Professional Documents
Culture Documents
Core Values
P
eople:
Everyone
can
make
a
difference.
We
value,
belief,
develop
and
empower
all
of
our
people.
E
ducation:
Education
is
the
way
to
achieve
the
full
potential
of
the
company.
T
ruthfulness:
Truthfulness
is
the
foundation
of
our
team
members
and
corporate
actions
that
drives
an
enterprise.
S
ervices:
We
believe
service
excellence
will
drive
the
results
that
differentiate
us
from
our
competitors.
E
xcellence:
We
excel
in
all
that
we
do,
and
the
way
in
which
we
do
it
CEMENT RETAINERS
PRODUCTION PACKERS
SETTING TOOLS
RETRIEVABLE PACKERS
SERVICE PACKERS
SPECIAL TOOLS
BRIDGE PLUGS
Model MWB Wireline Set Bridge Plugs are compact, small OD and
designed for easy drill out. These Bridge Plugs will set securely in all
but the very highest tensile casing. A ratchet lock ring stores the setting
force in the Plug. The one piece packing element and metal back up
rings combine for a superior seal. The case hardened, one piece slips
virtually eliminate premature setting, yet can be easily drilled out. They
are available for 2 3/8" through 20" casing.
Features:
• Sets securely in most casing, including many premium grades
• Ratchet lock rings secure dynamic setting force
• One piece packing element and rocker action metal back up
rings combine for a superior seal
• Compact, easy running
• Can be set directly with Baker wireline setting tools
• Shear studs are Baker style and connect directly to the Baker
Adjuster Sub
• These bridge plugs can be run directly on Baker Setting
Sleeves and Adjuster Subs
• Crossovers are not required
MWB
• Recommended to 300°F application for Normal Rubber, if need
high Temp BP, please contact MAP
1 info@pirahnaenergyservices.com
Model MMB Mechanical Bridge Plug
Model MMB Mechanical Bridge Plugs are used to isolate zones
for temporary or permanent abandonment. These drillable Bridge
Plugs set securely in any hardness casing. A ratchet lock ring
stores the setting force in the Bridge Plug. The one piece pack-
ing element and metal back up rings combine for a superior seal.
The case hardened, one piece slips virtually eliminate premature
setting, yet can be easily drilled out. They are available for 4 1/2"
through 16" casing.
Features:
• Sets securely in most casing, including many premium
grades
• Ratchet lock rings secure dynamic setting force
• One piece packing element and rocker action metal back up
rings combine for a superior seal
• Compact, easy running
• Set with Model MSB Mechanical Setting Tool
• These bridge plugs can be set on any standard baker style
mechanical setting tool
• Recommended to 300°F application for Normal Rubber, if
need high Temp BP, please contact MAP
MMB
SPECIFICATIONS
Wt Tool
Part Number Min Max
0D (in) 0D
T&C ID ID
(Pounds)
062-0359-009 4 1 /2 9.5-16.6 3.826 4. 090 3.59
2 info@pirahnaenergyservices.com
Model WRBP Wide Range Bridge Plug
Wide Range Wireline Set Bridge Plugs are specially designed to
run through tubing or restricted pipe and set securely in larger
tubing or casing below. These Bridge Plugs will set securely in any
hardness casing. A ratchet lock ring stores the setting force in the
Plug. The three piece packing element and metal back up rings
combine for a superior seal. The case hardened, one piece slips
virtually eliminate premature setting, yet can be easily drilled out.
They are available for 1.610" through 5.044" setting range.
Features:
• Sets securely in any hardness casing, including premium
grades
• Ratchet lock rings secure dynamic setting force
• Three piece packing element and rocker action metal back
up rings combine for a superior seal
• Compact, easy running
• Can be set either with GO, Baker or Gearhart wireline setting
tools
SPECIFICATIONS
Setting Range
Tool
Part Number
Min Max OD
ID OD
3 info@pirahnaenergyservices.com
Model MWBR Wireline Set Bridge Plugs (Retrievable)
Model "MWBR" wireline set retrievable bridge plug is a medium
performance retrievable bridge plug that is run and set by a
wireline pressure setting tool and retrieved by either tubing or
sandline. The plug is used for zone isolation, formation fracturing,
acidizing, and wellhead repair and can be lubricated in and out of
the well under pressure, thereby eliminating snubbing tubing or kill-
ing the well. The plug features a balanced equalizing value located
immediately above the three piece multi-hardness packing element
system. Caged, bi-di- rectional, one piece slips are located below the
packing and firmly anchor the plug against pressure differentials from
above or below. The plug is retrieved by ratcheting onto the retrieving
neck, picking up four inches to equalize, setting down to uplock, then
picking up to remove from well. No rotation is required to retrieve.
Features:
• Compact, fast running, electric wireline set
• Tubing or sandline retrieved - No rotation required
• Balanced equalizing valve opens upwardly which reduces
possibility of accidental opening
• Equalizes close to top of packing elements tubing
manipulation from the surface for better control
MWBR
• Field-proven design
4 info@pirahnaenergyservices.com
"PRODRILL" Composite Bridge Plug
The PRODRILL Composite Bridge Plug is designed to be used for
temporary zone isolation during stage fracs in horizontal and verti-
cal wells. The composites used in construction allows for short drill
time and ease of operation.
PRODRILL composites can be run with any wireline setting tool or
tubing run hydraulic setting tools. Cast iron slips are hardened to
wicker depth only and set in any grade of casing. Tested and rated
to 8,000 psi @ 275F. Pump down rubbers are available for 5 1/2"
or larger plugs.
Features:
• Sets securely in any hardness casing, including premium
grades
• Compact, easy running
• 8,000 PSI at 275 Degrees Fahrenheit
5 info@pirahnaenergyservices.com
"PRODRILL" Composite Frac Plug
The PRODRILL Composite Frac Plug is designed to be used for
temporary zone isolation during stage fracs in horizontal and verti-
cal wells. The composites used in construction allows for short drill
time and ease of operation.
PRODRILL composites can be run with any wireline setting tool or
tubing run hydraulic .setting tools. Cast iron slips are hardened to
wicker depth only and set in any grade of casing. Tested and rated
to 8,000 psi@ 275F. Pump down rubbers are available for 5 1/2"
or larger plugs. The Composite Frac Plug is sealed off by dropping
and pressuring against a 2" O.D. Phenolic Frac Ball.
Features:
• Sets securely in any hardness casing, including premium
grades
• Compact, easy running
• 8,000 PSI at 275 Degrees Fahrenheit
SPECIFICATIONS
Setting Range
Overall Tool
Part Number Casing 0. 0. Casing Wt.
Length Min Max O.D
1.0. O.D
6 info@pirahnaenergyservices.com