm
and 0.5 mm thick
Main T ceiling sections 24x38x0.3 mm
(3 metre long)
Including Wastage @ 10%
Perimeter wall angle 24 x 24 x 0.3 mm
(3 metre long)
Including Wastage @ 10%
Intermediate cross T-Section 24x25x0.3 mm
(1.2 m long)
Including Wastage @ 10% on grid for cut outs
Intermediate cross T-Section 24x25x
0.3 mm (0.6 m long)
Including Wastage @ 10% on grid for cut outs
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Sundries i.e scaffolding etc.
Carriage of materials etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Cost of 1 sqm
Say
721
Unit
Quantity
Rate
Amount
sqm
105.00
906.00
95130.00
each
29.50
187.00
5516.50
each
13.50
118.00
1593.00
each
147.00
72.00
10584.00
each
147.00
34.00
4998.00
each
each
each
each
72.00
72.00
72.00
72.00
8.00
6.00
3.00
50.00
576.00
432.00
216.00
3600.00
L.S.
L.S.
187.95
89.28
1.70
1.70
319.52
151.78
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
140951.80
1409.52
142361.32
21354.20
163715.52
1637.16
1637.15
12.52.3
Code
8601
8611
8612
8613
8614
8615
8616
8617
7388
9999
9999
0111
0114
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm,
made of Gypsum plasterboard, manufactured from natural gypsum as per IS
2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on
the face side and 12 micron metalized polyester on the back side with all edges
sealed with the face side PVC film which goes around and wraps the edges and
is bonded to the edges and the back side metalized polyester film so as to make
the tile a completely sealed unit.
Description
Details of cost for 100 sqm.
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105.00 sqm
MATERIAL:
PVC Laminated Gypsum Tiles (Square edge)
of Size 595x595 mm and 12.5 mm thick
Main T ceiling sections 24x38x0.3 mm
(3 metre long)
Including Wastage @ 10%
Perimeter wall angle 24 x 24 x 0.3 mm
(3 metre long)
Including Wastage @ 10%
Intermediate cross T-Section 24x25x0.3 mm
(1.2 m long)
Including Wastage @ 10% on grid for
cut outs
Intermediate cross T-Section 24x25x
0.3 mm (0.6 m long)
Including Wastage @ 10% on grid for
cut outs
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Sundries i.e scaffolding etc.
Carriage of materials etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Cost of 1 sqm
Say
722
Unit
Quantity
Rate
Amount
sqm
105.00
468.00
49140.00
each
29.50
187.00
5516.50
each
13.50
118.00
1593.00
each
147.00
72.00
10584.00
each
147.00
34.00
4998.00
each
each
each
each
72.00
72.00
72.00
72.00
8.00
6.00
3.00
50.00
576.00
432.00
216.00
3600.00
L.S.
L.S.
187.95
89.28
1.70
1.70
319.52
151.78
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
94961.80
949.62
95911.42
14386.71
110298.13
1102.98
1103.00
12.52.4
Code
8602
8611
8612
8613
8614
8615
8616
8617
7388
9999
9999
0111
0114
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having
glass fibre conforming to IS: 2095 part I , of size 595x595 mm, having perforation
of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders
of 30 mm, backed with non woven tissue on the back side, having an NRC (
Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool
backing.
Description
Details of cost for 100 sqm.
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105.00 sqm
MATERIAL:
Gypsum Tiles Fully Perforated Square edge
of Size 595x595 mm and 12.5 mm thick
Main T ceiling sections 24x38x0.3 mm
(3 metre long)
Including Wastage @ 10%
Perimeter wall angle 24 x 24 x 0.3 mm
(3 metre long)
Including Wastage @ 10%
Intermediate cross T-Section 24x25x
0.3 mm (1.2 m long)
Including Wastage @ 10% on grid for
cut outs
Intermediate cross T-Section 24x25x
0.3 mm (0.6 m long)
Including Wastage @ 10% on grid for
cut outs
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Sundries i.e scaffolding etc.
Carriage of materials etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Cost of 1 sqm
Say
723
Unit
Quantity
Rate
Amount
sqm
105.00
484.00
50820.00
each
29.50
187.00
5516.50
each
13.50
118.00
1593.00
each
147.00
72.00
10584.00
each
147.00
34.00
4998.00
each
each
each
each
72.00
72.00
72.00
72.00
8.00
6.00
3.00
50.00
576.00
432.00
216.00
3600.00
L.S.
L.S.
187.95
89.28
1.70
1.70
319.52
151.78
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
96641.80
966.42
97608.22
14641.23
112249.45
1122.49
1122.50
12.53
Providing and Fixing 15 mm thick densified tegular edged eco friendly light
weight calcium silicate false ceiling tiles of approved texture spintone/cosmos
/ Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on
inter locking metal grid of hot dipped galvanised steel sections (galvanising @
120 grams per sqm including both side) consisting of main 'T' runner suitably
spaced at joints to get required length and of size 24x38 mm made from 0.33
mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of
size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced
between main'T' at 600 mm centre to centre to form a grid of 1200x600 mm and
secondary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm
thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to
from grid of size 600x600 mm, resting on periphery walls /partitions on a
Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm
thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre
with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick
densified edges calicum silicate ceiling tiles of approved texture (Spintone /
Cosmos/hexa) in the grid, including, cutting/ making opening for services like
diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required.
Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size
25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners,
4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8
mm, spaced at 1200 mm centre to centre along main 'T' , bottom exposed with
24 mm of all T-sections shall be pre-painted with polyster baked paint, for all
heights, as per specifications, drawings and as directed by engineer-in-charge.
Note :- Only calcium silicate false ceiling area will be measured from wall to
wall. No deduction shall be made for exposed frames/opening (cut outs) having
area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC. value
of 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476
part IV, 100% humidity resistance and also having thermal conductivity<0.043
w/m 0 KC.
Code
8589
8590
8591
8592
8593
8615
8616
7388
Description
Details of cost for 100 sqm.
MATERIAL:
Calcium Silicate tegular edged celling tiles
595x595 mm and 15 mm thick
Area = 100 sqm +
Add 5% wastage = 5 sqm
Total = 105 sqm
Galvanised Steel main Tee ceiling section
Size 24x38x0.33 mm (3 metre long)
Galvanised Steel perimeter wall Angle
Size 24 x 24 x 0.40 mm (3.00 metre long)
Galvanised Steel intermediate cross T section
Size 24 x 25 x 0.33 mm (1.2 metre long)
Galvanised Steel intermediate cross T section
Size 24 x 25 x 0.33 mm ( 0.6 metre long)
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
724
Unit
Quantity
Rate
Amount
sqm
105.00
858.00
90090.00
each
29.50
192.00
5664.00
each
13.50
125.00
1687.50
each
147.00
77.00
11319.00
each
147.00
39.00
5733.00
each
each
each
72.00
72.00
72.00
8.00
6.00
50.00
576.00
432.00
3600.00
Code
8617
8595
9999
9999
9999
0111
0114
Description
Unit
Quantity
Rate
Amount
each
each
72.00
100.00
3.00
.60
216.00
60.00
L.S.
L.S.
L.S.
498.65
237.48
310.70
1.70
1.70
1.70
847.70
403.72
528.19
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
138992.11
1389.92
140382.03
21057.30
161439.33
1614.39
1614.40
12.54
12.54.1
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600
and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of
100 gms/ sqm (both sides inclusive) and electro statically polyester powder
coated of thickness 60 microns (minimum), including factory painted after
bending.
.Code
8597
8604
8605
Description
Details of cost for 100 sqm.
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105 sqm
MATERIAL:
GI Metal Tile Clip in Plain Beveled edge
global white colour tiles of size 600x600 mm
and 0.5 mm thick
Spring T-section 24x34x0.45 mm (3.00 meter
long)
Including wastage @ 10%
C Wall angle section 20x30x20x0.50 mm
(3.00 meter long)
725
Unit
Quantity
Rate
Amount
sqm
105.00
895.00
93975.00
metre
60.00
180.00
10800.00
metre
27.70
155.00
4293.50
Code
8606
8607
8608
8609
8610
8615
8616
8617
7388
9999
9999
0111
0114
12.54.2
Code
8598
8604
8605
8606
Description
Unit
Quantity
Rate
Amount
metre
33.00
164.00
5412.00
each
each
each
each
each
each
each
each
44.00
44.00
88.00
333.00
80.00
80.00
80.00
80.00
5.00
11.00
11.00
9.00
8.00
6.00
3.00
50.00
220.00
484.00
968.00
2997.00
640.00
480.00
240.00
4000.00
L.S.
L.S.
188.00
90.00
1.70
1.70
319.60
153.00
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
142817.10
1428.17
144245.27
21636.79
165882.06
1658.82
1658.80
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600
and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of
100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia
holes and having NRC of 0.5, electro statically polyester powder coated of
thickness 60 microns (minimum), including factory painted after bending and
perforation.
Description
Details of cost for 100 sqm.
Celling Area =100 sqm
Add wastage @ 5% = 5 sqm.
Total=105 sqm
MATERIAL:
GI Metal Tile Clip in Perforated Beveled edge
global white colour tiles of size 600x
600 mm and 0.5 mm thick
Spring T-section 24x34x0.45 mm (3.00 meter
long)
Including wastage @ 10%
C Wall angle section 20x30x20x0.50 mm
(3.00 meter long)
Including wastage @ 10%
Main C Carrier Size 10x38x10x0.70 mm
(3.00 meter long)
Including wastage @ 10% on grid for cut outs
726
Unit
Quantity
Rate
Amount
sqm
105.00
1000.00
105000.00
metre
60.00
180.00
10800.00
metre
27.70
155.00
4293.50
metre
33.00
164.00
5412.00
Code
8607
8608
8609
8610
8615
8616
8617
7388
9999
9999
0111
0114
12.55
Code
1204
3.9
0367
0368
2209
0875
0124
0115
0139
0101
0013
Description
Unit
Quantity
Rate
Amount
Spring T-connector
C Carrier Connector
C Suspension Clip
Wire Coupling Clip
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Sundries i.e. scaffolding etc.
Carriage of materials etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100 sqm
Cost of 1 sqm
Say
each
each
each
each
each
each
each
each
44.00
44.00
88.00
333.00
80.00
80.00
80.00
80.00
5.00
11.00
11.00
9.00
8.00
6.00
3.00
50.00
220.00
484.00
968.00
2997.00
640.00
480.00
240.00
4000.00
L.S.
L.S.
188.00
90.00
1.70
1.70
319.60
153.00
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
153842.10
1538.42
155380.52
23307.08
178687.60
1786.88
1786.90
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm)
with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance
>0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement
sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints
with mix of white cement & marble powder in ratio of 1:1, including rubbing and
polishing of the surface upto 3 cuts complete, including providing skirting upto
150 mm height along the parapet walls in the same manner.
Description
Details of cost for 10 sqm.
Area= 10 sqm+
Add wastage @ 3%=0.3 sqm
Total=10.30 sqm
MATERIAL:
Precast heat resistant terrace tiles (size
300x300 mm) and 20 mm thick
Cement mortar 1:4 (1 cement : 4 coarse sand)
Rate as per Item Number 3.9 of SH: Mortars
Portland Cement
White Cement
Carriage of cement
Red, chocolate, orange, buff or yellow
(red oxide of iron) light shade pigment
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
727
Unit
Quantity
Rate
Amount
sqm
10.30
482.00
4964.60
cum
tonne
tonne
tonne
kilogram
0.224
0.044
0.044
0.088
3.08
3654.15
5240.00
14000.00
94.80
75.00
818.53
230.56
616.00
8.34
231.00
day
day
day
day
day
1.60
2.00
1.00
1.00
1.60
361.00
297.00
328.00
328.00
350.00
577.60
594.00
328.00
328.00
560.00
Code
9999
12.56
Code
7050
7051
7052
9999
9999
7053
9999
9999
9999
9999
9999
9999
Description
Unit
L.S.
Quantity
169.98
Rate
1.70
Amount
288.97
9545.60
95.46
9641.06
1446.16
11087.22
1108.72
1108.70
728
Unit
Quantity
Rate
Amount
sqm
1.00
41.00
41.00
sqm
1.10
421.00
463.10
sqm
L.S.
L.S.
sqm
1.00
6.71
20.13
1.00
27.00
1.70
1.70
15.00
27.00
11.41
34.22
15.00
L.S.
L.S.
L.S.
L.S.
44.67
13.75
21.48
16.78
1.70
1.70
1.70
1.70
75.94
23.38
36.52
28.53
L.S.
L.S.
80.54
53.69
1.70
1.70
136.92
91.27
984.29
9.84
994.13
149.12
1143.25
1143.25
12.57
Code
7232
9999
0111
0114
9999
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool
conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200 G
Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held
in position by criss crossing GI wire etc. complete as per directions of Engineerin-Charge.
Description
Details of cost for 10 sqm.
MATERIAL:
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add Wastage @ 10% =1.00 sqm
Total =11.00sqm
Resin Bonded Glass wool 24 kg/ m3:
50 mm thick
Sundries including GL wire 20 SWg and
Virgin polythene bags 200 gram
LABOUR:
Carpenter 1 st class
Beldar
Sundries (screws and washers)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
204.00
2244.00
L.S.
52.00
1.70
88.40
day
day
L.S.
0.50
0.50
20.00
393.00
297.00
1.70
196.50
148.50
34.00
2711.40
27.11
2738.51
410.78
3149.29
314.93
314.95
12.58
Providing and fixing tiled false ceiling of approved materials of size 595x595
mm in true horizontal level, suspended on interlocking metal grid of hot dipped
galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive)
consisting of main "T" runner with suitably spaced joints to get required length
and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at
1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm
thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center
to center to form a grid of 1200x600 mm and secondary cross "T" of length 600
mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked
at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle
of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the
grid including, required cutting/making, opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended
from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling
with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with
galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm
center to center along main T, bottom exposed width of 24 mm of all T-sections
shall be pre-painted with polyester paint, all complete for all heights as per
specifications, drawings and as directed by Engineer-in-charge.
12.58.1
8 mm thick fully perforated calcium silicate board made with Calcareous &
Siliceous materials reinforced with cellulose fiber manufactured through
729
8784
8611
8612
8613
8614
8615
8616
8617
7388
9999
9999
0111
0114
12.59
Description
Details of cost for 100.00 sqm.
MATERIAL:
Details of cost for 100 sqm
Ceiling area = 100 sq.m
Add wastage @ 5% = 0.05 Sq.m
Total =100.05 sqm
MATERIAL:
8 mm thick Calcium silicate perforated tiles
of size 595 x595 mm
Main T ceiling sections 24x38x0.3 mm
(3 metre long)
including wastage of 10%
Perimeter wall angle 24 x 24 x 0.3 mm
(3 metr long)
including wastage of 10%
Intermediate cross T-Section 24x25x
0.3 mm (1.2 m long)
including wastage of 10% on grid for cut outs
Intermediate cross T-Section 24x25x
0.3 mm (0.6 m long)
including wastage of 10% on grid for cut outs
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Soffit cleat (Size 27x37x25x1.60 mm)
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Cariage of materials
Sundries i.e scaffolding etc.
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 100.00 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
100.05
688.00
68834.40
each
29.50
187.00
5516.50
e each
13.50
118.00
1593.00
each
147.00
72.00
10584.00
each
147.00
34.00
4998.00
each
each
each
each
72.00
72.00
72.00
72.00
8.00
6.00
3.00
50.00
576.00
432.00
216.00
3600.00
L.S.
L.S.
89.28
187.95
1.70
1.70
151.78
319.52
day
day
28.00
23.00
393.00
297.00
11004.00
6831.00
114656.20
1146.56
115802.76
17370.41
133173.17
1331.73
1331.75
Providing & fixing false ceiling at all height including providing & fixing of
framework made of special section, power pressed from M.S. sheets and
galvanised with zinc coating of 120 gms/ sqm ( both side inclusive) as per IS :
277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges
of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash
fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed
to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of
730
required size and other end of angle hanger fixed with intermediate G.I chanels
45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling
section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm
each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction
perpendicular to G.I intermediate channel with connecting clip made out of
2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter
channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the
perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm
centre, with 25mm long dry wall screws @ 230mm interval, including fixing of
Calcium Silicate Board to ceiling section and perimeter channels with the help
of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing
to a flush finish of tapered and square edges of the board with recommended
jointing compounds, jointing tapes,finishing with jointing compounds in three
layers covering up to 150mm on both sides of joints and two coats of primer
suitable for boards, all as per manufacture's specification and also including
the cost of making opening for light fittings, grills, diffusers, cut outs made
with frame of perimeter channels suitably fixed, all complete as per drawings,
specificaton and direction of the Engineer in charge but excluding the cost of
painting with.
12.59.1
Code
8785
7010
7011
7012
7013
7014
1022
8617
7020
7016
7017
7388
7018
a. 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials
reinforced with cellulose fiber manufactured through autoclaving process.
Description
Details of cost for 103.68 sqm.
Details of cost for 10.8 m x 9.6m =
103.68 sqm
MATERIAL:
Area = 103.68 sq.m + Add. Wastage of
5% = 5.18 sqm
Total = 108.86 sqm
8 mm thick tapered edge calcium silicate
board
Galvanised Steel celling section (size 80x
26x0.50 mm)
Galvanised Steel perimetre Channel (Size
20x27x30x0.50 mm)
Galvanised Steel intermediate Channel (Size
15x45x15x0.90 mm)
Galvanised Steel angle hanger (Celling angle)
(Size 25x10x0.50 mm)
Galvanised Steel connecting clips (2.64 mm
dia and 230 mm long GI wire)
Galvanised steel bolts & nuts 6 mm dia
and 25 mm long round head with slots
Soffit cleat (Size 27x37x25x1.60 mm)
All drive screws ( for gypsum board)
Joint filler
Joint finisher
Dash hold fastener 12.5 mm dia, 50 mm
long with 6 mm dia bolt
Joint tape roll
731
Unit
Quantity
sqm
108.86
368.00
40060.48
metre
238.14
39.00
9287.46
metre
41.84
27.00
1129.68
metre
90.72
42.00
3810.24
metre
10.80
19.00
205.20
each
189.00
6.20
1171.80
10 Nos
216.00
25.00
540.00
each
100 Nos
kilogram
kilogram
each
72.00
1000.00
22.81
34.21
72.00
3.00
60.00
22.00
24.00
50.00
216.00
600.00
501.82
821.04
3600.00
1.27
145.00
184.15
roll
Rate
Amount
Code
7021
9999
9999
0112
0114
0131
12.60
Code
7273
9999
9999
0111
0114
Description
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
18.66
447.20
807.30
85.00
1.70
1.70
1586.10
760.24
1372.41
day
day
day
31.10
31.10
10.37
361.00
297.00
361.00
11227.10
9236.70
3743.57
90053.99
900.54
90954.53
13643.18
104597.71
1008.85
1008.85
732
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
11.00
351.00
104.00
211.00
1.70
1.70
2321.00
596.70
176.80
day
day
1.00
2.00
393.00
297.00
393.00
594.00
4081.50
40.82
4122.32
618.35
4740.67
474.07
474.05
12.61
Code
7273
9999
0111
0114
12.62
Code
7273
9999
0111
0114
9999
Providing and fixing thermal insulation with Resin bonded rock wool conforming
to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags
placed over existing false ceilng and held in position by criss- crossing GI wire.
Description
Details of cost for 10.00 sqm.
Area for 10.00sqm.
(Finished surface)= 10.00sqm.+
Add 10% for ovelappings & wastage=
1.00sqm.
Total= 11.00sqm
MATERIAL:
Resin Bonded Rockwool 48 kg/m3
Sundries including GI wire 20 SWG and
polythene bags 200gms
LABOUR:
Carpenter 1st class
Beldar
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10.00 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
L.S.
11.00
52.00
211.00
1.70
2321.00
88.40
day
day
0.50
0.50
393.00
297.00
196.50
148.50
2754.40
27.54
2781.94
417.29
3199.23
319.92
319.90
Providing and fixing thermal insulation with Resin Bonded rock wool conforming
to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene
Bags fixed to wall wirh screw, rawel plug & washers and held and in position by
criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.
Description
Details of cost for 10 sqm.
(Finished surface) = 10.00sqm.+
Add 10 % for overlapping and wastage =
1.00 sqm
Total=11.00sqm
MATERIAL:
Resin Bonded Rockwool 48 kg/m3
Sundries including GI wire 20 SWg and Virgin
polythene bags 200 gram and Carriage
LABOUR:
Carpenter 1st class
Beldar
sundries (screws & washers)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10.00 sqm
Cost of 1 sqm
Say
733
Unit
Quantity
Rate
Amount
sqm
L.S.
11.00
52.00
211.00
1.70
2321.00
88.40
day
day
L.S.
0.50
0.50
20.00
393.00
297.00
1.70
196.50
148.50
34.00
2788.40
27.88
2816.28
422.44
3238.72
323.87
323.85
12.63
Code
7238
9999
0131
0114
9999
Providing and applying two coats of High Albedo paint having minimum Solar
Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per
ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating
thickness and the methodology of application shall strctly as per manufacturer's
specifications and as approved by engineer In charge. Surface preparation
includes cleaning with metal wire brush to remove all dust, fungus etc., washing
with water all complete. The contractor shall give guarantee for the perfomance
of SRI and also the durabitity of coating, all complete as per direction of
Engineer-in-incharge.
Description
Details of cost for 10 sqm.
MATERIAL:
High Albedo paint
Carriage of paint
LABOUR:
Painter
Beldar
(for cleanign the surface)
Sundries (Brushes & T&P etc.)
TOTAL
Add Water Charges @ 1%
TOTAL
Add CPOH @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
734
Unit
Quantity
Rate
Amount
kg
L.S.
7.17
4.53
246.00
1.70
1763.82
7.70
day
day
0.54
0.54
361.00
297.00
194.94
160.38
L.S.
13.52
1.70
22.98
2149.82
21.50
2171.32
325.70
2497.02
249.70
249.70
S.NO.
Reference No.
Contents in Brief
S.NO.
Reference No.
Contents in Brief