Professional Documents
Culture Documents
0.3 Circular
Tolerance Zone
0.3 Circular
Tolerance Zone
60
Angularity
(Feature Axis to Datum Axis)
NOTE: Feature axis must lie
within tolerance zone cylinder
0.3 A
NOTE: Tolerance
applies to feature
at RFS
0.3 Circular
Tolerance Zone
0.3 Circular
Tolerance Zone
45 o
Datum Axis A
The tolerance zone in this example is defined by a
cylinder equal to the length of the feature, oriented
at the specified angle to the datum reference axis.
Perpendicularity
(Feature Surface to Datum Surface)
0.3 A
A
0.3 Wide
Tolerance Zone
Perpendicularity
(Feature Axis to Datum Surface)
0.3 Diameter
Tolerance Zone
C
0.3 Circular
Tolerance Zone
0.3 C
Perpendicularity
(Feature Axis to Datum Axis)
NOTE: Tolerance applies
to feature at RFS
0.3 A
Datum Axis A
The tolerance zone in this example is
defined by two parallel planes oriented
perpendicular to the datum reference axis.