Professional Documents
Culture Documents
DESIGN AND ANALYSIS - PPT PDF
DESIGN AND ANALYSIS - PPT PDF
OF
MULTI-STORIED BUILDING
By :
K.Uday kumar(09245A0103)
K.Nagendra babu(08241A0123)
Md.Khaja taqiuddin(08241A0117)
CONTENTS
1.
2.
3.
4.
5.
6.
7.
INTRODUCTION
CODES
STATEMENT OF THE PROJECT
LOADS ON THE STRUCTURE
OBJECTIVE OF STRUCTURAL DESIGN
DESIGN AND ANALYSIS
REFERENCES
INTRODUCTION
Our
CODES
z IS-456:2000
z IS-875(PART1)
z IS-875(PART2)
z IS-875(PART3)
Geometric details :
Ground Floor :
9.0 MFloorFloor Height :
3.0 M
Height of Plinth:
0.6 M above G.L
Depth of Foundation:2 M below G.L
Material details :
Concrete Grade
:
M25
Grade of steel
:
HYSD
REINFORCEMENT of Grade Fe415
Bearing Capacity of Soil :
200 KN/M2
Type Of Construction
:
R.C.C
framed structure
loads
zImposed loads
zWind loads
Dead loads
zInvolves
selfweight of
zRCC slab
zBeams & columns
zPlinth
zWalls
Imposed loads
zImposed
Wind loads
z Wind
is air in motion
z Wind
z Intensity
Load combinations
zThe
design
z Column design
z Beam design
z Slab design
Density
24.0 KN/m3
25.0 KN/m3
20.0KN/m3
19.0KN/m3
5.0KN/m3
3.0KN/m2
3.0KN/m2
3.0KN/m2
Structural design
For slabs,Depth is 130 mm provided & min
depth is 90mm
Factored Load on slab is 12Kn/m
For beams,after calculations are done.the
Dimensions of beam is 230*350mm
Factored load on beam is 15.87Kn/m
ANALYSIS
z Analysis
RCC analysis
z
concrete design
Member takeoff
Conclusions
Staad pro become more and more critical
in the analysis of engineering & scientific
problems
z This facilities for the implementations of
more effective & professional engineering
software
z It should be affordable to promote their
wide spread usage amongst civil engg at a
global scale
z
REFERENCES
z Structural
analysis by S.RAMAMRUTHAM
z IS456-2000
z AUTO
CODE used
z Design
Thank you!