Professional Documents
Culture Documents
Page 1
2 DOORS IN PARTITION
2.1 WOODEN DOORS
2.1 Providing & fixing 35 mm BWR thick solid core flush with
85 X 15 mm beech wood jamb alround and 12 X 12 mm
button beading fixed with 1 mm laminate (dark for bands
and light for body) on both sides and 8 mm clear float
glass with etching design as directed with 50 X 15 mm
beech wood jamb alround the glass opening and 12 X 12
mm beech wood beading for fixing of glass on both sides
including necessary hardware viz: door stopper, door
silencer, Doorset lock (Godrej etc.), handles, brass hinges
of approved make & quality, melamine spray polish finish
to all beech wood members etc. complete as directed.
6.00 Sq.M
2.2 ALUMINIUM DOORS
Providing & fixing in position Aluminum glazed door
comprising of 1.5 mm thick 83.5 mm vertical member, top
& bottom and middle member, powder coated in black
colour, floor spring & pivot on top. Providing & fixing 6
mm thick clear glass using aluminum beading with rubber
gasket etc. providing & fixing customised door handle etc.
complete.
4.20 Sq.M
3 WALL PANELLING
79.00 Sq.M
4 STORAGE UNITS
Supplying, manufacturing & fixing follwing sizes wooden
storage system made out of 19mm thick BWR grade block
board for front, side, back, top & bottom and pasted with
1.0 mm thick approved laminate and providing shutters
with spring loaded hinges of approved make including the
cost of providing handles, lock, required no. of shelves,
filing hangers, latches, magnet catch, etc. as required and
matching finish the counters & interiors. The rate should
be inculsive of painting with 2 coats of enamel paint. (The
design should be got approved from the Bank before
execution).
Page 2
4.2 Full height storage – 2100mm high 38.00 Sq.M
5 SIDE TABLE
Supplying following sizes side tables made out of 19mm
thick block board BWR grade with drawers, shelves,
openable shutters with spring loaded hinges etc. All the
exposed surfaces shall be pasted with 1 mm thick laminate
of approved colour/ make. The inside/ inner surfaces shall
be painted with 2 coats of enamel paint. The rate should
inclusive of all necessary hardwares, locks, handles
complete with polishing etc. (The design of the table
should be got approved by the bank before
commencement of work.) (The below given sizes may vary
according to the site conditions. hence the contractor
should confirm the size of table before supply and the
variation in rate will be worked out in case of change in
size)
95.00 Sq.M
Page 3
6.2 2'-0”X2'-0” Silhouette Grid False Ceiling:- Providing
and fixing in true horizontal level false ceiling grid system
of Armstrong World Industries/Insula/Daikin etc.. The
suspension system shall be 2'-0”X2'-0” plain grid system
with 15mm wide flanges main runners and cross tees to
have mitred ends with “birds mouth “ notches to provide
mitred cruciform junctions. Main runners to be spaced at
4'-0” fixed by using 2mm pre-straightened GI wire. Main
tee, rotary stitched of size 15mm x 44mm x 3600mm at
every 4'-0” c/c maximum and 4'-0” cross tee of size 15mm
x 44mm x 1200mm at every 2'-0” c/c maximum and 2'-0”
cross tee of size 15mm x 44mm x 600mm at every 4'-0”
c/c maximum and 19mm x 19mm x 3000mm wall angle
alround the wall to form grid size of 2'-0” x 2'-0” and
suspending the grid using 2mm pre-straightened GI wire
and 6mm nylon rawl plug at every 4'-0” intervals at the
main tee and laying of 15 mm thick mineral fiber tiles
manufactured by Armstrong/Insula/Daikin etc. of size 2'-
0”X 2'-0” 15mm over the formed grid etc., complete as
directed.
80.00 Sq.M
7 TABLES
Providing and making tables of following sizes with two
drawers & one cabinet units made out of 19mm thick
block board BWR grade of approved make (chemicaly
treated). All the exposed surfaces shall be pasted with
1mm thick laminate of approved colour/ make. The inside/
inner surfaces shall be painted with 2 coats of enamel
paint. The rate should inclusive of the cost of providing
key board drawer with telescopic channel, all necessary
edge beading/ moulding, foot rest,CPU stands sliding
channels for drawers, hardwares, locks, handles complete
with polishing etc. (The design of the table should be got
approved by the bank before commencement of work.)
7.1 6'x3'
2.00 Nos.
7.2 5' X 2' 4.00 Nos.
7.3 5' X 2'6” 4.00 Nos.
Page 4
8 WALL PAINTING
Plastic emulsion paint : Cleaning the surface of the wall &
applying two coats of wall putty followed by one coat of
primer and applying a minimum of two coats of acrylic
emulsion paint of Asian or equivalent make of approved
shade to give neat uniform finish. Rate to included cost of
all materials, labour, brushes, scaffolding etc. complete.
350.00 Sq.M
9 FLOOR SPRINGS
Supplying & fixing heavy duty floor springs of approved
make for doors as instructed by the Engineer.
4.00 Nos.
10 DOOR CLOSER
Supplying & fixing heavy duty door closers of approved
make for doors as instructed by the Engineer. 2.00 Nos.
11 VERTICAL BLINDS
Supplying & fixing in position of vertical Blinds of "Vista" or 30.00 Sq.M
"Touch".
12 DISMANTLING WORKS
Dismantling existing false ceiling(approx.1000 s.ft.), wall
panelling(approx.1000 s.ft.) etc. without damage to
existing structures and shifting of debris as instructed by
the Engineer. L.S
13 ALTERATION OF EXISTING CONFERENCE TABLE
Alteration of existing conference table to required size as
per instruction and necessary rectification of damaged
patches with matching ply and laminates.
L.S
14 DEMOLISHING OF CHUJJA
Demolishing existing RCC chujja .Removal of debris out of
site.Plastering and painting the affected area to be flush
with the existing wall.
L.S
15 STEPS
Demolishing existing Kadappa steps and providing new
wooden steps made out of 19mm thick plywood as per
drawing. The exposed area maybe painted with 2 coats
enamel paint. L.S
16 BUYBACK OF EXISTING TABLES,RUNNING
TABLE,SIDE STORAGES (Tables – 3nos.,Running Table-100
R.ft approx., Storage-approx.60s.ft)
L.S
SUB-TOTAL
DISCOUNT ,IF ANY
Page 5