4 x 37" [Base and Upper Frame] 4 x 72" [Base and Upper Frame] 6 x 36" [Frame Vertical Legs 2 x 28" [Coop Floor Supports] 2 x 34" [Coop Floor Suports] 6 x 34.75" [Roof Trusses] 0.5" Plywood 35" x 37" [Coop Floor] 38.5" x 37" [Front Wall] 16.5" x 35" [Coop Side Wall] 2 x (6" x 15.5") [Coop Back Wall Vertical Pieces] 3" x 25" [Coop Back Wall Lower Horizontal Piece] 2 x (22" x 37") [Coop Back Wall Gable End Boards] 16.5" x 31.5" [Coop Door] 2 x (10" x 25") [Nest Box Floor & Nest Box Front] 3 x (10" x 14.5") [Nest Box Walls & Divider] 12" x 27" [Nest Box Lid] 2 x (35" x 72") [Roof Deck]
12" x 34" [Ramp Base Deck]
0.75"x 0.75" Timber 6 x 12" [Ramp Steps] Wire Mesh/Hardware Cloth 2 x (31.5" x 16") [Smaller Faces Under Nest Boxes] 40" x 36" [End Face of the Run] 40" x 16" [End Face Under Nest Boxes] 2 x (34" x 36") [Larger Faces of the Run] Fastners 4d (1.5") Nails (approx 78, 150 if using roof deck) 10d (3") Nails (approx 104) Wood Staples #8 Screws (5/32" or 0.164") [3/32" drill bit size] (approx 55) Hinges x2 for Coop Door x2 for Nest Box Lid x2 for Ramp Latch x1 for Coop Door