Professional Documents
Culture Documents
Assembly Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Glue the bottom edge of the purse back to one side of the purse bottom, curving the purse
back to fit the shape of the bottom, then glue the remaining side of the purse bottom to the
opposite purse side, as shown in Photo 8.
Glue the bottom of the purse front to the purse bottom, curving the purse front to follow the
contours of the back. Glue the sides of the purse front to the purse sides, one at a time, as
shown in Photo 9. If you are working with heavier paper, glue two or three tabs at a time
and allow them to dry before gluing the next tabs. This will make it easier to curve the purse
front to the shape of the sides.
Lace ribbon through the holes in the bustier front as shown in Photo 10.
Optional: Glue lace trim around the top of the bustier purse as shown in Photo 11.
Weave ribbon through the slots in the purse handle as shown in Photo 12.
Punch a small hole in each side of the purse approximately 1 from the top. Attach the
handle to the purse using decorative brads.
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Photo 13