Professional Documents
Culture Documents
V900R013C00
KPI Reference
Issue
04
Date
2012-06-25
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 04 (2012-06-25)
RAN
KPI Reference
Product Versions
The following table lists the product versions included in this document.
Product Name
Product Version
BSC6900
V900R013C00
NodeB
V100R013
NodeB
V200R013
Intended Audience
This document is intended for:
l
Field engineers
System engineers
Organization
1 Changes in the RAN KPI Reference
This chapter describes the changes made in the RAN KPI Reference.
2 Accessibility
Accessibility is the ability of a user to obtain the requested service from the system. RRC
connection and RAB setup are the main procedures of accessibility.
Issue 04 (2012-06-25)
ii
RAN
KPI Reference
3 Availability
Availability KPIs mainly indicate the utilization for several kinds of network resources such as
Radio, bandwidth or CPU Load.
4 Coverage
Coverage KPIs are used for monitoring cell Interference status and Soft Handover Gain in an
RNC or a cluster.
5 Mobility
Mobility KPIs are used to monitor the successful ratio for several kinds of handover features or
service mode changing in difference scenarios.
6 Retainability
Retainability is defined as the ability of a user to retain its requested service for the required
duration once connected. The RNC level KPIs can be calculated by aggregating all the cell
counters and Iur counters.
7 Service Integrity
Service Integrity KPIs mainly indicate the service capabilities for PS/HSPA throughput during
busy hours in each cell and the service UL Average BLER for evaluating the UL BLER value
of services in each cell.
8 Traffic
Traffic-related KPIs are used to check the circulated traffic such as CS Equivalent Erlang, PS
Traffic, and Mean UE number for various kinds of services in an RNC or a Cluster.
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or supplement
important points of the main text.
Issue 04 (2012-06-25)
iii
RAN
KPI Reference
General Conventions
The general conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
Italic
Courier New
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention
Description
Boldface
Italic
[]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... }*
[ x | y | ... ]*
GUI Conventions
The GUI conventions that may be found in this document are defined as follows.
Issue 04 (2012-06-25)
Convention
Description
Boldface
>
iv
RAN
KPI Reference
Keyboard Operations
The keyboard operations that may be found in this document are defined as follows.
Format
Description
Key
Press the key. For example, press Enter and press Tab.
Key 1+Key 2
Key 1, Key 2
Mouse Operations
The mouse operations that may be found in this document are defined as follows.
Issue 04 (2012-06-25)
Action
Description
Click
Double-click
Drag
Press and hold the primary mouse button and move the
pointer to a certain position.
RAN
KPI Reference
Contents
Contents
About This Document.....................................................................................................................ii
1 Changes in the RAN KPI Reference..........................................................................................1
2 Accessibility....................................................................................................................................5
2.1 IU Paging Success Ratio.....................................................................................................................................7
2.2 RRC Setup Success Ratio...................................................................................................................................7
2.3 Radio Access Success Ratio.............................................................................................................................10
2.4 PS Radio Access Success Ratio........................................................................................................................11
2.5 CS Radio Access Success Ratio.......................................................................................................................12
2.6 AMR RAB Setup Success Ratio......................................................................................................................13
2.7 VP RAB Setup Success Ratio..........................................................................................................................14
2.8 CS RAB Setup Success Ratio...........................................................................................................................15
2.9 PS RAB Setup Success Ratio...........................................................................................................................15
2.10 HSDPA RAB Setup Success Ratio................................................................................................................16
2.11 HSUPA RAB Setup Success Ratio................................................................................................................17
2.12 PS E-FACH RAB Setup Success Ratio..........................................................................................................18
2.13 CS over HSPA RAB Setup Success Ratio.....................................................................................................18
2.14 HSDPA 64QAM RAB Setup Success Ratio..................................................................................................19
2.15 HSDPA MIMO RAB Setup Success Ratio....................................................................................................20
2.16 HSDPA DC RAB Setup Success Ratio..........................................................................................................20
2.17 HSDPA MIMO64QAM RAB Setup Success Ratio.......................................................................................21
2.18 PTM Channel Setup Success Ratio................................................................................................................22
2.19 PTP Channel Setup Success Ratio..................................................................................................................22
2.20 RRC Congestion Ratio...................................................................................................................................23
2.21 CS RAB Congestion Ratio.............................................................................................................................24
2.22 PS RAB Congestion Ratio..............................................................................................................................25
3 Availability...................................................................................................................................26
3.1 Worst Cell Ratio...............................................................................................................................................28
3.2 Paging Congestion Ratio..................................................................................................................................28
3.3 Call Admission Refused Ratio.........................................................................................................................29
3.4 Congested Cell Ratio........................................................................................................................................30
3.5 Radio Network Unavailability Ratio................................................................................................................31
3.6 Average CPU Load...........................................................................................................................................31
Issue 04 (2012-06-25)
vi
RAN
KPI Reference
Contents
4 Coverage........................................................................................................................................41
4.1 UL Interference Cell Ratio...............................................................................................................................42
4.2 Soft Handover Overhead..................................................................................................................................42
5 Mobility.........................................................................................................................................45
5.1 Soft Handover Success Ratio...........................................................................................................................47
5.2 Softer Handover Success Ratio........................................................................................................................47
5.3 AMR Soft Handover Success Ratio.................................................................................................................48
5.4 CS64 Soft Handover Success Ratio..................................................................................................................49
5.5 PS Soft Handover Success Ratio......................................................................................................................49
5.6 Intra-frequency Hard Handover Success Ratio................................................................................................50
5.7 Inter-frequency Hard Handover Success Ratio................................................................................................51
5.8 Service Cell Change Success Ratio with SHO (H2H).....................................................................................51
5.9 H2H Intra-Frequency Hard Handover Success Ratio.......................................................................................52
5.10 H2H Inter-Frequency Hard Handover Success Ratio.....................................................................................53
5.11 H2D Inter-frequency Hard Handover Success Ratio......................................................................................54
5.12 H2D Channel Switch Success Ratio...............................................................................................................55
5.13 D2H Channel Switch Success Ratio...............................................................................................................56
5.14 CS W2G Inter-RAT Handover Out Success Ratio.........................................................................................57
5.15 PS W2G Inter-RAT Handover Out Success Ratio.........................................................................................58
5.16 PS G2W Inter-RAT Handover In Success Ratio............................................................................................59
5.17 HSDPA W2G Inter-RAT Handover Out Success Ratio................................................................................59
5.18 SRNC Relocation Success Ratio....................................................................................................................60
5.19 TRNC Relocation Success Ratio....................................................................................................................61
5.20 E-DCH Soft Handover Success Ratio............................................................................................................62
5.21 E-DCH Cell Change Success Ratio with SHO...............................................................................................62
5.22 E-DCH Cell Change Success Ratio with Inter-HHO.....................................................................................64
5.23 E2D Channel Switch Success Ratio...............................................................................................................65
5.24 D2E Channel Switch Success Ratio...............................................................................................................65
Issue 04 (2012-06-25)
vii
RAN
KPI Reference
Contents
6 Retainability.................................................................................................................................69
6.1 CS Service Drop Ratio.....................................................................................................................................70
6.2 AMR Call Drop Ratio.......................................................................................................................................70
6.3 VP Call Drop Ratio...........................................................................................................................................71
6.4 AMR Traffic Drop Ratio..................................................................................................................................72
6.5 VP Traffic Drop Ratio......................................................................................................................................74
6.6 PS Call Drop Ratio...........................................................................................................................................74
6.7 PS Call Drop Ratio (PCH)................................................................................................................................75
6.8 PS R99 Call Drop Ratio....................................................................................................................................76
6.9 PS R99 Call Drop Ratio (PCH)........................................................................................................................77
6.10 PS BE Call Drop Ratio...................................................................................................................................78
6.11 HSDPA Call Drop Ratio.................................................................................................................................79
6.12 HSDPA Call Drop Ratio (PCH).....................................................................................................................80
6.13 HSUPA Call Drop Ratio.................................................................................................................................81
6.14 HSUPA Call Drop Ratio (PCH).....................................................................................................................83
6.15 MBMS Service PTP drop Ratio.....................................................................................................................84
7 Service Integrity...........................................................................................................................85
7.1 Average UL Throughput for PS R99 Service...................................................................................................86
7.2 Average DL Throughput for PS R99 Service...................................................................................................87
7.3 Average UL BLER for CS Service...................................................................................................................88
7.4 Average UL BLER for PS Service...................................................................................................................88
7.5 HSDPA Throughput.........................................................................................................................................89
7.6 HSUPA Throughput.........................................................................................................................................90
7.7 PS UL Throughput of RNC..............................................................................................................................91
7.8 PS DL Throughput of RNC..............................................................................................................................92
7.9 MBMS Service Throughput.............................................................................................................................93
8 Traffic.............................................................................................................................................94
8.1 CS Equivalent Erlang of RNC..........................................................................................................................95
8.2 Number of CS Users.........................................................................................................................................95
8.3 Number of PS R99 Users..................................................................................................................................96
8.4 Number of HSDPA Users...............................................................................................................................101
8.5 Number of HSUPA Users...............................................................................................................................101
8.6 Number of E-FACH Users.............................................................................................................................102
8.7 Number of CS Over HSPA Users...................................................................................................................102
8.8 Number of HSDPA 64QAM Users................................................................................................................103
8.9 Number of HSDPA MIMO Users..................................................................................................................103
8.10 Number of HSUPA 16QAM users...............................................................................................................104
8.11 Number of HSDPA MIMO64QAM Users...................................................................................................104
Issue 04 (2012-06-25)
viii
RAN
KPI Reference
Contents
Issue 04 (2012-06-25)
ix
RAN
KPI Reference
This chapter describes the changes made in the RAN KPI Reference.
04 (2012-06-25)
This is the fourth commercial release of V900R013C00.
Compared with issue 03 (2012-02-27), this issue does not include any new topics.
Compared with issue 03 (2012-02-27), this issue incorporates the following changes:
Content
Description
Compared with issue 03 (2012-02-27), this issue does not exclude any topics.
03 (2012-02-27)
This is the third commercial release of V900R013C00.
Compared with issue 02 (2011-08-31), this issue does not include any new topics.
Compared with issue 02 (2011-08-31), this issue incorporates the following changes:
Content
Description
Compared with issue 02 (2011-08-31), this issue does not exclude any topics.
Issue 04 (2012-06-25)
RAN
KPI Reference
02 (2011-08-31)
This is the second commercial release of V900R013C00.
Compared with issue 01 (2011-04-25), this issue does not include any new topics.
Compared with issue 01 (2011-04-25), this issue incorporates the following changes:
Content
Description
Compared with issue 01 (2011-04-25), this issue does not exclude any topics.
01 (2011-04-25)
This is the first commercial release of V900R013C00.
Compared with issue Draft A (2011-01-31), this issue does not include any new topics.
Compared with issue Draft A (2011-01-31), this issue does not incorporate any changes.
Compared with issue Draft A (2011-01-31), this issue does not exclude any topics.
Draft A (2011-01-31)
This is the Draft A release of V900R013C00.
Compared with issue 02 (2010-09-20) of V900R012C01, this issue does not include any new
topics.
Compared with issue 02 (2010-09-20) of V900R012C01, this issue incorporates the following
changes:
Content
Description
Issue 04 (2012-06-25)
RAN
KPI Reference
Content
Description
Compared with issue 02 (2010-09-20) of V900R012C01, this issue does not exclude any topics.
Compared with issue 01 (2010-04-10) of V900R012C01, this issue includes the following new
topics:
l
Issue 04 (2012-06-25)
RAN
KPI Reference
Compared with issue 01 (2010-04-10) V900R012C01, this issue incorporates the following
changes:
Content
Description
Compared with issue 01 (2010-04-10) V900R012C01, this issue does not exclude any topics.
Issue 04 (2012-06-25)
RAN
KPI Reference
2 Accessibility
Accessibility
RAN
KPI Reference
2 Accessibility
Issue 04 (2012-06-25)
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the successful paging responses to the pagings
from the Core Network (CN) in one RNC.
The Attempt Paging Procedure starts when the CN sends a PAGING
message to the RNC, and is complete when the UE in idle mode receives
the PAGING TYPE 1 message from the RNC.
The Successful Paging Procedure is complete when the RNC receives an
RRC CONNECTION REQUEST message from the UE in idle mode.
Associated
Counters
Object
RNC
Unit/Range
Note
None
(VS.RANAP.Paging.Succ.IdleUE/VS.RANAP.Paging.Att.IdleUE) x
100%
Formula
Issue 04 (2012-06-25)
RAN
KPI Reference
2 Accessibility
Description
Issue 04 (2012-06-25)
RAN
KPI Reference
2 Accessibility
Associated
Counters
Issue 04 (2012-06-25)
RAN
KPI Reference
2 Accessibility
RRC.AttConnEstab.Reg +
RRC.AttConnEstab.Detach )] x 100%
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Formula
Description
This KPI is used to check the Radio Access Success Ratio. The details of the
Access Failures caused by the SCCP congestion are not provided in this call
setup procedure.
Description of the RAB Setup Attempt Procedure and the RAB Setup Success
Procedure:
The RAB Setup Attempt Procedure starts when the CN sends an RAB
ASSIGNMENT REQUEST message to the RNC. The message contains
information about one of the following service types: CS Conversational
RAB Establishments, CS Streaming RAB Establishments, PS Conversational
RAB Establishment, PS Background RAB Establishments, PS Interactive
RAB Establishments, PS Streaming RAB Establishments. The RAB Setup
Attempt Procedure is complete When the RNC receives an RAB
ASSIGNMENT REQUEST message from the CN.
The RAB Setup Success Procedure is complete when the RNC sends to the
CN an RAB ASSIGNMENT RESPONSE message.
Issue 04 (2012-06-25)
10
RAN
KPI Reference
2 Accessibility
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
Issue 04 (2012-06-25)
11
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the PS Radio Access Success Ratio. The details of
the Access Failures caused by the SCCP congestion are not provided in this
call setup procedure.
The PS RRC Setup Attempt Procedure is complete when the RNC receives
an RRC CONNECTION REQUEST message from the UE. The message
contains information about one of the following service types: Originating
Interactive Call, Terminating Interactive Call, Originating Background Call,
Terminating Background Call.
The PS RRC Setup Success Procedure is complete when the RNC receives
an RRC CONNECTION SETUP COMPLETE message from the UE.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
12
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the Radio Access Success Ratio. The details of the
Access Failures caused by the SCCP congestion are not provided in this call
setup procedure.
The CS RRC Setup Attempt Procedure is complete when the RNC receives
an RRC CONNECTION REQUEST message from the UE.The message
contains information about one of the following service types: Originating
Conversational Call, Terminating Conversational Call, Emergency Call.
The CS RRC Setup Success Procedure is complete when the RNC receives
an RRC CONNECTION SETUP COMPLETE message from the UE.
Associated
Counters
Object
CELL,RNC
Unit/Range
Note
None
13
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the AMR Service.
AMR RAB Setup Attempt Procedure is complete when the RNC receives an
RAB ASSIGNMENT REQUEST message from the CN for the CS narrow
band AMR services.
The AMR RAB Setup Success Procedure starts when the UE sends a RADIO
BEARER SETUP COMPLETE message to the RNC. This procedure is
complete when the RNC sends an RAB ASSIGNMENT RESPONSE
message to the CN in the CS domain.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.RAB.SuccEstabCS.AMR/VS.RAB.AttEstab.AMR) x 100%
Formula
Description
This KPI is used to check the RAB setup success ratio of CS 64 Kbit/s
conversational services in an RNC or a cluster.
VP (Video Phone) RAB Setup Attempt Procedure is complete when the RNC
receives an RAB ASSIGNMENT REQUEST message from the CN (The
RAB type is for the CS 64 Kbit/s conversational service).
VP RAB Setup Success Procedure starts when the UE sends a RADIO
BEARER SETUP COMPLETE message to RNC. This procedure is complete
when the RNC sends an RAB ASSIGNMENT RESPONSE message to the
CN in the CS domain.
Issue 04 (2012-06-25)
Associated
Counters
Object
CELL
Unit/Range
(VS.RAB.SuccEstCS.Conv.64/VS.RAB.AttEstCS.Conv.64) x 100%
14
RAN
KPI Reference
2 Accessibility
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of all CS services in
an RNC or a cluster.
The CS RAB Setup Attempt Procedure is complete when the RNC receives
an RAB ASSIGNMENT REQUEST message from the CN in the CS
domain.The message contains information about one of the following service
types: Conversational Services, streaming Services.
The CS RAB Setup Success Procedure starts when the RNC receives a
RADIO BEARER SETUP COMPLETE message from UE. This procedure
is complete when the RNC sends an RAB ASSIGNMENT RESPONSE
message to the CN in the CS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
15
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of all PS services in
an RNC or a cluster.
The PS RAB Setup Attempt Procedure is complete when the RNC receives
an RAB ASSIGNMENT REQUEST message from the SGSN in the PS
domain, the message contains information about one of the following service
types: Conversational services, Streaming services, Interactive Services,
Background Services.
The PS RAB Setup Success Procedure starts when the RNC receives a
RADIO BEARER SETUP COMPLETE message from the UE. This
procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the SGSN in the PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
Issue 04 (2012-06-25)
16
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of PS services that
are carried by HSDPA in a cluster.
The HSDPA RAB Setup Attempt Procedure is complete when the RNC
receives an RAB ASSIGNMENT REQUEST message from the CN for
setting up the HSDPA service.
The HSDPA RAB Setup Success Procedure starts when the RNC receives a
RADIO BEARER SETUP COMPLETE message from the UE. This
procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the CN.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.HSDPA.RAB.SuccEstab/VS.HSDPA.RAB.AttEstab) x 100%
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the HSUPA service
in an RNC or a cluster.
The HSUPA RAB Setup Success Procedure starts when the RNC receives a
RADIO BEARER SETUP COMPLETE message from the UE. This
procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the CN.
The HSUPA RAB Setup Attempt Procedure is complete when the RNC
receives an RAB ASSIGNMENT REQUEST message from the CN for
setting up the HSUPA service.
Issue 04 (2012-06-25)
17
RAN
KPI Reference
2 Accessibility
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.HSUPA.RAB.SuccEstab/VS.HSUPA.RAB.AttEstab) x 100%
Formula
Description
This KPI is used to check the RAB setup success ratio of the E-FACH service
in an RNC or a cluster.
Successful PS RAB Setup on E-FACH Procedure starts when the RNC
receives a RADIO BEARER SETUP COMPLETE message from the UE.
This procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the SGSN in the PS domain.
The procedure of Attempts of PS RAB Setup on E-FACH is complete when
the RNC receives an RAB ASSIGNMENT REQUEST message from the
SGSN, and the PS service is established on the EFACH.
Associated
Counters
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Issue 04 (2012-06-25)
18
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the RAB setup success ratio of the CS over HSPA
service.
When the RAB is set for the CS conversational service and is carried on an
HSPA channel, the CS over HSPA RAB Setup Success Procedure starts when
the RNC receives an RADIO BEARER SETUP COMPLETE message from
UE. This procedure is complete when the RNC sends an RAB
ASSIGNMENT RESPONSE message to CN.
The CS over HSPA RAB Setup Attempt Procedure is complete when the
RNC receives an RAB ASSIGNMENT REQUEST message from the CN,
and the RAB is set up on an HSPA channel.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the HSDPA
64QAM service in an RNC or a cluster.
The HSDPA 64 QAM RAB Setup Success Procedure starts when the RNC
receives an RADIO BEARER SETUP COMPLETE message from the UE.
This procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the CN.
The HSDPA 64QAM RAB Setup Attempt Procedure is complete when the
RNC receives an RAB ASSIGNMENT REQUEST message from the CN for
setting up the HSDPA service using 64QAM.
Issue 04 (2012-06-25)
19
RAN
KPI Reference
2 Accessibility
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the HSDPA MIMO
service in an RNC or a cluster.
The HSDPA MIMO RAB Setup Success procedure starts when the RNC
receives a RADIO BEARER SETUP COMPLETE message from the UE.
This procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the CN.
The HSDPA MIMO RAB Setup Attempt procedure is complete when the
RNC receives an RAB ASSIGNMENT REQUEST message from the CN for
setting up the HSDPA service using MIMO.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.HSDPA.RAB.MIMO.SuccEstab/VS.HSDPA.RAB.MIMO.AttEstab) x 100%
20
RAN
KPI Reference
2 Accessibility
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the HSDPA DC
RAB service in an RNC or a cluster.
The HSDPA DC RAB Setup Success procedure starts when the RNC receives
a RADIO BEARER SETUP COMPLETE message from the UE. This
procedure is complete when the RNC sends an RAB ASSIGNMENT
RESPONSE message to the CN.
The HSDPA DC RAB Setup Attempt procedure is complete when the RNC
receives from the CN an RAB ASSIGNMENT REQUEST message for
setting up the HSDPA service using DC-HSDPA.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.HSDPA.RAB.DC.SuccEstab/VS.HSDPA.RAB.DC.AttEstab) x
100%
Formula
Description
This KPI is used to check the RAB Setup Success Ratio of the HSDPA MIMO
64QAM service in an RNC or a cluster.
The HSDPA MIMO 64QAM RAB Setup Success procedure starts when the
RNC receives a RADIO BEARER SETUP COMPLETE message from the
UE. This procedure is complete when the RNC sends an RAB
ASSIGNMENT RESPONSE message to the CN.
The HSDPA MIMO 64QAM RAB Setup Attempt procedure is complete
when the RNC receives an RAB ASSIGNMENT REQUEST message from
the CN for setting up the HSDPA service using MIMO+64QAM.
Associated
Counters
Issue 04 (2012-06-25)
21
RAN
KPI Reference
2 Accessibility
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
Formula
Description
This KPI is used to check the Channel Setup Success Rate of MBMS service
in PTM mode.
When the RB of PTM MBMS service is successfully set up, the PTM Channel
RB is successfully set up.
When the RNC initiates the setup of PTM MBMS service, the PTM Channel
RB Setup Attempt.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.MBMS.RB.PTM.SuccEstab/VS.MBMS.RB.PTM.AttEstab) x
100%
Formula
Issue 04 (2012-06-25)
22
RAN
KPI Reference
2 Accessibility
Description
This KPI is used to check the Channel Setup Success Rate of MBMS service
in PTP mode.
The PTP Channel RB Setup Success Procedure is as follows:
When the UE initiates a request to set up an MBMS, the RNC, in response to
the UE's request, initiates PTP RB setup, and the PTP RB is successfully set
up.
The PTP Channel RB Setup Attempt Procedure:
The RNC initiates PTP RB setup after the UE initiates an MBMS setup
request.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
(VS.MBMS.RB.PTP.SuccEstab/VS.MBMS.RB.PTP.AttEstab) x 100%
Formula
Description
Associated
Counters
Issue 04 (2012-06-25)
23
RAN
KPI Reference
2 Accessibility
Object
CELL
Unit/Range
Note
None
Formula
Description
Associated
Counters
Issue 04 (2012-06-25)
Object
CELL
Unit/Range
Note
None
24
RAN
KPI Reference
2 Accessibility
Formula
Description
Associated
Counters
Issue 04 (2012-06-25)
Object
CELL
Unit/Range
Note
None
25
RAN
KPI Reference
3 Availability
Availability
26
RAN
KPI Reference
3 Availability
Issue 04 (2012-06-25)
27
RAN
KPI Reference
3 Availability
Formula
Description
This KPI is used to check the Availability of the cells with poor call drop ratio
or call setup success ratio in an RNC or a cluster.
Description of the numerator:
The number of Cells in which AMR RAB Setup Success Ratio <95% and VP
RAB Setup Ratio <= 95%, or AMR Call Drop Ratio >3% and VP Call Drop
Ratio >3%.
Associated
Counters
Object
CELL
Unit/Range
Note
95% and 3% are the values obtained based on the references from the
commercial network with the condition of that the traffic of AMR voice and
video call is greater than 0.1 Erlang.
Issue 04 (2012-06-25)
28
RAN
KPI Reference
3 Availability
Formula
Description
Associated
Counters
Object
RNC, CELL
Unit/Range
Note
None
Issue 04 (2012-06-25)
29
RAN
KPI Reference
3 Availability
Formula
Description
This KPI is used to check the admission refused ratio of new calls during busy
hours in an RNC or a cluster.
l Description of the numerator:
The failed number of Cell Resource Requests for New Call setup is
counted after RNC requesting cell resources for the UE successfully.
l Description of the denominator:
The number of Cell Resource Requests during RAB establishment for
Cell. After RNC receiving the RAB ASSIGNMENT REQUEST message
from CN, the RNC requests cell resources for the UE and the counter is
pegged in the cell where the UE camps on.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI is calculated by aggregating all the cell counters.
[1-VS.RAC.NewCallAcc/VS.RAC.NewCallReq] x 100%
Formula
Description
This KPI is used to check the utility ratio of radio network resources during
busy hours in an RNC or a cluster. It is the rate of congested cell during the
busy hour to total number of cells in RNC.
Description of the numerator:
The number of congested cells counted after RNC receiving the COMMON
MESUREMENT REPORT message from NodeB. The RNC measures when
overload congestion occurs at UL or DL.
Issue 04 (2012-06-25)
30
RAN
KPI Reference
3 Availability
Associated
Counters
Object
CELL
Unit/Range
Note
The number of congested cells is calculated by aggregating the cells that are
congested in DL or UL directions during busy hours.
Formula
Description
This KPI describes the ratio of cell unavailable duration to the number of cells
in RNC during busy hours. It is used to check the impact of the degrading of
the network performance caused by the unavailable cells during busy hours
in an RNC.
Description of the numerator:
The cell unavailable time is started to count when the cell is out of service,
or the channel is barred through the LMT in a measurement period, or problem
of CCH such as failed synchronization, or equipment faults.
Associated
Counters
Object
CELL
Unit/Range
Note
31
RAN
KPI Reference
3 Availability
Formula
Average CPU Load = XPU usage of the XPU in the measurement period
Description
This KPI provides the CPU usage of the XPU in a measurement period. It
also indicates the load and operating performance of CPU on the XPU in the
measurement period.
The CPU usage of the XPU is accumulated every second in the measurement
period.
Associated
Counters
Object
XPU
Unit/Range
Note
Formula
Description
Issue 04 (2012-06-25)
32
RAN
KPI Reference
3 Availability
Associated
Counters
Object
NodeB
Unit/Range
Note
Formula
Description
Issue 04 (2012-06-25)
33
RAN
KPI Reference
3 Availability
Associated
Counters
Object
NodeB
Unit/Range
Note
Issue 04 (2012-06-25)
Name
Description
This KPI is used to check the total duration of the unavailability of a cell
caused by system fault in a measurement period.
Associated
Counters
VS.Cell.UnavailTime.Sys
Object
CELL
Unit/Range
s
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
34
RAN
KPI Reference
3 Availability
Note
None
Description
This KPI is used to check the total duration of unavailability of the HSDPA
service in a cell,caused by system fault in a measurement period.
Associated
Counters
VS.Cell.HSDPA.UnavailTime
Object
CELL
Unit/Range
Note
None
Description
This KPI is used to check the total duration of unavailability of the HSUPA
service in a cell,caused by system fault in a measurement period.
Associated
Counters
VS.Cell.HSUPA.UnavailTime
Object
CELL
Unit/Range
Note
None
Issue 04 (2012-06-25)
35
RAN
KPI Reference
3 Availability
Description
The resources for license groups are measured based on the usage of CEs in
each license group. This measurement indicates the consumption of baseband
resources in the NodeB.
The corresponding counters listed below give the Average/Maximum number
of UL/DL and HSUPA CEs consumption for an operator.
Associated
Counters
VS.ULCE.Mean.Shared
VS.ULCE.Max.Shared
VS.DLCE.Mean.Shared
VS.DLCE.Max.Shared
VS.ULCE.Mean.Dedicated
VS.ULCE.Max.Dedicated
VS.DLCE.Mean.Dedicated
VS.DLCE.Max.Dedicated
Object
NodeB CELL
Unit/Range
Numbers
Note
If only one Operator is available on the NodeB, the Dedicated Counter value
is always Zero and the Shared CE counters should be used to check actual
consumption of the Cell in NodeB.
Description
Associated
Counters
VS.HW.ULCreditAvailable
Object
NodeB
Unit/Range
Numbers
Note
None
VS.HW.DLCreditAvailable
36
RAN
KPI Reference
3 Availability
Description
Associated
Counters
VS.LC.ULCreditAvailable.Shared
Object
NodeB
Unit/Range
Numbers
Note
If only one operator is available on the NodeB, the configured counters given
above should be used to evaluate the total configured License CE in the
NodeB.
VS.LC.DLCreditAvailable.Shared
Description
Associated
Counters
VS.LC.ULMean.LicenseGroup.Shared
VS.LC.ULMax.LicenseGroup.Shared
VS.LC.ULMin.LicenseGroup.Shared
VS.HSUPA.LC.ULMean.LicenseGroup.Shared
VS.HSUPA.LC.ULMax.LicenseGroup.Shared
VS.HSUPA.LC.ULMin.LicenseGroup.Shared
VS.LC.DLMean.LicenseGroup.Shared
VS.LC.DLMax.LicenseGroup.Shared
VS.LC.DLMin.LicenseGroup.Shared
Object
NodeB
Unit/Range
Numbers
Note
If only one operator is available on the NodeB, the shared counters given
above should be used to evaluate the total License CE Consumption in the
NodeB.
Issue 04 (2012-06-25)
37
RAN
KPI Reference
3 Availability
Description
Associated
Counters
VS.LC.DLCreditAvailable.LicenseGroup.Dedicated
Object
NodeB
Unit/Range
Numbers
Note
If only one operator is available on the NodeB, the configured counter value
given above is Zero.
VS.LC.ULCreditAvailable.LicenseGroup.Dedicated
Description
Associated
Counters
l UL Statistics
VS.LC.ULMean.LicenseGroup
VS.LC.ULMax.LicenseGroup
VS.LC.ULMin.LicenseGroup
VS.HSUPA.LC.ULMin.LicenseGroup
VS.HSUPA.LC.ULMean.LicenseGroup
VS.HSUPA.LC.ULMax.LicenseGroup
l DL Statistics
VS.LC.DLMean.LicenseGroup
VS.LC.DLMax.LicenseGroup
VS.LC.DLMin.LicenseGroup
Object
NodeB
Unit/Range
Numbers
Note
If only one operator is available on the NodeB, the counter value given above
is Zero.
38
RAN
KPI Reference
3 Availability
Description
The first 3 counters given below provide the RTWP measurement values of
a cell in the RNC, Mean/Maximum/Minimum Power of Totally Received
Bandwidth for Cell. The last 3 counters provide average, maximum and
minimum received scheduled E-DCH power shared in the measurement
period for cell.
Associated
Counters
VS.MaxRTWP
VS.MinRTWP
VS.MeanRTWP
VS.HSUPA.MeanRSEPS
VS.HSUPA.MaxRSEPS
VS.HSUPA.MinRSEPS
Object
CELL
Unit/Range
dBm; %
Note
None
Description
Associated
Counters
VS.MaxTCP
VS.MinTCP
VS.MeanTCP
VS.MaxTCP.NonHS
VS.MinTCP.NonHS
VS.MeanTCP.NonHS
VS.HSDPA.MaxRequiredPwr
VS.HSDPA.MinRequiredPwr
VS.HSDPA.MeanRequiredPwr
Issue 04 (2012-06-25)
39
RAN
KPI Reference
3 Availability
Object
CELL
Unit/Range
dBm
Note
None
Formula
Description
The occupied codes are the codes occupied by the common channel and R99
user. The code number is normalized to SF = 256, that is, converted to the
code number when SF = 256.
The counters given below provide the number of single-RAB and Multi-RAB
UEs that occupy the DL R99 codes with Spreading Factor (SF) of
4/8/16/32/64/128/256.
Associated
Counters
Object
CELL
Unit/Range
Note
Issue 04 (2012-06-25)
40
RAN
KPI Reference
4 Coverage
Coverage
Issue 04 (2012-06-25)
41
RAN
KPI Reference
4 Coverage
Formula
Description
Associated
Counters
Object
RNC
Unit/Range
Note
-98 dBm is the value obtained based on the references from the commercial
network.
Issue 04 (2012-06-25)
42
RAN
KPI Reference
4 Coverage
Formula
This KPI is used to check the consumption of network resources due to soft
handover in an RNC or a Cell. It considered the radio link quantity during the
soft handover.
In the RNC Soft handover ratio, count the mean number of UEs with different
quantity of radio links for RNC from A1 to F1. The RNC periodically samples
of the number of UEs with corresponding radio links in a measurement period.
At the end of the measurement period, the RNC divides the accumulated
number by the sampling times to obtain the soft handover overhead.
The Cell level KPI is only available for cells in a cluster. From A1 to F1 count
the mean number of UEs with different quantity of Radio Links(1~6 radio
links) in the Cell of the active set.
Issue 04 (2012-06-25)
43
RAN
KPI Reference
4 Coverage
Associated
Counters
Issue 04 (2012-06-25)
Object
RNC, CELL
Unit/Range
Note
None
44
RAN
KPI Reference
5 Mobility
Mobility
45
RAN
KPI Reference
5 Mobility
Issue 04 (2012-06-25)
46
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the soft handover success ratio in an RNC or in a
Cluster, including softer handover.
l The Successful Soft Handover (including softer handovers) procedure is
complete when the RNC receives an ACTIVE SET UPDATE
COMPLETE message from the UE during the soft handover (including
the softer handover) procedure.
l The attempt procedure is complete when the RNC sends an ACTIVE SET
UPDATE message to the UE.
Associated
Counters
Object
RNC, CELL
Unit/Range
Note
None
Formula
Issue 04 (2012-06-25)
47
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the softer handover success ratio in an RNC or a
Cluster, including softer handover.
l The Successful Softer Handover procedure is complete when the RNC
receives an ACTIVE SET UPDATE COMPLETE message from the UE
during the softer handover procedure.
l The attempt procedure is complete when the RNC sends an ACTIVE SET
UPDATE message to the UE.
Associated
Counters
Object
RNC, CELL
Unit/Range
Note
None
Formula
Description
This KPI is used to check the AMR Soft Handover Success ratio in an RNC
or a Cluster, including softer handover.
The Successful AMR Soft Handover procedure is complete when the RNC
receives an ACTIVE SET UPDATE COMPLETE message from the UE
during the soft handover procedure.
The attempt procedure is complete when the RNC sends an ACTIVE SET
UPDATE message to the UE.
Issue 04 (2012-06-25)
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI can be approximately calculated by accumulating all cell
counters within the RNC.
[(VS.SHO.AMR.Succ)/(VS.SHO.AMR.Att)] x 100%
48
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the CS64 Soft Handover Success ratio in an RNC
or a Cluster, including softer handover.
The Successful CS64 Soft Handover procedure is complete when the RNC
receives an ACTIVE SET UPDATE COMPLETE message from the UE
during the soft handover procedure.
The attempt procedure is complete when the RNC sends an ACTIVE SET
UPDATE message to the UE.
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI can be approximately calculated by accumulating all cell
counters within the RNC.
[(VS.SHO.CS64.Succ)/(VS.SHO.CS64.Att)] x 100%
Formula
Description
This KPI is used to check the PS Soft Handover Success ratio in an RNC or
a Cluster, including softer handover.
The Successful PS Soft Handover procedure is complete when the RNC
receives an ACTIVE SET UPDATE COMPLETE message from the UE
during the soft handover procedure.
The attempt procedure is complete when the RNC sends an ACTIVE SET
UPDATE message to the UE.
Issue 04 (2012-06-25)
49
RAN
KPI Reference
5 Mobility
Associated
Counters
Object
CELL
Unit/Range
Note
The RNC level KPI can be approximately calculated by accumulating all cell
counters within the RNC.
[(VS.SHO.PS.Succ)/(VS.SHO.PS.Att)] x 100%
Formula
Description
This KPI is used to check the intra-frequency hard handover success ratio in
an RNC.
The Intra-frequency Hard Handover Success procedure is complete when the
RNC receives the PHYSICAL CHANNEL RECONFIGURATION
COMPLETE (for example) message from the UE.
The Intra-frequency Hard Handover Attempt procedure is complete when
RNC sends the PHYSICAL CHANNEL RECONFIGURATION message to
the UE.
Associated
Counters
Issue 04 (2012-06-25)
Object
RNC, CELL
Unit/Range
Note
None
50
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the inter-frequency hard handover success ratio in
an RNC.
The Inter-frequency Hard Handover Success procedure is complete when
RNC received a PHYSICAL CHANNEL RECONFIGURATION
COMPLETE message from the UE.
The Inter-frequency Hard Handover attempts procedure starts when RNC
sends a PHYSICAL CHANNEL RECONFIGURATION message to the UE.
In this case the RNC measures the counter.
Associated
Counters
Object
RNC, CELL
Unit/Range
Note
None
Formula
Issue 04 (2012-06-25)
51
RAN
KPI Reference
5 Mobility
Description
l The HS-DSCH service cell change success with SHO is triggered with
the following messages:
PHYSICAL CHANNEL RECONFIGURATION
TRANSPORT CHANNEL RECONFIGURATION
RADIO BEARER RECONFIGURATION
ACTIVE SET UPDATE
l Accordingly, the UE sends the following messages to the RNC as a
response.
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
PHYSICAL CHANNEL RECONFIGURATION FAILURE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION FAILURE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION FAILURE
ACTIVE SET UPDATE COMPLETE
ACTIVE SET UPDATE FAILURE Message
Take the PHYSICAL CHANNEL RECONFIGURATION message as an
example. When receiving a PHYSICAL CHANNEL RECONFIGURATION
COMPLETE message from a UE, the RNC measures this item as numerator,
and when sending a PHYSICAL CHANNEL RECONFIGURATION
message to a UE, the RNC measures this item as denominator.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSDPA.SHO.ServCellChg.SuccOut/
VS.HSDPA.SHO.ServCellChg.AttOut) x 100%
Formula
Issue 04 (2012-06-25)
52
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the intra-frequency hard handover success ratio of
HSDPA service in an RNC or a cluster.
l The HS-DSCH service cell change success with SHO is triggered with
the following message:
PHYSICAL CHANNEL RECONFIGURATION
TRANSPORT CHANNEL RECONFIGURATION
RADIO BEARER RECONFIGURATION
l Accordingly, the UE sends the following messages to the RNC as a
response.
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
PHYSICAL CHANNEL RECONFIGURATION FAILURE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION FAILURE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION FAILURE
RADIO BEARER SETUP COMPLETE
RADIO BEARER SETUP FAILURE
RADIO BEARER RELEASE COMPLETE
RADIO BEARER RELEASE FAILURE
Take the PHYSICAL CHANNEL RECONFIGURATION message as an
example, when receiving a PHYSICAL CHANNEL RECONFIGURATION
COMPLETE message from a UE , the RNC measures this item in the best
cell from which the UE is handed over if an intra-frequency HSDPA hard
handover without channel change is performed.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSDPA.HHO.H2H.SuccOutIntraFreq/VS.HSDPA.HHO.H2H.AttOutIntraFreq) x 100%
Formula
Issue 04 (2012-06-25)
53
RAN
KPI Reference
5 Mobility
Description
Associated
Counters
Object
CELL
Unit/Range
Note
None
Formula
Issue 04 (2012-06-25)
54
RAN
KPI Reference
5 Mobility
Description
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSDPA.HHO.H2D.SuccOutInterFreq/VS.HSDPA.HHO.H2D.AttOutInterFreq) x 100%
Formula
Issue 04 (2012-06-25)
55
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the channel switch success ratio when UE switches
from HSDPA to DCH in an RNC or a cluster.
The number of successful HS-DSCH to DCH channel switch measures when
RNC receives a RAIDO BEARER RECONFIGURATION COMPLETE
message from the UE indicating the channel reconfiguration for HSDPA
service in the DCCC or RAB MODIFY procedure. The RNC measures the
item in the HSDPA serving cell.
The attempt number of H2D channel handover counts when RNC decides to
perform a channel handover, which sends a RADIO BEARER
RECONFIGURATION message to a UE during the DCCC or RAB MODIFY
procedure. In this case, the RNC measures the item in the serving cell of the
HSDPA service according to the transport channels of UEs before and after
the reconfiguration.
The RNC performs the transport channel Switch in the same cell.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSDPA.H2D.Succ/VS.HSDPA.H2D.Att) x 100%
Formula
Issue 04 (2012-06-25)
56
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the channel switch success ratio when the UE
switches from DCH to HSDPA in an RNC or a cluster.
The number of successful DCH to HS-DSCH channel switch measures when
RNC receives from the UE a RAIDO BEARER RECONFIGURATION
COMPLETE message indicating the channel reconfiguration for HSDPA
service in the DCCC or RAB MODIFY procedure. The RNC measures the
item in the HSDPA serving cell.
The attempt number of D2H channel switch counts when RNC decides to
perform a channel switch, which sends a RADIO BEARER
RECONFIGURATION message to a UE during the DCCC or RAB MODIFY
procedure. In this case, the RNC measures the item in the serving cell of the
HSDPA service according to the transport channels of UEs before and after
the reconfiguration.
The RNC performs the transport channel switch in the same cell.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSDPA.D2H.Succ/VS.HSDPA.D2H.Att) x 100%
Formula
Description
Issue 04 (2012-06-25)
57
RAN
KPI Reference
5 Mobility
Associated
Counters
Object
RNC, CELL
Unit/Range
Note
None
Formula
Description
Associated
Counters
Issue 04 (2012-06-25)
Object
RNC, CELL
Unit/Range
Note
None
58
RAN
KPI Reference
5 Mobility
Formula
Description
Associated
Counters
Object
CELL
Unit/Range
Note
Formula
Issue 04 (2012-06-25)
59
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the PS outgoing inter-RAT handover for HSDPA
services initiated by the RNC in the best cell that the UE camps on before the
handover.
The HSDPA Inter-RAT HO successes procedure is complete when the RNC
receives the IU RELEASE COMMAND message. The message contains one
of the following information: "Successful Relocation", "Normal Release",
"Network Optimization" during the PS outgoing inter-RAT handover for
HSDPA services.
The HSDPA Inter-RAT HO attempts procedure starts when the RNC sends
the CELL CHANGE ORDER FROM UTRAN message during the PS
outgoing inter-RAT handover for HSDPA services, the counter is measured
in the best cell that the UE camps on.
Associated
Counters
Object
CELL
Unit/Range
Note
Formula
Description
This KPI is used to check the relocation executions (UE involved and UE not
involved) initiated by SRNC according to different CN domains.
The SRNC Relocation Success procedure is complete when the SRNC
receives an IU RELEASE COMMAND message. The message contains one
of the following information: "Successful Relocation", "Normal Release",
"Network Optimization". In this case, the SRNC measures the related counter
according to the CN domain.
The SRNC Relocation Attempts procedure starts when the SRNC receives a
RELOCATION COMMAND message from the CN in the CS domain. In this
case, the SRNC measures the related counter according to different relocation
types (CS, PS, UE involved, UE not involved).
Issue 04 (2012-06-25)
60
RAN
KPI Reference
5 Mobility
Associated
Counters
Object
RNC
Unit/Range
Note
None
Formula
Description
This KPI is used to check the TRNC relocation executions (UE involved and
UE not involved) initiated by SRNC according to different CN domains.
The TRNC Relocation Success procedure is complete when the TRNC
relocation is complete, and when the TRNC sends a RELOCATION
COMPLETE message to the CN. In this case, the TRNC measures the related
counters according to different relocation types. If the UE connects to both
the CS domain and the PS domain at the same time, the related counters are
increased by one each time the TRNC sends a RELOCATION COMPLETE
message to the CNs in the CS domain and PS domain.
When the resource allocation for TRNC relocation is complete, the TRNC
sends a RELOCATION REQUEST ACKNOWLEDGE message to the CN
in the CS or the PS domain. In this case, the TRNC measures the related
counter according to different relocation types.
Issue 04 (2012-06-25)
61
RAN
KPI Reference
5 Mobility
Associated
Counters
Object
RNC
Unit/Range
Note
None
Formula
Description
This KPI is used to check EDCH RL additions and deletions due to soft
handover in a cell.
The E-DCH soft Handover Success procedure is complete when the RNC
receives an ACTIVE SET UPDATE COMPLETE message from the UE.An
EDCH link is added or deleted during the soft handover.
The E-DCH soft Handover attempts procedure starts when the RNC sends an
ACTIVE SET UPDATE message to the UE and there is EDCH RL to be
deleted or added during the soft handover.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSUPA.SHO.SuccOut/VS.HSUPA.SHO.AttOut) x 100%
Issue 04 (2012-06-25)
62
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the success ratio of HSUPA serving cell changes
in soft handover status for cell.
Description of the numerator:
l The successful HSUPA serving cell changes in soft handover status for
cell, this procedure can be triggered with the following messages:
PHYSICAL CHANNEL RECONFIGURATION
TRANSPORT CHANNEL RECONFIGURATION
RADIO BEARER RECONFIGURATION
l Accordingly, the UE sends the following messaged to the RNC as a
response:
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
PHYSICAL CHANNEL RECONFIGURATION FAILURE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION FAILURE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION FAILURE
l Take the PHYSICAL CHANNEL RECONFIGURATION message as an
example, when the RNC receives a PHYSICAL CHANNEL
RECONFIGURATION COMPLETE message from the UE, the RNC
measures this item in the original HSUPA serving cell if the HSUPA
serving cell is changed. The item is used to indicate the change of HSUPA
serving cells in the soft handover state instead of the hard handover state.
Description of the denominator:
l Take the PHYSICAL CHANNEL RECONFIGURATION message as an
example, when the RNC sends a PHY CHANNEL
RECONFIGURATION message to the UE. The RNC measures this item
in the original HSUPA serving cell if the HSUPA serving cell is changed.
This item is used to indicate the change of HSUPA serving cells in the
soft handover status instead of the hard handover status.
Issue 04 (2012-06-25)
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSUPA.SHO.ServCellChg.SuccOut/
VS.HSUPA.SHO.ServCellChg.AttOut) x 100%
63
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the E-DCH service cell change success ratio with
the Inter-HHO procedure in an RNC or a cluster.
Description of the numerator:
l When the RNC receives one of the following messages from the UE, the
RNC measures this item in the HSUPA serving cell before the hard
handover if an EDCH-to-EDCH inter-frequency hard handover is
performed.
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER SETUP COMPLETE
RADIO BEARER RELEASE COMPLETE
Description of the denominator:
l When the RNC sends the following messages to the UE, the RNC
measures the item in the HSUPA serving cell before the hard handover if
an EDCH-to-EDCH inter-frequency hard handover is performed.
PHYSICAL CHANNEL RECONFIGRATION
TRANSPORT CHANNEL RECONFIGRATION
RADIO BEARER RECONFIGRATION
RADIO BEARER SETUP
RADIO BEARER RELEASE
Issue 04 (2012-06-25)
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSUPA.HHO.E2E.SuccOutInterFreq/VS.HSUPA.HHO.E2E.AttOutInterFreq) x 100%
64
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the channel switch success ratio when there is UE
handover from E-DCH to DCH in the same cell.
The Switch Channel Type from EDCH to DCH successful attempts procedure
is complete when the RNC receives an RB RECFG CMP message from the
UE during the DCCC or RAB ASSIGN procedure. If the UE camps on the
same cell after reconfigurations, the RNC measures the items in the HSUPA
serving cell by the channel switch type.
The Switch Channel Type from EDCH to DCH attempts procedure starts
when the RNC sends a RADIO BEAR RECONFIGURE message to the UE
during the DCCC or RAB ASSIGN procedure. If the UE camps on the same
cell after reconfigurations, the RNC measures the items in the HSUPA serving
cell by the channel switch type.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSUPA.E2D.Succ/VS.HSUPA.E2D.Att) x 100%
Formula
Issue 04 (2012-06-25)
65
RAN
KPI Reference
5 Mobility
Description
This KPI is used to check the channel switch success ratio when there is UE
handover from E-DCH to DCH in the same cell.
The Switch Channel Type from DCH to EDCH successful attempts procedure
is complete when the RNC receives an RB RECFG CMP message from the
UE during the DCCC or RAB ASSIGN procedure. If the UE camps on the
same cell after reconfigurations, the RNC measures the items in the HSUPA
serving cell by the channel switch type.
The Switch Channel Type from DCH to EDCH attempts procedure starts
when the RNC sends a RADIO BEAR RECONFIGURE message to the UE
during the DCCC or RAB ASSIGN procedure. If the UE camps on the same
cell after reconfigurations, the RNC measures the items in the HSUPA serving
cell by the channel switch type.
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.HSUPA.D2E.Succ/VS.HSUPA.D2E.Att) x 100%
Formula
Description
This KPI is used to check the success ratio of HSUPA Inter-Frequency Hard
Handover from EDCH to DCH in a cell.
The Switch Channel Type from EDCH to DCH successful attempts procedure
is complete when the RNC receives a RADIO BEARER
RECONFIGURATION COMPLETE message from the UE. The RNC
measures this item in the HSUPA serving cell before the hard handover if an
EDCH-to-DCH inter-frequency hard handover is performed.
The Switch Channel Type from EDCH to DCH attempts procedure starts
when the RNC sends a RADIO BEARER RECONFIGURATION message
to the UE. The RNC measures this item in the HSUPA serving cell before the
hard handover if an EDCH-to-DCH inter-frequency hard handover is
performed.
Associated
Counters
Issue 04 (2012-06-25)
66
RAN
KPI Reference
5 Mobility
Object
CELL
Unit/Range
Note
None
Formula
Description
This KPI is used to check the HSUPA service Inter-RAT handover success
ratio from WCDMA to GPRS in the best cell that the UE camps on.
The HSUPA W2G Inter-RAT Handover Out success procedure is complete
when the RNC receives an IU RELEASE COMMAND message. The
message contains one of the following information: "Successful Relocation",
"Normal Release", "Network Optimization" and sends an IU RELEASE
COMPLETE message during the PS outgoing inter-RAT handover for
HSUPA services. In this case, the PS outgoing handover succeeds and this
counter is measured in the best cell that the UE camps on before the handover.
The HSUPA W2G Inter-RAT Handover Out attempts procedure starts when
the RNC sends a CELL CHANGE ORDER FROM UTRAN message to the
UE during the PS outgoing inter-RAT handover for HSUPA services. In this
case, this counter is measured in the best cell that the UE camps on.
Associated
Counters
Object
CELL
Unit/Range
Note
None
Issue 04 (2012-06-25)
67
RAN
KPI Reference
5 Mobility
Formula
Description
This KPI is used to check the MBMS service mode switch success ratio from
PTP to PTM.
The MBMS Service Mode Switch Success procedure is complete after a
MBMS service is switched from PTP mode to PTM mode and a PTM MBMS
RB is successfully set up.
The MBMS Service Mode Switch attempts procedure starts after the initiation
of transition from PTP mode to PTM mode.
Issue 04 (2012-06-25)
Associated
Counters
Object
CELL
Unit/Range
Note
None
(VS.MBMS.PTPtoPTM.Succ/VS.MBMS.PTPtoPTM.Att) x 100%
68
RAN
KPI Reference
6 Retainability
Retainability
Issue 04 (2012-06-25)
69
RAN
KPI Reference
6 Retainability
Formula
Description
This KPI provides the ratio of the CS RAB abnormal Releases to the total CS
RAB Releases (Normal Release + Abnormal Release). This KPI is used to
check the retainabililty of CS Service within the UTRAN (RNC or Cluster).
Description of RAB abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exceptions. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with the
causes other than "User Inactivity", "Normal Release", "Successful
Relocation", "Network Optimization", the RNC measures the items
according to the service types in the best cell that the UE camps on if the
released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
Formula
Issue 04 (2012-06-25)
70
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of AMR RAB abnormal Releases to the total
AMR RAB Releases (Normal Release + Abnormal Release) and is used to
check the retainabililty of AMR Service within the UTRAN (RNC or Cluster).
Description of RAB abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CNdue to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following messages: "User Inactivity","Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
The RNC level KPIs are calculated by aggregating all the Cell and Iur
counters in SRNC.
Formula
Issue 04 (2012-06-25)
71
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of the VP (Video Phone) RAB abnormal Releases
to the total VP RAB Releases (Normal Release + Abnormal Release) and is
used to check the retainabililty of VP Service of the UTRAN (RNC or
Cluster).
Description of RAB abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity","Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
Formula
Issue 04 (2012-06-25)
72
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of the AMR Service Erlang to the AMR RAB
Abnormal Releases, which indicates the AMR average Erlang per AMR call
drop within the UTRAN (RNC or Cluster).
Description of the AMR RB counters in the numerator:
Average number of AMR users with different DL rates during the
measurement period.
Description of RAB abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Issue 04 (2012-06-25)
Object
CELL, RNC
Unit/Range
The unit of the numerator is Erlang; {SP} is the Statistic Period with the unit
of minute
Note
None
73
RAN
KPI Reference
6 Retainability
Formula
Description
This KPI provides the ratio of the VP (Video Phone) Service Erlang to the
VP RAB Abnormal Releases, which indicates the VP average Erlang per VP
call drop within the UTRAN (RNC or Cluster).
Description of the VS.RB.CS.Conv.DL.64/VS.RB.CS.Conv.DL.64.RNC:
Average number of VP users with different DL rates during the measurement
period.
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception.
If the RNC receives an IU RELEASE COMMAND/RAB ASSIGNMENT
REQUEST message with any one of the following information: "User
Inactivity", "Normal Release", "Successful Relocation", "Network
Optimization", the RNC measures the items according to the service types in
the best cell that the UE camps on if the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
The unit of the numerator is Erlang; {SP} is the Statistic Period with the unit
of minute
Note
None
Formula
Issue 04 (2012-06-25)
74
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of the PS RAB abnormal Releases to the total PS
RAB Releases (Normal Release + Abnormal Release) and is used to check
the retainabililty of PS Service within the UTRAN (RNC or Cluster).
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
None
Formula
Description
Compared with PS Call Drop Ratio, these KPIs take the PCH state into
account.
Since more and more smart phones camp on and keep Always Online in the
network, if the PCH transition is switched on while no data transferring for
a period, these UEs usually transfer from connected state into Cell PCH state
instead of Idle state, that is, the occasion of RAB normal release for
transferring into IDLE state will greatly decrease than that in the conditions
without PCH transition.
From user's point of view, the occasion of a UE transferring into PCH state
should be considered as a normal RAB release for calculating the formula of
PS Call Drop Ratio.
Issue 04 (2012-06-25)
75
RAN
KPI Reference
6 Retainability
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
76
RAN
KPI Reference
6 Retainability
Formula
Description
This KPI provides the ratio of the PS R99 RAB abnormal Releases to the total
PS R99RAB Releases (Normal Release + Abnormal Release) and is used to
check the retainabililty of PS R99 Service within the UTRAN (RNC or
Cluster).
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL
Unit/Range
Note
RNC level KPI can be calculated approximately by aggregating all the cell
level counters in SRNC, due to the counters are counted in the best cell of
active set. If the best cell for the PS R99 RAB Establishment is located in
DRNC through Iur interface, no counters for the scenario exists in SRNC.
(VS.RAB.AbnormRel.PSR99)/(VS.RAB.AbnormRel.PSR99
+VS.RAB.NormRel.PSR99) x 100%
Formula
Description
Issue 04 (2012-06-25)
Compared with PS R99 Call Drop Ratio, this KPI takes the PCH state into
account.
77
RAN
KPI Reference
6 Retainability
Associated
Counters
Object
CELL
Unit/Range
Note
The occasion of a UE transferring out of PS R99 state (F2H, F2P, D2H) should
be considered as a normal RAB release for calculating the formula of PS R99
Call Drop Ratio.
RNC level KPI can be calculated approximately by aggregating all the cell
level counters in SRNC. Due to the counters are counted in the best cell of
active set, If the best cell for the PS R99 RAB Establishment located in DRNC
via Iur interface, this scenario is not taken into account in the formula.
VS.RAB.AbnormRel.PSR99 and VS.RAB.NormRel.PSR99 have already
taken PCH into account, the occasion of the RAB Normal/Abnormal Release
(VS.RAB.AbnormRel.PS.PCH and VS.RAB.NormRel.PS.PCH) should
be excluded off the Denominator.
Formula
Issue 04 (2012-06-25)
78
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of the PS BE RAB abnormal Releases to the total
PS BE RAB Releases (Normal Release + Abnormal Release) and is used to
check the retainabililty of PS BE Service of the UTRAN (RNC or Cluster).
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
RNC level KPI can be calculated approximately by aggregating all the Cell
and Iur level counters in SRNC.
Formula
Issue 04 (2012-06-25)
79
RAN
KPI Reference
6 Retainability
Description
This KPI provides the ratio of the HSDPA RAB abnormal Releases to the
total HSDPARAB Releases (Normal Release+ Abnormal Release) and is
used to check the retainabililty of HSDPA Service within the UTRAN (RNC
or Cluster).
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
RNC level KPI is calculated approximately by aggregating all the Cell and
Iur level counters in SRNC.
The successful channel transition is considered as normal HS-DSCH release
(Including the transitions due to mobility).
80
RAN
KPI Reference
6 Retainability
Formula
Description
Compared with HSDPA Call Drop Ratio, this KPI takes the PCH state into
account.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
81
RAN
KPI Reference
6 Retainability
Formula
Description
This KPI provides the ratio of the HSUPA RAB abnormal Releases to the
total HSUPARAB Releases (Normal Release + Abnormal Release) and is
used to check the retainabililty of HSUPA Service of the UTRAN (RNC or
Cluster).
Description of RAB Abnormal Release:
The RNC initially sends an IU RELEASE REQUEST/RAB RELEASE
REQUEST message to the CN due to exception. If the RNC receives an IU
RELEASE COMMAND/RAB ASSIGNMENT REQUEST message with
any one of the following information: "User Inactivity", "Normal Release",
"Successful Relocation", "Network Optimization", the RNC measures the
items according to the service types in the best cell that the UE camps on if
the released RABs belong to PS domain.
Associated
Counters
Object
CELL, RNC
Unit/Range
Note
RNC level KPI is calculated approximately by aggregating all the Cell and
Iur level counters in SRNC.
The successful channel transition is considered as normal E-DCH release
(Including the transitions due to mobility).
Issue 04 (2012-06-25)
82
RAN
KPI Reference
6 Retainability
Formula
Description
Compared with HSUPA Call Drop Ratio, this KPI takes the PCH state into
account.
Associated
Counters
Issue 04 (2012-06-25)
Object
CELL, RNC
Unit/Range
Note
83
RAN
KPI Reference
6 Retainability
Formula
Associated
Counters
Issue 04 (2012-06-25)
Object
CELL
Unit/Range
Note
The RNC level KPIs are calculated by aggregating all the cell counters.
84
RAN
KPI Reference
7 Service Integrity
Service Integrity
Issue 04 (2012-06-25)
85
RAN
KPI Reference
7 Service Integrity
Description
These counters provide the average uplink rates of different PS R99 services
in the cells of the active set.
The UL traffic (excluding the RLC header and the retransmitted data, unit:
bit) and the Data transfer duration (unit: ms) of each kind of PS R99 services
are accumulated in the measurement period for the cells that are under the
SRNC. At the end of the measurement period, the RNC divides the total bytes
by the total data transfer time to obtain the Average UL Throughput for each
PS R99 Service.
Associated
Counters
VS.PS.Bkg.Kbps.UL8
VS.PS.Bkg.Kbps.UL16
VS.PS.Bkg.Kbps.UL32
VS.PS.Bkg.Kbps.UL64
VS.PS.Bkg.Kbps.UL128
VS.PS.Bkg.Kbps.UL144
VS.PS.Bkg.Kbps.UL256
VS.PS.Bkg.Kbps.UL384
VS.PS.Int.Kbps.UL8
VS.PS.Int.Kbps.UL16
VS.PS.Int.Kbps.UL32
VS.PS.Int.Kbps.UL64
VS.PS.Int.Kbps.UL128
VS.PS.Int.Kbps.UL144
VS.PS.Int.Kbps.UL256
VS.PS.Int.Kbps.UL384
VS.PS.Str.Kbps.UL8
VS.PS.Str.Kbps.UL16
VS.PS.Str.Kbps.UL32
VS.PS.Str.Kbps.UL64
VS.PS.Str.Kbps.UL128
VS.PS.Conv.Kbps.UL
Issue 04 (2012-06-25)
Object
CELL
Unit/Range
Kbit/s
Note
None
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
86
RAN
KPI Reference
7 Service Integrity
Description
Associated
Counters
VS.PS.Bkg.Kbps.DL8
VS.PS.Bkg.Kbps.DL16
VS.PS.Bkg.Kbps.DL32
VS.PS.Bkg.Kbps.DL64
VS.PS.Bkg.Kbps.DL128
VS.PS.Bkg.Kbps.DL144
VS.PS.Bkg.Kbps.DL256
VS.PS.Bkg.Kbps.DL384
VS.PS.Int.Kbps.DL8
VS.PS.Int.Kbps.DL16
VS.PS.Int.Kbps.DL32
VS.PS.Int.Kbps.DL64
VS.PS.Int.Kbps.DL128
VS.PS.Int.Kbps.DL144
VS.PS.Int.Kbps.DL256
VS.PS.Int.Kbps.DL384
VS.PS.Str.Kbps.DL8
VS.PS.Str.Kbps.DL16
VS.PS.Str.Kbps.DL32
VS.PS.Str.Kbps.DL64
VS.PS.Str.Kbps.DL128
VS.PS.Str.Kbps.DL144
VS.PS.Str.Kbps.DL256
VS.PS.Str.Kbps.DL384
VS.PS.Conv.Kbps.DL
Issue 04 (2012-06-25)
87
RAN
KPI Reference
7 Service Integrity
Object
CELL
Unit/Range
Kbit/s
Note
None
Description
These counters provide the UL BLER of AMR and CS 64K Conv. services
on the DCH in the best cell. The counters are triggered in the best cell when
the number of UL TBs carrying the CS services on the DCH reaches the
defined sampling window (500 TBs).
Associated
Counters
VS.ULBler.AMR
Object
CELL
Unit/Range
Note
None
VS.ULBler.CS64
Description
This counter provides the UL BLER of PS services on the DCH in the best
cell.
The counters are triggered in the best cell when the number of UL TBs
carrying the PS services on the DCH reaches the defined sampling window
(500 TBs).
Issue 04 (2012-06-25)
88
RAN
KPI Reference
7 Service Integrity
Associated
Counters
VS.ULBler.PS.BE.DCH.8
VS.ULBler.PS.BE.DCH.16
VS.ULBler.PS.BE.DCH.32
VS.ULBler.PS.BE.DCH.64
VS.ULBler.PS.BE.DCH.128
VS.ULBler.PS.BE.DCH.144
VS.ULBler.PS.BE.DCH.256
VS.ULBler.PS.BE.DCH.384
VS.ULBler.PS.BE.RACH
VS.ULBler.PS.Conv
VS.ULBler.PS.Str
Object
CELL
Unit/Range
Note
None
Description
This counter indicates the mean downlink throughput for ONE HSDPA UE
in a cell.
When the data is transferred to an HSDPA serving cell, the RNC measures
the data transfer time of all the UEs and the total bytes sent in the cell. At the
end of the measurement period, the RNC divides the total bytes by the total
data transfer time to obtain the mean downlink throughput of MAC-d flow
in the cell. The RLC header and the retransmitted data are excluded.
Associated
Counters
VS.HSDPA.MeanChThroughput
Object
CELL
Unit/Range
Kbit/s
Note
None
Issue 04 (2012-06-25)
89
RAN
KPI Reference
7 Service Integrity
Description
This counter provides the MAC-hs throughput when at least one HSDPA user
is transferring data at the physical layer during the entire measurement period.
Associated
Counters
VS.DataOutput.Mean/(VS.DataTtiRatio.MeanVS.HSDPA.InactiveDataTtiRatio.Mean)
Object
NodeB
Unit/Range
Kbit/s
Note
We can apply the following formula to get the Mean HSDPA Cell Throughput
within RNC approximately:
HSDPA Cell Throughput (RNC Cell) =
VS.HSDPA.MeanChThroughput.TotalBytes x 8/[{SP} x 60]/1000
Where:
l {SP} is the Statistic Period with the unit of Minute.
l The KPI may not be accurate under the following condition: there is no
HSDPA User transferring data for a while during the total measurement
period. Therefore, the KPI should be evaluated during busy hour for
accuracy.
Description
This counter indicates the mean downlink throughput for ONE HSUPA UE
in a cell.
When the data is received in HSUPA active cells, the RNC measures the data
transfer time of all the UEs and the total bytes received in the cell. At the end
of the measurement period, the RNC divides the total bytes by the total data
transfer time to obtain the mean uplink throughput of MAC-d flow in the cell.
The RLC header and the retransfer data are excluded.
Associated
Counters
VS.HSUPA.MeanChThroughput
Object
CELL
Unit/Range
Kbit/s
Note
None
Issue 04 (2012-06-25)
90
RAN
KPI Reference
7 Service Integrity
Description
This counter provides the Mean HSUPA Cell Throughput when at least one
HSUPA user is transferring data during the entire measurement period.
Average bit rate of MAC-d data flows that the NodeB receives successfully
from all users over the time when data is transferred during a measurement
period. The time when there is data transfer during a measurement period is
calculated as follows: Sampling times of data transfer x length of the sampling
period If the number of received MAC-d PDU bits is 0 in a certain sampling
period, which is 10 ms in length, the NodeB does not count this period.
Associated
Counters
VS.HSUPA.MeanBitRate.WithData
Object
NodeB
Unit/Range
Kbit/s
Note
We can apply the following formula to get the Mean HSUPA Cell Throughput
within the RNC approximately:
HSUPA Cell Throughput (RNC Cell) =
VS.HSUPA.MeanChThroughput.TotalBytes x 8/[{SP} x 60]/1000
Where:
{SP} is the Statistic Period with the unit of Minute.
The KPI may not be accurate under the following condition: there is no
HSUPA User transferring data for a while during the total measurement
period. Therefore, the KPI should be evaluated during busy hour for accuracy.
Issue 04 (2012-06-25)
PS UL Throughput of RNC
91
RAN
KPI Reference
7 Service Integrity
Description
This measurement item provides the Average or Max uplink throughput for
PS services within an RNC.
l Measurement point for Average UL Throughput
The RNC periodically samples the uplink traffic values of the related PS
services in the PS domain. At the end of the measurement period, the RNC
divides the accumulated values by the number of samples to obtain the
mean uplink traffic of all the PS services in the PS domain. The uplink
traffic of all the PS services in the PS domain refers to the traffic obtained
at the RLC layer. The data does not include the RLC head data.
l Measurement point for Max UL Throughput
The RNC periodically samples uplink traffic values of all the related PS
services in the PS domain. At the end of the measurement period, the RNC
calculates the maximum uplink traffic of all the services in the PS domain
within the RNC. The uplink traffic of all the services in the PS domain
refers to the traffic obtained at the RLC layer. The data does not include
the RLC head data.
Associated
Counters
VS.R99PSLoad.ULThruput.RNC
VS.R99PSLoad.MaxULThruput.RNC
VS.HSUPAPSLoad.ULThruput.RNC
VS.HSUPAPSLoad.MaxULThruput.RNC
Object
RNC
Unit/Range
kbit/s
Note
None
Issue 04 (2012-06-25)
PS DL Throughput of RNC
92
RAN
KPI Reference
7 Service Integrity
Description
Associated
Counters
VS.R99PSLoad.DLThruput.RNC
VS.HSDPAPSLoad.DLThruput.RNC
VS.R99PSLoad.MaxDLThruput.RNC
VS.HSDPAPSLoad.MaxDLThruput.RNC
VS.MBMSPSLoad.DLThruput.RNC
VS.MBMSPSLoad.MaxDLThruput.RNC
Object
RNC
Unit/Range
kbit/s
Note
None
Issue 04 (2012-06-25)
Name
Description
These KPIs are used to check the throughput of MBMS service in a cell.
Associated
Counters
VS.MBMS.PTM.MeanThroughput
Object
CELL
Unit/Range
kbit/s
Note
None
VS.MBMS.PTP.MeanThroughput
93
RAN
KPI Reference
8 Traffic
Traffic
Issue 04 (2012-06-25)
94
RAN
KPI Reference
8 Traffic
Description
VS.CSLoad.Erlang.Equiv.RNC
This KPI provides the equivalent Erlang values of all the services in the CS
domain in the RNC.
The RNC periodically takes the samples from the equivalent Erlang values
of all the services in the CS domain. At the end of the measurement period,
the RNC divides the accumulated equivalent Erlang values by the number
of samples to obtain the mean equivalent Erlang values of all the services
in the CS domain.
Each time a CS domain service is established, the RNC converts its rate to
the equivalent Erlang, and then increases the equivalent Erlang of the CS
domain in the current RNC.
Each time a CS domain service is released, the RNC converts its rate to the
equivalent Erlang and decreases the equivalent Erlang of the CS domain in
the current RNC.
VS.CSLoad.MaxErlang.Equiv.RNC
This KPI provides the maximum equivalent Erlang values of all the services
in the CS domain within the RNC.
The RNC periodically takes a sample from the equivalent Erlang values of
all the services in the CS domain. At the end of the period, the RNC
calculates the maximum equivalent Erlang of all the services in the CS
domain within the RNC.
Each time a CS domain service is established, the RNC converts its rate to
the equivalent Erlang, and then increases the equivalent Erlang of the CS
domain in the current RNC.
Each time a CS domain service is released, the RNC decreases the
equivalent Erlang of the CS domain in the current RNC.
Associated
Counters
VS.CSLoad.Erlang.Equiv.RNC
Object
RNC
Unit/Range
Erl
Note
None
VS.CSLoad.MaxErlang.Equiv.RNC
Issue 04 (2012-06-25)
95
RAN
KPI Reference
8 Traffic
Number of CS Users
Description
These counters provide the number of CS (AMR and VP) users with different
UL and DL rates in cells of the active set.
The related RB number is sampled periodically in cells of the active set. At
the end of the measurement period, the value of each counter is obtained as
follows: dividing the accumulated value of each sampling point by the
number of sampling times.
Associated
Counters
l Cell Counters
(VS.RB.AMR.DL.12.2+
VS.RB.AMR.DL.10.2 +
VS.RB.AMR.DL.7.95 +
VS.RB.AMR.DL.7.4 +
VS.RB.AMR.DL.6.7 +
VS.RB.AMR.DL.5.9 +
VS.RB.AMR.DL.5.15 +
VS.RB.AMR.DL.4.75 );
VS.RB.CS.Conv.DL.64
l RNC Counters
(VS.RB.AMR.DL.4.75.RNC+
VS.RB.AMR.DL.5.15.RNC +
VS.RB.AMR.DL.5.9.RNC +
VS.RB.AMR.DL.6.7.RNC +
VS.RB.AMR.DL.7.4.RNC +
VS.RB.AMR.DL.7.95.RNC +
VS.RB.AMR.DL.10.2.RNC +
VS.RB.AMR.DL.12.2.RNC );
VS.RB.CS.Conv.DL.64.RNC
Object
CELL, RNC
Unit/Range
None
Note
The Unit is average user number, to get Erlang, the counter value should be
multiplied by {SP}/60, where {SP} is the measurement period (unit: minute).
For a VP service, V1 platform equals to four Erlangs and V2 platform equals
to two Erlangs.
Issue 04 (2012-06-25)
96
RAN
KPI Reference
8 Traffic
Description
These counters provide the number of PS R99 users with different UL and
DL rates in cells of the active set.
The related RB number is sampled periodically in cells of the active set. At
the end of the measurement period, the value of each counter is obtained as
follows: dividing the accumulated value of each sampling point by the
number of sampling times.
Issue 04 (2012-06-25)
97
RAN
KPI Reference
8 Traffic
Associated
Counters
Cell Level
l UL Counters:
VS.RB.PS.Bkg.UL.8
VS.RB.PS.Bkg.UL.16
VS.RB.PS.Bkg.UL.32
VS.RB.PS.Bkg.UL.64
VS.RB.PS.Bkg.UL.128
VS.RB.PS.Bkg.UL.144
VS.RB.PS.Bkg.UL.256
VS.RB.PS.Bkg.UL.384
VS.RB.PS.Int.UL.8
VS.RB.PS.Int.UL.16
VS.RB.PS.Int.UL.32
VS.RB.PS.Int.UL.64
VS.RB.PS.Int.UL.128
VS.RB.PS.Int.UL.144
VS.RB.PS.Int.UL.256
VS.RB.PS.Int.UL.384
VS.RB.PS.Conv.UL.42.8
VS.RB.PS.Conv.UL.40
VS.RB.PS.Conv.UL.39.2
VS.RB.PS.Conv.UL.38.8
VS.RB.PS.Str.UL.8
VS.RB.PS.Str.UL.16
VS.RB.PS.Str.UL.32
VS.RB.PS.Str.UL.64
VS.RB.PS.Str.UL.128
VS.RB.PS.Str.UL.144
VS.RB.PS.Str.UL.256.384
VS.RB.PS.Conv.UL.64
l DL Counters:
VS.RB.PS.Bkg.DL.8
VS.RB.PS.Bkg.DL.16
VS.RB.PS.Bkg.DL.32
VS.RB.PS.Bkg.DL.64
VS.RB.PS.Bkg.DL.128
VS.RB.PS.Bkg.DL.144
VS.RB.PS.Bkg.DL.256
VS.RB.PS.Bkg.DL.384
VS.RB.PS.Int.DL.8
Issue 04 (2012-06-25)
98
RAN
KPI Reference
8 Traffic
VS.RB.PS.Int.DL.16
VS.RB.PS.Int.DL.32
VS.RB.PS.Int.DL.64
VS.RB.PS.Int.DL.128
VS.RB.PS.Int.DL.144
VS.RB.PS.Int.DL.256
VS.RB.PS.Int.DL.384
VS.RB.PS.Conv.DL.42.8
VS.RB.PS.Conv.DL.40
VS.RB.PS.Conv.DL.39.2
VS.RB.PS.Conv.DL.38.8
VS.RB.PS.Str.DL.8
VS.RB.PS.Str.DL.16
VS.RB.PS.Str.DL.32
VS.RB.PS.Str.DL.64
VS.RB.PS.Str.DL.128
VS.RB.PS.Str.DL.144
VS.RB.PS.Str.DL.256.384
VS.RB.PS.Conv.DL.64
RNC Counters
l UL Counters:
VS.RB.PS.Bkg.UL.8.RNC
VS.RB.PS.Bkg.UL.16.RNC
VS.RB.PS.Bkg.UL.32.RNC
VS.RB.PS.Bkg.UL.64.RNC
VS.RB.PS.Bkg.UL.128.RNC
VS.RB.PS.Bkg.UL.144.RNC
VS.RB.PS.Bkg.UL.256.RNC
VS.RB.PS.Bkg.UL.384.RNC
VS.RB.PS.Int.UL.8.RNC
VS.RB.PS.Int.UL.16.RNC
VS.RB.PS.Int.UL.32.RNC
VS.RB.PS.Int.UL.64.RNC
VS.RB.PS.Int.UL.128.RNC
VS.RB.PS.Int.UL.144.RNC
VS.RB.PS.Int.UL.256.RNC
VS.RB.PS.Int.UL.384.RNC
VS.RB.PS.Str.UL.8.RNC
VS.RB.PS.Str.UL.16.RNC
VS.RB.PS.Str.UL.32.RNC
Issue 04 (2012-06-25)
99
RAN
KPI Reference
8 Traffic
VS.RB.PS.Str.UL.64.RNC
VS.RB.PS.Str.UL.128.RNC
VS.RB.PS.Str.UL.144.RNC
VS.RB.PS.Str.UL.256.384.RNC
VS.RB.PS.Conv.UL.8.RNC
VS.RB.PS.Conv.UL.16.RNC
VS.RB.PS.Conv.UL.32.RNC
VS.RB.PS.Conv.UL.64.RNC
VS.RB.PS.Conv.UL.38.8.RNC
VS.RB.PS.Conv.UL.42.8.RNC
VS.RB.PS.Conv.UL.40.RNC
VS.RB.PS.Conv.UL.39.2.RNC
l DL Counters:
VS.RB.PS.Bkg.DL.8.RNC
VS.RB.PS.Bkg.DL.16.RNC
VS.RB.PS.Bkg.DL.32.RNC
VS.RB.PS.Bkg.DL.64.RNC
VS.RB.PS.Bkg.DL.128.RNC
VS.RB.PS.Bkg.DL.144.RNC
VS.RB.PS.Bkg.DL.256.RNC
VS.RB.PS.Bkg.DL.384.RNC
VS.RB.PS.Int.DL.8.RNC
VS.RB.PS.Int.DL.16.RNC
VS.RB.PS.Int.DL.32.RNC
VS.RB.PS.Int.DL.64.RNC
VS.RB.PS.Int.DL.128.RNC
VS.RB.PS.Int.DL.144.RNC
VS.RB.PS.Int.DL.256.RNC
VS.RB.PS.Int.DL.384.RNC
VS.RB.PS.Str.DL.8.RNC
VS.RB.PS.Str.DL.16.RNC
VS.RB.PS.Str.DL.32.RNC
VS.RB.PS.Str.DL.64.RNC
VS.RB.PS.Str.DL.128.RNC
VS.RB.PS.Str.DL.144.RNC
VS.RB.PS.Str.DL.256.384.RNC
VS.RB.PS.Conv.DL.8.RNC
VS.RB.PS.Conv.DL.16.RNC
VS.RB.PS.Conv.DL.32.RNC
VS.RB.PS.Conv.DL.64.RNC
Issue 04 (2012-06-25)
100
RAN
KPI Reference
8 Traffic
VS.RB.PS.Conv.DL.42.8.RNC
VS.RB.PS.Conv.DL.40.RNC
VS.RB.PS.Conv.DL.39.2.RNC
VS.RB.PS.Conv.DL.38.8.RNC
Object
CELL, RNC
Unit/Range
None
Note
The Unit is average user number, to get Erlang, should be multiplied by {SP}/
60;
Description
This KPI provides the mean, maximum and minimum number of HSDPA
UEs in an HSDPA serving cell.
The RNC periodically samples the number of HSDPA UEs in the HSDPA
serving cell. At the end of the measurement period, the RNC obtains the mean
and maximum number of HSDPA UEs.
Associated
Counters
VS.HSDPA.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
None
VS.HSDPA.UE.Max.Cell
Description
These KPIs provide the mean and maximum number of HSUPA UEs in an
HSUPA serving cell.
The RNC periodically samples the number of HSUPA UEs in the HSUPA
serving cell. At the end of the measurement period, the RNC obtains the mean
and maximum number of HSUPA UEs.
Issue 04 (2012-06-25)
101
RAN
KPI Reference
8 Traffic
Associated
Counters
VS.HSUPA.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
VS.HSUPA.UE.Max.Cell
Description
This KPI provides the average number of UEs that are carried on the E-FACH
in the cell
The system periodically samples the UEs that are carried on the EFACH. At
the end of the measurement period, the average number of UEs that are carried
on the E-FACH in the measurement period is obtained by dividing the
accumulated value of sample data in the period by the number of samples.
Associated
Counters
VS.EFACHUEs
Object
CELL
Unit/Range
None
Note
Description
This KPI provides the average number of CS over HSPA users in the cell.
The system periodically samples the number of CS Over HSPA. At the end
of a statistical period, the system divides the sampling number by the sum at
each sampling point to obtain the average number of CS Over HSPA during
the period.
Issue 04 (2012-06-25)
Associated
Counters
VS.HSPA.UE.Mean.CS.Conv.Cell
Object
CELL
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
102
RAN
KPI Reference
8 Traffic
Unit/Range
None
Note
Description
This KPI provides the average number of HSDPA 64QAM UEs in an HSDPA
cell.
The number of HSDPA 64QAM UEs is sampled periodically in the HSDPA
cells. At the end of the measurement period, the RNC divides the accumulated
time weight value of each sampling point by the sampling period, thus
obtaining the average number of 64QAM UEs in the HSDPA cell.
Associated
Counters
VS.HSDPA.64QAM.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
Description
This KPI provides the average number of HSDPA MIMO UEs in an HSDPA
cell.
The number of HSDPA MIMO UEs is sampled periodically in the HSDPA
cells. At the end of the measurement period, the RNC divides the accumulated
time weight value of each sampling point by the sampling period, thus
obtaining the average number of MIMO UEs in the HSDPA cell.
Issue 04 (2012-06-25)
Associated
Counters
VS.HSDPA.MIMO.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
103
RAN
KPI Reference
8 Traffic
Description
This KPI provides the average number of HSUPA 16QAM UEs in an HSUPA
cell.
The number of HSUPA 16QAM UEs is sampled periodically in the HSUPA
cells. At the end of the measurement period, the RNC divides the accumulated
time weight value of each sampling point by the sampling period, thus
obtaining the average number of 16QAM UEs in the HSUPA cell.
Associated
Counters
VS.HSUPA.16QAM.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
Description
Associated
Counters
VS.HSDPA.MIMO64QAM.UE.Mean.Cell
Object
CELL
Unit/Range
None
Note
104
RAN
KPI Reference
8 Traffic
Description
The previous measurement counter provides the mean number of UEs that
subscribes to MBMS channel in PTP mode in a cell.
If the MBMS channel is in PTP mode, the number of cell_MBMS UEs is
reported when a connected UE orders or releases the program in the cell.
When the MBMS channel switches from PTM to PTP, the number of UEs
that have currently ordered the program in the cell is reported. When the
MBMS channel switches from PTP to PTM, the number of UEs that have
ordered the program in PTP mode is reported as 0.
Associated
Counters
VS.MBMS.PTP.UE.Channel0.Mean.Cell
VS.MBMS.PTM.UE.Channel0.Mean.Cell
VS.MBMS.PTP.UE.Channel1.Mean.Cell
VS.MBMS.PTM.UE.Channel1.Mean.Cell
VS.MBMS.PTP.UE.Channel2.Mean.Cell
VS.MBMS.PTM.UE.Channel2.Mean.Cell
VS.MBMS.PTP.UE.Channel3.Mean.Cell
VS.MBMS.PTM.UE.Channel3.Mean.Cell
VS.MBMS.PTP.UE.Channel4.Mean.Cell
VS.MBMS.PTM.UE.Channel4.Mean.Cell
Object
CELL
Unit/Range
None
Note
Description
This KPI provides the total downlink bytes of all the HSDPA MAC-d flows
in a cell.
When the data is transmitted to an HSDPA serving cell, the RNC measures
the number of total bytes sent in the downlink (including data of all types of
services) at the RLC layer for the MAC-d flow in the cell. The RLC header
and the retransmitted data are excluded.
Issue 04 (2012-06-25)
Associated
Counters
VS.HSDPA.MeanChThroughput.TotalBytes
Object
CELL
Unit/Range
byte
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
105
RAN
KPI Reference
8 Traffic
Note
None
Description
This counter provides the total uplink bytes of all the HSUPA MAC-d flows
in a cell.
When data is received in HSUPA active cells, the RNC measures the number
of total bytes received in the uplink (including data of different services) at
the RLC layer for the MAC-d flow in the cell. The RLC header and the
retransmitted data are excluded.
Associated
Counters
VS.HSUPA.MeanChThroughput.TotalBytes
Object
CELL
Unit/Range
byte
Note
None
Description
These KPIs provide the uplink traffic volume of different R99 services in all
cells of the active set.
The UL traffic volume (excluding the RLC header and the retransmitted data)
of each kind of R99 services over the RLC layer are accumulated for all cells
of the active set within SRNC.
Issue 04 (2012-06-25)
106
RAN
KPI Reference
8 Traffic
Associated
Counters
l CS Domain:
(VS.RB.AMR.UL.12.2 x 12200 +
VS.RB.AMR.UL.10.2 x 10200 +
VS.RB.AMR.UL.7.95 x 7950 +
VS.RB.AMR.UL.7.4 x 7400 +
VS.RB.AMR.UL.5.9 x 5900 +
VS.RB.AMR.UL.5.15 x 5150 +
VS.RB.AMR.UL.4.75 x 4750) x {SP} x 60
l PS Domain:
VS.PS.Bkg.UL.8.Traffic
VS.PS.Bkg.UL.16.Traffic
VS.PS.Bkg.UL.32.Traffic
VS.PS.Bkg.UL.64.Traffic
VS.PS.Bkg.UL.128.Traffic
VS.PS.Bkg.UL.144.Traffic
VS.PS.Bkg.UL.256.Traffic
VS.PS.Bkg.UL.384.Traffic
VS.PS.Int.UL.8.Traffic
VS.PS.Int.UL.16.Traffic
VS.PS.Int.UL.32.Traffic
VS.PS.Int.UL.64.Traffic
VS.PS.Int.UL.128.Traffic
VS.PS.Int.UL.144.Traffic
VS.PS.Int.UL.256.Traffic
VS.PS.Int.UL.384.Traffic
VS.PS.Str.UL.8.Traffic
VS.PS.Str.UL.16.Traffic
VS.PS.Str.UL.32.Traffic
VS.PS.Str.UL.64.Traffic
VS.PS.Str.UL.128.Traffic
VS.PS.Conv.UL.Traffic
Object
CELL
Unit/Range
bit
Note
None
Issue 04 (2012-06-25)
107
RAN
KPI Reference
8 Traffic
Description
These KPIs provide the downlink traffic volume of different R99 services in
all cells of the active set.
The DL traffic volume (excluding the RLC header and the retransmitted data)
of each kind of R99 services over the RLC layer are accumulated for all cells
of the active set within SRNC.
Issue 04 (2012-06-25)
108
RAN
KPI Reference
8 Traffic
Associated
Counters
l CS Domain:
(VS.RB.AMR.DL.12.2 x 12200 +
VS.RB.AMR.DL.10.2 x 10200 +
VS.RB.AMR.DL.7.95 x 7950 +
VS.RB.AMR.DL.7.4 x 7400 +
VS.RB.AMR.DL.5.9 x 5900 +
VS.RB.AMR.DL.5.15 x 5150 +
VS.RB.AMR.DL.4.75 x 4750) x {SP} x 60
VS.CS.Conv.DL.64.Traffic
VS.CS.Str.DL.57.6.Traffic
l PS Domain:
VS.PS.Bkg.DL.8.Traffic
VS.PS.Bkg.DL.16.Traffic
VS.PS.Bkg.DL.32.Traffic
VS.PS.Bkg.DL.64.Traffic
VS.PS.Bkg.DL.128.Traffic
VS.PS.Bkg.DL.144.Traffic
VS.PS.Bkg.DL.256.Traffic
VS.PS.Bkg.DL.384.Traffic
VS.PS.Int.DL.8.Traffic
VS.PS.Int.DL.16.Traffic
VS.PS.Int.DL.32.Traffic
VS.PS.Int.DL.64.Traffic
VS.PS.Int.DL.128.Traffic
VS.PS.Int.DL.144.Traffic
VS.PS.Int.DL.256.Traffic
VS.PS.Int.DL.384.Traffic
VS.PS.Str.DL.8.Traffic
VS.PS.Str.DL.16.Traffic
VS.PS.Str.DL.32.Traffic
VS.PS.Str.DL.64.Traffic
VS.PS.Str.DL.128.Traffic
VS.PS.Str.DL.144.Traffic
VS.PS.Str.DL.256.Traffic
VS.PS.Str.DL.384.Traffic
VS.PS.Conv.DL.Traffic
Issue 04 (2012-06-25)
Object
CELL
Unit/Range
bit
Note
None
109
RAN
KPI Reference
8 Traffic
Description
This KPI provides the number of downlink MAC PDU bytes sent by the
CRNC on the E-FACH over the Iub interface in a cell.
The measurement is triggered when the CRNC sends downlink data on the
E-FACH over the Iub interface.
Issue 04 (2012-06-25)
Associated
Counters
VS.CRNCIubBytesEFACH.Tx
Object
CELL
Unit/Range
byte
Note
None
110