Professional Documents
Culture Documents
Command NSN
Command NSN
1- ZEEI: BCF=<BCF NO> ;:- Tells about no. of calls in each sector at that time
2- ZEEL: BL;- Give information about the no . of blocked TRX in particular BCS
3- ZEOL :< BCF no>; :- Give information about present alarms
4- ZEOH:YYYY-MM-DD:HH-MM-SS:BCF=<BCF NO>; :-This command tells
about
history of alarms on particular date from particular time
5- ZAHO:ET:;- To check alarms on the ETs.
6- ZYMO:ET=<ET No.>; - To check ET link status have any errors or not, also to
check the slips on ET.
7- ZDTI:::PCM=<ET No.>; - To interrogate about Lap D signal on particular ET./
To Know on which BCF is this particular ET
8- ZUSI :TCSM ; : To check the status of transcoders
9- ZRBI:ALL; -- SEMIPERMANENT BROADBAND CONNECTIONS
HANDLING
10- ZACC< alarm no>; :--To delete a particular alarm
11- ZFWO:BCSU=0&&6:BTS:; - To check all the GB links in the particular BSC.
12- ZERS:BTS=<No.>,TRX=<No.>:L or U:; - To lock and unlock TRX.
13- ZAHO:TCSM:;- To check the alarms on the transcoders.
14- ZAHO::; - To check the alarms on the BSC.
15- ZESI:; - To check EDAP GPRS mapping.
16- ZEOL:<BCF No.>:; - To check the current alarms on the site.
17- ZDSB:::PCM=<ET No.>; - To check all the parameters of LAPDs.
18- ZWIP:GSW:<ET No.>; - To check the ET, is in which interface.
19- ZYEF:ET=<ET No.>; - To check whether loop on ET is getting or not.
20- ZEQS:BTS=<BTS No.>:L or U; - To lock or unlock BTS.