Professional Documents
Culture Documents
Coordinators:
Prof.univ.dr.ing. Gabriela Maria Atanasiu
As.Cerasela Olariu
Student:
Group:
Assignment no.1
Input data:
L=6.4 m
m=17.9 t =17900 Kg
h=6.4 m
6.
4
6.4
12.8
12.8
6.4
I.Analysis of a truss
structure
Step 1
Adjusting Grids
Define Menu ->Coordinate Systems/Grids -> Choose
Modify/Show System
Suports
Assign->Joint->Restraints
SSIGN->joint->Masses
Analysis options
Results
Display->Show Deformed Shape
Axial Force
Assignment no.2
Perform the
static and
modal analysis
for the
following 3D
structure
using
SAP2000.
The structure
is made of RC ,
class C20/25
ASSIGN->JOINT LOADS->FORCES
ASSIGN->AREA LOADS-UNIFORM
SHELL
LOAD PATTERNS
Load combination
DEFINE->LOAD COMBINATION->ADD NEW COMBO
STATIC ANALYSIS
ANALYZE-RUN ANALYSIS
MODAL ANALYSIS
1*Dead+0.4*Live+0.4*Snow
DEFINE->MASS SOURCE->ADD NEW MASS