Professional Documents
Culture Documents
Four support feet, each support foot situated at the respective corner of the structure to support the lid of the structure. A drawer will be
situated between the support legs to slide materials easily in & out. Design needs to include provision to connect additional systems together
side by side and stack another system on top.
• Construction
• HIGH DENSITY POLYETHYLENE (HDPE)
• STAINLESS STEEL HARDWARE
• CAST ALUMINUM HANDLES
• GALVANIZED STEEL SUBFRAME
• Materials
• The lid, the support feet, and the center support may be made of marine grade high-density polyethylene and will support
1000lbs with aluminum braces. Lid and support feet to come in various colors. Support legs to be hollow.
• The drawer wheels will be made polyurethane Freedare 90A hardness PU material is perfect durable, stable, quiet. It slides fast
and smooth.
• The drawer will be made of marine grade high-density polyethylene. Drawers to come in various colors.
• The wheel channels will be made of aluminum channel
• Weight Capacities
• Lid = Evenly Distributed Payload 1000 lbs
• Drawer = Evenly Distributed payload 1000 lbs
• Will be easy to slide open with weight on the lid and with weight inside the drawer