Professional Documents
Culture Documents
BY MORGA
N
Kirby Morgan Dive Systems, Inc.
K 1430 Jason Way, Santa Maria, CA 93455
Phone: 805/928-7772 Fax: 805/928-0342
IV c
www.kirbymorgan.com Email: info@kirbymorgan.com
D
.
ES In
YSTEMS,
Part #925-144
Miller O-Ring Kit
Part # Description Qt
510-008 O-Ring 2
510-011 O-Ring 1
510-014 O-Ring 1
510-483 O-Ring 1
520-033 O-Ring 1
910-024 O-Ring 1
910-053 O-Ring 1
910-058 O-Ring 1
910-073 O-Ring 1
910-101 O-Ring 1
910-103 O-Ring 2
O-Ring Identification on Back of Page
O-Rings should be lubricated with Dow Corning #111 O-Ring silicone grease for maximum
life. The demands of your working environment will dictate the need to replace O-Rings,
as well as the frequency of your diving. At a minimum, all O-Rings should be replaced
once a year, or every 400 operating hours, whichever comes first. Exposure to extreme heat
or ozone will cause O-Rings to age prematurely. Helmets and masks which are used in a
heavy oil environment, in jetting operations, or exposed to caustic chemicals will require
more frequent O-ring replacement.
©Kirby Morgan Dive Systems, Inc. All Rights Reserved. Doc #060306001
IR
BY MORGA
N
Kirby Morgan Dive Systems, Inc.
K 1430 Jason Way, Santa Maria, CA 93455
Phone: 805/928-7772 Fax: 805/928-0342
IV c
www.kirbymorgan.com Email: info@kirbymorgan.com
D
.
ES In
YSTEMS,
O-Ring Identification
510-008
510-011 910-073
510-483
910-101
910-053
910-103
910-058
©Kirby Morgan Dive Systems, Inc. All Rights Reserved. Doc #060306001