Professional Documents
Culture Documents
PROJECT PLAN
SHOP STAND
ROUTER TABLE DRAWERS
Exploded View
MATERIALS LIST
T x W x L
Cut the parts to the dimensions specified on the Cut 1/4" x 1/4" grooves in the inside face of the Bottom
Materials List. Mark the router bit storage hole locations. Drawer Front, Back and Sides. This groove captures the
Use your collection of router bits to determine the hole Drawer Bottom. Assemble both drawers with glue and
spacing. Bore a 5/8"-dia. hole at each bit location. The brad nails.
holes are sized to fit the Rockler Router Bit Storage
Inserts (57223).
Install both sets of Drawer/Shelf Brackets (67396) on Install the Shelf and both drawers. Then attach the Pulls
the Shop Stand. Attach the Bit Drawer drawer slides to and Drawer Faces.
the Brackets. Then prop up the Bit Drawer on the Shelf
and a second piece of 3/4"-thick scrap lumber. Mark the
slide locations on the outside face of the Bit Drawer side.
Mount the drawer slides at the top of the Bottom Drawer.