Professional Documents
Culture Documents
M11500 Ver1 2011
M11500 Ver1 2011
|Technical Information
|Symbol Explanation
|Profile Index
3-8
9-10
11-30
31-124
31-82
83-84
85-96
97-102
103-104
105-114
|Milling-Tooling Operations
115-118
|Mechanisms
119-130
131-178
1:1|Profiles 1:1
131-136
|Basic Typologies
137-138
1:2|Sections 1:2
139-148
|Milling-Tooling Operations
149-150
|Mechanisms
156-178
|Entrance Doors
179-284
1:1|Profiles 1:1
179-220
|Basic Typologies
221-222
1:2|Sections 1:2
223-274
|Milling-Tooling Operations
275-284
|Glazings
285-290
291-302
- |Accessories - Gaskets
303-312
|General Information
313-320
V1/2011
V1/2011
Technical Information
V1/2011
European Groove.
76,5mm 84mm.
PA 6.6 38mm 34mm .
21,8
(
ALUSEAL).
6mm
(2,5mm)
.
130kg
54
:
,
Alumil
ISO 9001.
Alumil
QUALICOAT RAL (GSB).
Tilt & casement window system with thermal break and European
Groove mechanism.
27,2
Highest sealing with gaskets to three levels and central gasket with
scissors-like ending (ALUSEAL sealing system).
42,8
|Type of test
Air permeability
Weathertightness
Wind load resistance
Thermal Insulation
|Norm
|Testing Institute
|Test results
EN 12207
EKANAL
EN 12208
EKANAL
E900
EN 12210
EKANAL
C5
EN ISO 10077-2
ROSENHEIM
Uf = 1,9-2,1 W/m2K
: .
Note: Official test certificates may be sent upon request.
4
V1/2011
|Technical Information
|Technical characteristics
|Aluminum alloy
|Hardness
(/)|Minimum Powder Coating Thickness
(min-max)|Profile thickness (min-max)
|Thermal-brake type
|Profile Geometry Control
( \ )|Depth dimensions (Frame \ Sash)
|Glazing depth
|Maximum glazing weight
|Sealing
V1/2011
70mm
130kg
, EPDM
Three perimeter seals with EPDM gaskets
5
21,8
16mm .
76,5mm 85,5mm.
PA 6.6
38mm 34mm .
16mm
(
). K 24
() .
(
ALUSEAL).
- 5mm
.
6mm
(2,5mm)
.
100kg
55,2
:
,
Alumil ISO
9001.
Alumil QUALICOAT
RAL (GSB).
42,8
27,2
Highest sealing with gaskets to three levels and central gasket with
scissors-like ending (ALUSEAL sealing system).
|Type of test
Air permeability
Weathertightness
Wind load resistance
Thermal Insulation
|Norm
|Testing Institute
|Test results
EN 12207
EKANAL
EN 12208
EKANAL
E900
EN 12210
EKANAL
C5
EN ISO 10077-2
ROSENHEIM
Uf = 1,9-2,1 W/m2K
: .
Note: Official test certificates may be sent upon request.
6
V1/2011
|Technical Information
|Technical characteristics
|Aluminum alloy
|Hardness
(/)|Minimum Powder Coating Thickness
(min-max)|Profile thickness (min-max)
|Thermal-brake type
|Profile Geometry Control
( \ )|Depth dimensions (Frame \ Sash)
|Glazing depth
|Maximum glazing weight
|Sealing
V1/2011
V1/2011
Symbol Explanation
V1/2011
A =
C =
= T
N =
SC =
Sp =
SA =
R =
= x-x
G =
= y-y
TC =
TA =
SB =
* =
A = Alignment corner
= Sealing tape
C = Crimp cleat
= Width
N = Nail cleat
SC = Cast spring cleat
Sp = Special
= Height
= Couple Cleat
= External perimeter
= End cap
= Primary perimeter
= Saw
= Milling bit
= Rubber mallot
= Weight
= Drill jig
= Profile
= Punch press
= Page number
SB = Setting block
= Sealant
10
= Instant glue
V1/2011
Profile Index
V1/2011
11
12
mm
mm
mm
mm
cm4
cm4
gr/m
U-24x10x2
24
10
83
44
0,07
0,62
216
1001005
48,1
21,8
162
46
0,81
2,41
382
1001008
21,8
76,2
311
17,48
1,94
940
M11057
13,8
9,3
59
0,02
0,10
101
77
M11116
15
20,6
93
28
0,28
0,15
184
77
M11118
42,8
33
185
54
0,82
2,79
324
82
M11119
42,8
38
196
59
1,11
3,29
379
82
M11140
15,5
41,7
124
10
2,11
0,11
253
210
M11164
35,3
14,4
143
0,13
1,14
309
181
M11210
12,3
20
110
0,27
0,16
286
210
M11211
21,4
22
126
0,50
0,48
268
210
M11226
26,6
19,8
115
30
0,25
0,48
227
189
M11227
7,3
34
26
0,00
0,01
53
210
M11228
39,8
19,8
159
30
0,33
1,54
331
189
M11281
26,6
11,7
118
12
0,11
0,65
232
211
M11431
26,4
30,5
153
52
1,38
1,43
456
280-283
M11433
26,4
34,5
161
56
1,84
1,46
466
280-283
219
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11435
26,4
26,5
137
48
1,03
1,32
428
280-283
M11437
26,4
19
97
35
0,37
0,99
337
280-283
M11439
26,4
22,5
132
44
1,25
0,73
409
280-283
M11440
26,4
38,5
172
60
1,53
2,46
489
280-283
M11445
26,7
38,5
212
56
2,10
0,98
370
280-283
M11447
10,3
26,7
93
25
0,32
0,06
148
79
M11449
26,4
19
99
40
0,55
1,12
359
280-283
M11451
26,7
19,4
180
40
0,84
0,47
307
280-283
M11452
26,7
22,5
184
44
0,86
0,70
313
280-283
M11453
26,7
26
190
48
0,97
0,89
325
280-283
M11454
26,7
30,5
205
52
1,34
0,95
351
280-283
M11457
19
56
18
0,02
0,15
114
102
M11460
26,7
38,5
220
60
2,33
1,02
387
280-283
13
14
mm
mm
mm
mm
cm4
cm4
gr/m
M11461
26,7
19,4
169
36
0,41
0,74
285
280-283
M11462
26,7
22,5
175
40
0,60
0,80
298
280-283
M11463
26,7
26,5
183
44
0,87
0,84
313
280-283
M11464
26,7
30,5
197
48
1,17
0,89
332
280-283
M11465
26,7
34,5
204
52
1,60
0,94
354
280-283
M11482
21
26,5
351
110
0,91
0,81
1997
102
M11483
26,7
42,5
228
64
2,97
1,05
402
280-283
M11485
26,7
42,5
220
60
2,71
1,01
385
280-283
M11493
22,5
30,5
126
48
0,79
1,53
406
280-283
M11504
23
97
250
100
38,46
1,82
1152
79
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11508
48
76,5
434
78
34,89
5,87
1365
32
M11510
58
76,5
454
98
41,41
12,55
1567
32
M11514
68
76,5
474
118
46,80
22,60
1724
33
176
M11516
58
91,4
517
105
60,64
16,17
1760
36
M11518
68
91,4
538
125
67,96
27,68
1931
37
179
M11520
58
91,4
526
109
62,23
16,97
1784
38
M11526
48
91,4
498
85
52,27
8,15
1563
36
M11528
68
91,4
545
129
69,68
28,95
1955
38
180
M11530
66
84
423
92
47,10
8,21
1554
46
15
16
mm
mm
mm
mm
cm4
cm4
gr/m
M11534
76
84
442
112
54,26
15,63
1735
46
M11538
96
84
482
152
68,51
42,72
2119
47
189
M11540
66
84
436
88
48,12
9,25
1602
47
M11544
76
84
455
108
55,05
17,21
1768
48
M11548
96
84
493
148
69,19
45,53
2163
48
190
M11550
76
98,9
485
118
62,06
15,86
1851
50
M11551
96
91,4
463
95
49,24
10,69
1655
45
M11552
96
91,4
523
156
69,66
48,76
2199
57
M11562
70
76,5
486
104
38,90
8,75
1464
57
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11564
80
76,5
506
124
45,42
16,55
1665
58
M11566
90
76,5
527
144
50,87
27,93
1833
58
193
M11568
150
76,5
645
264
90,73 201,22
3077
63
197
M11570
200
76,5
750
364
498,20 120,93
3990
64
198
M11573
76
84
483
116
56,17
19,32
1821
45
M11578
141,5
90
645
243
174,17 51,98
2622
70
203
M11580
44,5
161,4
592
148
203,73 17,36
2075
43
17
18
mm
mm
mm
mm
cm4
cm4
gr/m
M11582
90,4
76,5
402
145
54,46
38,47
1905
183
M11584
90,4
76,5
402
145
52,25
38,73
1924
186
M11586
68
76,5
350
118
46,90
29,22
1764
174
M11588
68
76,5
352
118
48,27
28,83
1738
174
M11590
80
84
523
124
55,71
17,03
1747
71
203
M11592
63,4
80,7
289
64
26,00
8,05
1154
73
M11594
74,7
93,7
329
74
41,32
14,19
1306
74
M11596
129,8
122,9
414
166
80,86
81,51
1970
75
M11600
108,8
62,8
334
116
22,94
44,14
1624
76
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11621
14,2
9,2
74
0,02
0,09
98
78
M11622
46
76,5
362
92
41,80
15,45
1530
80
M11623
26
76,5
322
52
29,95
2,72
1168
80
M11630
76
84
459
107
52,12
17,03
1741
53
M11636
117
76,5
450
198
76,13
97,09
2482
184
M11642
152
76,5
708
286
94,69 191,24
2993
206
M11644
76,5
76,6
376
107
30,47
46,46
1778
192
M11649
58
194
739
222
406,53 23,67
2743
39
19
20
mm
mm
mm
mm
cm4
cm4
gr/m
M11656
39
74,9
292
43
25,83
3,62
1132
212
M11658
65,4
79,8
494
65
37,44
10,45
1497
72
211
M11662
48,7
73,5
281
48
28,41
5,33
1181
182
M11668
68
161,4
679
188
236,28 38,83
2583
40
181
M11670
73,8
21,8
339
23
1,49
23,52
990
188
M11674
59,2
23,9
176
105
2,95
16,62
1067
213
M11684
64,8
17,5
165
37
1,01
14,57
895
213
M11688
122,5
90
609
20
124,76 46,85
2465
69
202
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11690
96
84
498
148
65,90
44,58
2104
54
191
M11694
52,7
76,5
371
57
31,66
9,18
1267
41
182
M11705
58
103,9
569
110
58,04
13,67
1751
44
M11716
76
92,5
464
125
69,52
21,10
1900
52
M11717
76
107,4
496
136
77,55
19,58
1983
52
M11722
119,6
90
616
230
134,89 43,85
2468
66
199
M11724
77,7
29,6
262
49
2,10
26,75
966
209
M11726
95
76,5
538
154
53,87
35,19
1923
60
195
21
22
mm
mm
mm
mm
cm4
cm4
gr/m
M11730
66
84
422
85
47,23
8,20
1563
55
M11732
139,6
90
656
270
195,34
49,71
2630
68
201
M11734
104,4
84
482
176
81,90
72,20
2413
185
M11742
152
76,5
629
286
98,34 200,24
3112
207
M11744
76
84
514
108
54,66
16,27
1776
53
M11754
82,4
76,5
366
86
59,80
56,49
2098
188
M11758
65,4
87,3
510
68
43,48
11,49
1565
72
211
M11762
167
76,5
675
316
103,63 393,26
3677
178
M11766
90
76,5
528
144
53,26
1919
59
194
28,64
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11770
90
76,5
528
144
55,86
29,56
2036
59
194
M11774
69
18,5
180
19
1,11
17,62
920
213
M11778
90
89,4
539
155
71,99
39,67
2131
71
M11786
68
91,4
410
125
67,80
35,12
2007
175
M11788
68
91,4
423
125
76,09
34,79
1972
175
M11790
108,8
107,6
371
153
55,95
48,24
1784
77
M11814
78,5
76,5
496
139
53,87
37,89
1950
33
176
M11818
78,5
91,4
559
146
77,33
44,91
2148
37
179
M11820
66
91,4
504
101
63,47
12,91
1791
49
23
24
mm
mm
mm
mm
cm4
cm4
gr/m
M11824
76
91,4
524
121
71,70
22,52
1952
49
M11828
96
91,4
564
161
87,50
54,83
2335
50
190
M11832
61
76,5
524
104
41,74
8,87
1550
41
M11842
137
76,5
599
256
85,29 132,39
2708
204
M11862
70
91,4
583
125
58,57
13,38
1671
65
M11866
90
91,4
623
165
73,86
36,65
2035
65
M11872
39
74,9
287
43
28,08
4,21
1117
212
M11873
71,5
85,4
455
100
54,16
12,70
1703
126
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
M11874
126,5
90
629
244
133,40 41,56
2369
67
200
M11875
65,4
88,9
454
68
50,06
11,81
1723
129
M11876
71,5
85,5
440
96
53,22
11,09
1659
127
M11877
71,5
85,5
442
105
53,22
11,07
1663
126
M11878
71,5
85,4
472
103
55,39
13,48
1723
127
M11879
65,4
81,6
438
65
43,32
10,75
1655
129
M11880
90,4
76,5
422
140
50,63
37,33
1904
187
cm4
cm4
gr/m
25
26
mm
mm
mm
mm
cm4
cm4
gr/m
M11882
90,4
76,5
404
145
52,81
37,08
1872
185
M11884
90,4
76,5
422
145
51,14
37,53
1905
186
M11886
118
76,5
583
200
67,60
82,68
2348
61
195
M11888
132
76,5
612
228
75,98 124,48
2605
62
196
M11890
96,1
91,4
570
161
81,38
51,65
2219
54
191
M11893
96,1
84
586
145
66,00
42,38
2085
56
193
M11898
110
98,9
561
147
87,48
73,18
2538
51
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11904
105
79,8
558
113
45,95
26,07
1721
101
M11906
110
76,5
559
202
71,72 111,49
2503
34
177
M11908
70
76,5
479
100
39,52
14,45
1468
98
M11910
78,5
76,5
531
174
63,43
72,72
2247
34
177
M11912
54,9
78,6
393
88
36,15
7,55
1421
99
M11916
114
76,5
578
148
46,77
28,09
1701
100
M11920
134
76,5
613
188
59,76
56,75
2103
101
M11926
54,9
78,6
398
88
37,13
7,99
1441
99
27
28
mm
mm
mm
mm
cm4
cm4
gr/m
M11934
76
84
442
106
54,28
15,72
1733
55
M11938
96
84
482
146
68,57
43,05
2127
56
192
M11942
142
76,5
610
266
88,43 150,53
2803
205
M11945
22,5
38,5
170
56
2,12
0,81
331
280-283
M11961
22,5
18,5
111
36
0,29
0,57
219
280-283
M11962
22,5
22,5
119
40
0,46
0,62
236
280-283
M11963
22,5
26,5
127
44
0,69
0,67
252
280-283
M11965
22,5
34,5
162
52
1,59
0,78
315
280-283
M11966
104,4
76,5
424
174
57,92
63,52
2160
187
V1/2011
|Profile Index
V1/2011
mm
mm
mm
mm
cm4
cm4
gr/m
M11968
104,4
76,5
426
174
64,38
64,21
2228
183
M11972
94,8
85,5
484
143
70,97
39,51
2131
128
M11976
77,2
85,5
449
108
58,78
16,19
1809
128
M11978
90
76,5
518
140
51,36
35,20
1848
98
M11982
152
76,5
629
286
92,47 187,13
2853
208
M11988
47,6
140,5
559
141
145,43 11,28
1997
42
M11992
142
76,5
623
266
104,35 153,63
2830
209
29
30
mm
mm
mm
mm
cm4
cm4
gr/m
M11994
57,9
83
408
92
64,09
20,80
2512
100
M11995
33,6
12,3
126
67
0,32
1,30
464
78
M15110
26,7
34,5
213
56
1,77
0,98
363
280-283
M9112
25,8
19,4
140
30
0,53
0,29
239
280-283
M9312
26,5
19,3
143
35
0,31
0,68
241
280-283
M9313
26,5
15,7
94
24
0,23
0,42
175
280-283
M9317
21
15,9
85
29
0,12
0,30
180
79
M9379
42,38
117,6
363
197
78,31
11,21
1445
81
M9381
13,3
117,6
264
140
50,38
0,88
1036
81
M946
26,5
19,5
125
27
0,56
0,22
224
280-283
M9565
26,7
19,5
142
31
0,27
0,64
254
280-283
V1/2011
European Groove ( )
European Groove Mechanism (visible sash)
1:1|Profiles 1:1
V1/2011
31
M11508
48
113-13-117-00
180-25-010-00
72,5
76,5
290-11-503-00
113-13-196-00
Aluminium spring cleat
Alignment corner
125-13-196-00
26
180-25-010-00
72,5
76,5
290-11-503-00
113-23-196-00
112-23-196-00
36
32
125-13-196-00 |inner
180-25-010-00 |outer
M11510
58
113-23-121-00
|Flat frame
434 mm
External perimeter
78 mm
Primary perimeter
x-x
34,89 cm4
Moment of inertia x-x
y-y
5,87 cm4
Moment of inertia y-y
1365 gr/m
Weight
290-11-503-00
Setting block
113-13-117-00 |outer
|Crimp nail cleat 113-13-196-00 |inner
|Flat frame
454 mm
External perimeter
98 mm
Primary perimeter
x-x
41,41 cm4
Moment of inertia x-x
y-y
12,55 cm4
Moment of inertia y-y
1567 gr/m
Weight
290-11-503-00
Setting block
113-23-121-00 |outer
|Crimp nail cleat 113-23-196-00 |inner
Crimp cleat with recess
Alignment corner
112-23-196-00 |inner
180-25-010-00 |outer
V1/2011
1:1|Profiles1:1
M11514
68
113-33-121-00
180-25-010-00
72,5
76,5
290-11-503-00
Crimp cleat pre-tapped
113-33-196-00
112-33-196-00
125-33-196-00
Aluminium spring cleat
Alignment corner
46
A 180-25-010-00
72,5
76,5
290-11-503-00
113-43-194-00
125-43-194-00
56,5
V1/2011
112-33-196-00
|inner
125-33-196-00 |inner
180-25-010-00 |outer
M11814
78,5
113-43-121-00
|Flat frame
474 mm
External perimeter
118 mm
Primary perimeter
x-x
46,80 cm4
Moment of inertia x-x
y-y
22,60 cm4
Moment of inertia y-y
1724 gr/m
Weight
290-11-503-00
Setting block
113-33-121-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
|Flat frame
496 mm
External perimeter
139 mm
Primary perimeter
x-x
53,87 cm4
Moment of inertia x-x
y-y
37,89 cm4
Moment of inertia y-y
1950 gr/m
Weight
290-11-503-00
Setting block
113-43-121-00 |outer
|Crimp nail cleat 113-43-196-00 |inner
Aluminium spring cleat
Alignment corner
125-43-194-00 |inner
180-25-010-00 |outer
33
M11910
78,5
113-61-121-00
160-11-861-91
180-25-010-00
72,5
76,5
290-11-503-00
113-61-196-00
160-11-261-91
74
|Flat frame
531 mm
External perimeter
174 mm
Primary perimeter
x-x
63,43 cm4
Moment of inertia x-x
y-y
72,72 cm4
Moment of inertia y-y
2247 gr/m
Weight
290-11-503-00
Setting block
113-61-121-00 |outer
|Crimp nail cleat 113-43-196-00 |inner
160-11-861-91 |outer
Aluminium
160-11-261-91 |inner
transom-mullion cleat
180-25-010-00 |outer
Alignment corner
180-25-010-00
110
113-75-121-00
M11906
290-11-503-00
113-75-196-00
160-11-275-91
88
34
72,5
76,5
160-11-875-91
|Flat frame
559 mm
External perimeter
202 mm
Primary perimeter
x-x
71,72 cm4
Moment of inertia x-x
y-y
111,49 cm4
Moment of inertia y-y
2503 gr/m
Weight
290-11-503-00
Setting block
113-75-121-00 |outer
|Crimp nail cleat 113-75-196-00 |inner
160-11-875-91 |outer
Aluminium
160-11-275-91 |inner
transom-mullion cleat
180-25-010-00 |outer
Alignment corner
V1/2011
1:1|Profiles1:1
167
160-11-813-91
160-11-813-91
165-11-002-00
|or
165-11-001-00
72,5
76,5
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
145
M11762
-|Frame-Kickplate
675 mm
External perimeter
316 mm
Primary perimeter
x-x
103,63 cm4
Moment of inertia x-x
y-y
393,26 cm4
Moment of inertia y-y
3677 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
|or
Cast transom-mullion cleat 165-11-002-00 |left
165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
V1/2011
35
180-25-060-00
48
M11526
113-13-274-00
125-13-274-00
91,4
180-19-000-00
72,5
290-11-503-00
|Round frame
498 mm
External perimeter
85 mm
Primary perimeter
x-x
52,27 cm4
Moment of inertia x-x
y-y
8,15 cm4
Moment of inertia y-y
1563 gr/m
Weight
290-11-503-00
Setting block
113-13-274-00 |outer
|Crimp nail cleat 113-13-196-00 |inner
Aluminium spring cleat
Alignment corner
113-13-196-00
125-13-196-00
125-13-274-00 |outer
125-13-196-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
26
180-25-060-00
58
M11516
113-23-270-00
125-23-270-00
180-19-000-00
72,5
91,4
290-11-503-00
113-23-196-00
125-23-196-00
|Round frame
517 mm
External perimeter
105 mm
Primary perimeter
x-x
60,64 cm4
Moment of inertia x-x
y-y
16,17 cm4
Moment of inertia y-y
1760 gr/m
Weight
290-11-503-00
Setting block
113-23-270-00 |outer
|Crimp nail cleat 113-23-196-00 |inner
Aluminium spring cleat
Alignment corner
125-23-270-00 |outer
125-23-196-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
36
36
V1/2011
1:1|Profiles1:1
180-25-060-00
68
M11518
113-33-274-00
125-33-270-00
91,4
180-19-000-00
72,5
290-11-503-00
|Round frame
538 mm
External perimeter
125 mm
Primary perimeter
x-x
67,96 cm4
Moment of inertia x-x
y-y
27,68 cm4
Moment of inertia y-y
1931 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Alignment corner
113-33-196-00
125-33-196-00
125-33-270-00 |outer
125-33-196-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
46
180-25-060-00
78,5
M11818
113-43-270-00
125-43-270-00
180-19-000-00
72,5
91,4
290-11-503-00
113-43-194-00
125-43-194-00
|Round frame
559 mm
External perimeter
146 mm
Primary perimeter
x-x
77,33 cm4
Moment of inertia x-x
y-y
44,91 cm4
Moment of inertia y-y
2148 gr/m
Weight
290-11-503-00
Setting block
113-43-270-00 |outer
|Crimp nail cleat 113-43-194-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00 |outer
125-43-194-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
56,5
V1/2011
37
180-25-025-00
58
M11520
113-23-270-00
125-23-270-00
91,4
180-19-000-00
72,5
290-11-503-00
113-23-196-00
125-23-196-00
|Chamfered frame
526 mm
External perimeter
109 mm
Primary perimeter
x-x
62,23 cm4
Moment of inertia x-x
y-y
16,97 cm4
Moment of inertia y-y
1784 gr/m
Weight
290-11-503-00
Setting block
113-23-270-00 |outer
|Crimp nail cleat 113-23-196-00 |inner
125-23-270-00 |outer
125-23-196-00 |inner
Aluminium spring cleat
180-19-000-00 |outer
Alignment corner
180-25-025-00 |outer
36
180-25-025-00
68
M11528
113-33-274-00
125-33-270-00
91,4
180-19-000-00
72,5
290-11-503-00
113-33-196-00
125-33-196-00
|Chamfered frame
545 mm
External perimeter
129 mm
Primary perimeter
x-x
69,68 cm4
Moment of inertia x-x
y-y
28,95 cm4
Moment of inertia y-y
1955 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Alignment corner
125-33-270-00 |outer
125-33-196-00 |inner
180-19-000-00 |outer
180-25-025-00 |outer
46
38
V1/2011
1:1|Profiles1:1
58
180-19-000-00
140-00-219-00
194
M11649
113-23-121-00
72,5
290-11-503-00
2743 gr/m
Weight
290-11-503-00
Setting block
113-23-196-00
|inner
113-23-121-00
|Crimp nail cleat
|between
113-23-196-00
125-23-196-00
Aluminium spring cleat
|Cast spring cleat
125-23-196-00 |inner
140-00-219-00 |outer
36
V1/2011
39
161,4
68
113-33-274-00
180-19-000-00
125-33-270-00
M11668
180-25-260-00
72,5
290-11-503-00
113-33-196-00
125-33-196-00
46
40
- |Round frame-column
679 mm
External perimeter
188 mm
Primary perimeter
x-x
236,28 cm4
Moment of inertia x-x
y-y
38,83 cm4
Moment of inertia y-y
2583 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
125-33-270-00 |outer
125-33-196-00 |inner
Aluminium spring cleat
180-19-000-00 |outer
Alignment corner
180-25-260-00 |outer
V1/2011
1:1|Profiles1:1
30,7
M11694
72,5
113-23-121-00
76,5
113-23-156-00
180-25-010-00
|Beauty profile
371 mm
External perimeter
57 mm
Primary perimeter
x-x
31,66 cm4
Moment of inertia x-x
y-y
9,18 cm4
Moment of inertia y-y
1267 gr/m
Weight
113-23-156-00 |outer
|Crimp nail cleat 113-23-121-00 |inner
180-25-010-00 |inner
Alignment corner
52,7
61
180-25-010-00
250-11-833-01
113-13-117-00
290-11-503-00
72,5
76,5
|Alternative
L 30x3
250-11-832-01
M11995
|Alternative
113-13-196-00
39
M11832
V1/2011
|Flat frame
524 mm
External perimeter
104 mm
Primary perimeter
x-x
41,74 cm4
Moment of inertia x-x
y-y
8,87 cm4
Moment of inertia y-y
1550 gr/m
Weight
290-11-503-00
Setting block
113-13-117-00 |outer
|Crimp nail cleat 113-13-196-00 |inner
180-25-010-00 |outer
Alignment corner
41
72,5
250-11-080-01
|Alternative
290-11-503-00
180-25-010-00
140,5
113-15-121-00
140-00-219-00
230-00-959-01
L 30x3
47,6
M11988
|Frame
559 mm
External perimeter
141 mm
Primary perimeter
x-x
145,43 cm4
Moment of inertia x-x
y-y
11,28 cm4
Moment of inertia y-y
1997 gr/m
Weight
290-11-503-00
Setting block
113-15-102-00
|inner
113-15-121-00
|Crimp nail cleat
|between
|Cast spring cleat
Alignment corner
42
140-00-219-00 |outer
180-25-010-00
V1/2011
1:1|Profiles1:1
22,5
L 25x3
113-13-101-00
72,5
250-11-080-01
290-11-503-00
|Alternative
180-25-010-00
161,4
113-13-121-00
SC 140-00-219-00
230-00-959-01
L 25x3
44,5
M11580
|Two pieces frame
592 mm
External perimeter
148 mm
Primary perimeter
x-x
203,73 cm4
Moment of inertia x-x
y-y
17,36 cm4
Moment of inertia y-y
2075 gr/m
Weight
290-11-503-00
Setting block
113-13-121-00 |outer
|Crimp nail cleat 113-13-101-00 |inner
180-25-010-00
Alignment corner
V1/2011
43
|Alternative
M9381
M9379
58
M11705
113-23-121-00
103,9
180-25-010-00
72,5
76,5
290-11-503-00
113-23-196-00
125-23-196-00
44
1751 gr/m
Weight
290-11-503-00
Setting block
113-23-121-00 |outer
|Crimp nail cleat 113-23-196-00 |inner
Aluminium spring cleat
Alignment corner
125-23-196-00 |inner
180-25-010-00 |outer
V1/2011
1:1|Profiles1:1
M11551
180-25-016-00
66
33
110-05-156-00
130-05-156-00
180-19-000-00
65,1
84
290-11-502-00
180-20-010-03
113-13-274-00
125-13-274-00
44
Alignment corner
43
113-15-156-00
180-19-000-00
65,1
84
290-11-502-00
180-20-010-03
113-23-270-00
125-23-270-00
V1/2011
180-19-000-00 |outer
180-25-016-00 |outer
180-20-010-03 |inner
M11573
180-25-016-00
76
54
European Groove
Chamfered sash for European Groove mechanism
463 mm
External perimeter
95 mm
Primary perimeter
x-x
49,24 cm4
Moment of inertia x-x
y-y
10,69 cm4
Moment of inertia y-y
1655 gr/m
Weight
290-11-502-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
European Groove
Chamfered sash for European Groove mechanism
483 mm
External perimeter
116 mm
Primary perimeter
x-x
56,17 cm4
Moment of inertia x-x
y-y
19,32 cm4
Moment of inertia y-y
1821 gr/m
Weight
290-11-502-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-270-00 |inner
Aluminium spring cleat
125-23-270-00 |inner
Alignment corner
180-19-000-00 |outer
180-25-016-00 |outer
180-20-010-03 |inner
45
M11530
66
33,2
180-25-150-00
110-05-156-00
130-05-156-00
84
72,5
290-11-501-00
113-13-274-00
180-20-010-03
125-13-274-00
44
76
M11534
43
180-25-150-00
113-15-156-00
84
72,5
290-11-501-00
113-23-270-00
180-20-010-03
125-23-270-00
54
46
European Groove
Flat sash for European Groove mechanism
423 mm
External perimeter
92 mm
Primary perimeter
x-x
47,10 cm4
Moment of inertia x-x
y-y
8,21 cm4
Moment of inertia y-y
1554 gr/m
Weight
290-11-501-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
180-25-150-00 |outer
Alignment corner
180-20-010-03 |inner
European Groove
Flat sash for European Groove mechanism
442 mm
External perimeter
112 mm
Primary perimeter
x-x
54,26 cm4
Moment of inertia x-x
y-y
15,63 cm4
Moment of inertia y-y
1735 gr/m
Weight
290-11-501-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-270-00 |inner
Aluminium spring cleat
Alignment corner
125-23-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
V1/2011
1:1|Profiles1:1
M11538
96
63,2
113-33-156-00
180-25-150-00
84
72,5
290-11-501-00
113-43-270-00
180-20-010-03
European Groove|Flat sash for opening
inward entrance door for European Groove mechanism
482 mm
External perimeter
152 mm
Primary perimeter
x-x
68,51 cm4
Moment of inertia x-x
y-y
42,72 cm4
Moment of inertia y-y
2119 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00
74
125-43-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
M11540
66
33,2
110-05-156-00
130-05-156-00
180-25-017-00
72,5
84
290-11-501-00
180-20-010-03
113-13-274-00
125-13-274-00
44
V1/2011
European Groove
Round sash for European Groove mechanism
436 mm
External perimeter
88 mm
Primary perimeter
x-x
48,12 cm4
Moment of inertia x-x
y-y
9,25 cm4
Moment of inertia y-y
1602 gr/m
Weight
290-11-501-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
180-25-017-00 |outer
Alignment corner
180-20-010-03 |inner
47
76
M11544
43,2
113-15-156-00
180-25-017-00
72,5
84
290-11-501-00
180-20-010-03
113-23-270-00
125-23-270-00
54
63,2
113-33-156-00
180-25-017-00
72,5
84
290-11-501-00
113-43-270-00
125-43-270-00
74
48
Aluminium spring cleat
Alignment corner
125-23-270-00 |inner
180-25-017-00 |outer
180-20-010-03 |inner
M11548
96
180-20-010-03
European Groove
Round sash for European Groove mechanism
455 mm
External perimeter
108 mm
Primary perimeter
x-x
55,05 cm4
Moment of inertia x-x
y-y
4
17,21 cm
Moment of inertia y-y
1768 gr/m
Weight
290-11-501-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-270-00 |inner
European Groove|Round sash for opening
inward entrance door for European Groove mechanism
493 mm
External perimeter
148 mm
Primary perimeter
x-x
69,19 cm4
Moment of inertia x-x
y-y
45,53 cm4
Moment of inertia y-y
2163 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
125-43-270-00 |inner
Aluminium spring cleat
180-25-017-00 |outer
Alignment corner
180-20-010-03 |inner
V1/2011
1:1|Profiles1:1
M11820
180-25-016-00
66
33
110-05-156-00
130-05-156-00
180-19-000-00
72,5
91,4
290-11-502-00
180-20-010-03
113-13-345-00
125-13-346-00
44
180-20-006-00
European Groove
Chamfered sash for European Groove mechanism
504 mm
External perimeter
101 mm
Primary perimeter
x-x
63,47 cm4
Moment of inertia x-x
y-y
12,91 cm4
Moment of inertia y-y
1791 gr/m
Weight
290-11-502-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-13-345-00 |inner
|Crimp nail cleat
125-13-346-00 |inner
Aluminium spring cleat
180-19-000-00 |outer
180-25-016-00 |outer
Alignment corner
180-20-010-03 |inner
180-20-006-00 |inner
180-25-016-00
M11824
76
43
113-15-156-00
180-19-000-00
72,5
91,4
290-11-502-00
180-20-010-03
113-23-345-00
125-23-345-00
54
180-20-006-00
V1/2011
European Groove
Chamfered sash for European Groove mechanism
524 mm
External perimeter
121 mm
Primary perimeter
x-x
71,70 cm4
Moment of inertia x-x
y-y
22,52 cm4
Moment of inertia y-y
1952 gr/m
Weight
290-11-502-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-345-00 |inner
Aluminium spring cleat
125-23-345-00 |inner
Alignment corner
180-19-000-00 |outer
180-25-016-00 |outer
180-20-010-03 |inner
180-20-006-00 |inner
49
M11828
96
63
113-33-156-00
180-19-000-00
72,5
91,4
290-11-502-00
180-20-010-03
113-13-345-00
125-13-346-00
74
180-20-006-00
M11550
76
43
110-05-156-00
130-05-156-00
98,9
180-25-008-00
72,5
290-11-501-00
180-20-010-03
113-23-270-00
125-23-270-00
54
50
European Groove|Chamfered sash for opening
inward entrance door for European Groove mechanism
564 mm
External perimeter
161 mm
Primary perimeter
x-x
87,50 cm4
Moment of inertia x-x
y-y
54,83 cm4
Moment of inertia y-y
2335 gr/m
Weight
290-11-502-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-345-00 |inner
125-23-345-00 |inner
Aluminium spring cleat
180-19-000-00 |outer
180-25-016-00 |outer
Alignment corner
180-20-010-03 |inner
180-20-006-00 |inner
1851 gr/m
Weight
290-11-501-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-23-270-00 |inner
|Crimp nail cleat
125-23-270-00 |inner
Aluminium spring cleat
180-25-008-00 |outer
Alignment corner
180-20-010-03 |inner
V1/2011
1:1|Profiles1:1
110
77
180-19-000-00
113-38-121-00
+113-11-121-00
98,9
180-25-008-00
72,5
290-11-501-00
113-57-270-00
180-20-010-03
125-23-270-00
+113-15-270-00
+113-19-267-00
88
M11898
classic
European Groove|Classic sash for opening
inward entrance door for European Groove mechanism
561 mm
External perimeter
147 mm
Primary perimeter
x-x
87,48 cm4
Moment of inertia x-x
y-y
73,18 cm4
Moment of inertia y-y
2538 gr/m
Weight
290-11-501-00
Setting block
113-38-121-00
+113-11-121-00 |outer
|Crimp nail cleat
113-57-270-00 |inner
125-23-270-00
+113-15-270-00 |inner
+113-19-267-00
Aluminium spring cleat
180-19-000-00 |outer
180-25-008-00 |outer
Alignment corner
180-20-010-03 |inner
V1/2011
51
M11717
43
110-05-156-00
130-05-156-00
107,4
180-25-008-00
72,5
290-11-501-00
113-23-270-00
125-23-270-00
1983 gr/m
Weight
290-11-501-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-23-270-00 |inner
|Crimp nail cleat
125-23-270-00 |inner
Aluminium spring cleat
180-25-008-00 |outer
Alignment corner
54
76
43,2
M11716
113-15-156-00
180-25-017-00
72,5
92,5
290-11-501-00
113-23-270-00
125-23-270-00
European Groove
Round sash for European Groove mechanism
464 mm
External perimeter
125 mm
Primary perimeter
x-x
69,52 cm4
Moment of inertia x-x
y-y
21,10 cm4
Moment of inertia y-y
1900 gr/m
Weight
290-11-501-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-270-00 |inner
Aluminium spring cleat
Alignment corner
125-23-270-00 |inner
180-25-017-00 |outer
54
52
V1/2011
1:1|Profiles1:1
76
43
M11744
113-15-156-00
72,5
84
180-25-017-00
180-20-010-03
113-23-196-00
European Groove
Round sash for European Groove mechanism
514 mm
External perimeter
108 mm
Primary perimeter
x-x
54,66 cm4
Moment of inertia x-x
y-y
16,27 cm4
Moment of inertia y-y
1776 gr/m
Weight
113-15-156-00 |outer
|Crimp nail cleat 113-23-196-00 |inner
180-25-017-00 |outer
Alignment corner
180-20-010-03 |inner
54
M11630
76
180-20-010-03
180-25-027-00
113-23-251-00
125-23-251-00
72,5
84
290-11-501-00
113-13-156-00
21
V1/2011
European Groove|Round sash for opening outward
for European Groove mechanism
459 mm
External perimeter
107 mm
Primary perimeter
x-x
52,12 cm4
Moment of inertia x-x
y-y
17,03 cm4
Moment of inertia y-y
1741 gr/m
Weight
290-11-501-00
Setting block
113-23-251-00 |outer
|Crimp nail cleat 113-13-156-00 |inner
Aluminium spring cleat
Alignment corner
125-23-251-00 |outer
180-25-027-00 |outer
180-20-010-03 |outer
53
M11690
96
113-43-251-00
180-20-010-03
125-43-251-00
180-25-027-00
72,5
84
290-11-501-00
European Groove|Round sash for opening
outward entrance door for European Groove mechanism
498 mm
External perimeter
148 mm
Primary perimeter
x-x
65,90 cm4
Moment of inertia x-x
y-y
44,58 cm4
Moment of inertia y-y
2104 gr/m
Weight
290-11-501-00
Setting block
113-43-251-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
Aluminium spring cleat
Alignment corner
113-33-156-00
41
125-43-251-00 |inner
180-25-027-00 |outer
180-20-010-03 |outer
96,1
M11890
113-43-326-00
180-20-006-00
125-43-326-00
72,5
91,4
180-19-000-00
113-33-156-00
European Groove|Chamfered sash for opening
outward entrance door for European Groove mechanism
570 mm
External perimeter
161 mm
Primary perimeter
x-x
81,38 cm4
Moment of inertia x-x
y-y
51,65 cm4
Moment of inertia y-y
2219 gr/m
Weight
113-43-326-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
Aluminium spring cleat
Alignment corner
125-43-326-00 |outer
180-19-000-00 |outer
180-20-006-00 |outer
41,1
54
V1/2011
1:1|Profiles1:1
M11730
66
33
110-05-156-00
180-25-150-00
130-05-156-00
80
84
290-11-501-00
180-20-010-03
113-13-274-00
125-13-274-00
44
11590
Sash divide only with M11590 transom
European Groove
Flat sash for European Groove mechanism
422 mm
External perimeter
85 mm
Primary perimeter
x-x
47,23 cm4
Moment of inertia x-x
y-y
8,20 cm4
Moment of inertia y-y
1563 gr/m
Weight
290-11-501-00
Setting block
110-05-156-00 |outer
Crimp cleat
130-05-156-00 |outer
Nail cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
180-25-150-00 |outer
Alignment corner
180-20-010-03 |inner
76
43
M11934
180-25-150-00
113-15-156-00
80
84
290-11-501-00
180-20-010-03
113-23-270-00
125-23-270-00
54
11590
Sash divide only with M11590 transom
V1/2011
European Groove
Flat sash for European Groove mechanism
442 mm
External perimeter
106 mm
Primary perimeter
x-x
54,28 cm4
Moment of inertia x-x
y-y
15,72 cm4
Moment of inertia y-y
1733 gr/m
Weight
290-11-501-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-270-00 |inner
Aluminium spring cleat
Alignment corner
125-23-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
55
96
63
113-33-156-00
M11938
180-25-150-00
80
84
290-11-501-00
113-43-270-00
180-20-010-03
125-43-270-00
74
11590
Sash divide only with M11590 transom
96,1
125-43-251-00
80
84
290-11-501-00
113-33-156-00
41,1
11590
Sash divide only with M11590 transom
56
Aluminium spring cleat
Alignment corner
125-43-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
M11893
113-43-251-00
180-20-010-03
European Groove|Flat sash for opening
inward entrance door for European Groove mechanism
482 mm
External perimeter
146 mm
Primary perimeter
x-x
68,57 cm4
Moment of inertia x-x
y-y
43,05 cm4
Moment of inertia y-y
2127 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
European Groove|Flat sash for opening
outward entrance door for European Groove mechanism
586 mm
External perimeter
145 mm
Primary perimeter
x-x
66,00 cm4
Moment of inertia x-x
y-y
42,38 cm4
Moment of inertia y-y
2085 gr/m
Weight
290-11-501-00
Setting block
113-43-251-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
Aluminium spring cleat
Alignment corner
125-43-251-00 |outer
180-20-010-03 |outer
V1/2011
1:1|Profiles1:1
M11552
180-25-016-00
96
63
113-33-156-00
A 180-19-000-00
65,1
91,4
290-11-502-00
113-43-270-00
180-20-010-03
125-43-270-00
74
70
165-11-002-00
160-11-813-91
76,5
72,5
290-11-503-00
165-20-130-00
160-11-213-91
V1/2011
Aluminium spring cleat
125-43-270-00 |inner
Alignment corner
180-19-000-00 |outer
180-25-016-00 |outer
180-20-010-03 |inner
M11562
165-11-001-00
26
European Groove|Chamfered sash for opening
inward entrance door for European Groove mechanism
523 mm
External perimeter
156 mm
Primary perimeter
x-x
69,66 cm4
Moment of inertia x-x
y-y
48,76 cm4
Moment of inertia y-y
2199 gr/m
Weight
290-11-502-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
|Flat transom-mullion
486 mm
External perimeter
104 mm
Primary perimeter
x-x
38,90 cm4
Moment of inertia x-x
y-y
8,75 cm4
Moment of inertia y-y
1464 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
57
80
165-11-002-00
M11564
165-11-001-00
160-11-823-91
76,5
72,5
290-11-503-00
165-20-230-00
160-11-223-91
36
90
165-11-002-00
M11566
160-11-833-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-330-00
160-11-233-91
46
58
|Flat transom-mullion
506 mm
External perimeter
124 mm
Primary perimeter
x-x
45,42 cm4
Moment of inertia x-x
y-y
16,55 cm4
Moment of inertia y-y
1665 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-230-00 |inner
160-11-823-91 |outer
Aluminium
160-11-223-91 |inner
transom-mullion cleat
|Flat transom-mullion
527 mm
External perimeter
144 mm
Primary perimeter
x-x
50,87 cm4
Moment of inertia x-x
y-y
27,93 cm4
Moment of inertia y-y
1833 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
V1/2011
1:1|Profiles1:1
90
165-11-002-00
160-11-833-91
M11766
165-11-001-00
72,5
76,5
290-11-503-00
46
|Flat transom-mullion
528 mm
External perimeter
144 mm
Primary perimeter
x-x
53,26 cm4
Moment of inertia x-x
y-y
28,64 cm4
Moment of inertia y-y
1919 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-833-91 |outer
Aluminium
transom-mullion cleat
90
M11770
165-11-002-00
165-11-001-00
72,5
76,5
290-11-503-00
|Flat transom-mullion
528 mm
External perimeter
144 mm
Primary perimeter
x-x
55,86 cm4
Moment of inertia x-x
y-y
29,56 cm4
Moment of inertia y-y
2036 gr/m
Weight
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
290-11-503-00
Setting block
46
V1/2011
59
95
165-11-002-00
160-11-838-91
165-11-001-00
72,5
76,5
290-11-503-00
160-11-238-91
51
M11726
|Flat transom-mullion
538 mm
External perimeter
154 mm
Primary perimeter
x-x
53,87 cm4
Moment of inertia x-x
y-y
35,19 cm4
Moment of inertia y-y
1923 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-838-91 |outer
Aluminium
160-11-238-91 |inner
transom-mullion cleat
60
V1/2011
1:1|Profiles1:1
118
165-11-002-00
160-11-861-91
165-11-001-00
72,5
76,5
290-11-503-00
160-11-261-91
74
M11886
|Flat transom-mullion
583 mm
External perimeter
200 mm
Primary perimeter
x-x
67,60 cm4
Moment of inertia x-x
y-y
82,68 cm4
Moment of inertia y-y
2348 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-861-91 |outer
Aluminium
160-11-261-91 |inner
transom-mullion cleat
V1/2011
61
132
165-11-002-00
160-11-875-91
165-11-001-00
72,5
76,5
290-11-503-00
160-11-275-91
88
M11888
|Flat transom-mullion
612 mm
External perimeter
228 mm
Primary perimeter
x-x
75,98 cm4
Moment of inertia x-x
y-y
124,48 cm4
Moment of inertia y-y
2605 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-875-91 |outer
Aluminium
160-11-275-91 |inner
transom-mullion cleat
62
V1/2011
1:1|Profiles1:1
150
165-11-002-00
160-11-823-91 160-11-823-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-230-00 165-20-230-00
160-11-223-91 160-11-223-91
106
M11568
|Flat transom-mullion
645 mm
External perimeter
264 mm
Primary perimeter
x-x
90,73 cm4
Moment of inertia x-x
y-y
201,22 cm4
Moment of inertia y-y
3077 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-230-00 |inner
160-11-823-91 |outer
Aluminium
160-11-223-91 |inner
transom-mullion cleat
V1/2011
63
10%|Miniaturization 10%
165-11-001-00
200
160-11-870-91
160-11-870-91
290-11-503-00
160-11-270-91
72,5
76,5
165-11-002-00
160-11-270-91
156
M11570
|Flat transom-mullion
750 mm
External perimeter
364 mm
Primary perimeter
x-x
498,20 cm4
Moment of inertia x-x
y-y
120,93 cm4
Moment of inertia y-y
3990 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-870-91 |outer
Aluminium
160-11-270-91 |inner
transom-mullion cleat
64
V1/2011
1:1|Profiles1:1
70
M11862
91,4
160-11-813-91
72,5
290-11-503-00
160-11-213-91
|Chamfered transom-mullion
583 mm
External perimeter
125 mm
Primary perimeter
x-x
58,57 cm4
Moment of inertia x-x
y-y
13,38 cm4
Moment of inertia y-y
1671 gr/m
Weight
290-11-503-00
Setting block
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
26
90
M11866
91,4
160-11-833-91
72,5
290-11-503-00
160-11-233-91
|Chamfered transom-mullion
623 mm
External perimeter
165 mm
Primary perimeter
x-x
73,86 cm4
Moment of inertia x-x
y-y
36,65 cm4
Moment of inertia y-y
2035 gr/m
Weight
290-11-503-00
Setting block
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
46
V1/2011
65
90
160-11-833-91
165-11-001-00
119,6
165-11-002-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11722
|Flat transom-mullion
616 mm
External perimeter
230 mm
Primary perimeter
x-x
134,89 cm4
Moment of inertia x-x
y-y
43,85 cm4
Moment of inertia y-y
2468 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
66
V1/2011
1:1|Profiles1:1
165-11-002-00
160-11-833-91
165-11-001-00
126,5
90
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11874
|Flat transom-mullion
629 mm
External perimeter
244 mm
Primary perimeter
x-x
133,40 cm4
Moment of inertia x-x
y-y
41,56 cm4
Moment of inertia y-y
2369 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
V1/2011
67
165-11-002-00
160-11-833-91
139,6
90
165-11-001-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11732
|Flat transom-mullion
656 mm
External perimeter
270 mm
Primary perimeter
x-x
195,34 cm4
Moment of inertia x-x
y-y
49,71 cm4
Moment of inertia y-y
2630 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
68
V1/2011
1:1|Profiles1:1
90
160-11-833-91
165-11-001-00
122,5
165-11-002-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11688
|Round transom-mullion
609 mm
External perimeter
206 mm
Primary perimeter
x-x
124,76 cm4
Moment of inertia x-x
y-y
46,85 cm4
Moment of inertia y-y
2465 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
V1/2011
69
165-11-002-00
160-11-833-91
165-11-001-00
141,5
90
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11578
|Flat transom-mullion
645 mm
External perimeter
243 mm
Primary perimeter
x-x
174,17 cm4
Moment of inertia x-x
y-y
51,98 cm4
Moment of inertia y-y
2622 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
70
V1/2011
1:1|Profiles1:1
90
M11778
165-11-002-00
160-11-833-91
165-11-001-00
72,5
89,4
290-11-503-00
165-20-330-00
160-11-233-91
|Round transom-mullion
539 mm
External perimeter
155 mm
Primary perimeter
x-x
71,99 cm4
Moment of inertia x-x
y-y
39,67 cm4
Moment of inertia y-y
2131 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
46
80
165-11-002-00
165-11-001-00
160-11-823-91
84
80
290-11-503-00
165-20-230-00
160-11-223-91
36
84mm
Divides only 84mm width sashes
V1/2011
M11590
|Flat transom-mullion
523 mm
External perimeter
124 mm
Primary perimeter
x-x
55,71 cm4
Moment of inertia x-x
y-y
17,03 cm4
Moment of inertia y-y
1747 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-230-00 |inner
160-11-823-91 |outer
Aluminium
160-11-223-91 |inner
transom-mullion cleat
71
65,4
M11658
72,5
79,8
300-11-658-00
1497 gr/m
Weight
300-11-658-00
End cap
32,8
65,4
M11758
72,5
87,3
300-11-758-03
European Groove|Round
sash invertion profile for European Groove mechanism
510 mm
External perimeter
68 mm
Primary perimeter
x-x
43,48 cm4
Moment of inertia x-x
y-y
11,49 cm4
Moment of inertia y-y
1565 gr/m
Weight
300-11-758-03
End cap
32,8
72
V1/2011
1:1|Profiles1:1
80,7
63,4
135O
M11592
ngulation construction profile
289 mm
External perimeter
64 mm
Primary perimeter
x-x
26,00 cm4
Moment of inertia x-x
y-y
8,05 cm4
Moment of inertia y-y
1154 gr/m
Weight
V1/2011
73
93,7
74,7
135O
M11594
Round angulation construction profile
329 mm
External perimeter
74 mm
Primary perimeter
x-x
41,32 cm4
Moment of inertia x-x
y-y
14,19 cm4
Moment of inertia y-y
1306 gr/m
Weight
74
V1/2011
1:1|Profiles1:1
112,9
129,8
90O
M11596
Round angulation construction profile
414 mm
External perimeter
166 mm
Primary perimeter
x-x
80,86 cm4
Moment of inertia x-x
y-y
81,51 cm4
Moment of inertia y-y
1970 gr/m
Weight
V1/2011
75
62,8
108,8
90O
M11600
Flat angulation construction profile
334 mm
External perimeter
116 mm
Primary perimeter
x-x
22,94 cm4
Moment of inertia x-x
y-y
44,14 cm4
Moment of inertia y-y
1624 gr/m
Weight
76
V1/2011
1:1|Profiles1:1
107,6
108,8
90O
M11790
ngulation construction profile
371 mm
External perimeter
153 mm
Primary perimeter
x-x
55,95 cm4
Moment of inertia x-x
y-y
48,24 cm4
Moment of inertia y-y
1784 gr/m
Weight
M11116
15
20,6
310-11-116-XX
16,2
V1/2011
|Waterproofing profile
93 mm
External perimeter
28 mm
Primary perimeter
x-x
0,28 cm4
Moment of inertia x-x
y-y
0,15 cm4
Moment of inertia y-y
184 gr/m
Weight
310-11-116-XX
End cap
77
12,3
11,7
33,6
M11995
M11621
|Beauty profile
74 mm
External perimeter
0 mm
Primary perimeter
x-x
0,02 cm4
Moment of inertia x-x
y-y
0,09 cm4
Moment of inertia y-y
98 gr/m
Weight
78
13,8
9,2
14,2
9,3
|Beauty profile
126 mm
External perimeter
67 mm
Primary perimeter
x-x
0,32 cm4
Moment of inertia x-x
y-y
1,30 cm4
Moment of inertia y-y
464 gr/m
Weight
M11057
|Beauty profile
59 mm
External perimeter
0 mm
Primary perimeter
x-x
0,02 cm4
Moment of inertia x-x
y-y
0,10 cm4
Moment of inertia y-y
101 gr/m
Weight
V1/2011
1:1|Profiles1:1
15,9
20
310-09-317-XX
21
26,7
M11447
10,3
M9317
|Beauty profile
93 mm
External perimeter
25 mm
Primary perimeter
x-x
0,32 cm4
Moment of inertia x-x
y-y
0,06 cm4
Moment of inertia y-y
148 gr/m
Weight
|Waterproofing profile
85 mm
External perimeter
29 mm
Primary perimeter
x-x
0,12 cm4
Moment of inertia x-x
y-y
0,30 cm4
Moment of inertia y-y
180 gr/m
Weight
310-09-317-XX
End cap
23
97
M11504
V1/2011
|Beauty profile
250 mm
External perimeter
100 mm
Primary perimeter
x-x
38,46 cm4
Moment of inertia x-x
y-y
1,82 cm4
Moment of inertia y-y
1152 gr/m
Weight
79
M11623
113-13-117-00
76,5
160-11-813-91
113-13-196-00
125-13-196-00
160-11-213-91
26
1168 gr/m
Weight
113-13-117-00 |outer
|Crimp nail cleat 113-13-196-00 |inner
Aluminium spring cleat
Aluminium
transom-mullion cleat
125-13-196-00 |inner
160-11-813-91 |outer
160-11-213-91 |inner
M11622
113-33-121-00
76,5
160-11-833-91
113-33-196-00
125-33-196-00
160-11-233-91
46
80
1530 gr/m
Weight
113-33-121-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Aluminium
transom-mullion cleat
125-33-196-00 |inner
160-11-833-91 |outer
160-11-233-91 |inner
V1/2011
1:1|Profiles1:1
13,3
11,2
31,8
180-19-000-00
117,6
117,6
140-00-219-00
42,38
9379
|Two pieces frame
363 mm
External perimeter
197 mm
Primary perimeter
x-x
78,31 cm4
Moment of inertia x-x
y-y
11,21 cm4
Moment of inertia y-y
1445 gr/m
Weight
140-00-219-00 |outer
|Cast spring cleat
180-19-000-00 |outer
Alignment corner
V1/2011
9381
|Beauty profile
264 mm
External perimeter
140 mm
Primary perimeter
x-x
50,38 cm4
Moment of inertia x-x
y-y
0,88 cm4
Moment of inertia y-y
1036 gr/m
Weight
81
33
42,8
180-11-118-00
M11118
|Trimming profile
185 mm
External perimeter
54 mm
Primary perimeter
x-x
0,82 cm4
Moment of inertia x-x
y-y
2,79 cm4
Moment of inertia y-y
324 gr/m
Weight
180-11-118-00
Alignment corner
38
42,8
180-11-119-00
M11119
|Trimming profile
196 mm
External perimeter
59 mm
Primary perimeter
x-x
1,11 cm4
Moment of inertia x-x
y-y
3,29 cm4
Moment of inertia y-y
379 gr/m
Weight
180-11-119-00
Alignment corner
82
V1/2011
European Groove ( )
European Groove Mechanism (visible sash)
|Basic Typologies
V1/2011
83
One sash
casement
window
One sash casement window
B
B
3
A
B
4
A
5
A
-
One sash tilt &
casement window
with fixed
Two sash
casement
window
8
84
One sash casement
window opening outward
9
V1/2011
European Groove ( )
European Groove Mechanism (visible sash)
1:2|Sections 1:2
V1/2011
85
1
A
Fw
2.|pieces
Frame height
Fh
2.|pieces
GBWop=Fw-2X
Height opening for glazing bead
GBHop=Fh-2X
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
|Accessory cuttings
Description
Accessory
Code Nr
Frame crimp cleats
According to the frame
Frame alignment corners
According to the frame
202-11-151-01
Outer glazing gasket
Inner glazing gasket
According to the glazing width
290-11-503-00
Setting block
290-00-005-00
Setting block
Quantity
4.|pieces
4.|pieces
2Fw+2Fh
|Meters
2Fw+2Fh
|Meters
2.|pieces
202-11-151-01
290-00-005-00
290-11-503-00
X
Width opening for glazing bead
GBHop
Frame width
Fh
|Profile cuttings
2.|pieces
GBWop
Fw
86
V1/2011
1:2|Sections 1:2
|One sash casement window
|Profile cuttings
|Frame width
Fw
2.|pieces
|Frame height
Fh
2.|pieces
|Sash width
Sw=Fw-2X+12mm
2.|pieces
|Sash height
Sh=Fh-2X+12mm
2.|pieces
|Waterproofing profile
Wd=Fw-2X-59mm
1.|piece
Width opening for glazing bead
Height opening for glazing bead
|Glazing width
M11814, M11818
GBHop=Sh-2Y
Gw=GBWop-14mm
Waterproofing profile
Sh=Fh-40mm
Wd=Fw-111mm
Sw=Fw-60mm
Sh=Fh-60mm
Wd=Fw-131mm
Sw=Fw-80mm
Sh=Fh-80mm
Wd=Fw-151mm
Sw=Fw-101mm
Sh=Fh-101mm
Wd=Fw-172mm
: . 290
Note: Details about the glazing bead cutting in page 290
310-11-116-XX
According to the sash
290-00-005-00
V1/2011
|Vulcanized corner
for central seal gasket
290-00-005-00
M11116
Quantity
220-11-001-01
6
4.|pieces
220-11-002-01
4.|pieces
|Accessory cuttings
Description
Accessory
Code Nr
Frame crimp cleats
According to the frame
Frame alignment corners
According to the frame
Sash crimp nail cleats
According to the sash
Sash alignment corners
According to the sash
202-11-151-01
Outer glazing gasket
According to the glazing width
Inner glazing gasket
220-11-002-01
Seal gasket
220-11-001-01
Seal gasket
210-11-500-01
Central seal gasket
GBHop
Sh
Fh
202-11-151-01
Gh=GBHop-14mm
Sash height
255-11-500-01
210-11-500-01
GBWop=Sw-2Y
|Glazing height
Sash width
For frame
M11508, M11526
Sw=Fw-40mm
M11510, M11516
M11520, M11649
M11705
M11514, M11518
M11528, M11668
4.|pieces
4.|pieces
2Sw+2Sh
|Meters
2Sw+2Sh
|Meters
2Sw+2Sh
|Meters
2Fw+2Sh
|Meters
2Fw+2Sh
|Meters
310-11-116-XX
Wd
4.|pieces
|End cap
2.|pieces
for waterproofing profile
4 (2 5)
2 (3 4)
|Sash setting block
.|pieces
4 (2 5)
2 (3 4)
Setting block
.|pieces
GBWop
Sw
Fw
87
B
6
End cap for sash invertion profile
210-11-500-01
Ap
Gh
GBHop
Sh
Fh
34,8
202-11-151-01
290-00-005-00
M11116
220-11-001-01
220-11-002-01
310-11-116-XX
M11658
OR M11758
Wd
Wd
6
X
88
End cap for sash invertion profile
Gw
GBWop
Sw
Wd1
Y
Fw
Gw
GBWop
Sw
V1/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
Code Nr
Fw
Fh
Sw=Fw/2-X+3,5mm
Sh=Fh-2X+12mm
|Accessory cuttings
Description
Accessory
2.|pieces
2.|pieces
4.|pieces
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
According to the glazing width Inner glazing gasket
4Sw+4Sh
|Meters
4.|pieces
202-11-151-01
M11116|M11116
waterproofing profile
M11116|M11116
waterproofing profile
Ap=Sh-69,6mm
1.|piece
Wd=Fw/2-X-67,5mm
1 .|piece
(M11658)
2 .|pieces
(M11758)
Wd1=Fw/2-X-1,5mm
1 .|piece
(M11658)
0 .|pieces
(M11758)
Width opening for
glazing bead
GBWop=Sw-2Y
Height opening for
glazing bead
GBHop=Sh-2Y
Glazing width
Glazing height
Gw=GBWop-14mm
V1/2011
220-11-002-01
Seal gasket
4Sw+4Sh
|Meters
220-11-001-01
Seal gasket
2Fw+3Fh
|Meters
210-11-500-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
End cap for sash
invertion profile
1 |pair
End cap for
waterproofing profile
4.|pieces
8.|pieces
Setting block
8.|pieces
According to the sash
invertion profile
310-11-116-XX
According to the sash
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
Quantity
290-00-005-00
89
-
One sash tilt & casement
window with fixed
C
7
B
X
210-11-500-01
Gh1
GBHop
Sh
Fh
Gh2
GBHop
Fh
202-11-151-01
290-00-005-00
M11116
220-11-001-01
290-11-503-00
X
220-11-002-01
310-11-116-XX
Wd
6
X
Gw1
GBWop
Sw
Xt
Y
Gw2
GBWFop
Tw
Fw
90
V1/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
M11116|M11116
waterproofing profile
Fw
Fh
Sw=Fw-Tw-X-Xt/2+12mm
Sh=Fh-2X+12mm
Wd=Fw-Tw-X-Xt/2-59mm
2.|pieces
Code Nr
|Accessory cuttings
Description
Accessory
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
4.|pieces
According to the sash
Sash alignment
corners
4.|pieces
2.|pieces
2.|pieces
2.|pieces
1.|piece
202-11-151-01
Transom-mullion
cutting
T=Fh-2X+9mm
()
Width opening for
glazing bead (sash)
Quantity
2Sw+2Sh+2Tw+2Fh
Outer glazing gasket
|Meters
According to the glazing width
Inner glazing
gasket
2Sw+2Sh+2Tw+2Fh
|Meters
GBWop=Sw-2Y
220-11-002-01
Seal gasket
2Sw+2Sh
|Meters
()
Height opening for
glazing bead (sash)
GBHop=Sh-2Y
220-11-001-01
Seal gasket
2(Fw-Tw)+2Fh
|Meters
()
Width opening for
glazing bead (frame)
GBWFop=Tw-X-Xt/2
210-11-500-01
Central seal gasket
2(Fw-Tw)+2Fh
|Meters
()
Height opening for
glazing bead (frame)
GBHFop=Fh-2X
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
310-11-116-XX
End cap for
waterproofing profile
2.|pieces
Transom-mullion
cleat
2.|pieces
2.|pieces
4.|pieces
Setting block
6.|pieces
Glazing width
Glazing height
1.|piece
Gw1=GBWop-14mm
Gh1=GBHop-14mm
According to the
transom-mullion
290-11-503-00
Glazing width
Glazing height
Gw2=GBWFop-14mm
According to the sash
Gh2=GBHFop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
V1/2011
290-00-005-00
91
B
8
End cap for sash invertion profile
210-11-500-01
Ap
Gh
GBHop
Sh
Fh
34,8
202-11-151-01
290-00-005-00
M11116
220-11-001-01
220-11-002-01
310-11-116-XX
M11658
OR M11758
Wd
Wd
6
X
92
End cap for sash invertion profile
Gw
GBWop
Sw
Wd1
Y
Fw
Gw
GBWop
Sw
V1/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
Code Nr
Fw
Fh
Sw=Fw/2-X+3,5mm
Sh=Fh-2X+12mm
|Accessory cuttings
Description
Accessory
2.|pieces
2.|pieces
4.|pieces
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
According to the glazing width Inner glazing gasket
4Sw+4Sh
|Meters
4.|pieces
202-11-151-01
M11116|M11116
waterproofing profile
M11116|M11116
waterproofing profile
Ap=Sh-69,6mm
1.|piece
Wd=Fw/2-X-67,5mm
1 .|piece
(M11658)
2 .|pieces
(M11758)
Wd1=Fw/2-X-1,5mm
1 .|piece
(M11658)
0 .|pieces
(M11758)
Width opening for
glazing bead
GBWop=Sw-2Y
Height opening for
glazing bead
GBHop=Sh-2Y
Glazing width
Glazing height
Gw=GBWop-14mm
V1/2011
220-11-002-01
Seal gasket
4Sw+4Sh
|Meters
220-11-001-01
Seal gasket
2Fw+3Fh
|Meters
210-11-500-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
End cap for sash
invertion profile
1 |pair
End cap for
waterproofing profile
4.|pieces
8.|pieces
Setting block
8.|pieces
According to the sash
invertion profile
310-11-116-XX
According to the sash
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
Quantity
290-00-005-00
93
B
9
220-11-002-01
Sh
GBHop*
Ah
Fh
220-11-001-01
202-11-151-01
290-00-005-00
M11690
M11890
210-11-500-01
M11694
Sw
94
GBWop*
Aw
Fw
V1/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
2.|pieces
Fw
Frame height
Sw=Fw-2X-49,8mm
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
4.|pieces
2.|pieces
Sash height
Sh=Fh-2X-49,8mm
11694|11694
beauty profile width
Aw=Fh-2X-0,5mm
11694|11694
beauty profile height
Ah=Fh-2X-0,5mm
Glazing bead width
GBWop=Sw-148,2mm
180-25-010-00
Glazing bead height
GBHop=Sh-148,2mm
202-11-151-01
2.|pieces
113-23-121-00
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
Sash width
Sash height
Sw=Fw-101,8mm
Sh=Fh-101,8mm
M11510
M11516
M11520
M11649
M11705
Sw=Fw-121,8mm
Sh=Fh-121,8mm
M11514
M11518
M11528
M11668
Sw=Fw-141,8mm
Sh=Fh-141,8mm
M11814
M11818
Sw=Fw-162,8mm
Sh=Fh-162,8mm
For frame
M11508
M11526
: . 290
Note: Details about the glazing bead cutting in page 290
V1/2011
According to the sash
2.|pieces
2.|pieces
Quantity
According to the frame
2.|pieces
Fh
Sash width
Code Nr
|Accessory cuttings
Description
Accessory
113-23-156-00
Sash alignment
corners
Beauty profile
alignment corner
4.|pieces
2.|pieces
2.|pieces
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
According to the glazing width Inner glazing gasket
2Sw+2Sh
|Meters
220-11-002-01
Seal gasket
2Aw+2Ah
|Meters
220-11-001-01
Seal gasket
2Fw+2Sh
|Meters
210-11-500-01
Central seal gasket
2Fw+2Sh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
290-11-501-00
Setting block
4.|pieces
290-00-005-00
Setting block
4.|pieces
95
96
V1/2011
European Groove ( )
European Groove Mechanism (hidden sash)
1:1|Profiles 1:1
V4/2011
97
M11908
70
113-13-117-00
180-11-408-00
72,5
76,5
290-11-408-00
113-13-196-00
Aluminium spring cleat
Alignment corner
125-13-196-00
26
180-11-408-00
72,5
76,5
290-11-408-00
113-33-196-00
125-33-196-00
46
98
125-13-196-00 |inner
180-11-408-00 |outer
M11978
90
113-33-121-00
1468 gr/m
Weight
290-11-408-00
Setting block
113-13-117-00 |outer
|Crimp nail cleat 113-13-196-00 |inner
1848 gr/m
Weight
290-11-408-00
Setting block
113-33-121-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Alignment corner
125-33-196-00 |inner
180-11-408-00 |outer
V4/2011
1:1|Profiles1:1
M11912
49,5
110-05-076-00
78,6
720-10-964-00
113-13-274-00
125-13-274-00
180-20-010-03
54,9
European Groove
Hidden round sash for European Groove mechanism
393 mm
External perimeter
88 mm
Primary perimeter
x-x
36,15 cm4
Moment of inertia x-x
y-y
7,55 cm4
Moment of inertia y-y
1421 gr/m
Weight
720-10-964-00
Setting block
110-05-076-00 |outer
Crimp cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
180-20-010-03 |inner
Alignment corner
M11926
49,5
110-05-076-00
78,6
720-10-964-00
113-13-274-00
125-13-274-00
180-20-010-03
54,9
V4/2011
European Groove
Hidden flat sash for European Groove mechanism
398 mm
External perimeter
88 mm
Primary perimeter
x-x
37,13 cm4
Moment of inertia x-x
y-y
7,99 cm4
Moment of inertia y-y
1441 gr/m
Weight
720-10-964-00
Setting block
110-05-076-00 |outer
Crimp cleat
113-13-274-00 |inner
|Crimp nail cleat
125-13-274-00 |inner
Aluminium spring cleat
180-20-010-03 |inner
Alignment corner
99
M11994
49,5
110-05-076-00
83
720-10-964-00
113-13-248-00
57,9
European Groove
Hidden flat sash for European Groove mechanism
408 mm
External perimeter
92 mm
Primary perimeter
x-x
64,09 cm4
Moment of inertia x-x
y-y
20,80 cm4
Moment of inertia y-y
2512 gr/m
Weight
720-10-964-00
Setting block
110-05-076-00 |outer
Crimp cleat
113-13-248-00 |inner
|Crimp nail cleat
114
160-11-213-91
M11916
100
290-11-408-00
72,5
76,5
Hidden sash flat transom-mullion
578 mm
External perimeter
148 mm
Primary perimeter
x-x
46,77 cm4
Moment of inertia x-x
y-y
28,09 cm4
Moment of inertia y-y
1701 gr/m
Weight
290-11-408-00
Setting block
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
160-11-213-91
26
V4/2011
1:1|Profiles1:1
134
160-11-833-91
76,5
72,5
290-11-408-00
160-11-233-91
46
M11920
Hidden sash flat transom-mullion
613 mm
External perimeter
188 mm
Primary perimeter
x-x
59,76 cm4
Moment of inertia x-x
y-y
56,75 cm4
Moment of inertia y-y
2103 gr/m
Weight
Setting block
Aluminium
transom-mullion cleat
290-11-408-00
160-11-833-91 |outer
160-11-233-91 |inner
105
300-11-904-00
79,8
M11904
V4/2011
32,8
European
Groove|Flat sash invertion profile for hidden sash for
European Groove mechanism
558 mm
External perimeter
113 mm
Primary perimeter
x-x
45,95 cm4
Moment of inertia x-x
y-y
26,07 cm4
Moment of inertia y-y
1721 gr/m
Weight
300-11-904-00
End cap
101
M11482
26,5
21
|Beauty profile
351 mm
External perimeter
110 mm
Primary perimeter
x-x
0,91 cm4
Moment of inertia x-x
y-y
0,81 cm4
Moment of inertia y-y
1997 gr/m
Weight
40
200-06-860-XX
290-00-002-00
720-10-964-00
19
200-11-912-01
9
102
M11457
|Flat glazing bead
56 mm
External perimeter
18 mm
Primary perimeter
x-x
0,02 cm4
Moment of inertia x-x
y-y
0,15 cm4
Moment of inertia y-y
114 gr/m
Weight
V4/2011
European Groove ( )
European Groove Mechanism (hidden sash)
|Basic Typologies
V4/2011
103
Two sash
casement
window
B
B
5
A
6
B
7
104
8
V4/2011
European Groove ( )
European Groove Mechanism (hidden sash)
1:2|Sections 1:2
V4/2011
105
1
A
X
|Profile cuttings
Fw
2.|pieces
Frame height
Fh
2.|pieces
M11482
M11482 beauty profile width
ADw=Fw-2X-44mm
2.|pieces
M11482
M11482 beauty profile height
ADh=Fh-2X
2.|pieces
Width opening for glazing bead
GBWop=Fw-2X-44mm
Height opening for glazing bead
GBHop=Fh-2X-44mm
Gw=Fw-2X-56mm
Glazing height
Gh=Fh-2X-56mm
Fh
Glazing width
GBHop
Frame width
: . 102
Note: Details about the glazing bead cutting in page 102
202-11-151-01
290-00-005-00
290-11-408-00
M11482
|Accessory cuttings
Description
Quantity
Accessory
Code Nr
4.|pieces
Frame crimp cleats
According to the frame
4.|pieces
180-11-408-00
Frame alignment corner
2Fw+2Fh
202-11-151-01
Outer glazing gasket
|Meters
2Fw+2Fh
Inner glazing gasket
|Meters
According to the glazing width
2.|pieces
290-11-408-00
Setting block
2.|pieces
290-00-005-00
Setting block
GBWop
Fw
106
V4/2011
1:2|Sections 1:2
|Profile cuttings
2.|pieces
|Frame height
Fh
2.|pieces
|Sash width
Sw=Fw-2X+12mm
2.|pieces
|Sash height
Sh=Fh-2X+12mm
2.|pieces
GBw=Sw-106,6mm
2.|pieces
M11457
200-11-912-01
GBh=Sh-75,8mm
2.|pieces
200-06-860-XX
|Glazing width
Gw=Sw-90,6mm
|Glazing height
Gh=Sh-90,6mm
For frame
Sash width
Sash height
M11908
Sw=Fw-40mm
Sh=Fh-40mm
M11978
Sw=Fw-80mm
Sh=Fh-80mm
Sh
M11457
M11457 glazing bead width
M11457
M11457 glazing bead height
GBh
Fw
Fh
|Frame width
: . 102
Note: Details about the glazing bead cutting in page 102
255-11-908-01
Vulcanized corner for
central seal gasket
720-10-964-00
Setting block
290-00-002-00
Setting block
V4/2011
290-00-002-00
Quantity
720-10-964-00
4.|pieces
210-11-908-01
220-11-002-01
4.|pieces
|Accessory cuttings
Description
Accessory
Code Nr
Frame crimp cleats
According to the frame
180-11-408-00
Frame alignment corner
Sash crimp nail cleats
According to the sash
Sash alignment corners
According to the sash
200-06-860-XX
Glazing gasket
200-11-912-01
Outer glazing gasket
220-11-002-01
Seal gasket
210-11-908-01
Central seal gasket
4.|pieces
4.|pieces
2Sw+2Sh
|Meters
2Sw+2Sh
|Meters
2Sw+2Sh
|Meters
2Fw+2Fh
|Meters
4.|pieces
1 (2 5)
2 (3 4)
.|pieces
1 (2 5)
2 (3 4)
.|pieces
6
X
Sw
Fw
107
300-11-904-XX
ISO 7049 st 5,5x19
B
6
57,1
M11457
200-11-912-01
200-06-860-XX
Gh
Sh
Fh
GBh
Ap
M11904
290-00-002-00
720-10-964-00
210-11-908-01
220-11-002-01
300-11-904-XX
Gw
M11904
Gw
6
Sw
Sw
Fw
108
V4/2011
1:2|Sections 1:2
|Profile cuttings
Code Nr
Frame width
Frame height
Sash width
Sash height
M11904
M11904 sash invertion
profile
M11457
M11457 glazing bead
width
M11457
M11457 glazing bead
height
Glazing width
Glazing height
Fw
|Accessory cuttings
Description
Accessory
2.|pieces
4.|pieces
Frame alignment
corner
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
200-06-860-XX
Glazing gasket
4Sw+4Sh
|Meters
200-11-912-01
Outer glazing gasket
4Sw+4Sh
|Meters
220-11-002-01
Seal gasket
4Sw+4Sh
|Meters
210-11-908-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-908-01
Vulcanized corner for
central seal gasket
4.|pieces
300-11-904-XX
11904
End cap for 11904
sash invertion profile
1 |pair
720-10-964-00
Setting block
2.|pieces
290-00-002-00
Setting block
2.|pieces
According to the frame
Fh
Sw=Fw/2-X+3,5mm
Sh=Fh-2X+12mm
Ap=Sh-114,2mm
GBw=Sw-106,6mm
GBh=Sh-75,8mm
2.|pieces
4.|pieces
180-11-408-00
4.|pieces
1.|piece
Quantity
4.|pieces
4.|pieces
Gw=Sw-90,6mm
Gh=Sh-90,6mm
: . 102
Note: Details about the glazing bead cutting in page 102
V4/2011
109
-
One sash tilt & casement
window with fixed
C
7
B
X
M11457
200-11-912-01
Fh
Gh2
GBHop
Gh1
Sh
Fh
GBh
200-06-860-XX
202-11-151-01
290-00-005-00
290-00-002-00
720-10-964-00
290-11-408-00
M11482
210-11-908-01
220-11-002-01
Gw1
Gw2
GBWop
X
Xt
Sw
Tw
Fw
110
V4/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Fw
2.|pieces
Code Nr
|Accessory cuttings
Description
Accessory
4.|pieces
Frame alignment
corner
4.|pieces
According to the sash
4.|pieces
According to the sash
Sash alignment
corners
4.|pieces
200-06-860-XX
Glazing gasket
2Sw+2Sh
|Meters
200-11-912-01
Outer glazing gasket
2Sw+2Sh
|Meters
220-11-002-01
Seal gasket
2Sw+2Sh
|Meters
210-11-908-01
Central seal gasket
2(Fw-Tw)+2Fh
|Meters
255-11-908-01
Vulcanized corner for
central seal gasket
4.|pieces
202-11-151-01
Outer glazing gasket
2Tw+2Fh
M|eters
According to the frame
Fh
2.|pieces
180-11-408-00
Sash width
Sash height
Transom-mullion cutting
Sw=Fw-Tw-X-Xt/2+12mm
Sh=Fh-2X+12mm
T=Fh-2X+9mm
2.|pieces
2.|pieces
1.|piece
M11457
M11457 glazing bead
width
GBw=Sw-106,6mm
M11457
M11457 glazing bead
height
GBh=Sh-75,8mm
2.|pieces
ADw=Tw-X-Xt/2-44mm
2.|pieces
ADh=Fh-2X
2.|pieces
M11482
M11482 beauty
profile width
M11482
M11482 beauty
profile height
Width opening
for glazing bead
Height opening
for glazing bead
Glazing width
Glazing height
Glazing width
Glazing height
2.|pieces
GBWop=Tw-X-Xt/2-44mm
According to the
transom-mullion
Transom-mullion
cleat
2.|pieces
290-11-408-00
2.|pieces
Frame setting block
720-10-964-00
1.|pieces
290-00-002-00
Setting block
1.|piece
290-00-005-00
Setting block
2.|pieces
Gh1=Sh-90,6mm
Gw2=GBWop-12mm
Gh2=GBHop-12mm
: . 102
Note: Details about the glazing bead cutting in page 102
V4/2011
2Tw+2Fh
Inner glazing gasket M|eters
GBHop=Fh-2X-44mm
Gw1=Sw-90,6mm
Quantity
111
300-11-904-XX
ISO 7049 st 5,5x19
B
8
57,1
M11457
200-11-912-01
200-06-860-XX
Gh
Sh
Fh
GBh
Ap
M11904
290-00-002-00
720-10-964-00
210-11-908-01
220-11-002-01
300-11-904-XX
Gw
M11904
Gw
6
Sw
Sw
Fw
112
V4/2011
1:2|Sections 1:2
|Profile cuttings
Code Nr
Frame width
Frame height
Sash width
Sash height
M11904
M11904 sash invertion
profile
M11457
M11457 glazing bead
width
M11457
M11457 glazing bead
height
Glazing width
Glazing height
Fw
|Accessory cuttings
Description
Accessory
2.|pieces
4.|pieces
Frame alignment
corner
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
200-06-860-XX
Glazing gasket
4Sw+4Sh
|Meters
200-11-912-01
Outer glazing gasket
4Sw+4Sh
|Meters
220-11-002-01
Seal gasket
4Sw+4Sh
|Meters
210-11-908-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-908-01
Vulcanized corner for
central seal gasket
4.|pieces
300-11-904-XX
11904
End cap for 11904
sash invertion profile
1 |pair
720-10-964-00
Setting block
2.|pieces
290-00-002-00
Setting block
2.|pieces
According to the frame
Fh
Sw=Fw/2-X+3,5mm
Sh=Fh-2X+12mm
Ap=Sh-114,2mm
GBw=Sw-106,6mm
GBh=Sh-75,8mm
2.|pieces
4.|pieces
180-11-408-00
4.|pieces
1.|piece
Quantity
4.|pieces
4.|pieces
Gw=Sw-90,6mm
Gh=Sh-90,6mm
: . 102
Note: Details about the glazing bead cutting in page 102
V4/2011
113
114
V4/2011
European Groove
European Groove Mechanism
|Milling-Tooling Operations
V4/2011
115
13,2
,5
104
86
10,3
7,2
5,5
10,3
116
V4/2011
|Milling-Tooling Operations
R6,5
|Square machining
70
57
43
21,5
22,5
25
13
11
20
V4/2011
4,5
117
118
V4/2011
European Groove
European Groove Mechanism
|Mechanisms
V4/2011
119
h width 14
700|Sas
1401-1
SW-735
SW -535
width 701-1000: SW-785
701-1000|Sash
1-1400|Sash widht 1001-1400:
100
355-700|Sash
width 355-700:
SW-95
1b
2a
8
SW -535
width 701-1000: SW-785
:
701-1000|Sash
1-1400|Sash widht 1001-1400
100
130kg
80kg
8
SH-G-210
SH/2 -183
3a
5b
4
5a
G-210
SH
6
1
SW
SW/2 -183
8
7
V4/2011
|Mechanisms
A/A
1b
|Code
Sw
|Description
415-15-800-02
415-15-800-03
415-15-800-11
415-16-595-00
415-15-805-00 355-700mm
415-15-806-00 701-1000mm
415-15-807-00 1001-1400mm
2a
415-12-964-00 1401-1700mm
415-15-801-00
|Drawing
/ JET AK8
Locking part T/T for geared handle JET AK8
JET AK8
Locking part for mill-in gear JET AK8
3a
415-15-811-00
415-63-654-00
With the use of this set the wrong operation safety device 415-63-654-00 is not used
415-63-654-00
415-46-551-02
415-46-551-03
415-46-551-11
610-46-553-02
6
610-46-553-03
610-46-553-11
SPACIO RAL9016
Geared handle SPACIO lockable white RAL9016
SPACIO RAL9005
Geared handle SPACIO lockable black RAL9005
SPACIO F1/EV1
Geared handle SPACIO lockable silver F1/EV1
416-72-250-02
416-72-250-06
416-72-250-07
DIRIGENT-F 25mm
Handle DIRIGENT-F with spindle 25mm bronze
416-72-250-11
5b
419-25-530-00
415-96-401-00
415-95-901-00
415-15-808-00
5a
V4/2011
121
1b
1
11
8
2
8
10
SW/2-91
SW
80kg
130kg
8
SH-G-210
SH-G-210
12
SH
8
2
G-164
G-210
1
SW/2 -183
3
2
122
V4/2011
|Mechanisms
A/A
|Code
Sw
|Description
415-15-800-02
415-15-800-03
415-15-800-11
1b
415-16-595-00
415-80-200-00
. JET A8
Locking parts side hung for geared handle JET AK8
415-96-401-00
415-24-531-00
415-46-551-02
415-46-551-03
415-46-551-11
610-46-553-02
SPACIO RAL9016
Geared handle SPACIO lockable white RAL9016
610-46-553-03
SPACIO RAL9005
Geared handle SPACIO lockable black RAL9005
610-46-553-11
SPACIO F1/EV1
Geared handle SPACIO lockable silver F1/EV1
415-41-506-00
|Fixing plate
415-95-901-00
415-30-889-00
10
415-52-900-00
11
415-63-106-00
12
415-13-530-00
V4/2011
|Drawing
123
1b
1
SW
130kg
12
80kg
11
10
8
4
6
min 110
SH
min 158
SH-GIS-125
SH-GIS-132
GIS-213
GIS
GIS-132
9
1
10
9
4
5
6
5
11
12
124
V4/2011
|Mechanisms
A/A
|Code
Sw
|Description
415-15-800-02
415-15-800-03
415-15-800-11
1b
415-16-595-00
415-63-106-00
415-13-530-00
415.45.929.00
2 . JET A8
Locking parts for inactive sash with interior gear JET AK8
415-63-961-00
415-15-803-00
2 . JET A8
Locking parts for inactive sash with rebate shoot bolt JET AK8
416-80-009-00
415-94-160-00
415-15-816-00
10
415-15-818-00
11
415-15-817-00
12
415-15-819-00
V4/2011
|Drawing
125
-
One sash tilt & casement window
4a*
3
Sw-631
4
Sw-345
Sw(375-554)
Sw-485
Sw(555-1700)
8
8a*
4a*
8b*
4a*
5b*
5a*
SH-G-216
Sh-G-284
Sh/2-162
9a*
6*
4a*
43
7*
G-237
10*
G-186
1a*
8a* 8b*
Sw/2-125
4
4
126
4a*
4a*
*|Optional
V4/2011
|Mechanisms
A/A
|Code
390-50-020-00
Sw
1a* 390-50-210-00
|Description
Quantity
"
Basic locking kit with "MUSHROOM" Head thumb turn
375-554mm
300-00-460-00 555-1700mm
300-00-501-00 1200-1700mm
390-50-110-00
""
Additional horizontal - vertical lock with "MUSHROOM" head thumb turn
390-00-300-00
2
4a* 390-50-241-00
380-50-101-02
380-50-102-03
380-50-119-11
"GLOBO"
"GLOBO" tilt and turn cremone bolt anodized EV1
380-50-113-02
5a* 380-50-114-03
380-50-901-11
390-00-123-00
380-50-121-02
380-50-122-03
350-50-401-02
350-05-402-03
350-50-401-09
350-50-402-11
350-50-501-02
350-50-502-03
350-50-503-11
130 kgr RAL 9006|Pair of hinges 130 kgr silver RAL 9006
350-50-502-11
390-50-220-02
70 kgr
Pair of adjustable hinges 70 kgr white
390-50-220-03
70 kgr
Pair of adjustable hinges 70 kgr black
390-50-240-00
""
Additional locking point with "MUSHROOM" thumb turn
380-50-114-09
380-50-901-02
5b* 380-50-902-03
6*
7*
|Drawing
8a*
8b*
9*
10* 390-51-102-00
V4/2011
*|Optional
127
7*
6*
5*
4
2*
9
9a*
3*
128
2*
9a*
*|Optional
V4/2011
|Mechanisms
A/A
|Code
|Description
|Quantity
390-17-680-00
2
Pair of bolts for second sash with thumb turns
2*
390-50-243-00
2
Bolt for second sash with thumb turns
3*
390-17-670-03
2
Pair of bolts for second sash
485-50-304-00
,
Adjustable spacer for bolts, zamak
5*
390-51-020-00
,
Spacer for bolts, zamak
6*
485-50-305-00
,
Spacer for bolts, plastic
7*
390-50-330-00
,
Spacer for bolts, zamak
390-50-101-00
Adjustable locking bolt for hinge side
350-50-601-02
70 kgr
Pair of hinges for second sash 70 kgr white
350-50-602-03
70 kgr
Pair of hinges for second sash 70 kgr black
350-50-601-09
350-50-601-11
70 kgr
Pair of hinges for second sash 70 kgr anodized EV1
350-50-610-02
70 kgr
Pair of adjustable hinges for second sash 70 kgr white
|Drawing
9a*
350-50-610-03
V4/2011
70 kgr
Pair of adjustable hinges for second sash 70 kgr black
*|Optional
129
130
V4/2011
16mm
Steel Mechanism 16mm
1:1|Profiles 1:1
V4/2011
131
71,5
38,5
M11877
180-25-150-00
113-11-154-00
85,5
72,5
290-11-501-00
113-11-283-00
180-20-025-00
16mm
Flat sash for steel mechanism 16mm
442 mm
External perimeter
105 mm
Primary perimeter
x-x
53,22 cm4
Moment of inertia x-x
y-y
11,07 cm4
Moment of inertia y-y
1663 gr/m
Weight
290-11-501-00
Setting block
113-11-154-00 |outer
|Crimp nail cleat 113-11-283-00 |inner
180-25-150-00 |outer
Alignment corner
180-20-025-00 |inner
49,5
71,5
38,5
M11873
113-11-154-00
180-25-017-00
72,5
85,4
290-11-502-00
180-20-025-00
113-11-283-00
16mm
Round sash for steel mechanism 16mm
455 mm
External perimeter
100 mm
Primary perimeter
x-x
54,16 cm4
Moment of inertia x-x
y-y
12,70 cm4
Moment of inertia y-y
1703 gr/m
Weight
290-11-502-00
Setting block
113-11-154-00 |outer
|Crimp nail cleat 113-11-283-00 |inner
180-25-017-00 |outer
Alignment corner
180-20-025-00 |inner
49,5
132
: European Groove
Note: European Groove frames and transoms are usable
V4/2011
1:1|Profiles1:1
71,5
38,5
M11878
113-11-154-00
180-19-000-00
72,5
85,4
290-11-502-00
180-20-025-00
113-11-283-00
16mm
Chamfered sash for steel mechanism 16mm
472 mm
External perimeter
103 mm
Primary perimeter
x-x
55,39 cm4
Moment of inertia x-x
y-y
13,48 cm4
Moment of inertia y-y
1723 gr/m
Weight
290-11-502-00
Setting block
113-11-154-00 |outer
|Crimp nail cleat 113-11-283-00 |inner
180-19-000-00 |outer
Alignment corner
180-20-025-00 |inner
49,5
71,5
38,5
M11876
180-25-150-00
113-11-154-00
85,5
81,5
290-11-501-00
180-20-025-00
113-11-283-00
16mm
Flat sash for steel mechanism 16mm
440 mm
External perimeter
96 mm
Primary perimeter
x-x
53,22 cm4
Moment of inertia x-x
y-y
11,09 cm4
Moment of inertia y-y
1659 gr/m
Weight
290-11-501-00
Setting block
113-11-154-00 |outer
|Crimp nail cleat 113-11-283-00 |inner
180-25-150-00 |outer
Alignment corner
180-20-025-00 |inner
49,5
V4/2011
: European Groove
Note: European Groove frames and transoms are usable
133
77,2
44,2
M11976
180-25-150-00
113-15-156-00
81,5
85,5
290-11-501-00
180-20-025-00
113-15-283-00
16mm
Flat sash for steel mechanism 16mm
449 mm
External perimeter
108 mm
Primary perimeter
x-x
58,78 cm4
Moment of inertia x-x
y-y
16,19 cm4
Moment of inertia y-y
1809 gr/m
Weight
290-11-501-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-15-283-00 |inner
180-25-150-00 |outer
Alignment corner
180-20-025-00 |inner
55,2
94,8
61,8
113-33-156-00
M11972
180-25-150-00
81,5
85,5
290-11-501-00
113-33-282-00
180-20-025-00
16mm|Flat sash for opening
inward entrance door for steel mechanism 16mm
484 mm
External perimeter
143 mm
Primary perimeter
x-x
70,97 cm4
Moment of inertia x-x
y-y
39,51 cm4
Moment of inertia y-y
2131 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-33-282-00 |inner
180-25-150-00 |outer
Alignment corner
180-20-025-00 |inner
72,8
134
: European Groove
Note: European Groove frames and transoms are usable
V4/2011
1:1|Profiles1:1
65,4
88,9
300-11-875-00
M11875
16mm
Round sash invertion profile for steel mechanism 16mm
454 mm
External perimeter
68 mm
Primary perimeter
x-x
50,06 cm4
Moment of inertia x-x
y-y
11,81 cm4
Moment of inertia y-y
1723 gr/m
Weight
300-11-875-00
End cap
28,8
65,4
300-11-879-03
M11879
81,6
16mm
Flat sash invertion profile for steel mechanism 16mm
438 mm
External perimeter
65 mm
Primary perimeter
x-x
43,32 cm4
Moment of inertia x-x
y-y
10,75 cm4
Moment of inertia y-y
1655 gr/m
Weight
300-11-879-03
End cap
28,8
V4/2011
: European Groove
Note: European Groove frames and transoms are usable
135
136
V4/2011
16mm
Steel Mechanism 16mm
|Basic Typologies
V4/2011
137
-
One sash tilt &
casement window
with fixed
Two sash
casement
window
138
V4/2011
16mm
Steel Mechanism 16mm
1:2|Sections 1:2
V4/2011
139
210-11-500-01
GBHop
Sh
Fh
202-11-151-01
290-00-005-00
M11116
220-11-001-01
220-15-001-01
140
310-11-116-XX
Wd
GBWop
Sw
Fw
V4/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Fw
2.|pieces
Code Nr
|Accessory cuttings
Description
Accessory
According to the frame
Frame height
Fh
Sash width
Sash height
Sw=Fw-2X+12mm
Sh=Fh-2X+12mm
M11116|M11116
waterproofing profile
Wd=Fw-2X-59mm
Width opening for
glazing bead
GBWop=Sw-2Y
Height opening for
glazing bead
GBHop=Sh-2Y
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
4.|pieces
2.|pieces
According to the frame
4.|pieces
Frame alignment
corners
According to the sash
4.|pieces
Sash crimp nail cleats
According to the sash
4.|pieces
Sash alignment
corners
2.|pieces
2.|pieces
1.|piece
202-11-151-01
For frame
Sash width
Sash height
Waterproofing
profile M11116
M11508
M11526
Sw=Fw-40mm
Sh=Fh-40mm
Wd=Fw-111mm
M11510
M11516
M11520
M11649
M11705
Sw=Fw-60mm
Sh=Fh-60mm
Wd=Fw-131mm
M11514
M11518
M11528
M11668
Sw=Fw-80mm
Sh=Fh-80mm
Wd=Fw-151mm
M11814
M11818
Sw=Fw-101mm
Sh=Fh-101mm
Wd=Fw-172mm
: . 290
Note: Details about the glazing bead cutting in page 290
V4/2011
Quantity
2Sw+2Sh
Outer glazing gasket |Meters
According to the glazing width
Inner glazing
gasket
2Sw+2Sh
|Meters
220-15-001-01
Seal gasket
2Sw+2Sh
|Meters
220-11-001-01
Seal gasket
2Fw+2Fh
|Meters
210-11-500-01
Central seal gasket
2Fw+2Fh
|Meters
255-11-500-01
4.|pieces
Vulcanized corner for
central seal gasket
310-11-116-XX
End cap for
waterproofing profile
2.|pieces
4 (1 2)
2 (3 4)
.|pieces
Setting block
4 (1 2)
2 (3 4)
.|pieces
According to the sash
290-00-005-00
141
End cap for sash invertion profile
ISO 7049 st 4,2x13
B
5
A
35
210-11-500-01
Gh1
GBHop
Sh
Fh
Ap
202-11-151-01
290-00-005-00
M11116
220-11-001-01
220-15-001-01
310-11-116-XX
End cap for sash invertion profile
M11879
OR M11875
Wd
Wd
Wd1
Gw
X
GBWop
Sw
Gw
Y
GBWop
Sw
W
142
V4/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
Code Nr
Fw
2.|pieces
Fh
2.|pieces
Sw=Fw/2-X+3,5mm
4.|pieces
Sh=Fh-2X+12mm
|Accessory cuttings
Description
Accessory
4.|pieces
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
According to the glazing width Inner glazing gasket
4Sw+4Sh
|Meters
202-11-151-01
M11116|M11116
waterproofing profile
Ap=Sh-70mm
Wd=Fw/2-X-67,5mm
M11116|M11116
waterproofing profile
Wd1=Fw/2-X-1,5mm
Width opening for
glazing bead
GBWop=Sw-2Y
Height opening for
glazing bead
Glazing width
Glazing height
1.|piece
1.|piece
(M11879)
2.|pieces
(M11875)
1.|piece
(M11879)
0.|piece
(M11875)
220-15-001-01
Seal gasket
4Sw+4Sh
|Meters
220-11-001-01
Seal gasket
2Fw+3Fh
|Meters
210-11-500-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
End cap for sash
invertion profile
1 |pair
End cap for
waterproofing profile
4.|pieces
8.|pieces
Setting block
8.|pieces
GBHop=Sh-2Y
According to the sash
invertion profile
Gw=GBWop-14mm
310-11-116-XX
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
V4/2011
Quantity
According to the sash
290-00-005-00
143
-
One sash tilt & casement window
with fixed
C
6
B
210-11-500-01
Gh1
GBHop
Sh
Fh
Gh2
GBHFop
Fh
202-11-151-01
290-00-005-00
M11116
220-11-001-01
290-11-503-00
X
220-15-001-01
310-11-116-XX
Wd
Gw1
X
144
GBWop
Sw
Gw2
Y
Fw
Xt
GBWFop
Tw
V4/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
M11116|M11116
waterproofing profile
Fw
Fh
Sw=Fw-Tw-X-Xt/2+12mm
Sh=Fh-2X+12mm
Wd=Fw-Tw-X-Xt/2-59mm
2.|pieces
Code Nr
|Accessory cuttings
Description
Accessory
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
4.|pieces
According to the sash
Sash alignment
corners
4.|pieces
2.|pieces
2.|pieces
2.|pieces
1.|piece
202-11-151-01
Transom-mullion
cutting
T=Fh-2X+9mm
()
Width opening for
glazing bead (sash)
GBWop=Sw-2Y
()
Height opening for
glazing bead (sash)
GBHop=Sh-2Y
()
Width opening for
glazing bead (frame)
GBWFop=Tw-X-Xt/2
()
Height opening for
glazing bead (frame)
Glazing width
Glazing height
1.|piece
GBHFop=Fh-2X
Gw1=GBWop-14mm
Gh1=GBHop-14mm
Inner glazing
gasket
2Sw+2Sh+2Tw+2Fh
|Meters
220-15-001-01
Seal gasket
2Sw+2Sh
|Meters
220-11-001-01
Seal gasket
2(Fw-Tw)+2Fh
|Meters
210-11-500-01
Central seal gasket
2(Fw-Tw)+2Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
310-11-116-XX
End cap for
waterproofing profile
2.|pieces
Transom-mullion
cleat
2.|pieces
2.|pieces
4.|pieces
Setting block
6.|pieces
According to the
transom-mullion
Gw2=GBWFop-14mm
According to the sash
Glazing height
Gh2=GBHFop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
V4/2011
2Sw+2Sh+2Tw+2Fh
Outer glazing gasket
|Meters
According to the glazing width
290-11-503-00
Glazing width
Quantity
290-00-005-00
145
End cap for sash invertion profile
ISO 7049 st 4,2x13
B
7
A
35
210-11-500-01
Gh1
GBHop
Sh
Fh
Ap
202-11-151-01
290-00-005-00
M11116
220-11-001-01
220-15-001-01
310-11-116-XX
End cap for sash invertion profile
M11879
OR M11875
Wd
Wd
Wd1
Gw
X
GBWop
Sw
Gw
Y
GBWop
Sw
W
146
V4/2011
1:2|Sections 1:2
|Profile cuttings
Frame width
Frame height
Sash width
Sash height
Code Nr
Fw
2.|pieces
Fh
2.|pieces
Sw=Fw/2-X+3,5mm
4.|pieces
Sh=Fh-2X+12mm
|Accessory cuttings
Description
Accessory
4.|pieces
According to the frame
4.|pieces
According to the frame
Frame alignment
corners
4.|pieces
According to the sash
Sash crimp
nail cleats
8.|pieces
According to the sash
Sash alignment
corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
According to the glazing width Inner glazing gasket
4Sw+4Sh
|Meters
202-11-151-01
M11116|M11116
waterproofing profile
Ap=Sh-70mm
Wd=Fw/2-X-67,5mm
M11116|M11116
waterproofing profile
Wd1=Fw/2-X-1,5mm
Width opening for
glazing bead
GBWop=Sw-2Y
Height opening for
glazing bead
Glazing width
Glazing height
1.|piece
1.|piece
(M11879)
2.|pieces
(M11875)
1.|piece
(M11879)
0.|piece
(M11875)
220-15-001-01
Seal gasket
4Sw+4Sh
|Meters
220-11-001-01
Seal gasket
2Fw+3Fh
|Meters
210-11-500-01
Central seal gasket
2Fw+3Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
4.|pieces
End cap for sash
invertion profile
1 |pair
End cap for
waterproofing profile
4.|pieces
8.|pieces
Setting block
8.|pieces
GBHop=Sh-2Y
According to the sash
invertion profile
Gw=GBWop-14mm
310-11-116-XX
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
V4/2011
Quantity
According to the sash
290-00-005-00
147
148
V4/2011
16mm
Steel Mechanism 16mm
|Milling-Tooling Operations
V4/2011
149
12
0
1
64
43
10
G
26,2
25,5
18
25,5
|Handle height
For sash groove height
(G)
Sash handle height (G)
150
350-550mm
551-720mm
721-850mm
155mm
200mm
250mm
500mm
600mm
980mm
V4/2011
16mm
Steel mechanism 16mm
|Mechanisms
V4/2011
151
-
One sash tilt & casement window
10
9
11
19
8
12
17
1
19
|Table
19
7,5
SRW
751-1200mm 1201-1450mm 1451-1600mm
4
5
3
5
6
7
8
9
7
8
9
10
10
11
12
19
15
6
19
SRH
280-750mm
1
3
5
6
8
SRH
350-720mm
721-1350mm
1351-1600mm
1601-2100mm
2101-2350mm
SRW
13
16
15
19
14
18
152
V4/2011
|Mechanisms
A/A
1
2
5
6
7
8
10
11
12
13
14
15
16
17
18
19
1 "|Corner transmission
7,5mm Constand|Gear 7,5mm Constand 15mm Constand|Gear 15mm Constand
416-12-100-00*
SRH 350-450mm*
G=155
416-22-141-00
416-12-100-00
SRH 451-550mm
G=155
416-22-142-00
416-12-200-00
SRH 551-720mm
G=200
416-22-143-00
416-12-300-00
SRH 721-850mm
G=250
416-22-144-00
416-12-400-00
SRH 851-1100mm
G=400
416-22-145-00
416-12-500-00
SRH 1101-1350mm
G=500
416-22-147-00
416-12-700-00
SRH 1351-1600mm
G=600
416-22-148-00
416-12-800-00
SRH 1601-1850mm
G=600
416-13-300-00
416-22-153-00
SRH 1851-2100mm
G=980
416-13-400-00
416-22-154-00
SRH 2101-2350mm
G=980
|Middle lock bottom
416-01-200-00
SRW 280-750mm
416-07-605-00
SRW 751-950mm
416-07-607-00
SRW 951-1200mm
416-07-610-00
SRW 1201-1600mm
DIRIGENT-F 25mm|Handle DIRIGENT-F with spindle 25mm
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
5x30|Countersunk screw M5x30
419-25-530-00
|Wrong operation safety device
416-98-700-00
|Wedge plate for WOSD into frame
416-77-600-00
|Stay arm connection plate
416-51-203-00*
SRW 280-400mm*
416-51-203-00
SRW 401-500mm
416-51-206-00
SRW 501-750mm
416-51-208-00
SRW 751-950mm
416-51-210-00
SRW 951-1200mm
416-51-212-00
SRW 1201-1450mm
416-51-212-00
SRW 1451-1600mm
416-14-200-00
|Stay arm
|Right
|Left
416-72-181-00
416-72-180-00
SRW 280-500mm
416-73-181-00
416-73-180-00
SRW 501-750mm
416-74-181-00
416-74-180-00
SRW 751-1200mm
416-75-181-00
416-75-180-00
SRW 1201-1450mm
|Stay arm cover
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
|Stay arm bearing
416-63-606-00
|Stay arm bearing cover
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
|Rebate corner hinge
|Right
|Left
416-21-180-11
416-21-181-11
|Rebate corner hinge cover
|Right
|Left
|White
416-87-001-02
416-87-000-02
|Brown
416-87-001-06
416-87-000-06
|Silver
416-87-001-09
416-87-000-09
|Corner bearing cover
|White
416-46-100-02
|Brown
416-61-000-06
|Silver
416-46-100-09
|Corner bearing
|White
416-74-222-02
|Brown
416-74-222-06
|Silver
416-74-222-11
|Middle lock hinge side
416-07-505-00
SRH 721-1100mm
416-07-507-00
SRH 1101-1350mm
416-07-512-00
SRH 1351-1850mm
416-07-515-00
SRH 1851-2100mm
416-07-519-00
SRH 2101-2350mm
""|Mushroom locking plate SE
416-67-448-00
|Standard locking plate
416-73-415-01
* SRW 280-400, SRH 350-450 |* SRW 280-400, SRH 350-450 only with corner transmission 416-23-800-00
V4/2011
416-02-100-00
Quantity
1
1
2
1
1
1
1
1
Table
153
22
21
Rebate shoot bolt
9
23
10
11
23
Left
Side hung sash hinge rotation
24
Right
11
9
10
SRH
20
SRW
12
15
14
22
13
18
19
154
V4/2011
|Mechanisms
Rebate shoot bolt
-
( )
Two sash tilt & casement window
(First sash)
10
9
11
19
8
12
19
17
1
|Table
280-750mm
2
3
4
5
SRH
350-720mm
721-1350mm
1351-2100mm
2101-2350mm
7,5
19
15
6
19
SRH
SRW
751-1200mm 1201-1450mm 1451-1600mm
9
10
6
7
10
11
11
12
8
9
12
13
SRW
13
16
15
19
14
18
V4/2011
155
Quantity
A/A
1
1 "|Corner transmission
416-02-100-00
2
SRH 451-550mm
G=155
416-22-141-00
416-12-100-00
SRH 551-720mm
G=200
416-22-142-00
416-12-200-00
SRH 721-850mm
G=250
416-22-143-00
416-12-300-00
SRH 851-1100mm
G=400
416-22-144-00
416-12-400-00
SRH 1101-1350mm
G=500
416-22-145-00
416-12-500-00
SRH 1351-1600mm
G=600
416-22-147-00
416-12-700-00
SRH 1601-1850mm
G=600
416-22-148-00
416-12-800-00
SRH 1851-2100mm
G=980
416-22-153-00
416-13-300-00
SRH 2101-2350mm
G=980
416-22-154-00
416-13-400-00
3
SRW 401-750mm
416-01-200-00
SRW 751-950mm
416-07-605-00
SRW 951-1200mm
416-07-607-00
SRW 1201-1600mm
416-07-610-00
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-98-700-00
416-14-900-00
Wedge plate for WOSD into rebate shoot bolt
8
SRW 401-500mm
416-51-203-00
SRW 501-750mm
416-51-206-00
SRW 751-950mm
416-51-208-00
SRW 951-1200mm
416-51-210-00
SRW 1201-1450mm
416-51-212-00
416-51-212-00
SRW 1451-1600mm
416-14-200-00
|Stay arm
156
|Right
|Left
SRW 280-500mm
416-72-181-00
416-72-180-00
SRW 501-750mm
416-73-181-00
416-73-180-00
SRW 751-1200mm
416-74-181-00
416-74-180-00
SRW 1201-1450mm
416-75-181-00
416-75-180-00
V4/2011
|Mechanisms
Quantity
A/A
|Stay arm cover
10
11
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
416-63-606-00
2 SRH
451-1100mm
3 SRH
1101-2350mm
2
12
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
2 SRH
451-1100mm
3 SRH
1101-2350mm
13
|Right
|Left
416-21-181-11
416-21-180-11
1+1
14
|Right
|Left
|White
416-87-001-02
416-87-000-02
|Brown
416-87-001-06
416-87-000-06
416-87-001-09
416-87-000-09
|Silver
1+1
15
|White
416-46-100-02
|Brown
416-61-000-06
|Silver
416-46-100-09
|Corner bearing
16
|White
416-74-222-02
|Brown
416-74-222-06
|Silver
416-74-222-11
17
SRH 721-1100mm
416-07-505-00
SRH 1101-1350mm
416-07-507-00
SRH 1351-1850mm
416-07-512-00
SRH 1851-2100mm
416-07-515-00
SRH 2101-2350mm
416-07-519-00
18
416-67-448-00
19
416-73-415-01
Table
20
21
SRH 451-720mm
416-18-000-00
SRH 721-850mm
416-18-100-00
SRH 851-1100mm
416-18-200-00
SRH 1101-1350mm
416-18-300-00
SRH 1351-1600mm
416-18-400-00
SRH 1601-1850mm
416-18-500-00
SRH 1851-2100mm
416-18-600-00
SRH 2101-2350mm
416-18-700-00
416-32-303-00
SRW 280-750mm
SRW 751-950mm
SRW 951-1200mm
SRW 1201-1600mm
416-85-218-00
416-32-010-00
416-32-805-00
416-32-807-00
416-32-810-00
|Side hung sash hinge
24
SRH 1101-2350mm
V4/2011
22
23
416-85-418-00
157
18
18
10
11
8
Left
Side hung sash hinge rotation
Right
|Table
18
7,5
280-750mm
1
2
3
4
5
SRW
751-1200mm 1201-1600mm
5
3
4
6
7
5
6
8
7
9
16
11
9
10
15
SRH
SRH
451-720mm
721-1350mm
1351-1600mm
1601-2100mm
2101-2350mm
SRW
12
15
14
3
17
158
18
13
V4/2011
|Mechanisms
A/A
416-32-624-00
1
2
SRH 451-500mm
SRH 551-720mm
SRH 721-850mm
SRH 851-1100mm
SRH 1101-1350mm
SRH 1351-1600mm
SRH 1601-1850mm
SRH 1851-2100mm
SRH 2101-2350mm
G=155
G=200
G=250
G=400
G=500
G=600
G=600
G=980
G=980
SRW 280-750mm
416-32-010-00
SRW 751-950mm
416-32-805-00
SRW 951-1200mm
416-32-807-00
Quantity
1
416-32-810-00
SRW 1201-1600mm
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-98-700-00
416-77-600-00
416-85-218-00
10
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
416-63-606-00
1 SRH
451-1100mm
2 SRH
1101-2350mm
1 SRH
451-1100mm
11
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
|Right
13
|White
|Brown
|Silver
14
|White
|Brown
|Silver
15
|White
|Brown
|Silver
16
V4/2011
2 SRH
1101-2350mm
12
17
18
1 SRH
451-1100mm
SRH 1101-2350mm
416-67-448-00
416-73-415-01
416-21-181-11
|Rebate corner hinge cover
|Right
416-87-001-02
416-87-001-06
416-87-001-09
|Corner bearing cover
416-46-100-02
416-61-000-06
416-46-100-09
|Corner bearing
416-74-222-02
416-74-222-06
416-74-222-11
|Sash middle hinge
|Left
416-21-180-11
|Left
416-87-000-02
416-87-000-06
416-87-000-09
416-85-418-00
""|Mushroom locking plate SE
|Standard locking plate
1
1
Table
159
18
18
3
20
Rebate shoot bolt
9
10
11
Left
Side hung sash hinge rotation
16
Right
11
9
10
SRH
19
SRW
12
15
14
3
13
17
18
160
V4/2011
|Mechanisms
Rebate shoot bolt
( )
Two sash casement window (First sash)
18
18
10
11
8
Left
Side hung sash hinge rotation
Right
|Table
SRW
751-1200mm 1201-1600mm
10
6
280-750mm
2
SRH
451-2350mm
16
11
9
2
7,5
10
15
SRH
SRW
12
15
14
3
V4/2011
17
18
13
161
Quantity
A/A
1
416-32-624-00
2
SRH 451-500mm
G=155
416-22-141-00
416-12-100-00
SRH 551-720mm
G=200
416-22-142-00
416-12-200-00
SRH 721-850mm
G=250
416-22-143-00
416-12-300-00
SRH 851-1100mm
G=400
416-22-144-00
416-12-400-00
SRH 1101-1350mm
G=500
416-22-145-00
416-12-500-00
SRH 1351-1600mm
G=600
416-22-147-00
416-12-700-00
SRH 1601-1850mm
G=600
416-22-148-00
416-12-800-00
SRH 1851-2100mm
G=980
416-22-153-00
416-13-300-00
SRH 2101-2350mm
G=980
416-22-154-00
416-13-400-00
3
SRW 280-750mm
416-32-010-00
SRW 751-950mm
416-32-805-00
SRW 951-1200mm
416-32-807-00
SRW 1201-1600mm
416-32-810-00
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-98-700-00
416-14-900-00
Wedge plate for WOSD into rebate shoot bolt
416-85-218-00
9
|White
416-69-500-02
2 SRH
451-1100mm
|Brown
|Silver
416-69-500-06
4 SRH
1101-2350mm
416-69-500-09
2 SRH
451-1100mm
10
416-63-606-00
162
V4/2011
|Mechanisms
Quantity
A/A
|Stay arm bearing cover
11
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
2 SRH
451-1100mm
4 SRH
1101-2350mm
416-65-300-09
|Rebate corner hinge
12
|Right
|Left
416-21-181-11
416-21-180-11
1+1
13
|Right
|Left
|White
416-87-001-02
416-87-000-02
|Brown
416-87-001-06
416-87-000-06
|Silver
416-87-001-09
416-87-000-09
1+1
14
|White
416-46-100-02
|Brown
416-61-000-06
|Silver
416-46-100-09
|Corner bearing
15
|White
416-74-222-02
|Brown
416-74-222-06
|Silver
416-74-222-11
16
SRH 1101-2350mm
416-85-418-00
17
416-67-448-00
18
416-73-415-01
Table
19
SRH 451-720mm
416-18-000-00
SRH 721-850mm
416-18-100-00
SRH 851-1100mm
416-18-200-00
SRH 1101-1350mm
416-18-300-00
SRH 1351-1600mm
416-18-400-00
SRH 1601-1850mm
416-18-500-00
SRH 1851-2100mm
416-18-600-00
SRH 2101-2350mm
416-18-700-00
416-32-303-00
20
V4/2011
163
-
One sash tilt & casement window
10
9
11
18
8
12
17
1
18
18
|Table
18
7,5
280-750mm
3
5
7
8
10
SRH
350-720mm
721-1350mm
1351-1600mm
1601-2100mm
2101-2350mm
SRW
751-1200mm 1201-1450mm 1451-1600mm
6
7
5
7
8
9
10
11
9
10
11
12
12
13
14
18
15
SRH
18
SRW
13
16
15
18
14
18
164
V4/2011
|Mechanisms
A/A
416-02-100-00
1
2
SRH 451-550mm
SRH 551-720mm
SRH 721-850mm
SRH 851-1100mm
SRH 1101-1350mm
SRH 1351-1600mm
SRH 1601-1850mm
SRH 1851-2100mm
SRH 2101-2350mm
G=155
G=200
G=250
G=400
G=500
G=600
G=600
G=980
G=980
3
SRW 401-750mm
SRW 751-950mm
SRW 951-1200mm
SRW 1201-1600mm
5
6
7
8
RAL9016|White RAL9016
RAL8022|Brown RAL8022
F1/EV1|Silver F1/EV1
419-25-530-00
416-98-700-00
416-77-600-00
SRW 401-500mm
SRW 501-750mm
SRW 751-950mm
SRW 951-1200mm
SRW 1201-1450mm
SRW 1451-1600mm
9
SRW 280-500mm
SRW 501-750mm
SRW 751-1200mm
SRW 1201-1450mm
10
11
12
|White
|Brown
|Silver
416-63-606-00
|White
|Brown
|Silver
13
14
|White
|Brown
|Silver
15
|White
|Brown
|Silver
16
|White
|Brown
|Silver
17
18
V4/2011
SRH 451-720mm
SRH 721-1100mm
SRH 1101-1350mm
SRH 1351-1850mm
SRH 1851-2100mm
SRH 2101-2350mm
416-67-448-00
1 "|Corner transmission
7,5mm Constand|Gear 7,5mm Constand 15mm Constand|Gear 15mm Constand
416-22-141-00
416-12-100-00
416-22-142-00
416-12-200-00
416-22-143-00
416-12-300-00
416-22-144-00
416-12-400-00
416-22-145-00
416-12-500-00
416-22-147-00
416-12-700-00
416-22-148-00
416-12-800-00
416-13-300-00
416-22-153-00
416-13-400-00
416-22-154-00
|Middle lock bottom
416-01-200-00
416-07-605-00
416-07-607-00
416-07-610-00
DIRIGENT-F 25mm|Handle DIRIGENT-F with spindle 25mm
416-72-250-02
416-72-250-06
416-72-250-11
5x30|Countersunk screw M5x30
|Wrong operation safety device
|Wedge plate for WOSD into frame
|Stay arm connection plate
416-51-203-00
416-51-206-00
416-51-208-00
416-51-210-00
416-51-212-00
416-51-212-00
416-14-200-00
|Stay arm
|Right
|Left
416-72-181-00
416-72-180-00
416-73-181-00
416-73-180-00
416-74-181-00
416-74-180-00
416-75-181-00
416-75-180-00
|Stay arm cover
416-69-500-02
416-69-500-06
416-69-500-09
|Stay arm bearing
|Stay arm bearing cover
416-65-300-02
416-65-300-06
416-65-300-09
|Rebate corner hinge
|Right
|Left
416-21-180-11
416-21-181-11
|Rebate corner hinge cover
|Right
|Left
416-87-001-02
416-87-000-02
416-87-001-06
416-87-000-06
416-87-001-09
416-87-000-09
|Corner bearing cover
416-46-100-02
416-61-000-06
416-46-100-09
|Corner bearing
416-74-222-02
416-74-222-06
416-74-222-11
|Middle lock SE hinge side
416-32-010-00
416-32-805-00
416-32-807-00
416-32-812-00
416-32-815-00
416-32-819-00
""|Mushroom locking plate SE
Quantity
1
1
2
1
1
1
1
Table
165
10
9
11
18
8
12
18
17
1
18
18
-
( )
Two sash tilt & casement window
(Second sash)
Rebate shoot bolt
SRH
19
SRW
18
13
16
15
14
18
3
18
166
V4/2011
|Mechanisms
Rebate shoot bolt
-
( )
Two sash tilt & casement window
(First sash)
10
9
11
18
8
12
18
17
1
18
|Table
280-750mm
3
5
7
8
10
SRH
350-720mm
721-1350mm
1351-1600mm
1601-2100mm
2101-2350mm
7,5
18
15
6
18
SRH
SRW
751-1200mm 1201-1450mm 1451-1600mm
6
7
5
7
8
9
10
11
9
10
11
12
12
13
14
SRW
13
16
15
18
14
18
V4/2011
167
Quantity
A/A
1
1 "|Corner transmission
416-02-100-00
2
SRH 451-550mm
G=155
416-22-141-00
416-12-100-00
SRH 551-720mm
G=200
416-22-142-00
416-12-200-00
SRH 721-850mm
G=250
416-22-143-00
416-12-300-00
SRH 851-1100mm
G=400
416-22-144-00
416-12-400-00
SRH 1101-1350mm
G=500
416-22-145-00
416-12-500-00
SRH 1351-1600mm
G=600
416-22-147-00
416-12-700-00
SRH 1601-1850mm
G=600
416-22-148-00
416-12-800-00
SRH 1851-2100mm
G=980
416-22-153-00
416-13-300-00
SRH 2101-2350mm
G=980
416-22-154-00
416-13-400-00
3
SRW 401-750mm
416-01-200-00
SRW 751-950mm
416-07-605-00
SRW 951-1200mm
416-07-607-00
SRW 1201-1600mm
416-07-610-00
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-98-700-00
416-14-900-00
Wedge plate for WOSD into rebate shoot bolt
8
SRW 401-500mm
416-51-203-00
SRW 501-750mm
416-51-206-00
SRW 751-950mm
416-51-208-00
SRW 951-1200mm
416-51-210-00
SRW 1201-1450mm
416-51-212-00
416-51-212-00
SRW 1451-1600mm
416-14-200-00
|Stay arm
168
|Right
|Left
SRW 280-500mm
416-72-181-00
416-72-180-00
SRW 501-750mm
416-73-181-00
416-73-180-00
SRW 751-1200mm
416-74-181-00
416-74-180-00
SRW 1201-1450mm
416-75-181-00
416-75-180-00
1+1
V4/2011
|Mechanisms
Quantity
A/A
|Stay arm cover
10
11
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
416-63-606-00
12
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
13
|Right
|Left
416-21-181-11
416-21-180-11
1+1
|Rebate corner hinge cover
14
|Right
|Left
|White
416-87-001-02
416-87-000-02
|Brown
416-87-001-06
416-87-000-06
|Silver
416-87-001-09
416-87-000-09
1+1
15
|White
416-46-100-02
|Brown
416-61-000-06
|Silver
416-46-100-09
|Corner bearing
16
|White
416-74-222-02
|Brown
416-74-222-06
|Silver
416-74-222-11
17
SRH 451-720mm
416-32-010-00
SRH 721-1100mm
416-32-805-00
SRH 1101-1350mm
416-32-807-00
SRH 1351-1850mm
416-32-812-00
SRH 1851-2100mm
416-32-815-00
SRH 2101-2350mm
416-32-819-00
416-67-448-00
18
Table
19
SRH 451-720mm
416-18-000-00
SRH 721-850mm
416-18-100-00
SRH 851-1100mm
416-18-200-00
SRH 1101-1350mm
416-18-300-00
SRH 1351-1600mm
416-18-400-00
SRH 1601-1850mm
416-18-500-00
SRH 1851-2100mm
416-18-600-00
SRH 2101-2350mm
416-18-700-00
V4/2011
169
10
9
11
18
8
12
17
1
18
18
|Table
18
7,5
SRW
751-1200mm 1201-1450mm 1451-1600mm
6
7
5
7
8
9
10
11
9
10
11
12
12
13
14
18
15
6
18
SRH
280-750mm
3
5
7
8
10
SRH
451-720mm
721-1350mm
1351-1600mm
1601-2100mm
2101-2350mm
SRW
13
16
15
3
19
170
18
14
18
V4/2011
|Mechanisms
A/A
416-02-100-00
1
2
SRH 451-500mm
SRH 551-720mm
SRH 721-850mm
SRH 851-1100mm
SRH 1101-1350mm
SRH 1351-1600mm
SRH 1601-1850mm
SRH 1851-2100mm
SRH 2101-2350mm
G=155
G=200
G=250
G=400
G=500
G=600
G=600
G=980
G=980
3
SRW 401-750mm
SRW 751-950mm
SRW 951-1200mm
SRW 1201-1600mm
5
6
7
8
RAL9016|White RAL9016
RAL8022|Brown RAL8022
F1/EV1|Silver F1/EV1
419-25-530-00
416-98-700-00
416-77-600-00
SRW 401-500mm
SRW 501-750mm
SRW 751-950mm
SRW 951-1200mm
SRW 1201-1450mm
SRW 1451-1600mm
9
SRW 280-500mm
SRW 501-750mm
SRW 751-1200mm
SRW 1201-1450mm
10
11
12
|White
|Brown
|Silver
416-63-606-00
|White
|Brown
|Silver
13
14
|White
|Brown
|Silver
15
|White
|Brown
|Silver
16
|White
|Brown
|Silver
17
18
19
V4/2011
SRH 451-720mm
SRH 721-1100mm
SRH 1101-1350mm
SRH 1351-1850mm
SRH 1851-2100mm
SRH 2101-2350mm
416-67-448-00
416-43-200-00
1 "|Corner transmission
7,5mm Constand|Gear 7,5mm Constand 15mm Constand|Gear 15mm Constand
416-22-141-00
416-12-100-00
416-22-142-00
416-12-200-00
416-22-143-00
416-12-300-00
416-22-144-00
416-12-400-00
416-22-145-00
416-12-500-00
416-22-147-00
416-12-700-00
416-22-148-00
416-12-800-00
416-13-300-00
416-22-153-00
416-13-400-00
416-22-154-00
|Middle lock bottom
416-01-200-00
416-07-605-00
416-07-607-00
416-07-610-00
DIRIGENT-F 25mm|Handle DIRIGENT-F with spindle 25mm
416-72-250-02
416-72-250-06
416-72-250-11
5x30|Countersunk screw M5x30
|Wrong operation safety device
|Wedge plate for WOSD
|Stay arm connection plate
416-51-203-00
416-51-206-00
416-51-208-00
416-51-210-00
416-51-212-00
416-51-212-00
416-14-200-00
|Stay arm
|Right
|Left
416-72-181-00
416-72-180-00
416-73-181-00
416-73-180-00
416-74-181-00
416-74-180-00
416-75-181-00
416-75-180-00
|Stay arm cover
416-69-500-02
416-69-500-06
416-69-500-09
|Stay arm bearing
|Stay arm bearing cover
416-65-300-02
416-65-300-06
416-65-300-09
|Rebate corner hinge
|Right
|Left
416-21-180-11
416-21-181-11
|Rebate corner hinge cover
|Right
|Left
416-87-001-02
416-87-000-02
416-87-001-06
416-87-000-06
416-87-001-09
416-87-000-09
|Corner bearing cover
416-46-100-02
416-61-000-06
416-46-100-09
|Corner bearing
416-74-222-02
416-74-222-06
416-74-222-11
|Middle lock SE hinge side
416-32-010-00
416-32-805-00
416-32-807-00
416-32-812-00
416-32-815-00
416-32-819-00
""|Mushroom locking plate SE
|Lifting stop 90O
Quantity
1
1
2
1
1
1
1
Table
1
171
10
9
11
18
8
12
18
17
1
18
18
( )
Two sash casement window
(Second sash)
Rebate shoot bolt
SRH
20
SRW
18
13
16
15
14
18
3
18
172
V4/2011
|Mechanisms
Rebate shoot bolt
( )
Two sash casement window (First sash)
10
9
11
18
8
12
18
17
18
|Table
401-750mm
6
8
10
12
SRH
451-720mm
721-1350mm
1351-2100mm
2101-2350mm
7,5
18
15
6
18
SRH
SRW
751-1200mm 1201-1450mm 1451-1600mm
12
14
10
12
14
16
16
18
14
16
18
20
SRW
13
16
15
3
19
V4/2011
18
14
18
173
Quantity
A/A
1
1 "|Corner transmission
416-02-100-00
2
SRH 451-500mm
G=155
416-22-141-00
416-12-100-00
SRH 551-720mm
G=200
416-22-142-00
416-12-200-00
SRH 721-850mm
G=250
416-22-143-00
416-12-300-00
SRH 851-1100mm
G=400
416-22-144-00
416-12-400-00
SRH 1101-1350mm
G=500
416-22-145-00
416-12-500-00
SRH 1351-1600mm
G=600
416-22-147-00
416-12-700-00
SRH 1601-1850mm
G=600
416-22-148-00
416-12-800-00
SRH 1851-2100mm
G=980
416-22-153-00
416-13-300-00
SRH 2101-2350mm
G=980
416-22-154-00
416-13-400-00
3
SRW 401-750mm
416-01-200-00
SRW 751-950mm
416-07-605-00
SRW 951-1200mm
416-07-607-00
SRW 1201-1600mm
416-07-610-00
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-98-700-00
416-14-900-00
Wedge plate for WOSD into rebate shoot bolt
8
SRW 401-500mm
416-51-203-00
SRW 501-750mm
416-51-206-00
SRW 751-950mm
416-51-208-00
SRW 951-1200mm
416-51-210-00
SRW 1201-1450mm
416-51-212-00
416-51-212-00
SRW 1451-1600mm
416-14-200-00
|Stay arm
|Right
|Left
SRW 280-500mm
416-72-181-00
416-72-180-00
SRW 501-750mm
416-73-181-00
416-73-180-00
SRW 751-1200mm
416-74-181-00
416-74-180-00
SRW 1201-1450mm
416-75-181-00
416-75-180-00
10
174
1+1
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
V4/2011
|Mechanisms
Quantity
A/A
11
416-63-606-00
12
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
13
|Right
|Left
416-21-181-11
416-21-180-11
1+1
|Rebate corner hinge cover
14
|Right
|Left
|White
416-87-001-02
416-87-000-02
|Brown
416-87-001-06
416-87-000-06
|Silver
416-87-001-09
416-87-000-09
1+1
15
|White
416-46-100-02
|Brown
416-61-000-06
|Silver
416-46-100-09
|Corner bearing
16
|White
416-74-222-02
|Brown
416-74-222-06
|Silver
416-74-222-11
17
SRH 451-720mm
416-32-010-00
SRH 721-1100mm
416-32-805-00
SRH 1101-1350mm
416-32-807-00
SRH 1351-1850mm
416-32-812-00
SRH 1851-2100mm
416-32-815-00
SRH 2101-2350mm
416-32-819-00
18
416-67-448-00
Table
19
416-43-200-00
20
SRH 451-720mm
416-18-000-00
SRH 721-850mm
416-18-100-00
SRH 851-1100mm
416-18-200-00
SRH 1101-1350mm
416-18-300-00
SRH 1351-1600mm
416-18-400-00
SRH 1601-1850mm
416-18-500-00
SRH 1851-2100mm
416-18-600-00
SRH 2101-2350mm
416-18-700-00
V4/2011
175
Dormer window
12
12
2
6
4
3
SRH
SRW
|Table
SRH
-1100mm
1101-1600mm
12
591-750mm
2
4
SRW
751-1200mm 1201-1450mm
4
3
5
6
12
9
10
10
11
176
11
V4/2011
|Mechanisms
Quantity
A/A
1
416-32-104-00
2
SRW 591-750mm
416-08-100-00
SRW 751-1200mm
416-08-200-00
SRW 1201-1700mm
416-08-400-00
SRW 1700-1950mm
416-08-500-00
|Middle lock
3
SRH 1101-1350mm
416-07-505-00
SRW 1351-1600mm
416-07-507-00
4
RAL9016|White RAL9016
416-72-250-02
RAL8022|Brown RAL8022
416-72-250-06
F1/EV1|Silver F1/EV1
416-72-250-11
419-25-530-00
416-32-105-00
1 SRW
591-1200mm
7
416-76-500-00
416-84-718-00
|White
416-69-500-02
|Brown
416-69-500-06
|Silver
416-69-500-09
416-63-606-00
V4/2011
11
12
10
|White
416-65-300-02
|Brown
416-65-300-06
|Silver
416-65-300-09
416-67-448-00
Table
177
178
V4/2011
|Entrance Doors
1:1|Profiles 1:1
V4/2011
179
|Entrance Doors
180-11-801-00
68
M11586
76,5
72,5
113-43-056-00
113-43-220-00
125-43-220-00
46
9,5
Frame specially for entrance doors
Flat frame for opening inward entrance door
350 mm
External perimeter
118 mm
Primary perimeter
x-x
46,90 cm4
Moment of inertia x-x
y-y
29,22 cm4
Moment of inertia y-y
1764 gr/m
Weight
113-43-056-00 |outer
|Crimp nail cleat 113-43-220-00 |inner
125-43-220-00 |inner
Aluminium spring cleat
180-11-801-00 |outer
Alignment corner
180-11-801-00
68
M11588
113-43-295-00
72,5
76,5
125-43-295-00
113-33-056-00
46
9,5
Frame specially for entrance doors
180
Flat frame for opening outward entrance door
352 mm
External perimeter
118 mm
Primary perimeter
x-x
48,27 cm4
Moment of inertia x-x
y-y
28,83 cm4
Moment of inertia y-y
1738 gr/m
Weight
113-33-056-00 |outer
|Crimp nail cleat 113-43-295-00 |inner
125-43-295-00 |outer
Aluminium spring cleat
180-11-801-00 |outer
Alignment corner
V4/2011
1:1|Profiles1:1
180-19-000-00
68
113-43-171-00
72,5
91,4
M11786
113-43-220-00
125-43-220-00
46
9,5
Frame specially for entrance doors
Round frame for opening inward entrance door
410 mm
External perimeter
125 mm
Primary perimeter
x-x
67,80 cm4
Moment of inertia x-x
y-y
35,12 cm4
Moment of inertia y-y
2007 gr/m
Weight
113-43-171-00 |outer
|Crimp nail cleat 113-43-220-00 |inner
125-43-220-00 |inner
Aluminium spring cleat
180-19-000-00 |outer
Alignment corner
180-19-000-00
68
M11788
113-43-410-00
72,5
91,4
125-43-410-00
113-33-056-00
46
9,5
Frame specially for entrance doors
V4/2011
Round frame for opening outward entrance door
423 mm
External perimeter
125 mm
Primary perimeter
x-x
76,09 cm4
Moment of inertia x-x
y-y
34,79 cm4
Moment of inertia y-y
1972 gr/m
Weight
113-33-056-00 |outer
|Crimp nail cleat 113-43-410-00 |inner
125-43-410-00 |outer
Aluminium spring cleat
180-19-000-00 |outer
Alignment corner
181
|Entrance Doors
M11514
68
113-33-121-00
180-25-010-00
72,5
76,5
290-11-503-00
113-33-196-00
Crimp cleat pre-tapped
112-33-196-00
125-33-196-00
46
European Groove
European Groove frame for entrance doors
78,5
113-43-121-00
A 180-25-010-00
72,5
76,5
Aluminium spring cleat
Alignment corner
112-33-196-00
|inner
125-33-196-00 |inner
180-25-010-00 |outer
M11814
290-11-503-00
113-43-194-00
125-43-194-00
56,5
European Groove
European Groove frame for entrance doors
182
|Flat frame
474 mm
External perimeter
118 mm
Primary perimeter
x-x
46,80 cm4
Moment of inertia x-x
y-y
22,60 cm4
Moment of inertia y-y
1724 gr/m
Weight
290-11-503-00
Setting block
113-33-121-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
|Flat frame
496 mm
External perimeter
139 mm
Primary perimeter
x-x
53,87 cm4
Moment of inertia x-x
y-y
37,89 cm4
Moment of inertia y-y
1950 gr/m
Weight
290-11-503-00
Setting block
113-43-121-00 |outer
|Crimp nail cleat 113-43-196-00 |inner
Aluminium spring cleat
Alignment corner
125-43-194-00 |inner
180-25-010-00 |outer
V4/2011
1:1|Profiles1:1
78,5
M11910
113-61-121-00
180-25-010-00
160-11-861-91
72,5
76,5
290-11-503-00
113-61-196-00
160-11-261-91
74
European Groove
European Groove frame for entrance doors
|Flat frame
531 mm
External perimeter
174 mm
Primary perimeter
x-x
63,43 cm4
Moment of inertia x-x
y-y
72,72 cm4
Moment of inertia y-y
2247 gr/m
Weight
290-11-503-00
Setting block
113-61-121-00 |outer
|Crimp nail cleat 113-43-196-00 |inner
160-11-861-91 |outer
Aluminium
160-11-261-91 |inner
transom-mullion cleat
180-25-010-00 |outer
Alignment corner
180-25-010-00
110
113-75-121-00
M11906
290-11-503-00
72,5
76,5
160-11-875-91
113-75-196-00
160-11-275-91
88
European Groove
European Groove frame for entrance doors
V4/2011
|Flat frame
559 mm
External perimeter
202 mm
Primary perimeter
x-x
71,72 cm4
Moment of inertia x-x
y-y
111,49 cm4
Moment of inertia y-y
2503 gr/m
Weight
290-11-503-00
Setting block
113-75-121-00 |outer
|Crimp nail cleat 113-75-196-00 |inner
160-11-875-91 |outer
Aluminium
160-11-275-91 |inner
transom-mullion cleat
180-25-010-00 |outer
Alignment corner
183
|Entrance Doors
European Groove
European Groove frame for entrance doors
167
160-11-813-91
160-11-813-91
165-11-002-00
|or
165-11-001-00
72,5
76,5
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
145
M11762
-|Frame-Kickplate
675 mm
External perimeter
316 mm
Primary perimeter
x-x
103,63 cm4
Moment of inertia x-x
y-y
393,26 cm4
Moment of inertia y-y
3677 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
|or
165-11-002-00
|left
Cast transom-mullion cleat
165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
184
V4/2011
1:1|Profiles1:1
180-25-060-00
68
113-33-274-00
M11518
125-33-270-00
|Round frame
538 mm
External perimeter
125 mm
Primary perimeter
x-x
67,96 cm4
Moment of inertia x-x
y-y
27,68 cm4
Moment of inertia y-y
1931 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
91,4
180-19-000-00
72,5
290-11-503-00
113-33-196-00
125-33-196-00
46
European Groove
European Groove frame for entrance doors
Aluminium spring cleat
Alignment corner
125-33-270-00 |outer
125-33-196-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
180-25-060-00
78,5
M11818
113-43-270-00
125-43-270-00
180-19-000-00
72,5
91,4
290-11-503-00
113-43-194-00
125-43-194-00
56,5
European Groove
European Groove frame for entrance doors
V4/2011
|Round frame
559 mm
External perimeter
146 mm
Primary perimeter
x-x
77,33 cm4
Moment of inertia x-x
y-y
44,91 cm4
Moment of inertia y-y
2148 gr/m
Weight
290-11-503-00
Setting block
113-43-270-00 |outer
|Crimp nail cleat 113-43-194-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00 |outer
125-43-194-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
185
|Entrance Doors
European Groove
European Groove frame for entrance doors
180-25-025-00
68
113-33-274-00
125-33-270-00
91,4
180-19-000-00
72,5
290-11-503-00
113-33-196-00
125-33-196-00
46
M11528
|Chamfered frame
545 mm
External perimeter
129 mm
Primary perimeter
x-x
69,68 cm4
Moment of inertia x-x
y-y
28,95 cm4
Moment of inertia y-y
1955 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Alignment corner
186
125-33-270-00 |outer
125-33-196-00 |inner
180-19-000-00 |outer
180-25-025-00 |outer
V4/2011
1:1|Profiles1:1
European Groove
European Groove frame for entrance doors
68
161,4
M11668
113-33-274-00
180-19-000-00
125-33-270-00
180-25-260-00
- |Round frame-column
679 mm
External perimeter
188 mm
Primary perimeter
x-x
236,28 cm4
Moment of inertia x-x
y-y
38,83 cm4
Moment of inertia y-y
2583 gr/m
Weight
290-11-503-00
Setting block
113-33-274-00 |outer
|Crimp nail cleat 113-33-196-00 |inner
Aluminium spring cleat
Alignment corner
72,5
290-11-503-00
125-33-270-00 |outer
125-33-196-00 |inner
180-19-000-00 |outer
180-25-260-00 |outer
113-33-196-00
125-33-196-00
46
M11164
250-11-165-01
35,3
14,4
250-11-663-01
V4/2011
|Beauty profile
143 mm
External perimeter
0 mm
Primary perimeter
x-x
0,13 cm4
Moment of inertia x-x
y-y
1,14 cm4
Moment of inertia y-y
309 gr/m
Weight
187
|Entrance Doors
19,4
73,5
M11662
180-11-801-00
|Beauty profile
281 mm
External perimeter
48 mm
Primary perimeter
x-x
28,41 cm4
Moment of inertia x-x
y-y
5,33 cm4
Moment of inertia y-y
1181 gr/m
Weight
180-11-801-00 |inner
Alignment corner
48,7
30,7
M11694
113-23-156-00
72,5
76,5
113-23-121-00
180-25-010-00
|Beauty profile
371 mm
External perimeter
57 mm
Primary perimeter
x-x
31,66 cm4
Moment of inertia x-x
y-y
9,18 cm4
Moment of inertia y-y
1267 gr/m
Weight
113-23-156-00 |outer
|Crimp nail cleat 113-23-121-00 |inner
180-25-010-00 |inner
Alignment corner
52,7
188
V4/2011
1:1|Profiles1:1
M11582
90,4
68,4
113-33-056-00
180-25-005-00
72,5
76,5
290-11-502-00
113-43-295-00
125-43-295-00
180-11-801-00
Sash specially for entrance doors
Flat sash for opening inward entrance door
402 mm
External perimeter
145 mm
Primary perimeter
x-x
54,46 cm4
Moment of inertia x-x
y-y
38,47 cm4
Moment of inertia y-y
1905 gr/m
Weight
290-11-502-00
Setting block
113-33-056-00 |outer
|Crimp nail cleat 113-43-295-00 |inner
125-43-295-00 |inner
Aluminium spring cleat
180-25-005-00 |outer
Alignment corner
180-11-801-00 |inner
104,4
82,4
113-57-093-00
72,5
76,5
M11968
113-57-290-00
180-11-801-00
82,4
Sash specially for entrance doors
V4/2011
Flat sash for opening inward entrance door
426 mm
External perimeter
174 mm
Primary perimeter
x-x
64,38 cm4
Moment of inertia x-x
y-y
64,21 cm4
Moment of inertia y-y
2228 gr/m
Weight
113-57-093-00 |outer
|Crimp nail cleat 113-57-290-00 |inner
180-11-801-00 |inner
Alignment corner
189
|Entrance Doors
Sash specially for entrance doors
117
95
113-43-056-00
180-25-005-00
72,5
76,5
290-11-502-00
113-57-290-00
95
M11636
Flat sash for opening inward entrance door
450 mm
External perimeter
198 mm
Primary perimeter
x-x
76,13 cm4
Moment of inertia x-x
y-y
97,09 cm4
Moment of inertia y-y
2482 gr/m
Weight
290-11-502-00
Setting block
113-43-056-00 |outer
|Crimp nail cleat 113-57-290-00 |inner
180-25-005-00 |outer
Alignment corner
190
V4/2011
1:1|Profiles1:1
90,4
M11882
68,4
113-33-074-00
180-25-005-00
180-11-801-00
72,5
76,5
290-11-502-00
113-43-295-00
125-43-295-00
68,4
Sash specially for entrance doors
Flat sash for open inward entrance door
404 mm
External perimeter
145 mm
Primary perimeter
x-x
52,81 cm4
Moment of inertia x-x
y-y
37,08 cm4
Moment of inertia y-y
1872 gr/m
Weight
290-11-502-00
Setting block
113-33-074-00 |outer
|Crimp nail cleat 113-43-295-00 |inner
Aluminium spring cleat
125-43-295-00 |inner
Alignment corner
180-25-005-00 |outer
180-11-801-00 |inner
104,4
81,9
113-43-128-00
180-25-005-00
180-11-801-00
72,5
84
290-11-502-00
113-57-290-00
82,4
Sash specially for entrance doors
V4/2011
M11734
Round sash for opening inward entrance door
482 mm
External perimeter
176 mm
Primary perimeter
x-x
81,90 cm4
Moment of inertia x-x
y-y
72,20 cm4
Moment of inertia y-y
2413 gr/m
Weight
290-11-502-00
Setting block
113-43-128-00 |outer
|Crimp nail cleat 113-57-290-00 |inner
180-25-005-00 |outer
Alignment corner
180-11-801-00 |inner
191
|Entrance Doors
90,4
M11584
113-43-056-00
180-25-005-00
180-11-801-00
72,5
76,5
290-11-502-00
113-43-220-00
125-43-220-00
55,9
Sash specially for entrance doors
90,4
180-25-005-00
290-11-502-00
72,5
76,5
Aluminium spring cleat
125-43-220-00 |inner
Alignment corner
180-25-005-00 |outer
180-11-801-00 |inner
M11884
113-33-074-00
113-43-220-00
125-43-220-00
55,9
Sash specially for entrance doors
192
Flat sash for opening outward entrance door
402 mm
External perimeter
145 mm
Primary perimeter
x-x
52,25 cm4
Moment of inertia x-x
y-y
38,73 cm4
Moment of inertia y-y
1924 gr/m
Weight
290-11-502-00
Setting block
113-43-056-00 |outer
|Crimp nail cleat 113-43-220-00 |inner
Flat sash for opening outward entrance door
422 mm
External perimeter
145 mm
Primary perimeter
x-x
51,14 cm4
Moment of inertia x-x
y-y
37,53 cm4
Moment of inertia y-y
1905 gr/m
Weight
290-11-502-00
Setting block
113-33-074-00 |outer
|Crimp nail cleat 113-43-220-00 |inner
Aluminium spring cleat
125-43-220-00 |inner
Alignment corner
180-25-005-00 |outer
V4/2011
1:1|Profiles1:1
104,4
113-570-93-00
72,5
76,5
M11966
113-57-224-00
69,9
Sash specially for entrance doors
90,4
M11880
113-33-074-00
180-25-005-00
72,5
76,5
290-11-502-00
113-43-220-00
125-43-220-00
55,9
Sash specially for entrance doors
V4/2011
Flat sash for opening outward entrance door
424 mm
External perimeter
174 mm
Primary perimeter
x-x
57,92 cm4
Moment of inertia x-x
y-y
63,52 cm4
Moment of inertia y-y
2160 gr/m
Weight
113-57-093-00 |outer
|Crimp nail cleat 113-57-224-00 |inner
Flat sash for opening outward entrance door
422 mm
External perimeter
140 mm
Primary perimeter
x-x
50,63 cm4
Moment of inertia x-x
y-y
37,33 cm4
Moment of inertia y-y
1904 gr/m
Weight
290-11-502-00
Setting block
113-33-074-00 |outer
|Crimp nail cleat 113-43-220-00 |inner
Aluminium spring cleat
Alignment corner
125-43-220-00 |inner
180-25-005-00 |outer
193
|Entrance Doors
82,4
58,4
113-43-056-00
M11754
75,5
71,5
180-11-801-00
113-57-290-00
Sash specially for entrance doors
M11670
73,8
21,8
310-11-670-00
300-21-656-03
300-21-656-13
300-21-872-03
300-21-872-13
250-11-170-01
194
|Flat sash
366 mm
External perimeter
86 mm
Primary perimeter
x-x
59,80 cm4
Moment of inertia x-x
y-y
56,49 cm4
Moment of inertia y-y
2098 gr/m
Weight
113-43-056-00 |outer
|Crimp nail cleat 113-57-290-00 |inner
180-11-801-00 |inner
Alignment corner
250-11-270-01
|Beauty profile
339 mm
External perimeter
23 mm
Primary perimeter
x-x
1,49 cm4
Moment of inertia x-x
y-y
23,52 cm4
Moment of inertia y-y
990 gr/m
Weight
300-11-670-00
300-21-656-03
300-21-656-13
End cap
300-21-872-03
300-21-872-13
V4/2011
1:1|Profiles1:1
M11228
|Beauty profile
159 mm
External perimeter
30 mm
Primary perimeter
x-x
0,33 cm4
Moment of inertia x-x
y-y
1,54 cm4
Moment of inertia y-y
331 gr/m
Weight
310-11-228-03
End cap
19,8
19,7
310-11-228-03
250-11-024-01
39,8
M11226
|Waterproofing profile
115 mm
External perimeter
30 mm
Primary perimeter
x-x
0,25 cm4
Moment of inertia x-x
y-y
0,48 cm4
Moment of inertia y-y
227 gr/m
Weight
310-21-226-03
End cap
310-21-226-03
19,8
19,7
250-11-226-01
26,6
96
63,2
113-33-156-00
M11538
180-25-150-00
84
72,5
290-11-501-00
113-43-270-00
180-20-010-03
125-43-270-00
74
European Groove
European Groove sash for entrance doors
V4/2011
European Groove|Flat sash for opening
inward entrance door for European Groove mechanism
482 mm
External perimeter
152 mm
Primary perimeter
x-x
68,51 cm4
Moment of inertia x-x
y-y
42,72 cm4
Moment of inertia y-y
2119 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
195
|Entrance Doors
96
63,2
M11548
113-33-156-00
180-25-017-00
72,5
84
290-11-501-00
113-43-270-00
180-20-010-03
125-43-270-00
74
European Groove
European Groove sash for entrance doors
European Groove|Round sash for opening
inward entrance door for European Groove mechanism
493 mm
External perimeter
148 mm
Primary perimeter
x-x
69,19 cm4
Moment of inertia x-x
y-y
45,53 cm4
Moment of inertia y-y
2163 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00 |inner
180-25-017-00 |outer
180-20-010-03 |inner
180-25-016-00
96
63
M11828
113-33-156-00
180-19-000-00
72,5
91,4
290-11-502-00
180-20-010-03
113-13-345-00
125-13-346-00
European Groove|Chamfered sash for opening
inward entrance door for European Groove mechanism
564 mm
External perimeter
161 mm
Primary perimeter
x-x
87,50 cm4
Moment of inertia x-x
y-y
54,83 cm4
Moment of inertia y-y
2335 gr/m
Weight
290-11-502-00
Setting block
113-15-156-00 |outer
|Crimp nail cleat 113-23-345-00 |inner
Aluminium spring cleat
125-23-345-00 |inner
Alignment corner
180-19-000-00 |outer
180-25-016-00 |outer
180-20-010-03 |inner
180-20-006-00 |inner
74
180-20-006-00
European Groove
European Groove sash for entrance doors
196
V4/2011
1:1|Profiles1:1
96,1
M11890
113-43-326-00
180-20-006-00
125-43-326-00
72,5
91,4
180-19-000-00
113-33-156-00
41,1
European Groove
European Groove sash for entrance doors
96
125-43-251-00
180-25-027-00
72,5
84
290-11-501-00
113-33-156-00
41
European Groove
European Groove sash for entrance doors
V4/2011
Aluminium spring cleat
Alignment corner
125-43-326-00 |outer
180-19-000-00 |outer
180-20-006-00 |outer
M11690
113-43-251-00
180-20-010-03
European Groove|Chamfered sash for opening
outward entrance door for European Groove mechanism
570 mm
External perimeter
161 mm
Primary perimeter
x-x
81,38 cm4
Moment of inertia x-x
y-y
51,65 cm4
Moment of inertia y-y
2219 gr/m
Weight
113-43-326-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
European Groove|Round sash for opening
outward entrance door for European Groove mechanism
498 mm
External perimeter
148 mm
Primary perimeter
x-x
65,90 cm4
Moment of inertia x-x
y-y
44,58 cm4
Moment of inertia y-y
2104 gr/m
Weight
290-11-501-00
Setting block
113-43-251-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
Aluminium spring cleat
Alignment corner
125-43-251-00 |inner
180-25-027-00 |outer
180-20-010-03 |outer
197
|Entrance Doors
51,4
72,5
290-11-503-00
76,5
M11644
|Beauty profile
376 mm
External perimeter
107 mm
Primary perimeter
x-x
30,47 cm4
Moment of inertia x-x
y-y
46,46 cm4
Moment of inertia y-y
1778 gr/m
Weight
290-11-503-00
Setting block
76,6
European Groove
European Groove sash for entrance doors
96
63
113-33-156-00
M11938
180-25-150-00
80
84
290-11-501-00
113-43-270-00
180-20-010-03
125-43-270-00
74
11590 11992
Sash divide only with M11590 transom and M11992 kickplate
198
European Groove|Flat sash for opening
inward entrance door for European Groove mechanism
482 mm
External perimeter
146 mm
Primary perimeter
x-x
68,57 cm4
Moment of inertia x-x
y-y
43,05 cm4
Moment of inertia y-y
2127 gr/m
Weight
290-11-501-00
Setting block
113-33-156-00 |outer
|Crimp nail cleat 113-43-270-00 |inner
Aluminium spring cleat
Alignment corner
125-43-270-00 |inner
180-25-150-00 |outer
180-20-010-03 |inner
V4/2011
1:1|Profiles1:1
European Groove
European Groove sash for entrance doors
96,1
M11893
113-43-251-00
180-20-010-03
125-43-251-00
80
84
290-11-501-00
113-33-156-00
41,1
11590 11992
Sash divide only with M11590 transom and M11992 kickplate
90
165-11-002-00
Aluminium spring cleat
Alignment corner
125-43-251-00 |outer
180-20-010-03 |outer
M11566
160-11-833-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-330-00
160-11-233-91
46
V4/2011
European Groove|Flat sash for opening
outward entrance door for European Groove mechanism
586 mm
External perimeter
145 mm
Primary perimeter
x-x
66,00 cm4
Moment of inertia x-x
y-y
42,38 cm4
Moment of inertia y-y
2085 gr/m
Weight
290-11-501-00
Setting block
113-43-251-00 |outer
|Crimp nail cleat 113-33-156-00 |inner
|Flat transom-mullion
527 mm
External perimeter
144 mm
Primary perimeter
x-x
50,87 cm4
Moment of inertia x-x
y-y
27,93 cm4
Moment of inertia y-y
1833 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
199
|Entrance Doors
90
165-11-002-00
160-11-833-91
M11766
165-11-001-00
72,5
76,5
290-11-503-00
46
|Flat transom-mullion
528 mm
External perimeter
144 mm
Primary perimeter
x-x
53,26 cm4
Moment of inertia x-x
y-y
28,64 cm4
Moment of inertia y-y
1919 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-833-91 |outer
Aluminium
transom-mullion cleat
90
M11770
165-11-002-00
165-11-001-00
72,5
76,5
290-11-503-00
|Flat transom-mullion
528 mm
External perimeter
144 mm
Primary perimeter
x-x
55,86 cm4
Moment of inertia x-x
y-y
29,56 cm4
Moment of inertia y-y
2036 gr/m
Weight
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
290-11-503-00
Setting block
46
200
V4/2011
1:1|Profiles1:1
M11726
95
160-11-838-91
165-11-002-00
165-11-001-00
72,5
76,5
290-11-503-00
160-11-238-91
51
|Flat transom-mullion
538 mm
External perimeter
154 mm
Primary perimeter
x-x
53,87 cm4
Moment of inertia x-x
y-y
35,19 cm4
Moment of inertia y-y
1923 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-838-91 |outer
Aluminium
160-11-238-91 |inner
transom-mullion cleat
118
165-11-002-00
160-11-861-91
165-11-001-00
72,5
76,5
290-11-503-00
160-11-261-91
74
M11886
V4/2011
|Flat transom-mullion
583 mm
External perimeter
200 mm
Primary perimeter
x-x
67,60 cm4
Moment of inertia x-x
y-y
82,68 cm4
Moment of inertia y-y
2348 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-861-91 |outer
Aluminium
160-11-261-91 |inner
transom-mullion cleat
201
|Entrance Doors
132
165-11-002-00
160-11-875-91
165-11-001-00
72,5
76,5
290-11-503-00
160-11-275-91
88
M11888
|Flat transom-mullion
612 mm
External perimeter
228 mm
Primary perimeter
x-x
75,98 cm4
Moment of inertia x-x
y-y
124,48 cm4
Moment of inertia y-y
2605 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-875-91 |outer
Aluminium
160-11-275-91 |inner
transom-mullion cleat
202
V4/2011
1:1|Profiles1:1
150
165-11-002-00
160-11-823-91 160-11-823-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-230-00 165-20-230-00
160-11-223-91 160-11-223-91
106
M11568
|Flat transom-mullion
645 mm
External perimeter
264 mm
Primary perimeter
x-x
90,73 cm4
Moment of inertia x-x
y-y
201,22 cm4
Moment of inertia y-y
3077 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-230-00 |inner
160-11-823-91 |outer
Aluminium
160-11-223-91 |inner
transom-mullion cleat
V4/2011
203
|Entrance Doors
10%|Miniaturization 10%
165-11-001-00
200
160-11-870-91
160-11-870-91
290-11-503-00
160-11-270-91
72,5
76,5
165-11-002-00
160-11-270-91
156
M11570
|Flat transom-mullion
750 mm
External perimeter
364 mm
Primary perimeter
x-x
498,20 cm4
Moment of inertia x-x
y-y
120,93 cm4
Moment of inertia y-y
3990 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-870-91 |outer
Aluminium
160-11-270-91 |inner
transom-mullion cleat
204
V4/2011
1:1|Profiles1:1
90
160-11-833-91
165-11-001-00
119,6
165-11-002-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11722
|Flat transom-mullion
616 mm
External perimeter
230 mm
Primary perimeter
x-x
134,89 cm4
Moment of inertia x-x
y-y
43,85 cm4
Moment of inertia y-y
2468 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
V4/2011
205
|Entrance Doors
165-11-002-00
160-11-833-91
165-11-001-00
126,5
90
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11874
|Flat transom-mullion
629 mm
External perimeter
244 mm
Primary perimeter
x-x
133,40 cm4
Moment of inertia x-x
y-y
41,56 cm4
Moment of inertia y-y
2369 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
206
V4/2011
1:1|Profiles1:1
165-11-002-00
160-11-833-91
139,6
90
165-11-001-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11732
|Flat transom-mullion
656 mm
External perimeter
270 mm
Primary perimeter
x-x
195,34 cm4
Moment of inertia x-x
y-y
49,71 cm4
Moment of inertia y-y
2630 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
V4/2011
207
|Entrance Doors
90
160-11-833-91
165-11-001-00
122,5
165-11-002-00
72,5
290-11-503-00
165-20-330-00
160-11-233-91
46
M11688
|Round transom-mullion
609 mm
External perimeter
206 mm
Primary perimeter
x-x
124,76 cm4
Moment of inertia x-x
y-y
46,85 cm4
Moment of inertia y-y
2465 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
208
V4/2011
1:1|Profiles1:1
90
165-11-002-00
160-11-833-91
165-11-001-00
141,5
M11578
72,5
290-11-503-00
|Flat transom-mullion
645 mm
External perimeter
243 mm
Primary perimeter
x-x
174,17 cm4
Moment of inertia x-x
y-y
51,98 cm4
Moment of inertia y-y
2622 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-330-00 |inner
160-11-833-91 |outer
Aluminium
160-11-233-91 |inner
transom-mullion cleat
165-20-330-00
160-11-233-91
46
80
165-11-002-00
M11590
165-11-001-00
160-11-823-91
80
84
290-11-503-00
165-20-230-00
160-11-223-91
36
84mm
Divides only 84mm width sashes
V4/2011
|Flat transom-mullion
523 mm
External perimeter
124 mm
Primary perimeter
x-x
55,71 cm4
Moment of inertia x-x
y-y
17,03 cm4
Moment of inertia y-y
1747 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-230-00 |inner
160-11-823-91 |outer
Aluminium
160-11-223-91 |inner
transom-mullion cleat
209
|Entrance Doors
137
160-11-813-91
160-11-813-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
115
M11842
|Kickplate
599 mm
External perimeter
256 mm
Primary perimeter
x-x
85,29 cm4
Moment of inertia x-x
y-y
132,39 cm4
Moment of inertia y-y
2708 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
210
V4/2011
1:1|Profiles1:1
142
160-11-813-91
160-11-813-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
120
M11942
|Kickplate
610 mm
External perimeter
266 mm
Primary perimeter
x-x
88,43 cm4
Moment of inertia x-x
y-y
150,53 cm4
Moment of inertia y-y
2803 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
V4/2011
211
|Entrance Doors
152
160-11-813-91
160-11-813-91
165-11-001-00
72,5
76,5
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
130
M11642
|Kickplate
708 mm
External perimeter
286 mm
Primary perimeter
x-x
94,69 cm4
Moment of inertia x-x
y-y
191,24 cm4
Moment of inertia y-y
2993 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
212
V4/2011
1:1|Profiles1:1
152
160-11-813-91
160-11-813-91
165-11-001-00
72,5
76,5
290-11-503-00
130
M11742
|Kickplate
629 mm
External perimeter
286 mm
Primary perimeter
x-x
98,34 cm4
Moment of inertia x-x
y-y
200,24 cm4
Moment of inertia y-y
3112 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
Cast transom-mullion cleat 165-11-002-00 |left
160-11-813-91 |outer
Aluminium
transom-mullion cleat
V4/2011
213
|Entrance Doors
152
160-11-890-91
72,5
76,5
290-11-503-00
160-11-290-91
130
M11982
|Kickplate
629 mm
External perimeter
286 mm
Primary perimeter
x-x
92,47 cm4
Moment of inertia x-x
y-y
187,13 cm4
Moment of inertia y-y
2853 gr/m
Weight
290-11-503-00
Setting block
160-11-890-91 |outer
Aluminium
160-11-290-91 |inner
transom-mullion cleat
214
V4/2011
1:1|Profiles1:1
84mm
Divides only 84mm width sashes
142
165-11-001-00
160-11-813-91
80
84
290-11-503-00
165-20-130-00
165-20-130-00
160-11-213-91
160-11-213-91
120
M11992
|Kickplate
623 mm
External perimeter
266 mm
Primary perimeter
x-x
104,35 cm4
Moment of inertia x-x
y-y
153,63 cm4
Moment of inertia y-y
2830 gr/m
Weight
290-11-503-00
Setting block
165-11-001-00 |right
165-11-002-00 |left
Cast transom-mullion cleat 165-20-130-00 |inner
160-11-813-91 |outer
Aluminium
160-11-213-91 |inner
transom-mullion cleat
M11724
310-11-734-03
310-11-524-00
29,6
77,7
V4/2011
|Beauty profile
262 mm
External perimeter
49 mm
Primary perimeter
x-x
2,10 cm4
Moment of inertia x-x
y-y
26,75 cm4
Moment of inertia y-y
966 gr/m
Weight
310-11-734-03
310-11-524-00
End cap
215
|Entrance Doors
41,7
15,5
10
7,3
M11140
|Beauty profile
124 mm
External perimeter
10 mm
Primary perimeter
x-x
2,11 cm4
Moment of inertia x-x
y-y
0,11 cm4
Moment of inertia y-y
253 gr/m
Weight
250-11-226-01
M11227
|Beauty profile
34 mm
External perimeter
26 mm
Primary perimeter
x-x
0,00 cm4
Moment of inertia x-x
y-y
0,01 cm4
Moment of inertia y-y
53 gr/m
Weight
22
21,4
20
12,3
250-11-170-01
M11210
|Beauty profile
110 mm
External perimeter
0 mm
Primary perimeter
x-x
0,27 cm4
Moment of inertia x-x
y-y
0,16 cm4
Moment of inertia y-y
286 gr/m
Weight
216
250-11-170-01
M11211
|Beauty profile
126 mm
External perimeter
0 mm
Primary perimeter
x-x
0,50 cm4
Moment of inertia x-x
y-y
0,46 cm4
Moment of inertia y-y
268 gr/m
Weight
V4/2011
1:1|Profiles1:1
M11281
|Beauty profile
118 mm
External perimeter
12 mm
Primary perimeter
x-x
0,11 cm4
Moment of inertia x-x
y-y
0,65 cm4
Moment of inertia y-y
232 gr/m
Weight
310-11-281-00
End cap
11,7
26,6
310-11-281-00
65,4
M11658
72,5
79,8
300-11-658-00
1497 gr/m
Weight
300-11-658-00
End cap
32,8
65,4
M11758
72,5
87,3
300-11-758-03
V4/2011
32,8
European Groove|Round
sash invertion profile for European Groove mechanism
510 mm
External perimeter
68 mm
Primary perimeter
x-x
43,48 cm4
Moment of inertia x-x
y-y
11,49 cm4
Moment of inertia y-y
1565 gr/m
Weight
300-11-758-03
End cap
217
|Entrance Doors
39
M11656
74,9
300-11-656-03
300-11-656-13
300-21-656-03
300-21-656-13
U24x10
1132 gr/m
Weight
300-11-656-03
300-11-656-13
300-21-656-03
End cap
300-21-656-13
26,5
39
M11872
74,9
U24x10
300-11-872-00
300-11-872-10
300-21-872-03
300-21-872-13
1117 gr/m
Weight
End cap
300-11-872-00
300-11-872-10
300-21-872-03
300-21-872-13
26,5
218
V4/2011
1:1|Profiles1:1
310-11-684-03
10
64,8
17,5
24
U-24x10x2
M11684
|Beauty profile
83 mm
External perimeter
44 mm
Primary perimeter
x-x
0,07 cm4
Moment of inertia x-x
y-y
0,62 cm4
Moment of inertia y-y
216 gr/m
Weight
|Threshold
165 mm
External perimeter
37 mm
Primary perimeter
x-x
1,01 cm4
Moment of inertia x-x
y-y
14,57 cm4
Moment of inertia y-y
895 gr/m
Weight
310-11-684-03
End cap
310-11-674-01
310-11-674-00
310-11-674-10
310-11-774-00
310-11-774-10
59,2
18,5
23,9
69
M11674
|Threshold
176 mm
External perimeter
105 mm
Primary perimeter
x-x
2,95 cm4
Moment of inertia x-x
y-y
16,62 cm4
Moment of inertia y-y
1067 gr/m
Weight
310-11-674-01
310-11-674-00
End cap
310-11-674-10
V4/2011
M11774
|Threshold
180 mm
External perimeter
19 mm
Primary perimeter
x-x
1,11 cm4
Moment of inertia x-x
y-y
17,62 cm4
Moment of inertia y-y
920 gr/m
Weight
310-11-774-00
310-11-774-10
End cap
219
|Entrance Doors
220
V4/2011
|Entrance Doors
|Basic Typologies
V4/2011
221
|Entrance Doors
|One sash
opening inward entrance door
|One sash opening
inward entrance door with one fixed sash
Two sash opening inward entrance door
1, 2,
3, 4
|One sash opening
inward entrance door with kickplate
|One sash opening inward
entrance door with kickplate with one fixed sash
7, 8,
9, 10
11
12, 13,
14
|One sash
opening outward entrance door
|One sash opening
outward entrance door with one fixed sash
Two sash opening outward entrance door
15, 16
17
18, 19
|One sash opening
outward entrance door with kickplate
|One sash opening outward
entrance door with kickplate with one fixed sash
222
|Two sash opening
inward entrance door with kickplate
|Two sash opening
outward entrance door with kickplate
20, 21,
22
23
24, 25
V4/2011
|Entrance Doors
1:2|Sections 1:2
V4/2011
223
|Entrance Doors
A
One sash opening
inward entrance door
M11586
M11786
220-11-002-01
1
|Profile cuttings
11586|Frame 11586
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-66mm
2.|pieces
11674
Threshold M11674
Tw=Fw-126mm
1.|piece
11670
Sash beauty profile M11670
Aw=Sw-47,6mm
1.|piece
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-2Y
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
Sh
290-00-005-00
M11582
M11636
M11734
M11968
M11670
250-11-170-01
250-11-270-01
M11674
15
Glazing width
GBHop
Frame height
202-11-151-01
200-11-156-01
Fh
Fw
15
Frame width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
224
Y
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
Seal gasket
Fw+2Fh+Sw+2Sh
|Meters
202-11-151-01
According to the glazing width
220-11-002-01
M11674
250-11-170-01
M11670
M11670 beauty
Sw |Meters
profile gasket
250-11-270-01
M11670
M11670 beauty
Sw |Meters
profile gasket
310-11-670-00
310-11-674-00
According to the sash
290-00-005-00
M11670
End cap for beauty
profile M11670
M11674
End cap for M11674
threshold
310-11-674-00
M11674
1 |pair
1 |pair
63
Tw
Fw
310-11-674-00
4.|pieces
4.|pieces
310-11-670-00
M11670
310-11-670-00
ISO 7050 st 4,2x25
M11670
23,8
Aw
23,8
Sw
V4/2011
225
|Entrance Doors
A
One sash opening
inward entrance door
A
M11586
M11786
B
220-11-002-01
2
|Profile cuttings
11586|Frame 11586
Frame width
Fw
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-61mm
2.|pieces
11684
Threshold M11684
Tw=Fw-132mm
1.|piece
11228
Sash beauty profile M11228
Aw=Sw-48mm
1.|piece
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-2Y
Glazing height
Sh
290-00-005-00
M11582
M11636
M11734
M11968
M11228
Gw=GBWop-14mm
250-11-024-01
M11684
Gh=GBHop-14mm
10
Glazing width
GBHop
Fh
Frame height
202-11-151-01
200-11-156-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
226
Y
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
2.|pieces
ISO 7050 st 4,2x25
202-11-151-01
According to the glazing width
M11684
310-11-684-03
Seal gasket
220-11-002-01
Fw+2Fh+Sw+2Sh
|Meters
M11684
M11228
M11228 beauty
Sw |Meters
profile gasket
250-11-024-01
310-11-228-03
M11228
End cap for beauty
profile M11228
1 |pair
310-11-684-03
M11684
End cap for M11684
threshold
1 |pair
According to the sash
290-00-005-00
66
Tw
310-11-684-03
Fw
4.|pieces
Setting block
4.|pieces
M11226
M11228
310-21-226-03
M11228
310-11-228-03
310-11-228-03
24
Aw
Sw
V4/2011
227
|Entrance Doors
A
One sash opening
inward entrance door
A
M11586
M11786
B
220-11-002-01
3
|Profile cuttings
11586|Frame 11586
Frame width
Fw
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-57mm
2.|pieces
11774
Threshold M11774
Tw=Fw-139mm
1.|piece
11226
Sash beauty profile M11226
Aw=Sw-48mm
1.|piece
290-00-005-00
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
M11582
M11636
M11734
M11968
GBHop=Sh-2Y
M11226
Glazing height
Gw=GBWop-14mm
250-11-226-01
M11774
Gh=GBHop-14mm
Glazing width
Sh
GBHop
Fh
Frame height
202-11-151-01
200-11-156-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
228
Y
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
Seal gasket
Fw+2Fh+Sw+2Sh
|Meters
2.|pieces
ISO 7050 st 4,2x25
202-11-151-01
According to the glazing width
220-11-002-01
M11774
310-11-774-00
M11774
250-11-226-01
M11226
M11226 beauty
Sw |Meters
profile gasket
310-21-226-03
M11226
End cap for beauty
profile M11226
1 |pair
310-11-774-00
M11774
End cap for M11774
threshold
1 |pair
4.|pieces
Setting block
4.|pieces
According to the sash
290-00-005-00
69,5
Tw
310-11-774-00
Fw
M11226
310-21-226-03
310-21-226-03
Aw
Sw
V4/2011
229
|Entrance Doors
A
One sash sash opening
inward entrance door
A
M11586
M11786
B
220-11-002-01
220-15-001-01
4
|Profile cuttings
11586|Frame 11586
Frame width
Fw
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-57mm
2.|pieces
11774
Threshold M11774
Tw=Fw-139mm
1.|piece
11226
Sash beauty profile M11226
Aw=Sw-48mm
1.|piece
Glazing bead width
GBWop=Sw-136,8mm
Glazing bead height
GBHop=Sh-136,8mm
Glazing height
Sh
290-00-005-00
M11882
M11226
Gw=GBWop-14mm
250-11-226-01
M11774
Gh=GBHop-14mm
Glazing width
GBHop
Fh
Frame height
202-11-151-01
200-11-156-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
230
Y
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
220-11-002-01
Seal gasket
2Sw+2Sh
|Meters
220-15-001-01
Seal gasket
Fw+2Fh
|Meters
202-11-151-01
According to the glazing width
250-11-226-01
M11226
End cap for beauty
profile M11226
1 |pair
310-11-774-00
M11774
End cap for M11774
threshold
1 |pair
4.|pieces
Setting block
4.|pieces
290-00-005-00
310-11-774-00
M11774
M11226
M11226 beauty
Sw |Meters
profile gasket
310-21-226-03
According to the sash
M11774
69,5
Tw
310-11-774-00
Fw
M11226
310-21-226-03
310-21-226-03
Aw
Sw
V4/2011
231
|Entrance Doors
A
B
One sash opening
inward entrance door
with one fixed sash
C
5
|Profile cuttings
11514|Frame 11514
1.|piece
Fh
1.|piece
|Sash width
Sw=Ws-X-T/2-10mm
2.|pieces
|Sash height
Sh=Fh-X-20mm
2.|pieces
Tw=Ws-T/2-80mm
1.|piece
Ht=Fh-X+4,5mm
1.|piece
|Kickplate
Pw=GBWop+9mm
Glazing bead width
Glazing bead height
Glazing bead width
Glazing bead height
Aw=Sw-47,6mm
1.|piece
Wr=Ws-X-T/2+9,8mm
1.|piece
Hr=Fh-X+4,9mm
1.|piece
Hr=Fh-X+4,9mm
1.|piece
Fh
11670
Sash beauty profile M11670
11164|Frame beauty
profile width M11164
11164|Frame beauty
profile height M11164
202-11-151-01
1.|piece 200-11-156-01
Fh
|Transom-mullion
220-11-002-01
GBHop
11674
Threshold M11674
Fh
|Frame height
GBHTop
1.|piece
Fw
Sh
|Frame width
M11514
M11518
M11814
M11818
M11906
M11910
250-11-165-01
GBWop=Sw-2Y
290-00-005-00
GBHTop=Fh-X-K
|Glazing width
Gw=GBWop-14mm
|Glazing height
Gh=GBHop-14mm
|Glazing width
Gwt=GBWTop-14mm
|Glazing height
Ght=GBHTop-14mm
M11670
250-11-170-01
250-11-270-01
M11674
M11582
M11636
M11734
M11968
15
GBWTop=Wt-X-T/2
M11842
M11642
M11742
M11942
M11982
15
GBHop=Sh-2Y
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
Ws
M11164
GBWop
X
232
Wt
M11566
250-11-663-01
Sw
GBWTop
T
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
2.|pieces
Frame crimp cleats
According to the frame
2.|pieces
Frame alignment corners
According to the frame
4.|pieces
Sash crimp nail cleats
According to the sash
4.|pieces
Sash alignment corners
According to the sash
2Sw+2Sh+2Fh+2Wt
202-11-151-01
Outer glazing gasket
|Meters
2Sw+2Sh+2Fh+2Wt
Inner glazing gasket
|Meters
According to the glazing width
Fw+2Fh
220-11-002-01
Seal gasket
|Meters
M11670
M11670 beauty
Sw |Meters
250-11-170-01
profile gasket
M11670
M11670 beauty
Sw |Meters
250-11-270-01
profile gasket
2Fh+Ws
250-11-663-01
|Meters
Gasket
2Fh+Ws
250-11-165-01
|Meters
Gasket
x2.|pieces
Kickplate cleat
According to the kickplate
|According
x1.|pieces
Transom-mullion cleat
to the transom-mullion
M11670
End cap for beauty
1 |pair
310-11-670-00
profile M11670
310-11-674-00
According to the sash
According to the kickplate
290-00-005-00
M11674
End cap for M11674 threshold
Sash setting block
Kickplate setting block
Setting block
M11674
310-11-674-00
ISO 7050 st 4,8x25
Ws
M11674
17
Tw
310-11-674-00
63
1 |pair
4.|pieces
2.|pieces
6.|pieces
310-11-670-00
310-11-670-00
M11670
M11670
23,8
Aw
23,8
Sw
V4/2011
233
|Entrance Doors
A
Two sash opening
inward entrance door
M11586
M11786
220-11-002-01
|Profile cuttings
Fh
1.|piece
Fh
1.|piece
Sw=Fw/2-53,5mm
4.|pieces
Sh=Fh-66mm
4.|pieces
Ha=Sh-30,6mm
1.|piece
Tw=Fw-126mm
1.|piece
Aw=Sw-47,6mm
2.|pieces
Sash width
Sash height
11656
Sash invertion profile M11656
11674
Threshold M11674
11670
Sash beauty profile M11670
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-2Y
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
290-00-005-00
M11582
M11636
M11734
M11968
M11670
250-11-170-01
250-11-270-01
M11674
15
Frame height
Sh
1.|piece
GBHop
Fw
15
Frame width
Fh
202-11-151-01
200-11-156-01
11586|Frame 11586
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
M11656
U-24x10x2
GBWop
Sw
234
Y
Sw
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
8.|pieces
According to the sash
Sash alignment corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
Inner glazing gasket
4Sw+4Sh
|Meters
220-11-002-01
Seal gasket
Fw+2Fh+Sw+2Sh+Ha
|Meters
250-11-170-01
M11670
M11670 beauty
profile gasket
Sw |Meters
250-11-270-01
M11670
M11670 beauty
profile gasket
Sw |Meters
According to the glazing width
300-21-656-03
|Right set
300-21-656-13
|Left set
310-11-670-00
310-11-674-00
According to the sash
290-00-005-00
M11674
310-11-674-00
M11674
310-11-674-00
63
Tw
Fw
310-11-670-00
310-11-670-00
11656
M11670
End cap for sash invertion
profile M11656
with the use of M11670
1 |pair
M11670
End cap for beauty
profile M11670
2 |pairs
M11674
End cap for M11674 threshold
1 |pair
Sash setting block
8.|pieces
Setting block
8.|pieces
M11670
23,8
23,8
Aw
Sw
300-21-656-03
24
202-11-151-01
24
300-21-656-03
Ha
Ha
M11656
M11656
U-24x10x2
310-11-670-00
ISO 7050 st 4,2x19
M11670
300-21-656-03
M11670
Aw
V4/2011
300-21-656-03
235
|Entrance Doors
A
A
One sash opening
inward entrance
door with kickplate
M11586
M11786
220-11-002-01
M11582
M11636
M11734
M11968
|or
|Profile cuttings
11586|Frame 11586
** 11674
**Threshold M11674
Kickplate
1.|piece
Sw=Fw-102mm
1.|piece
Sh=Fh-61mm
1.|piece
Sh=Fh-61mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
1.|piece
Fh
Fh
GBHop
1.|piece
290-00-005-00
M11842
M11642
M11742
M11942
M11982
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-Y-K
7,8
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
7,4
M11674
20
Sash height
Fh
202-11-151-01
200-11-156-01
Sh
Sash width
1.|piece
Frame height
Fw
10
Frame width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
236
: **|Note: **Alternative
Y
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Code Nr
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
ISO 7050 st 4,2x25
Outer glazing gasket
Sw+2Sh+Pw
|Meters
Inner glazing gasket
Sw+2Sh+Pw
|Meters
Seal gasket
Fw+2Fh+Sw+2Sh
|Meters
Kickplate cleat
x2.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
2.|pieces
According to the sash
3.|pieces
According to the kickplate
1.|piece
Setting block
4.|pieces
202-11-151-01
According to the glazing width
M11674
220-11-002-01
According to the kickplate
**310-11-674-00
290-00-005-00
310-11-674-00
M11674
63
V4/2011
Tw
Fw
: **|Note: **Alternative
310-11-674-00
237
|Entrance Doors
A
A
One sash opening
inward entrance
door with kickplate
M11586
M11786
7,8
7,4
10
220-11-002-01
220-15-001-01
M11882
|or
|Profile cuttings
11586|Frame 11586
Sash height
** 11674
**Threshold M11674
Kickplate
Fh
1.|piece
Sw=Fw-102mm
1.|piece
Sh=Fh-61mm
1.|piece
Sh=Fh-61mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
1.|piece
Fh
1.|piece
GBHop
Fh
202-11-151-01
200-11-156-01
290-00-005-00
Sh
Sash width
1.|piece
M11842
M11642
M11742
M11942
M11982
Frame height
Fw
Glazing bead width
GBWop=Sw-136,8mm
Glazing bead height
GBHop=Sh-68,4mm-K
7,8
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11674
20
Glazing width
7,4
10
Frame width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
238
: **|Note: **Alternative
Y
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Code Nr
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
Sw+2Sh+Pw
|Meters
Inner glazing gasket
Sw+2Sh+Pw
|Meters
220-11-002-01
Seal gasket
Sw+2Sh
|Meters
220-15-001-01
Seal gasket
Fw+2Fh
|Meters
202-11-151-01
According to the glazing width
M11674
According to the kickplate
Kickplate cleat
x2.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
2.|pieces
According to the sash
3.|pieces
According to the kickplate
1.|piece
Setting block
4.|pieces
**310-11-674-00
290-00-005-00
310-11-674-00
M11674
63
V4/2011
Tw
Fw
: **|Note: **Alternative
310-11-674-00
239
|Entrance Doors
A
A
One sash opening
inward entrance
door with kickplate
M11586
M11786
7,8
5,9
220-11-002-01
M11582
M11636
M11734
M11968
|or
|Profile cuttings
11586|Frame 11586
** 11674
**Threshold M11674
Kickplate
11210
Beauty profile M11210
11211
Beauty profile M11211
Glazing bead width
Glazing bead height
Glazing width
Glazing height
1.|piece
Fh
1.|piece
Sw=Fw-102mm
1.|piece
Sh=Fh-61mm
1.|piece
Sh=Fh-61mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
1.|piece
Bw=Sw-33mm
2.|pieces
Cw=GBWop
2.|pieces
Fh
GBHop
290-00-005-00
M11842
M11642
M11742
M11942
M11982
GBWop=Sw-2Y
M11211
M11210
GBHop=Sh-Y-K
7,8
5,9
250-11-170-01
Gw=GBWop-14mm
M11674
20
Sash height
Fh
202-11-151-01
200-11-156-01
Sh
Sash width
1.|piece
Frame height
Fw
10
Frame width
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Sw
240
: **|Note: **Alternative
Y
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
2.|pieces
Frame crimp cleats
According to the frame
2.|pieces
Frame alignment corners
According to the frame
2.|pieces
Sash crimp nail cleats
According to the sash
2.|pieces
Sash alignment corners
According to the sash
Sw+2Sh+Pw
202-11-151-01
Outer glazing gasket
|Meters
Sw+2Sh+Pw
Inner glazing gasket
|Meters
According to the glazing width
Fw+2Fh+Sw+2Sh
220-11-002-01
Seal gasket
|Meters
M11210
M11210 beauty
Sw |Meters
250-11-170-01
profile gasket
x2.|pieces
Kickplate cleat
According to the kickplate
M11674
1 |pair
**310-11-674-00
End cap for M11674 threshold
M11211
1 |pair
310-11-211-00
End cap for M11211 profile
2.|pieces
According to the sash width
Windshield
3.|pieces
Sash setting block
According to the sash
1.|piece
|Kickplate setting block
According to the kickplate
4.|pieces
290-00-005-00
Setting block
M11674
M11674
63
32
32
27,45
16
Tw
Fw
M11582
M11636
M11734
M11968
M11582
M11636
M11734
M11968
16
310-11-674-00
310-11-674-00
M11642
M11742
M11842
M11942
M11982
310-11-211-00
7,55
M11211
M11210
ISO 7049 st 5,5x19
M11211
16,5
V4/2011
Cw
Bw
Sw
M11210
: **|Note: **Alternative
241
|Entrance Doors
M11514
M11518
M11814
M11818
M11906
M11910
220-11-002-01
A
One sash opening
inward entrance
door with kickplate
210-11-500-01
10
220-11-001-01
10
|or
|Profile cuttings
M11538
|Sashes
European Groove
11514|Frame 11514
Frame width
Fw
1.|piece
Fh
1.|piece
Fh
1.|piece
Sw=Fw-2X+12mm
1.|piece
Sh=Fh-X-4mm
1.|piece
M11842
Sh=Fh-X-4mm
1.|piece
** 11674
**Threshold M11674
M11642
M11742
M11942
M11982
Tw=Fw-2X-14mm
1.|piece
Kickplate
Pw=GBWop+9mm
1.|piece
Fh
GBHop
Frame height
202-11-151-01
200-11-156-01
Sh
K
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-Y-K
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11674
20
Sash height
290-00-005-00
10
Sash width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
X
GBWop
Sw
242
: **|Note: **Alternative
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
Sw+2Sh+Pw
|Meters
Inner glazing gasket
Sw+2Sh+Pw
|Meters
220-11-002-01
Seal gasket
Sw+2Sh
|Meters
220-11-001-01
Seal gasket
Fw+2Fh
|Meters
210-11-500-01
Central seal gasket
Fw+2Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
Kickplate cleat
x2.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
1.|piece
According to the sash
3.|pieces
According to the kickplate
1.|piece
Setting block
4.|pieces
202-11-151-01
According to the glazing width
M11674
According to the kickplate
**310-11-674-01
290-00-005-00
310-11-674-01
ISO 7050 st 4,8x25
M11674
V4/2011
Tw
Fw
: **|Note: **Alternative
310-11-674-01
243
|Entrance Doors
A
B
One sash opening inward
entrance door with kickplate
with one fixed sash
C
11
Fh
1.|piece
Fh
1.|piece
|Sash width
Sw=Ws-X-T/2+12mm
|Sash height
Sh=Fh-X-4mm
2.|pieces M11538
2.|pieces |Sashes
1.|piece
|Kickplate
Pw=GBWTop+9mm
1.|piece
|Kickplate
Pw=GBWop+9mm
1.|piece
Aw=GBWTop
2.|pieces
202-11-151-01
200-11-156-01
Fh
Ht=Fh-X+4,5mm
Fh
|Transom-mullion
GBHop
1.|piece
290-00-005-00
GBWop=Sw-2Y
M11842
Glazing bead height
GBHop=Sh-Y-K
Glazing bead width
GBWTop=Wt-X-T/2
M11642
M11742
M11942
M11982
Glazing bead height
GBHTop=Fh-X-K
Gw=GBWop-14mm
|Glazing height
Gh=GBHop-14mm
|Glazing width
Gwt=GBWTop-14mm
|Glazing height
Ght=GBHTop-14mm
M11674
20
|Glazing width
Glazing bead width
Sh
Tw=Ws--T/2-14mm
GBHTop
European Groove
** 11674
**Threshold M11674
|Kickplate
beauty profile M11140
210-11-500-01
220-11-001-01
10
|Frame height
Fw
|Profile cuttings
11514|Frame 11514
|Frame width
A
M11514
M11518 M11814
M11818 M11906
1.|piece M11910
220-11-002-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
Ws
Wt
M11566
GBWop
T
|Transoms
European Groove
GBWTop
Sw
244
: **|Note: **Alternative
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Code Nr
Frame crimp cleats
According to the frame
Quantity
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
Inner glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
220-11-002-01
Seal gasket
Sw+2Sh
|Meters
220-11-001-01
Seal gasket
Ws+2Fh
|Meters
210-11-500-01
Central seal gasket
Ws+2Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
|According
to the transom-mullion
Transom-mullion cleat
x1.|piece
According to the kickplate
Kickplate cleat
x4.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
1.|piece
According to the sash
Sash setting block
4.|pieces
According to the kickplate
Kickplate setting block
2.|pieces
Setting block
6.|pieces
202-11-151-01
According to the glazing width
**310-11-674-01
290-00-005-00
M11674
310-11-674-01
ISO 7050 st 4,8x25
Ws
M11674
Tw
T
310-11-674-01
V4/2011
: **|Note: **Alternative
245
|Entrance Doors
A
A
M11586
M11786
220-11-002-01
12
M11582
M11636
M11734
M11968
|Two sash opening
inward entrance door with kickplate
|or
|Profile cuttings
11586|Frame 11586
Fh
1.|piece
Fh
1.|piece
Sw=Fw/2-53,5mm
2.|pieces
Sh=Fh-61mm
2.|pieces
Sh=Fh-61mm
2.|pieces
Ha=Sh-31mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
2.|pieces
Frame height
11656
Sash invertion profile M11656
** 11674
**Threshold M11674
Kickplate
290-00-005-00
M11842
M11642
M11742
M11942
M11982
Sash height
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-Y-K
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
7,4
M11674
20
Glazing width
7,8
10
Sash width
Fh
1.|piece
GBHop
Fw
Sh
Frame width
202-11-151-01
200-11-156-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
M11656
U-24x10x2
GBWop
Sw
246
Y
Sw
: **|Note: **Alternative
51
V4/2011
1:2|Sections 1:2
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+4Sh+2Pw
|Meters
Inner glazing gasket
2Sw+4Sh+2Pw
|Meters
Seal gasket
Fw+2Fh+2Sw+2Sh+Ha
|Meters
Kickplate cleat
x4.|pieces
Code Nr
|Accessory cuttings
Description
Accessory
11656
End cap for sash invertion
profile M11656
1 |pair
U-24x10x2
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
4.|pieces
According to the sash
6.|pieces
According to the kickplate
2.|pieces
Setting block
8.|pieces
24
300-11-656-03
According to the glazing width
220-11-002-01
According to the kickplate
300-11-656-03
|Right set
300-11-656-13
|Left set
**310-11-674-00
290-00-005-00
M11582
M11636
M11734
M11968
M11656
Ha
202-11-151-01
M11642
M11742
M11842
M11942
M11982
M11674
310-11-674-00
63
: **|Note: **Alternative
Tw
Fw
310-11-674-00
247
|Entrance Doors
A
A
M11586
M11786
13
M11882
|Two sash opening
inward entrance door with kickplate
220-11-002-01
220-15-001-01
|or
|Profile cuttings
11586|Frame 11586
Fh
1.|piece
Fh
1.|piece
Sw=Fw/2-53,5mm
2.|pieces
Sh=Fh-61mm
2.|pieces
Sh=Fh-61mm
2.|pieces
Ha=Sh-31mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
2.|pieces
Frame height
11656
Sash invertion profile M11656
** 11674
**Threshold M11674
Kickplate
290-00-005-00
M11842
M11642
M11742
M11942
M11982
Sash height
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-Y-K
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
7,4
M11674
20
Glazing width
7,8
10
Sash width
Fh
1.|piece
GBHop
Fw
Sh
Frame width
202-11-151-01
200-11-156-01
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
M11656
U-24x10x2
GBWop
Sw
248
Y
Sw
: **|Note: **Alternative
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+4Sh+2Pw
|Meters
Inner glazing gasket
2Sw+4Sh+2Pw
|Meters
220-11-002-01
Seal gasket
2Sw+2Sh
|Meters
220-15-001-01
Seal gasket
Fw+2Fh+Ha
|Meters
Kickplate cleat
x4.|pieces
M11882
M11656
According to the glazing width
Ha
202-11-151-01
24
300-11-656-03
According to the kickplate
300-11-656-03
U24x10x2
11656
End cap for sash invertion
profile M11656
1 |pair
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
4.|pieces
According to the sash
6.|pieces
According to the kickplate
2.|pieces
Setting block
8.|pieces
|Right set
300-11-656-13
|Left set
**310-11-674-00
290-00-005-00
M11642
M11742
M11842
M11942
M11982
300-11-656-03
M11674
310-11-674-00
63
: **|Note: **Alternative
Tw
Fw
310-11-674-00
249
|Entrance Doors
M11514
M11518
M11814
M11818
M11906
M11910
220-11-002-01
210-11-500-01
220-11-001-01
Y
10
B
14
|Two sash opening
inward entrance door with kickplate
|Profile cuttings
|or
202-11-151-01
200-11-156-01
11514|Frame 11514
1.|piece
Fh
1.|piece
Fh
1.|piece
Sw=Fw/2-X+3,5mm
2.|pieces
Sh=Fh-X-4mm
2.|pieces
Sh=Fh-X-4mm
2.|pieces
Ap=Sh-34,8mm
1.|piece
** 11674
**Threshold M11674
Tw=Fw-2X-14mm
1.|piece
Kickplate
Pw=GBWop+9mm
2.|pieces
Sash height
Fh
290-00-005-00
M11842
M11642
M11742
M11942
M11982
Glazing bead width
GBWop=Sw-2Y
Glazing bead height
GBHop=Sh-Y-K
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11674
20
Glazing width
10
Sash width
Frame height
GBHop
Fw
Sh
Frame width
M11538
|Sashes
European Groove
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
M11658
M11758
GBWop
Sw
250
X
Sw
: **|Note: **Alternative
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+4Sh+2Pw
|Meters
Inner glazing gasket
2Sw+4Sh+2Pw
|Meters
220-11-002-01
Seal gasket
2Sw+3Sh
|Meters
220-11-001-01
Seal gasket
Fw+2Fh+Ap
|Meters
210-11-500-01
Central seal gasket
Fw+2Fh+Ap
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
According to the kickplate
Kickplate cleat
x4.|pieces
According to the sash
invertion profile
End cap for sash
invertion profile
1 |pair
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
2.|pieces
According to the sash
6.|pieces
According to the kickplate
2.|pieces
Setting block
8.|pieces
According to the glazing width
**310-11-674-01
290-00-005-00
300-11-658-00
|or
300-11-758-03
Ap
202-11-151-01
34,8
Code Nr
M11642
M11742
M11842
M11942
M11982
M11758
M11658
M11674
X
ISO 7050 st 4,8x25
V4/2011
310-11-674-01
: **|Note: **Alternative
Tw
Fw
310-11-674-01
251
|Entrance Doors
A
One sash opening
outward entrance door
M11588
M11788
220-11-002-01
Ph
15
|Profile cuttings
11588|Frame 11588
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-66mm
2.|pieces
11674
Threshold M11674
Tw=Fw-126mm
1.|piece
11670
Sash beauty profile M11670
Aw=Sw-47,6mm
1.|piece
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-2Ph+44mm
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11584
M11966
M11670
250-11-170-01
250-11-270-01
M11674
: . 290
Note: Details about the glazing bead cutting in page 290
Sh
290-00-005-00
15
Glazing bead width
GBHop
Frame height
202-11-151-01
200-11-156-01
Fh
Fw
15
Frame width
Fw
GBWop
Ph
Sw
252
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
Seal gasket
Fw+2Fh+Sw+2Sh
|Meters
202-11-151-01
According to the glazing width
220-11-002-01
250-11-170-01
250-11-270-01
310-11-670-00
310-11-674-10
According to the sash
290-00-005-00
M11674
310-11-674-10
ISO 7050 st 4,8x25
M11670
M11670 beauty
Sw |Meters
profile gasket
M11674
M11670
M11670 beauty
Sw |Meters
profile gasket
M11670
End cover for beauty
profile M11670
M11674
End cap for M11674
threshold
1 |pair
1 |pair
63
Tw
Fw
310-11-674-10
4.|pieces
4.|pieces
310-11-670-00
M11670
310-11-670-00
ISO 7050 st 4,2x25
M11670
23,8
Aw
23,8
Sw
V4/2011
253
|Entrance Doors
A
One sash opening
outward entrance door
A
M11588
M11788
B
220-11-002-01
16
Ph
|Profile cuttings
11588|Frame 11588
Frame width
Fw
1.|piece
Fh
1.|piece
Fh
1.|piece
Sash width
Sw=Fw-102mm
2.|pieces
Sash height
Sh=Fh-66mm
2.|pieces
11774
Threshold M11774
Tw=Fw-139mm
1.|piece
11227
Sash beauty profile M11227
Aw=Sw-44mm
1.|piece
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-2Ph+44mm
Sh
GBHop
Fh
Frame height
202-11-151-01
200-11-156-01
290-00-005-00
M11584
M11966
Gw=GBWop-14mm
M11227
250-11-226-01
Glazing height
Gh=GBHop-14mm
M11774
Glazing width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Ph
Sw
254
51
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh
|Meters
Inner glazing gasket
2Sw+2Sh
|Meters
Seal gasket
Fw+2Fh+Sw+2Sh
|Meters
M11774
202-11-151-01
According to the glazing width
220-11-002-01
250-11-226-01
310-11-774-10
According to the sash
310-11-774-10
M11774
M11227
M11227 beauty
Aw |Meters
profile gasket
M11774
End cap for M11774
threshold
1 |pair
4.|pieces
Setting block
4.|pieces
290-00-005-00
69,5
Tw
310-11-774-10
Fw
M11584
M11966
M11227
22
Aw
Sw
M11227
V4/2011
255
|Entrance Doors
A
B
One sash opening outward
entrance door with one fixed sash
C
17
|Profile cuttings
11514|Frame 11514
Sh=Fh-X-42mm
Tw=Ws-T/2-78mm
1.|piece
Ht=Fh-X+4,5mm
1.|piece
Pw=GBWop+9mm
1.|piece
Aw=Sw-47,6mm
1.|piece
220-11-002-01
202-11-151-01
1.|piece 200-11-156-01
Wr=Ws-X-T/2+9,4mm
Hr=Fh-X+4,7mm
1.|piece
Hr=Fh-X+4,7mm
1.|piece
GBWop=Sw-2Ph+44mm
290-00-005-00
GBHop=Sh-2Ph+44mm
M11842
M11642
M11742
M11942
M11982
M11584
M11966
GBWTop=Wt-X-T/2
GBHTop=Fh-X-K
M11670
|Glazing width
Gw=GBWop-14mm
|Glazing height
Gh=GBHop-14mm
|Glazing width
Gwt=GBWTop-14mm
|Glazing height
Ght=GBHTop-14mm
250-11-170-01
250-11-270-01
M11674
: . 290
Note: Details about the glazing bead cutting in page 290
X
M11662
2.|pieces
2.|pieces
GBHTop
11670
Sash beauty profile M11670
11162|Frame beauty
profile width M11162
11162|Frame beauty
profile height M11162
Glazing bead width
Glazing bead height
Glazing bead width
Glazing bead height
Sw=Ws-X-T/2-54mm
Fh
|Kickplate
1.|piece
|Transom-mullion
Fh
Fh
11674
Threshold M11674
1.|piece
GBHop
Sh
|Sash height
Fh
15
|Sash width
1.|piece
15
|Frame height
Fw
Ph
|Frame width
A
M11514
M11518
M11814
M11818
M11906
M11910
T
M11566
GBWop
GBWTop
Ph
Sw
Ws
256
Fw
Wt
V4/2011
1:2|Sections 1:2
Code Nr
|Accessory cuttings
Description
Accessory
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
Inner glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
220-11-002-01
Seal gasket
Ws+2Fh+Sw+2Sh
|Meters
250-11-170-01
M11670
M11670 beauty
profile gasket
Sw |Meters
250-11-270-01
M11670
M11670 beauty
profile gasket
Sw |Meters
202-11-151-01
According to the glazing width
x2.|pieces
|According
to the transom-mullion
Transom-mullion cleat
x1.|pieces
M11670
End cap for beauty
profile M11670
1 |pair
M11674
End cap for M11674 threshold
1 |pair
According to the sash
Sash setting block
4.|pieces
According to the kickplate
Kickplate setting block
2.|pieces
Setting block
6.|pieces
290-00-005-00
M11674
Kickplate cleat
310-11-674-10
310-11-674-10
ISO 7050 st 4,8x25
According to the kickplate
310-11-670-00
M11674
Tw
310-11-674-10
Ws
310-11-670-00
310-11-670-00
M11670
M11670
23,8
Aw
23,8
Sw
V4/2011
257
|Entrance Doors
A
Two sash opening
outward entrance door
M11588
M11788
220-11-002-01
Ph
18
|Profile cuttings
1.|piece
Fh
1.|piece
Fh
1.|piece
Sw=Fw-102mm
4.|pieces
Sh=Fh-66mm
4.|pieces
Ha=Sh-30,6mm
1.|piece
Tw=Fw-126mm
1.|piece
Aw=Sw-47,6mm
2.|pieces
U=Ha-445mm
1.|piece
Frame height
11872
Sash invertion profile M11872
11674
Threshold M11674
11670
Sash beauty profile M11670
U-24x10x2
Beauty profile U-24x10x2
290-00-005-00
M11584
M11966
GBWop=Sw-2Ph+44mm
M11670
Glazing bead height
GBHop=Sh-2Ph+44mm
250-11-170-01
250-11-270-01
M11674
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
15
Glazing bead width
15
Sash width
Sash height
Fh
Fw
Sh
Frame width
202-11-151-01
200-11-156-01
GBHop
11588|Frame 11588
: . 290
Note: Details about the glazing bead cutting in page 290
GBWop
Fw
M11872 U-24x10x2
5
Sw
258
Ph
Sw
51
V4/2011
1:2|Sections 1:2
ISO 7050 st 4,2x25
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
8.|pieces
According to the sash
Sash alignment corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
Inner glazing gasket
4Sw+4Sh
|Meters
220-11-002-01
Seal gasket
Fw+2Fh+2Sw+2Sh+Ha
|Meters
250-11-170-01
M11670
M11670 beauty
profile gasket
2Sw |Meters
250-11-270-01
M11670
M11670 beauty
profile gasket
2Sw |Meters
According to the glazing width
300-21-872-13
|Right set
300-21-872-03
|Left set
310-11-670-00
310-11-674-10
According to the sash
11872
M11670
End cap for sash invertion
profile M11872
with the use of M11670
M11670
End cap for beauty
profile M11670
310-11-674-10
M11674
63
Tw
Fw
310-11-674-10
310-11-670-00
ISO 7050 st 4,2x25
M11670
310-11-670-00
1 |pair
M11670
23,8
23,8
Aw
Sw
2 |pairs
M11674
End cap for M11674 threshold
1 |pair
Sash setting block
8.|pieces
Setting block
8.|pieces
300-21-872-13
24
290-00-005-00
M11674
24
202-11-151-01
300-21-872-13
Ha
Ha
M11872
U-24x10x2
300-21-872-13
300-21-872-13
M11670
310-11-670-00
M11670
Aw
V4/2011
23,8
ISO 7050 st 4,2x19
259
|Entrance Doors
A
Two sash opening
outward entrance door
A
M11588
M11788
B
220-11-002-01
Ph
19
|Profile cuttings
11588|Frame 11588
Fh
1.|piece
Fh
1.|piece
Sw=Fw-102mm
4.|pieces
Sh=Fh-66mm
4.|pieces
Ha=Sh-48mm
1.|piece
Tw=Fw-139mm
1.|piece
Aw1=Sw-44mm
1.|piece
Aw2=Sw
1.|piece
Sash width
Sash height
11872
Sash invertion profile M11872
11774
Threshold M11774
11227
Sash beauty profile M11227
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-2Ph+44mm
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11584
M11966
M11227
250-11-226-01
M11774
: . 290
Note: Details about the glazing bead cutting in page 290
GBWop
290-00-005-00
Frame height
202-11-151-01
200-11-156-01
Fh
1.|piece
Fw
M11872 U-24x10x2
5
Sw
260
GBHop
Fw
Sh
Frame width
Ph
Sw
51
V4/2011
1:2|Sections 1:2
Quantity
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
8.|pieces
According to the sash
Sash alignment corners
8.|pieces
Outer glazing gasket
4Sw+4Sh
|Meters
Inner glazing gasket
4Sw+4Sh
|Meters
220-11-002-01
Seal gasket
Fw+2Fh+4Sw+4Sh
|Meters
250-11-226-01
M11227
M11227 beauty
profile gasket
Aw1+Aw2
|Meters
11872
End cap for sash invertion
profile M11872
1 |pair
M11774
End cap for M11774
threshold
1 |pair
Sash setting block
8.|pieces
Setting block
8.|pieces
According to the glazing width
300-11-872-10
|Right set
300-11-872-00
|Left set
310-11-774-10
According to the sash
290-00-005-00
M11872
202-11-151-01
300-11-872-10
24
Code Nr
According to the frame
Ha
|Accessory cuttings
Description
Accessory
U-24x10x2
M11227
ISO 7050 st 2,2x13
300-11-872-10
M11774
M11774
69,5
ISO 7050 st 4,8x38
Tw
310-11-774-10
Fw
310-11-774-10
U-24x10x2
Sw
22
V4/2011
Aw1
Aw2
22
261
|Entrance Doors
A
One sash opening
outward entrance
door with kickplate
M11588
M11788
7,8
7,4
220-11-002-01
10
Ph
20
|or
|Profile cuttings
M11584
M11966
11588|Frame 11588
Sash height
** 11674
**Threshold M11674
Kickplate
Fh
1.|piece
Sw=Fw-102mm
1.|piece
Fh
1.|piece
GBHop
Fh
202-11-151-01
200-11-156-01
290-00-005-00
Sh
Sash width
1.|piece
M11842
Sh=Fh-61mm
1.|piece
Sh=Fh-61mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
1.|piece
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-Ph-K+22mm
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
7,8
7,4
M11674
20
Glazing width
M11642
M11742
M11942
M11982
Frame height
Fw
10
Frame width
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Ph
Sw
262
: **|Note: **Alternative
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Code Nr
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
Sw+2Sh+Pw
|Meters
Inner glazing gasket
Sw+2Sh+Pw
|Meters
Seal gasket
Sw+2Sh+Sw+2Sh
|Meters
202-11-151-01
According to the glazing width
220-11-002-01
M11674
310-11-674-10
According to the kickplate
Kickplate cleat
x2.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
2.|pieces
According to the sash
3.|pieces
According to the kickplate
1.|piece
Setting block
4.|pieces
**310-11-674-10
290-00-005-00
M11674
63
V4/2011
Tw
Fw
: **|Note: **Alternative
310-11-674-10
263
|Entrance Doors
A
One sash opening
outward entrance
door with kickplate
M11588
M11788
5,9
7,8
220-11-002-01
10
Ph
21
|or
|Profile cuttings
M11584
M11966
11588|Frame 11588
** 11674
**Threshold M11674
Kickplate
11210
Additional profile M11210
11211
Beauty profile M11211
Glazing bead width
Glazing bead height
Glazing width
Glazing height
1.|piece
Fh
1.|piece
Sw=Fw-102mm
1.|piece
Sh=Fh-61mm
1.|piece
Sh=Fh-61mm
1.|piece
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
1.|piece
Bw=Sw-33mm
2.|pieces
Cw=GBWop
2.|pieces
Fh
GBHop
290-00-005-00
M11842
M11642
M11742
M11942
M11982
M11211
5,9
GBWop=Sw-2Ph+44mm
M11210
GBHop=Sh-Ph-K+22mm
250-11-170-01
7,8
M11674
Gw=GBWop-14mm
20
Sash height
Fh
202-11-151-01
200-11-156-01
Sh
Sash width
1.|piece
Frame height
Fw
10
Frame width
Gh=GBHop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
Fw
GBWop
Ph
Sw
264
: **|Note: **Alternative
51
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
2.|pieces
Frame crimp cleats
According to the frame
2.|pieces
Frame alignment corners
According to the frame
2.|pieces
Sash crimp nail cleats
According to the sash
2.|pieces
Sash alignment corners
According to the sash
Sw+2Sh+Pw
202-11-151-01
Outer glazing gasket
|Meters
Sw+2Sh+Pw
Inner glazing gasket
|Meters
According to the glazing width
Fw+2Fh+Sw+2Sh
220-11-002-01
Seal gasket
|Meters
M11210
M11210 beauty
2Bw |Meters
250-11-170-01
profile gasket
x2.|pieces
Kickplate cleat
According to the kickplate
M11674
End cap for M11674 threshold
**310-11-674-10
M11211
End cap for M11211 profile
Sash setting block
|Kickplate setting block
Setting block
310-11-211-00
According to the sash
According to the kickplate
290-00-005-00
M11674
310-11-674-10
ISO 7050 st 4,8x25
M11674
1 |pair
1 |pair
3.|pieces
63
1.|piece
310-11-674-10
4.|pieces
M11582
M11636
M11734
M11968
M11642
M11742
M11842
M11942
M11982
32
M11584
M11966
32
Tw
Fw
310-11-211-00
16
27,5
16
9,5
Bw
Cw
ISO 7050 st 4,2x25
M11211
M11210
ISO 7049 st 5,5x19
M11211
Sw
V4/2011
M11210
: **|Note: **Alternative
265
|Entrance Doors
A
M11514
M11518
M11814
M11818
M11906
M11910
220-11-002-01
210-11-500-01
One sash opening
outward entrance
door with kickplate
10
220-11-001-01
|or
|Profile cuttings
Ph
22
M11690
|Sashes
European Groove
11514|Frame 11514
Fh
1.|piece
Sw=Fw-2X+12mm
1.|piece
Sh=Fh-X-4mm
1.|piece
Sh=Fh-X-4mm
1.|piece
** 11674
**Threshold M11674
Tw=Fw-2X-14mm
1.|piece
Kickplate
Pw=GBWop+9mm
1.|piece
Sash height
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-Ph-K+22mm
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
290-00-005-00
M11842
M11642
M11742
M11942
M11982
M11674
20
Sash width
Fh
1.|piece
Sh
Fh
Frame height
202-11-151-01
200-11-156-01
10
1.|piece
GBHop
Fw
Frame width
: . 290
Note: Details about the glazing bead cutting in page 290
GBWop
Sw
Fw
266
: **|Note: **Alternative
Ph
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
Sw+2Sh+Pw
|Meters
Inner glazing gasket
Sw+2Sh+Pw
|Meters
202-11-151-01
According to the glazing width
220-11-002-01
Seal gasket
Sw+2Sh
|Meters
220-11-001-01
Seal gasket
Fw+2Fh
|Meters
210-11-500-01
Central seal gasket
Fw+2Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
Kickplate cleat
x2.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
1.|piece
According to the sash
3.|pieces
According to the kickplate
1.|piece
Setting block
4.|pieces
According to the kickplate
**310-11-674-01
290-00-005-00
M11674
310-11-674-01
ISO 7050 st 4,8x25
M11674
V4/2011
Tw
Fw
: **|Note: **Alternative
310-11-674-01
267
|Entrance Doors
A
B
One sash opening outward
entrance door with kickplate
with one fixed sash
Fh
1.|piece
Fh
1.|piece
220-11-002-01
210-11-500-01
220-11-001-01
|Sash width
Sw=Ws-X-T/2-49,8mm
2.|pieces M11690
|Sash height
Sh=Fh-X-4mm
2.|pieces European
Ht=Fh-X+4,5mm
1.|piece
|Kickplate
Pw=GBWTop+9mm
1.|piece
|Kickplate
Pw=GBWop+9mm
1.|piece
2.|pieces 290-00-005-00
Aw=GBWTop
FAw=Ws-X-T/2
1.|piece
|Frame
beauty profile height M11694
FAh=Fh-X
1.|piece
FAh=Fh-X
1.|piece
Glazing bead width
Glazing bead height
Glazing bead width
Glazing bead height
|Glazing width
|Glazing height
|Glazing width
|Glazing height
GBWop=Sw-2Ph+44mm
M11842
M11642
M11742
M11942
M11982
GBHop=Sh-Ph-K+22mm
GBWTop=Wt-X-T/2
GBHTop=Fh-X-K
M11674
20
Gw=GBWop-14mm
Gh=GBHop-14mm
Gwt=GBWTop-14mm
Ght=GBHTop-14mm
: . 290
Note: Details about the glazing bead cutting in page 290
GBWop
Sw
Ws
268
|Kickplate
beauty profile M11140
|Frame
beauty profile width M11694
202-11-151-01
200-11-156-01
Fh
|Transom-mullion
Groove
Sh
1.|piece
GBHop
Tw=Ws--T/2-76mm
Ph
|Sashes
** 11674
**Threshold M11674
M11694
GBHTop
1.|piece
|Frame height
Fw
10
|Frame width
Fh
|Profile cuttings
11514|Frame 11514
23
M11514
M11518
M11814
M11818
M11906
M11910
Ph
Fw
: **|Note: **Alternative
GBWTop
C
X
|Transoms
European Groove
Wt
V4/2011
1:2|Sections 1:2
|Accessory cuttings
Description
Accessory
Quantity
Code Nr
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
2.|pieces
According to the sash
Sash alignment corners
2.|pieces
Outer glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
Inner glazing gasket
2Sw+2Sh+2Fh+2Wt
|Meters
220-11-002-01
Seal gasket
Sw+2Sh
|Meters
220-11-001-01
Seal gasket
Ws+2Fh
|Meters
210-11-500-01
Central seal gasket
Ws+2Fh
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
|According
to the transom-mullion
Transom-mullion cleat
x1.|piece
According to the kickplate
Kickplate cleat
x4.|pieces
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
1.|piece
According to the sash
4.|pieces
According to the kickplate
2.|pieces
Setting block
6.|pieces
202-11-151-01
According to the glazing width
**310-11-674-01
290-00-005-00
M11674
310-11-674-01
ISO 7050 st 4,8x25
T
M11674
Tw
310-11-674-01
Ws
V4/2011
: **|Note: **Alternative
269
|Entrance Doors
A
A
M11588
M11788
7,8
7,4
220-11-002-01
10
B
24
Ph
|Two sash opening
outward entrance door with kickplate
|or
|Profile cuttings
202-11-151-01
200-11-156-01
1.|piece
Fh
1.|piece
Sw=Fw-102mm
2.|pieces
Sh=Fh-61mm
2.|pieces
Sh=Fh-61mm
2.|pieces
11872
Sash invertion profile M11872
Ha=Sh-31mm
1.|piece
** 11674
**Threshold M11674
Kickplate
Tw=Fw-126mm
1.|piece
Pw=GBWop+9mm
2.|pieces
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-Ph-K+22mm
Glazing width
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11842
M11642
M11742
M11942
M11982
7,8
7,4
M11674
20
Sash height
290-00-005-00
10
Sash width
Fh
Fh
Frame height
Sh
1.|piece
Fw
GBHop
11586|Frame 11588
Frame width
M11584
M11966
: . 290
Note: Details about the glazing bead cutting in page 290
GBWop
Fw
M11872 U-24x10x2
5
Sw
270
Ph
Sw
: **|Note: **Alternative
51
V4/2011
1:2|Sections 1:2
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
Sw+4Sh+2Pw
|Meters
Inner glazing gasket
Sw+4Sh+2Pw
|Meters
Seal gasket
Fw+2Fh+2Sw+2Sh+Ha
|Meters
Kickplate cleat
x4.|pieces
202-11-151-01
According to the glazing width
220-11-002-01
According to the kickplate
300-11-872-10
1 |pair
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
4.|pieces
According to the sash
6.|pieces
According to the kickplate
2.|pieces
Setting block
8.|pieces
300-11-872-00
|Left set
**310-11-674-10
290-00-005-00
M11872
M11642
M11742
M11842
M11942
M11982
U-24x10x2
11872
End cap for sash invertion
profile M11872
|Right set
300-11-872-10
24
|Accessory cuttings
Description
Accessory
Ha
Code Nr
300-11-872-10
M11674
M11674
63
310-11-674-10
Tw
Fw
310-11-674-10
: **|Note: **Alternative
271
|Entrance Doors
A
M11514
M11518
M11814
M11818
M11906
M11910
220-11-002-01
210-11-500-01
10
220-11-001-01
|or
11514|Frame 11514
M11690
|Sashes
European Groove
202-11-151-01
200-11-156-01
1.|piece
Fh
1.|piece
Fh
1.|piece
Sw=Fw/2+3,5mm
2.|pieces
Sh=Fh-X-4mm
2.|pieces
Sh=Fh-X-4mm
2.|pieces
Ap=Sh-34,8mm
1.|piece
M11842
** 11674
**Threshold M11674
Tw=Fw-2X-14mm
1.|piece
M11642
M11742
M11942
M11982
Kickplate
Pw=GBWop+9mm
2.|pieces
Sash height
Fh
Glazing bead width
GBWop=Sw-2Ph+44mm
Glazing bead height
GBHop=Sh-Ph-K+22mm
Gw=GBWop-14mm
Glazing height
Gh=GBHop-14mm
M11674
20
Glazing width
290-00-005-00
Sh
Sash width
10
Frame height
GBHop
Fw
Frame width
Ph
25
|Two sash opening
outward entrance door with kickplate
|Profile cuttings
: . 290
Note: Details about the glazing bead cutting in page 290
M11658
GBWop
GBWop
M11758
Ph
Sw
Fw
272
: **|Note: **Alternative
X
V4/2011
1:2|Sections 1:2
Quantity
According to the frame
Frame crimp cleats
2.|pieces
According to the frame
Frame alignment corners
2.|pieces
According to the sash
Sash crimp nail cleats
4.|pieces
According to the sash
Sash alignment corners
4.|pieces
Outer glazing gasket
2Sw+4Sh+2Pw
|Meters
Inner glazing gasket
2Sw+4Sh+2Pw
|Meters
220-11-002-01
Seal gasket
2Sw+3Sh
|Meters
220-11-001-01
Seal gasket
Fw+2Fh+Ap
|Meters
210-11-500-01
Central seal gasket
Fw+2Fh+Ap
|Meters
255-11-500-01
Vulcanized corner for
central seal gasket
2.|pieces
According to the kickplate
Kickplate cleat
x4.|pieces
According to the sash
invertion profile
End cap for sash
invertion profile
1 |pair
M11674
End cap for M11674
threshold
1 |pair
According to the sash width
Windshield
2.|pieces
According to the sash
Sash setting block
6.|pieces
According to the kickplate
|Kickplate setting block
2.|pieces
Setting block
8.|pieces
According to the glazing width
**310-11-674-01
290-00-005-00
300-11-658-00
|or
300-11-758-03
34,8
202-11-151-01
Ap
Code Nr
|Accessory cuttings
Description
Accessory
M11642
M11742
M11842
M11942
M11982
M11758
M11658
M11674
X
ISO 7050 st 4,8x25
V4/2011
310-11-674-01
: **|Note: **Alternative
Tw
Fw
310-11-674-01
273
|Entrance Doors
274
V4/2011
|Entrance Doors
|Milling-Tooling Operations
V4/2011
275
150
|Entrance Doors
Dr Hahn|Dr Hahn hinge
Sash dimensions
Weight
2 |2 hinges
1250x2000mm
160 kg
3 |3 hinges
1250x2000mm
180 kg
200
20
360-58-901-XX
150
65
5
|Code
|Drilling jig
|White RAL9010
360-58-901-02
|Color
34
360-58-901-12
360-95-652-00
34
21
/ European Groove
European Groove Frames / Transoms-mullions
M11164
M11582
M11968
M11636
M11882
M11734
M11634
5
20,5
44,5
M11586
M11786
M11588
M11788
5
M11582
M11968
M11636
M11882
M11734
M11634
276
20,5
44,5
M11584
M11884
M11966
M11880
M11638
V4/2011
Weight
2 |2 hinges
1250x2000mm
160 kg
3 |3 hinges
1250x2000mm
180 kg
7,5
360-15-900-XX
20
360-75-900-XX
15
Sash dimensions
360-58-901-XX
150
65
150
|Milling-Tooling Operations
7,5mm|7,5mm Addition
|Code |Code
|Drilling jig
|Color
White RAL9010
360-58-901-11 360-75-900-11
Silver anodized EV1
360-58-901-12 360-75-900-12
Black anodized EV6
200
34
360-16-101-00
21
1
1
360-58-901-02 360-75-900-02
15mm|15mm Addition
34
|Code |Code
|Drilling jig
|Color
360-58-901-02 360-15-900-02
White RAL9010
360-58-901-11 360-15-900-11
Silver anodized EV1
360-58-901-12 360-15-900-12
Black anodized EV6
20,5
44,5
4,8
/ European Groove
European Groove Frames / Transoms-mullions
360-95-912-00
/ European Groove
European Groove Frames / Transoms-mullions
M11538
M11548
M11938
7,5
15
M11828
20,5
44,5
/ European Groove
European Groove Frames / Transoms-mullions
V4/2011
M11690
M11893
15
7,5
/ European Groove
European Groove Frames / Transoms-mullions
M11890
277
150
|Entrance Doors
Dr Hahn|Dr Hahn hinge
Sash dimensions
Weight
2 |2 hinges
1250x2000mm
160 kg
3 |3 hinges
1250x2000mm
180 kg
34
21
34
200
20
150
86
360-58-911-XX
5
41,5
44,5
/ European Groove
European Groove Frames / Transoms-mullions
M11662
|Code
M11584
M11884
M11966
M11880
M11638
41,5
278
360-58-911-02
|Color
|White RAL9010
|Drilling jig
360-00-111-00
44,5
V4/2011
150
|Milling-Tooling Operations
Sash dimensions
Weight
2 |2 hinges
1250x2000mm
160 kg
3 |3 hinges
1250x2000mm
180 kg
360-15-900-XX
200
360-75-900-XX
15
7,5
20
150
86
360-58-911-XX
7,5mm|7,5mm Addition
|Code |Code
|Color
|Drilling jig
White RAL9010
360-58-911-11 360-75-900-11
Silver anodized EV1
360-58-911-12 360-75-900-12
Black anodized EV6
360-16-111-00
21
34
360-58-911-02 360-75-900-02
34
15mm|15mm Addition
|Code |Code
|Color
360-58-911-02 360-15-900-02
White RAL9010
360-58-911-11 360-15-900-11
Silver anodized EV1
360-58-911-12 360-15-900-12
Black anodized EV6
41,5
/ European Groove
European Groove Frames / Transoms-mullions
M11694
M11690
M11893
15
M11694
7,5
V4/2011
360-16-111-00
44,5
5
/ European Groove
European Groove Frames / Transoms-mullions
41,5
|Drilling jig
M11890
44,5
279
|Entrance Doors
2 |Second sash lock
474-37-330-00
ISO7050 st4,2x25
474-03-715-00
U-24x10x2
474-03-715-00
474-03-738-00
280
V4/2011
|Milling-Tooling Operations
|Locks
24x6
24x6
24x3
24x3
Single point lock with latch bolt
Striking plate 24x6 din left Striking plate 24x6 din right Striking plate 24x3 din left Striking plate 24x3 din right
24
3
92
E
E=30
E=35
Din left
Din right
Din left
Din right
Profile code
440-14-030-16
440-14-035-16
415-13-000-00
415-13-001-00
485-95-060-11
485-95-061-11
M11538
M11548
M11582
M11584
M11634
M11636
M11638
M11690
M11734
M11828
M11880
M11882
M11884
M11890
M11893
M11938
M11966
M11968
V4/2011
X
X
X
X
X
281
|Entrance Doors
|Locks
5 - Point lock with latch bolt
3 - Point lock with latch bolt
1050
1050
92
92
2285
2285
GU SECURY AUTOMATIC
E= 35
GU SECURY
AUTOMATIC 4
GU SECURY MR4
E= 40
E= 35
E= 35
GU SECURY MR2
E= 35
E= 40
A= 24, B= 6
A= 20, B= 3
A= 24, B= 6
A= 24, B= 6
A= 20, B= 3
A= 24, B= 6
A= 24, B= 6
A= 24, B= 6
440-04-031-00
450-29-038-16
450-29-043-16
450-54-117-16
450-54-113-16
450-52-817-16
450-11-327-16
450-76-018-16
Profile
code
M11538
M11548
M11582
M11584
M11634
M11636
M11638
M11690
M11734
X
X
M11828
282
X
X
X
X
M11880
M11882
M11884
M11890
M11893
M11938
M11966
M11968
X
V4/2011
|Milling-Tooling Operations
24x3 24x3
Middle striking plate
Middle striking plate
24x3 din right
24x3 din left
Profile
code
485-95-060-11
485-95-061-11
Din left
Din right
24x3
24x3
Middle striking plate
24x3 din left
24x3
Middle striking plate
24x3 din right
24x3
Striking plate 24x3
415-51-001-00
485-95-160-16
485-95-161-16
415-51-002-16
Din left
Din right
M11538
M11548
M11582
M11584
M11634
M11636
M11638
M11880
M11882
M11884
M11966
M11968
M11690
M11734
M11828
M11890
M11893
M11938
V4/2011
283
|Entrance Doors
|Cylinder
|High security
Profile code
GU Series50
CISA Asix
GU Series45 Janus
M11538
460-01-115-00
460-30-002-08
30
80
M11548
460-01-115-00
460-30-002-08
30
80
M11582
460-32-001-08 460-01-114-00
460-30-001-08
35
65
M11584
460-32-001-08 460-01-114-00
460-30-001-08
35
65
460-30-003-08
35
80
460-30-001-08
35
65
460-30-003-08
35
80
460-30-002-08
30
80
M11734
460-30-004-08
35
75
M11828
460-30-003-08
35
80
M11634
M11636
460-32-001-08 460-01-114-00
M11638
M11690
460-01-115-00
M11880
460-32-001-08 460-01-114-00
460-30-001-08
35
65
M11882
460-32-001-08 460-01-114-00
460-30-001-08
35
65
M11884
460-32-001-08 460-01-114-00
460-30-001-08
35
65
460-30-003-08
35
80
M11890
M11893
460-01-115-00
460-30-002-08
30
80
M11938
460-01-115-00
460-30-002-08
30
80
M11966
460-32-001-08 460-01-114-00
460-30-001-08
35
65
M11968
460-32-001-08 460-01-114-00
460-30-001-08
35
65
|Rosette
284
460-52-101-02
|Rosette white
460-52-102-03
460-52-104-20
460-52-105-11
V4/2011
Glazings
V4/2011
285
mm
Outer gasket
61
200-11-157-01 202-11-151-01
59-60
200-11-156-01 202-11-151-01
58
200-11-157-01 202-11-151-01
55-57
200-11-156-01 202-11-151-01
54
200-11-157-01 202-11-151-01
51-53
200-11-156-01 202-11-151-01
50
200-11-157-01 202-11-151-01
47-49
200-11-156-01 202-11-151-01
Glazing bead
Glazing bead
Glazing bead
M9313
2,5
|For frames
M11508, M11510, M11514
M11516, M11518, M11520
M11526, M11528, M11580
M11649, M11668, M11694
M11705, M11762, M11814
M11818, M11832, M11906
M11908, M11910, M11978
M11988
M946
5,5
M9565
9,5
M9312
M9112
M11437
13,5
13,5
13,5
170-60-112-XX
45-46
200-11-157-01 202-11-151-01
42-44
200-11-156-01 202-11-151-01
M11451
220-11-449-12
M11461
200-11-157-01 202-11-151-01
38-40
200-11-156-01 202-11-151-01
M11452
M11462
22,5
22,5
170-60-562-XX
37
200-11-157-01 202-11-151-01
34-36
200-11-156-01 202-11-151-01
M11453
26
M11463
26,5
170-60-563-XX
33
200-11-157-01 202-11-151-01
30-32
200-11-156-01 202-11-151-01
M11454
30,5
M11464
30,5
170-60-564-XX
29
26-28
200-11-157-01 202-11-151-01
M15110
34,5
M11961
18,5
18,5
170-60-561-XX
41
72,5
Glazing bead
M11465
34,5
M11449
18,5
18,5
311-09-412-00
M11962
22,5
311-09-412-00
M11963
26,5
311-09-412-00
M11493
30,5
311-09-412-00
M11965
34,5
220-11-449-12
M11439
22,5
220-11-449-12
M11435
26,5
220-11-449-12
|For sashes
M11530, M11534, M11538
M11540, M11544, M11548
M11550, M11630, M11634
M11636, M11638, M11690
M11716, M11717, M11734
M11744, M11820, M11824
M11828, M11873, M11877
M11878, M11880, M11882
M11884, M11890, M11898
M11966, M11968
|For transoms
M11562, M11564, M11566
M11568, M11570, M11578
M11688, M11722, M11726
M11732, M11766, M11778
M11770, M11862, M11866
M11874, M11886, M1188
|For Kickplates
M11642, M11742, M11842
M11942, M11982
202-11-151-01
M11431
30,5
220-11-449-12
M11433
34,5
200-11-156-01
200-11-156-01 202-11-151-01
170-60-565-XX
25
200-11-157-01 202-11-151-01
22-24
200-11-156-01 202-11-151-01
M11460
38,5
M11445
38,5
170-60-566-XX
21
200-11-157-01 202-11-151-01
18-20
200-11-156-01 202-11-151-01
M11483
M11485
42,5
42,5
311-09-412-00
M11945
38,5
311-09-412-00
220-11-449-12
M11440
38,5
220-11-449-12
200-11-157-01
286
V4/2011
|Glazings
mm
Outer gasket
68
200-11-157-01 202-11-151-01
66-67
200-11-156-01 202-11-151-01
65
200-11-157-01 202-11-151-01
62-64
200-11-156-01 202-11-151-01
Glazing bead
Glazing bead
Glazing bead
80
Glazing bead
M9313
2,5
|For sashes
M11730, M11893, M11934
M11938
M946
5,5
|For transom
M11590
61
200-11-157-01 202-11-151-01
58-60
200-11-156-01 202-11-151-01
57
200-11-157-01 202-11-151-01
54-56
200-11-156-01 202-11-151-01
M9565
|For Kickplate
M11992
9,5
M9312
M9112
M11437
13,5
13,5
13,5
170-60-112-XX
52-53
200-11-157-01 202-11-151-01
49-51
200-11-156-01 202-11-151-01
M11451
220-11-449-12
M11461
18,5
18,5
170-60-561-XX
48
200-11-157-01 202-11-151-01
45-47
200-11-156-01 202-11-151-01
M11452
M11462
22,5
22,5
170-60-562-XX
44
200-11-157-01 202-11-151-01
41-43
200-11-156-01 202-11-151-01
M11453
26
M11463
26,5
170-60-563-XX
40
200-11-157-01 202-11-151-01
37-39
200-11-156-01 202-11-151-01
M11454
30,5
M11464
30,5
170-60-564-XX
36
33-35
200-11-157-01 202-11-151-01
M15110
34,5
M11961
M11465
34,5
M11449
18,5
18,5
311-09-412-00
M11962
22,5
311-09-412-00
M11963
26,5
311-09-412-00
M11493
30,5
311-09-412-00
M11965
34,5
220-11-449-12
M11439
22,5
220-11-449-12
M11435
26,5
220-11-449-12
202-11-151-01
M11431
30,5
220-11-449-12
M11433
34,5
200-11-156-01
200-11-156-01 202-11-151-01
170-60-565-XX
32
200-11-157-01 202-11-151-01
29-31
200-11-156-01 202-11-151-01
M11460
38,5
M11445
38,5
170-60-566-XX
28
200-11-157-01 202-11-151-01
25-27
200-11-156-01 202-11-151-01
M11483
M11485
42,5
42,5
311-09-412-00
M11945
38,5
311-09-412-00
220-11-449-12
M11440
38,5
220-11-449-12
200-11-157-01
V4/2011
287
mm
Outer gasket
70
200-11-157-01 202-11-151-01
68-69
200-11-156-01 202-11-151-01
67
200-11-157-01 202-11-151-01
64-66
200-11-156-01 202-11-151-01
63
200-11-157-01 202-11-151-01
60-62
200-11-156-01 202-11-151-01
59
200-11-157-01 202-11-151-01
56-58
200-11-156-01 202-11-151-01
Glazing bead
Glazing bead
Glazing bead
M9313
2,5
|For sashes
M11876, M11972, M11976
M946
5,5
M9565
9,5
M9312
M9112
M11437
13,5
13,5
13,5
170-60-112-XX
54-55
200-11-157-01 202-11-151-01
51-53
200-11-156-01 202-11-151-01
M11451
220-11-449-12
M11461
200-11-157-01 202-11-151-01
47-49
200-11-156-01 202-11-151-01
M11452
M11462
22,5
22,5
170-60-562-XX
46
200-11-157-01 202-11-151-01
43-45
200-11-156-01 202-11-151-01
M11453
26
M11463
26,5
170-60-563-XX
42
200-11-157-01 202-11-151-01
39-41
200-11-156-01 202-11-151-01
M11454
30,5
M11464
30,5
170-60-564-XX
38
35-37
200-11-157-01 202-11-151-01
M15110
34,5
M11961
18,5
18,5
170-60-561-XX
50
81,5
Glazing bead
M11465
34,5
M11449
18,5
18,5
311-09-412-00
M11962
22,5
311-09-412-00
M11963
26,5
311-09-412-00
M11493
30,5
311-09-412-00
M11965
34,5
220-11-449-12
M11439
22,5
220-11-449-12
M11435
26,5
220-11-449-12
202-11-151-01
M11431
30,5
220-11-449-12
M11433
34,5
200-11-156-01
200-11-156-01 202-11-151-01
170-60-565-XX
34
200-11-157-01 202-11-151-01
31-33
200-11-156-01 202-11-151-01
M11460
38,5
M11445
38,5
170-60-566-XX
30
200-11-157-01 202-11-151-01
27-29
200-11-156-01 202-11-151-01
M11483
M11485
42,5
42,5
311-09-412-00
M11945
38,5
311-09-412-00
220-11-449-12
M11440
38,5
220-11-449-12
200-11-157-01
288
V4/2011
|Glazings
mm
Outer gasket
54
200-11-157-01 202-11-151-01
52-53
200-11-156-01 202-11-151-01
51
200-11-157-01 202-11-151-01
48-50
200-11-156-01 202-11-151-01
47
200-11-157-01 202-11-151-01
44-46
200-11-156-01 202-11-151-01
43
200-11-157-01 202-11-151-01
40-42
200-11-156-01 202-11-151-01
Glazing bead
Glazing bead
Glazing bead
M9313
2,5
M946
5,5
|For sash
M11551, M11552, M11573
M9565
9,5
M9312
M9112
M11437
13,5
13,5
13,5
170-60-112-XX
38-39
200-11-157-01 202-11-151-01
35-37
200-11-156-01 202-11-151-01
M11451
220-11-449-12
M11461
200-11-157-01 202-11-151-01
31-33
200-11-156-01 202-11-151-01
M11452
M11462
22,5
22,5
170-60-562-XX
30
200-11-157-01 202-11-151-01
27-29
200-11-156-01 202-11-151-01
M11453
26
M11463
26,5
170-60-563-XX
26
200-11-157-01 202-11-151-01
23-25
200-11-156-01 202-11-151-01
M11454
30,5
M11464
30,5
170-60-564-XX
22
19-21
200-11-157-01 202-11-151-01
M15110
34,5
M11961
18,5
18,5
170-60-561-XX
34
65,1
Glazing bead
M11465
34,5
M11449
18,5
18,5
311-09-412-00
M11962
22,5
311-09-412-00
M11963
26,5
311-09-412-00
M11493
30,5
311-09-412-00
M11965
34,5
220-11-449-12
M11439
22,5
220-11-449-12
M11435
26,5
220-11-449-12
202-11-151-01
M11431
30,5
220-11-449-12
M11433
34,5
200-11-156-01
200-11-156-01 202-11-151-01
170-60-565-XX
18
200-11-157-01 202-11-151-01
15-17
200-11-156-01 202-11-151-01
M11460
38,5
M11445
38,5
170-60-566-XX
14
200-11-157-01 202-11-151-01
11-13
200-11-156-01 202-11-151-01
M11483
M11485
42,5
42,5
311-09-412-00
M11945
38,5
311-09-412-00
220-11-449-12
M11440
38,5
220-11-449-12
200-11-157-01
V4/2011
289
At height
Round glazing beads
At width
+
311-09-412-00
GBw=GBWop - 44mm
GBw=GBWop
GBw=GBWop - 45mm
GBw=GBWop + 9,4mm
Glazing bead height
GBh=GBHop
GBh=GBHop - 44mm
GBh=GBHop - 45mm
GBh=GBHop + 9,4mm
GBHop
Glazing bead width
GBWop
290
V4/2011
General Milling-Tooling Operations
V4/2011
291
59
II
33
II
10,5
16
14
56
470-11-839-00
292
V4/2011
58
10,85
39
160-11-8XX-XX
470-11-835-00
160-11-2XX-XX
160-11-8XX-XX
160-11-2XX-XX
470-11-835-00
V4/2011
293
39
165-20-XXX-XX
165-11-002-00
165-20-XXX-XX
165-11-001-00
294
V4/2011
|Milling tool
|Treated profiles
|Coactive profiles
M11562
M11564
M11566
M11568
M11570
uropean Groove
uropean Groove frames
M11642
M11726
M11742
M11762
M11766
M11770
M11842
M11886
M11888
M11906
M11910
M11942
M11982
76,5
72
4,5
22
4,5
4
13
70
114
/ 72,5mm
Transom-mullion / Kickplates 72,5mm
V4/2011
77,1
295
|Milling machine
852-11-862-00
|Milling tool
|Treated profiles
|Coactive profiles
M11862
M11866
91,4
M11520 M11528
4,5
22
20O
4,55
72
13
114
70
M11862 M11866
M11820 M11828
M11824 M11890
92
296
V4/2011
|Milling tool
|Treated profiles
|Coactive profiles
M11578
M11688
M11578
M11688
142
R8,
69
R1
9,6
4,5
22
,69
R0
,2
R31
4,5
13
72
M11668
142
70
114
M11688
M11578
V4/2011
297
|Milling machine
852-11-578-00
|Milling tool
|Treated profiles
|Coactive profiles
M11578 M11732
M11688 M11874
M11722
M11580
4,5
22
141,5
13
70
114
72
142
298
V4/2011
|Milling tool
|Treated profiles
M11688
M11722
M11874
126,5
4,5
22
15
|Coactive profiles
72
13
70
114
M11988
M11732
M11874
127
V4/2011
299
|Milling machine
852-11-590-00
|Milling tool
|Treated profiles
|Coactive profiles
M11590
M11992
4,5
4,5
22
84
M11730
M11934
M11938
13
70
114
79,5
M11590
M11992
84,5
300
V4/2011
|Milling tool
|Treated profiles
M11916
M11920
|Coactive profiles
4,5
44
76,5
4,5
72
13
70
136
M11908
M11978
M11916
M11920
77,1
V4/2011
301
302
V4/2011
-
Accessories - Gaskets
V4/2011
303
113-11-121-00
113-11-154-00
|Aluminium
113-11-283-00
|Piece
113-13-101-00
113-13-117-00
113-13-121-00
113-13-156-00
113-13-196-00
113-13-248-00
113-13-274-00
113-13-345-00
|Aluminium
Crimp nail cleat
113-19-267-00
|Aluminium
|Piece
Crimp nail cleat
113-23-121-00
113-23-156-00
113-23-196-00
113-23-213-00
113-23-251-00
113-23-270-00
113-23-345-00
|Aluminium
Crimp nail cleat
113-38-121-00
|Aluminium
|Piece
Crimp nail cleat
113-57-093-00
113-57-224-00
|Aluminium
113-57-270-00
113-57-290-00
|Piece
Crimp nail cleat
304
|Piece
|Piece
Crimp nail cleat
113-43-056-00
113-43-121-00
113-43-128-00
113-43-171-00
113-43-194-00
113-43-196-00
113-43-205-00
113-43-220-00
113-43-251-00
113-43-270-00
113-43-295-00
113-43-326-00
113-43-410-00
113-15-102-00
113-15-121-00
113-15-156-00
|Aluminium
|Piece
Crimp nail cleat
113-33-056-00
113-33-074-00
113-33-121-00
113-33-156-00
|Aluminium
113-33-196-00
113-33-205-00
113-33-274-00
113-33-282-00
|Piece
Crimp nail cleat
|Piece
|Aluminium
113-61-121-00
|Aluminium
113-15-270-00
113-15-283-00
|Piece
Crimp nail cleat
113-75-121-00
113-75-196-00
|Aluminium
|Piece
Crimp nail cleat
V4/2011
- |Accessories - Gaskets
110-05-076-00
110-05-156-00
|Aluminium
|Piece
|Crimp cleat
125-13-196-00
125-13-274-00
|Aluminium
125-13-346-00
|Piece
|Spring cleat
125-43-194-00
125-43-220-00
125-43-251-00
125-43-270-00
|Aluminium
125-43-295-00
125-43-326-00
125-43-410-00
|Piece
|Nail cleat
125-23-196-00
125-23-251-00
|Aluminium
125-23-270-00
125-23-345-00
|Piece
|Piece
()
Outer cast transom-mullion cleat (left)
112-23-196-00
|Aluminium
|Piece
Crimp cleat pre-tapped
125-33-196-00
125-33-205-00
|Aluminium
125-33-270-00
|Piece
|Spring cleat
|Spring cleat
140-00-219-00
165-11-001-00
|Aluminium
165-11-002-00
V4/2011
|Aluminium
|Piece
|Piece
|Spring cleat
Cast aluminium
130-05-156-00
Cast spring cleat
160-11-213-91
160-11-223-91
160-11-233-91
160-11-238-91
|Aluminium
160-11-261-91
160-11-270-91
160-11-275-91
|Piece
Inner transom-mullion cleat
Cast aluminium
|Piece
()
Outer cast transom-mullion cleat (right)
160-11-813-91
160-11-823-91
160-11-833-91
160-11-838-91
|Aluminium
160-11-861-91
160-11-870-91
160-11-875-91
|Piece
Outer transom-mullion cleat
305
165-20-130-00
165-20-230-00
Cast aluminium
165-20-330-00
|Piece
180-11-408-00 |Black
|Polyamide
|Piece
180-11-801-00 |Black
|Polyamide
|Piece
Inner cast transom-mullion cleat
|Alignment corner
|Alignment corner
180-19-000-00
180-20-006-00 |Black
180-20-010-03 |Black
|Steel
|Piece
|Polyamide
|Piece
|Polyamide
|Piece
|Alignment corner
|Alignment corner
|Alignment corner
180-20-025-00 |Black
180-25-005-00 |Black
180-25-008-00 |Black
|Polyamide
|Piece
|Polyamide
|Piece
|Polyamide
|Piece
|Alignment corner
|Alignment corner
|Alignment corner
180-25-010-00 |Black
180-25-016-00 |Black
180-25-017-00 |Black
|Polyamide
|Piece
|Alignment corner
306
|Polyamide
|Piece
|Alignment corner
|Polyamide
|Piece
|Alignment corner
V4/2011
- |Accessories - Gaskets
180-25-025-00 |Black
|Polyamide
|Piece
180-25-027-00 |Black
|Polyamide
|Piece
180-25-150-00 |Black
|Polyamide
|Piece
|Alignment corner
|Alignment corner
|Alignment corner
180-25-260-00 |Black
300-11-904-00 |Black
|Polyamide
|Piece
|Polyamide
|Pair
|Polyamide
|Pair
|Alignment corner
11904
End cap for 11904 sash invertion profile
11656
End cap for M11656 sash invertion profile
300-11-658-00 |Black
|Polyamide
|Pair
|Polyamide
|Pair
Polyamide Black
|Pair
11656
End cap for M11656 sash invertion profile
11658
End cap for M11658 sash invertion profile
11698
End cap for M11698 sash invertion profile
300-11-758-00 |Black
Polyamide Black
|Pair
11698
End cap for M11698 sash invertion profile
V4/2011
|Polyamide
|Pair
11758
End cap for M11758 sash invertion profile
Polyamide Black
|Pair
11872
End cap for M11872 sash invertion profile
307
|Pair
310-09-317-02 |White
310-09-317-03 |Black
310-09-317-24 |Grey
310-09-317-34 |Beige
|Polyamide
310-09-970-03 |Black
|Polyamide
|Piece
|Piece
11872
End cap for M11872 sash invertion profile
M9317
End cap for M9317 waterproofing profile
Spacer for venetian blint placement
310-11-116-02 |White
310-11-116-03 |Black
310-11-116-24 |Grey
310-11-211-00 |Black
310-11-228-03 |Black
|Polyamide
|Piece
|Polyamide
|Pair
|Polyamide
|Pair
M11116
End cap for M11116 waterproofing profile
M11211
End cap for M11211 beauty profile
M11228
End cap for M11228 beauty profile
310-11-524-00 |Black
310-11-670-00 |Black
310-11-734-03 |Black
|Polyamide
|Pair
|Pair
|Polyamide
|Pair
11582
M11274|End cover for sash
M11582 with the use of M11274
M11670
End cap for M11670 beauty profile
M11724
End cap for M11724 beauty profile
310-11-774-00 |Black
310-11-674-00 |Black
310-11-674-10 |Black
|Polyamide
|Pair
M11774
|M11774 threshold
end cap for opening inward entrance doors
308
|Polyamide
|Polyamide
|Pair
M11674
|M11674 threshold
end cap for opening inward entrance doors
|Polyamide
|Pair
M11674
|M11674 threshold
end cap for opening outward entrance doors
V4/2011
- |Accessories - Gaskets
310-11-684-03 |Black
|Pair
|Polyamide
310-11-774-10 |Black
|Pair
|Polyamide
Polyamide Black
M11684
End cap for M11684 threshold
M11774
|M11774 threshold
end cap for opening outward entrance doors
11656
M11670|End cap for sash invertion profile
M11656 with the use of M11670
|Pair
Polyamide Black
|Pair
Polyamide Black
|Pair
Polyamide Black
11656
M11670|End cap for sash invertion profile
M11656 with the use of M11670
11872
M11670|End cap for sash invertion profile
M11872 with the use of M11670
11872
M11670|End cap for sash invertion profile
M11872 with the use of M11670
310-21-226-03 |Black
290-11-408-00
290-11-501-00
|Pair
|Polyamide
|Polyamide
|Piece
|Polyamide
|Piece
M11226
End cap for M11226 waterproofing profile
|Setting block
|Setting block
290-11-502-00
290-11-503-00
170-60-112-XX
|Polyamide
|Piece
|Setting block
V4/2011
|Polyamide
|Piece
|Setting block
Cast aluminium
|Piece
M9112
Cast corner for M9112 glazing bead
309
170-60-561-XX
Cast aluminium
|Piece
170-60-562-XX
Cast aluminium
Cast aluminium
|Piece
M11461
Cast corner for M11461 glazing bead
M11462
Cast corner for M11462 glazing bead
M11463
Cast corner for M11463 glazing bead
170-60-564-XX
170-60-565-XX
170-60-566-XX
Cast aluminium
|Piece
M11464
Cast corner for M11464 glazing bead
311-09-412-00 |Black
|Polyamide
|Piece
Cast aluminium
|Piece
M11465
Cast corner for M11465 glazing bead
Cast aluminium
|Piece
M11445
Cast corner for M11445 glazing bead
720-10-964-00
|Piece
|Piece
Glazing bead stabilizer
|Setting block
|Setting block
220-11-002-01 |Black
220-15-001-01 |Black
220-11-001-01 |Black
EPDM|EPDM
|Meters
|Seal gasket
310
|Piece
170-60-563-XX
EPDM|EPDM
|Meters
|Seal gasket
EPDM|EPDM
|Meters
|Seal gasket
V4/2011
- |Accessories - Gaskets
210-11-500-01 |Black
EPDM|EPDM
|Meters
255-11-500-01 |Black
EPDM|EPDM
|Piece
210-11-908-01 |Black
EPDM|EPDM
|Meters
210-11-500-01|Vulcanized corner
for 210-11-500-01 central seal gasket
255-11-908-01 |Black
250-11-170-01 |Black
250-11-270-01 |Black
EPDM|EPDM
|Piece
EPDM|EPDM
|Meters
EPDM|EPDM
|Meters
210-11-908-01|Vulcanized corner
for 210-11-908-01 central seal gasket
M11670
M11670 beauty profile gasket
M11670
M11670 beauty profile gasket
250-11-024-01 |Black
250-11-226-01 |Black
250-11-663-01 |Black
EPDM|EPDM
|Meters
EPDM|EPDM
|Meters
EPDM|EPDM
|Meters
M11228
M11228 beauty profile gasket
Waterproofing profile gasket
|Sealing gasket
250-11-165-01 |Black
200-06-860-01 |Black
200-06-860-12 |Grey
202-11-151-01 |Black
EPDM|EPDM
|Meters
|Sealing gasket
V4/2011
EPDM|EPDM
|Meters
EPDM|EPDM
|Meters
311
200-11-156-01 |Black
EPDM|EPDM
|Meters
200-11-157-01 |Black
EPDM|EPDM
|Meters
220-11-449-12 |Grey
PVC|PVC
|Meters
Glazing bead gasket
200-11-912-01 |Black
EPDM|EPDM
|Meters
|Simple brush
Brush with membrane
312
V4/2011
General Information
V4/2011
313
General Information
1.
.
,
.
.
,
.
,
/. 2,7 gr/cm2, 66%
. .
,
1:2 . ,
.
. Alumil
AW 6060
() 755-1.
755-2, 70kN/mm2.
755-3.
2.
2.1
(electronegativity) ,
, ,
.
. ()
, .
,
. ,
, ,
.
.
.
2.1 Metals
2.2
. , ,
.
.
.
,
.
, ,
.
2.3 /
,
( )
.
Alumil.
314
V4/2011
|General Information
3.
3. Surface treatment
EWAA-EURAS.
RAL
SABLE
White
Brown
RAL colours
Sable colours
Qualicoat.
4.
4. Storage
:
4.1
4.2 ,
.
.
4.3
.
4.4 .
5.
5. Aluminium maintenance
,
.
,
.
. ,
.
,
.
.
, .
.
,
.
,
LUMIL
SEASIDE CLASS, ALUMIL.
V4/2011
315
- - 1-2
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007) Parts 1-2
EN 12020-1
- EN AW-6060 EN AW-6063 - 1:
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical
conditions for inspection and delivery
EN 12020-2
- EN AW-6060 EN AW-6063 - 2:
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on
dimensions and form
EN 12046
- - 1-2
Operating forces - Test method - Part 1: Windows Part 2: Doors
EN 12152
- -
Curtain walling - Air permeability - Performance requirements and classification
EN 12153
- -
Curtain walling - Air permeability - Test method
EN 12154
- -
Curtain walling - Watertightness - Performance requirements and classification
EN 12155
- -
Curtain walling - Watertightness - Laboratory test under static pressure
EN 12179
- -
Curtain walling - Resistance to wind load - Test method
EN 12207
- -
Windows and doors - Air permeability - Classification
EN 12208
- -
Windows and doors - Watertightness - Classification
EN 12210
- -
Windows and doors - Resistance to wind load - Classification
EN 12211
- -
Windows and doors - Resistance to wind load - Test method
EN 12400
- -
Windows and pedestrian doors - Mechanical durability - Requirements and classification
EN 12519
-
Windows and pedestrian doors - Terminology
EN 12567
- - 1
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1-2
EN 13049
- - ,
Windows - Soft and heavy body impact - Test method, safety requirements and classification
EN 13115
- - ,
Windows - Classification of mechanical properties - Racking, torsion and operating forces
EN 13141
- / - 1-8
Ventilation for buildings - Performance testing of components/products for residential ventilation Parts 1-8
316
V4/2011
|General Information
, - - - 1-2
Windows, doors and shutters - Explosion resistance - Requirements and classification Parts 1-2
EN 13124
, - - - 1-2
Windows, doors and shutters - Explosion resistance - Test method Parts 1-2
ENV 13420
- -
Windows - Behaviour between different climates - Test method
EN 13501
- 1-5
Fire classification of construction products and building elements Parts 1-5
EN 13541
- -
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
EN 14351
- , - 1:
/
Windows and doors - Product standard, performance characteristics
EN 14600
/ -
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 14608
-
Windows - Determination of the resistance to racking
EN 14609
-
Windows - Determination of the resistance to static torsion
V4/2011
317
:
2011 ALUMIL A.E. , ,
.
, ,
. , , , ,
, .
. 2121/93 .
:
, .
, .
.
Copyright Notice:
Copyright 2011 Alumil S.A. All rights reserved. None of the materials provided on this manual may be used, reproduced or transmitted, in
whole or in part, in any form or by any means, manual electronic or mechanical, including photocopying, recording or the use of any information
storage and retrieval system without permission in writing from the publisher.
Disclaimer of Liability:
In preparation of this manual, every effort has been made to offer the most current, correct, and clearly expressed information possible.
Nevertheless, inadvertent errors in information may occur. In particular but without limiting anything here, Alumil S.A. disclaims any
responsibility for typing errors and inaccuracy of the information that may be contained in this manual. The information in this manual is subject
to change without notice to the User. Alumil S.A. and its authorized agents and dealers make no warranties or representations whatsoever
regarding the quality, content, completeness, suitability, adequacy, sequence, accuracy, or expiration of information contained in this manual.
318
V4/2011
|General Information
V4/2011
319
320
V4/2011