FORMAT DUL ( Use PUTTY -- Conect Hyper Terminal cable to LMT A )
reload -OSE Delta PowerPC/BL250206
Welcome to OSE Shell ose5.3. $ Start of @(#)CXC1725340 R3A03 2010-02-26 07:56:41 GMT Plug-in Unit Product Name: DUL2001 Plug-in Unit Product No: KDU137533/4 Plug-in Unit Product rev: R1C Plug-in Unit Product Date: 20110625 Plug-in Unit Product Serial: CB4J280070 Ethernet MAC_address 0: 0x74D0DC010ACF RAM size: 1024 Mbytes Stop due to remain in basic/backup set $ formathd /d All data on volume will be destroyed. Continue? y/n (n):y $ reload -Formatting Hard Disk... $ formathd /c2 All data on volume will be destroyed. Continue? y/n (n):y Formatting Hard Disk... $ reload -OSE Delta PowerPC/BL250206 Welcome to OSE Shell ose5.3. $ Start of @(#)CXC1725340 R3A03 2010-02-26 07:56:41 GMT Plug-in Unit Product Name: DUL2001 Plug-in Unit Product No: KDU137533/4 Plug-in Unit Product rev: R1C Plug-in Unit Product Date: 20110625 Plug-in Unit Product Serial: CB4J280070 Ethernet MAC_address 0: 0x74D0DC010ACF RAM size: 1024 Mbytes Stop due to remain in basic/backup set ifconfig le0 169.254.1.10 netmask 255.255.0.0 ifconfig le0: inet 169.254.1.10 netmask 255.255.0.0 broadcast 169.254.255.255 $
AFTER FORMAT LOAD PACKAGE ( USE TOTAL COMMANDER -- Conect Lan cable to LMT B ) first c2 2nd d
LTE Basic Package DUS41_R27AS
AFTER LOADING Basic Package ( Open Putty and type the command " reload " ) All programs loaded and started All configured PIUs started on node Login Server Ready TO LOAD SCRIPT USE MOSHELL start using these commands: moshell 169.254.1.10 lt all cvls get 0 set 0 logicalName EJD142 set 0 site EJD142 set 0 userLabel EJD142 get 0 setclock 2015-05-06 16:39:00 readclock passwd ; rbs ; rbs alt
cvms after_changename_clock ---------- To create cv after Name change and clock
set cvls q moshell 169.254.1.10 lt all ( Copy Trans script to moshell home folder ) trun TRY033.mo
----- should be no errors
cvms after_giga_unlocked-----End,to create CV after giga unlock.
ifconfig ---------------- result should be the O&M IP
get routingtable ---------- result should be the O&M Gateway lst giga ------------------ should be unlock and enable ldeb 483------------------- to unlock giga lst giga------------------- to check unlock alt cvms after_giga_unlocked-----End,to create CV after giga unlock.
ping 172.24.226.113 ----
use this ping if transmission is GPON
ping 172.20.166.145 ------ use this ping if transmission is TN
lacc IpAccessHostEt=1 ping --Yes--Traffic gateway IP---- to ping the traffic IP cvset after_changename_clock------- to make change in the script like IP details (after this command give power reset to DUS and type trun TRI587.mo) To check node name type command "get . nodeinterfacename" it should be lh0 not l e0.To change type command "set . nodeinterfacename lh0". To change VLAN IDs:then 1-get ipinterface=1 lset 129 vid 3322 (new VLAN id) 2-get ipinterface=2 lset 130 vid 3324 AFTER LOADING IS FINISH YOU SHOULD PING THE GATEWAY M TU Synch Reference Loss of Signal (this alarm coming GPS cable not installed) NOTE: To paste in Moshell use SHIFT + INS key