Pins will be inserted into the holes to hold up the shelf this is cheap and effective as it can support the weight stored on the shelf. The holes are to be drilled exactly 100mm from the bottom and in the center so the shelf is squared and not at an angle when put in.
Pins will be inserted into the holes to hold up the shelf this is cheap and effective as it can support the weight stored on the shelf. The holes are to be drilled exactly 100mm from the bottom and in the center so the shelf is squared and not at an angle when put in.
Pins will be inserted into the holes to hold up the shelf this is cheap and effective as it can support the weight stored on the shelf. The holes are to be drilled exactly 100mm from the bottom and in the center so the shelf is squared and not at an angle when put in.
Pins will be inserted into the holes to hold up the shelf this is cheap and effective as it can support the weight stored on the shelf. The holes are to be drilled exactly 100mm from the bottom and in the center so the shelf is squared and not at an angle when put in place.