Professional Documents
Culture Documents
ZTE University
Content
System Broadcasting
Public Land Mobile Network (PLMN) ID, location area (LA), route
area (RA)
Information on the timers and counters related to the Radio
Resource Control (RRC) connections
Configuration information of the UTRAN registration area (URA)
Cell selection and reselection parameters
Parameters for configuring the common channels, such as FACH,
PCH, and RACH
Information on the uplink interference related to the auxiliary power
control
UE measurement control message over the idle or common
channel
Parameters of the adjacent cell
System information
SIB1
SIB2
SIB3/4
SIB15
SIB5/6
SIB7
SIB18
SIB11/12
SIB Block
SIB
Content
Controlled by
SIB1
RNC
SIB2
URA ID of a cell
RNC
SIB3/4
RNC
SIB5/6
RNC
SIB7
RNC/NodeB
SIB11/12
RNC
SIB 15
RNC
SIB 18
RNC
System broadcasting
SIB1
T300
N300
T312Idle
N312Idle
T302
N302
T304
N304
T305
T307
T308
N308
T309
T312 Connected
N312Connected
T313
N313
N315
T314
T315
T316
T317
T3212Cs
ATTIndCs
NMOPs
Kcs
Kps
SIB1
SIB2
Parameter Name
Parameter Description
URANum
Number of UTRAN registration areas
URA[4]
ID of a UTRAN registration area
SIB3/SIB4
SIB3/SIB4
Parameter Name
Cid
QualMeas
SIntraSearchPre
SIntraSearch
SInterSearchPre
SInterSearch
SSearchHCS Pre
SSearchHCS
SSearchRat
SHCSRatPre
SHCSRat
SLimitRat
QQualMin
QRxLevMin
DltaQRxLevMinPr
DltaQRxLevMin
Parameter Description
Cell ID
Measurement Quantity for Cell Selection and Reselection
Sintrasearch Configuration Tag
The threshold that triggers the intra-frequency measurement in the cell reselection
process
Sintersearch Configuration Tag
The threshold that triggers the inter-frequency measurement in the cell reselection
process
SsearchHCS Configuration Tag
The threshold that triggers the measurement in the HCS cell reselection process
The threshold that triggers the inter-system measurement in the cell reselection
process
SHCS,RAT Configuration Tag
The threshold that triggers the inter-system measurement in the HCS cell reselection
process
The threshold that triggers the inter-system cell measurement in the cell reselection
process
The minimum cell quality requirement level
The minimum cell receive electrical level threshold
DeltaQrxlevmin Configuration Tag
The minimum cell receive electrical level threshold increment
SIB5/SIB6
SIB5/SIB6
Parameter Name
TfsIndex
ChType
TfNum
TrBlkNum
RlcSize
TTI
CodingRate
RateMatchAttr
CRCSize
NiNumPerFrame
CPCId
MichPwr
MichChCode
Parameter Description
Transmission format index. It is used to indicate the attributes of a
transport channel, including channel type, transport format number,
number of transport blocks, transport block size, transmission time
interval, coding rate, rate matching attribute.
Channel Type
Transport Format Number
Number of Transport Blocks
Transport Block Size
Transmission Time Interval
Coding Rate
Rate Matching Attribute
CRC Size
Number of NI per Frame
Common Physical Channel ID
Power(dB)
Channelisation Code No.
SIB5/SIB6
Parameter Name
SttdInd
SttdInd
ChCode
AichTranTime
AichPwr
MplexPos
PCHInd
DlScraCode
ChCode
ChCode
SttdInd
CPCId
PichPwr
SttdInd
Signature
AvailSubChanNum
AvailableSF
Parameter Description
STTD Indicator
AICH STTD Indicator
AICH Channelisation Code No.
AICH Transmission Timing
AICH Power
Multiplexing Position
Indicator for SCCPCH Carrying PCH
SCPICH Scrambling Code
SCPICH Channelisation Code No
PICH Channelisation Code No.
PICH STTD Indicator
Pich Common Physical Channel ID
PICH Power
PCCPCH STTD Indicator
Available Signature
PRACH Available Subchannel Number
PRACH Available SF
SIB5/SIB6
Parameter Name
PreamScraCode
PcpichPwr
PunctLimit
SignalFach
TfcsIndex
CtfcNum
Ctfc
SCCPCHUsage
SccpchOffset
SttdInd
DlScraCode
DlChCodeNo
SlotFmt
SttdInd
Parameter Description
PRACH Preamble Scrambling Code
P-CPICH Power(dBm)
Puncturing Limit
FACH Usage
Index of a transmission format combination set. It must be configured for
S-CCPCH or PRACH.
Number of transmission format combination sets. It must be configured
for S-CCPCH or PRACH.
ID of a transmission format combination. It must be configured for SCCPCH or PRACH.
SCCPCH Usage
SCCPCH Frame Timing Offset
SCCPCH STTD Indicator
S-CCPCH Scrambling Code
S-CCPCH Channelisation Code No.
S-CCPCH Slot Format
P-CPICH STTD Indicator
SIB7
SIB11/SIB12
SIB18
SIB11bis
Parameter Description
Parameter Name
SIB11ORSIB11BIS Specify if an adjacent cell information can be
broadcast through SIB11bis
Parameter Name
T300
Description
Default Value
Configuration
Path
Parameter Name
N300
Description
07
3
Default Value
Configuration
Path
Parameter Name
T312Idle
Description
1 15 s
2s
Default Value
Configuration
Path
Parameter Name
N312Idle
Description
0 11
10
Default Value
Configuration
Path
Parameter Name
T302
Description
Default Value
Configuration
Path
Parameter Name
N302
Description
When the T302 counter expires and the number of the CELL
UPDATE or URA UPDATE messages sent by the UE is larger
than or equal to N302, the UE enters the Idle mode.
07
2
Default Value
Configuration
Path
Parameter Name
T304
Description
Default Value
Configuration
Path
Parameter Name
N304
Description
07
2
Default Value
Configuration
Path
Parameter Name
T305
Description
no
update 5 10 30 60 120 360 720 min
5min
Default Value
Configuration
Path
Parameter Name
T307
Description
5 10 15 20 30 40 50 s
5s
Default Value
Configuration
Path
T308
Description
40 80 160 320 ms
80ms
Default Value
Configuration
Path
Parameter Name
N308
Description
When the T308 counter expires and the number of the RRC
CONNECTION RELEASE COMPLETE messages sent by the
UE is larger than or equal to N308, the UE enters the Idle
mode.
18
1
Default Value
Configuration
Path
Parameter Name
T309
Description
18s
8s
Default Value
Configuration
Path
Parameter Name
T312Connected
Description
1 15 s
1s
Default Value
Configuration
Path
Parameter Name
N312Connected
Description
1 2 4 10
20 50 100 200 400 600 800 1000
1
Default Value
Configuration
Path
Parameter Name
T313
Description
0 15 s
3s
Default Value
Configuration
Path
Parameter Name
N313
Description
1 2 4 10 20 50 100 200
50
Default Value
Configuration
Path
Parameter Name
N315
Description
Default Value
Configuration
Path
T314
Description
When the criteria for radio link failure are fulfilled, T314 is
started if radio bearer(s) that are associated with T314 exist or
if only RRC connection exists only to the CS domain. When
the Cell Update procedure has been completed, T314 is
stopped.
0 2 4 6 8 12 16 20 s
4s
Default Value
Configuration
Path
T315
Description
When the RB is set up, the system uses T314 or T315 for the
RB. When the radio link fails and the current RB uses T315,
the system starts T315. When the cell updating process
finishes, the system stops T315.
Default Value
Configuration
Path
T316
Description
When the UE in the PCH state leaves the serving cell, the
system starts the T316 timer; when the UE detects the serving
cell, the system stops the T316 timer. When the T316 timer
expires, if the UE is in the serving cell, it initiates the cell
updating; if the T316 timer is not in the serving cell, it starts
the T317 timer and switches to the FACH state. When the UE
detects the serving cell, it starts the cell updating.
0 10 20 30 40 50 Infinity s
0s
Default Value
Configuration
Path
Parameter Name
T317
Description
When the T316 timer expires, the system starts the T317
timer; when the UE in the FACH leaves the serving cell, the
system starts the T317 timer. When the UE detects the
serving cell, it stops the T317 timer.
Default Value
Configuration
Path
MCC
Description
0 999
460
Default Value
Configuration
Path
MNC
Description
0 999
Default Value
Configuration
Path
CN Domain Supported
Parameter Name
CnDomain
Description
0: CS Domain
1: PS Domain
2: CS+PS
Default Value
2: CS+PS
Configuration
Path
T3212Cs
Description
Default Value
Configuration
Path
URA Number
Parameter Name
URANum
Description
14
N/A
Default Value
Configuration
Path
URA Identity
Parameter Name
Description
Range and Step
Default Value
Configuration
Path
URA 4
The parameter specifies the No. of the URA to which the
current area belongs.
0 65535
N/A
View->Configuration Management->RNC NE->RNC Radio
Resource Management->UtranCell->UtranCell Global
Information ->URA Identity
Cell Identity
Parameter Name
CId
Description
0 65534
N/A
Default Value
Configuration
Path
Content
Paging Flow
PAGING TYPE 1
Page Indicator
Page Indicator
Number of repeated
bits in the PICH
16
8
4
2
12 bits (transmission
off)
b287 b288
b299
Paging Occasion
Paging Occasion
Where:
N = number of SCCPCH channels carried over the PCH in a cell
DRX cycle length = 2k frame
PBP = 1
n = SFN
DRX Cycle
4095
2K-1
PO
PI
0
PI
1
PI
i-1
PI
i
PI
i+1
PI
Np-1
NAS Connection
PAGING TYPE 2
Paging Area
CN
URA_PCH
Cell
Cell_DCH
Cell_FACH
Routing
Area
UMTS
Registration
Area
Idle mode
Location
Area
KUtran
Description
39
6
Default Value
PagingSendTimes
Description
16
3
Default Value
Kcs
Description
69
6
Default Value
Configuration
Path
Kps
Description
69
6
Default Value
Configuration
Path
Np
Description
The larger the parameter, the higher the paging success rate,
but the larger the transmit power of the PICH channel.
18 36 72 144
18
Default Value
Configuration
Path
PICH Power
Parameter Name
PichPwr
Description
Default Value
Configuration
Path
Content
PRACH Structure
Preamble
Preamble
Preamble
4096 chips
Preamble
4096 chips
Message part
10 ms (one radio frame)
Preamble
Preamble
Message part
20 ms (two radio frames)
Preamble Part
Message Part
Data
Ndata bits
Data
Pilot
Npilot bits
Control
TFCI
NTFCI bits
Slot #0
Slot #1
Slot #i
Slot #14
Slot
Format #i
0
1
2
3
Channel Bit
Rate (kbps)
15
30
60
120
Channel Symbol
Rate (ksps)
15
30
60
120
SF
Bits/
Frame
256 150
128 300
64
600
32
1200
Bits/
Slot
10
20
40
80
Ndata
10
20
40
80
PRACH has totally 15 slots of 20ms and the slots belongs to two
access slot sets.
Access slot set 1 includes: slot 0~7 starting from p-a chips before the
DL P-CCPCH frame of SFN mod 2=0.
Access slot set 2 includes: slot 8~14 starting from p-a2560 chips
before the DL P-CCPCH frame of SFN mod 2=1.
AICH access
slots
p-a
#0
PRACH
access slots
SFN mod 2 = 0
#0
#1
#2
#1
#3
#2
#4
#3
#5
10 ms
#4
#6
SFN mod 2 = 1
#5
#7
#6
#8
#7
#9
#8
#9
#10
#11
#10
#11
#12
10 ms
#13
#12
#14
#13
#14
RACH Sub-channel
Sub-channel number
1
0 1 2 3
12 13 14
0
9 10 11 12
6 7
8 9
3 4 5 6
1 2 3
13 14
0
10 11 12
7
8 9
10 11
8
5
9
6
10 11
7
8
4 5
1 2 3
13 14
0 1 2
10 11 12 13 14
AICH access
slots RX at UE
p-a
PRACH access
slots TX at UE
Preamble
Preamble
p-p
Message part
p-m
PreamScraCode
Description
0 15
0
Default Value
Configuration
Path
Available Signature
Parameter Name
Signature
Description
Bit0: sig0
..
Bit15: sig15,
Bit=1 means the corresponding signature is valid.
Default Value
Each bit is 1
Configuration
Path
PRACH Available SF
Parameter Name
AvailableSF
Description
32 64 128 256
64
Default Value
Configuration
Path
PRStep
Description
1 8 dB step 1dB
1dB
Default Value
Configuration
Path
Parameter Name
MaxPreamRetrans
Description
1 64
40
Default Value
Configuration
Path
Parameter Name
POPpm
Description
Default Value
Configuration
Path
AvailSubChanNum
Description
bit0: subch0
..
bit11: subch11
Bit=1 means the corresponding sub channel is valid.
Default Value
Each bit is 1
Configuration
Path
MaxRACHTxPwr
Description
-50 33 dBm
24dBm
Default Value
Configuration
Path
Parameter Name
Mmax
Description
1 32
6
Default Value
Configuration
Path
PreamThs
Description
Default Value
Configuration
Path
Content
A dedicated channel
A common channel
UE
UTRAN
RRC CONNECTION REQUEST
RRC CONNECTION SETUP
RNC
RNC
UE(FACH)
RNC
Parameter Name
NReTran
Description
1 10
3
Default Value
Configuration
Path
Parameter Name
Twait
Description
0 15 s
5s
Default Value
Configuration
Path
FDDFreqRngNum
Description
0 32
2
Default Value
Configuration
Path
GsmBARangeNum
Description
0 32
3
Default Value
Configuration
Path
GsmLRange 32
This parameter indicates the frequency lower range of a
specific GSM BCCH distribution table that the local PLMN
controls. When UTRAN network and BSS network belong to
the same PLMN at the same time and UE has transferred
from RRC connected mode to Idle mode, UE will selects one
cell to reside. UTRAN contains this parameter in the message
of RRC CONNECTION RELEASE, indicating the possible
BCCH frequency range of neighboring GSM cells of the BSS
network. This parameter helps UE to speed up the process of
cell searching.
[0 1023]
N/A
View->Configuration Management->RNC NE->RNC Radio
Resource Management->RPLMN Range Information ->GSM
Lower Range
GsmURange 32
This parameter indicates the frequency upper range of a
specific GSM BCCH distribution table that the local PLMN
controls. When UTRAN network and BSS network belong to
the same PLMN at the same time and UE has transferred
from RRC connected mode to Idle mode, UE will selects one
cell to reside. UTRAN contains this parameter in the message
of RRC CONNECTION RELEASE, indicating the possible
BCCH frequency range of neighboring GSM cells of the BSS
network. This parameter helps UE to speed up the process of
cell searching.
[0 1023]
N/A
View->Configuration Management->RNC NE->RNC Radio
Resource Management->RPLMN Range Information ->GSM
Upper Range
UARFCN (Nlow)
Parameter Name
Description
Luarfcn 8
This parameter indicates the frequency lower range of a
specific UTRAN FDD frequency that the local PLMN controls.
When UE state is transferred from RRC connected mode to
idle mode, UE selects one cell to reside. UTRAN contains this
parameter in the message of RRC CONNECTION RELEASE,
indicating the possible transmission frequency range of the
UTRAN cells. This parameter helps UE to speed up the
process of cell searching.
Default Value
N/A
View->Configuration Management->RNC NE->RNC Radio
Resource Management->RPLMN Range Information
->UARFCN (Nlow)
UARFCN(Nupper)
Parameter Name
Description
Uuarfcn 8
This parameter indicates the frequency upper range of a
specific UTRAN FDD that the local PLMN controls. When UE
state is transferred from RRC connected mode to idle mode,
UE selects one cell to reside. UTRAN contains this parameter
in the message of RRC CONNECTION RELEASE, indicating
the possible transmission frequency range of the UTRAN
cells. This parameter helps UE to speed up the process of cell
searching.
Default Value
N/A
View->Configuration Management->RNC NE->RNC Radio
Resource Management->RPLMN Range Information
->UARFCN(Nupper)
Parameter Name
InitRrcOnDch
Description
Default Value
1
View->Configuration Management->RNC NE->RNC Radio
Resource Management->Basic Infomation ->Type of Transport
Channel for Initial RRC Connection Setup
Content
Description
Analysis
Analysis
UTRAN
CPICH
Preamble ..Preamble
AICH
Message of
PRACH
Analysis
Solution
Solution
Result
Test again, make a call 120 times, all the calls are
successful.
-21dB
-21
-18dB